cov fast stainless steel cat_3rd ed_jun 09
TRANSCRIPT
Product Easy Find
BOLTS 17-30
REFERENCE TABLES, CHARTS & ARTICLES 3-15
NUTS 31-38
WASHERS 39-46
SOCKET HEAD FASTENERS 47-58
METAL THREAD SCREWS 59-72
Hexagon Head Bolts Pg 19
Hexagon Head Set ScrewsPg 24
Cup Head BoltsPg 29
Hexagon Head Coach ScrewsPg 30
Crinkle WashersPg 45
Curved WashersPg 46
Cup WashersPg 46
NORD-LOCK WashersPg 46
Flat Head Socket ScrewsPg 49
Socket Head Cap ScrewsPg 51
Button Head Socket ScrewsPg 55
Hexagon Socket Set ScrewsPg 56
Metal Thread ScrewsPg 61
Hexagon Standard NutsPg 33
Nylon Insert Lock NutsPg 34
Hexagon Lock NutsPg 35
Dome Nuts
Pg 36
Two-Piece Dome NutsPg 37
Wing Nuts
Pg 37
Left Hand Nuts
Pg 38
Glenloch Nuts
Pg 38
Hexagon Weld NutsPg 38
Flat Round WashersPg 41
Mudguard WashersPg 43
Spring Washers Single CoilPg 43
Tooth Lock WashersPg 45
Serrated Tooth Lock WashersPg 45
Belleville WashersPg 45
SELF TAPPING AND WOODSCREWS 73-78
Self Tapping ScrewsPg 75
WoodscrewsPg 78
MISCELLANEOUS 79-86
SECURITY 87-94
HARDWARE 95-109
Threaded RodPg 81
U Drive ScrewsPg 81
Wing ScrewsPg 83
Thumb ScrewsPg 83
Cotter PinsPg 83
Spring PinsPg 84
Glenloch PinsPg 85
Engineers StudsPg 86
Flat Head NailsPg 86
One Way Raised CountersunkHead Self Tapping ScrewsPg 93
Vandal ProofBreakaway NutsPg 93
Post SocketKey and BitsPg 93
Post Torx® SocketKey and BitsPg 94
Eye Drive Bits
Pg 94
Eye Drive SecurityMachine ScrewsPg 89
Eye Drive Self TappingSecurity ScrewsPg 89
Post Hexagon Socket Security Machine ScrewsPg 90
Post Hexagon Socket SelfTapping Security ScrewsPg 92
Post Torx® Socket Security ScrewsPg 92
Wire RopePg 97
Fork TerminalsPg 98
Swage TerminalsPg 99
Rigging ScrewsPg 100
TurnbucklesPg 101
MiscellaneousBalustradingPg 102
FerrulesPg 103
ThimblesPg 103
Hooks/HingesPg 104
Pad EyesPg 105
Lag/Eye ScrewsPg 105
U BoltsPg 106
Eye NutsPg 106
Eye BoltsPg 106
SaddlesPg 106
ShacklesPg 107
SwivelsPg 108
ChainPg 109
Welded RingsPg 108
LinksPg 109
Specialised ToolsPg 109
LatchesPg 108
At Coventry Fasteners, our focus is on supplying the
right fastener products at the best value, in the shortest
possible time. Our far reaching network of branches,
specialist knowledge and huge range of standard and
specialised fasteners, means a streamlined service with
prompt delivery to any location around Australia.
As part of the publicly listed Australian company Coventry Group Ltd (ABN 37 008 670 102), Coventry Fasteners is the biggest name in fasteners with a proud history of servicing mining, construction and manufacturing industries.
The Coventry Fasteners business has been built through acquisition of strategic regional distributors across the country. Now with one consolidated
trading name and 47 branches throughout Australia stocked with a huge range of fasteners, we stand out as the premier fastener specialist in Australia.
We remain single-minded in our business approach because we understand customers want quality industrial fasteners with minimum fuss and maximum efficiency.
Connected to our customers like
no other fastener company
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
3AUSTRALIA’S FASTENER SPECIALISTS
SPECIALIST ADVICEU
NIT CO
NVERSIO
N FA
CTORS
to convert to multiply by
MASS 0.035274 ounce (oz) gram (g) 28.349 2.20462 pound (lb) kilogram (kg) 0.453592 0.001 tonne (metric ton or MT) kilogram (kg) 1000 0.984207 ton UK (long ton) tonne (t) 1.01605 0.001 kip pound (lb) 1000 446.43 x 10-6 ton UK (long ton) pound (lb) 2240
LENGTH 0.0393701 inch (in) millimetre (mm) 25.400 3.28084 foot (ft) metre (m) 0.3048 1.09361 yard metre (m) 0.91440 0.621371 mile kilometre (km) 1.60934 39.370 thou or mil millimetre (mm) 0.02540 0.001 millimetre (mm) micrometre (micron or m) 1000 0.02540 micrometre (micron or m) micro-inch ( ") 39.370
AREA 2.47105 acre hectare (ha) 0.40469 0.1550 sq.inch (in2) sq.centimetre (cm2) 6.4516 10.7639 sq.feet (ft2) sq.metre (m2) 0.092903 10000 sq.metre (m2) hectare (ha) 0.0001
VOLUME 0.21997 gal (UK) litre (l or L) 4.5461 0.26417 gal (US) litre (l or L) 3.7854 0.001 litre (l or L) millilitre (ml) 1000 0.035195 fluid ounce (fl oz) millilitre (ml) 28.413 1.7598 pint (UK) litre (l or L) 0.56826 0.001 cu.metre (m3) litre (l or L) 1000 0.061024 cu.inch (in3) millilitre (ml) 16.3871
FORCE 10-5 dyne newton (N) 10-5
0.10197 kilogram-force (kgf) newton (N) 9.80665 0.22481 pound-force (lbf) newton (N) 4.44822 2.2046 pound-force (lbf) kilogram-force (kgf) 0.45359 0.10036 ton-force (UK) kilonewton (kN) 9.9640
TORQUE 0.7376 pound-force foot (lbf ft) newton metre (Nm) 1.356 0.10197 kilogram-force metre (kgf m) newton metre (Nm) 9.80665 8.851 pound-force inch (lbf ft) newton metre (Nm) 0.1130
divide by to to convert divide by to to convert
to convert to multiply by
PRESSURE AND STRESS 1.000 newton/sq.metre (N/m2) pascal (Pa) 1.000 1.000 newton/sq.mm (N/mm2) megapascal (MPa) 1.000 0.001 megapascal (MPa) kilopascal (kPa) 1000 0.001 gigapascal (GPa) megapascal (MPa) 1000 0.006895 megapascal (MPa) pound-force/sq.inch 145.04 (lbf/in2 or psi) 0.001 ksi pound-force/sq.inch 1000 (lbf/in2 or psi) 15.444 megapascal (MPa) ton-force (UK)/sq.inch 0.06475 (tonf/in2) 10.000 millibar (mbar) kilopascal (kPa) 0.1000 33.86 millibar (mbar) inches mercury (inHg) 0.02953 68.948 millibar (mbar) pound-force/sq.inch 0.014504 (lbf/in2 or psi) 0.14504 pound-force/sq.inch kilopascal (kPa) 6.89476 (lbf/in2 or psi) 0.009869 atmosphere (atm) kilopascal (kPa) 101.32 0.06804 atmosphere (atm) pound-force/sq.inch 14.696 (lbf/in2 or psi)
DENSITY 0.001 gram/cu.centimetre (g/cm3) kilogram/cu.metre (kg/m3) 1000 36.127 x 10-6 pound/cu.inch (lb/in3) kilogram/cu.metre (kg/m3) 27680 16.0185 pound/cu.foot (lb/ft3) kilogram/cu.metre (kg/m3) 0.06243
ENERGY, WORK AND HEAT 0.73756 foot pound-force (ft lbf) joule (J) 1.35582 0.2388 calorie (cal) joule (J) 4.1868 1.10197 kilogram-force metre (kgf m) joule (J) 9.80665 9.478 x 10-4 British thermal unit (Btu) joule (J) 1055.1 0.27778 kilowatt hour (kWh) megajoule (MJ) 3.600 0.009478 therm megajoule (MJ) 105.51
POWER 1.000 watt (W) joule/sec (J/s) 1.000 1.3410 horsepower kilowatt (kW) 0.74570 3.4121 British thermal unit/hr (Btu/h) watt (W) 0.2931 0.8598 kilocalorie/hour (kcal/h) watt (W) 1.163 0.73757 foot pound-force/sec (ft lbf/s) watt (W) 1.3558 0.10197 kilogram-force metre/sec watt (W) 9.80665 (kgf m/s)
Reference: Australian Stainless Reference Manual 2008.
Unit conversion factors
LOOKING FOR CONSTRUCTION OR INDUSTRIAL FASTENERS?
Industrial and Construction fastener catalogues now available from your nearest branch.
4 AUSTRALIA’S FASTENER SPECIALISTS
BRANCHES AUSTRALIA WIDE
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SPA
NN
ER S
ELEC
TIO
N C
HA
RT
Spanner selection chartUNF/UNC
Thread Size Spanner Size A/F Spanner Opening inch inch min (mm) max (mm)
¹⁄₄ ⁷⁄₁₆ 11.18 11.33 ⁵⁄₁₆ ¹⁄₂ 12.80 12.95 ³⁄₈ ⁹⁄₁₆ 14.38 14.55 ⁷⁄₁₆ ⁵⁄₈ 15.98 16.15 ¹⁄₂ ³⁄₄ 19.18 19.38 ⁹⁄₁₆ ¹³⁄₁₆ 20.78 20.98 ⁵⁄₈ ¹⁵⁄₁₆ 23.98 24.21 ³⁄₄ 1 ¹⁄₈ 28.75 29.01 ⁷⁄₈ 1 ⁵⁄₁₆ 33.53 33.81 1 1 ¹⁄₂ 38.30 38.61 1 ¹⁄₈ 1 ¹¹⁄₁₆ 43.08 43.38 1 ¹⁄₄ 1 ⁷⁄₈ 47.88 48.21 1 ³⁄₈ 2 ¹⁄₁₆ 52.68 53.04 1 ¹⁄₂ 2 ¹⁄₄ 57.45 57.84 1 ³⁄₄ 2 ⁵⁄₈ 67.03 67.46 2 3 76.61 77.09 2 ¹⁄₄ 3 ³⁄₈ 86.18 86.72 2 ¹⁄₂ 3 ³⁄₄ 95.76 96.34 2 ³⁄₄ 4 ¹⁄₈ 105.33 105.97 3 4 ¹⁄₂ 114.91 115.57
METRIC
Thread Size Spanner Size A/F Spanner Opening mm min (mm) max (mm)
M 1.6 3.2 3.22 3.28 M 2.0 4.0 4.02 4.12 M 2.5 5.0 5.02 5.12 M 3.0 5.5 5.52 5.62 M 3.5 6.0 6.03 6.15 M 4.0 7.0 7.03 7.15 M 5.0 8.0 8.03 8.15 M 6.0 10.0 10.04 10.19 M 7.0 11.0 11.04 11.19 M 8.0 13.0 13.04 13.24 M 10.0 16.0 16.05 16.27 M 12.0 18.0 18.05 18.30 M 14.0 21.0 21.06 21.36 M 16.0 24.0 24.06 24.36 M 18.0 27.0 27.08 27.48 M 20.0 30.0 30.08 30.48 M 22.0 34.0 34.08 34.48 M 24.0 36.0 36.10 36.60 M 27.0 41.0 41.10 41.60 M 30.0 46.0 46.10 46.60 M 33.0 50.0 50.10 50.60 M 36.0 55.0 55.12 55.72 M 39.0 60.0 60.12 60.72 M 42.0 65.0 65.12 65.72 M 45.0 70.0 70.12 70.72 M 48.0 75.0 75.15 75.85 M 52.0 80.0 80.15 80.85 M 56.0 85.0 85.15 85.85 M 60.0 90.0 90.15 90.85 M 64.0 95.0 95.15 95.85 M 68.0 100.0 100.15 100.85 M 72.0 105.0 105.20 106.00 M 76.0 110.0 110.20 111.00 M 80.0 115.0 115.20 116.00 M 85.0 120.0 120.20 121.00 M 90.0 130.0 130.20 131.00 M 95.0 135.0 135.20 136.00 M 100.0 145.00 145.20 146.00 M 105.0 150.0 150.25 151.25 M 110.0 155.0 155.25 156.25 Reference: Fastener Black Book (First Edition), Pat Rapp.
BS (WHITWORTH)
Thread Size Spanner Size A/F Nearest Fitting Spanner Size A/F BS Whit inch (mm) inch mm
¹⁄₄ ³⁄₁₆ W .445 11.30 ⁷⁄₁₆ 12 ⁵⁄₁₆ ¹⁄₄ W .525 13.33 ¹⁷⁄₃₂ 14 ³⁄₈ ⁵⁄₁₆ W .600 15.24 ¹⁹⁄₃₂ 16 ⁷⁄₁₆ ³⁄₈ W .710 18.03 ²³⁄₃₂ 18 ¹⁄₂ ⁷⁄₁₆ W .820 20.83 ¹³⁄₁₆ 21 ⁹⁄₁₆ ¹⁄₂ W .920 23.37 ¹⁵⁄₁₆ 24 ⁵⁄₈ ⁹⁄₁₆ W 1.010 25.65 1 26 ³⁄₄ ¹¹⁄₁₆ W 1.200 30.48 1 ¹⁄₄ 31 ⁷⁄₈ ³⁄₄ W 1.300 33.02 1 ⁵⁄₁₆ 33 1 ⁷⁄₈ W 1.480 37.59 1 ¹⁄₄ 38 1 ¹⁄₈ 1 W 1.670 42.42 1 ¹¹⁄₁₆ 43 1 ¹⁄₄ 1 ¹⁄₈ W 1.860 47.24 1 ⁷⁄₈ 48 1 ³⁄₈ 1 ¹⁄₄ W 2.050 52.07 2 ¹⁄₁₆ 52 1 ¹⁄₂ 1 ³⁄₈ W 2.220 56.39 2 ¹⁄₄ 57 1 ³⁄₄ 1 ⁵⁄₈ W 2.580 65.53 2 ⁹⁄₁₆ 66 2 1 ³⁄₄ W 2.760 70.10 2 ³⁄₄ 70Note: Whitworth (W) = Old Standard BS = New Standard
ONLINE CATALOGUEVisit www.coventryfasteners.com.au to view current list prices for all products in our Stainless Steel, Industrial and Construction Fasteners catalogues. Current list prices at the click of a button – it’s just another way we’re making your job easier.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
5TH
READ
PITCH ID
ENTIFICATIO
N CH
ART
AUSTRALIA’S FASTENER SPECIALISTS
BRANCHES AUSTRALIA WIDEThread pitch identification chart Basic Major Dia Threads per Inch Metric Pitch (mm) Number Fraction Inch Metric Equiv. UNC UNF UNEF BSW BSF M Coarse Fine
No. 0 0.0600 1.524 80 ¹⁄₁₆ 0.0625 1.588 60 0.0630 1.600 M1.6 0.35 - No. 1 0.0730 1.854 64 72 0.0787 2.000 M2 0.4 - No. 2 0.0860 2.184 56 64 ³⁄₃₂ 0.0937 2.381 48 No. 3 0.0990 2.515 48 56 No. 4 0.1120 2.845 40 48 0.1181 3.000 M3 0.5 0.35 No. 5 0.1250 3.175 40 44 ¹⁄₈ 0.1250 3.175 40 No. 6 0.1380 3.505 32 40 ⁵⁄₃₂ 0.1563 3.969 32 0.1575 4.000 M4 0.7 0.5 No. 8 0.1640 4.166 32 36 ³⁄₁₆ 0.1875 4.762 24 32 No. 10 0.1900 4.826 24 32 0.1969 5.000 M5 0.8 0.5 No. 12 0.2160 5.486 24 28 32 ⁷⁄₃₂ 0.2188 5.556 24 0.2362 6.000 M6 1.0 0.75 ¹⁄₄ 0.2500 6.350 20 28 32 20 26 ⁵⁄₁₆ 0.3125 7.937 18 24 32 18 22 0.3150 8.000 M8 1.25 1.0 ³⁄₈ 0.3750 9.525 16 24 32 16 20 0.3937 10.000 M10 1.5 1.25 ⁷⁄₁₆ 0.4375 11.112 14 20 28 15 18 0.4724 12.000 M12 1.75 1.25 ¹⁄₂ 0.5000 12.700 13 20 28 12 16 0.5512 14.000 M14 2.0 1.5 ⁹⁄₁₆ 0.5625 14.288 12 18 24 12 16 ⁵⁄₈ 0.6250 15.875 11 18 24 11 14 0.6299 16.000 M16 2.0 1.5 0.7087 18.000 M18 2.5 1.5 ³⁄₄ 0.7500 19.050 10 16 20 10 12 0.7874 20.000 M20 2.5 1.5
Reference: Fastener Black Book (First Edition), Pat Rapp.
Contact your local Coventry Fasteners branch for more information on this product (see back of catalogue for your nearest branch).
Fastener Black Book (First Edition) The ultimate fastener reference book
• Screw thread fundamentals• Standards• Heat treatment• Thread classes• Grades• Materials & coatings• Failures & corrosion
• Thread terminology• Fastener strengths & markings• Tolerances• Hydrogen embrittlement• Screw thread profiles• Dimensional specifications
DIN / ISO / ANSI
• Galling• Material selection• Torque control• Platings• Elevated temperature
effects
A wealth of up-to-date, useful information within matt laminated greaseproof pages. Wire bound to stay flat on a workbench when reading, the Fastener Black Book is ideal for engineers, tradespeople, apprentices, machine shops, toolrooms and technical colleges.
What’s inside the Fastener Black Book:
Part No.: FASTBLACKBOOK
FREE
Thread pitch identifi catio
n ga
uge
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
6 AUSTRALIA’S FASTENER SPECIALISTS
SPECIALIST ADVICETA
PPIN
G R
ECO
MM
END
ATIO
NS
Recommended drilling sizes for tapping (using standard drills)UNC (UNIFIED NATIONAL COARSE)
Tap Size t.p.i. Tapping Drill Clearance Drill inch mm inch mm
No. 1 64 # 53 1.55 # 46 2.10 No. 2 56 # 51 1.85 # 41 2.50 No. 3 48 # 47 2.10 # 35 2.80 No. 4 40 # 43 2.35 # 30 3.30 No. 5 40 # 38 2.65 # 29 3.50 No. 6 32 # 36 2.85 # 25 3.80 No. 8 32 # 29 3.50 # 16 4.50 No. 10 24 # 25 3.90 # 7 5.10 No. 12 24 # 16 4.50 # 1 5.80 ¹⁄₄ 20 # 7 5.10 ¹⁷⁄₆₄ 6.80 ⁵⁄₁₆ 18 F 6.60 ²¹⁄₆₄ 8.50 ³⁄₈ 16 ⁵⁄₁₆ 8.00 ²⁵⁄₆₄ 10.00 ⁷⁄₁₆ 14 U 9.40 ¹⁵⁄₃₂ 12.00 ¹⁄₂ 13 ²⁷⁄₆₄ 10.80 ¹⁷⁄₃₂ 13.50 ⁹⁄₁₆ 12 ³¹⁄₆₄ 12.20 ³⁹⁄₆₄ 15.50 ⁵⁄₈ 11 ¹⁷⁄₃₂ 13.50 ¹¹⁄₁₆ 17.50 ³⁄₄ 10 ²¹⁄₃₂ 16.50 ¹³⁄₁₆ 20.50 ⁷⁄₈ 9 ⁴⁹⁄₆₄ 19.50 ¹⁵⁄₁₆ 23.50 1 8 ⁷⁄₈ 22.25 1 ³⁄₃₂ 27.50 1 ¹⁄₈ 7 ⁶³⁄₆₄ 25.00 1 ⁷⁄₃₂ 31.00 1 ¹⁄₄ 7 1 ⁷⁄₆₄ 28.00 1 ¹¹⁄₃₂ 34.00 1 ³⁄₈ 6 1 ⁷⁄₃₂ 30.50 1 ¹⁄₂ 38.00 1 ¹⁄₂ 6 1 ¹¹⁄₃₂ 34.00 1 ⁵⁄₈ 41.00 1 ³⁄₄ 5 1 ⁹⁄₁₆ 39.50 1 ⁷⁄₈ 48.00 2 4.5 1 ²⁵⁄₃₂ 45.00 2 ¹⁄₈ 54.00
UNF (UNIFIED NATIONAL FINE)
Tap Size t.p.i. Tapping Drill Clearance Drill inch mm inch mm
No. 0 80 ³⁄₆₄ 1.20 # 48 1.90 No. 1 72 # 53 1.50 # 46 2.10 No. 2 64 # 50 1.80 # 41 2.50 No. 3 56 # 45 2.10 # 35 2.80 No. 4 48 # 42 2.40 # 30 3.30 No. 5 44 # 37 2.70 # 29 3.50 No. 6 40 # 33 2.90 # 25 3.80 No. 8 36 # 29 3.50 # 16 4.50 No. 10 32 # 21 4.10 # 7 5.10 No. 12 28 # 14 4.70 # 1 5.80 ¹⁄₄ 28 # 3 5.50 ¹⁷⁄₆₄ 6.80 ⁵⁄₁₆ 24 I 6.90 ²¹⁄₆₄ 8.50 ³⁄₈ 24 Q 8.50 ²⁵⁄₆₄ 10.00 ⁷⁄₁₆ 20 ²⁵⁄₆₄ 9.90 ¹⁵⁄₃₂ 12.00 ¹⁄₂ 20 ²⁹⁄₆₄ 11.50 ¹⁷⁄₃₂ 13.50 ⁹⁄₁₆ 18 ³³⁄₆₄ 12.90 ³⁹⁄₆₄ 15.50 ⁵⁄₈ 18 ³⁷⁄₆₄ 14.50 ¹¹⁄₁₆ 17.50 ³⁄₄ 16 ¹¹⁄₁₆ 17.50 ¹³⁄₁₆ 20.50 ⁷⁄₈ 14 ¹³⁄₁₆ 20.50 ¹⁵⁄₁₆ 23.50 1 12 ⁵⁹⁄₆₄ 23.25 1 ³⁄₃₂ 27.50 1* 14 ¹⁵⁄₁₆ 23.50 1 ³⁄₃₂ 27.50 1 ¹⁄₈ 12 1 ³⁄₆₄ 26.50 1 ⁷⁄₃₂ 31.00 1 ¹⁄₄ 12 1 ¹¹⁄₆₄ 29.50 1 ¹¹⁄₃₂ 34.00 1 ³⁄₈ 12 1 ¹⁹⁄₆₄ 32.75 1 ¹⁄₂ 38.00 1 ¹⁄₂ 12 1 ²⁷⁄₆₄ 36.00 1 ⁵⁄₈ 41.00
* UNS
UN (UNIFIED NATIONAL) CONSTANT PITCH SERIES
Tap Size t.p.i. Tapping Drill Clearance Drill inch mm inch mm
1 ¹⁄₈ 8 1 25.30 1 ⁷⁄₃₂ 31.00 1 ¹⁄₄ 8 1 ¹⁄₈ 28.50 1 ¹¹⁄₃₂ 34.00 1 ³⁄₈ 8 1 ¹⁄₄ 31.60 1 ¹⁄₂ 38.00 1 ¹⁄₂ 8 1 ³⁄₈ 34.80 1 ⁵⁄₈ 41.00 1 ⁵⁄₈ 8 1 ¹⁄₂ 38.00 1 ³⁄₄ 45.00 1 ³⁄₄ 8 1 ⁵⁄₈ 41.20 1 ⁷⁄₈ 48.00 1 ⁷⁄₈ 8 1 ³⁄₄ 44.30 2 51.00 2 8 1 ⁷⁄₈ 47.50 2 ¹⁄₈ 54.00 2 ¹⁄₄ 8 2 ⁵⁄₃₂ 55.00 2 ³⁄₈ 61.00
UNEF (UNIFIED NATIONAL EXTRA FINE)
Tap Size t.p.i. Tapping Drill Clearance Drill inch mm inch mm
No. 12 32 # 13 4.70 ¹⁄₄ 6.30 ¹⁄₄ 32 # 3 5.50 ⁹⁄₃₂ 7.00 ⁵⁄₁₆ 32 K 7.10 ¹¹⁄₃₂ 8.70 ³⁄₈ 32 R 8.60 ¹³⁄₃₂ 10.30 ⁷⁄₁₆ 28 X 10.10 ¹⁵⁄₃₂ 12.00 ¹⁄₂ 28 ²⁹⁄₆₄ 11.70 ⁹⁄₁₆ 14.00 ⁹⁄₁₆ 24 ³³⁄₆₄ 13.00 ³⁹⁄₆₄ 15.50 ⁵⁄₈ 24 ³⁷⁄₆₄ 14.75 ¹¹⁄₁₆ 17.50 ¹¹⁄₁₆ 24 ⁴¹⁄₆₄ 16.25 ³⁄₄ 19.00
Reference: Fastener Black Book (First Edition), Pat Rapp.
For the latestproducts and special offers
pick up a free copy of
Fastener Torque from your
nearest branch.
STAY INFORMED WITH FASTENER TORQUE.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
7AUSTRALIA’S FASTENER SPECIALISTS
SPECIALIST ADVICETA
PPING
RECOM
MEN
DATIO
NS
DOES IT FIT?Choosing the correct fastener for the job is essential. If you’re not sure of the grade, protective coating, head type or thread for the job ask us. Specialist advice is another way we’re making your job easier. Turn to back cover for your nearest branch.
M (ISO METRIC COARSE)
Tap Size Pitch Tapping Drill Clearance Drill inch mm inch mm
M 1.6 0.35 # 55 1.25 # 50 1.80 M 2 0.40 # 52 1.60 # 42 2.40 M 2.5 0.45 # 46 2.05 # 33 2.90 M 3 0.50 # 40 2.50 # 29 3.40 M 3.5 0.60 # 33 2.90 # 23 3.90 M 4 0.70 # 30 3.30 # 16 4.50 M 5 0.80 # 19 4.20 # 3 5.50 M 6 1.00 # 9 5.00 F 6.60 M 8 1.25 H 6.80 T 9.00 M 10 1.50 Q 8.50 ⁷⁄₁₆ 11.00 M 12 1.75 ¹³⁄₃₂ 10.30 ¹⁷⁄₃₂ 13.50 M 14 2.00 ¹⁵⁄₃₂ 12.00 ³⁹⁄₆₄ 15.50 M 16 2.00 ³⁵⁄₆₄ 14.00 ¹¹⁄₁₆ 17.50 M 18 2.50 ³⁹⁄₆₄ 15.50 ²⁵⁄₃₂ 20.00 M 20 2.50 ¹¹⁄₁₆ 17.50 ⁷⁄₈ 22.00 M 22 2.50 ⁴⁹⁄₆₄ 19.50 ¹⁵⁄₁₆ 24.00 M 24 3.00 ⁵³⁄₆₄ 21.00 1 ¹⁄₃₂ 26.00 M 27 3.00 ⁶¹⁄₆₄ 24.00 1 ³⁄₁₆ 30.00 M 30 3.50 1 ³⁄₆₄ 26.50 1 ⁵⁄₁₆ 33.00 M 33 3.50 1 ⁵⁄₃₂ 29.50 1 ¹³⁄₃₂ 36.00 M 36 4.00 1 ¹⁷⁄₆₄ 32.00 1 ¹⁷⁄₃₂ 39.00 M 42 4.50 1 ¹⁵⁄₃₂ 37.50 1 ²⁵⁄₃₂ 45.00 M 48 5.00 1 ⁴⁵⁄₆₄ 43.00 2 ¹⁄₁₆ 52.00 M 52 5.00 1 ⁵⁵⁄₆₄ 47.00 2 ⁷⁄₃₂ 56.00 M 56 5.50 2 50.50 2 ⁷⁄₁₆ 62.00
UNS (UNIFIED NATIONAL SPECIAL)
Tap Size t.p.i. Tapping Drill inch mm
¹⁄₄ 36 # 1 5.70 ¹⁄₄ 40 A 5.80 ⁵⁄₁₆ 36 L 7.30 ⁵⁄₁₆ 40 M 7.40 ³⁄₈ 36 S 8.90 ³⁄₈ 40 T 9.00 ⁷⁄₁₆ 18 W 9.90 ⁷⁄₁₆ 24 Y 10.20 ¹⁄₂ 12 ²⁷⁄₆₄ 10.90 ¹⁄₂ 14 ⁷⁄₁₆ 11.20 ¹⁄₂ 18 ²⁹⁄₆₄ 11.50 ¹⁄₂ 24 ¹⁵⁄₃₂ 11.80 ⁹⁄₁₆ 14 ¹⁄₂ 12.80 ⁵⁄₈ 14 ³⁷⁄₆₄ 14.50 ³⁄₄ 14 ⁴⁵⁄₆₄ 17.50 ³⁄₄ 18 ²³⁄₃₂ 18.00 ³⁄₄ 24 ⁴⁷⁄₆₄ 18.25 ⁷⁄₈ 10 ⁵¹⁄₆₄ 20.00 ⁷⁄₈ 18 ⁵³⁄₆₄ 21.00 ⁷⁄₈ 24 ²⁷⁄₃₂ 21.25 1 14 ¹⁵⁄₁₆ 24.00 1 18 ⁶¹⁄₆₄ 24.25 1 24 ³¹⁄₃₂ 26.50 1 ¹⁄₈ 10 1 ³⁄₆₄ 26.50 1 ¹⁄₈ 14 1 ⁵⁄₆₄ 27.00 1 ¹⁄₈ 24 1 ³⁄₃₂ 27.75 1 ¹⁄₄ 10 1 ¹¹⁄₆₄ 29.75 1 ¹⁄₄ 14 1 ¹³⁄₆₄ 30.25 1 ¹⁄₄ 24 1 ¹⁵⁄₆₄ 31.00
ISO Rc SERIES BSPT (BRITISH STANDARD PIPE TAPER)
Tap Size t.p.i. Tapping Drill inch mm
¹⁄₁₆ 28 F 6.40 ¹⁄₈ 28 Q 8.40 ¹⁄₄ 19 ⁷⁄₁₆ 11.20 ³⁄₈ 19 ³⁷⁄₆₄ 14.75 ¹⁄₂ 14 ²³⁄₃₂ 18.25 ³⁄₄ 14 ¹⁵⁄₁₆ 23.75 1 11 1 ³⁄₁₆ 30.00 1 ¹⁄₄ 11 1¹⁷⁄₃₂ 38.50
Reference: Fastener Black Book (First Edition), Pat Rapp.
MF (ISO METRIC FINE)
Tap Size Pitch Tapping Drill Clearance Drill inch mm inch mm
MF 8 1.0 J 7.0 T 9.00 MF 10 1.25 S 8.8 ⁷⁄₁₆ 11.00 MF 12 1.25 ²⁷⁄₆₄ 10.8 ¹⁷⁄₃₂ 13.50 MF 12** 1.5 Z 10.5 ¹⁷⁄₃₂ 13.50 MF 14 1.5 ³¹⁄₆₄ 12.5 ³⁹⁄₆₄ 15.50 MF 16 1.5 ⁹⁄₁₆ 14.5 ¹¹⁄₁₆ 17.50 MF 18 1.5 ²¹⁄₃₂ 16.5 ²⁵⁄₃₂ 20.00 MF 20 1.5 ⁴⁷⁄₆₄ 18.5 ⁷⁄₈ 22.00 MF 22 1.5 ¹³⁄₁₆ 20.5 ¹⁵⁄₁₆ 24.00
** Alternative Metric Fine
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
8TA
PPIN
G R
ECO
MM
END
ATIO
NS
AUSTRALIA’S FASTENER SPECIALISTS
FAST DELIVERYISO G SERIES BSP (BRITISH STANDARD PIPE) (PARALLEL)
Tap Size t.p.i. Tapping Drill inch mm
¹⁄₁₆ 28 H 6.80 ¹⁄₈ 28 S 8.80 ¹⁄₄ 19 ¹⁵⁄₃₂ 11.80 ³⁄₈ 19 ³⁹⁄₆₄ 15.25 ¹⁄₂ 14 ³⁄₄ 19.00 ³⁄₄ 14 ³¹⁄₃₂ 24.50 1 11 1 ⁷⁄₃₂ 30.75 1 ¹⁄₄ 11 1 ⁹⁄₁₆ 39.50
NPT (NATIONAL PIPE TAPER)
Tap Size t.p.i. Tapping Drill inch mm
¹⁄₁₆ 27 D 6.30 ¹⁄₈ 27 R 8.50 ¹⁄₄ 18 ⁷⁄₁₆ 11.00 ³⁄₈ 18 ³⁷⁄₆₄ 14.50 ¹⁄₂ 14 ⁴⁵⁄₆₄ 18.00 ³⁄₄ 14 ²⁹⁄₃₂ 23.00 1 11 ¹⁄₂ 1 ⁹⁄₆₄ 29.00 1 ¹⁄₄ 11 ¹⁄₂ 1 ¹⁄₂ 38.00 1 ¹⁄₂ 11 ¹⁄₂ 1 ⁴⁷⁄₆₄ 44.00 2 11 ¹⁄₂ 2 ⁷⁄₃₂ 56.00
NPS (NATIONAL PIPE STRAIGHT)
Tap Size t.p.i. Tapping Drill inch mm
¹⁄₈ 27 S 9.00 ¹⁄₄ 18 ²⁹⁄₆₄ 11.50 ³⁄₈ 18 ¹⁹⁄₃₂ 15.00 ¹⁄₂ 14 ⁴⁷⁄₆₄ 18.50 ³⁄₄ 14 ¹⁵⁄₁₆ 23.50 1 11 ¹⁄₂ 1 ³⁄₁₆ 30.00 1 ¹⁄₄ 11 ¹⁄₂ 1 ³³⁄₆₄ 38.50 1 ¹⁄₂ 11 ¹⁄₂ 1 ³⁄₄ 44.50 2 11 ¹⁄₂ 2 ⁷⁄₃₂ 57.00
BSF (BRITISH STANDARD FINE)
Tap Size t.p.i. Tapping Drill inch mm
³⁄₁₆ 32 # 21 4.00 ⁷⁄₃₂ 28 # 14 4.60 ¹⁄₄ 26 # 4 5.30 ⁵⁄₁₆ 22 H 6.80 ³⁄₈ 20 P 8.30 ⁷⁄₁₆ 18 W 9.70 ¹⁄₂ 16 ⁷⁄₁₆ 11.00 ⁹⁄₁₆ 16 ¹⁄₂ 12.70 ⁵⁄₈ 14 ⁹⁄₁₆ 14.00 ³⁄₄ 12 ²¹⁄₃₂ 16.50
BSW (BRITISH STANDARD WHITWORTH)
Tap Size t.p.i. Tapping Drill inch mm
¹⁄₁₆ 60 # 56 1.20 ³⁄₃₂ 48 # 49 1.85 ¹⁄₈ 40 # 38 2.55 ⁵⁄₃₂ 32 # 30 3.20 ³⁄₁₆ 24 # 26 3.70 ⁷⁄₃₂ 24 # 15 4.50 ¹⁄₄ 20 # 7 5.10 ⁵⁄₁₆ 18 F 6.50 ³⁄₈ 16 O 7.90 ⁷⁄₁₆ 14 U 9.20 ¹⁄₂ 12 Z 10.50 ⁹⁄₁₆ 12 ³¹⁄₆₄ 12.00 ⁵⁄₈ 11 ³⁵⁄₆₄ 13.50
METRIC SPARK PLUG
Tap Size Tapping Drill inch mm
M 10 x 1.0 T 9.00 M 12 x 1.25 ²⁷⁄₆₄ 10.80 M 14 x 1.25 ¹⁄₂ 12.80 M 18 x 1.5 ²¹⁄₃₂ 16.50
THREAD FORMING (FLUTELESS TAPS) METRIC COARSE
Tap Size Tapping Drill inch mm
M 3 x 0.5 # 34 2.80 M 4 x 0.7 # 26 3.70 M 5 x 0.8 # 14 4.60 M 6 x 1.0 ⁷⁄₃₂ 5.50 M 8 x 1.25 ¹⁹⁄₆₄ 7.40 M 10 x 1.5 ²³⁄₆₄ 9.30
Reference: Fastener Black Book (First Edition), Pat Rapp.
THREAD FORMING (FLUTELESS TAPS) UNC AND UNF
Tap Size UNC UNF t.p.i. Tapping Drill t.p.i. Clearance Drill inch mm inch mm
No. 1 64 # 51 1.70 72 # 51 1.70 No. 2 56 # 46 2.00 64 # 46 2.00 No. 3 48 # 42 2.30 56 # 42 2.30 No. 4 40 # 37 2.60 48 # 37 2.60 No. 5 40 # 32 2.90 44 # 32 2.90 No. 6 32 # 30 3.20 40 # 30 3.20 No. 8 32 # 24 3.80 36 # 23 3.90 No.10 24 # 16 4.40 32 # 15 4.50 No.12 24 # 8 5.00 28 # 7 5.10 ¹⁄₄ 20 A 5.80 28 B 6.00 ⁵⁄₁₆ 18 L 7.30 24 ¹⁹⁄₆₄ 7.50 ³⁄₈ 16 S 8.80 24 ²³⁄₆₄ 9.10 ⁷⁄₁₆ 14 ¹³⁄₃₂ 10.30 20 ²⁷⁄₆₄ 10.60
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
9TEN
SILE STRENG
TH CO
MPA
RISON
CHA
RTAUSTRALIA’S FASTENER SPECIALISTS
FAST DELIVERYTensile strength comparison chart
The strengths of a product group of fasteners are expressed:
• in the imperial system as grades• in the metric system as product class
The approximate tensile strength comparison of steel grades and classes:
Accurate Conversion factors 1000 PSI(Ibf/in2) = 6.8948 MPa 1 Mpa = 145.038 PSI(Ibf/in2)
Ibf/in2
(PSI)
SAE Grade 8 (AS 2465) (High Tensile) ........... 150 000
SAE Grade 5 (AS 2465) (High Tensile) ........... 120 000
87 000
65 000
BSW Mild Steel (AS 2451) ........... 62 000
58 015
Mpa (N/mm2)
1 200 .......... Class 12.9 (AS 1110) (High Tensile)
1 100
1 034 .......... Class 10.9 (AS 1110) (High Tensile) 1 000
900
600
550
520 ............. Class 5.8 (AS 1110)
450
427
METRICIMPERIAL
STAINLESS PROPERTY CLASS 70e.g. 304-70,316-70 101 000
STAINLESS PROPERTY CLASS 80e.g. 316-80, 2343 & A4-80 116 000
STAINLESS PROPERTY CLASS 50e.g. No Markings 72 000
827 ............Class 8.8 (AS 1110) (High Tensile) OR High Strength Steel (Structural) (AS 1252)
STAINLESS PROPERTY CLASS 80e.g. A4-80 & 2343800
STAINLESS PROPERTY CLASS 70e.g. Typical A2-70 (304), A4-70 (316)700
STAINLESS PROPERTY CLASS 50e.g. No Markings500
400 ......
......
Class 4.6 (AS 1111)
Mild Steel (AS 1390)
WE ALSO SUPPLY INDUSTRIAL, CONSTRUCTION AND SPECIALISED FASTENERS AS WELL AS ASSOCIATED TOOLS AND CONSUMABLES.
Call your nearest branch now for a catalogue.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
10ST
AIN
LESS
STE
ELAUSTRALIA’S FASTENER SPECIALISTS
FRIENDLY SERVICEIntroduction to stainless steel
Austenitic Stainless Steel Grade 304 vs Grade 316
What is stainless steel?
Stainless steel is a generic term for a group of corrosion resistant steels containing a minimum of 10.5% of chromium. Varying additions of nickel, molybdenum, titanium, niobium and other elements may also be present.
Corrosion resistance
All stainless steels have a high resistance to corrosion. This remarkable resistance to attack is due to the naturally occurring chromium-rich oxide film present on the surface of the steel.
Although extremely thin, this invisible, inert and therefore passive film is tightly adherent to the metal and extremely protective in a wide range of corrosive media. This film is rapidly self-repairing in the presence of oxygen and damage by abrasion, cutting or machining is instantaneously repaired.
Types of stainless steel
There are five basic categories of stainless steel: austenitic, ferritic, duplex, martensitic and precipitation hardening.
The basic composition of the austenitic stainless steels is 18% chromium (Cr) and 8% nickel (Ni) – this is grade 304. If additional corrosion resistance is required 2% molybdenum (Mo) is added, termed grade 316.
Basic properties of austenitic stainless steels include:• Excellent corrosion resistance• Excellent cleanability and hygiene factor• Fabricated and formed with ease• Excellent weldability• Hardened by cold work, not by heat
treatment• Usually used in the fully annealed
condition in which they are essentially non-magnetic
The austenitic grades are non-magnetic and in addition to chromium, typically at the 18% level, contain nickel (which improves fabrication and corrosion resistance) and are the most widely used group of stainless steels. Common uses and applications cover an extremely wide scope such as hollowware, builders hardware, architectural applications, abattoir, beer and beverage production and food processing equipment (which require the cleanability and hygienic corrosion resistant properties).
The ferritic grades are magnetic, have a low carbon content and contain chromium as the main alloying element, typically at the 13% and 17% levels. Common uses include builders hardware, domestic appliances, (dishwashers, clothes dryers), and architectural and automotive trim.
Duplex stainless steels have a mixed ferritic/austenitic structure. Chromium content varies from 18 to 28% and nickel from 4.5 to 8%. Duplex grades find application particularly where chlorides are present such as tanks and vessels for sea water
• The ability to handle both extremely low (cryogenic) temperatures and, depending on the load and permissible distortion, higher service temperatures of around 600˚C – or even higher if scaling resistance is the principal consideration
Generally, stainless steel fasteners are produced from grade 304 (A2), grade 316 (A4) or for less demanding applications, grade 303 (A1). Grade classifications A1, A2 and A4 are in accordance with International Standard ISO 3506; head markings often show this classification (see page 12 in this catalogue for more details on fastener head markings).
cooling, desalination, food pickling plants and aggressive mine waters.
The martensitic grades are magnetic, containing typically 12% chromium and a moderate carbon content. They are hardenable by quenching and tempering like plain carbon steels and find application mainly in cutlery manufacture, aerospace and general engineering.
Precipitation hardening steels have chromium content at 17% typically with additions of nickel, copper and niobium for strengthening. They are capable of achieving very high strengths with proof stresses in the 1000 to 1500 megapascals (MPa) range depending on the type and actual heat treatment. These stainless steels are ideal for the production of long, straight high strength shafts for pumps and valve spindles.
Austenitic and ferritic grades account for approximately 95% of stainless steel applications, including fasteners.
Grade 304 – the place to start
Grade 304 accounts for more than 50% of all stainless steel produced, represents between 50 and 60% of Australia’s consumption of stainless materials, and finds applications in almost every industry.
Grade 304 has excellent corrosion resistance in a wide range of media. It resists ordinary rusting in most architectural applications. It is also resistant to most food processing environments, can be readily cleaned, and resists organic chemicals, dye stuffs and a wide variety of inorganic chemicals.
In warm chloride environments, 304 is subject to pitting and crevice corrosion and to stress corrosion cracking when
1
Protective coating
FIGURE 1: In any normal oxidising environment a protective coating of passive chromium rich oxide film is automatically formed on stainless steel.
FIGURE 1, 2 AND 3 PROTECTIVE COATING OF STAINLESS STEEL
FIGURE 2: When scratched, damaged or machined this protective film is denuded, exposing the steel to the atmosphere.
FIGURE 3: The protective coating is quickly restored through the rapid self-repairing quality of the chromium rich film.
2
Protective coating
3
Protective coating
Reference: Australian Stainless Reference Manual 2008.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
11STA
INLESS STEEL
AUSTRALIA’S FASTENER SPECIALISTS
FRIENDLY SERVICEsubjected to tensile stresses beyond about 50˚C. However, it can be successful in warm chloride environments where exposure is intermittent and cleaning is a regular event.
Alternative grades to 304 should be considered in certain environments and applications, including marine conditions, environments with temperatures above 50-60˚C and with chlorides present, and applications requiring heavy section welding, substantial machining, high strength or hardness, or strip with very high cold-rolled strength.
However, typical applications for 304 include internal or rural architecture, domestic kitchens, food processing equipment, hospital equipment, dairy equipment, brewing equipment, bulk milk coolers, refrigeration equipment, beer barrels and wine tanks. With this breadth of application, grade 304 has become a fundamental alloy in modern industry.
MECHANICAL PROPERTIES OF GRADE304 (ANNEALED CONDITIONS) GIVENIN ASTM A240M
Tensile strength 515MPa min
0.2% proof stress 205MPa min
Elongation 40% min
Brinell hardness 201HB max
Rockwell hardness 92HRB max
Note: Slightly different properties are given in other specifications.
PHYSICAL PROPERTIES OF GRADE304 (TYPICAL VALUES IN ANNEALEDCONDITION)
Density 7,900kg/m3
Elastic modulus 200GPa
Mean coefficient of thermal expansion
20-100°C 16.0 m/m/°C
20-300°C 17.0 m/m/°C
20-500°C 18.0 m/m/°C
Thermal conductivityat 100°C 15W/m.K
Specific heat 20°C 500J/kg.K
Electrical conductivity 730nOhms.m
Grade 316 – the next step up
If a job requires greater corrosion resistance than grade 304 can provide, grade 316 is ‘the next step up’.
Grade 316 has virtually the same mechanical, physical and fabrication characteristics as 304 with better corrosion resistance, particularly to the pitting corrosion in chloride environments. An additional 2%
molybdenum in grade 316 further improves its corrosion resistance when compared to grade 304.
Grade 316 is the second most popular grade in the stainless steel family. It accounts for about 20% of all stainless steel produced.
Grade 316 has excellent corrosion resistance in a wide range of media. It resists ordinary rusting in virtually all architectural applications and is often chosen for more aggressive environments such as sea-front buildings and fittings on wharves and piers. It is also resistant to most food processing environments, can be readily cleaned and resists organic chemicals, dye stuffs and a wide variety of inorganic chemicals.
Grade 316 is commonly termed “marine grade” stainless. Grade 316 offers a solution to around 90% of marine applications and is suitable for the construction of deck fittings and critical rigging components where salt can concentrate and/or lie in crevices, being conditions which are likely to cause pitting of grade 304.
Other typical applications for 316 include exterior architecture, chemical processing, textile manufacture, pulp and paper equipment, sewerage/effluent plants, pumping stations, dyeing equipment and food processing equipment where salt is present.
In hot chloride environments, grade 316 is subject to pitting and crevice corrosion and to stress corrosion cracking when subjected to tensile stresses beyond
about 50˚C. In these severe environments duplex grades such as 2205 or higher alloy austenitic grades including 6% molybdenum grades are more appropriate choices. Alternative grades to 316 should also be considered in other environments and applications including strong reducing acids and applications requiring heavy section welding, substantial machining, high strength or hardness.
MECHANICAL PROPERTIES OF GRADE316 (ANNEALED CONDITION) GIVENIN ASTM A240M
Tensile strength 515MPa min
0.2% proof stress 205MPa min
Elongation 40% min
Brinell hardness 217HB max
Rockwell hardness 95HRB max
Note: Slightly different properties are given in other specifications.
PHYSICAL PROPERTIES OF GRADE316 (TYPICAL VALUES IN ANNEALEDCONDITION)
Density 8,000kg/m3
Elastic modulus 200GPa
Mean coefficient of thermal expansion
20-100°C 16.0 m/m/°C
20-300°C 17.0 m/m/°C
20-500°C 18.0 m/m/°C
Thermal conductivity at 100°C 16.3W/m.K
Specific heat 20°C 500J/kg.K
Electrical resistivity 20°C 750nOhm.m
Grade 316 is ideal for marine environments due to its rust resistance. (Reference: Australian Stainless Reference Manual 2008).
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
12
XYZ
Manufacturer
SteelGrade
PropertyClass
Alternative forms for socket screws.
XYZ A2-70
A2-70 A2-50
XYZ
A4-70
XYZ
Points to note:
• Product markings are not uniform over all stainless fasteners
• Where A2 and A4 are used without property class, assume it is the lowest strength grade unless specified with a certificate
• A2 and A4 may be replaced with 304 and 316 respectively
• M used in Australia on non-stainless product to indicate metric is not consistently used on stainless
• If a stainless steel bolt is reworked so that the thread is machined and not rolled, the strength grading on the head must be disregarded
Grade Property Tensile Yield Elongation
Class Strength Stress Rm. MPa (N/mm2) min Rp. MPa (N/mm2) min A1 Min
A2 & A4 50 500 210 0.6d A2 & A4 70 700 450 0.4d A2 & A4 80 800 600 0.3d
STA
INLE
SS S
TEEL
AUSTRALIA’S FASTENER SPECIALISTS
HUGE RANGE
manufacturer’s identification and the AISI steel grade (e.g. 304 or 316). A recent common practice is to use the UNS (Unified Numbering System) number instead of the AISI (e.g. S31600 or S30400).
Fasteners without Head Markings
Fasteners without head markings should not be immediately deemed unsuitable. Fasteners not marked or marked with only the stainless steel grade are assumed to correspond with the lowest stainless steel property class. For example, screws marked A2-70 have a tensile strength of 700 MPa. Unmarked screws or those marked A2 or A4 are assumed to be class A2-50 or or A4-50 having a tensile strength of 500 MPa.
Manufacturer Certificates
In some cases, standards may not require such stringent controls. In these situations the supplier may simply be asked to provide a manufacturer’s certificate with the goods to indicate their grade and authenticity. Generally, it is sufficient only to specify the grade of stainless steel, although for some critical applications a compliance certificate or letter of conformance is recommended.
Material Group Austenitic
Material Group Austenitic
Identification of Steel Grades A1 A2 A4
Property Class 50 70 80
Soft Cold HighhtgnertS dekroW
A4-70A = Ausenitic steel (300 series)1 = Free cutting stainless steel with lower
corrosion resistance2 = Cold formed steel containing chromium
and nickel (known as 304)4 = Cold formed stainless steel containing
mainly chromium, nickel and molybdenum (known as 316)
Indicates the strength (property class)50 = 1/10 of the tensile strength min 500 MPa
(approx 7200 psi)70 = 1/10 of the tensile strength min 700 MPa
(approx 101000 psi)80 = 1/10 of the tensile strengthn min 800 MPa
Applies for sizes up to M20 only(approx 116000 psi)
Fastener head markings allow a person to quickly identify who made the fastener, what grade it is and which property class it belongs to. Most fasteners available are branded with the manufacturer’s identification mark and steel grade. Metric and imperial sizes are made to different standards and identification marks for these fasteners, while sometimes similar, may not be the same.
