cranf ield precision ttg350 · grinding | ultra precision. ... — diamond turning – hard turning...
TRANSCRIPT
High Precision Freeform Machining Platform for components up to:- 100 mm diameter x 50 mm full form profile- 350 mm diameter on flat components
Cranf ield Precision TTG350Twin Turret Generator
• Hydrostatic Rotary and Linear Bearings• Linear Motor Drives• In-Situ Measuring Probe
Grinding | Ultra Precision
Copy
right
© 2
016
– Fi
ves
Land
is L
td. –
All
right
s re
serv
ed
CONTACT USCranfield PrecisionWoburn House, 3 Adams Close, Kempston, Bedford, MK42 7JE Phone: + 44 1234 312820 Fax: + 44 637121Email: [email protected]
Principle of operation
MACHINE PROCESS OPTIONS— Plunge mode: Plano, spheres (concave / convex)
— Generate mode: concave / convex aspheres, spheres
— Freeform mode: Surface generation
— Edging: Circular boundary
— Edging: Non symmetrical edge profiling
— Chamfering: (circular boundary)
— Coring
— Flat milling
— Scooping
— Slicing and dicing
— Prism cutting/grinding
— Milling
— Diamond turning – Hard turning
— Pre-polishing
www.fivesgroup.com
Aspheric and Freeform Generator
Typical components
The Cranfield Precision TTG machine has the capacity to produce components up to Ø350 mm.
— Hydrostatic turret bearings and workhead
— Air bearing grinding spindles
— Patented configuration
— Thermally isolated machine base
— Multiple grinding spindle configurations
— ’Tool Normal’ or axis perpendicular grinding capability
MACHINE CAPABILITY— < 1 µm P-V form accuracy
— < 2.5 nm Ra surface texture capability
— <1 arc sec turret accuracy
— Cranfield Precision CNC 6400 control system
Machine configuration with multiple options