course on “structural designs of buildings” workshop flyer.pdf · tel/fax: + 0112698726,...
TRANSCRIPT
“STRUCTURAL DESIGNS OF BUILDINGS”
COURSE ON
Commences on Saturday 06th Of July 2019till 3rd August 2019.
Duration - Six Consecutive Saturdays8.30 am to 4.30 pm.
Room No. 22, 2nd Floor,Intitute of Engineer’s Building,
120/15, Wijerama Mawatha,Colombo 07, Sri Lanka.
Tel/Fax: + 0112698726, E-mail:[email protected]
TARGET GROUP
Practicing Engineers
COURSE FEE
Rs. 38,000 / -
Rs. 40,000 / -(Lunch & Course Materials Provided)
VENUE:
Auditorium, Distance learning center4th Floor, SLIDA Building.
Contact:
Aelien / Indika on+94112698726
for early birds before 15th of May 2019
COURSE OBJECTIVES
Training and giving quali�ed guidance topracticing structural design engineers tocarry out Structural designs of Buildingto International Standards.
EXPECTED LEARNING OUTCOME
Design of Structural system of Buildings(in all three categories namely, Low-rise,Medium rise and High-rise buildings).
Design development and Detail designs.
Structural optimizations.
COURSE CONTENTS
Admiration of the Architectural drawings.
Computer Based Structural Analysis.
Computer based structural design ofSub structure and Super Structure.
Development of Structural Drawings.
Development of Structural design report.
Hands on experience.
RESOURCE PERSONS
Eng. S. A. KarunaratneBSc.Eng (Hons), MICE, FIStructE,HFIE(SL), Hon FSSE(SL), CEng
Eng. K. L. S. Sahabandu
Eng. N. Abeysuriya,
Eng. R. M. A. SenarathBSc.Eng (Hons), CEng, FIE(SL), FSSE(SL)
Eng. A. S. B. Edirisinghe BSc.Eng (Hons), CEng, MIE(SL),PG Dip( Struct. Eng. Design), FSSE(SL)
Eng. D. T. Rajasekaran BSc.Eng (Hons), CEng, FIE(SL), MEng
Eng. W. J. B. S. Fernando
Eng. S. U. Jayakody
Eng. (Mrs.) T. J. Jayasundara
Eng. S. S. A. Kalugaldeniya
Preparation of Structural designreport & Speci�cations.
Development of Basis for Structural design.
Development of Structural systems andselection of Structural Materials.
Static and Dynamic Loads.
Design Developments for Deep Basement and Foundation Structures
Features and incorporation of MEP requirements.
BSc.Eng (Hons), Pg.Dip.(Hyd),M.Sc(Structures),
CEng, MIE(SL), MICE, MConsE(SL), FSSE(SL)
BSc.Eng (Hons), CEng, FIE(SL), FSSE(SL), IntPE(SL), MEng (Struct. Eng. Design), MConsE(SL)
BSc.Eng (Hons), CEng, MIE(SL), MSSE(SL)
BSc.Eng (Hons), CEng, MIE(SL), MEng, MSSE(SL)
BSc.Eng (Hons), CEng, MIE(SL), MEng, MSSE(SL)
BSc.Eng (Hons), CEng, MIE(SL), MSc, MSSE(SL)