Metric Head Markings
Metric fasteners are usually identified in accordance with ISO 3506. However, ISO 3506 is a European specification and should only be used as a guide, as it does not represent all stainless steel fasteners. Under ISO 3506 hexagon bolts, set screws and hexagon socket head cap screws of size M5 and greater shall be marked with the steel grade, property class and manufacturer’s identification. Hexagon nuts of size M5 or greater shall be marked with the steel grade, property class (if necessary) and with the manufacturer’s identification where possible.
Imperial Head Markings
Most imperial fasteners are made for the large American market and carry the
Coventry Fasteners would like to acknowledge the Australian Stainless Steel Development Association (ASSDA) for permission to reproduce material from its 2008 Australian Stainless Reference Manual.
ASSDA is a non-profit industry group that aims to increase the consumption of stainless steel in Australia. Established in 1992, ASSDA represents up to 200 member companies including overseas mills, stockists and distributors, fabricators, engineering consultants, end users and service providers.
ASSDA's activities support the stainless steel industry by focusing on education and training, problem solving, networking, lobbying, promotion and accreditation. For further information visit www.assda.asn.au
Understanding stainless steel fastener markings
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
13STA
INLESS STEEL
AUSTRALIA’S FASTENER SPECIALISTS
HUGE RANGEWhen the chromium content is high (18 to 26%) and the nickel content is low (4 to 7%), the resulting structure is called duplex. In addition most duplex grades contain 2 to 3% molybdenum. Combining many of the beneficial properties of both ferritic and austenitic steels, 2205 is the most widely used duplex stainless steel grade.
You are most likely to encounter 2205 stainless steel being used in industrial environments such as petrochemical, chemical, oil, gas and paper plants but it may also be an appropriate choice for severe marine applications and other high chloride environments.
The duplex structure of 2205 has the following properties:• High strength; a yield strength of about
double that of 316• Lower thermal expansion coefficient
than of austenitic steels but greater than carbon steels and ferritic stainless steels
• High resistance to corrosion, particularly stress corrosion cracking, corrosion fatigue and erosion
The high content of chromium and molybdenum and the addition of nitrogen give the steel further beneficial characteristics:• High general corrosion resistance• High pitting and crevice corrosion
resistance• Good sulphide stress corrosion cracking
resistance
High mechanical strength combined with excellent corrosion resistance gives 2205 high corrosion-fatigue resistance – twice that of grade 316.
Grade 2205 is also less sensitive to stress corrosion cracking in warm chloride environments, compared to standard austenitic stainless steels. The grade also has good resistance to stress corrosion cracking when exposed to hydrogen sulphide in chloride solutions. The grade however is generally not suitable for use at temperatures above 300˚C or below -50˚C because of reduced toughness outside this range.
MECHANICAL PROPERTIES OF GRADE2205 (ANNEALED CONDITIONS)
Tensile strength 620MPa min
655MPa min
Yield strength 450MPa min
Elongation 25% min
Brinell hardness 293HB max
Rockwell hardness 31HRC max
Note: Apart from tensile strength, specified mechanical properties of S31803 and S32205 are identical. These properties are specified in ASTM A240M for plate, sheet and coil; slightly different properties may apply to other products.
PHYSICAL PROPERTIES OF GRADE2205 (TYPICAL VALUES INANNEALED CONDITION)
Density 7,800kg/m3
Elastic modulus 200GPa
Mean coefficient of thermal expansion
0-100°C 13.7 m/m/°C
0-315°C 14.7 m/m/°C
Thermal conductivity
at 100°C 19W/m.K
Specific heat 0-100°C 450J/kg.K
Electrical resistivity 20°C 850nOhm.m
Note: Physical properties of S31803 and S32205 are identical.
It is important that an appropriate grade of stainless steel is specified for your particular application.For further information, contact your local Coventry Fasteners branch (see back of catalogue for your nearest branch).
Grade 2205 (S31803) – for corrosion resistance and high strength
Reference: Australian Stainless Reference Manual 2008.
Need high strength
super duplex?
- SAF 2507® (S32750)
- ZERON® 100 (S32760)
Coventry Fasteners can also source super duplex stainless steel fasteners for your project needs. Super duplex can offer even higher strength than Grade 2205 with extremely high resistance to corrosion in severe marine, chloride and acid environments.
Coventry Fasteners has supplied super duplex fasteners to many desalination plants and offshore oil and gas platforms across Australia. For more information, contact your local Coventry Fasteners representative or branch.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
14ST
AIN
LESS
STE
ELAUSTRALIA’S FASTENER SPECIALISTS
BEST VALUEhas been used to provide protection from such corrosion issues.
The addition of a lubricant can have a significant effect on the torque-tension relationship. A lubricated fastener requires less torque to achieve the same level of tension and also makes the torque-tension relationship more predictable.
Different lubricants can also have different effects. The graph below shows the effect on the torque-tension relationship of adding a lubricant.
Reference: Australian Stainless Reference Manual 2008.
Hardness difference
Another important way of reducing galling is to use stainless steels for the two mating surfaces that have a significant hardness difference.
A minimum Brinell hardness difference of 50 is a rule-of-thumb. Stainless steel grade 316 (or 304) with stainless steel duplex 2205 or a martensitic 431 is often used.
Typical Brinell hardnesses of these combinations are: 316L–217, 2205–293, 431–277. A common belief that the use of grade 316 studs with grade 304 nuts (or vice versa) will avoid galling is a myth (there is no notable difference in galling).
In the water industries a combination of 316 bolts with aluminium bronze nuts is often used. However, aluminium bronze nuts are anodic to stainless steel and therefore need to be replaced occasionally.
A variety of proprietary high strength 200-series Mn and Silicon-containing stainless steels is available, such as Armco Nitronic 60 and Carpenter Gall-Tough.
Non-galling Nickel-base Alloys
Galling can also be reduced by the use of non-galling nickel base alloys for one of the mating surfaces.
Stainless steels have a tendency to gall, pick-up or seize. Galling occurs when the stainless steel oxide surface film breaks down as a result of direct metal contact.
Solid-phase welding can then take place (whereby material is transferred from one surface to another). The symptoms of galling include surface damage and seizing and freezing up of equipment.
Galling commonly occurs when using stainless steel nuts and bolts together, where the contact points are subjected to high tightening torques.
Fasteners made in accordance with internationally recognised standards should ensure the uniformity of threaded products. Reasonable care should be taken when handling stainless steel fasteners to avoid any thread damage and keep the threads clean and free from dirt, coarse grime or sand. If the threads are tightened on sand or dirt the possibility of galling or seizing is increased.
Guidelines to reduce galling
The following recommendations to reduce galling are based on the use of mating stainless steel surfaces, such as fasteners.
Use rolled threads
Rolled threads are less susceptible to galling than machined threads, have a smoother surface and the metal flow lines follow the thread profile:
• If threads are machined, carefully deburr before fitting.
• Inspect with a low powered x5 or x10 lens to check for burrs and surface roughness.
Electropolishing can be a convenient way of removing burrs and smoothing threads.
Consider Tightening Torque
Overtightening of stainless steel fasteners will promote galling. Use a torque wrench and the correct torque.The table on this page shows suggested maximum torque values for various diameters of stainless steel fasteners. This table is a guide only based on industry tests that provide maximum clamping value with minimum risk of seizing. The values shown are based on fasteners that are dry — free of any lubricants — and wiped clean of any foreign matter.
Recommended torques are also published in Nickel Institute Publication 9 003,
Stainless Steel Fasteners — A systematic approach to their selection.
TORQUE GUIDE (Nm)
Bolt Size Grade 304 Grade 316
(A2) (A4)
¹⁄₄ - 20 8.5 9¹⁄₄ - 28 11 11⁵⁄₁₆ - 18 15 16⁵⁄₁₆ - 24 16 17³⁄₈ - 16 27 28³⁄₈ - 24 29 31⁷⁄₁₆ - 14 42 44⁷⁄₁₆ - 20 45 47¹⁄₂ - 13 58 61¹⁄₂ - 20 61 64⁹⁄₁₆ - 12 77 81⁹⁄₁₆ - 18 85 89⁵⁄₈ - 11 125 131⁵⁄₈ - 18 141 147³⁄₄ - 10 173 179³⁄₄ - 16 168 176⁷⁄₈ - 9 263 275⁷⁄₈ - 14 262 2731 - 8 389 4061 - 14 351 3671 ¹⁄₈ - 7 560 5861 ¹⁄₈ - 12 529 5531 ¹⁄₄ - 7 709 7401 ¹⁄₄ - 12 651 6831 ¹⁄₂ - 6 1204 12611 ¹⁄₂ - 12 953 993
Suggested Max Torquing Values – a guidebased upon industry tests on dry products
wiped clean. The ³⁄₈ diameter and undermetal products were roll-threaded and,where size range permitted, were made on
Bolt Maker equipment. Source: ITT Harper.
Reference: Australian Stainless Reference Manual 2008.
Lubrication
It is recommended that some form of lubrication be applied to threads prior to assembly. The tendency for galling can be reduced by the use of proprietary grease-type lubricants.
Some commonly used lubricants contain molybdenum disulphide, nickel powder or graphite. Galvanic corrosion can be an issue when using lubricants as graphite is cathodic to stainless steel and other metals. As greases dry out, crevices can form on the stainless steel fasteners and promote crevice corrosion. Nickel plating of threads
Galling/Pick-up/Seizing
WE ALSO SUPPLY INDUSTRIAL, CONSTRUCTION AND SPECIALISED FASTENERS AS WELL AS ASSOCIATED TOOLS AND CONSUMABLES.Call your nearest branch now for a catalogue.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
15STA
INLESS STEEL
AUSTRALIA’S FASTENER SPECIALISTS
BEST VALUE
What causes tea staining?
The relationships between the contributing factors are complex, but generally become increasingly critical closer to marine water. Corrosion occurs because the local conditions are too aggressive for that grade in its installed condition. There are six important factors:
1. Presence of corrosives - especially salt
2. Cleanliness or passivity of the surface
3. Surface roughness - rougher is worse
4. Surface orientation and design - poor drainage which may trap and concentrate corrosives
5. Atmospheric conditions - high temperature and relative humidity
6. Maintenance - or deposits will accumulate
Stainless Steel Tea Staining
Successful use of stainless steel, after more than 10 years service in a coastal environment. Reference: Australian Stainless Reference Manual 2008.
When used properly, stainless steel is an attractive product that provides sound structural integrity in a wide range of applications and environments. However, incorrect specification, fabrication or subsequent handling in coastal environments may cause stainless steel to stain or discolour, impairing the overall look. This brown discolouration, known as tea staining, has been identified in coastal applications in Australia and overseas.
Tea staining mostly occurs within about five kilometres of the beachfront, or a few hundred metres from a sheltered bay and worsens closer to the marine source. Other environmental factors may contribute to the problem such as wind exposure, industrial pollution and elevated temperatures where tea staining may occur up to 20 kilometres from the sea. Tea staining can be controlled and it does not affect the structural integrity or the longevity of the material.
This image illustrates typical examples of stainless steel tea staining on hand rails.
For a more detailed look at tea staining, download a copy of the “Tea Staining Technical Bulletin” at www.assda.asn.au - click on “Technical Information” followed by “Technical Alerts”.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
16 AUSTRALIA’S FASTENER SPECIALISTS
BRANCHES AUSTRALIA WIDE
WANT TO KNOW MORE?Contact your local Coventry Fasteners branch for more information on this product (see back of catalogue for your nearest branch).
James Glen has established itself as the market leader of stainless steel fasteners in Australia and New Zealand. Which is why James Glen is the stainless steel fastener we recommend to our customers. Every product is manufactured to the same high standard of quality you would expect from this well known brand. For more information about James Glen, including product training and technical manuals, visit www.jamesglen.com.au. Supplying the products you know and trust - just another way we’re making your job easier.
Since 1964, James Glen has been the one stainless steel fastener brand Australian industry can rely on.
WHY WE STOCK IT
BO
LTS
17
HEXAGON HEAD BOLTS/HEXAGON HEAD SET SCREWS/CUP HEAD BOLTSHEXAGON HEAD COACH SCREWS/HEXAGON HEAD BOLTS/HEXAGON HEASET SCREWS/CUP HEAD BOLTS/HEXAGON HEAD COACH SCREWS/HEXAGOHEAD BOLTS/HEXAGON HEAD SET SCREWS/CUP HEAD BOLTS/HEXAGON HEACOACH SCREWS/HEXAGON HEAD BOLTS/HEXAGON HEAD SET SCREWS/CUHEAD BOLTS/HEXAGON HEAD COACH SCREWS/HEXAGON HEAD BOLTSHEXAGON HEAD SET SCREWS/CUP HEAD BOLTS/HEXAGON HEAD COACSCREWS/HEXAGON HEAD BOLTS/HEXAGON HEAD SET SCREWS/CUP HEABOLTS/HEXAGON HEAD COACH SCREWS/HEXAGON HEAD BOLTS/HEXAGOBOLTS
BO
LTS
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
18 AUSTRALIA’S FASTENER SPECIALISTS
SPECIALIST ADVICE
Contact your local Coventry Fasteners branch for more information on this product (see back of catalogue for your nearest branch).
James Glen is Australia’s biggest stainless steel fastener company with over 5,000 products to suit just about every fixing application. Which is why James Glen is the stainless steel fastener we recommend to our customers. Coventry Fasteners is the largest retailer of James Glen stainless steel fasteners in the country and the entire James Glen range is available through our national network of stores. For more information about James Glen, including product training and technical manuals, visit www.jamesglen.com.au. Giving you a bigger choice – just another way we’re making your job easier.
A bigger range, better choice, great value.
WHY WE STOCK IT
WANT TO KNOW MORE?
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
BO
LTS19AUSTRALIA’S FASTENER SPECIALISTS
SPECIALIST ADVICEGRADE 304 METRIC HEXAGON HEAD BOLTS continued…
Dia. Length Pack Part No. mm mm qty
10 130 25 10X130MG304B 10 140 25 10X140MG304B 10 150 25 10X150MG304B 12 40 50 12X40MG304B 12 45 50 12X45MG304B 12 50 25 12X50MG304B 12 55 25 12X55MG304B 12 60 25 12X60MG304B 12 65 25 12X65MG304B 12 70 25 12X70MG304B 12 75 25 12X75MG304B 12 80 25 12X80MG304B 12 90 25 12X90MG304B 12 100 25 12X100MG304B 12 110 25 12X110MG304B 12 120 25 12X120MG304B 12 130 25 12X130MG304B 12 140 25 12X140MG304B 12 150 25 12X150MG304B 12 160 25 12X160MG304B 16 50 25 16X50MG304B 16 55 25 16X55MG304B 16 60 25 16X60MG304B 16 65 25 16X65MG304B 16 70 25 16X70MG304B 16 75 25 16X75MG304B 16 80 25 16X80MG304B 16 90 25 16X90MG304B 16 100 25 16X100MG304B 16 110 25 16X110MG304B 16 120 25 16X120MG304B 16 130 20 16X130MG304B 16 140 20 16X140MG304B 16 150 20 16X150MG304B 16 160 20 16X160MG304B 16 200 10 16X200MG304B 20 60 25 20X60MG304B 20 65 25 20X65MG304B 20 70 25 20X70MG304B 20 75 20 20X75MG304B 20 80 20 20X80MG304B 20 90 10 20X90MG304B 20 100 10 20X100MG304B 20 120 10 20X120MG304B 20 130 10 20X130MG304B 20 140 10 20X140MG304B 20 150 10 20X150MG304B 24 80 10 24X80MG304B
continued…
Hexagon Head Bolts
GRADE 304 METRIC HEXAGON HEAD BOLTS
Dia. Length Pack Part No. mm mm qty
6 30 100 6X30MG304B 6 35 100 6X35MG304B 6 40 100 6X40MG304B 6 45 100 6X45MG304B 6 50 100 6X50MG304B 6 55 50 6X55MG304B 6 60 50 6X60MG304B 6 65 50 6X65MG304B 6 70 50 6X70MG304B 6 75 50 6X75MG304B 6 80 50 6X80MG304B 6 90 50 6X90MG304B 6 100 50 6X100MG304B 6 130 25 6X130MG304B 6 150 25 6X150MG304B 8 30 100 8X30MG304B 8 35 100 8X35MG304B 8 40 100 8X40MG304B 8 45 100 8X45MG304B 8 50 100 8X50MG304B 8 55 50 8X55MG304B 8 60 50 8X60MG304B 8 65 50 8X65MG304B 8 70 50 8X70MG304B 8 75 50 8X75MG304B 8 80 50 8X80MG304B 8 90 50 8X90MG304B 8 100 50 8X100MG304B 8 110 25 8X110MG304B 8 130 25 8X130MG304B 8 150 25 8X150MG304B 10 35 100 10X35MG304B 10 40 100 10X40MG304B 10 45 100 10X45MG304B 10 50 100 10X50MG304B 10 55 50 10X55MG304B 10 60 50 10X60MG304B 10 65 50 10X65MG304B 10 70 50 10X70MG304B 10 75 50 10X75MG304B 10 80 50 10X80MG304B 10 90 50 10X90MG304B 10 100 50 10X100MG304B 10 110 25 10X110MG304B 10 120 25 10X120MG304B
continued…
CAN’T FIND IT?Can’t find what you’re looking for? The friendly team at your local Coventry Fasteners branch can help. Personal service is another way we’re making your job easier.Turn to back cover for your nearest branch.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
20B
OLT
SAUSTRALIA’S FASTENER SPECIALISTS
FAST DELIVERYGRADE 316 METRIC HEXAGON HEAD BOLTS continued…
Dia. Length Pack Part No. mm mm qty
10 65 50 10X65MG316B 10 70 50 10X70MG316B 10 75 50 10X75MG316B 10 80 50 10X80MG316B 10 90 50 10X90MG316B 10 100 50 10X100MG316B 10 110 25 10X110MG316B 10 120 25 10X120MG316B 10 130 25 10X130MG316B 10 140 25 10X140MG316B 10 150 25 10X150MG316B 10 160 25 10X160MG316B 10 170 25 10X170MG316B 10 180 25 10X180MG316B 10 200 25 10X200MG316B 10 220 10 10X220MG316B 10 240 10 10X240MG316B 12 40 50 12X40MG316B 12 45 50 12X45MG316B 12 50 25 12X50MG316B 12 55 25 12X55MG316B 12 60 25 12X60MG316B 12 65 25 12X65MG316B 12 70 25 12X70MG316B 12 75 25 12X75MG316B 12 80 25 12X80MG316B 12 90 25 12X90MG316B 12 100 25 12X100MG316B 12 110 25 12X110MG316B 12 120 25 12X120MG316B 12 130 25 12X130MG316B 12 140 25 12X140MG316B 12 150 25 12X150MG316B 12 160 25 12X160MG316B 12 170 25 12X170MG316B 12 180 25 12X180MG316B 12 190 25 12X190MG316B 12 200 25 12X200MG316B 12 210 10 12X210MG316B 12 220 10 12X220MG316B 12 240 10 12X240MG316B 12 250 10 12X250MG316B 12 260 10 12X260MG316B 12 280 10 12X280MG316B 12 300 10 12X300MG316B 14 50 25 14X50MG316B 14 60 25 14X60MG316B 14 70 25 14X70MG316B 14 75 25 14X75MG316B 14 80 25 14X80MG316B 14 90 25 14X90MG316B 14 100 25 14X100MG316B 14 120 25 14X120MG316B 14 140 25 14X140MG316B 16 50 25 16X50MG316B 16 55 25 16X55MG316B
continued…
GRADE 304 METRIC HEXAGON HEAD BOLTS continued…
Dia. Length Pack Part No. mm mm qty
24 90 10 24X90MG304B 24 100 10 24X100MG304B 24 110 10 24X110MG304B 24 120 10 24X120MG304B 24 130 10 24X130MG304B 24 140 10 24X140MG304B 24 150 10 24X150MG304B
GRADE 316 METRIC HEXAGON HEAD BOLTS
Dia. Length Pack Part No. mm mm qty
6 30 100 6X30MG316B 6 35 100 6X35MG316B 6 40 100 6X40MG316B 6 45 100 6X45MG316B 6 50 100 6X50MG316B 6 55 50 6X55MG316B 6 60 50 6X60MG316B 6 65 50 6X65MG316B 6 70 50 6X70MG316B 6 75 50 6X75MG316B 6 80 50 6X80MG316B 6 90 50 6X90MG316B 6 100 50 6X100MG316B 6 110 25 6X110MG316B 6 130 25 6X130MG316B 6 150 25 6X150MG316B 8 35 100 8X35MG316B 8 40 100 8X40MG316B 8 45 100 8X45MG316B 8 50 100 8X50MG316B 8 55 50 8X55MG316B 8 60 50 8X60MG316B 8 65 50 8X65MG316B 8 70 50 8X70MG316B 8 75 50 8X75MG316B 8 80 50 8X80MG316B 8 90 50 8X90MG316B 8 100 50 8X100MG316B 8 120 25 8X120MG316B 8 130 25 8X130MG316B 8 150 25 8X150MG316B 10 40 100 10X40MG316B 10 45 100 10X45MG316B 10 50 100 10X50MG316B 10 55 50 10X55MG316B 10 60 50 10X60MG316B
continued…
DOES IT FIT?Choosing the correct fastener for the job is essential. If you’re not sure of the grade, protective coating, head type or thread for the job ask us. Specialist advice is another way we’re making your job easier. Turn to back cover for your nearest branch.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
BO
LTS21AUSTRALIA’S FASTENER SPECIALISTS
FAST DELIVERYGRADE 316 METRIC HEXAGON HEAD BOLTS continued…
Dia. Length Pack Part No. mm mm qty
16 60 25 16X60MG316B 16 65 25 16X65MG316B 16 70 25 16X70MG316B 16 75 25 16X75MG316B 16 80 25 16X80MG316B 16 90 25 16X90MG316B 16 100 25 16X100MG316B 16 110 25 16X110MG316B 16 120 25 16X120MG316B 16 130 20 16X130MG316B 16 140 20 16X140MG316B 16 150 20 16X150MG316B 16 160 20 16X160MG316B 16 180 10 16X180MG316B 16 200 10 16X200MG316B 16 220 10 16X220MG316B 16 240 10 16X240MG316B 16 300 10 16X300MG316B 18 60 25 18X60MG316B 18 80 25 18X80MG316B 20 60 25 20X60MG316B 20 65 25 20X65MG316B 20 70 25 20X70MG316B 20 75 20 20X75MG316B 20 80 20 20X80MG316B 20 90 10 20X90MG316B 20 100 10 20X100MG316B 20 110 10 20X110MG316B 20 120 10 20X120MG316B 20 130 10 20X130MG316B 20 140 10 20X140MG316B 20 150 10 20X150MG316B 20 160 10 20X160MG316B 20 180 10 20X180MG316B 20 200 10 20X200MG316B 20 240 10 20X240MG316B 20 250 10 20X250MG316B 20 260 10 20X260MG316B 20 300 10 20X300MG316B 22 90 10 22X90MG316B 22 100 10 22X100MG316B 22 120 10 22X120MG316B 24 70 10 24X70MG316B 24 75 10 24X75MG316B 24 80 10 24X80MG316B 24 90 10 24X90MG316B 24 100 10 24X100MG316B 24 110 10 24X110MG316B 24 120 10 24X120MG316B 24 130 10 24X130MG316B 24 140 10 24X140MG316B 24 150 10 24X150MG316B 24 160 10 24X160MG316B 24 180 10 24X180MG316B 24 190 10 24X190MG316B 24 200 10 24X200MG316B
continued…
GRADE 316 METRIC HEXAGON HEAD BOLTS continued…
Dia. Length Pack Part No. mm mm qty
24 250 10 24X250MG316B 27 100 5 27X100MG316B 27 120 5 27X120MG316B 27 130 5 27X130MG316B 27 140 5 27X140MG316B 27 160 5 27X160MG316B 30 90 5 30X90MG316B 30 100 5 30X100MG316B 30 130 5 30X130MG316B 30 140 5 30X140MG316B 30 150 5 30X150MG316B 30 160 5 30X160MG316B 30 180 5 30X180MG316B 36 120 2 36X120MG316B 36 130 2 36X130MG316B 36 140 2 36X140MG316B 36 150 2 36X150MG316B 36 180 2 36X180MG316B 36 200 2 36X200MG316B 36 250 2 36X250MG316B
GRADE 304 BSW HEXAGON HEAD BOLTS
Dia. Length Pack Part No. inch inch qty
¹⁄₂ 1 ¹⁄₂ 50 12X1.12BWG304B ¹⁄₂ 1 ³⁄₄ 50 12X1.34BWG304B ¹⁄₂ 2 50 12X2BWG304B ¹⁄₂ 2 ¹⁄₄ 25 12X2.14BWG304B ¹⁄₂ 2 ³⁄₄ 25 12X2.34BWG304B ¹⁄₂ 3 25 12X3BWG304B ¹⁄₂ 3 ¹⁄₂ 25 12X3.12BWG304B ¹⁄₂ 4 25 12X4BWG304B
GRADE 316 BSW HEXAGON HEAD BOLTS
Dia. Length Pack Part No. inc h inch qty
¹⁄₂ 1 ¹⁄₂ 50 12X1.12BWG316B ¹⁄₂ 1 ³⁄₄ 50 12X1.34BWG316B ¹⁄₂ 2 50 12X2BWG316B ¹⁄₂ 2 ¹⁄₂ 25 12X2.12BWG316B ¹⁄₂ 2 ³⁄₄ 25 12X2.34BWG316B ¹⁄₂ 3 25 12X3BWG316B ¹⁄₂ 3 ¹⁄₂ 25 12X3.12BWG316B ¹⁄₂ 4 25 12X4BWG316B ¹⁄₂ 4 ¹⁄₂ 25 12X4.12BWG316B ¹⁄₂ 5 25 12X5BWG316B
ONLINE CATALOGUEVisit www.coventryfasteners.com.au to view current list prices for all products in our Stainless Steel, Industrial and Construction Fasteners catalogues. Current list prices at the click of a button – it’s just another way we’re making your job easier.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
BO
LTS
22 AUSTRALIA’S FASTENER SPECIALISTS
FRIENDLY SERVICEGRADE 304 UNC HEXAGON HEAD BOLTS
Dia. Length Pack Part No. inch inch qty
¹⁄₄ 1 ¹⁄₄ 100 14X1.14NCG304B ¹⁄₄ 1 ¹⁄₂ 100 14X1.12NCG304B ¹⁄₄ 1 ³⁄₄ 100 14X1.34NCG304B ¹⁄₄ 2 100 14X2NCG304B ¹⁄₄ 2 ¹⁄₄ 50 14X2.14NCG304B ¹⁄₄ 2 ¹⁄₂ 50 14X2.12NCG304B ¹⁄₄ 2 ³⁄₄ 50 14X2.34NCG304B ¹⁄₄ 3 50 14X3NCG304B ¹⁄₄ 3 ¹⁄₂ 50 14X3.12NCG304B ¹⁄₄ 4 50 14X4NCG304B ¹⁄₄ 4 ¹⁄₂ 25 14X4.12NCG304B ¹⁄₄ 5 25 14X5NCG304B ¹⁄₄ 5 ¹⁄₂ 25 14X5.12NCG304B ¹⁄₄ 6 25 14X6NCG304B ⁵⁄₁₆ 1 ¹⁄₂ 100 516X1.12NCG304B ⁵⁄₁₆ 1 ³⁄₄ 100 516X1.34NCG304B ⁵⁄₁₆ 2 100 516X2NCG304B ⁵⁄₁₆ 2 ¹⁄₄ 50 516X2.14NCG304B ⁵⁄₁₆ 2 ¹⁄₂ 50 516X2.12NCG304B ⁵⁄₁₆ 2 ³⁄₄ 50 516X2.34NCG304B ⁵⁄₁₆ 3 50 516X3NCG304B ⁵⁄₁₆ 3 ¹⁄₂ 50 516X3.12NCG304B ⁵⁄₁₆ 4 50 516X4NCG304B ⁵⁄₁₆ 4 ¹⁄₂ 25 516X4.12NCG304B ⁵⁄₁₆ 5 25 516X5NCG304B ⁵⁄₁₆ 5 ¹⁄₂ 25 516X5.12NCG304B ⁵⁄₁₆ 6 25 516X6NCG304B ³⁄₈ 1 ¹⁄₂ 100 38X1.12NCG304B ³⁄₈ 1 ³⁄₄ 100 38X1.34NCG304B ³⁄₈ 2 100 38X2NCG304B ³⁄₈ 2 ¹⁄₄ 50 38X2.14NCG304B ³⁄₈ 2 ¹⁄₂ 50 38X2.12NCG304B ³⁄₈ 2 ³⁄₄ 50 38X2.34NCG304B ³⁄₈ 3 50 38X3NCG304B ³⁄₈ 3 ¹⁄₂ 50 38X3.12NCG304B ³⁄₈ 4 50 38X4NCG304B ³⁄₈ 4 ¹⁄₂ 25 38X4.12NCG304B ³⁄₈ 5 25 38X5NCG304B ³⁄₈ 5 ¹⁄₂ 25 38X5.12NCG304B ³⁄₈ 6 25 38X6NCG304B ³⁄₈ 6 ¹⁄₂ 25 38X6.12NCG304B ³⁄₈ 8 25 38X8NCG304B ¹⁄₂ 1 ³⁄₄ 50 12X1.34NCG304B ¹⁄₂ 2 50 12X2NCG304B ¹⁄₂ 2 ¹⁄₂ 25 12X2.12NCG304B ¹⁄₂ 3 25 12X3NCG304B ¹⁄₂ 3 ¹⁄₂ 25 12X3.12NCG304B ¹⁄₂ 4 25 12X4NCG304B
continued…
GRADE 304 UNC HEXAGON HEAD BOLTS continued…
Dia. Length Pack Part No. inch inch qty
¹⁄₂ 4 ¹⁄₂ 25 12X4.12NCG304B ¹⁄₂ 5 25 12X5NCG304B ¹⁄₂ 6 25 12X6NCG304B ⁵⁄₈ 2 25 58X2NCG304B ⁵⁄₈ 2 ¹⁄₄ 25 58X2.14NCG304B ⁵⁄₈ 2 ¹⁄₂ 25 58X2.12NCG304B ⁵⁄₈ 2 ³⁄₄ 25 58X2.34NCG304B ⁵⁄₈ 3 25 58X3NCG304B ⁵⁄₈ 3 ¹⁄₂ 25 58X3.12NCG304B ⁵⁄₈ 4 25 58X4NCG304B ⁵⁄₈ 4 ¹⁄₂ 25 58X4.12NCG304B ⁵⁄₈ 5 20 58X5NCG304B ⁵⁄₈ 5 ¹⁄₂ 20 58X5.12NCG304B ⁵⁄₈ 6 20 58X6NCG304B ³⁄₄ 2 ¹⁄₂ 25 34X2.12NCG304B ³⁄₄ 2 ³⁄₄ 25 34X2.34NCG304B ³⁄₄ 3 20 34X3NCG304B ³⁄₄ 3 ¹⁄₂ 10 34X3.12NCG304B ³⁄₄ 4 10 34X4NCG304B ³⁄₄ 4 ¹⁄₂ 10 34X4.12NCG304B ³⁄₄ 5 10 34X5NCG304B ³⁄₄ 5 ¹⁄₂ 10 34X5.12NCG304B ³⁄₄ 6 10 34X6NCG304B ³⁄₄ 7 10 34X7NCG304B
GRADE 316 UNC HEXAGON HEAD BOLTS
Dia. Length Pack Part No. inch inch qty
¹⁄₄ 1 ¹⁄₄ 100 14X1.14NCG316B ¹⁄₄ 1 ¹⁄₂ 100 14X1.12NCG316B ¹⁄₄ 1 ³⁄₄ 100 14X1.34NCG316B ¹⁄₄ 2 100 14X2NCG316B ¹⁄₄ 2 ¹⁄₄ 50 14X2.14NCG316B ¹⁄₄ 2 ¹⁄₂ 50 14X2.12NCG316B ¹⁄₄ 3 50 14X3NCG316B ¹⁄₄ 3 ¹⁄₂ 50 14X3.12NCG316B ¹⁄₄ 4 50 14X4NCG316B ¹⁄₄ 4 ¹⁄₂ 25 14X4.12NCG316B ¹⁄₄ 5 25 14X5NCG316B ¹⁄₄ 6 25 14X6NCG316B ⁵⁄₁₆ 1 ¹⁄₂ 100 516X1.12NCG316B ⁵⁄₁₆ 1 ³⁄₄ 100 516X1.34NCG316B ⁵⁄₁₆ 2 100 516X2NCG316B ⁵⁄₁₆ 2 ¹⁄₄ 50 516X2.14NCG316B ⁵⁄₁₆ 2 ¹⁄₂ 50 516X2.12NCG316B ⁵⁄₁₆ 2 ³⁄₄ 50 516X2.34NCG316B ⁵⁄₁₆ 3 50 516X3NCG316B ⁵⁄₁₆ 3 ¹⁄₂ 50 516X3.12NCG316B ⁵⁄₁₆ 4 50 516X4NCG316B ⁵⁄₁₆ 4 ¹⁄₂ 25 516X4.12NCG316B ⁵⁄₁₆ 5 25 516X5NCG316B ⁵⁄₁₆ 5 ¹⁄₂ 25 516X5.12NCG316B ⁵⁄₁₆ 6 25 516X6NCG316B ³⁄₈ 1 ¹⁄₂ 100 38X1.12NCG316B ³⁄₈ 1 ³⁄₄ 100 38X1.34NCG316B
continued…
FASTER ORDERINGDon’t forget to quote the part number when ordering. Quick and efficient ordering is another way we’re making your job easier.Turn to back cover for your nearest branch.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
BO
LTS23AUSTRALIA’S FASTENER SPECIALISTS
FRIENDLY SERVICEGRADE 316 UNC HEXAGON HEAD BOLTS continued…
Dia. Length Pack Part No. inch inch qty
³⁄₈ 2 100 38X2NCG316B ³⁄₈ 2 ¹⁄₄ 50 38X2.14NCG316B ³⁄₈ 2 ¹⁄₂ 50 38X2.12NCG316B ³⁄₈ 2 ³⁄₄ 50 38X2.34NCG316B ³⁄₈ 3 50 38X3NCG316B ³⁄₈ 3 ¹⁄₂ 50 38X3.12NCG316B ³⁄₈ 4 50 38X4NCG316B ³⁄₈ 4 ¹⁄₂ 25 38X4.12NCG316B ³⁄₈ 5 25 38X5NCG316B ³⁄₈ 5 ¹⁄₂ 25 38X5.12NCG316B ³⁄₈ 6 25 38X6NCG316B ³⁄₈ 7 25 38X7NCG316B ³⁄₈ 8 25 38X8NCG316B ⁷⁄₁₆ 1 ³⁄₄ 50 716X1.34NCG316B ⁷⁄₁₆ 2 50 716X2NCG316B ⁷⁄₁₆ 2 ¹⁄₂ 25 716X2.12NCG316B ⁷⁄₁₆ 3 25 716X3NCG316B ¹⁄₂ 1 ³⁄₄ 50 12X1.34NCG316B ¹⁄₂ 2 50 12X2NCG316B ¹⁄₂ 2 ¹⁄₄ 25 12X2.14NCG316B ¹⁄₂ 2 ¹⁄₂ 25 12X2.12NCG316B ¹⁄₂ 2 ³⁄₄ 25 12X2.34NCG316B ¹⁄₂ 3 25 12X3NCG316B ¹⁄₂ 3 ¹⁄₂ 25 12X3.12NCG316B ¹⁄₂ 4 25 12X4NCG316B ¹⁄₂ 4 ¹⁄₂ 25 12X4.12NCG316B ¹⁄₂ 5 25 12X5NCG316B ¹⁄₂ 5 ¹⁄₂ 25 12X5.12NCG316B ¹⁄₂ 6 25 12X6NCG316B ¹⁄₂ 6 ¹⁄₂ 25 12X6.12NCG316B ¹⁄₂ 7 25 12X7NCG316B ¹⁄₂ 7 ¹⁄₂ 25 12X7.12NCG316B ¹⁄₂ 8 25 12X8NCG316B ¹⁄₂ 8 ¹⁄₂ 10 12X8.12NCG316B ⁵⁄₈ 2 25 58X2NCG316B ⁵⁄₈ 2 ¹⁄₄ 25 58X2.14NCG316B ⁵⁄₈ 2 ¹⁄₂ 25 58X2.12NCG316B ⁵⁄₈ 2 ³⁄₄ 25 58X2.34NCG316B ⁵⁄₈ 3 25 58X3NCG316B ⁵⁄₈ 3 ¹⁄₂ 25 58X3.12NCG316B ⁵⁄₈ 4 25 58X4NCG316B ⁵⁄₈ 4 ¹⁄₂ 25 58X4.12NCG316B ⁵⁄₈ 5 20 58X5NCG316B ⁵⁄₈ 5 ¹⁄₂ 20 58X5.12NCG316B ⁵⁄₈ 6 20 58X6NCG316B ⁵⁄₈ 7 10 58X7NCG316B ⁵⁄₈ 8 10 58X8NCG316B ³⁄₄ 2 ¹⁄₂ 25 34X2.12NCG316B ³⁄₄ 2 ³⁄₄ 25 34X2.34NCG316B ³⁄₄ 3 20 34X3NCG316B ³⁄₄ 3 ¹⁄₂ 10 34X3.12NCG316B ³⁄₄ 4 10 34X4NCG316B ³⁄₄ 4 ¹⁄₂ 10 34X4.12NCG316B ³⁄₄ 5 10 34X5NCG316B ³⁄₄ 5 ¹⁄₂ 10 34X5.12NCG316B
continued…
GRADE 316 UNC HEXAGON HEAD BOLTS continued…
Dia. Length Pack Part No. inch inch qty
³⁄₄ 6 10 34X6NCG316B ³⁄₄ 7 10 34X7NCG316B ⁷⁄₈ 3 10 78X3NCG316B ⁷⁄₈ 3 ¹⁄₂ 10 78X3.12NCG316B ⁷⁄₈ 4 10 78X4NCG316B ⁷⁄₈ 4 ¹⁄₂ 10 78X4.12NCG316B ⁷⁄₈ 5 10 78X5NCG316B ⁷⁄₈ 6 10 78X6NCG316B 1 3 10 1X3NCG316B 1 3 ¹⁄₂ 10 1X3.12NCG316B 1 4 10 1X4NCG316B 1 4 ¹⁄₂ 10 1X4.12NCG316B 1 5 10 1X5NCG316B 1 6 10 1X6NCG316B
GRADE 304 UNF HEXAGON HEAD BOLTS
Dia. Length Part No. inch inch
¹⁄₄ 1 ¹⁄₄ 50 14X1.14NFG304B ¹⁄₄ 1 ¹⁄₂ 50 14X1.12NFG304B ¹⁄₄ 2 50 14X2NFG304B ¹⁄₄ 2 ¹⁄₂ 50 14X2.12NFG304B ¹⁄₄ 3 50 14X3NFG304B ⁵⁄₁₆ 1 ¹⁄₂ 50 516X1.12NFG304B ⁵⁄₁₆ 2 50 516X2NFG304B ⁵⁄₁₆ 2 ¹⁄₂ 50 516X2.12NFG304B ³⁄₈ 1 ¹⁄₂ 50 38X1.12NFG304B ³⁄₈ 1 ³⁄₄ 50 38X1.34NFG304B ³⁄₈ 2 50 38X2NFG304B ³⁄₈ 2 ¹⁄₂ 50 38X2.12NFG304B ³⁄₈ 3 50 38X3NFG304B ³⁄₈ 3 ¹⁄₂ 25 38X3.12NFG304B ⁷⁄₁₆ 2 50 716X2NFG304B ⁷⁄₁₆ 2 ¹⁄₂ 50 716X2.12NFG304B ⁷⁄₁₆ 3 50 716X3NFG304B ⁷⁄₁₆ 3 ¹⁄₂ 25 716X3.12NFG304B ¹⁄₂ 2 25 12X2NFG304B ¹⁄₂ 2 ¹⁄₂ 25 12X2.12NFG304B ¹⁄₂ 3 25 12X3NFG304B ¹⁄₂ 3 ¹⁄₂ 25 12X3.12NFG304B ¹⁄₂ 4 25 12X4NFG304B ¹⁄₂ 4 ¹⁄₂ 25 12X4.12NFG304B ⁵⁄₈ 3 25 58X3NFG304B
WE ALSO SUPPLY INDUSTRIAL, CONSTRUCTION AND SPECIALISED
FASTENERS AS WELL AS ASSOCIATED TOOLS AND CONSUMABLES.
Call your nearest branch now for a catalogue.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
BO
LTS
24 AUSTRALIA’S FASTENER SPECIALISTS
HUGE RANGEGRADE 304 METRIC HEXAGON HEAD SET SCREWS continued…
Dia. Length Pack Part No. mm mm qty
6 65 50 6X65MG304SS 6 70 50 6X70MG304SS 6 75 50 6X75MG304SS 6 80 50 6X80MG304SS 6 90 50 6X90MG304SS 6 100 50 6X100MG304SS 8 12 100 8X12MG304SS 8 16 100 8X16MG304SS 8 20 100 8X20MG304SS 8 25 100 8X25MG304SS 8 30 100 8X30MG304SS 8 35 100 8X35MG304SS 8 40 100 8X40MG304SS 8 45 100 8X45MG304SS 8 50 100 8X50MG304SS 8 55 50 8X55MG304SS 8 60 50 8X60MG304SS 8 65 50 8X65MG304SS 8 70 50 8X70MG304SS 8 75 50 8X75MG304SS 8 80 50 8X80MG304SS 8 90 50 8X90MG304SS 8 100 50 8X100MG304SS 10 12 100 10X12MG304SS 10 16 100 10X16MG304SS 10 20 100 10X20MG304SS 10 25 100 10X25MG304SS 10 30 100 10X30MG304SS 10 35 100 10X35MG304SS 10 40 100 10X40MG304SS 10 45 100 10X45MG304SS 10 50 100 10X50MG304SS 10 55 50 10X55MG304SS 10 60 50 10X60MG304SS 10 65 50 10X65MG304SS 10 70 50 10X70MG304SS 10 75 50 10X75MG304SS 10 80 50 10X80MG304SS 10 90 50 10X90MG304SS 10 100 50 10X100MG304SS 10 110 25 10X110MG304SS 12 20 100 12X20MG304SS 12 25 100 12X25MG304SS 12 30 100 12X30MG304SS 12 35 100 12X35MG304SS 12 40 50 12X40MG304SS 12 45 50 12X45MG304SS 12 50 50 12X50MG304SS 12 55 25 12X55MG304SS 12 60 25 12X60MG304SS 12 65 25 12X65MG304SS 12 70 25 12X70MG304SS 12 75 25 12X75MG304SS 12 80 25 12X80MG304SS 12 90 25 12X90MG304SS 12 100 25 12X100MG304SS
continued…
Hexagon Head Set Screws
GRADE 304 METRIC HEXAGON HEAD SET SCREWS
Dia. Length Pack Part No. mm mm qty
3 6 100 3X6MG304SS 3 8 100 3X8MG304SS 3 10 100 3X10MG304SS 3 12 100 3X12MG304SS 3 16 100 3X16MG304SS 3 20 100 3X20MG304SS 3 25 100 3X25MG304SS 3 30 100 3X30MG304SS 4 6 100 4X6MG304SS 4 8 100 4X8MG304SS 4 10 100 4X10MG304SS 4 12 100 4X12MG304SS 4 16 100 4X16MG304SS 4 20 100 4X20MG304SS 4 25 100 4X25MG304SS 4 30 100 4X30MG304SS 4 35 100 4X35MG304SS 4 40 100 4X40MG304SS 4 50 100 4X50MG304SS 5 8 100 5X8MG304SS 5 10 100 5X10MG304SS 5 12 100 5X12MG304SS 5 16 100 5X16MG304SS 5 20 100 5X20MG304SS 5 25 100 5X25MG304SS 5 30 100 5X30MG304SS 5 35 100 5X35MG304SS 5 40 100 5X40MG304SS 5 45 100 5X45MG304SS 5 50 100 5X50MG304SS 5 55 100 5X55MG304SS 6 8 100 6X8MG304SS 6 10 100 6X10MG304SS 6 12 100 6X12MG304SS 6 16 100 6X16MG304SS 6 20 100 6X20MG304SS 6 25 100 6X25MG304SS 6 30 100 6X30MG304SS 6 35 100 6X35MG304SS 6 40 100 6X40MG304SS 6 45 100 6X45MG304SS 6 50 100 6X50MG304SS 6 55 50 6X55MG304SS 6 60 50 6X60MG304SS
continued…
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
BO
LTS25AUSTRALIA’S FASTENER SPECIALISTS
HUGE RANGEGRADE 316 METRIC HEXAGON HEAD SET SCREWS continued…
Dia. Length Pack Part No. mm mm qty
4 25 100 4X25MG316SS 5 10 100 5X10MG316SS 5 12 100 5X12MG316SS 5 16 100 5X16MG316SS 5 20 100 5X20MG316SS 5 25 100 5X25MG316SS 5 30 100 5X30MG316SS 5 35 100 5X35MG316SS 5 40 100 5X40MG316SS 5 45 100 5X45MG316SS 5 50 100 5X50MG316SS 5 60 100 5X60MG316SS 6 10 100 6X10MG316SS 6 12 100 6X12MG316SS 6 16 100 6X16MG316SS 6 20 100 6X20MG316SS 6 25 100 6X25MG316SS 6 30 100 6X30MG316SS 6 35 100 6X35MG316SS 6 40 100 6X40MG316SS 6 45 100 6X45MG316SS 6 50 100 6X50MG316SS 6 55 50 6X55MG316SS 6 60 50 6X60MG316SS 6 65 50 6X65MG316SS 6 70 50 6X70MG316SS 6 75 50 6X75MG316SS 6 80 50 6X80MG316SS 6 90 50 6X90MG316SS 6 100 50 6X100MG316SS 8 10 100 8X10MG316SS 8 12 100 8X12MG316SS 8 16 100 8X16MG316SS 8 20 100 8X20MG316SS 8 25 100 8X25MG316SS 8 30 100 8X30MG316SS 8 35 100 8X35MG316SS 8 40 100 8X40MG316SS 8 45 100 8X45MG316SS 8 50 100 8X50MG316SS 8 55 50 8X55MG316SS 8 60 50 8X60MG316SS 8 65 50 8X65MG316SS 8 70 50 8X70MG316SS 8 75 50 8X75MG316SS 8 80 50 8X80MG316SS 8 90 50 8X90MG316SS 8 100 50 8X100MG316SS
continued…
GRADE 304 METRIC HEXAGON HEAD SET SCREWS continued…
Dia. Length Pack Part No. mm mm qty
12 110 25 12X110MG304SS 12 120 25 12X120MG304SS 12 130 25 12X130MG304SS 12 150 25 12X150MG304SS 14 25 25 14X25MG304SS 14 35 25 14X35MG304SS 14 40 25 14X40MG304SS 14 55 25 14X55MG304SS 14 60 25 14X60MG304SS 14 70 25 14X70MG304SS 16 25 25 16X25MG304SS 16 30 25 16X30MG304SS 16 35 25 16X35MG304SS 16 40 25 16X40MG304SS 16 45 25 16X45MG304SS 16 50 25 16X50MG304SS 16 55 25 16X55MG304SS 16 60 25 16X60MG304SS 16 65 25 16X65MG304SS 16 70 25 16X70MG304SS 16 75 25 16X75MG304SS 16 80 25 16X80MG304SS 16 90 25 16X90MG304SS 16 100 25 16X100MG304SS 20 30 25 20X30MG304SS 20 35 25 20X35MG304SS 20 40 25 20X40MG304SS 20 45 25 20X45MG304SS 20 50 25 20X50MG304SS 20 55 25 20X55MG304SS 20 60 25 20X60MG304SS 20 65 25 20X65MG304SS 20 70 25 20X70MG304SS 20 75 20 20X75MG304SS 20 80 20 20X80MG304SS 20 90 10 20X90MG304SS 20 100 10 20X100MG304SS 24 40 10 24X40MG304SS 24 50 10 24X50MG304SS 24 55 10 24X55MG304SS 24 60 10 24X60MG304SS 24 65 10 24X65MG304SS 24 70 10 24X70MG304SS 24 80 10 24X80MG304SS 24 90 10 24X90MG304SS 24 100 10 24X100MG304SS
GRADE 316 METRIC HEXAGON HEAD SET SCREWS
Dia. Length Pack Part No. mm mm qty
4 8 100 4X8MG316SS 4 10 100 4X10MG316SS 4 12 100 4X12MG316SS 4 16 100 4X16MG316SS 4 20 100 4X20MG316SS
continued…
LOCAL BRANCHESWith Australia’s largest network of local specialised fastener branches there’s a Coventry Fasteners branch near you. Local branches is another way we’re making your job easier.Turn to back cover for your nearest branch.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
BO
LTS
26 AUSTRALIA’S FASTENER SPECIALISTS
BEST VALUEGRADE 316 METRIC HEXAGON HEAD SET SCREWS continued…
Dia. Length Pack Part No. mm mm qty
10 12 100 10X12MG316SS 10 16 100 10X16MG316SS 10 20 100 10X20MG316SS 10 25 100 10X25MG316SS 10 30 100 10X30MG316SS 10 35 100 10X35MG316SS 10 40 100 10X40MG316SS 10 45 100 10X45MG316SS 10 50 100 10X50MG316SS 10 55 50 10X55MG316SS 10 60 50 10X60MG316SS 10 65 50 10X65MG316SS 10 70 50 10X70MG316SS 10 75 50 10X75MG316SS 10 80 50 10X80MG316SS 10 90 50 10X90MG316SS 10 100 50 10X100MG316SS 12 20 100 12X20MG316SS 12 25 100 12X25MG316SS 12 30 100 12X30MG316SS 12 35 100 12X35MG316SS 12 40 50 12X40MG316SS 12 45 50 12X45MG316SS 12 50 50 12X50MG316SS 12 55 25 12X55MG316SS 12 60 25 12X60MG316SS 12 65 25 12X65MG316SS 12 70 25 12X70MG316SS 12 75 25 12X75MG316SS 12 80 25 12X80MG316SS 12 90 25 12X90MG316SS 12 100 25 12X100MG316SS 14 30 25 14X30MG316SS 14 40 25 14X40MG316SS 14 45 25 14X45MG316SS 14 50 25 14X50MG316SS 14 60 25 14X60MG316SS 14 65 25 14X65MG316SS 14 70 25 14X70MG316SS 14 80 25 14X80MG316SS 14 90 25 14X90MG316SS 16 25 25 16X25MG316SS 16 30 25 16X30MG316SS 16 35 25 16X35MG316SS 16 40 25 16X40MG316SS 16 45 25 16X45MG316SS 16 50 25 16X50MG316SS 16 55 25 16X55MG316SS 16 60 25 16X60MG316SS 16 65 25 16X65MG316SS 16 70 25 16X70MG316SS 16 75 25 16X75MG316SS 16 80 25 16X80MG316SS 16 90 25 16X90MG316SS 16 100 25 16X100MG316SS 20 30 25 20X30MG316SS
continued…
GRADE 316 METRIC HEXAGON HEAD SET SCREWS continued…
Dia. Length Pack Part No. mm mm qty
20 35 25 20X35MG316SS 20 40 25 20X40MG316SS 20 45 25 20X45MG316SS 20 50 25 20X50MG316SS 20 55 25 20X55MG316SS 20 60 25 20X60MG316SS 20 65 25 20X65MG316SS 20 70 25 20X70MG316SS 20 75 20 20X75MG316SS 20 80 20 20X80MG316SS 20 90 10 20X90MG316SS 20 100 10 20X100MG316SS 22 50 10 22X50MG316SS 22 60 10 22X60MG316SS 22 70 10 22X70MG316SS 22 75 10 22X75MG316SS 22 80 10 22X80MG316SS 24 40 10 24X40MG316SS 24 50 10 24X50MG316SS 24 60 10 24X60MG316SS 24 65 10 24X65MG316SS 24 70 10 24X70MG316SS 24 80 10 24X80MG316SS 24 90 10 24X90MG316SS 24 100 10 24X100MG316SS 27 60 5 27X60MG316SS 27 80 5 27X80MG316SS 30 90 5 30X90MG316SS
GRADE 304 BSW HEXAGON HEAD SET SCREWS
Dia. Length Pack Part No. inch inch qty
³⁄₁₆ ³⁄₈ 100 316X38BWG304SS ³⁄₁₆ ¹⁄₂ 100 316X12BWG304SS ³⁄₁₆ ⁵⁄₈ 100 316X58BWG304SS ³⁄₁₆ ³⁄₄ 100 316X34BWG304SS ³⁄₁₆ 1 100 316X1BWG304SS ³⁄₁₆ 1 ¹⁄₄ 100 316X1.14BWG304SS ³⁄₁₆ 1 ¹⁄₂ 100 316X1.12BWG304SS ³⁄₁₆ 2 100 316X2BWG304SS
GRADE 316 BSW HEXAGON HEAD SET SCREWS
Dia. Length Pack Part No. inch inch qty
³⁄₁₆ ¹⁄₂ 100 316X12BWG316SS ³⁄₁₆ ⁵⁄₈ 100 316X58BWG316SS ³⁄₁₆ ³⁄₄ 100 316X34BWG316SS ³⁄₁₆ 1 100 316X1BWG316SS ³⁄₁₆ 1 ¹⁄₄ 100 316X1.14BWG316SS ³⁄₁₆ 1 ¹⁄₂ 100 316X1.12BWG316SS ³⁄₁₆ 2 100 316X2BWG316SS ³⁄₁₆ 2 ¹⁄₂ 100 316X2.12BWG316SS ³⁄₁₆ 3 100 316X3BWG316SS
continued…
As a fastener specialist, Coventry Fasteners' extensive industry experience enables our staff to provide comprehensive technical support for all types of fasteners. Our access to information and ability to source many different materials and coatings, means you can feel comfortable that you are getting the type of support that only comes from experience and a strong network of manufacturing partners.
