cpe/enterprise demarcation – atn series · cpe/enterprise demarcation – atn series the atn...
TRANSCRIPT
CPE/Enterprise Demarcation – ATN Series
The ATN Series are multi-service CPE’s (customer premise
equipment) focused at the edge of metropolitan networks
and mobile networks. They can be equipped with FE, GE
and 10GE ports. The ATN and NE40E product series can
be used together to build an end-to-end layer 2 metro
Ethernet access or mobile backhaul network. The ATN
Series are aimed to help carriers overcome challenges over
resources, costs and services at the metro access layer.
When cooperating with the U2000, the Huawei NMS, and
ATN Series can help decrease the total cost of ownership
(TCO) for the network in an integrated manner and increase
efficiency for deployment and O&M.
Product Features
Layer 2 Capabilities and Protection
ATN product supports rich set of Layer 2 features including IEEE802.1q,
IEEE802.1p and IEEE 802.1ab. The ATN Series support G.8032 ERPS for
fast convergence. Other than Ethernet protection, MPLS techniques LSP
1:1, PW redundancy are also supported to provide alternative protection
schemes. The ATN series can provide carrier-class 50ms switching
protection.
Advance MPLS and Layer 3 Capabilities
ATN series products deliver MPLS transport for advanced Layer 2 and
Layer 3 VPN services as well as Pseudowire Emulation Edge to Edge
(PWE3). ATN products also offers full suite routing features including RIP,
OSPF, IS-IS, and BGP4.
Enhanced OAM
As network evolves from circuit to packet switched, it is critical for
carriers to deploy advanced OAM capabilities to monitor the health and
performance of the network, services offered and rapid fault location.
ATN Series supports:
• IEEE Std 802.1ag Connectivity Fault Management (CFM)
• IEEE Std 802.3ah (Ethernet in the First Mile (EFM)
• ITU-T Y.1731 Performance Monitoring:
• Other than Ethernet OAM, ATN Series also supports MPLS-TP OAM
Enhanced QoS
As today’s network carries not only multiple services but also has
different SLA towards each service and user. ATN supports a variety
of techniques to ensure QoS and SLA is maintained.
• Simple traffic classification
• Complex traffic classification
• Traffic policing and shaping
• Congestion avoidance and management
• Levels of HQoS that enables more specific scheduling
• MPLS DiffServ and MPLS TE that enables comprehensive
combination between QoS and MPLS
• Supports 512 flow queue and 64 subscriber queue per box
• Supports ingress metering per port, per port per CoS or VLAN
• Supports up to 512 ingress meters per box
Synchronization Technology
The robust clock distribution strategy of the ATN products
guarantees that a change in traffic conditions does not negatively
impact traffic. ATN series supports IEEE 1588V2 and synchronous
Ethernet. The ATN products clock solution fully satisfies requirements
for high-precision clocks on mobile backhaul networks.
ATN 905
ATN 910B
ATN 910I
Copyright © Huawei Technologies Co., Ltd. 2014. All Rights Reserved. The information contained in this document is for reference purpose only, and is subject to change or withdrawal according to specific customer requirements and conditions.
innovation through technology
Huawei Technologies (USA)5700 Tennyson Pkwy., Ste 500Plano, TX 75024Main: 214-919-6000Email: [email protected]
Huawei is a leading global provider of communication telecom networks and is currently serving 45 of the world’s top 50 telecom operators to support the communications of one-third of the world’s population. The company is committed to providing innovative and customized products, services and solutions to create long-term value and growth protential for its customers.For more information, please visit www.huawei.com/us.
Specification ATN 905 ATN 910i ATN 910B
Dimensions (Height x Width x Depth)
250mm x 180mm x 44mm 442mm x 220mm x 44.45mm 442mm x 220mm x 44.45mm
capacity 6Gswitching - 12 Gbps
Forwarding - 17.8 Mppsswitching - 44 Gbps
Forwarding - 66 Mpps
Interface2*FE/GE(O)+2*FE/GE(E)+2*FE/GE
Combo2*10G(O)+16GE/FE(O)+8GE/FE(E)
Operational Temperature -40°C to +65°C; passive cool -40°C to +65°C-40°C to +65°C (work)
-40°C to +70°C (storage)
Technical Specifications
Properties Details
Power RequirementAC: 90 to 260v
DC: -72v to -36v
L2 featureSupports IEEE802.1q, IEEE802.1p, IEEE 802.3ad, and IEEE 802.1ab
Supports STP/RSTP/MSTP, RRPP, and VLAN Switch
L3 feature
Supports IPv4
Supports OSPFv2, RIPv2, and IS-IS, BGPv4, and Static routing protocols
Supports dynamic ARP and static ARP table entries
Supports VLAN IF interface
MPLS feature
Supports LDP and RSVP-TE
Supports L2VPN (VPLS/H-VPLS/VLL)
Supports MPLS/BGP L3VPN
Supports MPLS-TP OAM
QoS
Supports DiffServ mode based on traffic classification
Supports traffic classification based on VLAN, 802.1p, and VLAN+802.1p
Supports WRED
Supports trTCM
Supports traffic shaping based on ports
Supports eight priority queues for each port
Supports PQ and WFQ scheduling modes
Supports 3 Levels HQoS
Supports LSP1:1, PW Redundancy, IP/LDP FRR, TE FRR, and VPN FRR
Supports NQA, MPLS TP OAM, BFD for LSP, PW, IGP, and IPv4
Supports IEEE 802.1ag, IEEE 802.3ah, and ITU-T Y.1731, Dying gasp
Clock Supports 1588v2 and Synchronous Ethernet clock