The Entry Level Cost Effective Laminator by TECHNOLAMI

Type of application solvent-less lamination Type of adhesive bi-component adhesive Roll width 1.000 mm Web width min/max 500 / 950 mm Max coating width 950 mm Mechanical speed 350 m/min Working speed (*) 300 m/min Unwinder type shaftless Rewinder type shaftless Primary unwinder reel diam. max 850 mm Secondary unwinder reel diam. max 850 mm Rewinder reel diam. max 850 mm Primary unwinder reel weight max 800 kg Secondary unwinder reel weight max 800 kg Rewinder reel weight max 800 kg Primary unwinder core diam. (with optional adaptors) 76 mm (152 mm) Secondary unwinder core diam (with optional adaptors) 76 mm (152 mm) Rewinder core diam 152 mm Web pulling power on primary unwinder min/max 20 / 350 N Web pulling power on secondary unwinder min/max 20 / 350 N Web pulling power on rewinder min/max 20 / 350 N A/C motors 3 x 400 V – 50 Hz ± 10% Auxiliary 24 V Installed electric power 75 kW (indicative) Compressed air pressure (**) 700 kPa – (7 bar) dry not lubricated air Compressed air consumption 80 l/min Cooling water Water temperature 12 - 14 °C Water pressure 300 kPa – (3 bar) Water consumption 30 l/min Water hardness (CaCO3) 2,5 - 4,0 mg/l Execution not suitable for explosion atmosphere Noise level at 1,5 m 80 dBA (DIN 45635 1/27) Color standard white/red Layout drawing n. LO408003 Machine construction CE directives

(*) Working speed depends from type of material, adhesive and applied adhesive as well as the skillfulness of the operator (**) Compressed air delivery value shall be given upon placement of order and it will be expressed in cu.m/sec. under normal conditions: temperature 20°C, relative huimidity 65%, pressure 101300 Pa (1013 mbar), according to norms ISO R554 and ISO R558

Countess standard

Technical data Technolami COUNTESS

Mechanical speed 350 m/min

Coating width available 600mm – 1300 mm (other upon request)

Max roll diameter / weight 850 mm / 800kg

Alignment control Automatic

Type of unwinders / winder Shaftless 3” and 6”

Coating section frame thickness 50mm

First and second dosing cylinder, coating cylinder

and laminating cylinder type

Double wall inside spiraled

Coating nip roller Diam 145mm

Tension control at unwind and rewinder Load cells

Opening gap of transfer roller 120mm

Taper tension at rewinder Yes

Adjusting aligning rollers after coating and before

lamination

Yes both included

Sleeve change for transfer roller Yes with trolley

Aluminum idler rollers 18 by 120mm diam + 2 x 150 mm

Position of rewinder Inside the frame

Main technical features

• Unwinders up to 850mm diam. with magnetic brake

• Automatic centerting system

• Rewinder up to 850mm diam. with servo motor

• Four roll coating system

• Two integrated thermoconditioning units

• Integrated control cabinet

• Easy access to the coating area

• Equipped trolley for sleeve change

Type of material Unwinder 1 Unwinder 2 Rewinder

Paper 20 –100 g/m2 20 – 100 g/m2 Up to 150 g/m2 (tension max. 35 kg)

BOPP metallized film 12 – 80 12 – 80 Up to 150 g/m2 (tension max. 35 kg)

PET 12 – 25 8 – 30 Up to 150 g/m2 (tension max. 35 kg)

Printed PPP 20 – 150 20 – 150 Up to 150 g/m2 (tension max. 35 kg)

LDPE 30 – 200 20 – 200 Up to 150 g/m2 (tension max. 35 kg)

HDPE 30 – 200 15 – 200 Up to 150 g/m2 (tension max. 35 kg)

Rigid PVC 20 – 100 15 – 100 Up to 150 g/m2 (tension max. 35 kg)

Nylon 20 – 130 20 – 130 Up to 150 g/m2 (tension max. 35 kg)

BOPA 12 – 50 12 – 50 Up to 150 g/m2 (tension max. 35 kg)

Aluminum 10 – 40 6,5 – 50 Up to 150 g/m2 (tension max. 35 kg)

The range of materials to be treated is an example and is not binding

Range of materials suitable for lamination