visit us at www.coventryfasteners.com.au
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCH TURN TO BACK COVER FOR YOUR NEAREST BRANCH
Specialist advice when you need it
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
BO
LTS
28 AUSTRALIA’S FASTENER SPECIALISTS
BRANCHES AUSTRALIA WIDEGRADE 304 UNC HEXAGON HEAD SET SCREWS continued…
Dia. Length Pack Part No. inch inch qty
³⁄₈ ⁵⁄₈ 100 38X58NCG304SS ³⁄₈ ³⁄₄ 100 38X34NCG304SS ³⁄₈ 1 100 38X1NCG304SS ³⁄₈ 1 ¹⁄₄ 100 38X1.14NCG304SS ³⁄₈ 1 ¹⁄₂ 100 38X1.12NCG304SS ³⁄₈ 1 ³⁄₄ 100 38X1.34NCG304SS ³⁄₈ 2 100 38X2NCG304SS ³⁄₈ 2 ¹⁄₄ 50 38X2.14NCG304SS ³⁄₈ 2 ¹⁄₂ 50 38X2.12NCG304SS ³⁄₈ 3 50 38X3NCG304SS ³⁄₈ 3 ¹⁄₂ 50 38X3.12NCG304SS ³⁄₈ 4 50 38X4NCG304SS ¹⁄₂ 1 100 12X1NCG304SS ¹⁄₂ 1 ¹⁄₄ 100 12X1.14NCG304SS ¹⁄₂ 1 ¹⁄₂ 50 12X1.12NCG304SS ¹⁄₂ 1 ³⁄₄ 50 12X1.34NCG304SS ¹⁄₂ 2 50 12X2NCG304SS ¹⁄₂ 2 ¹⁄₂ 25 12X2.12NCG304SS ¹⁄₂ 3 25 12X3NCG304SS ¹⁄₂ 3 ¹⁄₂ 25 12X3.12NCG304SS ¹⁄₂ 4 25 12X4NCG304SS ⁵⁄₈ 1 25 58X1NCG304SS ⁵⁄₈ 1 ¹⁄₄ 25 58X1.14NCG304SS ⁵⁄₈ 1 ¹⁄₂ 25 58X1.12NCG304SS ⁵⁄₈ 1 ³⁄₄ 25 58X1.34NCG304SS ⁵⁄₈ 2 25 58X2NCG304SS ⁵⁄₈ 2 ¹⁄₄ 25 58X2.14NCG304SS ⁵⁄₈ 2 ¹⁄₂ 25 58X2.12NCG304SS ⁵⁄₈ 3 25 58X3NCG304SS ⁵⁄₈ 3 ¹⁄₂ 25 58X3.12NCG304SS ⁵⁄₈ 4 25 58X4NCG304SS ³⁄₄ 1 ¹⁄₄ 25 34X1.14NCG304SS ³⁄₄ 1 ¹⁄₂ 25 34X1.12NCG304SS ³⁄₄ 1 ³⁄₄ 25 34X1.34NCG304SS ³⁄₄ 2 25 34X2NCG304SS ³⁄₄ 2 ¹⁄₄ 25 34X2.14NCG304SS ³⁄₄ 2 ¹⁄₂ 25 34X2.12NCG304SS ³⁄₄ 3 20 34X3NCG304SS ³⁄₄ 3 ¹⁄₂ 10 34X3.12NCG304SS ³⁄₄ 4 10 34X4NCG304SS
GRADE 316 UNC HEXAGON HEAD SET SCREWS
Dia. Length Pack Part No. inch inch qty
¹⁄₄ ¹⁄₂ 100 14X12NCG316SS ¹⁄₄ ⁵⁄₈ 100 14X58NCG316SS ¹⁄₄ ³⁄₄ 100 14X34NCG316SS ¹⁄₄ 1 100 14X1NCG316SS ¹⁄₄ 1 ¹⁄₄ 100 14X1.14NCG316SS ¹⁄₄ 1 ¹⁄₂ 100 14X1.12NCG316SS ¹⁄₄ 1 ³⁄₄ 100 14X1.34NCG316SS ¹⁄₄ 2 100 14X2NCG316SS ¹⁄₄ 2 ¹⁄₂ 50 14X2.12NCG316SS ¹⁄₄ 3 50 14X3NCG316SS ⁵⁄₁₆ ¹⁄₂ 100 516X12NCG316SS
continued…
GRADE 316 BSW HEXAGON HEAD SET SCREWS continued…
Dia. Length Pack Part No. mm mm qty
¹⁄₂ ³⁄₄ 100 12X34BWG316SS ¹⁄₂ 1 100 12X1BWG316SS ¹⁄₂ 1 ¹⁄₄ 100 12X1.14BWG316SS ¹⁄₂ 1 ¹⁄₂ 50 12X1.12BWG316SS ¹⁄₂ 1 ³⁄₄ 50 12X1.34BWG316SS ¹⁄₂ 2 50 12X2BWG316SS ¹⁄₂ 2 ¹⁄₂ 25 12X2.12BWG316SS ¹⁄₂ 3 25 12X3BWG316SS ¹⁄₂ 3 ¹⁄₂ 25 12X3.12BWG316SS ¹⁄₂ 4 25 12X4BWG316SS
GRADE 304 UNC HEXAGON HEAD SET SCREWS
Dia. Length Pack Part No. inch inch qty
8-32 ¹⁄₂ 100 8-32X12NCG304SS 8-32 1 100 8-32X1NCG304SS 8-32 1 ¹⁄₂ 100 8-32X1.12NCG304SS ¹⁄₄ ³⁄₈ 100 14X38NCG304SS ¹⁄₄ ¹⁄₂ 100 14X12NCG304SS ¹⁄₄ ⁵⁄₈ 100 14X58NCG304SS ¹⁄₄ ³⁄₄ 100 14X34NCG304SS ¹⁄₄ ⁷⁄₈ 100 14X78NCG304SS ¹⁄₄ 1 100 14X1NCG304SS ¹⁄₄ 1 ¹⁄₄ 100 14X1.14NCG304SS ¹⁄₄ 1 ¹⁄₂ 100 14X1.12NCG304SS ¹⁄₄ 1 ³⁄₄ 100 14X1.34NCG304SS ¹⁄₄ 2 100 14X2NCG304SS ¹⁄₄ 2 ¹⁄₂ 50 14X2.12NCG304SS ¹⁄₄ 3 50 14X3NCG304SS ¹⁄₄ 4 50 14X4NCG304SS ⁵⁄₁₆ ¹⁄₂ 100 516X12NCG304SS ⁵⁄₁₆ ⁵⁄₈ 100 516X58NCG304SS ⁵⁄₁₆ ³⁄₄ 100 516X34NCG304SS ⁵⁄₁₆ 1 100 516X1NCG304SS ⁵⁄₁₆ 1 ¹⁄₄ 100 516X1.14NCG304SS ⁵⁄₁₆ 1 ¹⁄₂ 100 516X1.12NCG304SS ⁵⁄₁₆ 1 ³⁄₄ 100 516X1.34NCG304SS ⁵⁄₁₆ 2 100 516X2NCG304SS ⁵⁄₁₆ 2 ¹⁄₄ 50 516X2.14NCG304SS ⁵⁄₁₆ 2 ¹⁄₂ 50 516X2.12NCG304SS ⁵⁄₁₆ 3 50 516X3NCG304SS ⁵⁄₁₆ 4 50 516X4NCG304SS ³⁄₈ ¹⁄₂ 100 38X12NCG304SS
continued…
GET TO KNOW USCoventry Fasteners is part of the publicly listed Australian company Coventry Group Ltd with a proud history of servicing mining, construction and manufacturing industries. Find out more at www.coventryfasteners.com.au
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
BO
LTS29AUSTRALIA’S FASTENER SPECIALISTS
BRANCHES AUSTRALIA WIDEGRADE 316 UNC HEXAGON HEAD SET SCREWS continued…
Dia. Length Pack Part No. inch inch qty
⁵⁄₁₆ ⁵⁄₈ 100 516X58NCG316SS ⁵⁄₁₆ ³⁄₄ 100 516X34NCG316SS ⁵⁄₁₆ 1 100 516X1NCG316SS ⁵⁄₁₆ 1 ¹⁄₄ 100 516X1.14NCG316SS ⁵⁄₁₆ 1 ¹⁄₂ 100 516X1.12NCG316SS ⁵⁄₁₆ 1 ³⁄₄ 100 516X1.34NCG316SS ⁵⁄₁₆ 2 100 516X2NCG316SS ⁵⁄₁₆ 2 ¹⁄₂ 50 516X2.12NCG316SS ⁵⁄₁₆ 3 50 516X3NCG316SS ⁵⁄₁₆ 4 50 516X4NCG316SS ³⁄₈ ¹⁄₂ 100 38X12NCG316SS ³⁄₈ ³⁄₄ 100 38X34NCG316SS ³⁄₈ 1 100 38X1NCG316SS ³⁄₈ 1 ¹⁄₄ 100 38X1.14NCG316SS ³⁄₈ 1 ¹⁄₂ 100 38X1.12NCG316SS ³⁄₈ 1 ³⁄₄ 100 38X1.34NCG316SS ³⁄₈ 2 100 38X2NCG316SS ³⁄₈ 2 ¹⁄₄ 50 38X2.14NCG316SS ³⁄₈ 2 ¹⁄₂ 50 38X2.12NCG316SS ³⁄₈ 3 50 38X3NCG316SS ³⁄₈ 4 50 38X4NCG316SS ⁷⁄₁₆ 1 100 716X1NCG316SS ⁷⁄₁₆ 1 ¹⁄₄ 100 716X1.14NCG316SS ⁷⁄₁₆ 1 ¹⁄₂ 50 716X1.12NCG316SS ¹⁄₂ ³⁄₄ 100 12X34NCG316SS ¹⁄₂ 1 100 12X1NCG316SS ¹⁄₂ 1 ¹⁄₄ 100 12X1.14NCG316SS ¹⁄₂ 1 ¹⁄₂ 50 12X1.12NCG316SS ¹⁄₂ 1 ³⁄₄ 50 12X1.34NCG316SS ¹⁄₂ 2 50 12X2NCG316SS ¹⁄₂ 2 ¹⁄₂ 25 12X2.12NCG316SS ¹⁄₂ 3 25 12X3NCG316SS ¹⁄₂ 4 25 12X4NCG316SS ⁵⁄₈ 1 25 58X1NCG316SS ⁵⁄₈ 1 ¹⁄₄ 25 58X1.14NCG316SS ⁵⁄₈ 1 ¹⁄₂ 25 58X1.12NCG316SS ⁵⁄₈ 1 ³⁄₄ 25 58X1.34NCG316SS ⁵⁄₈ 2 25 58X2NCG316SS ⁵⁄₈ 2 ¹⁄₂ 25 58X2.12NCG316SS ⁵⁄₈ 3 25 58X3NCG316SS ⁵⁄₈ 3 ¹⁄₂ 25 58X3.12NCG316SS ⁵⁄₈ 4 25 58X4NCG316SS ³⁄₄ 1 ¹⁄₄ 25 34X1.14NCG316SS ³⁄₄ 1 ¹⁄₂ 25 34X1.12NCG316SS ³⁄₄ 1 ³⁄₄ 25 34X1.34NCG316SS ³⁄₄ 2 25 34X2NCG316SS ³⁄₄ 2 ¹⁄₄ 25 34X2.14NCG316SS ³⁄₄ 2 ¹⁄₂ 25 34X2.12NCG316SS ³⁄₄ 3 20 34X3NCG316SS ³⁄₄ 3 ¹⁄₂ 10 34X3.12NCG316SS ³⁄₄ 4 10 34X4NCG316SS ⁷⁄₈ 2 10 78X2NCG316SS ⁷⁄₈ 2 ¹⁄₂ 10 78X2.12NCG316SS ⁷⁄₈ 3 10 78X3NCG316SS 1 2 10 1X2NCG316SS 1 2 ¹⁄₂ 10 1X2.12NCG316SS 1 3 10 1X3NCG316SS 1 3 ¹⁄₂ 10 1X3.12NCG316SS
GRADE 304 UNF HEXAGON HEAD SET SCREWS
Dia. Length Pack Part No. inch inch qty
10-32 ¹⁄₂ 50 10-32X12NFG304SS 10-32 ⁵⁄₈ 50 10-32X58NFG304SS 10-32 ³⁄₄ 50 10-32X34NFG304SS 10-32 1 50 10-32X1NFG304SS 10-32 1 ¹⁄₄ 50 10-32X1.14NFG304SS 10-32 1 ¹⁄₂ 50 10-32X1.12NFG304SS 10-32 2 50 10-32X2NFG304SS ¹⁄₄ ¹⁄₂ 50 14X12NFG304SS ¹⁄₄ ⁵⁄₈ 50 14X58NFG304SS ¹⁄₄ ³⁄₄ 50 14X34NFG304SS ¹⁄₄ 1 50 14X1NFG304SS ⁵⁄₁₆ ⁵⁄₈ 50 516X58NFG304SS ⁵⁄₁₆ ³⁄₄ 50 516X34NFG304SS ⁵⁄₁₆ 1 50 516X1NFG304SS ⁵⁄₁₆ 1 ¹⁄₄ 50 516X1.14NFG304SS ³⁄₈ ³⁄₄ 50 38X34NFG304SS ³⁄₈ 1 50 38X1NFG304SS ³⁄₈ 1 ¹⁄₄ 50 38X1.14NFG304SS ⁷⁄₁₆ 1 50 716X1NFG304SS ⁷⁄₁₆ 1 ¹⁄₄ 50 716X1.14NFG304SS ⁷⁄₁₆ 1 ¹⁄₂ 50 716X1.12NFG304SS ¹⁄₂ 1 25 12X1NFG304SS ¹⁄₂ 1 ¹⁄₄ 25 12X1.14NFG304SS ¹⁄₂ 1 ¹⁄₂ 25 12X1.12NFG304SS ⁵⁄₈ 1 ¹⁄₄ 25 58X1.14NFG304SS ⁵⁄₈ 1 ¹⁄₂ 25 58X1.12NFG304SS ⁵⁄₈ 2 25 58X2NFG304SS
Cup Head Bolts
GRADE 304 UNC CUP HEAD BOLTS
Dia. Length Pack Part No. inch inch qty
¹⁄₄ ³⁄₄ 100 14X34NCG304CB ¹⁄₄ 1 100 14X1NCG304CB ¹⁄₄ 1 ¹⁄₄ 100 14X1.14NCG304CB ¹⁄₄ 1 ¹⁄₂ 100 14X1.12NCG304CB ¹⁄₄ 2 100 14X2NCG304CB ¹⁄₄ 2 ¹⁄₂ 50 14X2.12NCG304CB ¹⁄₄ 3 50 14X3NCG304CB ¹⁄₄ 4 50 14X4NCG304CB ¹⁄₄ 5 25 14X5NCG304CB ¹⁄₄ 6 25 14X6NCG304CB ⁵⁄₁₆ 1 100 516X1NCG304CB ⁵⁄₁₆ 1 ¹⁄₄ 100 516X1.14NCG304CB
continued…
BO
LTS
30
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
AUSTRALIA’S FASTENER SPECIALISTS
SPECIALIST ADVICEGRADE 304 UNC CUP HEAD BOLTS continued…
Dia. Length Pack Part No. inch inch qty
⁵⁄₁₆ 1 ¹⁄₂ 100 516X1.12NCG304CB ⁵⁄₁₆ 2 100 516X2NCG304CB ⁵⁄₁₆ 2 ¹⁄₂ 50 516X2.12NCG304CB ⁵⁄₁₆ 3 50 516X3NCG304CB ⁵⁄₁₆ 4 25 516X4NCG304CB ⁵⁄₁₆ 5 25 516X5NCG304CB ⁵⁄₁₆ 6 25 516X6NCG304CB ³⁄₈ 1 100 38X1NCG304CB ³⁄₈ 1 ¹⁄₄ 100 38X1.14NCG304CB ³⁄₈ 1 ¹⁄₂ 100 38X1.12NCG304CB ³⁄₈ 2 100 38X2NCG304CB ³⁄₈ 2 ¹⁄₂ 50 38X2.12NCG304CB ³⁄₈ 3 50 38X3NCG304CB ³⁄₈ 3 ¹⁄₂ 25 38X3.12NCG304CB ³⁄₈ 4 25 38X4NCG304CB ³⁄₈ 5 25 38X5NCG304CB ³⁄₈ 6 25 38X6NCG304CB ¹⁄₂ 1 ¹⁄₄ 25 12X1.14NCG304CB ¹⁄₂ 2 25 12X2NCG304CB ¹⁄₂ 2 ¹⁄₂ 25 12X2.12NCG304CB ¹⁄₂ 3 25 12X3NCG304CB ¹⁄₂ 4 25 12X4NCG304CB ¹⁄₂ 5 25 12X5NCG304CB ¹⁄₂ 6 25 12X6NCG304CB
GRADE 316 METRIC CUP HEAD BOLTS
Dia. Length Pack Part No. mm mm qty
6 20 100 6X20MG316CB 6 25 100 6X25MG316CB 6 30 100 6X30MG316CB 6 40 100 6X40MG316CB 6 50 100 6X50MG316CB 6 60 50 6X60MG316CB 6 70 50 6X70MG316CB 6 80 50 6X80MG316CB 8 20 50 8X20MG316CB 8 25 50 8X25MG316CB 8 30 50 8X30MG316CB 8 40 50 8X40MG316CB 8 50 50 8X50MG316CB 8 60 50 8X60MG316CB 8 70 50 8X70MG316CB 8 80 50 8X80MG316CB 8 100 50 8X100MG316CB 10 25 50 10X25MG316CB 10 30 50 10X30MG316CB
continued…
GRADE 316 METRIC CUP HEAD BOLTS continued…
Dia. Length Pack Part No. mm mm qty
10 35 50 10X35MG316CB 10 40 50 10X40MG316CB 10 50 50 10X50MG316CB 10 60 25 10X60MG316CB 10 70 25 10X70MG316CB 10 80 25 10X80MG316CB 10 100 25 10X100MG316CB 10 120 25 10X120MG316CB 12 40 25 12X40MG316CB 12 50 25 12X50MG316CB 12 60 25 12X60MG316CB 12 80 25 12X80MG316CB 12 100 25 12X100MG316CB 12 130 25 12X130MG316CB
Hexagon Head Coach Screws
GRADE 316 METRIC HEXAGON HEAD COACH SCREWS
Dia. Length Pack Part No. mm mm qty
6 30 100 6X30MG316CS 6 40 100 6X40MG316CS 6 50 100 6X50MG316CS 6 65 50 6X65MG316CS 6 75 50 6X75MG316CS 6 100 50 6X100MG316CS 8 30 50 8X30MG316CS 8 40 50 8X40MG316CS 8 50 50 8X50MG316CS 8 65 50 8X65MG316CS 8 75 50 8X75MG316CS 8 100 50 8X100MG316CS 10 40 50 10X40MG316CS 10 50 50 10X50MG316CS 10 65 25 10X65MG316CS 10 75 25 10X75MG316CS 10 100 25 10X100MG316CS 10 120 25 10X120MG316CS 10 150 25 10X150MG316CS 12 50 25 12X50MG316CS 12 65 25 12X65MG316CS 12 75 25 12X75MG316CS 12 100 25 12X100MG316CS 12 120 25 12X120MG316CS 12 130 25 12X130MG316CS 12 150 25 12X150MG316CS 12 180 25 12X180MG316CS
CAN’T FIND IT?Can’t find what you’re looking for? The friendly team at your local Coventry Fasteners branch can help. Personal service is another way we’re making your job easier.Turn to back cover for your nearest branch.
31
HEXAGON STANDARD NUTS/NYLON INSERT LOCK NUTS/HEXAGON LOCNUTS/DOME NUTS/TWO PIECE DOME NUTS/WING NUTS/LEFT HAND NUTSGLENLOCH NUTS/HEXAGON WELD NUTS/HEXAGON STANDARD NUTS/NYLOINSERT LOCK NUTS/HEXAGON LOCK NUTS/DOME NUTS/TWO PIECE DOMNUTS/WING NUTS/LEFT HAND NUTS/GLENLOCH NUTS/HEXAGON WELNUTS/HEXAGON STANDARD NUTS/NYLON INSERT LOCK NUTS/HEXAGOLOCK NUTS/DOME NUTS/TWO PIECE DOME NUTS/WING NUTS/LEFT HANNUTS/GLENLOCH NUTS/HEXAGON WELD NUTS/HEXAGON STANDARD NUTSNYLON INSERT LOCK NUTS/HEXAGON LOCK NUTS/DOME NUTS/TWO PIECNUTS
NU
TS
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
32 AUSTRALIA’S FASTENER SPECIALISTS
FAST DELIVERY
Contact your local Coventry Fasteners branch for more information on this product (see back of catalogue for your nearest branch).
James Glen, Australia and New Zealand’s premier stainless steel fastener brand, has an enviable reputation for high quality products. With its modern equipped chemical metallurgical laboratory for analysing and determining the material-specific properties of all James Glen fasteners, James Glen has extensive quality testing and meets high industry standards. Coventry Fasteners is the largest retailer of James Glen stainless steel fasteners because quality in fasteners is essential. For more information about James Glen, including product training and technical manuals, visit www.jamesglen.com.au. Quality products - just another way we’re making your job easier.
Quality you can rely on.
WHY WE STOCK IT
WANT TO KNOW MORE?
NU
TS33AUSTRALIA’S FASTENER SPECIALISTS
FAST DELIVERY
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
GRADE 304 BSW HEXAGON STANDARD NUTS
Dia. Pack Part No. inch qty
¹⁄₈ 200 18BWG304N ⁵⁄₃₂ 200 532BWG304N ¹⁄₂ 100 12BWG304N ⁵⁄₈ 50 58BWG304N ³⁄₄ 50 34BWG304N
GRADE 316 BSW HEXAGON STANDARD NUTS
Dia. Pack Part No. inch qty
³⁄₁₆ 200 316BWG316N ¹⁄₄ 100 14BWG316N ¹⁄₂ 100 12BWG316N ³⁄₄ 25 34BWG316N
GRADE 304 UNC HEXAGON STANDARD NUTS
Dia. Pack Part No. inch qty
2-56 200 2-56NCG304N 4-40 200 4-40NCG304N 5-40 200 5-40NCG304N 6-32 200 6-32NCG304N 8-32 200 8-32NCG304N 10-24 200 10-24NCG304N 12-24 100 12-24NCG304N ¹⁄₄ 100 14NCG304N ⁵⁄₁₆ 100 516NCG304N ³⁄₈ 100 38NCG304N ¹⁄₂ 100 12NCG304N ⁹⁄₁₆ 50 916NCG304N ⁵⁄₈ 50 58NCG304N ³⁄₄ 50 34NCG304N ⁷⁄₈ 25 78NCG304N 1 25 1NCG304N 1 ¹⁄₈ 20 1.18NCG304N 1 ¹⁄₄ 10 1.14NCG304N
GRADE 316 UNC HEXAGON STANDARD NUTS
Dia. Pack Part No. inch qty
8-32 200 8-32NCG316N 10-24 200 10-24NCG316N ¹⁄₄ 100 14NCG316N ⁵⁄₁₆ 100 516NCG316N ³⁄₈ 100 38NCG316N ⁷⁄₁₆ 100 716NCG316N ¹⁄₂ 100 12NCG316N ⁹⁄₁₆ 50 916NCG316N ⁵⁄₈ 50 58NCG316N ³⁄₄ 50 34NCG316N ⁷⁄₈ 25 78NCG316N 1 25 1NCG316N 1 ¹⁄₈ 20 1.18NCG316N
continued…
Hexagon Standard Nuts
GRADE 304 METRIC HEXAGON STANDARD NUTS
Dia. Pack Part No. mm qty
1.6 200 1.6MG304N 2 200 2MG304N 2.5 200 2.5MG304N 3 200 3MG304N 4 200 4MG304N 5 200 5MG304N 6 100 6MG304N 7 100 7MG304N 8 100 8MG304N 10 100 10MG304N 12 100 12MG304N 14 50 14MG304N 16 50 16MG304N 20 50 20MG304N 24 25 24MG304N 30 10 30MG304N
GRADE 316 METRIC HEXAGON STANDARD NUTS
Dia. Pack Part No. mm qty
2 200 2MG316N 2.5 200 2.5MG316N 3 200 3MG316N 3.5 200 3.5MG316N 4 200 4MG316N 5 200 5MG316N 6 100 6MG316N 8 100 8MG316N 10 100 10MG316N 12 100 12MG316N 14 50 14MG316N 16 50 16MG316N 18 50 18MG316N 20 50 20MG316N 22 25 22MG316N 24 25 24MG316N 27 25 27MG316N 30 10 30MG316N 33 10 33MG316N 36 5 36MG316N 39 5 39MG316N 42 5 42MG316N 48 5 48MG316N
NU
TS
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
34 AUSTRALIA’S FASTENER SPECIALISTS
FRIENDLY SERVICEGRADE 304 METRIC NYLON INSERT LOCK NUTS continued…
Dia. Pack Part No. mm qty
8 100 8MG304NN 10 100 10MG304NN 12 100 12MG304NN 16 50 16MG304NN 20 25 20MG304NN
GRADE 316 METRIC NYLON INSERT LOCK NUTS
Dia. Pack Part No. mm qty
3 100 3MG316NN 4 100 4MG316NN 5 100 5MG316NN 6 100 6MG316NN 8 100 8MG316NN 10 100 10MG316NN 12 100 12MG316NN 14 50 14MG316NN 16 50 16MG316NN 18 50 18MG316NN 20 25 20MG316NN 22 25 22MG316NN 24 25 24MG316NN 27 20 27MG316NN 30 10 30MG316NN 36 5 36MG316NN
GRADE 304 BSW NYLON INSERT LOCK NUTS
Dia. Pack Part No. inch qty
¹⁄₂ 100 12BWG304NN
GRADE 316 BSW NYLON INSERT LOCK NUTS
Dia. Pack Part No. inch qty
¹⁄₂ 100 12BWG316NN
GRADE 304 UNC NYLON INSERT LOCK NUTS
Dia. Pack Part No. inch qty
4-40 100 4-40NCG304NN 5-40 100 5-40NCG304NN 6-32 100 6-32NCG304NN 8-32 100 8-32NCG304NN 10-24 100 10-24NCG304NN ¹⁄₄ 100 14NCG304NN ⁵⁄₁₆ 100 516NCG304NN ³⁄₈ 100 38NCG304NN ¹⁄₂ 100 12NCG304NN ⁵⁄₈ 50 58NCG304NN ³⁄₄ 25 34NCG304NN 1 25 1NCG304NN
GRADE 316 UNC HEXAGON STANDARD NUTS continued…
Dia. Pack Part No. inch qty
1 ¹⁄₄ 10 1.14NCG316N 1 ¹⁄₂ 5 1.12NCG316N 1 ³⁄₄ 5 1.34NCG316N
GRADE 304 UNF HEXAGON STANDARD NUTS
Dia. Pack Part No. inch qty
8-36 200 8-36NFG304N 10-32 200 10-32NFG304N ¹⁄₄ 100 14NFG304N ⁵⁄₁₆ 100 516NFG304N ³⁄₈ 100 38NFG304N ¹⁄₂ 50 12NFG304N
GRADE 316 UNF HEXAGON STANDARD NUTS
Dia. Pack Part No. inch qty
10-32 200 10-32NFG316N ¹⁄₄ 100 14NFG316N ⁵⁄₁₆ 100 516NFG316N ³⁄₈ 100 38NFG316N ⁷⁄₁₆ 50 716NFG316N ¹⁄₂ 50 12NFG316N ⁵⁄₈ 25 58NFG316N ³⁄₄ 25 34NFG316N ⁷⁄₈ 25 78NFG316N 1 25 1NFG316N
Nylon Insert Lock Nuts
GRADE 304 METRIC NYLON INSERT LOCK NUTS
Dia. Pack Part No. mm qty
2 100 2MG304NN 2.5 100 2.5MG304NN 3 100 3MG304NN 4 100 4MG304NN 5 100 5MG304NN 6 100 6MG304NN
continued…
NU
TS
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
35AUSTRALIA’S FASTENER SPECIALISTS
FRIENDLY SERVICEGRADE 304 UNC NYLON INSERT LOCK NUTS – THIN TYPE
Dia. Pack Part No. inch qty
¹⁄₄ 100 14NCG304NNT ⁵⁄₁₆ 100 516NCG304NNT ³⁄₈ 100 38NCG304NNT
GRADE 316 UNC NYLON INSERT LOCK NUTS
Dia. Pack Part No. inch qty
10-24 100 10-24NCG316NN ¹⁄₄ 100 14NCG316NN ⁵⁄₁₆ 100 516NCG316NN ³⁄₈ 100 38NCG316NN ⁷⁄₁₆ 100 716NCG316NN ¹⁄₂ 100 12NCG316NN ⁵⁄₈ 50 58NCG316NN ³⁄₄ 25 34NCG316NN ⁷⁄₈ 25 78NCG316NN 1 25 1NCG316NN 1 ¹⁄₈ 20 1.18NCG316NN 1 ¹⁄₄ 10 1.14NCG316NN 1 ¹⁄₂ 5 1.12NCG316NN
GRADE 304 UNF NYLON INSERT LOCK NUTS
Dia. Pack Part No. inch qty
10-32 100 10-32NFG304NN ¹⁄₄ 100 14NFG304NN ⁵⁄₁₆ 100 516NFG304NN ³⁄₈ 100 38NFG304NN
GRADE 304 UNF NYLON INSERT LOCK NUTS – THIN TYPE
Dia. Pack Part No. inch qty
³⁄₈ 100 38NFG304NNT ¹⁄₂ 50 12NFG304NNT
GRADE 316 UNF NYLON INSERT LOCK NUTS
Dia. Pack Part No. inch qty
¹⁄₄ 100 14NFG316NN ⁵⁄₁₆ 100 516NFG316NN ³⁄₈ 100 38NFG316NN ⁷⁄₁₆ 50 716NFG316NN ¹⁄₂ 50 12NFG316NN ⁵⁄₈ 25 58NFG316NN ³⁄₄ 25 34NFG316NN 1 25 1NFG316NN
Hexagon Lock Nuts
GRADE 304 METRIC HEXAGON LOCK NUTS
Dia. Pack Part No. mm qty
3 200 3MG304LN 4 100 4MG304LN 5 100 5MG304LN 6 100 6MG304LN 8 100 8MG304LN 10 100 10MG304LN 12 50 12MG304LN 16 50 16MG304LN 20 25 20MG304LN
GRADE 316 METRIC HEXAGON LOCK NUTS
Dia. Pack Part No. mm qty
4 100 4MG316LN 5 100 5MG316LN 6 100 6MG316LN 8 100 8MG316LN 10 100 10MG316LN 12 50 12MG316LN 14 50 14MG316LN 16 50 16MG316LN 20 25 20MG316LN 24 25 24MG316LN 30 10 30MG316LN
GRADE 304 UNC HEXAGON LOCK NUTS
Dia. Pack Part No. inch qty
¹⁄₄ 100 14NCG304LN ⁵⁄₁₆ 100 516NCG304LN ³⁄₈ 100 38NCG304LN ¹⁄₂ 50 12NCG304LN
WE ALSO SUPPLY INDUSTRIAL, CONSTRUCTION AND SPECIALISED FASTENERS AS WELL AS ASSOCIATED TOOLS AND CONSUMABLES.
Call your nearest branch now for a catalogue.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
NU
TS36 AUSTRALIA’S FASTENER SPECIALISTS
HUGE RANGEDome Nuts
GRADE 304 METRIC DOME NUTS
Dia. Pack Part No. mm qty
3 100 3MG304DN 4 100 4MG304DN 5 100 5MG304DN 6 100 6MG304DN 8 100 8MG304DN 10 100 10MG304DN 12 50 12MG304DN 16 50 16MG304DN
GRADE 316 METRIC DOME NUTS
Dia. Pack Part No. mm qty
4 100 4MG316DN 5 100 5MG316DN 6 100 6MG316DN 8 100 8MG316DN 10 100 10MG316DN 12 50 12MG316DN 16 50 16MG316DN 20 25 20MG316DN 24 25 24MG316DN
GRADE 304 UNC DOME NUTS
Dia. Pack Part No. inch qty
8-32 100 8-32NCG304DN 10-24 100 10-24NCG304DN ¹⁄₄ 100 14NCG304DN ⁵⁄₁₆ 100 516NCG304DN ³⁄₈ 100 38NCG304DN ⁷⁄₁₆ 50 716NCG304DN ¹⁄₂ 50 12NCG304DN ⁵⁄₈ 50 58NCG304DN
GRADE 304 UNF DOME NUTS
Dia. Pack Part No. inch qty
10-32 100 10-32NFG304DN ¹⁄₄ 100 14NFG304DN ⁵⁄₁₆ 100 516NFG304DN ³⁄₈ 100 38NFG304DN ⁷⁄₁₆ 50 716NFG304DN ¹⁄₂ 50 12NFG304DN
GRADE 316 UNC HEXAGON LOCK NUTS
Dia. Pack Part No. inch qty
¹⁄₄ 100 14NCG316LN ⁵⁄₁₆ 100 516NCG316LN ³⁄₈ 100 38NCG316LN ¹⁄₂ 50 12NCG316LN ⁵⁄₈ 50 58NCG316LN ³⁄₄ 25 34NCG316LN ⁷⁄₈ 25 78NCG316LN 1 25 1NCG316LN
GRADE 316 UNF HEXAGON LOCK NUTS
Dia. Pack Part No. inch qty
¹⁄₄ 100 14NFG316LN ⁵⁄₁₆ 100 516NFG316LN ³⁄₈ 100 38NFG316LN ¹⁄₂ 50 12NFG316LN ⁵⁄₈ 50 58NFG316LN ³⁄₄ 25 34NFG316LN 1 25 1NFG316LN
GRADE 316 BSW HEXAGON LOCK NUTS
Dia. Pack Part No. inch qty
¹⁄₂ 50 12BWG316LN
DOES IT FIT?Choosing the correct fastener for the job is essential. If you’re not sure of the grade, protective coating, head type or thread for the job ask us. Specialist advice is another way we’re making your job easier. Turn to back cover for your nearest branch.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
NU
TS37AUSTRALIA’S FASTENER SPECIALISTS
HUGE RANGETwo-Piece Dome Nuts
GRADE 304 METRIC TWO-PIECE WELDED DOME NUTS
Dia. Pack Part No. mm qty
4 100 4MG304DN2 5 100 5MG304DN2 6 100 6MG304DN2 8 100 8MG304DN2 10 100 10MG304DN2 12 50 12MG304DN2 16 50 16MG304DN2 20 25 20MG304DN2
GRADE 304 BSW TWO-PIECE WELDED DOME NUTS
Dia. Pack Part No. inch qty
¹⁄₂ 50 12BWG304DN2
GRADE 304 UNC TWO-PIECE WELDED DOME NUTS
Dia. Pack Part No. inch qty
8-32 100 8-32NCG304DN2 10-24 100 10-24NCG304DN2 ¹⁄₄ 100 14NCG304DN2 ⁵⁄₁₆ 100 516NCG304DN2 ³⁄₈ 100 38NCG304DN2 ¹⁄₂ 100 12NCG304DN2 ⁵⁄₈ 100 58NCG304DN2
Wing Nuts
GRADE 304 METRIC WING NUTS
Dia. Pack Part No. mm qty
3 100 3MG304WN 4 100 4MG304WN 5 100 5MG304WN 6 100 6MG304WN 8 100 8MG304WN 10 100 10MG304WN 12 50 12MG304WN 16 25 16MG304WN 20 25 20MG304WN
GRADE 316 METRIC WING NUTS
Dia. Pack Part No. mm qty
3 100 3MG316WN 4 100 4MG316WN 5 100 5MG316WN 6 100 6MG316WN 8 100 8MG316WN 10 100 10MG316WN 12 50 12MG316WN 16 25 16MG316WN
GRADE 304 UNC WING NUTS
Dia. Pack Part No. inch qty
10-24 100 10-24NCG304WN ¹⁄₄ 100 14NCG304WN ⁵⁄₁₆ 100 516NCG304WN ³⁄₈ 100 38NCG304WN ¹⁄₂ 50 12NCG304WN ³⁄₄ 25 34NCG304WN
GRADE 316 UNC WING NUTS
Dia. Pack Part No. inch qty
10-24 100 10-24NCG316WN ¹⁄₄ 100 14NCG316WN ⁵⁄₁₆ 100 516NCG316WN ³⁄₈ 100 38NCG316WN ¹⁄₂ 50 12NCG316WN ⁵⁄₈ 25 58NCG316WN
For the latestproducts and special offers
pick up a free copy of
Fastener Torque from your
nearest branch.
STAY INFORMED WITH FASTENER TORQUE.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
NU
TS38 AUSTRALIA’S FASTENER SPECIALISTS
BEST VALUEGRADE 304 UNF WING NUTS
Dia. Pack Part No. inch qty
10-32 100 10-32NFG304WN ¹⁄₄ 100 14NFG304WN ⁵⁄₁₆ 100 516NFG304WN ³⁄₈ 100 38NFG304WN
GRADE 304 BSW WING NUTS
Dia. Pack Part No. inch qty
¹⁄₂ 50 12BWG304WN
GRADE 316 BSW WING NUTS
Dia. Pack Part No. inch qty
¹⁄₂ 50 12BWG316WN
Left Hand Nuts
GRADE 304 METRIC LEFT HAND NUTS
Dia. Pack Part No. mm qty
5 1 5MG304LHN 6 1 6MG304LHN 8 1 8MG304LHN 10 1 10MG304LHN 12 1 12MG304LHN 16 1 16MG304LHN
Glenloch Nuts
GRADE 304 METRIC GLENLOCH NUTS
Dia. Pack Part No. mm qty
4 100 4MG304GLN 5 100 5MG304GLN 6 100 6MG304GLN 8 100 8MG304GLN 10 100 10MG304GLN 12 50 12MG304GLN 16 25 16MG304GLN 20 25 20MG304GLN
Hexagon Weld Nuts
GRADE 304 METRIC HEXAGON WELD NUTS
Dia. Pack Part No. mm qty
3 100 3MG304WEN 4 100 4MG304WEN 5 100 5MG304WEN 6 100 6MG304WEN 8 100 8MG304WEN
ONLINE CATALOGUEVisit www.coventryfasteners.com.au to view current list prices for all products in our Stainless Steel, Industrial and Construction Fasteners catalogues. Current list prices at the click of a button – it’s just another way we’re making your job easier.
FLAT ROUND WASHERS/MUDGUARD WASHERS/SPRING WASHERS SINGLE COITOOTH LOCK WASHERS/SERRATED TOOTH LOCK WASHERS/BELLEVILLWASHERS/CRINKLE WASHERS/CURVED WASHERS/CUP WASHERS/NORDLOCK WASHERS/FLAT ROUND WASHERS/MUDGUARD WASHERS/SPRINWASHERS SINGLE COIL/TOOTH LOCK WASHERS/SERRATED TOOTH LOCWASHERS/BELLEVILLE WASHERS/CRINKLE WASHERS/CURVED WASHERS/CUWASHERS/NORD-LOCK WASHERS/FLAT ROUND WASHERS/MUDGUARWASHERS/SPRING WASHERS SINGLE COIL/TOOTH LOCK WASHERS/SERRATETOOTH LOCK WASHERS/BELLEVILLE WASHERS/CRINKLE WASHERS/SPRIN
39
WASHERS
WA
SHER
S
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
40 AUSTRALIA’S FASTENER SPECIALISTS
BRANCHES AUSTRALIA WIDEWHY WE STOCK IT
Contact your local Coventry Fasteners branch for more information on this product (see back of catalogue for your nearest branch).
NORD-LOCK’s unique bolt securing system consists of a pair of washers with a wedge-locking action that uses tension to make the bolt self-locking. Used together with a standard nut, NORD-LOCK achieves a locking that is superior to other locking hardware, especially under vibration or dynamic loads. In heavy industrial applications we recommend NORD-LOCK as a reliable and effective solution. NORD-LOCK washers are available through our national network of stores. Innovative products – just another way we’re making your job easier.
NORD-LOCK washers secure nuts and bolts better than any other self-locking system.
1. NORD-LOCK can be used with bolts in tapped holes.
2. NORD-LOCK can also be used in counter-bored holes.
3. Through holes require two pairs of NORD-LOCK washers. Keep the bolt secured when tightening the nut.
4. For slotted holes or on soft material, use a flanged nut/bolt together with NORD-LOCK “sp” (washers with enlarged outer diameter).
WANT TO KNOW MORE?
WA
SHERS
41AUSTRALIA’S FASTENER SPECIALISTS
BRANCHES AUSTRALIA WIDE
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
Flat Round Washers
GRADE 304 IMPERIAL FLAT ROUND WASHERS
I.D O.D Thick Pack Part No. inch inch gauge qty
¹⁄₈ ⁵⁄₁₆ 22 200 18X516G304W ¹⁄₈ ³⁄₈ 20 200 18X38G304W ⁵⁄₃₂ ³⁄₈ 20 200 532X38G304W ⁵⁄₃₂ ⁷⁄₁₆ 20 200 532X716G304W ³⁄₁₆ ⁷⁄₁₆ 20 200 316X716G304W ³⁄₁₆ ¹⁄₂ 20 100 316X12G304W ³⁄₁₆ ³⁄₄ 18 100 316X34G304W ³⁄₁₆ ⁷⁄₈ 18 100 316X78G304W ³⁄₁₆ 1 16 100 316X1G304W ³⁄₁₆ 1 ¹⁄₄ 16 100 316X1.14G304W ¹⁄₄ ¹⁄₂ 20 100 14X12G304W ¹⁄₄ ⁹⁄₁₆ 18 100 14X916G304W ¹⁄₄ ⁵⁄₈ 18 100 14X58G304W ¹⁄₄ ³⁄₄ 18 100 14X34G304W ¹⁄₄ 1 16 100 14X1G304W ¹⁄₄ 1 ¹⁄₄ 16 100 14X1.14G304W ⁵⁄₁₆ ⁵⁄₈ 18 100 516X58G304W ⁵⁄₁₆ ³⁄₄ 18 100 516X34G304W ⁵⁄₁₆ 1 16 100 516X1G304W ⁵⁄₁₆ 1 ¹⁄₄ 16 100 516X1.14G304W ³⁄₈ ³⁄₄ 18 100 38X34G304W ³⁄₈ 1 16 100 38X1G304W ³⁄₈ 1 ¹⁄₄ 16 100 38X1.14G304W ³⁄₈ 1 ¹⁄₂ 14 100 38X1.12G304W ¹⁄₂ 1 16 100 12X1G304W ¹⁄₂ 1 ¹⁄₄ 14 100 12X1.14G304W ¹⁄₂ 2 14 50 12X2G304W ⁵⁄₈ 1 ¹⁄₄ 16 100 58X1.14G304W ⁵⁄₈ 1 ¹⁄₂ 14 100 58X1.12G304W ³⁄₄ 1 ¹⁄₂ 14 100 34X1.12G304W ³⁄₄ 1 ⁷⁄₈ 12 100 34X1.78G304W ⁷⁄₈ 1 ⁵⁄₈ 14 50 78X1.58G304W ⁷⁄₈ 2 12 50 78X2G304W 1 1 ⁷⁄₈ 12 50 1X1.78G304W 1 2 10 50 1X2G304W 1 2 ¹⁄₂ 10 50 1X2.12G304W
GRADE 316 IMPERIAL FLAT ROUND WASHERS
I.D O.D Thick Pack Part No. inch inch gauge qty
³⁄₁₆ ⁷⁄₁₆ 20 200 316X716G316W ³⁄₁₆ ¹⁄₂ 20 100 316X12G316W ³⁄₁₆ ³⁄₄ 18 100 316X34G316W ³⁄₁₆ ⁷⁄₈ 18 100 316X78G316W
continued…
GRADE 316 IMPERIAL FLAT ROUND WASHERS continued…
I.D O.D Thick Pack Part No. inch inch gauge qty
³⁄₁₆ 1 16 100 316X1G316W ³⁄₁₆ 1 ¹⁄₄ 16 100 316X1.14G316W ¹⁄₄ ¹⁄₂ 20 100 14X12G316W ¹⁄₄ ⁹⁄₁₆ 18 100 14X916G316W ¹⁄₄ ⁵⁄₈ 18 100 14X58G316W ¹⁄₄ ³⁄₄ 18 100 14X34G316W ¹⁄₄ ⁷⁄₈ 18 100 14X78G316W ¹⁄₄ 1 16 100 14X1G316W ¹⁄₄ 1 ¹⁄₄ 16 100 14X1.14G316W ⁵⁄₁₆ ⁵⁄₈ 18 100 516X58G316W ⁵⁄₁₆ ³⁄₄ 18 100 516X34G316W ⁵⁄₁₆ 1 16 100 516X1G316W ⁵⁄₁₆ 1 ¹⁄₄ 16 100 516X1.14G316W ³⁄₈ ³⁄₄ 18 100 38X34G316W ³⁄₈ ⁷⁄₈ 18 100 38X78G316W ³⁄₈ 1 16 100 38X1G316W ³⁄₈ 1 ¹⁄₄ 16 100 38X1.14G316W ³⁄₈ 1 ¹⁄₂ 14 100 38X1.12G316W ³⁄₈ 2 3mm 50 38X2X3G316W ⁷⁄₁₆ 1 ¹⁄₈ 16 100 716X1.18G316W ¹⁄₂ 1 16 100 12X1G316W ¹⁄₂ 1 ¹⁄₄ 14 100 12X1.14G316W ¹⁄₂ 2 14 50 12X2G316W ⁹⁄₁₆ 1 ¹⁄₄ 14 100 916X1.14G316W ⁵⁄₈ 1 ¹⁄₄ 16 100 58X1.14G316W ⁵⁄₈ 1 ¹⁄₂ 14 100 58X1.12G316W ³⁄₄ 1 ¹⁄₂ 14 100 34X1.12G316W ³⁄₄ 1 ⁷⁄₈ 12 100 34X1.78G316W ⁷⁄₈ 1 ⁵⁄₈ 14 50 78X1.58G316W ⁷⁄₈ 2 12 50 78X2G316W 1 1 ⁷⁄₈ 14 50 1X1.78G316W 1 2 ¹⁄₂ 10 50 1X2.12G316W 1 ¹⁄₈ 2 ¹⁄₂ 10 20 1.18X2.12G316W 1 ¹⁄₄ 2 ³⁄₄ 10 20 1.14X2.34G316W 1 ¹⁄₂ 3 ¹⁄₄ 10 10 1.12X3.14G316W 2 3 ³⁄₄ 4mm 10 2X3.34X4G316W
GRADE 304 METRIC FLAT ROUND WASHERS DIN STANDARD
I.D O.D Thick Pack Part No. mm mm mm qty
5 10 1 200 5X10X1MG304DINW 6 12.5 1.6 100 6X12.5X1.6MG304DINW 8 17 1.6 100 8X17X1.6MG304DINW 10 21 2 100 10X21X2MG304DINW 12 24 2.5 100 12X24X2.5MG304DINW 16 30 3 100 16X30X3MG304DINW 20 37 3 100 20X37X3MG304DINW
GRADE 304 METRIC FLAT ROUND WASHERS
I.D O.D Thick Pack Part No. mm mm mm qty
3 7 0.5 200 3MG304W 4 9 0.8 200 4MG304W 5 10 0.8 200 5MG304W
continued…
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
42 AUSTRALIA’S FASTENER SPECIALISTS
SPECIALIST ADVICEGRADE 304 METRIC FLAT ROUND WASHERS continued…
I.D O.D Thick Pack Part No. mm mm mm qty
6 12.5 1.2 100 6MG304W 8 17 1.2 100 8MG304W 10 21 1.2 100 10MG304W 12 24 1.5 100 12MG304W 14 28 1.5 100 14MG304W 16 30 1.5 100 16MG304W 20 37 2 100 20MG304W 22 39 2.5 50 22MG304W 24 44 3 50 24MG304W 30 56 3 20 30MG304W
GRADE 316 METRIC FLAT ROUND WASHERS
I.D O.D Thick Pack Part No. mm mm mm qty
6 12.5 1.2 100 6MG316W 8 17 1.2 100 8MG316W 10 21 1.2 100 10MG316W 12 24 1.5 100 12MG316W 14 28 1.5 100 14MG316W 16 30 1.5 100 16MG316W 20 37 2 100 20MG316W 22 39 2.5 100 22MG316W 24 44 3 50 24MG316W 27 50 3 25 27MG316W 30 56 3 20 30MG316W 33 60 3 20 33MG316W 36 66 5 10 36MG316W 42 78 5 10 42MG316W 48 92 5 10 48MG316W
GRADE 316 METRIC FLAT ROUND WASHERS DIN STANDARD
I.D O.D Thick Pack Part No. mm mm mm qty
2 5 0.3 200 2X5X0.3MG316DINW 2.5 6 0.5 200 2.5X6X0.5MG316DINW 3 7 0.5 200 3X7X0.5MG316DINW 4 9 0.8 200 4X9X0.8MG316DINW 5 10 1 200 5X10X1MG316DINW 6 12.5 1.6 100 6X12.5X1.6MG316DINW 8 17 1.6 100 8X17X1.6MG316DINW 10 21 2 100 10X21X2MG316DINW 12 24 2.5 100 12X24X2.5MG316DINW 14 28 2.5 100 14X28X2.5MG316DINW 16 30 3 100 16X30X3MG316DINW 18 34 3 100 18X34X3MG316DINW 20 37 3 100 20X37X3MG316DINW 22 39 3 100 22X39X3MG316DINW 24 44 4 50 24X44X4MG316DINW 39 72 6 10 39X72X6MG316DINW
FASTER ORDERINGDon’t forget to quote the part number when ordering. Quick and efficient ordering is another way we’re making your job easier.Turn to back cover for your nearest branch.
