cover & care formulation guide - salvona
TRANSCRIPT
SourceDow Corning
Dow Corning
Sakamoto
BEZEMA AG
Sina
Emtech
Apple Chem
Dow Corning
Dow Corning
Sina
CCK
SH Energy
Emtech
--
--
Salvona
EverZinc
Sumitomo
Salvona
Sakamoto
10
Cover & Care Formulation Guide
Magic CC Cream
This CC cream provides moisturizing, coverage of pores and dark spots, and protection of skin from UV.
Procedure: Heat up Phase B until dissolved well. Disperse Phase C until dispersed well. Add Phase C into Phase B and stir them until completely dispersed. Pre-mix Phase D at 60°C until completely dissolved. Add Phase A into Phase B & C and disperse well. Add Phase D and mix until emulisified, then add Phase E mixed by hand.
% Wt.14.00
1.00
0.40
5.00
0.54
2.00
2.00
3.00
1.00
6.001.00
3.004.00
INCICyclotetrasiloxane, Cyclopentasiloxane
Phenyltrimethicone
Polyglyceryl-10 Decaisostearate
Cetyl PEG/PPG-10/1 Dimethicone
Diisostearyl Malate
Polymethyl Methacrylate
Lecithin, Polyhydroxystearic Acid, 2-Ethylhexyl Palmitate, Isopropyl Myristate, Isostearic Acid, Polyclyceryl-3 Polyricinoleate
Dimethicone, Dimethicone/Vinyl Dimethicone Crosspolymer
Dimethicone
Octyldodecyl MyriatateHexylene Glycol/Butylene Glycol/Decylene Glycol/Ethylhexylglycerine/Totarol
Nylon-12Polymethylsilsesquioxane, Silica
IngredientsDC-344
Phenyltrimethicone
S-Face IS-1009P
Beausil Wax 055
IndiEster DSM
Emsphere P60
Applecare A-100
OT-SEG SD20
Dimethicon 350CS
IndiEster ODMCCK-NP
Anybes PT-69Emsphere SD50
APH
ASE
BPH
ASE
CE
PHA
SE D
To 100
1.00
3.00
2.00
0.10
2.50
3.00
Water
Sodium Chloride
Titanium Dioxide/Aluminum Hydroxide/Dimethicone/Vinyl Dimethicone Crosspolymer
Zinc Oxide/Triethoxycaprylylsilane
Sodium Polyacrylate Starch
Color-changing Beads
Diglycerin
DI Water
Nacl
Lusil TiO2 407 MS6003
Zano 10 Plus
ST-100SP
SalColorFxTM White to Brown/Green/Red
Diglycerin S
SourceSalvona
EverZinc
--
Salvona
Salvona
--
Salvona
Salvona
Salvona
Salvona
Salvona
Dow Corning
B&B Cos
Salvona
SourceSalvona
Salvona
Sina
Salvona
Salvona
Emtech
Salvona
Salvona
Salvona
Salvona
Dow Corning
--
CCK
Salvona
Salvona
Cover & Care Formulation Guide
11
Translucent Loose Powder
Low-Cost Compact Powder
Translucent Loose Powder provides oil control and gives soft, smooth, and long-lasting control with MultiSal® technology.
This compact powder has a soft and natural finish by using low-cost ingredients.
Procedure: Grind Phase B by using mortar and add in mixer. Add Phase A and mix around 3 times with 25 seconds per time. Make sure that the pigment was dispersed well. Heat up Phase C at 60-70°C and spray on the surface gradually by making a hole and spraying it in, then mix it well. Repeat this until finishing Phase C. Mix 3 times with 25 seconds per time. Add Phase D and mix it well. Weigh and put it in the package.
Procedure: Grind Phase B by using mortar and add in mixer. Add Phase A and mix around 3 times with 25 seconds per time. Make sure that the pigment was dispersed well. Heat up Phase C at 60-70°C and spray on the surface gradually by making a hole and spraying it in, then mix it well. Repeat this until finishing Phase C. Mix 3 times with 25 seconds per time. Add Phase D and mix it well. Weigh in jar and press with pressure.