WA
SHER
S
We understand there is more to supplying fasteners than just delivering boxes. Our aim is to offer customers across Australia the most professional fastener supply service
possible. Often fasteners make up only a small but important component of our customers’ requirements, so we keep the process of order and supply simple. Our friendly and professional service means you have one less problem to worry about.
visit us at www.coventryfasteners.com.au
Professional service with a smile
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
WA
SHERS
43AUSTRALIA’S FASTENER SPECIALISTS
SPECIALIST ADVICEGRADE 316 METRIC SPRING WASHERS SINGLE COIL
I.D Pack Part No. mm qty
2 200 2MG316SW 2.5 200 2.5MG316SW 3 200 3MG316SW 4 200 4MG316SW 5 200 5MG316SW 6 100 6MG316SW 8 100 8MG316SW 10 100 10MG316SW 12 100 12MG316SW 14 100 14MG316SW 16 100 16MG316SW 18 100 18MG316SW 20 100 20MG316SW 24 50 24MG316SW 27 25 27MG316SW 30 25 30MG316SW 36 10 36MG316SW
GRADE 304 MEDIUM SECTION SPRING WASHERS SINGLE COIL
I.D Pack Part No. inch qty
2G 200 2GG304SW 4G 200 4GG304SW ¹⁄₈ 200 18G304SW ⁵⁄₃₂ 200 532G304SW ³⁄₁₆ 200 316G304SW ¹⁄₄ 100 14G304SW ⁵⁄₁₆ 100 516G304SW ³⁄₈ 100 38G304SW ¹⁄₂ 100 12G304SW ⁹⁄₁₆ 100 916G304SW ⁵⁄₈ 100 58G304SW ³⁄₄ 100 34G304SW ⁷⁄₈ 50 78G304SW 1 50 1G304SW
GRADE 316 MEDIUM SECTION SPRING WASHERS SINGLE COIL
I.D Pack Part No. inch qty
¹⁄₈ 200 18G316SW ⁵⁄₃₂ 200 532G316SW ³⁄₁₆ 200 316G316SW ¹⁄₄ 100 14G316SW ⁵⁄₁₆ 100 516G316SW ³⁄₈ 100 38G316SW ⁷⁄₁₆ 100 716G316SW ¹⁄₂ 100 12G316SW ⁹⁄₁₆ 100 916G316SW ⁵⁄₈ 100 58G316SW ³⁄₄ 100 34G316SW ⁷⁄₈ 50 78G316SW 1 50 1G316SW 1 ¹⁄₈ 25 1.18G316SW 1 ¹⁄₄ 25 1.14G316SW 1 ¹⁄₂ 10 1.12G316SW
Mudguard Washers
GRADE 304 METRIC MUDGUARD WASHERS DIN STANDARD
I.D O.D Thick Pack Part No. mm mm mm qty
5 15 1.2 100 5X15X1.2MG304DINW 6 18 1.6 100 6X18X1.6MG304DINW 8 24 2 100 8X24X2MG304DINW 10 30 2.5 100 10X30X2.5MG304DINW 12 37 3 100 12X37X3MG304DINW 16 50 3 50 16X50X3MG304DINW 20 60 4 50 20X60X4MG304DINW
GRADE 316 METRIC MUDGUARD WASHERS DIN STANDARD
I.D O.D Thick Pack Part No. mm mm mm qty
5 15 1.2 100 5X15X1.2MG316DINW 6 18 1.6 100 6X18X1.6MG316DINW 8 24 2 100 8X24X2MG316DINW 12 37 3 100 12X37X3MG316DINW
Spring Washers Single Coil
GRADE 304 METRIC SPRING WASHERS SINGLE COIL
I.D Pack Part No. mm qty
2 200 2MG304SW 2.5 200 2.5MG304SW 3 200 3MG304SW 4 200 4MG304SW 5 200 5MG304SW 6 100 6MG304SW 8 100 8MG304SW 10 100 10MG304SW 12 100 12MG304SW 16 100 16MG304SW 20 100 20MG304SW
We understand the importance of supply continuity in any industry, which is why we make it our priority to deliver the fasteners you need, when you need them. With a computer linked network of 47 branches, we have a huge range and extensive stock holdings of fastener products. You can be confident that if you need the correct fasteners delivered on-time and in-full we will perform.
visit us at www.coventryfasteners.com.au
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCH TURN TO BACK COVER FOR YOUR NEAREST BRANCH
Fast and efficient on site delivery
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
WA
SHERS
45AUSTRALIA’S FASTENER SPECIALISTS
FAST DELIVERYTooth Lock Washers
GRADE 304 INTERNAL TOOTH LOCK WASHERS
I.D O.D Thick Pack Part No. mm mm mm qty
2.5 5.5 0.4 500 2.5MG304ITW 3 6 0.4 500 3MG304ITW 4 8 0.5 500 4MG304ITW 5 10 0.6 200 5MG304ITW 6 11 0.7 200 6MG304ITW 8 15 0.8 200 8MG304ITW 10 18 0.9 200 10MG304ITW 12 20.5 1.0 100 12MG304ITW 16 26 1.2 100 16MG304ITW 20 33 1.4 100 20MG304ITW
GRADE 304 EXTERNAL TOOTH LOCK WASHERS
I.D O.D Thick Pack Part No. mm mm mm qty
3 6 0.4 500 3MG304ETW 4 8 0.5 500 4MG304ETW 5 10 0.6 500 5MG304ETW 6 11 0.7 200 6MG304ETW 8 15 0.8 200 8MG304ETW 10 18 0.9 200 10MG304ETW 12 20.5 1.0 100 12MG304ETW 16 26 1.2 100 16MG304ETW
Serrated Tooth Lock Washers
GRADE 304 INTERNAL SERRATED TOOTH LOCK WASHERS
I.D O.D Thick Pack Part No. mm mm mm qty
5 10 0.6 200 5MG304ISW 6 11 0.7 200 6MG304ISW 8 15 0.8 200 8MG304ISW 10 18 0.9 200 10MG304ISW
GRADE 304 EXTERNAL SERRATED TOOTH LOCK WASHERS
I.D O.D Thick Pack Part No. mm mm mm qty
4 8 0.5 500 4MG304ESW 6 11 0.7 200 6MG304ESW 10 18 0.9 200 10MG304ESW 12 20.5 1.0 100 12MG304ESW
GRADE 316 EXTERNAL SERRATED TOOTH LOCK WASHERS
I.D O.D Thick Pack Part No. mm mm mm qty
5 10.0 0.6 200 5MG316ESW 6 11.0 0.7 200 6MG316ESW 8 15.0 0.8 200 8MG316ESW 10 18.0 0.9 200 10MG316ESW 12 20.5 1.0 100 12MG316ESW 16 26.0 1.2 100 16MG316ESW
Belleville Washers
GRADE 304 BELLEVILLE WASHERS
Dia. Pack Part No. mm qty
4 100 4MG304BW 5 100 5MG304BW 6 100 6MG304BW 8 100 8MG304BW 10 100 10MG304BW 12 100 12MG304BW 16 100 16MG304BW 20 100 20MG304BW
Crinkle Washers
GRADE 304 CRINKLE WASHERS
Dia. Pack Part No. mm qty
2 100 2MG304CRW
continued…
WA
SHER
S46 AUSTRALIA’S FASTENER SPECIALISTS
FRIENDLY SERVICE
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
NORD-LOCK Washers
GRADE 316 NORD-LOCK WASHERS
Dia. O.D Pairs Part No. mm mm per box
3 7.0 200 NL3SS 3.5 7.6 200 NL3.5SS 4 7.6 200 NL4SS 5 9.0 200 NL5SS 6 10.8 200 NL6SS ¹⁄₄ inch 11.5 200 NL1/4SS 8 13.5 200 NL8SS ³⁄₈ inch 16.6 200 NL3/8SS 10 16.6 200 NL10SS 11 18.5 200 NL11SS 12 19.5 200 NL12SS ¹⁄₂ inch 19.5 200 NL1/2SS 14 23.0 100 NL14SS 16 25.4 100 NL16SS 18 29.0 100 NL18SS ³⁄₄ inch 30.7 100 NL3/4SS 20 30.7 100 NL20SS 22 34.5 100 NL22SS 24 39.0 100 NL24SS 1 inch 39.0 100 NL1”SS 27 42.0 50 NL27SS T27 42.0 50 NL27SST 30 47.0 50 NL30SS T30 47.0 50 NL30SST T33 48.5 25 NL33SST T36 55.0 25 NL36SST T39 58.5 25 NL39SST T42 63.0 25 NL42SST
GRADE 316 NORD-LOCK WASHERS WITH ENLARGED OUTER DIAMETER
Dia. O.D Pairs Part No. mm mm per box
3.5 9.0 200 NL3.5SSSP 4 9.0 200 NL4SSSP 5 10.8 200 NL5SSSP 6 13.5 200 NL6SSSP ¹⁄₄ inch 13.5 200 NL1/4"SSSP 8 16.6 200 NL8SSSP ³⁄₈ inch 21.0 200 NL3/8"SSSP 10 21.0 200 NL10SSSP 14 30.7 100 NL14SSSP 16 30.7 100 NL16SSSP 18 34.5 100 NL18SSSP ³⁄₄ inch 39.0 100 NL3/4"SSSP 20 39.0 100 NL20SSSP
GRADE 304 CRINKLE WASHERS continued…
Dia. Pack Part No. mm qty
2.5 100 2.5MG304CRW 3 100 3MG304CRW 4 100 4MG304CRW 5 100 5MG304CRW 6 100 6MG304CRW 8 100 8MG304CRW 10 100 10MG304CRW
Curved Washers
GRADE 304 CURVED WASHERS
Dia. Pack Part No. mm qty
3 100 3MG304CUW 4 100 4MG304CUW 5 200 5MG304CUW 6 100 6MG304CUW
Cup Washers
GRADE 304 CUP WASHERS
Dia. Pack Part No. qty
6G 200 6G304CW 8G 200 8G304CW 10G 200 10G304CW 12G 200 12G304CW 14G 200 14G304CW
LOCAL BRANCHESWith Australia’s largest network of local specialised fastener branches there’s a Coventry Fasteners branch near you. Local branches is another way we’re making your job easier.Turn to back cover for your nearest branch.
T = thickness 6.6 - 6.8mm with inner chamfer
FLAT HEAD SOCKET SCREWS/SOCKET HEAD CAP SCREWS/BUTTON HEASOCKET SCREWS/HEXAGON SOCKET SET SCREWS/FLAT HEAD SOCKESCREWS/FLAT HEAD SOCKET SCREWS/SOCKET HEAD CAP SCREWS/BUTTOHEAD SOCKET SCREWS/HEXAGON SOCKET SET SCREWS/FLAT HEAD SOCKESCREWS/FLAT HEAD SOCKET SCREWS/SOCKET HEAD CAP SCREWS/BUTTOHEAD SOCKET SCREWS/HEXAGON SOCKET SET SCREWS/FLAT HEAD SOCKESCREWS/FLAT HEAD SOCKET SCREWS/SOCKET HEAD CAP SCREWS/BUTTOHEAD SOCKET SCREWS/HEXAGON SOCKET SET SCREWS/FLAT HEAD SOCKESCREWS/FLAT HEAD SOCKET SCREWS/SOCKET HEAD CAP SCREWS/BUTTO
47
SOCKET HEAD FASTENERS
SOCK
ET H
EAD
FA
STEN
ERS
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
48 AUSTRALIA’S FASTENER SPECIALISTS
HUGE RANGE
WANT TO KNOW MORE?Contact your local Coventry Fasteners branch for more information on this product (see back of catalogue for your nearest branch).
WHY WE STOCK IT
James Glen has established itself as the market leader of stainless steel fasteners in Australia and New Zealand. Which is why James Glen is the stainless steel fastener we recommend to our customers. Every product is manufactured to the same high standard of quality you would expect from this well known brand. For more information about James Glen, including product training and technical manuals, visit www.jamesglen.com.au. Supplying the products you know and trust - just another way we’re making your job easier.
Since 1964, James Glen has been the one stainless steel fastener brand Australian industry can rely on.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SOCKET H
EAD
FASTEN
ERS49AUSTRALIA’S FASTENER SPECIALISTS
HUGE RANGEGRADE 304 FLAT HEAD SOCKET SCREWS continued…
Dia. Length Pack Part No. mm mm qty
10 30 50 10X30MG304FHSS 10 35 50 10X35MG304FHSS 10 40 50 10X40MG304FHSS 10 50 50 10X50MG304FHSS 10 70 50 10X70MG304FHSS 12 20 25 12X20MG304FHSS 12 25 25 12X25MG304FHSS 12 30 25 12X30MG304FHSS 12 40 25 12X40MG304FHSS 12 50 25 12X50MG304FHSS 12 60 25 12X60MG304FHSS
GRADE 316 FLAT HEAD SOCKET SCREWS
Dia. Length Pack Part No. mm mm qty
3 6 100 3X6MG316FHSS 3 8 100 3X8MG316FHSS 3 10 100 3X10MG316FHSS 3 12 100 3X12MG316FHSS 3 16 100 3X16MG316FHSS 3 25 100 3X25MG316FHSS 4 6 100 4X6MG316FHSS 4 8 100 4X8MG316FHSS 4 10 100 4X10MG316FHSS 4 12 100 4X12MG316FHSS 4 16 100 4X16MG316FHSS 4 20 100 4X20MG316FHSS 4 25 100 4X25MG316FHSS 5 10 100 5X10MG316FHSS 5 12 100 5X12MG316FHSS 5 16 100 5X16MG316FHSS 5 20 100 5X20MG316FHSS 5 25 100 5X25MG316FHSS 5 30 100 5X30MG316FHSS 5 35 100 5X35MG316FHSS 6 10 100 6X10MG316FHSS 6 12 100 6X12MG316FHSS 6 16 100 6X16MG316FHSS 6 20 100 6X20MG316FHSS 6 25 100 6X25MG316FHSS 6 30 100 6X30MG316FHSS 6 35 100 6X35MG316FHSS 6 40 100 6X40MG316FHSS 6 50 100 6X50MG316FHSS 6 60 50 6X60MG316FHSS 6 70 50 6X70MG316FHSS 6 80 50 6X80MG316FHSS 8 12 100 8X12MG316FHSS
continued…
Flat Head Socket Screws
GRADE 304 FLAT HEAD SOCKET SCREWS
Dia. Length Pack Part No. mm mm qty
3 5 100 3X5MG304FHSS 3 6 100 3X6MG304FHSS 3 8 100 3X8MG304FHSS 3 10 100 3X10MG304FHSS 3 12 100 3X12MG304FHSS 3 16 100 3X16MG304FHSS 3 20 100 3X20MG304FHSS 4 8 100 4X8MG304FHSS 4 10 100 4X10MG304FHSS 4 12 100 4X12MG304FHSS 4 16 100 4X16MG304FHSS 4 20 100 4X20MG304FHSS 4 25 100 4X25MG304FHSS 4 40 100 4X40MG304FHSS 5 10 100 5X10MG304FHSS 5 12 100 5X12MG304FHSS 5 16 100 5X16MG304FHSS 5 20 100 5X20MG304FHSS 5 25 100 5X25MG304FHSS 5 30 100 5X30MG304FHSS 5 35 100 5X35MG304FHSS 5 40 100 5X40MG304FHSS 5 50 100 5X50MG304FHSS 6 10 100 6X10MG304FHSS 6 12 100 6X12MG304FHSS 6 16 100 6X16MG304FHSS 6 20 100 6X20MG304FHSS 6 25 100 6X25MG304FHSS 6 30 100 6X30MG304FHSS 6 35 100 6X35MG304FHSS 6 40 100 6X40MG304FHSS 6 50 100 6X50MG304FHSS 8 16 100 8X16MG304FHSS 8 20 100 8X20MG304FHSS 8 25 100 8X25MG304FHSS 8 30 100 8X30MG304FHSS 8 35 100 8X35MG304FHSS 8 40 100 8X40MG304FHSS 8 45 100 8X45MG304FHSS 8 50 100 8X50MG304FHSS 10 16 50 10X16MG304FHSS 10 20 50 10X20MG304FHSS 10 25 50 10X25MG304FHSS
continued…
GET TO KNOW USCoventry Fasteners is part of the publicly listed Australian company Coventry Group Ltd with a proud history of servicing mining, construction and manufacturing industries. Find out more at www.coventryfasteners.com.au
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SOCK
ET H
EAD
FA
STEN
ERS
50 AUSTRALIA’S FASTENER SPECIALISTS
BEST VALUEGRADE 304 UNC FLAT HEAD SOCKET SCREWS
Dia. Length Pack Part No. inch inch qty
4-40 ¹⁄₄ 100 4-40X14NCG304FHSS 4-40 ³⁄₈ 100 4-40X38NCG304FHSS 6-32 ³⁄₈ 100 6-32X38NCG304FHSS 6-32 ¹⁄₂ 100 6-32X12NCG304FHSS 8-32 ³⁄₄ 100 8-32X34NCG304FHSS 10-24 ³⁄₈ 100 10-24X38NCG304FHSS 10-24 ¹⁄₂ 100 10-24X12NCG304FHSS 10-24 ⁵⁄₈ 100 10-24X58NCG304FHSS 10-24 ³⁄₄ 100 10-24X34NCG304FHSS 10-24 1 100 10-24X1NCG304FHSS ¹⁄₄ ³⁄₈ 100 14X38NCG304FHSS ¹⁄₄ ¹⁄₂ 100 14X12NCG304FHSS ¹⁄₄ ⁵⁄₈ 100 14X58NCG304FHSS ¹⁄₄ ³⁄₄ 100 14X34NCG304FHSS ¹⁄₄ 1 100 14X1NCG304FHSS ¹⁄₄ 1 ¹⁄₄ 100 14X1.14NCG304FHSS ¹⁄₄ 1 ¹⁄₂ 100 14X1.12NCG304FHSS ¹⁄₄ 2 100 14X2NCG304FHSS ⁵⁄₁₆ ³⁄₄ 100 516X34NCG304FHSS ⁵⁄₁₆ 1 100 516X1NCG304FHSS ⁵⁄₁₆ 1 ¹⁄₄ 100 516X1.14NCG304FHSS ⁵⁄₁₆ 1 ¹⁄₂ 100 516X1.12NCG304FHSS ⁵⁄₁₆ 2 100 516X2NCG304FHSS ³⁄₈ ³⁄₄ 100 38X34NCG304FHSS ³⁄₈ 1 100 38X1NCG304FHSS ³⁄₈ 1 ¹⁄₄ 100 38X1.14NCG304FHSS ³⁄₈ 1 ¹⁄₂ 100 38X1.12NCG304FHSS ³⁄₈ 2 100 38X2NCG304FHSS ¹⁄₂ 1 ¹⁄₂ 25 12X1.12NCG304FHSS ¹⁄₂ 2 25 12X2NCG304FHSS
GRADE 304 UNF FLAT HEAD SOCKET SCREWS
Dia. Length Pack Part No. inch inch qty
10-32 ³⁄₈ 100 10-32X38NFG304FHSS 10-32 ¹⁄₂ 100 10-32X12NFG304FHSS 10-32 ⁵⁄₈ 100 10-32X58NFG304FHSS 10-32 ³⁄₄ 100 10-32X34NFG304FHSS 10-32 1 100 10-32X1NFG304FHSS ¹⁄₄ ¹⁄₂ 100 14X12NFG304FHSS ¹⁄₄ ⁵⁄₈ 100 14X58NFG304FHSS ¹⁄₄ ³⁄₄ 100 14X34NFG304FHSS ¹⁄₄ 1 100 14X1NFG304FHSS ⁵⁄₁₆ ³⁄₄ 50 516X34NFG304FHSS ⁵⁄₁₆ 1 50 516X1NFG304FHSS ⁵⁄₁₆ 1 ¹⁄₄ 50 516X1.14NFG304FHSS ⁵⁄₁₆ 1 ¹⁄₂ 50 516X1.12NFG304FHSS ⁵⁄₁₆ 2 50 516X2NFG304FHSS ³⁄₈ 1 50 38X1NFG304FHSS ³⁄₈ 1 ¹⁄₄ 50 38X1.14NFG304FHSS ³⁄₈ 1 ¹⁄₂ 50 38X1.12NFG304FHSS ³⁄₈ 2 50 38X2NFG304FHSS
GRADE 316 FLAT HEAD SOCKET SCREWS continued…
Dia. Length Pack Part No. mm mm qty
8 16 100 8X16MG316FHSS 8 20 100 8X20MG316FHSS 8 25 100 8X25MG316FHSS 8 30 100 8X30MG316FHSS 8 35 100 8X35MG316FHSS 8 40 100 8X40MG316FHSS 8 50 100 8X50MG316FHSS 8 55 50 8X55MG316FHSS 8 60 50 8X60MG316FHSS 8 70 50 8X70MG316FHSS 10 20 100 10X20MG316FHSS 10 25 100 10X25MG316FHSS 10 30 100 10X30MG316FHSS 10 35 100 10X35MG316FHSS 10 40 50 10X40MG316FHSS 10 50 50 10X50MG316FHSS 10 60 50 10X60MG316FHSS 10 70 50 10X70MG316FHSS 10 80 50 10X80MG316FHSS 10 100 50 10X100MG316FHSS 10 120 25 10X120MG316FHSS 12 20 25 12X20MG316FHSS 12 25 25 12X25MG316FHSS 12 30 25 12X30MG316FHSS 12 35 25 12X35MG316FHSS 12 40 25 12X40MG316FHSS 12 50 25 12X50MG316FHSS 12 60 25 12X60MG316FHSS 12 70 25 12X70MG316FHSS 12 80 25 12X80MG316FHSS 12 90 25 12X90MG316FHSS 12 100 25 12X100MG316FHSS 16 30 25 16X30MG316FHSS 16 35 25 16X35MG316FHSS 16 40 25 16X40MG316FHSS 16 45 25 16X45MG316FHSS 16 50 25 16X50MG316FHSS 16 60 25 16X60MG316FHSS 16 70 25 16X70MG316FHSS 16 80 25 16X80MG316FHSS 16 90 25 16X90MG316FHSS 16 100 25 16X100MG316FHSS 16 120 10 16X120MG316FHSS 20 40 10 20X40MG316FHSS 20 50 10 20X50MG316FHSS 20 60 10 20X60MG316FHSS 20 70 10 20X70MG316FHSS 20 80 10 20X80MG316FHSS 20 90 10 20X90MG316FHSS 20 100 10 20X100MG316FHSS
CAN’T FIND IT?Can’t find what you’re looking for? The friendly team at your local Coventry Fasteners branch can help. Personal service is another way we’re making your job easier.Turn to back cover for your nearest branch.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SOCKET H
EAD
FASTEN
ERS51AUSTRALIA’S FASTENER SPECIALISTS
BEST VALUESocket Head Cap Screws
GRADE 304 METRIC SOCKET HEAD CAP SCREWS
Dia. Length Pack Part No. mm mm qty
3 4 100 3X4MG304SHCS 3 6 100 3X6MG304SHCS 3 8 100 3X8MG304SHCS 3 10 100 3X10MG304SHCS 3 12 100 3X12MG304SHCS 3 16 100 3X16MG304SHCS 3 20 100 3X20MG304SHCS 3 25 100 3X25MG304SHCS 3 30 100 3X30MG304SHCS 3 35 100 3X35MG304SHCS 3 40 100 3X40MG304SHCS 4 6 100 4X6MG304SHCS 4 8 100 4X8MG304SHCS 4 10 100 4X10MG304SHCS 4 12 100 4X12MG304SHCS 4 16 100 4X16MG304SHCS 4 20 100 4X20MG304SHCS 4 25 100 4X25MG304SHCS 4 30 100 4X30MG304SHCS 4 35 100 4X35MG304SHCS 4 40 100 4X40MG304SHCS 4 45 100 4X45MG304SHCS 4 50 100 4X50MG304SHCS 5 6 100 5X6MG304SHCS 5 8 100 5X8MG304SHCS 5 10 100 5X10MG304SHCS 5 12 100 5X12MG304SHCS 5 16 100 5X16MG304SHCS 5 20 100 5X20MG304SHCS 5 25 100 5X25MG304SHCS 5 30 100 5X30MG304SHCS 5 35 100 5X35MG304SHCS 5 40 100 5X40MG304SHCS 5 45 100 5X45MG304SHCS 5 50 100 5X50MG304SHCS 6 8 100 6X8MG304SHCS 6 10 100 6X10MG304SHCS 6 12 100 6X12MG304SHCS 6 16 100 6X16MG304SHCS 6 20 100 6X20MG304SHCS 6 25 100 6X25MG304SHCS 6 30 100 6X30MG304SHCS 6 35 100 6X35MG304SHCS 6 40 100 6X40MG304SHCS
continued…
GRADE 304 METRIC SOCKET HEAD CAP SCREWS continued…
Dia. Length Pack Part No. mm mm qty
6 45 100 6X45MG304SHCS 6 50 100 6X50MG304SHCS 6 60 50 6X60MG304SHCS 6 70 50 6X70MG304SHCS 6 75 50 6X75MG304SHCS 8 10 100 8X10MG304SHCS 8 12 100 8X12MG304SHCS 8 16 100 8X16MG304SHCS 8 20 100 8X20MG304SHCS 8 25 100 8X25MG304SHCS 8 30 100 8X30MG304SHCS 8 35 100 8X35MG304SHCS 8 40 100 8X40MG304SHCS 8 45 100 8X45MG304SHCS 8 50 100 8X50MG304SHCS 8 60 50 8X60MG304SHCS 8 70 50 8X70MG304SHCS 8 80 50 8X80MG304SHCS 8 110 50 8X110MG304SHCS 10 16 100 10X16MG304SHCS 10 20 100 10X20MG304SHCS 10 25 100 10X25MG304SHCS 10 30 100 10X30MG304SHCS 10 35 100 10X35MG304SHCS 10 40 100 10X40MG304SHCS 10 45 100 10X45MG304SHCS 10 50 100 10X50MG304SHCS 10 55 50 10X55MG304SHCS 10 60 50 10X60MG304SHCS 10 70 50 10X70MG304SHCS 10 80 50 10X80MG304SHCS 10 90 50 10X90MG304SHCS 10 120 50 10X120MG304SHCS 10 140 50 10X140MG304SHCS 12 20 50 12X20MG304SHCS 12 25 50 12X25MG304SHCS 12 30 50 12X30MG304SHCS 12 35 50 12X35MG304SHCS 12 40 50 12X40MG304SHCS 12 45 50 12X45MG304SHCS 12 50 50 12X50MG304SHCS 12 60 25 12X60MG304SHCS 12 70 25 12X70MG304SHCS 12 80 25 12X80MG304SHCS 12 90 25 12X90MG304SHCS 16 25 25 16X25MG304SHCS 16 30 25 16X30MG304SHCS 16 35 25 16X35MG304SHCS 16 40 25 16X40MG304SHCS 16 45 25 16X45MG304SHCS 16 50 25 16X50MG304SHCS
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SOCK
ET H
EAD
FA
STEN
ERS
52 AUSTRALIA’S FASTENER SPECIALISTS
BRANCHES AUSTRALIA WIDEGRADE 316 METRIC SOCKET HEAD CAP SCREWS
Dia. Length Pack Part No. mm mm qty
2 4 100 2X4MG316SHCS 2 5 100 2X5MG316SHCS 2 6 100 2X6MG316SHCS 2 8 100 2X8MG316SHCS 2 10 100 2X10MG316SHCS 2 12 100 2X12MG316SHCS 2 16 100 2X16MG316SHCS 2 20 100 2X20MG316SHCS 2.5 5 100 2.5X5MG316SHCS 2.5 6 100 2.5X6MG316SHCS 2.5 8 100 2.5X8MG316SHCS 2.5 10 100 2.5X10MG316SHCS 2.5 12 100 2.5X12MG316SHCS 3 6 100 3X6MG316SHCS 3 8 100 3X8MG316SHCS 3 10 100 3X10MG316SHCS 3 12 100 3X12MG316SHCS 3 16 100 3X16MG316SHCS 3 20 100 3X20MG316SHCS 3 25 100 3X25MG316SHCS 3 30 100 3X30MG316SHCS 3 35 100 3X35MG316SHCS 3 40 100 3X40MG316SHCS 4 6 100 4X6MG316SHCS 4 8 100 4X8MG316SHCS 4 10 100 4X10MG316SHCS 4 12 100 4X12MG316SHCS 4 16 100 4X16MG316SHCS 4 20 100 4X20MG316SHCS 4 25 100 4X25MG316SHCS 4 30 100 4X30MG316SHCS 4 35 100 4X35MG316SHCS 4 40 100 4X40MG316SHCS 4 45 100 4X45MG316SHCS 4 50 100 4X50MG316SHCS 5 8 100 5X8MG316SHCS 5 10 100 5X10MG316SHCS 5 12 100 5X12MG316SHCS 5 16 100 5X16MG316SHCS 5 20 100 5X20MG316SHCS 5 25 100 5X25MG316SHCS 5 30 100 5X30MG316SHCS 5 35 100 5X35MG316SHCS 5 40 100 5X40MG316SHCS 5 45 100 5X45MG316SHCS 5 50 100 5X50MG316SHCS 5 60 100 5X60MG316SHCS 5 70 100 5X70MG316SHCS 6 8 100 6X8MG316SHCS 6 10 100 6X10MG316SHCS 6 12 100 6X12MG316SHCS 6 16 100 6X16MG316SHCS 6 20 100 6X20MG316SHCS 6 25 100 6X25MG316SHCS 6 30 100 6X30MG316SHCS 6 35 100 6X35MG316SHCS
continued…
Catering for all major industries across Australia, we have a huge range of fastener products available. No matter what type of fastener you need, Coventry Fasteners
will have it, source it or get it manufactured to meet your specifications.
visit us at www.coventryfasteners.com.au
Every fastener you can think of
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SOCKET H
EAD
FASTEN
ERS53AUSTRALIA’S FASTENER SPECIALISTS
BRANCHES AUSTRALIA WIDEGRADE 316 METRIC SOCKET HEAD CAP SCREWS continued…
Dia. Length Pack Part No. mm mm qty
6 40 100 6X40MG316SHCS 6 45 100 6X45MG316SHCS 6 50 100 6X50MG316SHCS 6 60 50 6X60MG316SHCS 6 70 50 6X70MG316SHCS 6 80 50 6X80MG316SHCS 6 90 50 6X90MG316SHCS 6 100 50 6X100MG316SHCS 8 16 100 8X16MG316SHCS 8 20 100 8X20MG316SHCS 8 25 100 8X25MG316SHCS 8 30 100 8X30MG316SHCS 8 35 100 8X35MG316SHCS 8 40 100 8X40MG316SHCS 8 45 100 8X45MG316SHCS 8 50 100 8X50MG316SHCS 8 60 50 8X60MG316SHCS 8 70 50 8X70MG316SHCS 8 80 50 8X80MG316SHCS 8 90 50 8X90MG316SHCS 8 100 50 8X100MG316SHCS 8 120 50 8X120MG316SHCS 10 16 100 10X16MG316SHCS 10 20 100 10X20MG316SHCS 10 25 100 10X25MG316SHCS 10 30 100 10X30MG316SHCS 10 35 100 10X35MG316SHCS 10 40 100 10X40MG316SHCS 10 45 100 10X45MG316SHCS 10 50 100 10X50MG316SHCS 10 60 50 10X60MG316SHCS 10 70 50 10X70MG316SHCS 10 80 50 10X80MG316SHCS 10 90 50 10X90MG316SHCS 10 100 50 10X100MG316SHCS 10 150 25 10X150MG316SHCS 12 20 50 12X20MG316SHCS 12 25 50 12X25MG316SHCS 12 30 50 12X30MG316SHCS 12 35 50 12X35MG316SHCS 12 40 50 12X40MG316SHCS 12 45 50 12X45MG316SHCS 12 50 50 12X50MG316SHCS 12 60 25 12X60MG316SHCS 12 70 25 12X70MG316SHCS 12 80 25 12X80MG316SHCS 12 90 25 12X90MG316SHCS 12 100 25 12X100MG316SHCS 14 40 25 14X40MG316SHCS 14 50 25 14X50MG316SHCS 16 25 25 16X25MG316SHCS 16 30 25 16X30MG316SHCS 16 40 25 16X40MG316SHCS 16 45 25 16X45MG316SHCS 16 50 25 16X50MG316SHCS 16 60 25 16X60MG316SHCS
continued…
GRADE 316 METRIC SOCKET HEAD CAP SCREWS continued…
Dia. Length Pack Part No. mm mm qty
16 70 25 16X70MG316SHCS 16 80 25 16X80MG316SHCS 16 90 25 16X90MG316SHCS 16 100 25 16X100MG316SHCS 20 40 10 20X40MG316SHCS 20 50 10 20X50MG316SHCS 20 60 10 20X60MG316SHCS 20 70 10 20X70MG316SHCS 20 80 10 20X80MG316SHCS 20 90 10 20X90MG316SHCS 20 100 10 20X100MG316SHCS 24 50 10 24X50MG316SHCS 24 80 10 24X80MG316SHCS 24 100 10 24X100MG316SHCS
GRADE 304 UNC SOCKET HEAD CAP SCREWS
Dia. Length Pack Part No. inch inch qty
2-56 ³⁄₁₆ 100 2-56X316NCG304SHCS 2-56 ¹⁄₄ 100 2-56X14NCG304SHCS 2-56 ³⁄₈ 100 2-56X38NCG304SHCS 4-40 ¹⁄₄ 100 4-40X14NCG304SHCS 4-40 ⁵⁄₁₆ 100 4-40X516NCG304SHCS 4-40 ³⁄₈ 100 4-40X38NCG304SHCS 4-40 ¹⁄₂ 100 4-40X12NCG304SHCS 4-40 ⁵⁄₈ 100 4-40X58NCG304SHCS 4-40 ³⁄₄ 100 4-40X34NCG304SHCS 4-40 1 100 4-40X1NCG304SHCS 4-40 1 ¹⁄₂ 100 4-40X1.12NCG304SHCS 5-40 ¹⁄₄ 100 5-40X14NCG304SHCS 5-40 ⁵⁄₁₆ 100 5-40X516NCG304SHCS 5-40 ³⁄₈ 100 5-40X38NCG304SHCS 5-40 ¹⁄₂ 100 5-40X12NCG304SHCS 5-40 ⁵⁄₈ 100 5-40X58NCG304SHCS 5-40 ³⁄₄ 100 5-40X34NCG304SHCS 6-32 ³⁄₁₆ 100 6-32X316NCG304SHCS 6-32 ¹⁄₄ 100 6-32X14NCG304SHCS 6-32 ⁵⁄₁₆ 100 6-32X516NCG304SHCS 6-32 ³⁄₈ 100 6-32X38NCG304SHCS 6-32 ¹⁄₂ 100 6-32X12NCG304SHCS 6-32 ⁵⁄₈ 100 6-32X58NCG304SHCS 6-32 ³⁄₄ 100 6-32X34NCG304SHCS 6-32 1 100 6-32X1NCG304SHCS 6-32 1 ¹⁄₄ 100 6-32X1.14NCG304SHCS
continued…
DOES IT FIT?Choosing the correct fastener for the job is essential. If you’re not sure of the grade, protective coating, head type or thread for the job ask us. Specialist advice is another way we’re making your job easier. Turn to back cover for your nearest branch.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SOCK
ET H
EAD
FA
STEN
ERS
54 AUSTRALIA’S FASTENER SPECIALISTS
SPECIALIST ADVICEGRADE 304 UNC SOCKET HEAD CAP SCREWS continued…
Dia. Length Pack Part No. inch inch qty
8-32 ¹⁄₄ 100 8-32X14NCG304SHCS 8-32 ³⁄₈ 100 8-32X38NCG304SHCS 8-32 ¹⁄₂ 100 8-32X12NCG304SHCS 8-32 ⁵⁄₈ 100 8-32X58NCG304SHCS 8-32 ³⁄₄ 100 8-32X34NCG304SHCS 8-32 1 100 8-32X1NCG304SHCS 8-32 1 ¹⁄₂ 100 8-32X1.12NCG304SHCS 10-24 ¹⁄₄ 100 10-24X14NCG304SHCS 10-24 ³⁄₈ 100 10-24X38NCG304SHCS 10-24 ¹⁄₂ 100 10-24X12NCG304SHCS 10-24 ⁵⁄₈ 100 10-24X58NCG304SHCS 10-24 ³⁄₄ 100 10-24X34NCG304SHCS 10-24 1 100 10-24X1NCG304SHCS 10-24 1 ¹⁄₄ 100 10-24X1.14NCG304SHCS 10-24 1 ¹⁄₂ 100 10-24X1.12NCG304SHCS 10-24 2 100 10-24X2NCG304SHCS ¹⁄₄ ³⁄₈ 100 14X38NCG304SHCS ¹⁄₄ ¹⁄₂ 100 14X12NCG304SHCS ¹⁄₄ ⁵⁄₈ 100 14X58NCG304SHCS ¹⁄₄ ³⁄₄ 100 14X34NCG304SHCS ¹⁄₄ 1 100 14X1NCG304SHCS ¹⁄₄ 1 ¹⁄₄ 100 14X1.14NCG304SHCS ¹⁄₄ 1 ¹⁄₂ 100 14X1.12NCG304SHCS ¹⁄₄ 1 ³⁄₄ 100 14X1.34NCG304SHCS ¹⁄₄ 2 100 14X2NCG304SHCS ¹⁄₄ 2 ¹⁄₄ 50 14X2.14NCG304SHCS ¹⁄₄ 2 ¹⁄₂ 50 14X2.12NCG304SHCS ¹⁄₄ 3 50 14X3NCG304SHCS ⁵⁄₁₆ ¹⁄₂ 100 516X12NCG304SHCS ⁵⁄₁₆ ⁵⁄₈ 100 516X58NCG304SHCS ⁵⁄₁₆ ³⁄₄ 100 516X34NCG304SHCS ⁵⁄₁₆ 1 100 516X1NCG304SHCS ⁵⁄₁₆ 1 ¹⁄₄ 100 516X1.14NCG304SHCS ⁵⁄₁₆ 1 ¹⁄₂ 100 516X1.12NCG304SHCS ⁵⁄₁₆ 1 ³⁄₄ 100 516X1.34NCG304SHCS ⁵⁄₁₆ 2 100 516X2NCG304SHCS ⁵⁄₁₆ 2 ¹⁄₂ 50 516X2.12NCG304SHCS ⁵⁄₁₆ 3 50 516X3NCG304SHCS ³⁄₈ ¹⁄₂ 100 38X12NCG304SHCS ³⁄₈ ⁵⁄₈ 100 38X58NCG304SHCS ³⁄₈ ³⁄₄ 100 38X34NCG304SHCS ³⁄₈ 1 100 38X1NCG304SHCS ³⁄₈ 1 ¹⁄₄ 100 38X1.14NCG304SHCS ³⁄₈ 1 ¹⁄₂ 100 38X1.12NCG304SHCS ³⁄₈ 1 ³⁄₄ 100 38X1.34NCG304SHCS ³⁄₈ 2 100 38X2NCG304SHCS ³⁄₈ 2 ¹⁄₂ 50 38X2.12NCG304SHCS ³⁄₈ 3 50 38X3NCG304SHCS ³⁄₈ 4 50 38X4NCG304SHCS ⁷⁄₁₆ 1 50 716X1NCG304SHCS ⁷⁄₁₆ 1 ¹⁄₂ 50 716X1.12NCG304SHCS ¹⁄₂ 1 25 12X1NCG304SHCS ¹⁄₂ 1 ¹⁄₄ 25 12X1.14NCG304SHCS ¹⁄₂ 1 ¹⁄₂ 25 12X1.12NCG304SHCS ¹⁄₂ 2 25 12X2NCG304SHCS ¹⁄₂ 2 ¹⁄₂ 25 12X2.12NCG304SHCS ¹⁄₂ 3 25 12X3NCG304SHCS
GRADE 316 UNC SOCKET HEAD CAP SCREWS
Dia. Length Pack Part No. inch inch qty
¹⁄₄ ¹⁄₂ 100 14X12NCG316SHCS ¹⁄₄ ⁵⁄₈ 100 14X58NCG316SHCS ¹⁄₄ ³⁄₄ 100 14X34NCG316SHCS ¹⁄₄ 1 100 14X1NCG316SHCS ¹⁄₄ 1 ¹⁄₄ 100 14X1.14NCG316SHCS ¹⁄₄ 1 ¹⁄₂ 100 14X1.12NCG316SHCS ¹⁄₄ 2 100 14X2NCG316SHCS ⁵⁄₁₆ ³⁄₄ 100 516X34NCG316SHCS ⁵⁄₁₆ 1 100 516X1NCG316SHCS ⁵⁄₁₆ 1 ¹⁄₄ 100 516X1.14NCG316SHCS ⁵⁄₁₆ 1 ¹⁄₂ 100 516X1.12NCG316SHCS ⁵⁄₁₆ 2 100 516X2NCG316SHCS ⁵⁄₁₆ 2 ¹⁄₂ 50 516X2.12NCG316SHCS ³⁄₈ ³⁄₄ 100 38X34NCG316SHCS ³⁄₈ 1 100 38X1NCG316SHCS ³⁄₈ 1 ¹⁄₄ 100 38X1.14NCG316SHCS ³⁄₈ 1 ¹⁄₂ 100 38X1.12NCG316SHCS ³⁄₈ 2 100 38X2NCG316SHCS ³⁄₈ 2 ¹⁄₂ 50 38X2.12NCG316SHCS ¹⁄₂ 1 50 12X1NCG316SHCS ¹⁄₂ 1 ¹⁄₄ 50 12X1.14NCG316SHCS ¹⁄₂ 1 ¹⁄₂ 50 12X1.12NCG316SHCS ¹⁄₂ 2 50 12X2NCG316SHCS ¹⁄₂ 2 ¹⁄₂ 25 12X2.12NCG316SHCS ¹⁄₂ 3 25 12X3NCG316SHCS ⁵⁄₈ 1 ¹⁄₄ 25 58X1.14NCG316SHCS ⁵⁄₈ 1 ¹⁄₂ 25 58X1.12NCG316SHCS ⁵⁄₈ 2 25 58X2NCG316SHCS ⁵⁄₈ 2 ¹⁄₂ 25 58X2.12NCG316SHCS ⁵⁄₈ 3 25 58X3NCG316SHCS ³⁄₄ 1 ¹⁄₂ 10 34X1.12NCG316SHCS ³⁄₄ 2 10 34X2NCG316SHCS ³⁄₄ 2 ¹⁄₂ 10 34X2.12NCG316SHCS
GRADE 304 UNF SOCKET HEAD CAP SCREWS
Dia. Length Pack Part No. inch inch qty
10-32 ¹⁄₄ 100 10-32X14NFG304SHCS 10-32 ³⁄₈ 100 10-32X38NFG304SHCS 10-32 ¹⁄₂ 100 10-32X12NFG304SHCS 10-32 ⁵⁄₈ 100 10-32X58NFG304SHCS 10-32 ³⁄₄ 100 10-32X34NFG304SHCS 10-32 1 100 10-32X1NFG304SHCS 10-32 1 ¹⁄₄ 100 10-32X1.14NFG304SHCS 10-32 1 ¹⁄₂ 100 10-32X1.12NFG304SHCS 10-32 1 ³⁄₄ 100 10-32X1.34NFG304SHCS ¹⁄₄ ³⁄₈ 100 14X38NFG304SHCS ¹⁄₄ ¹⁄₂ 100 14X12NFG304SHCS ¹⁄₄ ⁵⁄₈ 100 14X58NFG304SHCS ¹⁄₄ ³⁄₄ 100 14X34NFG304SHCS ¹⁄₄ 1 100 14X1NFG304SHCS ¹⁄₄ 1 ¹⁄₄ 100 14X1.14NFG304SHCS
continued…
SOCKET H
EAD
FASTEN
ERS55AUSTRALIA’S FASTENER SPECIALISTS
SPECIALIST ADVICE
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
GRADE 304 UNF SOCKET HEAD CAP SCREWS continued…
Dia. Length Pack Part No. inch inch qty
¹⁄₄ 1 ¹⁄₂ 100 14X1.12NFG304SHCS ⁵⁄₁₆ ³⁄₄ 50 516X34NFG304SHCS ⁵⁄₁₆ 1 50 516X1NFG304SHCS ⁵⁄₁₆ 1 ¹⁄₄ 50 516X1.14NFG304SHCS ⁵⁄₁₆ 1 ¹⁄₂ 50 516X1.12NFG304SHCS ³⁄₈ ³⁄₄ 50 38X34NFG304SHCS ³⁄₈ 1 50 38X1NFG304SHCS ³⁄₈ 1 ¹⁄₄ 50 38X1.14NFG304SHCS ³⁄₈ 1 ¹⁄₂ 50 38X1.12NFG304SHCS ³⁄₈ 2 50 38X2NFG304SHCS ³⁄₈ 2 ¹⁄₂ 50 38X2.12NFG304SHCS ⁷⁄₁₆ 1 ¹⁄₂ 50 716X1.12NFG304SHCS ⁷⁄₁₆ 2 50 716X2NFGH304SHCS ¹⁄₂ 1 ¹⁄₂ 25 12X1.12NFG304SHCS ¹⁄₂ 2 25 12X2NFG304SHCS
GRADE 316 BSW SOCKET HEAD CAP SCREWS
Dia. Length Pack Part No. inch inch qty
¹⁄₂ 1 50 12X1BWG316SHCS ¹⁄₂ 1 ¹⁄₄ 50 12X1.14BWG316SHCS ¹⁄₂ 1 ¹⁄₂ 50 12X1.12BWG316SHCS ¹⁄₂ 2 50 12X2BWG316SHCS ¹⁄₂ 2 ¹⁄₂ 25 12X2.12BWG316SHCS
Button Head Socket Screws
GRADE 304 METRIC BUTTON HEAD SOCKET SCREWS
Dia. Length Pack Part No. mm mm qty
3 6 100 3X6MG304BHSS 3 8 100 3X8MG304BHSS 3 10 100 3X10MG304BHSS 3 12 100 3X12MG304BHSS 3 16 100 3X16MG304BHSS 3 20 100 3X20MG304BHSS 3 25 100 3X25MG304BHSS 4 6 100 4X6MG304BHSS 4 8 100 4X8MG304BHSS 4 10 100 4X10MG304BHSS 4 12 100 4X12MG304BHSS 4 16 100 4X16MG304BHSS
continued…
GRADE 304 METRIC BUTTON HEAD SOCKET SCREWS continued…
Dia. Length Pack Part No. mm mm qty
4 20 100 4X20MG304BHSS 4 25 100 4X25MG304BHSS 5 10 100 5X10MG304BHSS 5 12 100 5X12MG304BHSS 5 16 100 5X16MG304BHSS 5 20 100 5X20MG304BHSS 5 25 100 5X25MG304BHSS 5 30 100 5X30MG304BHSS 5 35 100 5X35MG304BHSS 5 40 100 5X40MG304BHSS 6 10 100 6X10MG304BHSS 6 12 100 6X12MG304BHSS 6 16 100 6X16MG304BHSS 6 20 100 6X20MG304BHSS 6 25 100 6X25MG304BHSS 6 30 100 6X30MG304BHSS 6 35 100 6X35MG304BHSS 6 40 100 6X40MG304BHSS 6 50 100 6X50MG304BHSS 8 12 100 8X12MG304BHSS 8 16 100 8X16MG304BHSS 8 20 100 8X20MG304BHSS 8 25 100 8X25MG304BHSS 8 30 100 8X30MG304BHSS 8 35 100 8X35MG304BHSS 8 40 100 8X40MG304BHSS 8 50 100 8X50MG304BHSS 8 60 100 8X60MG304BHSS 10 16 50 10X16MG304BHSS 10 20 50 10X20MG304BHSS 10 25 50 10X25MG304BHSS 10 30 50 10X30MG304BHSS 10 35 50 10X35MG304BHSS 10 40 50 10X40MG304BHSS 10 50 50 10X50MG304BHSS 12 20 25 12X20MG304BHSS 12 25 25 12X25MG304BHSS 12 30 25 12X30MG304BHSS 12 35 25 12X35MG304BHSS 12 40 25 12X40MG304BHSS 12 50 25 12X50MG304BHSS
GRADE 304 UNC BUTTON HEAD SOCKET SCREWS
Dia. Length Pack Part No. inch inch qty
6-32 ¹⁄₄ 100 6-32X14NCG304BHSS 6-32 ³⁄₈ 100 6-32X38NCG304BHSS 6-32 ¹⁄₂ 100 6-32X12NCG304BHSS 8-32 ¹⁄₄ 100 8-32X14NCG304BHSS 8-32 ³⁄₈ 100 8-32X38NCG304BHSS 8-32 ¹⁄₂ 100 8-32X12NCG304BHSS 8-32 ³⁄₄ 100 8-32X34NCG304BHSS 8-32 1 100 8-32X1NCG304BHSS 10-24 ³⁄₈ 100 10-24X38NCG304BHSS 10-24 ¹⁄₂ 100 10-24X12NCG304BHSS
continued…
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SOCK
ET H
EAD
FA
STEN
ERS
56 AUSTRALIA’S FASTENER SPECIALISTS
FAST DELIVERYGRADE 304 UNC BUTTON HEAD SOCKET SCREWS continued…
Dia. Length Pack Part No. mm mm qty
10-24 ⁵⁄₈ 100 10-24X58NCG304BHSS 10-24 ³⁄₄ 100 10-24X34NCG304BHSS 10-24 1 100 10-24X1NCG304BHSS 10-24 1 ¹⁄₄ 100 10-24X1.14NCG304BHSS ¹⁄₄ ³⁄₈ 100 14X38NCG304BHSS ¹⁄₄ ¹⁄₂ 100 14X12NCG304BHSS ¹⁄₄ ⁵⁄₈ 100 14X58NCG304BHSS ¹⁄₄ ³⁄₄ 100 14X34NCG304BHSS ¹⁄₄ 1 100 14X1NCG304BHSS ¹⁄₄ 1 ¹⁄₄ 100 14X1.14NCG304BHSS ¹⁄₄ 1 ¹⁄₂ 100 14X1.12NCG304BHSS ¹⁄₄ 2 100 14X2NCG304BHSS ⁵⁄₁₆ ⁵⁄₈ 100 516X58NCG304BHSS ⁵⁄₁₆ ³⁄₄ 100 516X34NCG304BHSS ⁵⁄₁₆ 1 100 516X1NCG304BHSS ⁵⁄₁₆ 1 ¹⁄₄ 100 516X1.14NCG304BHSS ⁵⁄₁₆ 1 ¹⁄₂ 100 516X1.12NCG304BHSS ⁵⁄₁₆ 2 100 516X2NCG304BHSS ³⁄₈ ³⁄₄ 50 38X34NCG304BHSS ³⁄₈ 1 50 38X1NCG304BHSS ³⁄₈ 1 ¹⁄₄ 50 38X1.14NCG304BHSS ³⁄₈ 1 ¹⁄₂ 50 38X1.12NCG304BHSS ³⁄₈ 2 50 38X2NCG304BHSS ¹⁄₂ 1 ¹⁄₄ 50 12X1.14NCG304BHSS ¹⁄₂ 1 ¹⁄₂ 50 12X1.12NCG304BHSS ¹⁄₂ 2 50 12X2NCG304BHSS
GRADE 304 UNF BUTTON HEAD SOCKET SCREWS
Dia. Length Pack Part No. inch inch qty
10-32 ³⁄₈ 100 10-32X38NFG304BHSS 10-32 ¹⁄₂ 100 10-32X12NFG304BHSS 10-32 ⁵⁄₈ 100 10-32X58NFG304BHSS 10-32 ³⁄₄ 100 10-32X34NFG304BHSS 10-32 1 100 10-32X1NFG304BHSS
Hexagon Socket Set Screws
GRADE 304 METRIC HEXAGON SOCKET SET SCREWS – CUP POINT
Dia. Length Pack Part No. mm mm qty
2 3 100 2X3MG304SSS
continued…
GRADE 304 METRIC HEXAGON SOCKET SET SCREWS – CUP POINT continued…
Dia. Length Pack Part No. mm mm qty
2 4 100 2X4MG304SSS 2 6 100 2X6MG304SSS 2.5 4 100 2.5X4MG304SSS 2.5 5 100 2.5X5MG304SSS 2.5 6 100 2.5X6MG304SSS 3 3 100 3X3MG304SSS 3 4 100 3X4MG304SSS 3 5 100 3X5MG304SSS 3 6 100 3X6MG304SSS 3 8 100 3X8MG304SSS 3 10 100 3X10MG304SSS 3 12 100 3X12MG304SSS 3 16 100 3X16MG304SSS 3 20 100 3X20MG304SSS 4 4 100 4X4MG304SSS 4 5 100 4X5MG304SSS 4 6 100 4X6MG304SSS 4 8 100 4X8MG304SSS 4 10 100 4X10MG304SSS 4 12 100 4X12MG304SSS 4 16 100 4X16MG304SSS 4 20 100 4X20MG304SSS 5 5 100 5X5MG304SSS 5 6 100 5X6MG304SSS 5 8 100 5X8MG304SSS 5 10 100 5X10MG304SSS 5 12 100 5X12MG304SSS 5 16 100 5X16MG304SSS 5 20 100 5X20MG304SSS 5 25 100 5X25MG304SSS 5 30 100 5X30MG304SSS 6 6 100 6X6MG304SSS 6 8 100 6X8MG304SSS 6 10 100 6X10MG304SSS 6 12 100 6X12MG304SSS 6 16 100 6X16MG304SSS 6 20 100 6X20MG304SSS 6 25 100 6X25MG304SSS 6 30 100 6X30MG304SSS 8 8 100 8X8MG304SSS 8 10 100 8X10MG304SSS 8 12 100 8X12MG304SSS 8 16 100 8X16MG304SSS 8 20 100 8X20MG304SSS 8 25 100 8X25MG304SSS 8 30 100 8X30MG304SSS 8 35 100 8X35MG304SSS 8 40 100 8X40MG304SSS 8 50 100 8X50MG304SSS 10 10 100 10X10MG304SSS 10 12 100 10X12MG304SSS 10 16 100 10X16MG304SSS 10 20 100 10X20MG304SSS 10 25 100 10X25MG304SSS 10 30 100 10X30MG304SSS
continued…
57
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SOCKET H
EAD
FASTEN
ERSAUSTRALIA’S FASTENER SPECIALISTS
FAST DELIVERYGRADE 304 METRIC HEXAGON SOCKET SET SCREWS – CUP POINT continued…
Dia. Length Pack Part No. mm mm qty
10 35 100 10X35MG304SSS 10 40 100 10X40MG304SSS 10 50 100 10X50MG304SSS 12 12 50 12X12MG304SSS 12 16 50 12X16MG304SSS 12 20 50 12X20MG304SSS 12 25 50 12X25MG304SSS 12 30 50 12X30MG304SSS 12 40 50 12X40MG304SSS 12 50 50 12X50MG304SSS 16 16 50 16X16MG304SSS 16 20 50 16X20MG304SSS 16 25 50 16X25MG304SSS 16 30 50 16X30MG304SSS 16 40 50 16X40MG304SSS 16 50 50 16X50MG304SSS
GRADE 316 METRIC HEXAGON SOCKET SCREWS – CUP POINT
Dia. Length Pack Part No. mm mm qty
3 4 100 3X4MG316SSS 4 4 100 4X4MG316SSS 4 5 100 4X5MG316SSS 4 6 100 4X6MG316SSS 4 8 100 4X8MG316SSS 4 10 100 4X10MG316SSS 4 12 100 4X12MG316SSS 5 5 100 5X5MG316SSS 5 6 100 5X6MG316SSS 5 8 100 5X8MG316SSS 5 10 100 5X10MG316SSS 5 12 100 5X12MG316SSS 5 16 100 5X16MG316SSS 6 6 100 6X6MG316SSS 6 8 100 6X8MG316SSS 6 10 100 6X10MG316SSS 6 12 100 6X12MG316SSS 6 16 100 6X16MG316SSS 6 20 100 6X20MG316SSS 8 8 100 8X8MG316SSS 8 10 100 8X10MG316SSS 8 12 100 8X12MG316SSS 8 16 100 8X16MG316SSS 8 20 100 8X20MG316SSS 10 10 100 10X10MG316SSS 10 12 100 10X12MG316SSS 10 16 100 10X16MG316SSS 10 20 100 10X20MG316SSS 10 25 100 10X25MG316SSS 10 30 100 10X30MG316SSS 12 12 50 12X12MG316SSS 12 16 50 12X16MG316SSS 12 20 50 12X20MG316SSS 12 25 50 12X25MG316SSS 12 30 50 12X30MG316SSS 12 40 50 12X40MG316SSS
As a fastener specialist, Coventry Fasteners' extensive industry experience enables our staff to provide comprehensive technical support for all types of fasteners. Our access to information and ability to source
many different materials and coatings, means you can feel comfortable that you are getting the type of support that only comes from experience and a strong network of manufacturing partners.
visit us at www.coventryfasteners.com.au
Specialist advice when you need it
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SOCK
ET H
EAD
FA
STEN
ERS
58 AUSTRALIA’S FASTENER SPECIALISTS
FRIENDLY SERVICEGRADE 304 UNC HEXAGON SOCKET SET SCREWS – CUP POINT
Dia. Length Pack Part No. inch inch qty
4-40 ¹⁄₈ 100 4-40X18NCG304SSS 4-40 ¹⁄₄ 100 4-40X14NCG304SSS 4-40 ³⁄₈ 100 4-40X38NCG304SSS 5-40 ¹⁄₈ 100 5-40X18NCG304SSS 5-40 ³⁄₁₆ 100 5-40X316NCG304SSS 5-40 ¹⁄₄ 100 5-40X14NCG304SSS 5-40 ⁵⁄₁₆ 100 5-40X516NCG304SSS 5-40 ³⁄₈ 100 5-40X38NCG304SSS 5-40 ¹⁄₂ 100 5-40X12NCG304SSS 6-32 ¹⁄₈ 100 6-32X18NCG304SSS 6-32 ³⁄₁₆ 100 6-32X316NCG304SSS 6-32 ¹⁄₄ 100 6-32X14NCG304SSS 6-32 ¹⁄₂ 100 6-32X12NCG304SSS 8-32 ¹⁄₈ 100 8-32X18NCG304SSS 8-32 ³⁄₁₆ 100 8-32X316NCG304SSS 8-32 ¹⁄₄ 100 8-32X14NCG304SSS 8-32 ³⁄₈ 100 8-32X38NCG304SSS 8-32 ¹⁄₂ 100 8-32X12NCG304SSS 8-32 ⁵⁄₈ 100 8-32X58NCG304SSS 8-32 ³⁄₄ 100 8-32X34NCG304SSS 10-24 ³⁄₁₆ 100 10-24X316NCG304SSS 10-24 ¹⁄₄ 100 10-24X14NCG304SSS 10-24 ⁵⁄₁₆ 100 10-24X516NCG304SSS 10-24 ³⁄₈ 100 10-24X38NCG304SSS 10-24 ¹⁄₂ 100 10-24X12NCG304SSS 10-24 ⁵⁄₈ 100 10-24X58NCG304SSS 10-24 ³⁄₄ 100 10-24X34NCG304SSS 10-24 1 100 10-24X1NCG304SSS ¹⁄₄ ³⁄₁₆ 100 14X316NCG304SSS ¹⁄₄ ¹⁄₄ 100 14X14NCG304SSS ¹⁄₄ ⁵⁄₁₆ 100 14X516NCG304SSS ¹⁄₄ ³⁄₈ 100 14X38NCG304SSS ¹⁄₄ ¹⁄₂ 100 14X12NCG304SSS ¹⁄₄ ⁵⁄₈ 100 14X58NCG304SSS ¹⁄₄ ³⁄₄ 100 14X34NCG304SSS ¹⁄₄ 1 100 14X1NCG304SSS ⁵⁄₁₆ ⁵⁄₁₆ 100 516X516NCG304SSS ⁵⁄₁₆ ³⁄₈ 100 516X38NCG304SSS ⁵⁄₁₆ ¹⁄₂ 100 516X12NCG304SSS ⁵⁄₁₆ ⁵⁄₈ 100 516X58NCG304SSS ⁵⁄₁₆ ³⁄₄ 100 516X34NCG304SSS ⁵⁄₁₆ 1 100 516X1NCG304SSS ³⁄₈ ³⁄₈ 100 38X38NCG304SSS ³⁄₈ ¹⁄₂ 100 38X12NCG304SSS ³⁄₈ ⁵⁄₈ 100 38X58NCG304SSS ³⁄₈ ³⁄₄ 100 38X34NCG304SSS ³⁄₈ 1 100 38X1NCG304SSS ³⁄₈ 1 ¹⁄₄ 100 38X1.14NCG304SSS ¹⁄₂ ¹⁄₂ 50 12X12NCG304SSS ¹⁄₂ ⁵⁄₈ 50 12X58NCG304SSS ¹⁄₂ ³⁄₄ 50 12X34NCG304SSS ¹⁄₂ 1 50 12X1NCG304SSS
GRADE 316 UNC HEXAGON SOCKET SET SCREWS – CUP POINT
Dia. Length Pack Part No. inch inch qty
10-24 ³⁄₁₆ 100 10-24X316NCG316SSS 10-24 ³⁄₈ 100 10-24X38NCG316SSS ¹⁄₄ ¹⁄₄ 100 14X14NCG316SSS ¹⁄₄ ⁵⁄₁₆ 100 14X516NCG316SSS ¹⁄₄ ³⁄₈ 100 14X38NCG316SSS ¹⁄₄ ¹⁄₂ 100 14X12NCG316SSS ¹⁄₄ ³⁄₄ 100 14X34NCG316SSS ⁵⁄₁₆ ⁵⁄₁₆ 100 516X516NCG316SSS ⁵⁄₁₆ ³⁄₈ 100 516X38NCG316SSS ⁵⁄₁₆ ¹⁄₂ 100 516X12NCG316SSS ⁵⁄₁₆ ³⁄₄ 100 516X34NCG316SSS ⁵⁄₁₆ 1 100 516X1NCG316SSS ³⁄₈ ³⁄₈ 100 38X38NCG316SSS ³⁄₈ ¹⁄₂ 100 38X12NCG316SSS ³⁄₈ ⁵⁄₈ 100 38X58NCG316SSS ³⁄₈ ³⁄₄ 100 38X34NCG316SSS ³⁄₈ 1 100 38X1NCG316SSS
GRADE 304 UNF HEXAGON SOCKET SET SCREWS – CUP POINT
Dia. Length Pack Part No. inch inch qty
10-32 ³⁄₁₆ 100 10-32X316NFG304SSS 10-32 ¹⁄₄ 100 10-32X14NFG304SSS 10-32 ⁵⁄₁₆ 100 10-32X516NFG304SSS 10-32 ³⁄₈ 100 10-32X38NFG304SSS 10-32 ¹⁄₂ 100 10-32X12NFG304SSS 10-32 ⁵⁄₈ 100 10-32X58NFG304SSS 10-32 1 100 10-32X1NFG304SSS ¹⁄₄ ¹⁄₄ 100 14X14NFG304SSS ¹⁄₄ ³⁄₈ 100 14X38NFG304SSS ¹⁄₄ ¹⁄₂ 100 14X12NFG304SSS ⁵⁄₁₆ ⁵⁄₁₆ 100 516X516NFG304SSS ⁵⁄₁₆ ³⁄₈ 100 516X38NFG304SSS ⁵⁄₁₆ 1 100 516X1NFG304SSS ³⁄₈ ³⁄₈ 100 38X38NFG304SSS ³⁄₈ ¹⁄₂ 100 38X12NFG304SSS ³⁄₈ ³⁄₄ 100 38X34NFG304SSS ³⁄₈ 1 100 38X1NFG304SSS
GRADE 316 BSW HEXAGON SOCKET SET SCREWS – CUP POINT
Dia. Length Pack Part No. inch inch qty
¹⁄₂ ¹⁄₂ 50 12X12BWG316SSS ¹⁄₂ ³⁄₄ 50 12X34BWG316SSS ¹⁄₂ 1 50 12X1BWG316SSS
WE ALSO SUPPLY INDUSTRIAL, CONSTRUCTION AND SPECIALISED FASTENERS AS WELL AS ASSOCIATED TOOLS AND CONSUMABLES.
Call your nearest branch now for a catalogue.
59
ROUND SLOTTED METAL THREAD SCREWS/CHEESE SLOTTED METAL THREASCREWS/PAN SLOTTED METAL THREAD SCREWS/PAN PHILLIPS METAL THREASCREWS/COUNTERSUNK SLOTTED METAL THREAD SCREWS/COUNTERSUNPHILLIPS METAL THREAD SCREWS/MUSHROOM PHILLIPS METAL THREASCREWS/ROUND SLOTTED METAL THREAD SCREWS/CHEESE SLOTTED METATHREAD SCREWS/PAN SLOTTED METAL THREAD SCREWS/PAN PHILLIPMETAL THREAD SCREWS/COUNTERSUNK SLOTTED METAL THREAD SCREWSCOUNTERSUNK PHILLIPS METAL THREAD SCREWS/MUSHROOM PHILLIPMETAL THREAD SCREWS/ROUND SLOTTED METAL THREAD SCREWS/CHEESMETAL THREAD SCREWS
MET
AL
THRE
AD
SCR
EWS
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
60 AUSTRALIA’S FASTENER SPECIALISTS
HUGE RANGE
Contact your local Coventry Fasteners branch for more information on this product (see back of catalogue for your nearest branch). WANT TO KNOW MORE?
WHY WE STOCK IT
James Glen is committed to expanding its product portfolio across all stainless steel product ranges.James Glen is Australia’s biggest stainless steel fastener company with over 5,000 products to suit just about every fixing application. Which is why James Glen is the stainless steel fastener we recommend to our customers. Coventry Fasteners is the largest retailer of James Glen stainless steel fasteners in the country and the entire James Glen range is available through our national network of stores. For more information about James Glen, including product training and technical manuals, visit www.jamesglen.com.au. Giving you a bigger choice – just another way we’re making your job easier.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
META
L THREA
D SCREW
S61AUSTRALIA’S FASTENER SPECIALISTS
HUGE RANGEMetal Thread Screws
GRADE 304 METRIC PAN SLOTTED METAL THREAD SCREWS
Dia. Length Pack Part No. mm mm qty
2.5 12 100 2.5X12MG304PMT 3 6 200 3X6MG304PMT 3 8 200 3X8MG304PMT 3 10 200 3X10MG304PMT 3 12 200 3X12MG304PMT 3 16 200 3X16MG304PMT 3 20 200 3X20MG304PMT 3 25 200 3X25MG304PMT 3 30 200 3X30MG304PMT 4 6 200 4X6MG304PMT 4 8 200 4X8MG304PMT 4 10 200 4X10MG304PMT 4 12 200 4X12MG304PMT 4 16 200 4X16MG304PMT 4 20 200 4X20MG304PMT 4 25 200 4X25MG304PMT 4 30 200 4X30MG304PMT 4 35 200 4X35MG304PMT 4 40 200 4X40MG304PMT 4 50 200 4X50MG304PMT 5 8 100 5X8MG304PMT 5 10 100 5X10MG304PMT 5 12 100 5X12MG304PMT 5 16 100 5X16MG304PMT 5 20 100 5X20MG304PMT 5 25 100 5X25MG304PMT 5 30 100 5X30MG304PMT 5 35 100 5X35MG304PMT 5 40 100 5X40MG304PMT 5 45 100 5X45MG304PMT 5 50 100 5X50MG304PMT 5 60 100 5X60MG304PMT 5 65 100 5X65MG304PMT 5 75 100 5X75MG304PMT 6 10 100 6X10MG304PMT 6 12 100 6X12MG304PMT 6 16 100 6X16MG304PMT 6 20 100 6X20MG304PMT 6 25 100 6X25MG304PMT 6 30 100 6X30MG304PMT 6 35 100 6X35MG304PMT 6 40 100 6X40MG304PMT 6 45 100 6X45MG304PMT
continued…
GRADE 304 METRIC PAN SLOTTED METAL THREAD SCREWS continued…
Dia. Length Pack Part No. mm mm qty
6 50 100 6X50MG304PMT 6 60 50 6X60MG304PMT 6 65 50 6X65MG304PMT 8 12 100 8X12MG304PMT 8 16 100 8X16MG304PMT 8 20 100 8X20MG304PMT 8 25 100 8X25MG304PMT 8 30 100 8X30MG304PMT 8 40 100 8X40MG304PMT 8 50 100 8X50MG304PMT
GRADE 316 METRIC PAN SLOTTED METAL THREAD SCREWS
Dia. Length Pack Part No. mm mm qty
3 6 100 3X6MG316PMT 3 8 100 3X8MG316PMT 3 10 100 3X10MG316PMT 3 12 100 3X12MG316PMT 3 16 100 3X16MG316PMT 3 20 100 3X20MG316PMT 3 25 100 3X25MG316PMT 3 30 100 3X30MG316PMT 4 6 100 4X6MG316PMT 4 8 100 4X8MG316PMT 4 10 100 4X10MG316PMT 4 12 100 4X12MG316PMT 4 16 100 4X16MG316PMT 4 20 100 4X20MG316PMT 4 25 100 4X25MG316PMT 4 30 100 4X30MG316PMT 4 50 100 4X50MG316PMT 5 10 100 5X10MG316PMT 5 12 100 5X12MG316PMT 5 16 100 5X16MG316PMT 5 20 100 5X20MG316PMT 5 25 100 5X25MG316PMT 5 30 100 5X30MG316PMT 5 40 100 5X40MG316PMT 5 50 100 5X50MG316PMT 6 10 100 6X10MG316PMT 6 12 100 6X12MG316PMT
continued…
ONLINE CATALOGUEVisit www.coventryfasteners.com.au to view current list prices for all products in our Stainless Steel, Industrial and Construction Fasteners catalogues. Current list prices at the click of a button – it’s just another way we’re making your job easier.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
MET
AL
THRE
AD
SCR
EWS
62 AUSTRALIA’S FASTENER SPECIALISTS
BEST VALUEGRADE 316 METRIC PAN SLOTTED METAL THREAD SCREWS continued…
Dia. Length Pack Part No. mm mm qty
6 16 100 6X16MG316PMT 6 20 100 6X20MG316PMT 6 25 100 6X25MG316PMT 6 30 100 6X30MG316PMT 6 40 100 6X40MG316PMT 6 50 100 6X50MG316PMT 6 60 50 6X60MG316PMT 8 12 100 8X12MG316PMT 8 16 100 8X16MG316PMT 8 20 100 8X20MG316PMT 8 25 100 8X25MG316PMT 8 30 100 8X30MG316PMT 8 35 100 8X35MG316PMT 8 40 100 8X40MG316PMT 8 50 100 8X50MG316PMT 10 25 50 10X25MG316PMT 10 30 50 10X30MG316PMT 10 40 50 10X40MG316PMT 10 50 50 10X50MG316PMT
GRADE 304 METRIC PAN PHILLIPS METAL THREAD SCREWS
Dia. Length Pack Part No. mm mm qty
2 4 100 2X4MG304PCRMT 2 5 100 2X5MG304PCRMT 2 6 100 2X6MG304PCRMT 2 8 100 2X8MG304PCRMT 2 10 100 2X10MG304PCRMT 2 12 100 2X12MG304PCRMT 2 16 100 2X16MG304PCRMT 2.5 4 100 2.5X4MG304PCRMT 2.5 5 100 2.5X5MG304PCRMT 2.5 6 100 2.5X6MG304PCRMT 2.5 8 100 2.5X8MG304PCRMT 2.5 10 100 2.5X10MG304PCRMT 2.5 12 100 2.5X12MG304PCRMT 2.5 16 100 2.5X16MG304PCRMT 2.5 20 100 2.5X20MG304PCRMT 2.5 25 100 2.5X25MG304PCRMT 3 4 100 3X4MG304PCRMT 3 6 100 3X6MG304PCRMT 3 8 100 3X8MG304PCRMT 3 10 100 3X10MG304PCRMT 3 12 100 3X12MG304PCRMT 3 16 100 3X16MG304PCRMT 3 20 100 3X20MG304PCRMT 3 25 100 3X25MG304PCRMT 3 30 100 3X30MG304PCRMT 3 35 100 3X35MG304PCRMT 3 40 100 3X40MG304PCRMT 3 50 100 3X50MG304PCRMT 4 6 100 4X6MG304PCRMT 4 8 100 4X8MG304PCRMT 4 10 100 4X10MG304PCRMT
continued…
GRADE 304 METRIC PAN PHILLIPS METAL THREAD SCREWS continued…
Dia. Length Pack Part No. mm mm qty
4 12 100 4X12MG304PCRMT 4 16 100 4X16MG304PCRMT 4 20 100 4X20MG304PCRMT 4 25 100 4X25MG304PCRMT 4 30 100 4X30MG304PCRMT 4 35 100 4X35MG304PCRMT 4 40 100 4X40MG304PCRMT 4 50 100 4X50MG304PCRMT 5 8 100 5X8MG304PCRMT 5 10 100 5X10MG304PCRMT 5 12 100 5X12MG304PCRMT 5 16 100 5X16MG304PCRMT 5 20 100 5X20MG304PCRMT 5 25 100 5X25MG304PCRMT 5 30 100 5X30MG304PCRMT 5 35 100 5X35MG304PCRMT 5 40 100 5X40MG304PCRMT 5 50 100 5X50MG304PCRMT 5 65 100 5X65MG304PCRMT 5 75 100 5X75MG304PCRMT 6 8 100 6X8MG304PCRMT 6 10 100 6X10MG304PCRMT 6 12 100 6X12MG304PCRMT 6 16 100 6X16MG304PCRMT 6 20 100 6X20MG304PCRMT 6 25 100 6X25MG304PCRMT 6 30 100 6X30MG304PCRMT 6 35 100 6X35MG304PCRMT 6 40 100 6X40MG304PCRMT 6 50 100 6X50MG304PCRMT 6 60 50 6X60MG304PCRMT 6 65 50 6X65MG304PCRMT 6 75 50 6X75MG304PCRMT 8 20 100 8X20MG304PCRMT 8 25 100 8X25MG304PCRMT 8 30 100 8X30MG304PCRMT 8 40 100 8X40MG304PCRMT 8 50 100 8X50MG304PCRMT
GRADE 316 METRIC PAN PHILLIPS METAL THREAD SCREWS
Dia. Length Pack Part No. mm mm qty
3 6 100 3X6MG316PCRMT 3 8 100 3X8MG316PCRMT 3 10 100 3X10MG316PCRMT 3 12 100 3X12MG316PCRMT 3 16 100 3X16MG316PCRMT 3 20 100 3X20MG316PCRMT 3 25 100 3X25MG316PCRMT 4 6 100 4X6MG316PCRMT 4 8 100 4X8MG316PCRMT 4 10 100 4X10MG316PCRMT 4 12 100 4X12MG316PCRMT 4 16 100 4X16MG316PCRMT
continued…
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
META
L THREA
D SCREW
S63AUSTRALIA’S FASTENER SPECIALISTS
BEST VALUEGRADE 316 METRIC PAN PHILLIPS METAL THREAD SCREWScontinued…
Dia. Length Pack Part No. mm mm qty
4 20 100 4X20MG316PCRMT 4 25 100 4X25MG316PCRMT 4 30 100 4X30MG316PCRMT 4 50 100 4X50MG316PCRMT 5 10 100 5X10MG316PCRMT 5 12 100 5X12MG316PCRMT 5 16 100 5X16MG316PCRMT 5 20 100 5X20MG316PCRMT 5 25 100 5X25MG316PCRMT 5 30 100 5X30MG316PCRMT 5 40 100 5X40MG316PCRMT 5 50 100 5X50MG316PCRMT 6 12 100 6X12MG316PCRMT 6 16 100 6X16MG316PCRMT 6 20 100 6X20MG316PCRMT 6 25 100 6X25MG316PCRMT 6 30 100 6X30MG316PCRMT 6 40 100 6X40MG316PCRMT 6 50 100 6X50MG316PCRMT
GRADE 304 METRIC CSK SLOTTED METAL THREAD SCREWS
Dia. Length Pack Part No. mm mm qty
2.5 10 100 2.5X10MG304CMT 3 5 200 3X5MG304CMT 3 6 200 3X6MG304CMT 3 8 200 3X8MG304CMT 3 10 200 3X10MG304CMT 3 12 200 3X12MG304CMT 3 16 200 3X16MG304CMT 3 20 200 3X20MG304CMT 3 25 200 3X25MG304CMT 3 30 200 3X30MG304CMT 3 40 200 3X40MG304CMT 4 6 200 4X6MG304CMT 4 8 200 4X8MG304CMT 4 10 200 4X10MG304CMT 4 12 200 4X12MG304CMT 4 16 200 4X16MG304CMT 4 20 200 4X20MG304CMT 4 25 200 4X25MG304CMT 4 30 200 4X30MG304CMT 4 40 200 4X40MG304CMT 4 50 200 4X50MG304CMT 5 8 100 5X8MG304CMT 5 10 100 5X10MG304CMT 5 12 100 5X12MG304CMT 5 16 100 5X16MG304CMT 5 20 100 5X20MG304CMT 5 25 100 5X25MG304CMT 5 30 100 5X30MG304CMT 5 35 100 5X35MG304CMT 5 40 100 5X40MG304CMT 5 45 100 5X45MG304CMT
continued…
GRADE 304 METRIC CSK SLOTTED METAL THREAD SCREWS continued…
Dia. Length Pack Part No. mm mm qty
5 50 100 5X50MG304CMT 5 60 100 5X60MG304CMT 5 65 100 5X65MG304CMT 5 70 100 5X70MG304CMT 5 75 100 5X75MG304CMT 5 80 100 5X80MG304CMT 6 10 100 6X10MG304CMT 6 12 100 6X12MG304CMT 6 16 100 6X16MG304CMT 6 20 100 6X20MG304CMT 6 25 100 6X25MG304CMT 6 30 100 6X30MG304CMT 6 35 100 6X35MG304CMT 6 40 100 6X40MG304CMT 6 45 100 6X45MG304CMT 6 50 100 6X50MG304CMT 6 60 50 6X60MG304CMT 6 65 50 6X65MG304CMT 6 70 50 6X70MG304CMT 6 75 50 6X75MG304CMT 6 80 50 6X80MG304CMT 6 100 50 6X100MG304CMT 8 12 100 8X12MG304CMT 8 16 100 8X16MG304CMT 8 20 100 8X20MG304CMT 8 25 100 8X25MG304CMT 8 30 100 8X30MG304CMT 8 35 100 8X35MG304CMT 8 40 100 8X40MG304CMT 8 45 100 8X45MG304CMT 8 50 100 8X50MG304CMT 8 65 50 8X65MG304CMT 8 70 50 8X70MG304CMT 8 75 50 8X75MG304CMT 8 80 50 8X80MG304CMT 8 90 50 8X90MG304CMT 8 100 50 8X100MG304CMT 10 20 100 10X20MG304CMT 10 25 100 10X25MG304CMT 10 30 100 10X30MG304CMT 10 40 100 10X40MG304CMT 10 50 100 10X50MG304CMT 10 60 50 10X60MG304CMT 10 75 50 10X75MG304CMT
FASTER ORDERINGDon’t forget to quote the part number when ordering. Quick and efficient ordering is another way we’re making your job easier.Turn to back cover for your nearest branch.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
MET
AL
THRE
AD
SCR
EWS
64 AUSTRALIA’S FASTENER SPECIALISTS
BRANCHES AUSTRALIA WIDEGRADE 316 METRIC CSK SLOTTED METAL THREAD SCREWS continued…
Dia. Length Pack Part No. mm mm qty
6 60 50 6X60MG316CMT 6 65 50 6X65MG316CMT 6 70 50 6X70MG316CMT 6 75 50 6X75MG316CMT 6 80 50 6X80MG316CMT 6 100 50 6X100MG316CMT 8 16 100 8X16MG316CMT 8 20 100 8X20MG316CMT 8 25 100 8X25MG316CMT 8 30 100 8X30MG316CMT 8 35 100 8X35MG316CMT 8 40 100 8X40MG316CMT 8 50 100 8X50MG316CMT 8 60 50 8X60MG316CMT 8 70 50 8X70MG316CMT 8 80 50 8X80MG316CMT 8 90 50 8X90MG316CMT 8 100 50 8X100MG316CMT 10 20 50 10X20MG316CMT 10 25 50 10X25MG316CMT 10 30 50 10X30MG316CMT 10 35 50 10X35MG316CMT 10 40 50 10X40MG316CMT 10 50 50 10X50MG316CMT 10 60 50 10X60MG316CMT 10 80 50 10X80MG316CMT 10 100 50 10X100MG316CMT 12 25 50 12X25MG316CMT 12 30 50 12X30MG316CMT 12 40 50 12X40MG316CMT 12 50 50 12X50MG316CMT 12 60 25 12X60MG316CMT 12 80 25 12X80MG316CMT
GRADE 304 METRIC CSK PHILLIPS METAL THREAD SCREWS
Dia. Length Pack Part No. mm mm qty
2 5 100 2X5MG304CCRMT 2 6 100 2X6MG304CCRMT 2 8 100 2X8MG304CCRMT 2 10 100 2X10MG304CCRMT 2 12 100 2X12MG304CCRMT 2 16 100 2X16MG304CCRMT 2.5 4 100 2.5X4MG304CCRMT 2.5 5 100 2.5X5MG304CCRMT 2.5 6 100 2.5X6MG304CCRMT 2.5 8 100 2.5X8MG304CCRMT 2.5 10 100 2.5X10MG304CCRMT 2.5 12 100 2.5X12MG304CCRMT 2.5 16 100 2.5X16MG304CCRMT 2.5 20 100 2.5X20MG304CCRMT 3 4 100 3X4MG304CCRMT
continued…
GRADE 316 METRIC CSK SLOTTED METAL THREAD SCREWS
Dia. Length Pack Part No. mm mm qty
2 5 100 2X5MG316CMT 2 6 100 2X6MG316CMT 2 8 100 2X8MG316CMT 2 10 100 2X10MG316CMT 2 12 100 2X12MG316CMT 2 16 100 2X16MG316CMT 2 20 100 2X20MG316CMT 2.5 5 100 2.5X5MG316CMT 2.5 6 100 2.5X6MG316CMT 2.5 8 100 2.5X8MG316CMT 2.5 10 100 2.5X10MG316CMT 2.5 12 100 2.5X12MG316CMT 2.5 16 100 2.5X16MG316CMT 2.5 20 100 2.5X20MG316CMT 3 6 100 3X6MG316CMT 3 8 100 3X8MG316CMT 3 10 100 3X10MG316CMT 3 12 100 3X12MG316CMT 3 16 100 3X16MG316CMT 3 20 100 3X20MG316CMT 3 25 100 3X25MG316CMT 4 6 100 4X6MG316CMT 4 8 100 4X8MG316CMT 4 10 100 4X10MG316CMT 4 12 100 4X12MG316CMT 4 16 100 4X16MG316CMT 4 20 100 4X20MG316CMT 4 25 100 4X25MG316CMT 4 30 100 4X30MG316CMT 4 40 100 4X40MG316CMT 4 50 100 4X50MG316CMT 5 8 100 5X8MG316CMT 5 10 100 5X10MG316CMT 5 12 100 5X12MG316CMT 5 16 100 5X16MG316CMT 5 20 100 5X20MG316CMT 5 25 100 5X25MG316CMT 5 30 100 5X30MG316CMT 5 40 100 5X40MG316CMT 5 50 100 5X50MG316CMT 5 60 100 5X60MG316CMT 5 65 100 5X65MG316CMT 5 70 100 5X70MG316CMT 5 75 100 5X75MG316CMT 5 80 100 5X80MG316CMT 5 90 100 5X90MG316CMT 6 10 100 6X10MG316CMT 6 12 100 6X12MG316CMT 6 16 100 6X16MG316CMT 6 20 100 6X20MG316CMT 6 25 100 6X25MG316CMT 6 30 100 6X30MG316CMT 6 35 100 6X35MG316CMT 6 40 100 6X40MG316CMT 6 45 100 6X45MG316CMT 6 50 100 6X50MG316CMT
continued…
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
META
L THREA
D SCREW
S65AUSTRALIA’S FASTENER SPECIALISTS
BRANCHES AUSTRALIA WIDEGRADE 304 METRIC CSK PHILLIPS METAL THREAD SCREWS continued…
Dia. Length Pack Part No. mm mm qty
3 5 100 3X5MG304CCRMT 3 6 100 3X6MG304CCRMT 3 8 100 3X8MG304CCRMT 3 10 100 3X10MG304CCRMT 3 12 100 3X12MG304CCRMT 3 16 100 3X16MG304CCRMT 3 20 100 3X20MG304CCRMT 3 25 100 3X25MG304CCRMT 3 30 100 3X30MG304CCRMT 3 40 100 3X40MG304CCRMT 3 50 100 3X50MG304CCRMT 4 6 100 4X6MG304CCRMT 4 8 100 4X8MG304CCRMT 4 10 100 4X10MG304CCRMT 4 12 100 4X12MG304CCRMT 4 16 100 4X16MG304CCRMT 4 20 100 4X20MG304CCRMT 4 25 100 4X25MG304CCRMT 4 30 100 4X30MG304CCRMT 4 35 100 4X35MG304CCRMT 4 40 100 4X40MG304CCRMT 4 50 100 4X50MG304CCRMT 4 100 100 4X100MG304CCRMT 5 6 100 5X6MG304CCRMT 5 8 100 5X8MG304CCRMT 5 10 100 5X10MG304CCRMT 5 12 100 5X12MG304CCRMT 5 16 100 5X16MG304CCRMT 5 20 100 5X20MG304CCRMT 5 25 100 5X25MG304CCRMT 5 30 100 5X30MG304CCRMT 5 35 100 5X35MG304CCRMT 5 40 100 5X40MG304CCRMT 5 50 100 5X50MG304CCRMT 5 65 50 5X65MG304CCRMT 5 75 50 5X75MG304CCRMT 6 8 100 6X8MG304CCRMT 6 10 100 6X10MG304CCRMT 6 12 100 6X12MG304CCRMT 6 16 100 6X16MG304CCRMT 6 20 100 6X20MG304CCRMT 6 25 100 6X25MG304CCRMT 6 30 100 6X30MG304CCRMT 6 35 100 6X35MG304CCRMT 6 40 100 6X40MG304CCRMT 6 45 100 6X45MG304CCRMT 6 50 100 6X50MG304CCRMT 6 60 50 6X60MG304CCRMT 6 65 50 6X65MG304CCRMT 6 75 50 6X75MG304CCRMT 8 16 100 8X16MG304CCRMT 8 20 100 8X20MG304CCRMT 8 25 100 8X25MG304CCRMT 8 30 100 8X30MG304CCRMT 8 40 100 8X40MG304CCRMT
continued…
GRADE 304 METRIC CSK PHILLIPS METAL THREAD SCREWS continued…
Dia. Length Pack Part No. mm mm qty
8 50 100 8X50MG304CCRMT 8 100 50 8X100MG304CCRMT
GRADE 316 METRIC CSK PHILLIPS METAL THREAD SCREWS
Dia. Length Pack Part No. mm mm qty
3 12 100 3X12MG316CCRMT 3 16 100 3X16MG316CCRMT 3 20 100 3X20MG316CCRMT 3 25 100 3X25MG316CCRMT 4 8 100 4X8MG316CCRMT 4 10 100 4X10MG316CCRMT 4 12 100 4X12MG316CCRMT 4 16 100 4X16MG316CCRMT 4 20 100 4X20MG316CCRMT 4 25 100 4X25MG316CCRMT 4 30 100 4X30MG316CCRMT 4 40 100 4X40MG316CCRMT 5 10 100 5X10MG316CCRMT 5 12 100 5X12MG316CCRMT 5 16 100 5X16MG316CCRMT 5 20 100 5X20MG316CCRMT 5 25 100 5X25MG316CCRMT 5 30 100 5X30MG316CCRMT 5 40 100 5X40MG316CCRMT 5 50 100 5X50MG316CCRMT 6 12 100 6X12MG316CCRMT 6 16 100 6X16MG316CCRMT 6 20 100 6X20MG316CCRMT 6 25 100 6X25MG316CCRMT 6 30 100 6X30MG316CCRMT 6 35 100 6X35MG316CCRMT 6 40 100 6X40MG316CCRMT 6 50 100 6X50MG316CCRMT 8 16 100 8X16MG316CCRMT 8 20 100 8X20MG316CCRMT 8 25 100 8X25MG316CCRMT 8 30 100 8X30MG316CCRMT 8 40 100 8X40MG316CCRMT 8 50 100 8X50MG316CCRMT 8 60 50 8X60MG316CCRMT 10 25 50 10X25MG316CCRMT 10 30 50 10X30MG316CCRMT 10 50 50 10X50MG316CCRMT
LOCAL BRANCHESWith Australia’s largest network of local specialised fastener branches there’s a Coventry Fasteners branch near you. Local branches is another way we’re making your job easier.Turn to back cover for your nearest branch.