INCITalc, Dimethicone
Dimethicone, Vinyl Dimethicone Crosspolymer, Iron Oxide, Triethoxycaprylylsilane, Aluminum Hydroxide
Isononyl Isononate
Mica, Triethoxycaprylsilane
Dimethicone, Vinyl Dimethicone Crosspolymer, Iron Oxide, Triethoxycaprylylsilane, Aluminum Hydroxide
Encapsulated Zinc Sulfate
Mica, Dimethicone
Dimethicone, Vinyl Dimethicone Crosspolymer, Iron Oxide, Triethoxycaprylylsilane, Aluminum Hydroxide
Titanium Dioxide, Triethoxycaprylsilane, Aluminum Hydroxide
Iron Oxide, Perfluorohexylethylmethacrylate Copolymer
Dimethicone
Tocophenol Acetate
Hexylene Glycol/Butylene Glycol/Decylene Glycol/Ethylhexylglycerine/Totarol
Polymethyl MethacrylateSilica, Dimethicone
IngredientsDS Talc 46R MS3002
SP Black MS14012
IndiEster ININ
AS Mica MS1010
SP Yellow MS16012
MultiSal® Sebum Control
DS Sericite FSE MS3006
SP Red MS15012
AS TiO2 CR50 MS1003
GS Yellow Iron Oxide MS5009
Dimethicone 350cs
Tocophenol Acetate
CCK-NP
Emsphere P60DS Silica MS3011
% Wt.qs
0.25
1.00
10.00
1.70
1.00
15.00
0.40
3.00
0.20
1.50
0.05
0.60
5.00
5.00
PHA
SE A
PHA
SE B
PHA
SE C
ED
INCITalc, Dimethicone
Zinc Oxide, Triethoxycaprylylsilane, Aluminum Hydroxide
White Oil
Mica, Dimethicone
Iron Oxide, Acrylates/Perfluorohexyltheylmethacrylate
Talc, Dimethicone
Titanium Dixodie, Triethoxycaprylylsilane, Aluminum Hydroxide
Mica, Triethoxycaprylylsilane
Iron Oxide, Acrylates/Perfluorohexyltheylmethacrylate
Iron Oxide, Acrylates/Perfluorohexyltheylmethacrylate
Dimethicone
Ethylhexylglycerine
Magnesium Stearate
Sodium Starch Octenylsuccinate, Hydrated Silica, Acrylates Copolymer, Sodium Hydroxide, Zinc Sulfate, Butyrospermum Parkii (Shea) Butter, Lauryl Laurate
IngredientsDS Talc 46R MS3002
Zano 10 Plus
White Oil
DS Sericite FSE MS3006
Black Iron Oxide MS5009
DS Talc SF MS3001
AS TiO2 CR50 MS1003
AS Mica MS1010
Red Iron Oxide MS5009
Yellow Iron Oxide MS5009
Dimethicone 350cs
BEG-800
Mg StearateMultiSal® Sebum Control
% Wt.qs
3.00
2.16
5.00
0.15
10.00
12.00
5.00
0.25
2.30
0.54
0.30
1.80
0.20
PHA
SE A
PHA
SE B
PHA
SE C
D
Source--
Sakamoto
Sina
B&B Cos
SNF SAS
Salvona
New Jaffer
AMB
B&B Cos
Salvona
Salvona
MFCI
Sina
B&B Cos
Source--
--
Emtech
Wacker
--
Salvona
Sina
Elemtis Specialties
--
CCK
Salvona
Salvona
Sakamoto
Salvona
Salvona
Salvona
Cover & Care Formulation Guide
12
Flavor Cooling Matte Lip Liquid
Tone Up Cream
Easy to spread, not too matte, and does not make your lips dry or flaky.
Procedure: Heat Phase A until dissolved well. Disperse Phase B until mixed well. Add Phase B into Phase A, mixed with hands until homogenized. Add Phase C into Phase A & B.
Procedure: Heat Phase A until dissolved well. Disperse Phase B until mixed well. Add Phase B into Phase A, mixed with hands until homogenized. Add Phase C into Phase A & B.
% Wt.qs
3.00
4.50
10.00
0.10
10.00
5.00
2.50
3.00
0.50
5.00
3.00
10.00
INCIIsodododecane
Polyglyceryl-8 Decabehenate Carprate/Phosphoric Acid
Talc/Triethoxycaprylylsilane
Trimethylsiloxysilicate
Tocopherol Acetate
Titanium Dioxide/Aluminum Hydroxide/Triethoxycaprylylsilane
Isopropyl Myristate
Caprylic/Capric Treiglyceride, Stearalkonium Hecorite, Propylene Carbona
Bees Wax
Hexylene Glycol/Butylene Glycol/Decylene Glycol/Ethylhexylglycerine
Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer
Poly Methyl Methacrylate
Polyglyceryl-10 Decaethylhexanoate
Ingredients
Isodododecane
S-Face BC-810
AS Talc SF MS1001
Trimethylsiloxysilicate
Tocopherol Acetate
AS TiO2 407 MS1003
IndiEster IPM
Bentone Gel GTCCV
Bees Wax
CCK-NP
PSMQ
Emsphere P60
KEH-1010
PHA
SE A
PHA
SE B
C 4.00
4.00
3.00
Encapsulated Flavor/Menthyl Lactate
Iron Oxide/Triethoxycaprylylsilane
Iron Oxide/Triethoxycaprylylsilane
MultiSal® Flavor Cooling
Red Iron Oxide MS5009
Yellow Iron Oxide MS5009
This is a cream for preparing skin prior to applying makeup. After use, skin will look brighter and if used often, will provide a whitening effect.
% Wt.qs
3.00
1.00
3.00
5.00
0.70
0.10
0.50
3.00
3.00
3.00
2.00
2.00
INCIWater
Diglycerin
Octyl Methoxycinnamate
Butylene Glycol
Sodium Polyacrylate, C13-C14 Isoparaffin, Trideceth-6
Ethylhexylglycerine
Carbopol 940
Aloe Barbadensis Leaf Juice Powder
1, 2 Hexanediol
Titanium Dioxide, Triethoxycaprylylsilane, Aluminum Hydroixde
Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer
Isonoyl Isononanoate
Ethylhexyl Palmitate
Ingredients
DI Water
Diglycerin S
OMC
Butylene Glycol
Flocare ET25
BEG-800
NJGel A-940
AVG 200X
BH-780
AS TiO2 CR50 MS1003
PSMQ MS11012
IndiEster ININ
IndiEster IOP
PHA
SE A
PHA
SE B
C 2.50Encapsulated Alpha Arbutin and ResveratrolSalSphere® Light