We understand there is more to supplying fasteners than just delivering boxes. Our aim is to offer customers across Australia the most professional fastener supply service possible. Often fasteners make up only a small but important component of our customers’ requirements, so we keep the process of order and supply simple. Our friendly and professional service means you have one less problem to worry about.
visit us at www.coventryfasteners.com.au
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCH TURN TO BACK COVER FOR YOUR NEAREST BRANCH
Professional service with a smile
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
META
L THREA
D SCREW
S67AUSTRALIA’S FASTENER SPECIALISTS
SPECIALIST ADVICEGRADE 304 METRIC CHEESE SLOTTED METAL THREAD SCREWS
Dia. Length Pack Part No. mm mm qty
3 4 200 3X4MG304CHMT 3 5 200 3X5MG304CHMT 3 6 200 3X6MG304CHMT 3 8 200 3X8MG304CHMT 3 10 200 3X10MG304CHMT 3 12 200 3X12MG304CHMT 3 16 200 3X16MG304CHMT 3 20 200 3X20MG304CHMT 3 25 200 3X25MG304CHMT 3 30 200 3X30MG304CHMT 3 40 200 3X40MG304CHMT 3 50 200 3X50MG304CHMT 4 6 200 4X6MG304CHMT 4 8 200 4X8MG304CHMT 4 10 200 4X10MG304CHMT 4 12 200 4X12MG304CHMT 4 16 200 4X16MG304CHMT 4 20 200 4X20MG304CHMT 4 25 200 4X25MG304CHMT 4 30 200 4X30MG304CHMT 4 40 200 4X40MG304CHMT 4 50 200 4X50MG304CHMT 5 6 100 5X6MG304CHMT 5 8 100 5X8MG304CHMT 5 10 100 5X10MG304CHMT 5 12 100 5X12MG304CHMT 5 16 100 5X16MG304CHMT 5 20 100 5X20MG304CHMT 5 25 100 5X25MG304CHMT 5 30 100 5X30MG304CHMT 5 35 100 5X35MG304CHMT 5 40 100 5X40MG304CHMT 5 50 100 5X50MG304CHMT 5 60 100 5X60MG304CHMT 5 70 100 5X70MG304CHMT 5 80 100 5X80MG304CHMT 6 10 100 6X10MG304CHMT 6 12 100 6X12MG304CHMT 6 16 100 6X16MG304CHMT 6 20 100 6X20MG304CHMT 6 25 100 6X25MG304CHMT 6 30 100 6X30MG304CHMT 6 35 100 6X35MG304CHMT 6 40 100 6X40MG304CHMT 6 50 100 6X50MG304CHMT 6 60 50 6X60MG304CHMT 6 70 50 6X70MG304CHMT 6 80 50 6X80MG304CHMT 6 100 50 6X100MG304CHMT 8 12 100 8X12MG304CHMT 8 16 100 8X16MG304CHMT 8 20 100 8X20MG304CHMT 8 25 100 8X25MG304CHMT 8 30 100 8X30MG304CHMT 8 35 100 8X35MG304CHMT 8 40 100 8X40MG304CHMT
continued…
GRADE 304 METRIC CHEESE SLOTTED METAL THREAD SCREWS continued…
Dia. Length Pack Part No. mm mm qty
8 45 100 8X45MG304CHMT 8 50 100 8X50MG304CHMT 8 70 50 8X70MG304CHMT 8 80 50 8X80MG304CHMT 8 90 50 8X90MG304CHMT 8 100 50 8X100MG304CHMT 10 20 100 10X20MG304CHMT 10 25 100 10X25MG304CHMT 10 40 100 10X40MG304CHMT 10 50 100 10X50MG304CHMT
GRADE 316 METRIC CHEESE SLOTTED METAL THREAD SCREWS
Dia. Length Pack Part No. mm mm qty
2 5 100 2X5MG316CHMT 2 6 100 2X6MG316CHMT 2 8 100 2X8MG316CHMT 2 10 100 2X10MG316CHMT 2 12 100 2X12MG316CHMT 2 16 100 2X16MG316CHMT 2 20 100 2X20MG316CHMT 2 25 100 2X25MG316CHMT 2.5 5 100 2.5X5MG316CHMT 2.5 6 100 2.5X6MG316CHMT 2.5 8 100 2.5X8MG316CHMT 2.5 10 100 2.5X10MG316CHMT 2.5 12 100 2.5X12MG316CHMT 2.5 16 100 2.5X16MG316CHMT 2.5 20 100 2.5X20MG316CHMT 2.5 25 100 2.5X25MG316CHMT 3 6 100 3X6MG316CHMT 3 8 100 3X8MG316CHMT 3 10 100 3X10MG316CHMT 3 12 100 3X12MG316CHMT 3 16 100 3X16MG316CHMT 3 20 100 3X20MG316CHMT 3 25 100 3X25MG316CHMT 3 35 100 3X35MG316CHMT 4 6 100 4X6MG316CHMT 4 8 100 4X8MG316CHMT 4 10 100 4X10MG316CHMT 4 12 100 4X12MG316CHMT 4 16 100 4X16MG316CHMT 4 20 100 4X20MG316CHMT 4 25 100 4X25MG316CHMT 4 30 100 4X30MG316CHMT 4 40 100 4X40MG316CHMT 4 50 100 4X50MG316CHMT 4 80 100 4X80MG316CHMT 5 8 100 5X8MG316CHMT 5 10 100 5X10MG316CHMT 5 12 100 5X12MG316CHMT 5 16 100 5X16MG316CHMT 5 20 100 5X20MG316CHMT
continued…
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
MET
AL
THRE
AD
SCR
EWS
68 AUSTRALIA’S FASTENER SPECIALISTS
FAST DELIVERYGRADE 316 METRIC CHEESE SLOTTED METAL THREAD SCREWS continued…
Dia. Length Pack Part No. mm mm qty
5 25 100 5X25MG316CHMT 5 30 100 5X30MG316CHMT 5 40 100 5X40MG316CHMT 5 50 100 5X50MG316CHMT 5 60 100 5X60MG316CHMT 5 70 100 5X70MG316CHMT 5 80 100 5X80MG316CHMT 5 90 100 5X90MG316CHMT 6 10 100 6X10MG316CHMT 6 12 100 6X12MG316CHMT 6 16 100 6X16MG316CHMT 6 20 100 6X20MG316CHMT 6 25 100 6X25MG316CHMT 6 30 100 6X30MG316CHMT 6 35 100 6X35MG316CHMT 6 40 100 6X40MG316CHMT 6 50 100 6X50MG316CHMT 6 60 50 6X60MG316CHMT 6 70 50 6X70MG316CHMT 6 80 50 6X80MG316CHMT 6 90 50 6X90MG316CHMT 6 100 50 6X100MG316CHMT 8 16 100 8X16MG316CHMT 8 20 100 8X20MG316CHMT 8 25 100 8X25MG316CHMT 8 30 100 8X30MG316CHMT 8 35 100 8X35MG316CHMT 8 40 100 8X40MG316CHMT 8 50 100 8X50MG316CHMT 8 60 50 8X60MG316CHMT 8 70 50 8X70MG316CHMT 8 80 50 8X80MG316CHMT 10 20 50 10X20MG316CHMT 10 25 50 10X25MG316CHMT 10 30 50 10X30MG316CHMT 10 35 50 10X35MG316CHMT 10 40 50 10X40MG316CHMT 10 50 50 10X50MG316CHMT
GRADE 304 METRIC MUSHROOM PHILLIPS METAL THREAD SCREWS
Dia. Length Pack Part No. mm mm qty
5 20 100 5X20MG304MHCRMT 5 25 100 5X25MG304MHCRMT 6 25 100 6X25MG304MHCRMT 6 30 100 6X30MG304MHCRMT 6 40 100 6X40MG304MHCRMT
GRADE 304 BSW PAN PHILLIPS METAL THREAD SCREWS
Dia. Length Pack Part No. inch inch qty
¹⁄₈ ¹⁄₂ 100 18X12BWG304PCRMT ¹⁄₈ ³⁄₄ 100 18X34BWG304PCRMT ¹⁄₈ 1 100 18X1BWG304PCRMT ³⁄₁₆ ¹⁄₄ 100 316X14BWG304PCRMT ³⁄₁₆ ³⁄₈ 100 316X38BWG304PCRMT ³⁄₁₆ ¹⁄₂ 100 316X12BWG304PCRMT ³⁄₁₆ ⁵⁄₈ 100 316X58BWG304PCRMT ³⁄₁₆ ³⁄₄ 100 316X34BWG304PCRMT ³⁄₁₆ 1 100 316X1BWG304PCRMT ³⁄₁₆ 1 ¹⁄₄ 100 316X1.14BWG304PCRMT ³⁄₁₆ 1 ¹⁄₂ 100 316X1.12BWG304PCRMT ³⁄₁₆ 1 ³⁄₄ 100 316X1.34BWG304PCRMT ³⁄₁₆ 2 100 316X2BWG304PCRMT ³⁄₁₆ 2 ¹⁄₂ 100 316X2.12BWG304PCRMT ³⁄₁₆ 3 100 316X3BWG304PCRMT ¹⁄₄ ³⁄₈ 100 14X38BWG304PCRMT ¹⁄₄ ¹⁄₂ 100 14X12BWG304PCRMT ¹⁄₄ ⁵⁄₈ 100 14X58BWG304PCRMT ¹⁄₄ ³⁄₄ 100 14X34BWG304PCRMT ¹⁄₄ 1 100 14X1BWG304PCRMT ¹⁄₄ 1 ¹⁄₄ 100 14X1.14BWG304PCRMT ¹⁄₄ 1 ¹⁄₂ 100 14X1.12BWG304PCRMT ¹⁄₄ 1 ³⁄₄ 100 14X1.34BWG304PCRMT ¹⁄₄ 2 100 14X2BWG304PCRMT ¹⁄₄ 2 ¹⁄₂ 50 14X2.12BWG304PCRMT ¹⁄₄ 3 50 14X3BWG304PCRMT ¹⁄₄ 3 ¹⁄₂ 50 14X3.12BWG304PCRMT ¹⁄₄ 4 50 14X4BWG304PCRMT ⁵⁄₁₆ ³⁄₄ 100 516X34BWG304PCRMT ⁵⁄₁₆ 1 100 516X1BWG304PCRMT ⁵⁄₁₆ 1 ¹⁄₂ 100 516X1.12BWG304PCRMT ⁵⁄₁₆ 1 ³⁄₄ 100 516X1.34BWG304PCRMT ⁵⁄₁₆ 2 100 516X2BWG304PCRMT ⁵⁄₁₆ 2 ¹⁄₂ 50 516X2.12BWG304PCRMT ⁵⁄₁₆ 3 50 516X3BWG304PCRMT
GRADE 316 BSW PAN PHILLIPS METAL THREAD SCREWS
Dia. Length Pack Part No. inch inch qty
³⁄₁₆ ¹⁄₂ 100 316X12BWG316PCRMT ³⁄₁₆ ³⁄₄ 100 316X34BWG316PCRMT ³⁄₁₆ 1 100 316X1BWG316PCRMT ³⁄₁₆ 1 ¹⁄₄ 100 316X1.14BWG316PCRMT ³⁄₁₆ 1 ¹⁄₂ 100 316X1.12BWG316PCRMT
continued…
GET TO KNOW USCoventry Fasteners is part of the publicly listed Australian company Coventry Group Ltd with a proud history of servicing mining, construction and manufacturing industries. Find out more at www.coventryfasteners.com.au
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
META
L THREA
D SCREW
S69AUSTRALIA’S FASTENER SPECIALISTS
FAST DELIVERYGRADE 304 BSW CSK SLOTTED METAL THREAD SCREWS continued…
Dia. Length Pack Part No. inch inch qty
¹⁄₄ 3 50 14X3BWG304CMT ¹⁄₄ 4 50 14X4BWG304CMT ⁵⁄₁₆ ¹⁄₂ 100 516X12BWG304CMT ⁵⁄₁₆ ⁵⁄₈ 100 516X58BWG304CMT ⁵⁄₁₆ ³⁄₄ 100 516X34BWG304CMT ⁵⁄₁₆ 1 100 516X1BWG304CMT ⁵⁄₁₆ 1 ¹⁄₄ 100 516X1.14BWG304CMT ⁵⁄₁₆ 1 ¹⁄₂ 100 516X1.12BWG304CMT ⁵⁄₁₆ 2 100 516X2BWG304CMT ⁵⁄₁₆ 2 ¹⁄₂ 50 516X2.12BWG304CMT ⁵⁄₁₆ 3 50 516X3BWG304CMT ⁵⁄₁₆ 4 50 516X4BWG304CMT ³⁄₈ ³⁄₄ 100 38X34BWG304CMT ³⁄₈ 1 100 38X1BWG304CMT ³⁄₈ 1 ¹⁄₄ 100 38X1.14BWG304CMT ³⁄₈ 1 ¹⁄₂ 100 38X1.12BWG304CMT ³⁄₈ 1 ³⁄₄ 100 38X1.34BWG304CMT ³⁄₈ 2 100 38X2BWG304CMT ³⁄₈ 2 ¹⁄₂ 50 38X2.12BWG304CMT ³⁄₈ 3 50 38X3BWG304CMT ³⁄₈ 3 ¹⁄₂ 50 38X3.12BWG304CMT ³⁄₈ 4 50 38X4BWG304CMT ¹⁄₂ 1 ¹⁄₄ 50 12X1.14BWG304CMT
GRADE 316 BSW CSK SLOTTED METAL THREAD SCREWS
Dia. Length Pack Part No. inch inch qty
³⁄₁₆ ¹⁄₄ 100 316X14BWG316CMT ³⁄₁₆ ³⁄₈ 100 316X38BWG316CMT ³⁄₁₆ ¹⁄₂ 100 316X12BWG316CMT ³⁄₁₆ ⁵⁄₈ 100 316X58BWG316CMT ³⁄₁₆ ³⁄₄ 100 316X34BWG316CMT ³⁄₁₆ 1 100 316X1BWG316CMT ³⁄₁₆ 1 ¹⁄₄ 100 316X1.14BWG316CMT ³⁄₁₆ 1 ¹⁄₂ 100 316X1.12BWG316CMT ³⁄₁₆ 2 100 316X2BWG316CMT ³⁄₁₆ 2 ¹⁄₂ 100 316X2.12BWG316CMT ³⁄₁₆ 3 100 316X3BWG316CMT ¹⁄₄ ¹⁄₂ 100 14X12BWG316CMT ¹⁄₄ ⁵⁄₈ 100 14X58BWG316CMT ¹⁄₄ ³⁄₄ 100 14X34BWG316CMT ¹⁄₄ 1 100 14X1BWG316CMT ¹⁄₄ 1 ¹⁄₄ 100 14X1.14BWG316CMT ¹⁄₄ 1 ¹⁄₂ 100 14X1.12BWG316CMT ¹⁄₄ 1 ³⁄₄ 100 14X1.34BWG316CMT ¹⁄₄ 2 100 14X2BWG316CMT ¹⁄₄ 2 ¹⁄₂ 50 14X2.12BWG316CMT ¹⁄₄ 3 50 14X3BWG316CMT ⁵⁄₁₆ ³⁄₄ 100 516X34BWG316CMT ⁵⁄₁₆ 1 100 516X1BWG316CMT ⁵⁄₁₆ 1 ¹⁄₄ 100 516X1.14BWG316CMT ⁵⁄₁₆ 1 ¹⁄₂ 100 516X1.12BWG316CMT
continued…
GRADE 316 BSW PAN PHILLIPS METAL THREAD SCREWS continued…
Dia. Length Pack Part No. inch inch qty
³⁄₁₆ 2 100 316X2BWG316PCRMT ³⁄₁₆ 2 ¹⁄₂ 100 316X2.12BWG316PCRMT ³⁄₁₆ 3 100 316X3BWG316PCRMT ¹⁄₄ ³⁄₄ 100 14X34BWG316PCRMT ¹⁄₄ 1 100 14X1BWG316PCRMT ¹⁄₄ 1 ¹⁄₄ 100 14X1.14BWG316PCRMT ¹⁄₄ 1 ¹⁄₂ 100 14X1.12BWG316PCRMT ¹⁄₄ 2 100 14X2BWG316PCRMT ¹⁄₄ 3 50 14X3BWG316PCRMT
GRADE 304 BSW CSK SLOTTED METAL THREAD SCREWS
Dia. Length Pack Part No. inch inch qty
¹⁄₈ ¹⁄₄ 200 18X14BWG304CMT ¹⁄₈ ³⁄₈ 200 18X38BWG304CMT ¹⁄₈ ¹⁄₂ 200 18X12BWG304CMT ¹⁄₈ ⁵⁄₈ 200 18X58BWG304CMT ¹⁄₈ ³⁄₄ 200 18X34BWG304CMT ¹⁄₈ 1 200 18X1BWG304CMT ¹⁄₈ 1 ¹⁄₄ 200 18X1.14BWG304CMT ¹⁄₈ 1 ¹⁄₂ 200 18X1.12BWG304CMT ¹⁄₈ 2 200 18X2BWG304CMT ⁵⁄₃₂ ¹⁄₄ 200 532X14BWG304CMT ⁵⁄₃₂ ³⁄₈ 200 532X38BWG304CMT ⁵⁄₃₂ ¹⁄₂ 200 532X12BWG304CMT ⁵⁄₃₂ ⁵⁄₈ 200 532X58BWG304CMT ⁵⁄₃₂ ³⁄₄ 200 532X34BWG304CMT ⁵⁄₃₂ 1 200 532X1BWG304CMT ⁵⁄₃₂ 1 ¹⁄₄ 200 532X1.14BWG304CMT ⁵⁄₃₂ 1 ¹⁄₂ 200 532X1.12BWG304CMT ⁵⁄₃₂ 2 200 532X2BWG304CMT ³⁄₁₆ ¹⁄₄ 100 316X14BWG304CMT ³⁄₁₆ ³⁄₈ 100 316X38BWG304CMT ³⁄₁₆ ¹⁄₂ 100 316X12BWG304CMT ³⁄₁₆ ⁵⁄₈ 100 316X58BWG304CMT ³⁄₁₆ ³⁄₄ 100 316X34BWG304CMT ³⁄₁₆ 1 100 316X1BWG304CMT ³⁄₁₆ 1 ¹⁄₄ 100 316X1.14BWG304CMT ³⁄₁₆ 1 ¹⁄₂ 100 316X1.12BWG304CMT ³⁄₁₆ 1 ³⁄₄ 100 316X1.34BWG304CMT ³⁄₁₆ 2 100 316X2BWG304CMT ³⁄₁₆ 2 ¹⁄₂ 100 316X2.12BWG304CMT ³⁄₁₆ 3 100 316X3BWG304CMT ¹⁄₄ ³⁄₈ 100 14X38BWG304CMT ¹⁄₄ ¹⁄₂ 100 14X12BWG304CMT ¹⁄₄ ⁵⁄₈ 100 14X58BWG304CMT ¹⁄₄ ³⁄₄ 100 14X34BWG304CMT ¹⁄₄ 1 100 14X1BWG304CMT ¹⁄₄ 1 ¹⁄₄ 100 14X1.14BWG304CMT ¹⁄₄ 1 ¹⁄₂ 100 14X1.12BWG304CMT ¹⁄₄ 1 ³⁄₄ 100 14X1.34BWG304CMT ¹⁄₄ 2 100 14X2BWG304CMT ¹⁄₄ 2 ¹⁄₄ 50 14X2.14BWG304CMT ¹⁄₄ 2 ¹⁄₂ 50 14X2.12BWG304CMT
continued…
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
MET
AL
THRE
AD
SCR
EWS
70 AUSTRALIA’S FASTENER SPECIALISTS
FRIENDLY SERVICEGRADE 304 BSW CSK PHILLIPS METAL THREAD SCREWS continued…
Dia. Length Pack Part No. inch inch qty
⁵⁄₁₆ 1 100 516X1BWG304CCRMT ⁵⁄₁₆ 1 ¹⁄₄ 100 516X1.14BWG304CCRMT ⁵⁄₁₆ 1 ¹⁄₂ 100 516X1.12BWG304CCRMT ⁵⁄₁₆ 2 100 516X2BWG304CCRMT ⁵⁄₁₆ 2 ¹⁄₂ 50 516X2.12BWG304CCRMT ⁵⁄₁₆ 3 50 516X3BWG304CCRMT
GRADE 316 BSW CSK PHILLIPS METAL THREAD SCREWS
Dia. Length Pack Part No. inch inch qty
³⁄₁₆ ³⁄₈ 100 316X38BWG316CCRMT ³⁄₁₆ ¹⁄₂ 100 316X12BWG316CCRMT ³⁄₁₆ ³⁄₄ 100 316X34BWG316CCRMT ³⁄₁₆ 1 100 316X1BWG316CCRMT ³⁄₁₆ 1 ¹⁄₄ 100 316X1.14BWG316CCRMT ³⁄₁₆ 1 ¹⁄₂ 100 316X1.12BWG316CCRMT ³⁄₁₆ 1 ³⁄₄ 100 316X1.34BWG316CCRMT ³⁄₁₆ 2 100 316X2BWG316CCRMT ³⁄₁₆ 2 ¹⁄₂ 100 316X2.12BWG316CCRMT ³⁄₁₆ 3 100 316X3BWG316CCRMT ¹⁄₄ ³⁄₄ 100 14X34BWG316CCRMT ¹⁄₄ 1 100 14X1BWG316CCRMT ¹⁄₄ 1 ¹⁄₄ 100 14X1.14BWG316CCRMT ¹⁄₄ 1 ¹⁄₂ 100 14X1.12BWG316CCRMT ¹⁄₄ 2 100 14X2BWG316CCRMT
GRADE 304 BSW ROUND SLOTTED METAL THREAD SCREWS
Dia. Length Pack Part No. inch inch qty
¹⁄₈ ¹⁄₄ 200 18X14BWG304RHMT ¹⁄₈ ³⁄₈ 200 18X38BWG304RHMT ¹⁄₈ ¹⁄₂ 200 18X12BWG304RHMT ¹⁄₈ ⁵⁄₈ 200 18X58BWG304RHMT ¹⁄₈ ³⁄₄ 200 18X34BWG304RHMT ¹⁄₈ 1 200 18X1BWG304RHMT ¹⁄₈ 1 ¹⁄₄ 200 18X1.14BWG304RHMT ¹⁄₈ 1 ¹⁄₂ 200 18X1.12BWG304RHMT ¹⁄₈ 2 200 18X2BWG304RHMT ⁵⁄₃₂ ¹⁄₄ 200 532X14BWG304RHMT ⁵⁄₃₂ ³⁄₈ 200 532X38BWG304RHMT ⁵⁄₃₂ ¹⁄₂ 200 532X12BWG304RHMT ⁵⁄₃₂ ⁵⁄₈ 200 532X58BWG304RHMT ⁵⁄₃₂ ³⁄₄ 200 532X34BWG304RHMT ⁵⁄₃₂ 1 200 532X1BWG304RHMT ⁵⁄₃₂ 1 ¹⁄₄ 200 532X1.14BWG304RHMT ⁵⁄₃₂ 1 ¹⁄₂ 200 532X1.12BWG304RHMT ⁵⁄₃₂ 2 200 532X2BWG304RHMT ³⁄₁₆ ¹⁄₄ 100 316X14BWG304RHMT ³⁄₁₆ ³⁄₈ 100 316X38BWG304RHMT ³⁄₁₆ ¹⁄₂ 100 316X12BWG304RHMT ³⁄₁₆ ⁵⁄₈ 100 316X58BWG304RHMT ³⁄₁₆ ³⁄₄ 100 316X34BWG304RHMT ³⁄₁₆ 1 100 316X1BWG304RHMT
continued…
GRADE 316 BSW CSK SLOTTED METAL THREAD SCREWS continued…
Dia. Length Pack Part No. inch inch qty
⁵⁄₁₆ 2 100 516X2BWG316CMT ⁵⁄₁₆ 2 ¹⁄₂ 50 516X2.12BWG316CMT ⁵⁄₁₆ 3 50 516X3BWG316CMT ³⁄₈ ³⁄₄ 50 38X34BWG316CMT ³⁄₈ 1 50 38X1BWG316CMT ³⁄₈ 1 ¹⁄₄ 50 38X1.14BWG316CMT ³⁄₈ 1 ¹⁄₂ 50 38X1.12BWG316CMT ³⁄₈ 2 50 38X2BWG316CMT ³⁄₈ 2 ¹⁄₂ 50 38X2.12BWG316CMT ³⁄₈ 3 50 38X3BWG316CMT
GRADE 304 BSW CSK PHILLIPS METAL THREAD SCREWS
Dia. Length Pack Part No. inch inch qty
¹⁄₈ ¹⁄₄ 100 18X14BWG304CCRMT ⁵⁄₃₂ ¹⁄₄ 100 532X14BWG304CCRMT ⁵⁄₃₂ ³⁄₈ 100 532X38BWG304CCRMT ⁵⁄₃₂ ¹⁄₂ 100 532X12BWG304CCRMT ⁵⁄₃₂ 1 100 532X1BWG304CCRMT ³⁄₁₆ ¹⁄₄ 100 316X14BWG304CCRMT ³⁄₁₆ ³⁄₈ 100 316X38BWG304CCRMT ³⁄₁₆ ¹⁄₂ 100 316X12BWG304CCRMT ³⁄₁₆ ⁵⁄₈ 100 316X58BWG304CCRMT ³⁄₁₆ ³⁄₄ 100 316X34BWG304CCRMT ³⁄₁₆ 1 100 316X1BWG304CCRMT ³⁄₁₆ 1 ¹⁄₄ 100 316X1.14BWG304CCRMT ³⁄₁₆ 1 ¹⁄₂ 100 316X1.12BWG304CCRMT ³⁄₁₆ 1 ³⁄₄ 100 316X1.34BWG304CCRMT ³⁄₁₆ 2 100 316X2BWG304CCRMT ³⁄₁₆ 2 ¹⁄₂ 100 316X2.12BWG304CCRMT ³⁄₁₆ 3 100 316X3BWG304CCRMT ¹⁄₄ ¹⁄₂ 100 14X12BWG304CCRMT ¹⁄₄ ⁵⁄₈ 100 14X58BWG304CCRMT ¹⁄₄ ³⁄₄ 100 14X34BWG304CCRMT ¹⁄₄ 1 100 14X1BWG304CCRMT ¹⁄₄ 1 ¹⁄₄ 100 14X1.14BWG304CCRMT ¹⁄₄ 1 ¹⁄₂ 100 14X1.12BWG304CCRMT ¹⁄₄ 1 ³⁄₄ 100 14X1.34BWG304CCRMT ¹⁄₄ 2 100 14X2BWG304CCRMT ¹⁄₄ 2 ¹⁄₂ 50 14X2.12BWG304CCRMT ¹⁄₄ 3 50 14X3BWG304CCRMT ¹⁄₄ 4 50 14X4BWG304CCRMT ⁵⁄₁₆ ³⁄₄ 100 516X34BWG304CCRMT
continued…
CAN’T FIND IT?Can’t find what you’re looking for? The friendly team at your local Coventry Fasteners branch can help. Personal service is another way we’re making your job easier.Turn to back cover for your nearest branch.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
META
L THREA
D SCREW
S71AUSTRALIA’S FASTENER SPECIALISTS
FRIENDLY SERVICEGRADE 316 BSW ROUND SLOTTED METAL THREAD SCREWS continued…
Dia. Length Pack Part No. inch inch qty
¹⁄₄ ¹⁄₂ 100 14X12BWG316RHMT ¹⁄₄ ⁵⁄₈ 100 14X58BWG316RHMT ¹⁄₄ ³⁄₄ 100 14X34BWG316RHMT ¹⁄₄ 1 100 14X1BWG316RHMT ¹⁄₄ 1 ¹⁄₄ 100 14X1.14BWG316RHMT ¹⁄₄ 1 ¹⁄₂ 100 14X1.12BWG316RHMT ¹⁄₄ 2 100 14X2BWG316RHMT ¹⁄₄ 2 ¹⁄₂ 50 14X2.12BWG316RHMT ¹⁄₄ 3 50 14X3BWG316RHMT ¹⁄₄ 4 50 14X4BWG316RHMT ⁵⁄₁₆ ³⁄₄ 100 516X34BWG316RHMT ⁵⁄₁₆ 1 100 516X1BWG316RHMT ⁵⁄₁₆ 1 ¹⁄₄ 100 516X1.14BWG316RHMT ⁵⁄₁₆ 1 ¹⁄₂ 100 516X1.12BWG316RHMT ⁵⁄₁₆ 2 ¹⁄₂ 50 516X2.12BWG316RHMT ⁵⁄₁₆ 3 50 516X3BWG316RHMT ³⁄₈ ³⁄₄ 50 38X34BWG316RHMT ³⁄₈ 1 50 38X1BWG316RHMT ³⁄₈ 1 ¹⁄₄ 50 38X1.14BWG316RHMT ³⁄₈ 2 50 38X2BWG316RHMT
GRADE 304 BSW MUSHROOM PHILLIPS METAL THREAD SCREWS
Dia. Length Pack Part No. inch inch qty
³⁄₁₆ ¹⁄₂ 100 316X12BWG304MHCRMT ³⁄₁₆ ⁵⁄₈ 100 316X58BWG304MHCRMT ³⁄₁₆ ³⁄₄ 100 316X34BWG304MHCRMT ³⁄₁₆ 1 100 316X1BWG304MHCRMT ³⁄₁₆ 1 ¹⁄₄ 100 316X1.14BWG304MHCRMT ³⁄₁₆ 1 ¹⁄₂ 100 316X1.12BWG304MHCRMT ¹⁄₄ ¹⁄₂ 100 14X12BWG304MHCRMT ¹⁄₄ ³⁄₄ 100 14X34BWG304MHCRMT ¹⁄₄ 1 100 14X1BWG304MHCRMT
GRADE 304 UNC PAN PHILLIPS METAL THREAD SCREWS
Dia. Length Pack Part No. inch inch qty
2-56 ³⁄₁₆ 100 2-56X316NCG304PCRMT 2-56 ¹⁄₄ 100 2-56X14NCG304PCRMT 2-56 ³⁄₈ 100 2-56X38NCG304PCRMT 2-56 ¹⁄₂ 100 2-56X12NCG304PCRMT 2-56 ⁵⁄₈ 100 2-56X58NCG304PCRMT 2-56 ³⁄₄ 100 2-56X34NCG304PCRMT 4-40 ³⁄₁₆ 100 4-40X316NCG304PCRMT 4-40 ¹⁄₄ 100 4-40X14NCG304PCRMT 4-40 ⁵⁄₁₆ 100 4-40X516NCG304PCRMT 4-40 ³⁄₈ 100 4-40X38NCG304PCRMT 4-40 ¹⁄₂ 100 4-40X12NCG304PCRMT 4-40 ⁵⁄₈ 100 4-40X58NCG304PCRMT 4-40 ³⁄₄ 100 4-40X34NCG304PCRMT 4-40 1 100 4-40X1NCG304PCRMT 6-32 ³⁄₁₆ 100 6-32X316NCG304PCRMT
continued…
GRADE 304 BSW ROUND SLOTTED METAL THREAD SCREWS continued…
Dia. Length Pack Part No. inch inch qty
³⁄₁₆ 1 ¹⁄₄ 100 316X1.14BWG304RHMT ³⁄₁₆ 1 ¹⁄₂ 100 316X1.12BWG304RHMT ³⁄₁₆ 1 ³⁄₄ 100 316X1.34BWG304RHMT ³⁄₁₆ 2 100 316X2BWG304RHMT ³⁄₁₆ 2 ¹⁄₂ 100 316X2.12BWG304RHMT ³⁄₁₆ 3 100 316X3BWG304RHMT ¹⁄₄ ³⁄₈ 100 14X38BWG304RHMT ¹⁄₄ ¹⁄₂ 100 14X12BWG304RHMT ¹⁄₄ ⁵⁄₈ 100 14X58BWG304RHMT ¹⁄₄ ³⁄₄ 100 14X34BWG304RHMT ¹⁄₄ 1 100 14X1BWG304RHMT ¹⁄₄ 1 ¹⁄₄ 100 14X1.14BWG304RHMT ¹⁄₄ 1 ¹⁄₂ 100 14X1.12BWG304RHMT ¹⁄₄ 1 ³⁄₄ 100 14X1.34BWG304RHMT ¹⁄₄ 2 100 14X2BWG304RHMT ¹⁄₄ 2 ¹⁄₄ 50 14X2.14BWG304RHMT ¹⁄₄ 2 ¹⁄₂ 50 14X2.12BWG304RHMT ¹⁄₄ 3 50 14X3BWG304RHMT ¹⁄₄ 4 50 14X4BWG304RHMT ⁵⁄₁₆ ¹⁄₂ 100 516X12BWG304RHMT ⁵⁄₁₆ ⁵⁄₈ 100 516X58BWG304RHMT ⁵⁄₁₆ ³⁄₄ 100 516X34BWG304RHMT ⁵⁄₁₆ 1 100 516X1BWG304RHMT ⁵⁄₁₆ 1 ¹⁄₄ 100 516X1.14BWG304RHMT ⁵⁄₁₆ 1 ¹⁄₂ 100 516X1.12BWG304RHMT ⁵⁄₁₆ 1 ³⁄₄ 100 516X1.34BWG304RHMT ⁵⁄₁₆ 2 100 516X2BWG304RHMT ⁵⁄₁₆ 2 ¹⁄₂ 50 516X2.12BWG304RHMT ⁵⁄₁₆ 3 50 516X3BWG304RHMT ⁵⁄₁₆ 4 50 516X4BWG304RHMT ³⁄₈ ¹⁄₂ 100 38X12BWG304RHMT ³⁄₈ ³⁄₄ 100 38X34BWG304RHMT ³⁄₈ 1 100 38X1BWG304RHMT ³⁄₈ 1 ¹⁄₄ 100 38X1.14BWG304RHMT ³⁄₈ 1 ¹⁄₂ 100 38X1.12BWG304RHMT ³⁄₈ 2 100 38X2BWG304RHMT ³⁄₈ 2 ¹⁄₂ 50 38X2.12BWG304RHMT ³⁄₈ 3 50 38X3BWG304RHMT ³⁄₈ 4 50 38X4BWG304RHMT
GRADE 316 BSW ROUND SLOTTED METAL THREAD SCREWS
Dia. Length Pack Part No. inch inch qty
³⁄₁₆ ¹⁄₄ 100 316X14BWG316RHMT ³⁄₁₆ ³⁄₈ 100 316X38BWG316RHMT ³⁄₁₆ ¹⁄₂ 100 316X12BWG316RHMT ³⁄₁₆ ⁵⁄₈ 100 316X58BWG316RHMT ³⁄₁₆ ³⁄₄ 100 316X34BWG316RHMT ³⁄₁₆ 1 100 316X1BWG316RHMT ³⁄₁₆ 1 ¹⁄₄ 100 316X1.14BWG316RHMT ³⁄₁₆ 1 ¹⁄₂ 100 316X1.12BWG316RHMT ³⁄₁₆ 2 100 316X2BWG316RHMT ³⁄₁₆ 2 ¹⁄₂ 100 316X2.12BWG316RHMT ³⁄₁₆ 3 100 316X3BWG316RHMT
continued…
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
MET
AL
THRE
AD
SCR
EWS
72 AUSTRALIA’S FASTENER SPECIALISTS
HUGE RANGEGRADE 304 UNC PAN PHILLIPS METAL THREAD SCREWS continued…
Dia. Length Pack Part No. inch inch qty
6-32 ¹⁄₄ 100 6-32X14NCG304PCRMT 6-32 ⁵⁄₁₆ 100 6-32X516NCG304PCRMT 6-32 ³⁄₈ 100 6-32X38NCG304PCRMT 6-32 ¹⁄₂ 100 6-32X12NCG304PCRMT 6-32 ⁵⁄₈ 100 6-32X58NCG304PCRMT 6-32 ³⁄₄ 100 6-32X34NCG304PCRMT 6-32 1 100 6-32X1NCG304PCRMT 6-32 1 ¹⁄₄ 100 6-32X1.14NCG304PCRMT 6-32 1 ¹⁄₂ 100 6-32X1.12NCG304PCRMT 6-32 2 100 6-32X2NCG304PCRMT 8-32 ¹⁄₄ 100 8-32X14NCG304PCRMT 8-32 ³⁄₈ 100 8-32X38NCG304PCRMT 8-32 ¹⁄₂ 100 8-32X12NCG304PCRMT 8-32 ⁵⁄₈ 100 8-32X58NCG304PCRMT 8-32 ³⁄₄ 100 8-32X34NCG304PCRMT 8-32 1 100 8-32X1NCG304PCRMT 8-32 1 ¹⁄₄ 100 8-32X1.14NCG304CRMT 8-32 1 ¹⁄₂ 100 8-32X1.12NCG304CRMT 8-32 1 ³⁄₄ 100 8-32X1.34NCG304PCRMT 8-32 2 100 8-32X2NCG304PCRMT
GRADE 304 UNC CSK PHILLIPS METAL THREAD SCREWS
Dia. Length Pack Part No. inch inch qty
2-56 ³⁄₁₆ 100 2-56X316NCG304CCRMT 2-56 ¹⁄₄ 100 2-56X14NCG304CCRMT 2-56 ³⁄₈ 100 2-56X38NCG304CCRMT 2-56 ¹⁄₂ 100 2-56X12NCG304CCRMT 2-56 ⁵⁄₈ 100 2-56X58NCG304CCRMT 4-40 ¹⁄₄ 100 4-40X14NCG304CCRMT 4-40 ⁵⁄₁₆ 100 4-40X516NCG304CCRMT 4-40 ³⁄₈ 100 4-40X38NCG304CCRMT 4-40 ¹⁄₂ 100 4-40X12NCG304CCRMT 4-40 ⁵⁄₈ 100 4-40X58NCG304CCRMT 4-40 ³⁄₄ 100 4-40X34NCG304CCRMT 4-40 1 100 4-40X1NCG304CCRMT 6-32 ¹⁄₄ 100 6-32X14NCG304CCRMT 6-32 ⁵⁄₁₆ 100 6-32X516NCG304CCRMT 6-32 ³⁄₈ 100 6-32X38NCG304CCRMT 6-32 ¹⁄₂ 100 6-32X12NCG304CCRMT 6-32 ⁵⁄₈ 100 6-32X58NCG304CCRMT 6-32 ³⁄₄ 100 6-32X34NCG304CCRMT 6-32 1 100 6-32X1NCG304CCRMT 6-32 1 ¹⁄₄ 100 6-32X1.14NCG304CCRMT 6-32 1 ¹⁄₂ 100 6-32X1.12NCG304CCRMT 6-32 2 100 6-32X2NCG304CCRMT 8-32 ¹⁄₄ 100 8-32X14NCG304CCRMT 8-32 ³⁄₈ 100 8-32X38NCG304CCRMT 8-32 ¹⁄₂ 100 8-32X12NCG304CCRMT 8-32 ⁵⁄₈ 100 8-32X58NCG304CCRMT 8-32 ³⁄₄ 100 8-32X34NCG304CCRMT 8-32 1 100 8-32X1NCG304CCRMT 8-32 1 ¹⁄₄ 100 8-32X1.14NCG304CCRMT 8-32 1 ¹⁄₂ 100 8-32X1.12NCG304CCRMT
continued…
GRADE 304 UNC CSK PHILLIPS METAL THREAD SCREWS continued…
Dia. Length Pack Part No. inch inch qty
8-32 2 100 8-32X2NCG304CCRMT 12-24 ¹⁄₂ 100 12-24X12NCG304CCRMT
GRADE 304 UNF PAN PHILLIPS METAL THREAD SCREWS
Dia. Length Pack Part No. inch inch qty
10-32 ¹⁄₄ 100 10-32X14NFG304PCRMT 10-32 ³⁄₈ 100 10-32X38NFG304PCRMT 10-32 ¹⁄₂ 100 10-32X12NFG304PCRMT 10-32 ⁵⁄₈ 100 10-32X58NFG304PCRMT 10-32 ³⁄₄ 100 10-32X34NFG304PCRMT 10-32 1 100 10-32X1NFG304PCRMT 10-32 1 ¹⁄₄ 100 10-32X1.14NFG304PCRMT 10-32 1 ¹⁄₂ 100 10-32X1.12NFG304PCRMT 10-32 2 100 10-32X2NFG304PCRMT
GRADE 304 UNF CSK PHILLIPS METAL THREAD SCREWS
Dia. Length Pack Part No. inch inch qty
10-32 ³⁄₈ 100 10-32X38NFG304CCRMT 10-32 ¹⁄₂ 100 10-32X12NFG304CCRMT 10-32 ⁵⁄₈ 100 10-32X58NFG304CCRMT 10-32 ³⁄₄ 100 10-32X34NFG304CCRMT 10-32 1 100 10-32X1NFG304CCRMT 10-32 1 ¹⁄₄ 100 10-32X1.14NFG304CCRMT 10-32 1 ¹⁄₂ 100 10-32X1.12NFG304CCRMT 10-32 2 100 10-32X2NFG304CCRMT
LOOKING FOR CONSTRUCTIONOR INDUSTRIAL FASTENERS?
Industrial and Construction fastener catalogues now available
from your nearest branch.
73
PAN PHILLIPS SELF TAPPING SCREWS/COUNTERSUNK PHILLIPS SELF TAPPINSCREWS/COUNTERSUNK PHILLIPS WOODSCREWS/COUNTERSUNK SLOTTEWOODSCREWS/PAN PHILLIPS SELF TAPPING SCREWS/COUNTERSUNK PHILLIPSELF TAPPING SCREWS/COUNTERSUNK PHILLIPS WOODSCREWS/PAN PHILLIPSELF TAPPING SCREWS/COUNTERSUNK PHILLIPS SELF TAPPING SCREWSCOUNTERSUNK PHILLIPS WOODSCREWS/COUNTERSUNK SLOTTED WOOSCREWS/PAN PHILLIPS SELF TAPPING SCREWS/COUNTERSUNK PHILLIPS SELTAPPING SCREWS/COUNTERSUNK PHILLIPS WOODSCREWS/SELF TAPPINSCREWS/COUNTERSUNK PHILLIPS WOODSCREWS/PAN PHILLIPS SELF TAPPINSELF TAPPING AND
WOODSCREWS
HILLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLIIIIIIIIIPS SELF TAPPING SCREWS/COUNTERSUNK PHILLIPS SEL
SELF
TA
PPIN
G A
ND
WO
OD
SCRE
WS
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
74 AUSTRALIA’S FASTENER SPECIALISTS
BEST VALUE
Contact your local Coventry Fasteners branch for more information on this product (see back of catalogue for your nearest branch). WANT TO KNOW MORE?
WHY WE STOCK IT
Committed to stainless steel fasteners.With the largest range and high quality standards, James Glen is the stainless steel fastener brand you can rely on. This is supported by James Glen’s ongoing commitment to expanding its stainless steel product range. Every product is manufactured to the same high standard of quality you would expect from this well known brand. For more information about James Glen, including product training and technical manuals, visit www.jamesglen.com.au. Giving you more of a choice – just another way we’re making your job easier.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SELF TAPPIN
G A
ND
WO
OD
SCREWS
75AUSTRALIA’S FASTENER SPECIALISTS
BEST VALUESelf Tapping Screws
GRADE 304 PAN PHILLIPS SELF TAPPING SCREWS – TYPE AB
Dia. Length Pack Part No. gauge inch qty
2 ¹⁄₄ 200 2X14G304PCRST 2 ³⁄₈ 200 2X38G304PCRST 2 ¹⁄₂ 200 2X12G304PCRST 4 ¹⁄₄ 200 4X14G304PCRST 4 ³⁄₈ 200 4X38G304PCRST 4 ¹⁄₂ 200 4X12G304PCRST 4 ⁵⁄₈ 200 4X58G304PCRST 4 ³⁄₄ 200 4X34G304PCRST 4 1 200 4X1G304PCRST 6 ¹⁄₄ 200 6X14G304PCRST 6 ³⁄₈ 200 6X38G304PCRST 6 ¹⁄₂ 200 6X12G304PCRST 6 ⁵⁄₈ 200 6X58G304PCRST 6 ³⁄₄ 200 6X34G304PCRST 6 1 200 6X1G304PCRST 6 1 ¹⁄₄ 200 6X1.14G304PCRST 6 1 ¹⁄₂ 200 6X1.12G304PCRST 6 1 ³⁄₄ 200 6X1.34G304PCRST 6 2 200 6X2G304PCRST 8 ¹⁄₄ 200 8X14G304PCRST 8 ³⁄₈ 200 8X38G304PCRST 8 ¹⁄₂ 200 8X12G304PCRST 8 ⁵⁄₈ 200 8X58G304PCRST 8 ³⁄₄ 200 8X34G304PCRST 8 1 200 8X1G304PCRST 8 1 ¹⁄₄ 200 8X1.14G304PCRST 8 1 ¹⁄₂ 200 8X1.12G304PCRST 8 1 ³⁄₄ 200 8X1.34G304PCRST 8 2 200 8X2G304PCRST 8 2 ¹⁄₂ 100 8X2.12G304PCRST 8 3 100 8X3G304PCRST 10 ³⁄₈ 100 10X38G304PCRST 10 ¹⁄₂ 100 10X12G304PCRST 10 ⁵⁄₈ 100 10X58G304PCRST 10 ³⁄₄ 100 10X34G304PCRST 10 1 100 10X1G304PCRST 10 1 ¹⁄₄ 100 10X1.14G304PCRST 10 1 ¹⁄₂ 100 10X1.12G304PCRST 10 1 ³⁄₄ 100 10X1.34G304PCRST 10 2 100 10X2G304PCRST 10 2 ¹⁄₂ 100 10X2.12G304PCRST 10 3 100 10X3G304PCRST 12 ¹⁄₂ 100 12X12G304PCRST
continued…
GRADE 304 PAN PHILLIPS SELF TAPPING SCREWS – TYPE AB continued…
Dia. Length Pack Part No. gauge inch qty
12 ⁵⁄₈ 100 12X58G304PCRST 12 ³⁄₄ 100 12X34G304PCRST 12 1 100 12X1G304PCRST 12 1 ¹⁄₄ 100 12X1.14G304PCRST 12 1 ¹⁄₂ 100 12X1.12G304PCRST 12 1 ³⁄₄ 100 12X1.34G304PCRST 12 2 100 12X2G304PCRST 12 2 ¹⁄₂ 100 12X2.12G304PCRST 12 3 100 12X3G304PCRST 14 ¹⁄₂ 100 14X12G304PCRST 14 ⁵⁄₈ 100 14X58G304PCRST 14 ³⁄₄ 100 14X34G304PCRST 14 1 100 14X1G304PCRST 14 1 ¹⁄₄ 100 14X1.14G304PCRST 14 1 ¹⁄₂ 100 14X1.12G304PCRST 14 1 ³⁄₄ 100 14X1.34G304PCRST 14 2 100 14X2G304PCRST 14 2 ¹⁄₂ 100 14X2.12G304PCRST 14 3 100 14X3G304PCRST
GRADE 316 PAN PHILLIPS SELF TAPPING SCREWS – TYPE AB
Dia. Length Pack Part No. gauge inch qty
4 ¹⁄₄ 100 4X14G316PCRST 4 ³⁄₈ 100 4X38G316PCRST 4 ¹⁄₂ 100 4X12G316PCRST 4 ⁵⁄₈ 100 4X58G316PCRST 4 ³⁄₄ 100 4X34G316PCRST 4 1 100 4X1G316PCRST 6 ³⁄₈ 100 6X38G316PCRST 6 ¹⁄₂ 100 6X12G316PCRST 6 ⁵⁄₈ 100 6X58G316PCRST 6 ³⁄₄ 100 6X34G316PCRST 6 1 100 6X1G316PCRST 6 1 ¹⁄₄ 100 6X1.14G316PCRST 6 1 ¹⁄₂ 100 6X1.12G316PCRST 8 ¹⁄₄ 100 8X14G316PCRST 8 ³⁄₈ 100 8X38G316PCRST 8 ¹⁄₂ 100 8X12G316PCRST 8 ⁵⁄₈ 100 8X58G316PCRST 8 ³⁄₄ 100 8X34G316PCRST 8 1 100 8X1G316PCRST 8 1 ¹⁄₄ 100 8X1.14G316PCRST 8 1 ¹⁄₂ 100 8X1.12G316PCRST 8 2 100 8X2G316PCRST
continued…
DOES IT FIT?Choosing the correct fastener for the job is essential. If you’re not sure of the grade, protective coating, head type or thread for the job ask us. Specialist advice is another way we’re making your job easier. Turn to back cover for your nearest branch.
Catering for all major industries across Australia, we have a huge range of fastener products available. No matter what type of fastener you need, Coventry Fasteners will have it, source it or get it manufactured to meet your specifications.
visit us at www.coventryfasteners.com.au
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCH TURN TO BACK COVER FOR YOUR NEAREST BRANCH
Every fastener you can think of
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SELF TAPPIN
G A
ND
WO
OD
SCREWS
77AUSTRALIA’S FASTENER SPECIALISTS
BRANCHES AUSTRALIA WIDEGRADE 316 PAN PHILLIPS SELF TAPPING SCREWS – TYPE AB continued…
Dia. Length Pack Part No. gauge inch qty
10 ¹⁄₂ 100 10X12G316PCRST 10 ⁵⁄₈ 100 10X58G316PCRST 10 ³⁄₄ 100 10X34G316PCRST 10 1 100 10X1G316PCRST 10 1 ¹⁄₄ 100 10X1.14G316PCRST 10 1 ¹⁄₂ 100 10X1.12G316PCRST 10 2 100 10X2G316PCRST 12 ³⁄₄ 100 12X34G316PCRST 12 1 100 12X1G316PCRST 12 1 ¹⁄₄ 100 12X1.14G316PCRST 12 1 ¹⁄₂ 100 12X1.12G316PCRST 12 2 100 12X2G316PCRST 12 2 ¹⁄₂ 100 12X2.12G316PCRST 14 ³⁄₄ 100 14X34G316PCRST 14 1 100 14X1G316PCRST 14 1 ¹⁄₂ 100 14X1.12G316PCRST 14 2 100 14X2G316PCRST
GRADE 304 CSK PHILLIPS SELF TAPPING SCREWS – TYPE AB
Dia. Length Pack Part No. gauge inch qty
4 ¹⁄₄ 200 4X14G304CCRST 4 ³⁄₈ 200 4X38G304CCRST 4 ¹⁄₂ 200 4X12G304CCRST 4 ⁵⁄₈ 200 4X58G304CCRST 4 ³⁄₄ 200 4X34G304CCRST 4 1 200 4X1G304CCRST 6 ³⁄₈ 200 6X38G304CCRST 6 ¹⁄₂ 200 6X12G304CCRST 6 ⁵⁄₈ 200 6X58G304CCRST 6 ³⁄₄ 200 6X34G304CCRST 6 1 200 6X1G304CCRST 6 1 ¹⁄₄ 200 6X1.14G304CCRST 6 1 ¹⁄₂ 200 6X1.12G304CCRST 6 1 ³⁄₄ 200 6X1.34G304CCRST 6 2 200 6X2G304CCRST 8 ³⁄₈ 200 8X38G304CCRST 8 ¹⁄₂ 200 8X12G304CCRST 8 ⁵⁄₈ 200 8X58G304CCRST 8 ³⁄₄ 200 8X34G304CCRST 8 1 200 8X1G304CCRST 8 1 ¹⁄₄ 200 8X1.14G304CCRST 8 1 ¹⁄₂ 200 8X1.12G304CCRST 8 1 ³⁄₄ 200 8X1.34G304CCRST 8 2 200 8X2G304CCRST 8 2 ¹⁄₂ 100 8X2.12G304CCRST 8 3 100 8X3G304CCRST 10 ³⁄₈ 100 10X38G304CCRST 10 ¹⁄₂ 100 10X12G304CCRST 10 ⁵⁄₈ 100 10X58G304CCRST 10 ³⁄₄ 100 10X34G304CCRST 10 1 100 10X1G304CCRST 10 1 ¹⁄₄ 100 10X1.14G304CCRST 10 1 ¹⁄₂ 100 10X1.12G304CCRST
continued…
GRADE 304 CSK PHILLIPS SELF TAPPING SCREWS – TYPE AB continued…
Dia. Length Pack Part No. gauge inch qty
10 1 ³⁄₄ 100 10X1.34G304CCRST 10 2 100 10X2G304CCRST 10 2 ¹⁄₂ 100 10X2.12G304CCRST 10 3 100 10X3G304CCRST 12 ¹⁄₂ 100 12X12G304CCRST 12 ⁵⁄₈ 100 12X58G304CCRST 12 ³⁄₄ 100 12X34G304CCRST 12 1 100 12X1G304CCRST 12 1 ¹⁄₄ 100 12X1.14G304CCRST 12 1 ¹⁄₂ 100 12X1.12G304CCRST 12 1 ³⁄₄ 100 12X1.34G304CCRST 12 2 100 12X2G304CCRST 12 2 ¹⁄₂ 100 12X2.12G304CCRST 12 3 100 12X3G304CCRST 14 ³⁄₄ 100 14X34G304CCRST 14 1 100 14X1G304CCRST 14 1 ¹⁄₄ 100 14X1.14G304CCRST 14 1 ¹⁄₂ 100 14X1.12G304CCRST 14 1 ³⁄₄ 100 14X1.34G304CCRST 14 2 100 14X2G304CCRST 14 2 ¹⁄₂ 100 14X2.12G304CCRST 14 3 100 14X3G304CCRST
GRADE 316 CSK PHILLIPS SELF TAPPING SCREWS – TYPE AB
Dia. Length Pack Part No. gauge inch qty
4 ³⁄₈ 100 4X38G316CCRST 4 ¹⁄₂ 100 4X12G316CCRST 4 ⁵⁄₈ 100 4X58G316CCRST 4 ³⁄₄ 100 4X34G316CCRST 4 1 100 4X1G316CCRST 6 ¹⁄₂ 100 6X12G316CCRST 6 ⁵⁄₈ 100 6X58G316CCRST 6 ³⁄₄ 100 6X34G316CCRST 6 1 100 6X1G316CCRST 6 1 ¹⁄₄ 100 6X1.14G316CCRST 6 1 ¹⁄₂ 100 6X1.12G316CCRST 8 ³⁄₈ 100 8X38G316CCRST 8 ¹⁄₂ 100 8X12G316CCRST 8 ⁵⁄₈ 100 8X58G316CCRST 8 ³⁄₄ 100 8X34G316CCRST 8 1 100 8X1G316CCRST 8 1 ¹⁄₄ 100 8X1.14G316CCRST 8 1 ¹⁄₂ 100 8X1.12G316CCRST 8 1 ³⁄₄ 100 8X1.34G316CCRST 8 2 100 8X2G316CCRST
continued…
ONLINE CATALOGUEVisit www.coventryfasteners.com.au to view current list prices for all products in our Stainless Steel, Industrial and Construction Fasteners catalogues. Current list prices at the click of a button – it’s just another way we’re making your job easier.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SELF
TA
PPIN
G A
ND
WO
OD
SCRE
WS
78 AUSTRALIA’S FASTENER SPECIALISTS
SPECIALIST ADVICEGRADE 316 CSK PHILLIPS SELF TAPPING SCREWS – TYPE AB continued…
Dia. Length Pack Part No. gauge inch qty
10 ¹⁄₂ 100 10X12G316CCRST 10 ⁵⁄₈ 100 10X58G316CCRST 10 ³⁄₄ 100 10X34G316CCRST 10 1 100 10X1G316CCRST 10 1 ¹⁄₄ 100 10X1.14G316CCRST 10 1 ¹⁄₂ 100 10X1.12G316CCRST 10 2 100 10X2G316CCRST 10 2 ¹⁄₂ 100 10X2.12G316CCRST 12 ³⁄₄ 100 12X34G316CCRST 12 1 100 12X1G316CCRST 12 1 ¹⁄₄ 100 12X1.14G316CCRST 12 1 ¹⁄₂ 100 12X1.12G316CCRST 12 2 100 12X2G316CCRST 12 2 ¹⁄₂ 100 12X2.12G316CCRST 14 1 100 14X1G316CCRST 14 1 ¹⁄₂ 100 14X1.12G316CCRST 14 2 100 14X2G316CCRST
Woodscrews
GRADE 304 CSK PHILLIPS WOODSCREWS
Dia. Length Pack Part No. gauge inch qty
4 ¹⁄₂ 200 4X12G304CCRWS 4 ⁵⁄₈ 200 4X58G304CCRWS 6 ⁵⁄₈ 200 6X58G304CCRWS 6 ³⁄₄ 200 6X34G304CCRWS 6 1 200 6X1G304CCRWS 8 ³⁄₄ 100 8X34G304CCRWS 8 1 200 8X1G304CCRWS 8 1 ¹⁄₄ 200 8X1.14G304CCRWS 8 1 ¹⁄₂ 200 8X1.12G304CCRWS 10 1 100 10X1G304CCRWS 10 1 ¹⁄₄ 100 10X1.14G304CCRWS 10 1 ¹⁄₂ 100 10X1.12G304CCRWS 10 1 ³⁄₄ 100 10X1.34G304CCRWS 10 2 100 10X2G304CCRWS 12 1 ¹⁄₄ 100 12X1.14G304CCRWS 12 1 ¹⁄₂ 100 12X1.12G304CCRWS 12 2 100 12X2G304CCRWS 12 2 ¹⁄₂ 100 12X2.12G304CCRWS 14 2 100 14X2G304CCRWS 14 2 ¹⁄₂ 100 14X2.12G304CCRWS 14 3 100 14X3G304CCRWS 16 4 50 16X4G304CCRWS
GRADE 316 CSK SLOTTED WOODSCREWS
Dia. Length Pack Part No. gauge inch qty
8 ³⁄₄ 100 8X34G316CWS 8 1 ¹⁄₄ 100 8X1.14G316CWS 10 1 100 10X1G316CWS 10 1 ¹⁄₂ 100 10X1.12G316CWS 10 2 100 10X2G316CWS 10 2 ¹⁄₂ 100 10X2.12G316CWS 12 2 100 12X2G316CWS 12 3 100 12X3G316CWS 14 4 100 14X4G316CWS
STAY INFORMED WITH FASTENER TORQUE.
For the latest products and special offers pick up a free copy of Fastener Torque from
your nearest branch.
79
THREADED ROD/U DRIVE SCREWS/WING SCREWS/THUMB SCREWS/COTTEPINS/SPRING PINS/GLENLOCH PINS/ENGINEERS STUDS/FLAT HEAD NAILSTHREADED ROD/U DRIVE SCREWS/WING SCREWS/THUMB SCREWS/COTTEPINS/SPRING PINS/GLENLOCH PINS/ENGINEERS STUDS/FLAT HEAD NAILSTHREADED ROD/U DRIVE SCREWS/WING SCREWS/THUMB SCREWS/COTTEPINS/SPRING PINS/GLENLOCH PINS/ENGINEERS STUDS/FLAT HEAD NAILSTHREADED ROD/U DRIVE SCREWS/WING SCREWS/THUMB SCREWS/COTTEPINS/SPRING PINS/GLENLOCH PINS/ENGINEERS STUDS/FLAT HEAD NAILSTHREADED ROD/U DRIVE SCREWS/WING SCREWS/THUMB SCREWS/COTTEMISCELLANEOUS
MIS
CELL
AN
EOU
S
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
80 AUSTRALIA’S FASTENER SPECIALISTS
FAST DELIVERYWHY WE STOCK IT
Contact your local Coventry Fasteners branch for more information on this product (see back of catalogue for your nearest branch).
NORD-LOCK’s unique bolt securing system consists of a pair of washers with a wedge-locking action that uses tension to make the bolt self-locking. Used together with a standard nut, NORD-LOCK achieves a locking that is superior to other locking hardware, especially under vibration or dynamic loads. In heavy industrial applications we recommend NORD-LOCK as a reliable and effective solution. NORD-LOCK washers are available through our national network of stores. Innovative products – just another way we’re making your job easier.
NORD-LOCK washers secure nuts and bolts better than any other self-locking system.
WANT TO KNOW MORE?
1. NORD-LOCK can be used with bolts in tapped holes.
2. NORD-LOCK can also be used in counter-bored holes.
3. Through holes require two pairs of NORD-LOCK washers. Keep the bolt secured when tightening the nut.
4. For slotted holes or on soft material, use a flanged nut/bolt together with NORD-LOCK “sp” (washers with enlarged outer diameter).
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
MISCELLA
NEO
US
81AUSTRALIA’S FASTENER SPECIALISTS
FAST DELIVERYThreaded Rod
GRADE 304 METRIC THREADED ROD
Dia. Length Pack Part No. mm m qty
3 1 1 3X1MG304TR 4 1 1 4X1MG304TR 5 1 1 5X1MG304TR 6 1 1 6X1MG304TR 8 1 1 8X1MG304TR 10 1 1 10X1MG304TR 12 1 1 12X1MG304TR 16 1 1 16X1MG304TR 20 1 1 20X1MG304TR 24 1 1 24X1MG304TR
GRADE 316 METRIC THREADED ROD
Dia. Length Pack Part No. mm m qty
3 1 1 3X1MG316TR 4 1 1 4X1MG316TR 5 1 1 5X1MG316TR 6 1 1 6X1MG316TR 8 1 1 8X1MG316TR 10 1 1 10X1MG316TR 12 1 1 12X1MG316TR 14 1 1 14X1MG316TR 16 1 1 16X1MG316TR 18 1 1 18X1MG316TR 20 1 1 20X1MG316TR 22 1 1 22X1MG316TR 24 1 1 24X1MG316TR 27 1 1 27X1MG316TR 30 1 1 30X1MG316TR 36 1 1 36X1MG316TR
GRADE 304 BSW THREADED ROD
Dia. Length Pack Part No. inch inch qty
¹⁄₂ 36 1 12X36BWG304TR
GRADE 316 BSW THREADED ROD
Dia. Length Pack Part No. inch inch qty
¹⁄₂ 36 1 12X36BWG316TR
GRADE 304 UNC THREADED ROD
Dia. Length Pack Part No. inch inch qty
10-24 36 1 10-24X36NCG304TR ¹⁄₄ 36 1 14X36NCG304TR ⁵⁄₁₆ 36 1 516X36NCG304TR ³⁄₈ 36 1 38X36NCG304TR ¹⁄₂ 36 1 12X36NCG304TR ³⁄₄ 36 1 34X36NCG304TR ⁵⁄₈ 36 1 58X36NCG304TR ⁷⁄₈ 36 1 78X36NCG304TR 1 36 1 1X36NCG304TR
GRADE 316 UNC THREADED ROD
Dia. Length Pack Part No. inch inch qty
10-24 36 1 10-24X36NCG316TR ¹⁄₄ 36 1 14X36NCG316TR ⁵⁄₁₆ 36 1 516X36NCG316TR ³⁄₈ 36 1 38X36NCG316TR ⁷⁄₁₆ 36 1 716X36NCG316TR ¹⁄₂ 36 1 12X36NCG316TR ⁵⁄₈ 36 1 58X36NCG316TR ³⁄₄ 36 1 34X36NCG316TR ⁷⁄₈ 36 1 78X36NCG316TR 1 36 1 1X36NCG316TR 1 ¹⁄₈ 36 1 1.18X36NCG316TR 1 ¹⁄₄ 36 1 1.14X36NCG316TR 1 ¹⁄₂ 36 1 1.12X36NCG316TR
U Drive Screws
GRADE 304 U DRIVE SCREWS
Dia. Length Pack Part No. gauge inch qty
00 ¹⁄₈ 200 00X18G304UDS 00 ³⁄₁₆ 200 00X316G304UDS 00 ¹⁄₄ 200 00X14G304UDS 0 ¹⁄₈ 200 0X18G304UDS 0 ³⁄₁₆ 200 0X316G304UDS 0 ¹⁄₄ 200 0X14G304UDS 0 ³⁄₈ 200 0X38G304UDS 2 ¹⁄₈ 200 2X18G304UDS 2 ³⁄₁₆ 200 2X316G304UDS 2 ¹⁄₄ 200 2X14G304UDS 2 ⁵⁄₁₆ 200 2X516G304UDS
continued…
As a fastener specialist, Coventry Fasteners' extensive industry experience enables our staff to provide comprehensive technical support for all types of fasteners. Our access to information and ability to source many different materials and coatings, means you can feel comfortable that you are getting the type of support that only comes from experience and a strong network of manufacturing partners.
visit us at www.coventryfasteners.com.au
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCH TURN TO BACK COVER FOR YOUR NEAREST BRANCH
Specialist advice when you need it
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
MISCELLA
NEO
US
83AUSTRALIA’S FASTENER SPECIALISTS
FRIENDLY SERVICEGRADE 304 U DRIVE SCREWS continued…
Dia. Length Pack Part No. gauge inch qty
4 ³⁄₁₆ 200 4X316G304UDS 4 ¹⁄₄ 200 4X14G304UDS 4 ⁵⁄₁₆ 200 4X516G304UDS 4 ³⁄₈ 200 4X38G304UDS 6 ¹⁄₄ 200 6X14G304UDS 6 ⁵⁄₁₆ 200 6X516G304UDS 6 ³⁄₈ 200 6X38G304UDS 6 ¹⁄₂ 200 6X12G304UDS 8 ¹⁄₂ 200 8X12G304UDS 10 ³⁄₈ 200 10X38G304UDS 10 ¹⁄₂ 200 10X12G304UDS
Wing Screws
GRADE 304 METRIC WING SCREWS
Dia. Length Pack Part No. mm mm qty
5 16 100 5X16MG304WS 5 20 100 5X20MG304WS 5 25 100 5X25MG304WS 6 12 100 6X12MG304WS 6 16 100 6X16MG304WS 6 20 100 6X20MG304WS 6 25 100 6X25MG304WS 6 30 100 6X30MG304WS 8 20 50 8X20MG304WS 8 25 50 8X25MG304WS 8 30 50 8X30MG304WS
Thumb Screws
GRADE 304 UNC THUMB SCREWS
Dia. Length Pack Part No. inch inch qty
¹⁄₄ ¹⁄₂ 100 14X12NCG304THS ¹⁄₄ ³⁄₄ 100 14X34NCG304THS
Cotter Pins
GRADE 304 METRIC COTTER PINS (SPLIT PINS)
Dia. Length Pack Part No. mm mm qty
0.8 10 200 0.8X10MG304CP 0.8 12 200 0.8X12MG304CP 0.8 16 200 0.8X16MG304CP 0.8 20 200 0.8X20MG304CP 0.8 32 200 0.8X32MG304CP 1 10 200 1X10MG304CP 1 12 200 1X12MG304CP 1 16 200 1X16MG304CP 1 20 200 1X20MG304CP 1 32 200 1X32MG304CP 1.2 16 200 1.2X16MG304CP 1.2 25 200 1.2X25MG304CP 1.6 10 200 1.6X10MG304CP 1.6 12 200 1.6X12MG304CP 1.6 14 200 1.6X14MG304CP 1.6 16 200 1.6X16MG304CP 1.6 20 200 1.6X20MG304CP 1.6 25 200 1.6X25MG304CP 1.6 32 200 1.6X32MG304CP 1.6 40 200 1.6X40MG304CP 2 10 200 2X10MG304CP 2 12 200 2X12MG304CP 2 16 200 2X16MG304CP 2 20 200 2X20MG304CP 2 25 200 2X25MG304CP 2 32 200 2X32MG304CP 2 40 200 2X40MG304CP 2.5 12 200 2.5X12MG304CP 2.5 16 200 2.5X16MG304CP 2.5 20 200 2.5X20MG304CP 2.5 25 200 2.5X25MG304CP 2.5 32 200 2.5X32MG304CP 2.5 36 200 2.5X36MG304CP 2.5 40 200 2.5X40MG304CP 2.5 50 200 2.5X50MG304CP 3.2 10 200 3.2X10MG304CP 3.2 12 200 3.2X12MG304CP 3.2 16 200 3.2X16MG304CP 3.2 20 200 3.2X20MG304CP 3.2 25 200 3.2X25MG304CP 3.2 32 200 3.2X32MG304CP 3.2 36 200 3.2X36MG304CP 3.2 40 200 3.2X40MG304CP 3.2 45 200 3.2X45MG304CP
continued…
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
MIS
CELL
AN
EOU
S84 AUSTRALIA’S FASTENER SPECIALISTS
HUGE RANGEGRADE 304 METRIC COTTER PINS (SPLIT PINS) continued…
Dia. Length Pack Part No. mm mm qty
3.2 50 200 3.2X50MG304CP 3.2 63 200 3.2X63MG304CP 3.2 80 200 3.2X80MG304CP 4 20 100 4X20MG304CP 4 25 100 4X25MG304CP 4 32 100 4X32MG304CP 4 36 100 4X36MG304CP 4 40 100 4X40MG304CP 4 45 100 4X45MG304CP 4 50 100 4X50MG304CP 4 63 100 4X63MG304CP 4 80 100 4X80MG304CP 5 20 100 5X20MG304CP 5 25 100 5X25MG304CP 5 32 100 5X32MG304CP 5 36 100 5X36MG304CP 5 40 100 5X40MG304CP 5 45 100 5X45MG304CP 5 50 100 5X50MG304CP 5 63 100 5X63MG304CP 5 71 100 5X71MG304CP 5 80 100 5X80MG304CP 5 90 100 5X90MG304CP 5 100 100 5X100MG304CP 6.3 25 100 6.3X25MG304CP 6.3 32 100 6.3X32MG304CP 6.3 40 100 6.3X40MG304CP 6.3 45 100 6.3X45MG304CP 6.3 50 100 6.3X50MG304CP 6.3 63 100 6.3X63MG304CP 6.3 80 100 6.3X80MG304CP 6.3 100 100 6.3X100MG304CP 8 50 50 8X50MG304CP 8 63 50 8X63MG304CP 8 80 50 8X80MG304CP 8 90 50 8X90MG304CP 8 100 50 8X100MG304CP 10 50 50 10X50MG304CP 10 63 50 10X63MG304CP 10 80 50 10X80MG304CP 10 90 50 10X90MG304CP 10 100 50 10X100MG304CP
GRADE 316 METRIC COTTER PINS (SPLIT PINS)
Dia. Length Pack Part No. mm mm qty
1.6 12 200 1.6X12MG316CP 1.6 20 200 1.6X20MG316CP 2.5 12 200 2.5X12MG316CP 2.5 20 200 2.5X20MG316CP 2.5 25 200 2.5X25MG316CP 2.5 40 200 2.5X40MG316CP 3.2 20 200 3.2X20MG316CP 3.2 25 200 3.2X25MG316CP 3.2 32 200 3.2X32MG316CP 3.2 40 200 3.2X40MG316CP 3.2 50 200 3.2X50MG316CP 4 25 100 4X25MG316CP 4 32 100 4X32MG316CP 4 40 100 4X40MG316CP 4 50 100 4X50MG316CP 5 25 100 5X25MG316CP 5 32 100 5X32MG316CP 5 40 100 5X40MG316CP 5 50 100 5X50MG316CP 5 63 100 5X63MG316CP 6.3 32 100 6.3X32MG316CP 6.3 40 100 6.3X40MG316CP 6.3 50 100 6.3X50MG316CP 6.3 63 100 6.3X63MG316CP 6.3 80 100 6.3X80MG316CP
Spring Pins
GRADE 420 ROLLED SPRING PINS
Dia. Length Pack Part No. inch inch qty
¹⁄₁₆ ³⁄₁₆ 200 116X316SSSP ¹⁄₁₆ ¹⁄₄ 200 116X14SSSP ¹⁄₁₆ ⁵⁄₁₆ 200 116X516SSSP ¹⁄₁₆ ³⁄₈ 200 116X38SSSP ¹⁄₁₆ ¹⁄₂ 200 116X12SSSP ¹⁄₁₆ ⁵⁄₈ 200 116X58SSSP ¹⁄₁₆ ³⁄₄ 200 116X34SSSP ¹⁄₁₆ 1 200 116X1SSSP ³⁄₃₂ ¹⁄₄ 200 332X14SSSP ³⁄₃₂ ⁵⁄₁₆ 200 332X516SSSP ³⁄₃₂ ³⁄₈ 200 332X38SSSP
continued…
FASTER ORDERINGDon’t forget to quote the part number when ordering. Quick and efficient ordering is another way we’re making your job easier.Turn to back cover for your nearest branch.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
MISCELLA
NEO
US
85AUSTRALIA’S FASTENER SPECIALISTS
HUGE RANGEGRADE 420 ROLLED SPRING PINS continued…
Dia. Length Pack Part No. inch inch qty
³⁄₃₂ ¹⁄₂ 200 332X12SSSP ³⁄₃₂ ⁵⁄₈ 200 332X58SSSP ³⁄₃₂ ³⁄₄ 200 332X34SSSP ³⁄₃₂ ⁷⁄₈ 200 332X78SSSP ³⁄₃₂ 1 200 332X1SSSP ¹⁄₈ ¹⁄₄ 200 18X14SSSP ¹⁄₈ ³⁄₈ 200 18X38SSSP ¹⁄₈ ¹⁄₂ 200 18X12SSSP ¹⁄₈ ⁵⁄₈ 200 18X58SSSP ¹⁄₈ ³⁄₄ 200 18X34SSSP ¹⁄₈ ⁷⁄₈ 200 18X78SSSP ¹⁄₈ 1 200 18X1SSSP ¹⁄₈ 1 ¹⁄₂ 200 18X1.12SSSP ¹⁄₈ 2 200 18X2SSSP ⁵⁄₃₂ ³⁄₈ 100 532X38SSSP ⁵⁄₃₂ ⁷⁄₁₆ 100 532X716SSSP ⁵⁄₃₂ ⁵⁄₈ 100 532X58SSSP ⁵⁄₃₂ ³⁄₄ 100 532X34SSSP ⁵⁄₃₂ ⁷⁄₈ 100 532X78SSSP ⁵⁄₃₂ 1 100 532X1SSSP ⁵⁄₃₂ 1 ¹⁄₄ 100 532X1.14SSSP ⁵⁄₃₂ 1 ¹⁄₂ 100 532X1.12SSSP ³⁄₁₆ ¹⁄₂ 100 316X12SSSP ³⁄₁₆ ⁵⁄₈ 100 316X58SSSP ³⁄₁₆ ³⁄₄ 100 316X34SSSP ³⁄₁₆ 1 100 316X1SSSP ³⁄₁₆ 1 ¹⁄₄ 100 316X1.14SSSP ³⁄₁₆ 1 ¹⁄₂ 100 316X1.12SSSP ³⁄₁₆ 2 100 316X2SSSP ³⁄₁₆ 2 ¹⁄₂ 100 316X2.12SSSP ¹⁄₄ ⁵⁄₈ 100 14X58SSSP ¹⁄₄ ³⁄₄ 100 14X34SSSP ¹⁄₄ 1 100 14X1SSSP ¹⁄₄ 1 ¹⁄₄ 100 14X1.14SSSP ¹⁄₄ 1 ¹⁄₂ 100 14X1.12SSSP ¹⁄₄ 1 ³⁄₄ 100 14X1.34SSSP ¹⁄₄ 2 100 14X2SSSP ¹⁄₄ 2 ¹⁄₂ 100 14X2.12SSSP ⁵⁄₁₆ ³⁄₄ 50 516X34SSSP ⁵⁄₁₆ 1 50 516X1SSSP ⁵⁄₁₆ 1 ¹⁄₄ 50 516X1.14SSSP ⁵⁄₁₆ 1 ¹⁄₂ 50 516X1.12SSSP ⁵⁄₁₆ 2 50 516X2SSSP ⁵⁄₁₆ 3 50 516X3SSSP ³⁄₈ 1 ¹⁄₂ 50 38X1.12SSSP ³⁄₈ 1 ³⁄₄ 50 38X1.34SSSP ³⁄₈ 3 50 38X3SSSP ¹⁄₂ 2 ¹⁄₄ 25 12X2.14SSSP ¹⁄₂ 2 ¹⁄₂ 25 12X2.12SSSP ¹⁄₂ 3 ¹⁄₂ 25 12X3.12SSSP
Glenloch Pins
GRADE 420 METRIC GLENLOCH SKEWPROOF ROLLED WAVE SPRING PINS
Dia. Length Pack Part No. mm mm qty
1.5 6 200 1.5X6MGLSP 1.5 10 200 1.5X10MGLSP 1.5 12 200 1.5X12MGLSP 1.5 16 200 1.5X16MGLSP 2 6 200 2X6MGLSP 2 8 200 2X8MGLSP 2 10 200 2X10MGLSP 2 12 200 2X12MGLSP 2 16 200 2X16MGLSP 2 20 200 2X20MGLSP 2.5 10 200 2.5X10MGLSP 2.5 12 200 2.5X12MGLSP 2.5 16 200 2.5X16MGLSP 2.5 20 200 2.5X20MGLSP 2.5 22 200 2.5X22MGLSP 2.5 25 200 2.5X25MGLSP 3 10 200 3X10MGLSP 3 12 200 3X12MGLSP 3 16 200 3X16MGLSP 3 20 200 3X20MGLSP 3 22 200 3X22MGLSP 3 25 200 3X25MGLSP 3.5 10 200 3.5X10MGLSP 3.5 12 200 3.5X12MGLSP 3.5 16 200 3.5X16MGLSP 3.5 20 200 3.5X20MGLSP 3.5 22 200 3.5X22MGLSP 3.5 25 200 3.5X25MGLSP 4 16 100 4X16MGLSP 4 20 100 4X20MGLSP 4 25 100 4X25MGLSP 4 30 100 4X30MGLSP 5 16 100 5X16MGLSP 5 20 100 5X20MGLSP 5 25 100 5X25MGLSP 5 30 100 5X30MGLSP 5 40 100 5X40MGLSP 5 50 100 5X50MGLSP 6 12 100 6X12MGLSP 6 16 100 6X16MGLSP 6 20 100 6X20MGLSP 6 25 100 6X25MGLSP 6 30 100 6X30MGLSP
continued…
LOCAL BRANCHESWith Australia’s largest network of local specialised fastener branches there’s a Coventry Fasteners branch near you. Local branches is another way we’re making your job easier.Turn to back cover for your nearest branch.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
MIS
CELL
AN
EOU
S86 AUSTRALIA’S FASTENER SPECIALISTS
BEST VALUEGRADE 420 METRIC GLENLOCH SKEWPROOF ROLLED WAVE SPRING PINS continued…
Dia. Length Pack Part No. mm mm qty
6 40 100 6X40MGLSP 6 50 100 6X50MGLSP 8 20 50 8X20MGLSP 8 25 50 8X25MGLSP 8 30 50 8X30MGLSP 8 40 50 8X40MGLSP 8 50 50 8X50MGLSP 8 60 50 8X60MGLSP 8 70 50 8X70MGLSP 10 40 50 10X40MGLSP
Engineers Studs
GRADE 316 ENGINEERS STUDS
Dia. Length Pack Part No. mm mm qty
8 30 50 8X30MG316ES 8 40 50 8X40MG316ES 8 45 50 8X45MG316ES 10 40 50 10X40MG316ES 10 50 50 10X50MG316ES 12 40 25 12X40MG316ES 12 45 25 12X45MG316ES 12 50 25 12X50MG316ES 12 55 25 12X55MG316ES 12 60 25 12X60MG316ES 16 50 25 16X50MG316ES 16 55 25 16X55MG316ES 16 60 25 16X60MG316ES 16 65 25 16X65MG316ES 16 80 25 16X80MG316ES
GRADE 316 BSW ENGINEERS STUDS
Dia. Length Pack Part No. inch inch qty
⁵⁄₁₆ 1 ¹⁄₂ 50 516X1.12BWG316ES ⁵⁄₁₆ 2 50 516X2BWG316ES ³⁄₈ 1 ¹⁄₂ 50 38X1.12BWG316ES ³⁄₈ 2 50 38X2BWG316ES ³⁄₈ 2 ¹⁄₂ 50 38X2.12BWG316ES ¹⁄₂ 1 ³⁄₄ 25 12X1.34BWG316ES ¹⁄₂ 2 25 12X2BWG316ES
continued…
GRADE 316 BSW ENGINEERS STUDS continued…
Dia. Length Pack Part No. inch inch qty
⁵⁄₈ 2 25 58X2BWG316ES ⁵⁄₈ 2 ¹⁄₂ 25 58X2.12BWG316ES ⁵⁄₈ 3 25 58X3BWG316ES
Flat Head Nails
GRADE 304 FLAT HEAD ANNULAR RING DIAMOND POINT NAILS
Dia. Length Approx Part No. mm mm No/Kg
2 25 1300 2X25MG304N1K 2.8 25 820 2.8X25MG304N1K 2.8 30 680 2.8X30MG304N1K 3.15 50 310 3.15X50MG304N1K 3.75 75 150 3.75X75MG304N1K
WE ALSOSUPPLY INDUSTRIAL,
CONSTRUCTION AND SPECIALISED
FASTENERS AS WELL AS ASSOCIATED TOOLS AND CONSUMABLES.
Call your nearest branch now for a catalogue.
87
EYE DRIVE SECURITY MACHINE SCREWS/EYE DRIVE SELF TAPPING SECURITSCREWS/POST HEXAGON SOCKET SECURITY MACHINE SCREWS/POSHEXAGON SOCKET SELF TAPPING SECURITY SCREWS/POST TORX® SOCKESECURITY MACHINE SCREWS/ONE WAY RAISED COUNTERSUNK HEAD SELTAPPING SCREWS/VANDAL PROOF BREAKAWAY NUTS/POST SOCKET KEAND BITS/POST TORX® SOCKET KEY AND BITS/EYE DRIVE BITS/ONE WAREMOVAL TOOL/EYE DRIVE SECURITY MACHINE SCREWS/EYE DRIVE SELTAPPING SECURITY SCREWS/POST HEXAGON SOCKET SECURITY MACHINSCREWS/POST HEXAGON SOCKET SELF TAPPING SECURITY SCREWS/POSSECURITY
SECU
RITY
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
88 AUSTRALIA’S FASTENER SPECIALISTS
BRANCHES AUSTRALIA WIDE
Security screws and other anti tamper fastenings provide a secure fixing that cannot easily be tampered with. They help to tackle opportunist theft and vandalism and have many useful preventative applications. Some tamper resistant fixings enable authorised access by using a special tool whilst others are intended as permanent fixings.
APPLICATIONS FOR SECURITY FASTENERS INCLUDE:Prisons, hospitals, schools, hotels, councils, windows, computers, security fencing, public transport, playground equipment, signage, burglar alarms, stadium seating, security gates, security lights, CCTV cameras and equipment, shutter doors, street furniture, control boxes and more.
Below are some examples of the most popular security fasteners. Each has a unique feature rendering the fastener tamper resistant - reducing the risk of vandals or intruders tampering or undoing the screws.
EYE DRIVE SCREWS:Eye Drive Security Machine Screws are also known as snake eye or pig nose and are designed for low to medium torque applications. They have two holes drilled into the head which need a unique 2-pin driver to install and remove. Eye Drive Screws however are not recommended if high torque is required. The bits are not designed for applications requiring a torque greater than 4.8 Nm. With an aesthetically pleasing head design they are often specified by designers and architects.
POST HEXAGON SOCKET SCREWS:Post Hexagon Security Screws are available in either self tapping or machine screw form. The Post Hex Security Screw has an internal pin within the hexagonal socket of the head, requiring a special insert bit or key wrench to insert and remove. Engineered for a high degree of tamper-resistance, these ‘2-way’ screws offer positive engaging, high torque transmission while resisting cam-out and tool wear.
POST TORX SOCKET SCREWS:Post Torx Socket Security Screws are available in self tapping or machine screw form and are ‘2-way’. The Post Torx Socket Security Screw has an internal pin within the 6 lobe socket (star drive) of the head, requiring a special insert bit or key wrench to insert and remove. Maximum torque transfer and positive tool engagement means easier drive installation with less pressure and slippage.
ONE WAY RAISED COUNTERSUNK HEAD SELF TAPPING SCREWS:One Way Raised Countersunk Screws are available in self tapping form. This popular design installs with a standard screwdriver. The reverse side of the nut is cammed out to prevent unauthorised removal. Half of each side of the slot has been smoothed down during manufacture. When you try to extract the screw, the slotted screwdriver tip rides out of the slot. Due to the design of the One Way Raised Countersunk Screws they are suitable for higher torque applications. While a removal tool is available, One Way screws are not recommended if later removal is anticipated.
VANDAL PROOF BREAKAWAY NUTS:Vandal Proof Breakaway Nuts have a conical shaped body with a hexagonal nut at the top - this means that it can be tightened using a standard spanner. When the nut approaches its maximum torque point the hexagonal part shears off leaving just the Breakaway Nut remaining.
A wide range of keys, bits and removal tools are also available.
James Glen has established itself as the market leader of stainless steel fasteners in Australia which is why we recommend their extensive range of security fasteners. Contact your local Coventry Fasteners branch for more information on this product (see back of catalogue for your nearest branch).
SECURE YOUR ASSETS WITH JAMES GLEN STAINLESS STEEL SECURITY FASTENERS
WHY WE STOCK IT
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SECURITY
89AUSTRALIA’S FASTENER SPECIALISTS
BRANCHES AUSTRALIA WIDEEye Drive Self Tapping Security Screws
GRADE 304 PAN HEAD EYE DRIVE SELF TAPPING SECURITY SCREWS
Dia. Length Pack Part No. gauge inch qty
(BIT NO.6) 6 ³⁄₈ 100 6X38G304EDPST 6 ¹⁄₂ 100 6X12G304EDPST 6 ⁵⁄₈ 100 6X58G304EDPST 6 ³⁄₄ 100 6X34G304EDPST 6 1 100 6X1G304EDPST 6 1 ¹⁄₂ 100 6X1.12G304EDPST (BIT NO.8) 8 ¹⁄₂ 100 8X12G304EDPST 8 ⁵⁄₈ 100 8X58G304EDPST 8 ³⁄₄ 100 8X34G304EDPST 8 1 100 8X1G304EDPST 8 1 ¹⁄₂ 100 8X1.12G304EDPST (BIT NO.10) 10 ¹⁄₂ 100 10X12G304EDPST 10 ⁵⁄₈ 100 10X58G304EDPST 10 ³⁄₄ 100 10X34G304EDPST 10 1 100 10X1G304EDPST 10 1 ¹⁄₂ 100 10X1.12G304EDPST 10 2 100 10X2G304EDPST (BIT NO.14) 14 ¹⁄₂ 100 14X12G304EDPST 14 ³⁄₄ 100 14X34G304EDPST 14 1 100 14X1G304EDPST 14 1 ¹⁄₂ 100 14X1.12G304EDPST
Eye Drive Security Machine Screws
GRADE 304 METRIC PAN HEAD EYE DRIVE SECURITY MACHINE SCREWS
Dia. Length Pack Part No. mm mm qty
(BIT NO.8) 4 10 100 4X10MG304EDPMT 4 12 100 4X12MG304EDPMT 4 16 100 4X16MG304EDPMT 4 20 100 4X20MG304EDPMT 4 25 100 4X25MG304EDPMT (BIT NO.10) 5 12 100 5X12MG304EDPMT 5 16 100 5X16MG304EDPMT 5 20 100 5X20MG304EDPMT 5 25 100 5X25MG304EDPMT 5 30 100 5X30MG304EDPMT (BIT NO.14) 6 12 100 6X12MG304EDPMT 6 16 100 6X16MG304EDPMT 6 20 100 6X20MG304EDPMT 6 25 100 6X25MG304EDPMT 6 30 100 6X30MG304EDPMT 6 40 100 6X40MG304EDPMT
GRADE 304 METRIC COUNTERSUNK HEAD EYE DRIVE SECURITY MACHINE SCREWS
Dia. Length Pack Part No. mm mm qty
(BIT NO.8) 4 10 100 4X10MG304EDCMT 4 12 100 4X12MG304EDCMT 4 16 100 4X16MG304EDCMT 4 20 100 4X20MG304EDCMT 4 25 100 4X25MG304EDCMT (BIT NO.10) 5 12 100 5X12MG304EDCMT 5 16 100 5X16MG304EDCMT 5 20 100 5X20MG304EDCMT 5 25 100 5X25MG304EDCMT 5 30 100 5X30MG304EDCMT (BIT NO.14) 6 12 100 6X12MG304EDCMT 6 20 100 6X20MG304EDCMT 6 25 100 6X25MG304EDCMT 6 30 100 6X30MG304EDCMT 6 40 100 6X40MG304EDCMT
GET TO KNOW USCoventry Fasteners is part of the publicly listed Australian company Coventry Group Ltd with a proud history of servicing mining, construction and manufacturing industries. Find out more at www.coventryfasteners.com.au
SECU
RITY
90 AUSTRALIA’S FASTENER SPECIALISTS
SPECIALIST ADVICE
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
GRADE 304 METRIC BUTTON HEAD POST HEXAGON SOCKET SECURITY MACHINE SCREWS continued…
Dia. Length Pack Part No. mm mm qty
5 16 100 5X16MG304PHBHSS 5 20 100 5X20MG304PHBHSS 5 25 100 5X25MG304PHBHSS 5 30 100 5X30MG304PHBHSS (RECESS A/F 4.0mm) 6 10 100 6X10MG304PHBHSS 6 12 100 6X12MG304PHBHSS 6 16 100 6X16MG304PHBHSS 6 20 100 6X20MG304PHBHSS 6 25 100 6X25MG304PHBHSS 6 30 100 6X30MG304PHBHSS 6 35 100 6X35MG304PHBHSS 6 40 100 6X40MG304PHBHSS 6 45 100 6X45MG304PHBHSS 6 50 100 6X50MG304PHBHSS (RECESS A/F 5.0mm) 8 10 100 8X10MG304PHBHSS 8 12 100 8X12MG304PHBHSS 8 16 100 8X16MG304PHBHSS 8 20 100 8X20MG304PHBHSS 8 25 100 8X25MG304PHBHSS 8 30 100 8X30MG304PHBHSS 8 35 100 8X35MG304PHBHSS 8 40 100 8X40MG304PHBHSS 8 50 100 8X50MG304PHBHSS 8 60 50 8X60MG304PHBHSS (RECESS A/F 6.0mm) 10 16 50 10X16MG304PHBHSS 10 20 50 10X20MG304PHBHSS 10 25 50 10X25MG304PHBHSS 10 30 50 10X30MG304PHBHSS 10 35 50 10X35MG304PHBHSS 10 40 50 10X40MG304PHBHSS
GRADE 304 UNC BUTTON HEAD POST HEXAGON SOCKET SECURITY MACHINE SCREWS
Dia. Length Pack Part No. inch inch qty
(RECESS A/F 1/8) 6-32 ¹⁄₂ 100 6-32X12NCG304PHBHSS 6-32 ³⁄₄ 100 6-32X34NCG304PHBHSS (RECESS A/F 5/32) 8-32 ³⁄₈ 100 8-32X38NCG304PHBHSS 8-32 ³⁄₄ 100 8-32X34NCG304PHBHSS 8-32 1 100 8-32X1NCG304PHBHSS 8-32 1 ¹⁄₂ 100 8-32X1.12NCG304PHBHSS (RECESS A/F 5/32) 10-24 ¹⁄₂ 100 10-24X12NCG304PHBHSS 10-24 ³⁄₄ 100 10-24X34NCG304PHBHSS 10-24 1 100 10-24X1NCG304PHBHSS 10-24 1 ¹⁄₂ 100 10-24X1.12NCG304PHBHSS
continued…
GRADE 304 COUNTERSUNK HEAD EYE DRIVE SELF TAPPING SECURITY SCREWS
Dia. Length Pack Part No. gauge inch qty
(BIT NO.6) 6 ¹⁄₂ 100 6X12G304EDCST 6 ⁵⁄₈ 100 6X58G304EDCST 6 ³⁄₄ 100 6X34G304EDCST 6 1 100 6X1G304EDCST 6 1 ¹⁄₂ 100 6X1.12G304EDCST (BIT NO.8) 8 ¹⁄₂ 100 8X12G304EDCST 8 ⁵⁄₈ 100 8X58G304EDCST 8 ³⁄₄ 100 8X34G304EDCST 8 1 100 8X1G304EDCST 8 1 ¹⁄₂ 100 8X1.12G304EDCST (BIT NO.10) 10 ¹⁄₂ 100 10X12G304EDCST 10 ⁵⁄₈ 100 10X58G304EDCST 10 ³⁄₄ 100 10X34G304EDCST 10 1 100 10X1G304EDCST 10 1 ¹⁄₂ 100 10X1.12G304EDCST (BIT NO.14) 14 ³⁄₄ 100 14X34G304EDCST 14 1 100 14X1G304EDCST 14 1 ¹⁄₂ 100 14X1.12G304EDCST
Post Hexagon Socket Security Machine Screws
GRADE 304 METRIC BUTTON HEAD POST HEXAGON SOCKET SECURITY MACHINE SCREWS
Dia. Length Pack Part No. mm mm qty
(RECESS A/F 2.5mm) 4 6 100 4X6MG304PHBHSS 4 8 100 4X8MG304PHBHSS 4 10 100 4X10MG304PHBHSS 4 12 100 4X12MG304PHBHSS 4 16 100 4X16MG304PHBHSS 4 20 100 4X20MG304PHBHSS 4 25 100 4X25MG304PHBHSS 4 30 100 4X30MG304PHBHSS (RECESS A/F 3.0mm) 5 10 100 5X10MG304PHBHSS 5 12 100 5X12MG304PHBHSS
continued…
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SECURITY
91AUSTRALIA’S FASTENER SPECIALISTS
SPECIALIST ADVICEGRADE 304 UNC COUNTERSUNK HEAD POST HEXAGON SOCKET SECURITY MACHINE SCREWS
Dia. Length Pack Part No. inch inch qty
(RECESS A/F 1/8) 6-32 ¹⁄₂ 100 6-32X12NCG304PHFHSS (RECESS A/F 5/32) 8-32 ¹⁄₂ 100 8-32X12NCG304PHFHSS 8-32 ³⁄₄ 100 8-32X34NCG304PHFHSS 8-32 1 100 8-32X1NCG304PHFHSS (RECESS A/F 5/32) 10-24 ¹⁄₂ 100 10-24X12NCG304PHFHSS 10-24 ³⁄₄ 100 10-24X34NCG304PHFHSS 10-24 1 100 10-24X1NCG304PHFHSS 10-24 1 ¹⁄₂ 100 10-24X1.12NCG304PHFHSS (RECESS A/F 5/32) ¹⁄₄ ¹⁄₂ 100 14X12NCG304PHFHSS ¹⁄₄ ³⁄₄ 100 14X34NCG304PHFHSS ¹⁄₄ 1 100 14X1NCG304PHFHSS ¹⁄₄ 1 ¹⁄₄ 100 14X1.14NCG304PHFHSS ¹⁄₄ 1 ¹⁄₂ 100 14X1.12NCG304PHFHSS ¹⁄₄ 2 100 14X2NCG304PHFHSS (RECESS A/F 3/16) ⁵⁄₁₆ ¹⁄₂ 100 516X12NCG304PHFHSS ⁵⁄₁₆ ³⁄₄ 100 516X34NCG304PHFHSS ⁵⁄₁₆ 1 100 516X1NCG304PHFHSS ⁵⁄₁₆ 1 ¹⁄₂ 100 516X1.12NCG304PHFHSS ⁵⁄₁₆ 2 100 516X2NCG304PHFHSS (RECESS A/F 7/32) ³⁄₈ ³⁄₄ 50 38X34NCG304PHFHSS ³⁄₈ 1 50 38X1NCG304PHFHSS ³⁄₈ 1 ¹⁄₄ 50 38X1.14NCG304PHFHSS ³⁄₈ 1 ¹⁄₂ 50 38X1.12NCG304PHFHSS ³⁄₈ 2 50 38X2NCG304PHFHSS
GRADE 304 UNC BUTTON HEAD POST HEXAGON SOCKET SECURITY MACHINE SCREWS continued…
Dia. Length Pack Part No. inch inch qty
(RECESS A/F 5/32) ¹⁄₄ ¹⁄₂ 100 14X12NCG304PHBHSS ¹⁄₄ ³⁄₄ 100 14X34NCG304PHBHSS ¹⁄₄ 1 100 14X1NCG304PHBHSS ¹⁄₄ 1 ¹⁄₄ 100 14X1.14NCG304PHBHSS ¹⁄₄ 1 ¹⁄₂ 100 14X1.12NCG304PHBHSS ¹⁄₄ 2 100 14X2NCG304PHBHSS (RECESS A/F 3/16) ⁵⁄₁₆ ¹⁄₂ 100 516X12NCG304PHBHSS ⁵⁄₁₆ ³⁄₄ 100 516X34NCG304PHBHSS ⁵⁄₁₆ 1 100 516X1NCG304PHBHSS ⁵⁄₁₆ 1 ¹⁄₂ 100 516X1.12NCG304PHBHSS ⁵⁄₁₆ 2 100 516X2NCG304PHBHSS (RECESS A/F 7/32) ³⁄₈ ¹⁄₂ 50 38X12NCG304PHBHSS ³⁄₈ ³⁄₄ 50 38X34NCG304PHBHSS ³⁄₈ 1 50 38X1NCG304PHBHSS ³⁄₈ 1 ¹⁄₄ 50 38X1.14NCG304PHBHSS ³⁄₈ 1 ¹⁄₂ 50 38X1.12NCG304PHBHSS ³⁄₈ 2 50 38X2NCG304PHBHSS
GRADE 304 METRIC COUNTERSUNK HEAD POST HEXAGON SOCKET SECURITY MACHINE SCREWS
Dia. Length Pack Part No. mm mm qty
(RECESS A/F 2.5mm) 4 8 100 4X8MG304PHFHSS 4 10 100 4X10MG304PHFHSS 4 12 100 4X12MG304PHFHSS 4 16 100 4X16MG304PHFHSS 4 20 100 4X20MG304PHFHSS 4 25 100 4X25MG304PHFHSS (RECESS A/F 3.0mm) 5 10 100 5X10MG304PHFHSS 5 12 100 5X12MG304PHFHSS 5 16 100 5X16MG304PHFHSS 5 20 100 5X20MG304PHFHSS 5 25 100 5X25MG304PHFHSS 5 30 100 5X30MG304PHFHSS (RECESS A/F 4.0mm) 6 10 100 6X10MG304PHFHSS 6 12 100 6X12MG304PHFHSS 6 16 100 6X16MG304PHFHSS 6 20 100 6X20MG304PHFHSS 6 25 100 6X25MG304PHFHSS 6 30 100 6X30MG304PHFHSS 6 40 100 6X40MG304PHFHSS 6 45 100 6X45MG304PHFHSS 6 50 100 6X50MG304PHFHSS (RECESS A/F 5.0mm) 8 12 100 8X12MG304PHFHSS 8 16 100 8X16MG304PHFHSS 8 20 100 8X20MG304PHFHSS 8 25 100 8X25MG304PHFHSS 8 30 100 8X30MG304PHFHSS 8 40 100 8X40MG304PHFHSS
CAN’T FIND IT?Can’t find what you’re looking for? The friendly team at your local Coventry Fasteners branch can help. Personal service is another way we’re making your job easier.Turn to back cover for your nearest branch.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SECU
RITY
92 AUSTRALIA’S FASTENER SPECIALISTS
FAST DELIVERYGRADE 304 METRIC BUTTON HEAD POST TORX® SOCKET SECURITY MACHINE SCREWS continued…
Dia. Length Pack Part No. mm mm qty
8 50 100 8X50MG304PTBHSS (RECESS SIZE: T50) 10 20 50 10X20MG304PTBHSS 10 25 50 10X25MG304PTBHSS 10 30 50 10X30MG304PTBHSS 10 35 50 10X35MG304PTBHSS 10 40 50 10X40MG304PTBHSS 10 50 50 10X50MG304PTBHSS 10 60 50 10X60MG304PTBHSS 10 65 50 10X65MG304PTBHSS 10 70 50 10X70MG304PTBHSS 10 80 50 10X80MG304PTBHSS
GRADE 304 BUTTON HEAD POST TORX® SOCKET SELF TAPPING SECURITY SCREWS
Dia. Length Pack Part No. gauge inch qty
(RECESS SIZE T10) 6 ¹⁄₂ 100 6X12G304PTBHST 6 ³⁄₄ 100 6X34G304PTBHST 6 1 100 6X1G304PTBHST 6 1 ¹⁄₂ 100 6X1.12G304PTBHST (RECESS SIZE T15) 8 ¹⁄₂ 100 8X12G304PTBHST 8 ³⁄₄ 100 8X34G304PTBHST 8 1 100 8X1G304PTBHST 8 1 ¹⁄₄ 100 8X1.14G304PTBHST (RECESS SIZE T25) 10 ¹⁄₂ 100 10X12G304PTBHST 10 ³⁄₄ 100 10X34G304PTBHST 10 1 100 10X1G304PTBHST 10 1 ¹⁄₄ 100 10X1.14G304PTBHST 10 1 ¹⁄₂ 100 10X1.12G304PTBHST (RECESS SIZE T27) 14 ³⁄₄ 100 14X34G304PTBHST 14 1 100 14X1G304PTBHST 14 1 ¹⁄₂ 100 14X1.12G304PTBHST
GRADE 304 COUNTERSUNK HEAD POST TORX® SOCKET SELF TAPPING SECURITY SCREWS
Dia. Length Pack Part No. gauge inch qty
(RECESS SIZE T15) 6 ¹⁄₂ 100 6X12G304PTCST 6 ³⁄₄ 100 6X34G304PTCST 6 1 100 6X1G304PTCST (RECESS SIZE T20) 8 ¹⁄₂ 100 8X12G304PTCST 8 ³⁄₄ 100 8X34G304PTCST 8 1 100 8X1G304PTCST 8 1 ¹⁄₄ 100 8X1.14G304PTCST (RECESS SIZE T25) 10 ¹⁄₂ 100 10X12G304PTCST
continued…
Post Hexagon Socket Self Tapping Security Screws
GRADE 304 COUNTERSUNK HEAD POST HEXAGON SOCKET SELF TAPPING SECURITY SCREWS
Dia. Length Pack Part No. inch inch qty
(RECESS A/F 5/32) 8 ¹⁄₂ 100 8X12G304PHCST 8 ³⁄₄ 100 8X34G304PHCST 8 1 100 8X1G304PHCST 8 1 ¹⁄₂ 100 8X1.12G304PHCST (RECESS A/F 5/32) 10 ¹⁄₂ 100 10X12G304PHCST 10 ³⁄₄ 100 10X34G304PHCST 10 1 100 10X1G304PHCST 10 1 ¹⁄₂ 100 10X1.12G304PHCST
Post Torx® Socket Security Screws
GRADE 304 METRIC BUTTON HEAD POST TORX® SOCKET SECURITY MACHINE SCREWS
Dia. Length Pack Part No. mm mm qty
(RECESS SIZE: T30) 6 16 100 6X16MG304PTBHSS 6 20 100 6X20MG304PTBHSS 6 25 100 6X25MG304PTBHSS 6 30 100 6X30MG304PTBHSS 6 40 100 6X40MG304PTBHSS (RECESS SIZE: T40) 8 16 100 8X16MG304PTBHSS 8 20 100 8X20MG304PTBHSS 8 25 100 8X25MG304PTBHSS 8 30 100 8X30MG304PTBHSS 8 40 100 8X40MG304PTBHSS
continued…
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SECURITY
93AUSTRALIA’S FASTENER SPECIALISTS
FAST DELIVERYALUMINIUM VANDAL PROOF BREAKAWAY NUTS
Dia. Pack Part No. inch qty
10-24 1 10-24NCAVPN ¹⁄₄ 1 14NCAVPN ⁵⁄₁₆ 1 516NCAVPN ³⁄₈ 1 38NCAVPN
Post Socket Key and Bits
POST SOCKET KEY (mm)
Length Pack Part No. mm qty
2.5 1 2.5MPHSAW 3 1 3MPHSAW 4 1 4MPHSAW 5 1 5MPHSAW 6 1 6MPHSAW
POST SOCKET KEY (inch)
Length Pack Part No. inch qty
¹⁄₈ 1 18PHSAW ⁵⁄₃₂ 1 532PHSAW ³⁄₁₆ 1 316PHSAW ⁷⁄₃₂ 1 732PHSAW
POST SOCKET BIT (mm)
Length Pack Part No. mm qty
2.5 1 2.5MPHB 3 1 3MPHB 4 1 4MPHB 5 1 5MPHB 6 1 6MPHB
POST SOCKET BIT (inch)
Length Pack Part No. inch qty
³⁄₃₂ 1 332PHB ¹⁄₈ 1 18PHB ⁵⁄₃₂ 1 532PHB ³⁄₁₆ 1 316PHB ⁷⁄₃₂ 1 732PHB
GRADE 304 COUNTERSUNK HEAD POST TORX® SOCKET SELF TAPPING SECURITY SCREWS continued…
Dia. Length Pack Part No. gauge inch qty
10 ³⁄₄ 100 10X34G304PTCST 10 1 100 10X1G304PTCST 10 1 ¹⁄₄ 100 10X1.14G304PTCST 10 1 ¹⁄₂ 100 10X1.12G304PTCST (RECESS SIZE T30) 14 ³⁄₄ 100 14X34G304PTCST 14 1 100 14X1G304PTCST
One Way Raised Countersunk Head Self Tapping Screws
GRADE 304 ONE WAY RAISED COUNTERSUNK HEAD SELF TAPPING SCREWS
Dia. Length Pack Part No. gauge inch qty
8 ¹⁄₂ 100 8X12G304OWCST 8 ³⁄₄ 100 8X34G304OWCST 8 1 100 8X1G304OWCST 8 1 ¹⁄₂ 100 8X1.12G304OWCST 10 ¹⁄₂ 100 10X12G304OWCST 10 ³⁄₄ 100 10X34G304OWCST 10 1 100 10X1G304OWCST 10 1 ¹⁄₂ 100 10X1.12G304OWCST
Vandal Proof Breakaway Nuts
GRADE 304 METRIC VANDAL PROOF BREAKAWAY NUTS
Dia. Pack Part No. mm qty
6 1 6MG304VPN 8 1 8MG304VPN 10 1 10MG304VPN 12 1 12MG304VPN
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
SECU
RITY
94 AUSTRALIA’S FASTENER SPECIALISTS
FRIENDLY SERVICEPost Torx® Socket Key and Bits
POST TORX® SOCKET KEY
Length Pack Part No. qty
T10 1 T10PTSAW T15 1 T15PTSAW T20 1 T20PTSAW T25 1 T25PTSAW T27 1 T27PTSAW T30 1 T30PTSAW T40 1 T40PTSAW T45 1 T45PTSAW T50 1 T50PTSAW
POST TORX® SOCKET BIT
Length Pack Part No. qty
T10 1 T10PTB T15 1 T15PTB T20 1 T20PTB T25 1 T25PTB T27 1 T27PTB T30 1 T30PTB T40 1 T40PTB T50 1 T50PTB
Eye Drive Bits
EYE DRIVE BITS
Size Pack Part No. qty
NO.4 1 4EDBNO.6 1 6EDBNO.8 1 8EDBNO.10 1 10EDBNO.14 1 14EDB
Contact your local Coventry Fasteners branch for more information on this product (see back of catalogue for your nearest branch).
Fastener Black Book (First Edition) The ultimate fastener reference book
• Screw thread fundamentals• Standards• Heat treatment• Thread classes• Grades• Materials & coatings• Failures & corrosion
• Thread terminology• Fastener strengths & markings• Tolerances• Hydrogen embrittlement• Screw thread profiles• Dimensional specifications
DIN / ISO / ANSI
• Galling• Material selection• Torque control• Platings• Elevated temperature
effects
A wealth of up-to-date, useful information within matt laminated greaseproof pages. Wire bound to stay flat on a workbench when reading, the Fastener Black Book is ideal for engineers, tradespeople, apprentices, machine shops, toolrooms and technical colleges.
What’s inside the Fastener Black Book:
Part No.: FASTBLACKBOOK
FREE
Thread pitch identifi catio
n ga
uge
95
WIRE ROPE/FORK TERMINALS/SWAGE TERMINALS/RIGGING SCREWSTURNBUCKLES/BALUSTRADING/FERRULES/THIMBLES/HOOKS/HINGE/PAD EYES/LAG/EYE SCREWS/U BOLTS/EYE NUTS/EYE BOLTS/SADDLESSHACKLES/SWIVELS/LATCHES/WELDED RINGS/CHAIN/LINKS/SPECIALISETOOLS/WIRE ROPE/FORK TERMINALS/SWAGE TERMINALS/RIGGINSCREWS/TURNBUCKLES/BALUSTRADING/FERRULES/THIMBLES/HOOKSHINGES/PAD EYES/LAG/EYE SCREWS/U BOLTS/EYE NUTS/EYE BOLTS/SADDLESSHACKLES/SWIVELS/LATCHES/WELDED RINGS/CHAIN/LINK/SPECIALISED TOOLS/WIRE ROPE/FORK TERMINALS/SWAGE TERMINALSHARDWARE
HA
RDW
ARE
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
96 AUSTRALIA’S FASTENER SPECIALISTS
HUGE RANGE
Contact your local Coventry Fasteners branch for more information on this product (see back of catalogue for your nearest branch). WANT TO KNOW MORE?
WHY WE STOCK IT
J&G Trading offer an extensive range of quality stainless steel hardware products including wire rope, balustrading, handrail components and marine hardware. Specialists in their field, J&G Trading provide technical advice, superior service and are proud members of the Australian Stainless Steel Development Association. Which is why J&G Trading is the stainless steel hardware brand we recommend to our customers. The entire range of J&G Trading stainless steel hardware is available through our national network of stores. Giving you a bigger choice – just another way we’re making your job easier.
Specialists in stainless steel hardware.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
HA
RDW
ARE
97AUSTRALIA’S FASTENER SPECIALISTS
HUGE RANGEWire Rope
Dia Reel Size Part No. mm m
1 305 1X1X19MG316WR 1.2 305 1.2X1X19MG316WR 1.6 305 1.6X1X19MG316WR 2 305 2X1X19MG316WR 2.5 305 2.5X1X19MG316WR 3.2 305 & 1000 3.2X1X19MG316WR 4 305 4X1X19MG316WR 5 305 5X1X19MG316WR 6 305 6X1X19MG316WR 8 305 8X1X19MG316WR 10 305 10X1X19MG316WR
GRADE 316 WIRE ROPE 1X19 CONSTRUCTION
• Smooth fi nish wire, high tensile strength, limited fl exibility and stretch • Suits applications where wire will not be subject to bending stresses• Use with standing rigging, mast stays, swage fi ttings in balustrading• Highest resistance to tea staining
Dia Reel Size Part No. mm m
0.6 305 0.6X7X7MG316WR 0.8 305 0.8X7X7MG316WR 1 305 1X7X7MG316WR 1.2 305 1.2X7X7MG316WR 1.6 305 & 1000 1.6X7X7MG316WR 2 305 2X7X7MG316WR 2.5 305 2.5X7X7MG316WR 3.2 305 & 1000 3.2X7X7MG316WR 4 305 & 1000 4X7X7MG316WR 5* 305 & 1000 5X7X7MG316WR 6* 305 6X7X7MG316WR 8* 305 8X7X7MG316WR 10* 305 10X7X7MG316WR 12* 305 12X7X7MG316WR
GRADE 316 WIRE ROPE 7X7 CONSTRUCTION
• Common semi-fl exible wire suited for balustrading and general rigging applications
• Can be used with swage fi ttings or wire rope ferrules
*Not suitable for use with wire rope ferrules.
Dia Reel Size Part No. mm m
1.2 305 1.2X7X7MG304WR 1.6 305 & 1000 1.6X7X7MG304WR 3.2 305 & 1000 3.2X7X7MG304WR 4 305 4X7X7MG304WR
GRADE 304 WIRE ROPE 7X7 CONSTRUCTION
• Semi fl exible wire suitable for internal use away from salt water and acidic environments
Dia Reel Size Part No. mm m
1.6 305 1.6X7X19MG316WR 2 305 2X7X19MG316WR 2.5 305 2.5X7X19MG316WR 3.2 305 & 1000 3.2X7X19MG316WR 4 305 & 1000 4X7X19MG316WR 5 305 5X7X19MG316WR 6 305 6X7X19MG316WR 8 305 8X7X19MG316WR 10 305 10X7X19MG316WR 12 305 12X7X19MG316WR
GRADE 316 WIRE ROPE 7X19 CONSTRUCTION
• Highly fl exible wire, suitable for running rigging, control cables, cranes and winches
• Easiest wire to hand swage
LOCAL BRANCHESWith Australia’s largest network of local specialised fastener branches there’s a Coventry Fasteners branch near you. Local branches is another way we’re making your job easier.Turn to back cover for your nearest branch.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
HA
RDW
ARE
98 AUSTRALIA’S FASTENER SPECIALISTS
BEST VALUE
Dia Reel Size Part No. mm m
3.2 305 3.2X7X19MG304WR 4 305 4X7X19MG304WR 5 305 5X7X19MG304WR 6 305 6X7X19MG304WR 8 305 8X7X19MG304WR
Total Dia Rope Dia Reel Size Part No. mm mm m
2.4 0.8 305 2.4X7X7MG316PVCWR 3 2 305 3X7X7MG316PVCWR 3.5 1.5 305 3.5X7X7MG316PVCWR 4 2 305 4X7X7MG316PVCWR 4.5 2.5 305 4.5X7X7MG316PVCWR 5.2 3.2 305 5.2X7X7MG316PVCWR 6 4 305 6X7X7MG316PVCWR 7.01 5 305 7X7X7MG316PVCWR
GRADE 304 WIRE ROPE 7X19 CONSTRUCTION
GRADE 316 WIRE ROPE 7X7 CONSTRUCTION PVC COATED
• Highly fl exible wire, suitable for internal use away from salt water and acidic environments
• PVC coated wire (clear fi nish only) • Suits safety lines, light industry and architectural applications
Fork Terminals
GRADE 316 SWAGE FORK TERMINAL
Suits Rope A D L1 L2 Part No. mm mm mm mm mm
2.5 7 5 55 24 2.5MG316SFT 3.2 8.5 5 65 32 3.2MG316SFT 4 9.5 6 77 40 4MG316SFT 5 10 8 88 57 5MG316SFT 6 14 12 106 63 6MG316SFT 8 15 14 145 85 8MG316SFT 10 22 14 149 89 10MG316SFT
GRADE 316 SWAGE FORK TERMINAL MINI TYPE
Suits Rope A D3 L1 L2 Part No. mm mm mm mm mm
3.2 7.5 5 48 24 3.2MG316MSFT
GRADE 316 INTERNAL THREADED FORK TERMINAL
T A D L1 L2 Part No.mm mm mm mm mm
6 8.5 5 65 38 6MG316ITFT
Balustrading made simplewith J&G Trading
To make the process of ordering the right stainless steel hardware for the right balustrading application easy, J&G Trading have a Pre-Made Wire Swaging service. By selecting one of the four options available (or specifying the hardware, wire type and thickness you require), you can save time by having all components assembled with the appropriate wire rope, swaged and cut to your required length. For a copy of the Pre-Made Wire Swaging Order Form, contact your local Coventry Fasteners branch (see back of catalogue for your nearest branch) or visit www.coventryfasteners.com.au
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
HA
RDW
ARE
99AUSTRALIA’S FASTENER SPECIALISTS
BEST VALUE
GRADE 316 SWAGE FORK TERMINAL TOGGLE
L1
D
L2
A
Suits Rope A D L1 L2 Part No. mm mm mm mm mm
3.2 7 6 75 38 3.2MG316SFTT 4 10 8 89 45 4MG316SFTT 5 12 9 104 51 5MG316SFTT 6 13 12 127 64 6MG316SFTT 8 17 16 163 76 8MG316SFTT 10 20 18 184 89 10MG316SFTT
GRADE 316 FORK TERMINAL SCREW WITH LOCK NUT
T A D L1 L2 Part No.mm mm mm mm mm
5* 8 5 65 43 5MG316FTS 6* 10 6 73 48 6MG316FTS 8* 10 8 84 59 8MG316FTS 10* 12 10 102 64 10MG316FTS 12* 14 12 117 82 12MG316FTS
*Also available in L/H Thread.
GRADE 316 FORK TERMINAL TOGGLE SCREW WITH LOCK NUT
A
L1
T
L2
D
T A D L1 L2 Part No.mm mm mm mm mm
6 9.5 6 83 46 6MG316FTTS 8 10.5 8 94 58 8MG316FTTS 12 13 12 225 225 12MG316FTTS 16 16.5 16 285 225 16MG316FTTS
Swage Terminals
Suits Rope E L L1 L2 Part No. mm mm mm mm mm
3.2 6/LHT 90 48 42 3.2MG316LHTSLST 3.2 6/RHT 90 48 42 3.2MG316SLST 4 6/LHT 90 48 42 4MG316LHTSLST 4 6/RHT 90 48 42 4MG316SLST
GRADE 316 LAG SCREW/SWAGE TERMINAL
• Sleek, easy to use and economical balustrade terminals • When ordering, each length must have a L/Hand and R/Hand terminal
• Features rotating head ideal for shade sails or angled balustrade sections
T Suits Rope D L L1 L2 Part No.mm mm mm mm mm mm
5 2.5 6 72 40 22 5X2.5MG316SSTT 5* 3.2 6 90 42 39 5X3.2MG316SSTT 6 2.5 6 100 38 46 6X2.5MG316SSTT 6* 3.2 6 100 48 39 6X3.2MG316SSTT 6* 4 7.5 100 48 39 6X4MG316SSTT 8* 5 9 117 57 45 8X5MG316SSTT 10 5 9 170 56 104 10X5MG316SSTT 10 6 12.5 130 63 51 10X6MG316SSTT 12 6 12.5 162 80 64 12X6MG316SSTT 12 6 13 235 63 135 12X6X13MG316SSTT 12 8 14 165 64 71 12X8MG316SSTT 16 8 16 225 90 92 16X8MG316SSTT 16 10 18 225 90 92 16X10MG316SSTT 16 12 20.5 225 92 90 16X12MG316SSTT
GRADE 316 SWAGE STUD THREADED TERMINAL WITH LOCK NUT
* Also available in L/H Thread.
L
L1 L2
TD
T Suits Rope D L L1 L2 Part No.mm mm mm mm mm mm
5 3.2 7.5 90 45 45 5X3.2MG316SSITT 6 4 8 84 28 47 6X4MG316SSITT 8 5 10 120 60 60 8X5MG316SSITT
GRADE 316 INTERNAL THREADED SWAGE STUD TERMINAL
GET TO KNOW USCoventry Fasteners is part of the publicly listed Australian company Coventry Group Ltd with a proud history of servicing mining, construction and manufacturing industries. Find out more at www.coventryfasteners.com.au
HA
RDW
ARE
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
100 AUSTRALIA’S FASTENER SPECIALISTS
BRANCHES AUSTRALIA WIDE
Suits Rope D D1 L L1 L2 Part No. mm mm mm mm mm mm
3.2 9.5 6 38 35 28 3.2MG316SBHT 4 12.5 7 54 50 44 4MG316SBHT
GRADE 316 BUTTON HEAD SWAGE TERMINAL
D
LL1
L2
D1
Suits Rope A L L1 L2 Part No. mm mm mm mm mm
2.5 6 55 49 32 2.5MG316SET 3.2 6.5 62 55 40 3.2MG316SET 4 8 77 61 45 4MG316SET 5 10 87 76 51 5MG316SET 6 12.5 106 90 64 6MG316SET 8 14.5 133 118 83 8MG316SET
GRADE 316 EYE SWAGE TERMINAL
A
L2
LL1
T Suits Rope L L1 L2 Part No.mm mm mm mm mm
6 3.2 67 38 16 6X3.2MG316MSSTT
GRADE 316 MINI THREADED SWAGE STUD TERMINAL
Thread D L L1 Part No. mm mm mm mm
5 8 42 40 5MG316AKHT 6 8 42 40 6MG316AKHT
GRADE 316 ALLEN KEY HEAD TENSIONER
• Suitable for use with threaded terminals in either stairway or horizontal balustrading applications
• Internal thread • Use with bevelled washers to complete a staircase
• Use for stairway angles with internal threaded ball
• Features rotating head ideal for shade sails or angled balustrade sections
Rigging Screws
T A D H L L1 Part No.mm mm mm mm mm mm
5 8.5 5 10 80 130 5MG316PTBJJ 6 9.5 6 10 95 150 6MG316PTBJJ 8 10.5 8 11 105 180 8MG316PTBJJ 10 12.5 10 14 125 220 10MG316PTBJJ 12 15 12 21 150 270 12MG316PTBJJ 16 23.5 14 26 190 300 16MG316PTBJJ
GRADE 316 JAW/JAW RIGGING SCREW WITH LOCK NUTS
L1
A
LH D
T A D H L L1 Part No.mm mm mm mm mm mm
6 10 6 11 146 90 6MG316PTBTT 8 10 8 16 180 105 8MG316PTBTT 10 12 9 25 212 125 10MG316PTBTT 12 14 12 25 252 150 12MG316PTBTT
GRADE 316 TOGGLE/TOGGLE RIGGING SCREW WITH LOCK NUTS
LL1 D
T
A
H
GRADE 316 EYE/EYE RIGGING SCREW WITH LOCK NUTS
LL1
T
B
T B L L1 Part No.mm mm mm mm
5 5.5 128 80 5MG316PTBEE 6 6.5 142 90 6MG316PTBEE 8 8.5 155 105 8MG316PTBEE
LOCAL BRANCHESWith Australia’s largest network of local specialised fastener branches there’s a Coventry Fasteners branch near you. Local branches is another way we’re making your job easier.Turn to back cover for your nearest branch.
HA
RDW
ARE
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
101AUSTRALIA’S FASTENER SPECIALISTS
BRANCHES AUSTRALIA WIDE
L
BL1
T
D
H
T Suits B D H L L1 Part No. Ropemm mm mm mm mm mm
5 2.5 8.5 5 9 155 80 5X2.5MG316PTBJS 5 3.2 8.5 5 9 155 80 5X3.2MG316PTBJS 6 3.2 9.5 6 10 175 95 6X3.2MG316PTBJS 6 4 9.5 6 10 175 95 6X4MG316PTBJS 8 5 10.5 8 10 205 105 8X5MG316PTBJS 10 6 12.5 10 13 230 125 10X6MG316PTBJS 12 8 15.5 12 19 290 150 12X8MG316PTBJS
GRADE 316 JAW/SWAGE RIGGING SCREW WITH LOCK NUTS
T Suits B H L L1 L2 Part No. Ropemm mm mm mm mm mm mm
5 3.2 8.5 10 105 45 25 5X3.2MG316MPTBJS
T Suits L L1 L2 Part No. Ropemm mm mm mm mm
5 3.2 185 49 39 5X3.2MG316PTBLS
T1 T2 Suits L L1 L2 L3 Part No. Ropemm mm mm mm mm mm mm
5 6 3.2 170 21 80 37 6X3.2MG316PTBST
GRADE 316 MINI TYPE JAW/SWAGE RIGGING SCREW WITH LOCK NUTS
GRADE 316 LAG/SWAGE RIGGING SCREW WITH LOCK NUTS
GRADE 316 SWAGE/THREAD RIGGING SCREW WITH LOCK NUTS
L
BL1
T
L2
H
L
L1L2 L2
L
L2L1 L3
T2
T1
T Suits B D H L L1 Part No. Ropemm mm mm mm mm mm mm
6 3.2 10 6 11 160 90 6X3.2MG316PTBTS 6 4 10 6 11 160 90 6X4MG316PTBTS 8 5 10 8 16 200 112 8X5MG316PTBTS 10 6 12 10 13 225 125 10X6MG316PTBTS 12 8 14 12 19 285 150 12X8MG316PTBTS 16 10 17 15 37 360 190 16X10MG316PTBTS 16 12 17 15 26 360 190 16X12MG316PTBTS
GRADE 316 TOGGLE/SWAGE RIGGING SCREW WITH LOCK NUTS
L
BL1
T
D
H
T Suits Rope L L1 L2 Part No.mm mm mm mm mm
5 3.2 188 80 37 5X3.2MG316PTBSS 6 3.2 198 95 37 6X3.2MG316PTBSS
GRADE 316 SWAGE/SWAGE RIGGING SCREW WITH LOCK NUTS
• In-line tensioner for long balustrading runs
LL1L2 L2
T
T D L Part No.mm mm mm
5 8 80 5MG316PTB 6 10 95 6MG316PTB 8 13 105 8MG316PTB 10 17 125 10MG316PTB
GRADE 316 RIGGING SCREW BODY ONLY
Turnbuckles
T D L L1 L2 Part No.mm mm mm mm mm
4 8 55 47 98 4MG316TBEE 5 8 70 52 120 5MG316TBEE 6 10 90 66 160 6MG316TBEE 8 14 120 94 200 8MG316TBEE 10 16 150 120 240 10MG316TBEE 12 18 200 168 300 12MG316TBEE 16 26 250 210 390 16MG316TBEE 20 28 300 260 510 20MG316TBEE
GRADE 316 EYE/EYE TURNBUCKLE WITH LOCK NUTS
• Features rotating head ideal for shade sails or angled balustrade sections
• Easy to use tensioner with timber thread
• Streamline rigging screw for fast insertion into steel posts• Use in conjunction with blind rivet nuts (M6) for fast insertion into
steel posts
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
HA
RDW
ARE
102 AUSTRALIA’S FASTENER SPECIALISTS
SPECIALIST ADVICE
T D L L1 L2 S Part No.mm mm mm mm mm mm
4 8 55 47 98 9 4MG316TBHE 5 8 70 52 120 9 5MG316TBHE 6 10 90 66 160 10 6MG316TBHE 8 14 120 94 200 11 8MG316TBHE 10 16 150 120 240 12 10MG316TBHE 12 18 200 168 300 14 12MG316TBHE 16 26 250 210 390 16 16MG316TBHE 20 28 300 260 510 18 20MG316TBHE
GRADE 316 HOOK/EYE TURNBUCKLE WITH LOCK NUTS
L2
D
L
L1S
T L L1 L2 S Part No.mm mm mm mm mm
4 55 47 98 9 4MG316TBHH 5 70 52 120 9 5MG316TBHH 6 90 66 160 10 6MG316TBHH 8 120 94 200 11 8MG316TBHH 10 150 120 240 12 10MG316TBHH 12 200 168 300 14 12MG316TBHH 16 250 210 390 16 16MG316TBHH 20 300 260 510 18 20MG316TBHH
GRADE 316 HOOK/HOOK TURNBUCKLE WITH LOCK NUTS
T A D H L1 L2 Part No.mm mm mm mm mm mm
5 8 5 9 125 70 5MG316TBJJ 6 10 6 10 145 90 6MG316TBJJ 8 11 8 10 180 120 8MG316TBJJ 10 14 10 12 220 150 10MG316TBJJ 12 15 12 21 320 198 12MG316TBJJ
GRADE 316 JAW/JAW TURNBUCKLE WITH LOCK NUTS
L2
L1
A
D
H
Miscellaneous Balustrading
D D1 D2 H Drill Hole Suits Rope Part No. mm mm mm mm mm Dia mm
6 8.8 12.5 2 8 3.2 - 5 NYG
NYLON GROMMET (BLACK ONLY)
• Nylon bush for protecting wire from cutting on sharp objects, push-fi t into posts
D D1 D2 H Drill Hole Suits Rope Part No.mm mm mm mm inch Dia mm Dia
6.5 9 12.5 2.5 11/32 3.2 - 5 NYGS
SPLIT TYPE NYLON GROMMET (BLACK ONLY)
• Nylon bush for protecting wire from cutting on sharp objects, push-fi t into posts
• Install after balustrading is installed
Suits Rope A B1 B2 D H1 H2 Part No. mm mm mm mm mm mm mm
2 10 4 14 3 18 14 2MG316WRG 3.2 12 5 16 4 24 17 3.2MG316WRG 4 13 6 18 4 24 19 4MG316WRG 5 15 7 20 6 33 24 5MG316WRG 6 15 8 22 6 33 28 6MG316WRG 8 20 10 28 8 40 34 8MG316WRG 10 28 12 35 10 50 45 10MG316WRG 12 35 14 39 12 60 51 12MG316WRG 14 31 16 42 14 57 21 14MG316WRG 16 45 18 48 14 75 60 16MG316WRG 19 50 20 53 14 80 62 19MG316WRG
GRADE 316 WIRE ROPE GRIP
DOES IT FIT?Choosing the correct fastener for the job is essential. If you’re not sure of the grade, protective coating, head type or thread for the job ask us. Specialist advice is another way we’re making your job easier. Turn to back cover for your nearest branch.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
HA
RDW
ARE
103AUSTRALIA’S FASTENER SPECIALISTS
SPECIALIST ADVICE
Thimbles
Suits Rope A B2 C D E Part No. mm mm mm mm mm mm
2 7 12 21 5 3.2 2MG304WRT 9 14 23 6 4 3.2MG304WRT 4 11 16 27 7 5 4MG304WRT 5 14 21 32 8 6 5MG304WRT 6 16 26 39 9.5 7 6MG304WRT 8 21 35 50 12 9 8MG304WRT 10 26 42 59 14 11 10MG304WRT 12 31 48 70 17.5 14 12MG304WRT 14 34 55 76 20 16 14MG304WRT 16 39 63 85 21 17 16MG304WRT
GRADE 304 WIRE ROPE THIMBLE
FerrulesNICKEL PLATED COPPER WIRE ROPE FERRULES (SWAGES)
• For use with hand and hydraulic swaging of stainless steel wire rope • Not suitable for galvanised wire rope swaging
Suits Rope Part No. mm
1.6 1.6MCOPNPHSF 2 2MCOPNPHSF 2.5 2.5MCOPNPHSF 3.2 3.2MCOPNPHSF 4 4MCOPNPHSF 5 5MCOPNPHSF 6 6MCOPNPHSF
Suits Rope Part No. mm
1 1MCOPNPMSF 1.6 1.6MCOPNPMSF 2 2MCOPNPMSF 2.5 2.5MCOPNPMSF 3.2 3.2MCOPNPMSF 4 4MCOPNPMSF 5 5MCOPNPMSF 6 6MCOPNPMSF 8 8MCOPNPMSF 10 10MCOPNPMSF 12 12MCOPNPMSF
Hand Swaging - Creased Machine Swaging
COPPER WIRE ROPE FERRULES (SWAGES)
• Copper fi nish for use with hand and hydraulic swaging of stainless steel wire rope
• Not suitable for galvanised wire rope swaging
Suits Rope Part No. mm
2 2MCOPHSF 2.5 2.5MCOPHSF 3.2 3.2MCOPHSF 4 4MCOPHSF 5 5MCOPHSF 6 6MCOPHSF
Suits Rope Part No. mm
2 2MCOPMSF 2.5 2.5MCOPMSF 3.2 3.2MCOPMSF 4 4MCOPMSF 5 5MCOPMSF 6 6MCOPMSF 8 8MCOPMSF 10 10MCOPMSF 12 12MCOPMSF
Hand Swaging - Creased Machine Swaging
ALUMINIUM WIRE ROPE FERRULES (SWAGES)
• Aluminium sleeves to suit hand and hydraulic swaging of galvanised wire rope
• Not suitable for swaging stainless steel wire rope
Suits Rope Part No. mm
1.6 1.6MALHSF 2 2MALHSF 2.5 2.5MALHSF 3/3.5 3.2MALHSF 4 4MALHSF 5 5MALHSF 6 6MALHSF 8 8MALHSF
Suits Rope Part No. mm
1 1MALMSF 1.6 1.6MALMSF 2 2MALMSF 2.5 2.5MALMSF 3 3MALMSF 3.5 3.5MALMSF 4 4MALMSF 5 5MALMSF 6 6MALMSF 8 8MALMSF 10 10MALMSF 12 12MALMSF
Hand Swaging - Creased Machine Swaging
ONLINE CATALOGUEVisit www.coventryfasteners.com.au to view current list prices for all products in our Stainless Steel, Industrial and Construction Fasteners catalogues. Current list prices at the click of a button – it’s just another way we’re making your job easier.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
HA
RDW
ARE
104 AUSTRALIA’S FASTENER SPECIALISTS
FAST DELIVERY
GRADE 316 EYE GRAB HOOK
B E L R Part No. mm mm mm mm
12 8.5 77 78 6MG316EGH 15 11 88 90 8MG316EGH 16.5 12.5 102 104 10MG316EGH 22 16.5 134 136 12MG316EGH
Hooks/Hinges
GRADE 304 S HOOK
D A B L Part No.mm mm mm mm
5 9 8.5 50 5MG304SH 6 12 11 60 6MG304SH 8 16 15 75 8MG304SH 9 18 17 85 9MG304SH 10 18 18 100 10MG304SH
GRADE 316 SPRING HOOK WITH EYELET
D A1 B E L Part No.mm mm mm mm mm
4 9 6.5 7 40 4MG316ESH 5 10 7.5 8 50 5MG316ESH 6 13 9 9 60 6MG316ESH 8 13 11.5 9 80 8MG316ESH 10 16 14 12 100 10MG316ESH 11 18 16.5 16 120 11MG316ESH
GRADE 316 SPRING HOOK
D A A1 E L Part No.mm mm mm mm mm
4 5 9 7 40 4MG316SPH 5 6 10 8 50 5MG316SPH 6 8 13 9 60 6MG316SPH 8 8 13 9 80 8MG316SPH 10 10 16 12 100 10MG316SPH 11 11 18 16 120 11MG316SPH
GRADE 316 CAST SNAP HOOK
L D S W Part No. mm mm mm mm
50 8 10 25 50MG316CSH 70 12 11 31 70MG316CSH 100 16 15 50 100MG316CSH
GRADE 316 ASYMMETRIC SPRING HOOK
D A B C L W Part No.mm mm mm mm mm mm
6 7 10 10 61 35 6MG316ASH 8 11 13 13 81 48 8MG316ASH 10 13 15 15 102 58 10MG316ASH 12 16 21 21 122 70 12MG316ASH
GRADE 316 SAFETY SNAP HOOK WITH SAFETY LATCH
E C C1 D H L Part No.mm mm mm mm mm mm
19 21 22 9 73 102 19MG316SSHL 28 21 25 11 81 127 28MG316SSHL
GRADE 316 SWIVEL EYE SNAP
A B D L Part No.mm mm mm mm
16 10 5 83 16MG316SES 19 12 6 94 19MG316SES 22 15 7 113 22MG316SES
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
HA
RDW
ARE
105AUSTRALIA’S FASTENER SPECIALISTS
FAST DELIVERY
GRADE 304 OBLONG PAD EYE
D A B d H h W Screw Part No.mm mm mm mm mm mm mm Size
5 30 35 4.2 19 12 14 6 5MG304EP 6 35 40 4.2 26 17 18 8 6MG304EP 8 40 50 5.2 33 22 20 10 8MG304EP
Pad Eyes
GRADE 304 OVAL PAD EYE
D A B1 B2 d H W Screw Part No. mm mm mm mm mm mm mm Size
5 15 45 35.5 4.2 20 14 6 5MG304OEP 6 20 60 46 5.2 25 16 8 6MG304OEP 8 26 80 60 5.2 32 20 10 8MG304OEP
GRADE 304 DIAMOND PAD EYE
D A B d H h W Screw Part No.mm mm mm mm mm mm mm Size
5 37 59 4.2 22 12 11 6 5MG304DEP 6 40 64 4.2 26 15 15 8 6MG304DEP 8 50 80 5.2 33 20 18 10 8MG304DEP
GRADE 304 ROUND PAD EYE
A1A2
H
dW
h
A1 A2 d H h W Screw Part No.mm mm mm mm mm mm Size
33 19.5 4.2 20 12 13 6 5MG304REP 40 23 4.2 26 17 17 8 6MG304REP 50 29.5 5.2 32 21 20 10 8MG304REP
GRADE 304 ROUND PAD EYE BOLT
D A B H h T W Part No.mm mm mm mm mm mm mm
5 33 20 20 12 6 13 5MG304REPB 6 40 23 26 17 8 17 6MG304REPB 8 50 25 32 20 10 20 8MG304REPB
GRADE 316 LAG SCREW EYE
D2
L1D
LL2
D D2 L L1 L2 Part No.mm mm mm mm
4 4.2 30 45 51 4MG316LSE 6 6.3 32 55 65 6MG316LSE 8 8.4 40 60 70 8MG316LSE 10 10.5 55 80 100 10MG316LSE 12 12.5 65 105 123 12MG316LSE
Lag/Eye Screws
• Stainless steel cast one piece anchoring eye • Suitable for use in timber posts for fi xing shade sails
GRADE 316 COACH SCREW WITH EYE
H
A
GB
EF
C
A
D
L
A B C D F G H L Part No.mm mm mm mm mm mm mm mm
5 50 28 11.5 10 6 21 77 5X50MG316CSE 6 60 35 14.5 11.5 7 25 91 6X60MG316CSE 8 80 48 18 16 8 34 121 8X80MG316CSE 10 60 35 22 19.5 10.5 39 110 10X60MG316CSE 10 100 60 22 20 10 42 152 10X100MG316CSE 12 120 72 27 23 12 51 182 12X120MG316CSE
CAN’T FIND IT?Can’t find what you’re looking for? The friendly team at your local Coventry Fasteners branch can help. Personal service is another way we’re making your job easier.Turn to back cover for your nearest branch.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
106 AUSTRALIA’S FASTENER SPECIALISTS
FRIENDLY SERVICE
Saddles
HA
RDW
ARE
GRADE 304 U BOLT WITH NUT & WASHER
T A B D L Part No.mm mm mm mm mm
5 35 40 5 80 5X80MG304UBNWK 6 35 40 6 90 6X90MG304UBNWK 8 35 40 8 80 8X80MG304UBNWK 8 35 50 8 100 8X100MG304UBNWK 10 50 55 10 130 10X130MG304UBNWK 12 60 65 12 150 12X150MG304UBNWK
U Bolts
GRADE 304 U BOLT WITH NUT & WASHER FOR TUBE
L
B
DA
T
T A B D L Tube Part No.mm mm mm mm mm inch
6 26 20 5.5 44 ³⁄₄ 6X44MG304UBNWK 6 32 26 5.5 50 1 6X50MG304UBNWK 6 38 26 5.5 58 1 ¹⁄₄ 6X58MG304UBNWK 8 48 38 7 82 1 ¹⁄₂ 8X82MG304UBNWK 8 61 38 7 90 2 8X90MG304UBNWK 8 70 37 7 97 2 ¹⁄₂ 8X97MG304UBNWK
GRADE 316 EYE NUT
H
A C
T
B
D
T A B C D H Part No.mm mm mm mm mm mm
6 26 16 5 13 28.3 6MG316EN 8 32.6 20 6.3 16 33.3 8MG316EN 10 41 25 8 20 41.5 10MG316EN 12 50 30 10 25 51 12MG316EN 16 60 35 12.5 30 60 16MG316EN 20 72 40 16 35 71 20MG316EN 24 90 50 20 45 90 24MG316EN
Eye Nuts
GRADE 304 SADDLE (WIRE EYE STRAP)
D d H h L1 L2 W Screw Part No. mm mm mm mm mm mm mm Size g
4 3.2 16 11 40 32 10 5 4MG304WES 5* 4.2 16 13 51 40 11 6 5MG316WES 6 5.2 22 16 57 44 14 8 6MG304WES 8 5.2 25 17 63 47 11 8 8MG304WES
GRADE 316 EYE BOLT WITH COLLAR
h
A
B
H
T
D
T A B D H h Part No.mm mm mm mm mm mm
6 26 16 13 41 15 6MG316CEB 8 32 20 16 50 15 8MG316CEB 10 40 25 20 63 21 10MG316CEB 12 49 30 25 74 23 12MG316CEB 16 60 35 30 87 28 16MG316CEB 20 70 40 35 103 32 20MG316CEB 24 89 50 50 130 40 24MG316CEB
Eye Bolts
GRADE 304 EYE BOLT WITH NUT & TWO WASHERS
T B
L2L1
L
T B L L1 L2 Part No.mm mm mm mm mm
5 13 50 53 76 5X50MG304EB 6 16 38 40 63 6X40MG304EB 6 16 50 53 81 6X50MG304EB 6 16 60 60 83 6X60MG304EB 6 16 80 80 104 6X80MG304EB 6 16 100 103 126 6X100MG304EB 8 19 60 65 100 8X60MG304EB 8 19 80 85 117 8X80MG304EB 8 19 90 96 126 8X90MG304EB 8 19 100 106 140 8X100MG304EB 8 19 130 135 170 8X130MG304EB 10 24 80 85 126 10X80MG304EB 10 24 110 115 148 10X110MG304EB 10 24 160 165 208 10X160MG304EB 12 20 110 115 156 12X110MG304EB 12 20 150 155 198 12X150MG304EB 16 38 130 145 218 16X130MG304EB
T
LB
D A
*Grade 316
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
107AUSTRALIA’S FASTENER SPECIALISTS
FRIENDLY SERVICEH
ARD
WA
RE
GRADE 316 STANDARD D SHACKLE
A B D L Part No.mm mm mm mm
4 8 8 16 4MG316DS 5 10 10 20 5MG316DS 6 12 12 24 6MG316DS 8 16 16 32 8MG316DS 10 20 20 40 10MG316DS 12 24 24 48 12MG316DS 16 32 32 64 16MG316DS 19 38 38 76 19MG316DS
Shackles
GRADE 316 CAPTIVE PIN D SHACKLE
A B D L Part No.mm mm mm mm
5 10 10 20 5MG316CPDS 6 12 12 24 6MG316CPDS 8 16 16 32 8MG316CPDS 10 20 20 40 10MG316CPDS 12 24 24 48 12MG316CPDS
GRADE 304 LIGHT WEIGHT D SHACKLE
L
B T
A
D
T
A B D L T Part No.mm mm mm mm mm
4 10 9.5 22 1.8 4MG304LWDS 5 12 12 28 2 5MG304LWDS 6 14 14.6 30 3 6MG304LWDS 8 18 18 48 4 8MG304LWDS
GRADE 316 LONG D SHACKLE
A B D L Part No.mm mm mm mm
4 8 8 32 4MG316LDS 5 10 10 40 5MG316LDS 6 12 12 48 6MG316LDS 8 16 16 64 8MG316LDS 10 20 20 80 10MG316LDS 12 24 24 96 12MG316LDS
GRADE 316 BOW SHACKLE
A B D L R Part No.mm mm mm mm mm
5 10 10 20 17 5MG316BS 6 12 12 24 21 6MG316BS 8 16 16 32 28 8MG316BS 10 20 20 40 34 10MG316BS 12 24 24 48 42 12MG316BS 16 32 32 64 56 16MG316BS 22 44 44 88 77 22MG316BS
GRADE 316 TWISTED SHACKLE
A B D L Part No.mm mm mm mm
4 8 14 24 4MG316TS 5 10 17 20 5MG316TS 6 12 21 24 6MG316TS 8 16 28 16 8MG316TS 10 20 34 40 10MG316TS 12 24 42 48 12MG316TS
LOCAL BRANCHESWith Australia’s largest network of local specialised fastener branches there’s a Coventry Fasteners branch near you. Local branches is another way we’re making your job easier.Turn to back cover for your nearest branch.
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
108 AUSTRALIA’S FASTENER SPECIALISTS
HUGE RANGEH
ARD
WA
RE
GRADE 316 EYE/EYE SWIVEL
A B B1 L L1 Part No. mm mm mm mm mm
6 26 15 65 15 6MG316EES 8 35 20 90 22 8MG316EES 10 44 24 115 27 10MG316EES 12 48 25 128 28 12MG316EES
Swivels
GRADE 316 EYE/JAW SWIVEL
D B B1 C L Part No.mm mm mm mm mm
6 12 15 11 66 6MG316EJS 8 16 20 16 94 8MG316EJS 10 20 24 22 118 10MG316EJS 12 26 32 28 152 12MG316EJS
GRADE 316 JAW/JAW SWIVEL
D B C L Part No.mm mm mm mm
6 12 11 66 6MG316JJS 8 16 16 94 8MG316JJS 10 20 22 118 10MG316JJS 12 26 28 152 12MG316JJS
GRADE 304 ROUND RING (WELDED)
D H Part No.mm mm
4 25 4X25MG304RR 5 35 5X35MG304RR 6 40 6X40MG304RR 6 50 6X50MG304RR 8 50 8X50MG304RR 8 75 8X75MG304RR 10 75 10X75MG304RR 10 80 10X80MG304RR
Welded Rings
• Alternate sizes available on request
GRADE 304 DEE RING (WELDED)
D H L Part No.mm mm mm
4 22 25 4X25MG304DR 4 25 30 4X30MG304DR 6 37 40 6X40MG304DR 6 47 50 6X50MG304DR 8 47 50 8X50MG304DR 10 47 50 10X50MG304DR
• Alternate sizes available on request
GRADE 304 TRIANGLE RING (WELDED)
D A L Part No.mm Degrees mm
6 60 50 6X50MG304TR 8 60 50 8X50MG304TR
• Alternate sizes available on request
FASTER ORDERINGDon’t forget to quote the part number when ordering. Quick and efficient ordering is another way we’re making your job easier.Turn to back cover for your nearest branch.
Latches
Length Part No. mm
100 TL1135 TL2
GRADE 304 TOGGLE LATCH
ORDER BY PHONE, FAX, MAIL OR VISIT YOUR LOCAL BRANCHDETAILS ON THE BACK OF THIS CATALOGUE
109AUSTRALIA’S FASTENER SPECIALISTS
HUGE RANGEH
ARD
WA
RE
GRADE 316 MEDIUM LINK POLISHED CHAIN
D L W Part No.mm mm mm
2 16 7.5 2MG316CH 3 25 11 3MG316CH 4 26.8 15.5 4MG316CH4.9 30 18 5MG316CH 6 38 24 6MG316CH 8 48 28.5 8MG316CH 10 60 38 10MG316CH 12 74 43 12MG316CH
Chain
• A quality 316gr polished chain to Australian standard sizes• Sold per metre• Mill & Tensile reports available on request
• No welding required
Links
GRADE 316 CHAIN LINK CLIP
D A B L L1 Part No.mm mm mm mm mm
6 9 24 24 36 6MG316CL 8 12 30 32 48 8MG316CL 9 13 34 36 54 9MG316CL 11 17 41 44 66 11MG316CL 16 24 59 64 96 16MG316CL
GRADE 316 QUICK LINK
B
L
D
G
D B G L Part No.mm mm mm mm
4 12 6 33 4MG316QL 5 13 7 39 5MG316QL 6 14 8 46 6MG316QL 8 18 9 60 8MG316QL 10 22 13 72 10MG316QL
WIRE ROPE CUTTER
L Cut Dia Part No.mm mm
180 0.6 - 4 AC-8
Specialised Tools
• Quality OPT wire rope cutter suitable for cutting 0.6 - 4mm rope
HAND SWAGER
L Wire Swage Dia Part No. mm mm
255 1/1.5/2 HS10 350 2/2.5/3.2 HS14 460 1.6/2.5/3.2/4 HS18 600 2/2.5/3.2/4/5 HS24 635 6 HS25
• For swaging of wire rope ferrules only
A WIDE SELECTION OF STAINLESS STEEL MARINE HARDWAREIS ALSO AVAILABLE
INCLUDING ROPE CLEATS, PELICAN HOOKS,
ANCHORS, RAIL FITTINGSAND CANOPY FITTINGS.
Call your nearest branchnow for more details.
TERMS AND CONDITIONS OF SALE110
4. DELIVERY AND COSTS
CGL may, but is not obliged to, deliver the goods to the customer’s premises, in accordance with CGL usual practices, but if:
(a) the customer requests another method of delivery; or
(b) CGL elects to use an independent courier to deliver the goods,
CGL may arrange another form of transport with that independent courier by a separate contract, and the customer must pay to CGL on demand any costs of that courier incurred by CGL.
5. TITLE AND PROPERTY
The title to and property in the goods will not pass from CGL to the customer until the customer has paid the contract price in full (other than the costs of any independent courier referred to in clause 4) to CGL in accordance with these conditions. Until then, the customer holds the goods in a fiduciary relationship with CGL as bailee only, must keep the goods separate from other items it holds and must not resell or transfer possession of the goods.
If the customer:
(a) fails to pay the contract price in full when due;
(b) pays for the goods by cheque (in whole or in part) and that cheque is not met on presentation;
(c) commits any act of bankruptcy, becomes bankrupt, or is insolvent under administration, as defined in section 9 of the Corporations Act;
(d) is or becomes insolvent within the meaning as given by any of section 9 and subsection 95A (2) of the Corporations Act or regulation 7.5.02 of the Corporations Regulations; or
(e) has a controller appointed, as defined in section 9 of the Corporations Act, in respect of any of the customer’s property;
CGL may:
(1) enter onto the premises where the goods are situated; and (2) repossess the goods, notwithstanding that the goods may
have been affixed to any structure by CGL or the customer, and if necessary for that purpose, may sever the goods from any structure to which they may have been affixed.
If CGL repossesses the goods, it reserves the right to resell them.
The customer must also indemnify and keep CGL indemnified against, and pay to CGL, all expenses, losses and damages incurred or sustained by CGL as a result of, or in relation, to CGL exercising its rights under:
(a) this clause;
(b) under any other term, express or implied, of these conditions; or
(c) otherwise at law or in equity, and any bank or other costs, charges or expenses incurred by CGL resulting from any customer’s cheque not being met on presentation.
1. INTERPRETATION
In these conditions, unless the contrary intention appears:
contract means any contract or agreement whatsoever made by CGL to supply any goods or services to the customer, whether resulting from the acceptance by CGL of an order given by the customer or otherwise;
contract price means the total of the prices specified for the Supply by CGL to the customer;
CGL means Coventry Group Ltd (ABN 37 008 670 102) of 525 Great Eastern Highway, Redcliffe, Western Australia;
customer means the customer of CGL who buys goods or to whom CGL supplies any services;
goods means any or all of the products the subject of Supply by CGL to a customer;
GST in relation to a Supply, has the same meaning as in the A New Tax System (Goods and Services Tax) Act 1999 (Cth);
order means any offer to purchase the goods from CGL made by a customer;
price means, in relation to any goods, the price of those goods;
services means any or all of the services (if any) the subject of Supply by CGL to a customer;
Supply means the supply of any goods, services or other things the subject of any contract; and
Tax means sales tax, GST, value added tax, retail tax or any other tax or duty that may be imposed on or in relation to any Supply made by CGL.
2. CONDITIONS
These conditions:
(a) will form part of any contract and constitute a complete and exclusive statement of the agreements between CGL and the customer with respect to their subject matter (despite any conditions to a contrary effect which may be expressed in any of the customer’s order forms or other documents);
(b) will apply to any Supply by CGL, whether in accordance with any order, contract, or otherwise; and
(c) may be varied only by writing signed by an authorised officer of CGL.
3. TERMS OF PAYMENT
Time for payment of the price for any Supply is of the essence in any contract. If CGL:
(a) accepts an order, and CGL has not agreed in writing to extend credit to the customer, the customer must pay the contract price to CGL in full on delivery of the goods or services; or
(b) has agreed in writing to extend credit to the customer, the customer must pay the contract price to CGL in full prior to the end of the month following the date of the tax invoice sent by CGL in relation to that Supply.
TERMS AND CONDITIONS OF SALE 111
10. TAXES
Unless otherwise expressly agreed by or shown on an invoice issued by CGL, the prices specified do not include Taxes. The customer will be liable for all such Taxes and in the case of GST or any other amount payable by the customer on account of Taxes, the customer will reimburse to CGL, on demand, the full amount of such Taxes.
11. LIMITATION OF LIABILITY
Except as otherwise expressly provided in these conditions, and subject to the succeeding paragraphs, CGL excludes all statements, representations, warranties, conditions, promises, undertakings, covenants and other provisions, express or implied (and whether implied by law (including Act of Parliament) or otherwise), relating to the order, the goods or services (whether as to their quality, fitness for any purpose, correspondence with any description or sample or otherwise), or their delivery being provisions that might otherwise form part of these conditions, or any contract, or be collateral to or form part of any agreement that is collateral to these conditions, or any contract.
Subject to the next paragraph, CGL will not be liable to compensate or indemnify the customer for any loss or damage suffered or incurred by the customer in relation to the order, the goods, or the services, or their delivery, mis-delivery or non-delivery (including but not limited to any loss of profits or other economic loss or to loss arising from negligence or any other taught, in any case, whether direct, indirect, consequential or otherwise).
These conditions do not, and no provision of these conditions purports to exclude, restrict or modify or have the effect of excluding, restricting or modifying:
(a) the application in relation to the supply of the goods or services of any provision of the Trade Practices Act 1974 or of any similar State or Federal legislation that may not be excluded, restricted or modified;
(b) the exercise of a right conferred by such provision; or
(c) subject to the next paragraph, any liability of CGL for breach of a condition or warranty implied by such a provision. CGL liability for a breach of a condition or warranty implied by a provision of Division 2 of Part V of the Trade Practices Act 1974, or of any similar State or Federal legislation where CGL may similarly limit its liability, will be limited to any one of the following:
(a) in the case of goods:
(1) the replacement of the relevant goods or the supply of equivalent goods;
(2) the repair of the relevant goods; (3) the payment of the costs of replacing the relevant
goods, or of acquiring equivalent goods; or (4) the payment of the costs of having the relevant goods
repaired; and
(b) In the case of services:
(1) the supply of the services again; or (2) the payment of the cost of having the relevant services
supplied again, and CGL may in its sole discretion determine which of the foregoing limits will apply in any case.
12. GOVERNING LAW
Any Supply by CGL to the customer, and these conditions, will be governed by the laws of or applicable in the Australian state or territory where the goods are delivered or the services are supplied to the customer (or if outside Australia, then by the laws applicable in the Australian state or territory from which the goods or services are supplied).
6. RETURNS POLICY
Subject to the requirements of any law, CGL:
(a) may consider, but is not obliged to allow, goods to be returned for credit, if:
(1) the goods are returned in good and resalable condition, in the original packaging;
(2) the customer first pays all freight and other charges to deliver the goods to CGL premises and CGL will not accept any goods sent, or pay for, “freight forward”; and
(3) the customer first supplies to CGL the original tax invoice number and date of supply.
(b) may, in its sole discretion, allow the following credits for goods returned:
(1) for goods returned within 30 days of tax invoice – full credit;
(2) for goods returned between 30 and 60 days of tax invoice – tax invoice value less 15%; and
(3) for goods returned after 60 days – no credit (unless CGL agrees otherwise, in its sole discretion).
(c) will not allow credits for:
(1) any goods: • specifically cut to length; • specially made, treated or purchased for the customer; • damaged or altered in any way by the customer; or • being electrical or non-stock lines; or
(2) any freight and delivery fees.
If CGL accepts any goods returned for credit:
(a) CGL may issue a credit note after it has inspected the goods and found them satisfactory, in its sole discretion; and
(b) if CGL decides not to issue a credit note, CGL will:
(1) so inform the customer; and (2) make the goods made available at CGL premises for the
customer to collect.
7. SHORTAGES
The customer must report all shortages of goods from the quantities described in the invoice within 24 hours of delivery of the goods otherwise the customer may not make any claim against CGL for any such shortages.
8. CONSEQUENTIAL LOSS
The customer’s sole remedy for any defective goods or services will be the repair or replacement of the defective goods or for the re-supply of the defective services.
CGL liability for any breach of any warranty or of any term, express or implied, of any contract in relation to any Supply, will not extent in any circumstances to loss of profits, or other economic loss, or to loss arising from negligence or any other tort, in any case, whether direct, indirect, special, consequential or otherwise.
9. RISK AND INSURANCE
Notwithstanding clauses 4 and 5, the goods will be at the customer’s risk after they leave CGL premises.
If the customer requests it in writing, CGL may, at the customer’s expense, insure the goods.
Did you know Coventry Fasteners also supplies industrial, construction and specialised fasteners, as well as industrial tools and consumables? That’s why we’re Australia’s fastener specialists. With a huge range of fasteners and tools to choose from, you’ll find everything you need at your local Coventry Fasteners branch.
More fasteners,tools and consumablesto make your job easier.
INDUSTRIALFASTENERS
– bolts, all types
– threaded rod
– petrochemical studbolt assemblies
– nuts, all types
– small fasteners
– structural assemblies
– washers, all types
– socket fasteners
– purlin assemblies
– coach screws
– eye bolts
– flanged purlin bolts & nuts
STAINLESS STEEL FASTENERS & HARDWARE
– bolts
– threaded rod
– rigging screws/turnbuckles
– nuts
– small fasteners
– eye bolts
– washers
– socket fasteners
– spring and snap hooks
– balustrade fittings
– wire rope
– marine cleats & hooks
CONSTRUCTION FASTENERS
– masonry anchors
– drop in anchors
– rivets
– chemical anchors
– chemical injection
– collated timber fixing systems
– self drilling screws
– chemical studbolts
– powder actuated systems
– through bolts
– nylon anchors & plugs
– structural assemblies
– screw anchors
– hollow wall anchors
– silicones, sealants, grouts
SPECIALISED FASTENER PRODUCTS & SYSTEMS
– petrochemical studbolt assemblies
– security fasteners
– tunnel fasteners
– U Bolts, J Bolts
– thread repair systems
– bolt securing systems
– rail fastenings
– lifting gear
– plow bolts
– rock bolts
– dowel, cotter& spring pins
ASSOCIATED INDUSTRIAL TOOLS & CONSUMABLES
– cutting tools, blades & holesaws
– lubricants and cutting components
– industrial power tools
– abrasives (cutting, grinding & coated products)
– adhesives & resins
– industrial hand tools
– safety gear
– hand cleaners
– brushware
– measuring equipment