costco warehouse process improvement project - final report, the profit prophets ime223
TRANSCRIPT
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
1/24
Costco Project Final Report
The Profit Prophets
Jonathan Choi, Chris Ragasa, Kyle Rosemark
Karen Bangs
IME 223-02
4 December, 2013
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
2/24
1
To: Karen Bangs
From: The Profit Prophets (Jonathan Choi, Chris Ragasa, Kyle Rosemark)
Date: December 4, 2013
Subject: Costco Liquor Department Evaluation and Report
EXECUTIVE SUMMARY
The goal of this project was to observe the Liquor Department at Costco in San Luis
Obispo to see if there were any improvements to be made. Throughout a span of 6 weeks, we
visited Costco multiple times to observe the processes done within the Liquor Department.
Focusing specifically on the work involved with restocking, we noticed there were three main
areas of focus: optimizing floor layout, optimizing the steps within pallet plugging, and optimizing
the organization of the wine section.
We incorporated work measurement techniques, specifically Direct Time Study, in order
to collect the data we needed to determine normal time and establish standard times for the
operations. The data also helped us in identifying and finding areas for improvement.
After a rigorous analysis of our collected data, it was obvious that there was room for
improvement within the organization of stored wine boxes. Through direct observation, we
noticed that an implemented color-coding system would make it much easier for the operators
to identify the specific wine bottles they intend to restock. The system would involve the morning
shift operators to place colored stickers on boxes that correspond to areas in the wine section.
This task will add a few seconds to the work of the morning shift operator, but will save an
exponential amount of time for the day shift workers as they look for their wine bottles.
For the task of pallet plugging, not many changes could be implemented. Under
evaluation, the current system was running very efficiently and the only apparent improvementwas preventing possible defects (specifically broken bottles and wines spills). To tackle this
issue, we proposed moving the step of removing plastic wrapping on pallet to just before the
operator places the pallet into sales position. The plastic wrapping then acts as a protective
coating as the pallet is moving from one place to another on the pallet jack.
Implementing an alternative floor layout could potentially cut down movement time for
each of the operations. With the limited space the operator has to work with, changing the
orientation of floor pallets would determine which floor layout works best.
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
3/24
2
SELECT
Costco is a membership warehouse club that offers a wide selection of merchandise
with multiple locations worldwide. The store located in San Luis Obispo is a part of this chain
and is one of the most successful retailers in the area. Costco generally has a huge customer
base and each separate store yields successful earnings. Like the other stores, the one located
in San Luis Obispo is driven by local residents, but gets an extra boost of success through thesales made with college students living in the area.
Costco makes a huge amount of sales every single year with its huge selection of
merchandise. According to Eric, Merchandise Manager, Costco has about $13-$15 million worth
of product on hand at all times. They are expected to sell $204 million this year, with 6% of total
sales coming from liquor. This equates to about $12.4 million and contributes to its yearly
average of $50 million more than the Costco located in Santa Maria. Although it may seem like
the liquor department doesnt make much money (only 6%), its one of Costcos highest
priorities and easily undergoes the most amount of surveillance. With this in mind, we decided
to observe tasks of the operators who work in this specific area.
We noticed that the liquor department is one of the most inefficient areas throughout the
whole store. Approximately 80% of the store uses a pallet plug system in which old, empty
pallets are simply removed with a forklift. After the old pallets are removed, forklift operators
plug in new pallets that dont need to be touched up on and are ready to be sold. This also
removes the need to hand-stock anything and is much more efficient than the restocking
methods practiced within grocery stores. Technically, half of Costcos liquor department (beer
and hard liquor) also practices a pallet plug system. Despite these efforts, through direct
observation and analysis, our group saw some areas of improvement which we will discussthroughout the body of this report. On the contrary, the other half of the liquor department (wine)
was all hand-stocked. It was obvious that we needed to focus on the optimization of these two
processes.
The whole early-morning restocking process in the liquor department (on a shift from
4am-12pm) is operated by one single person. With this in mind, the operator has a huge amount
of tasks to accomplish in such a short amount of time, considering that he needs to be done
with raw stocking by 9:45 am. In this report, we break down the different tasks the operator
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
4/24
3
needs to accomplish. Note that the total time allowed to complete entire restocking process is: 5
hrs, 30 mins.
The operator has three main functions throughout the day in terms of restocking: pallet
plugging, wine crate hand stocking, and maintaining wine crate volume throughout the day.
The summarized and simplified tasks of pallet plugging consists of the operator: 1)
finding and identifying the old pallet that needs to be restocked, 2) searching for the new palletthat will replace the old one, 3) using a pallet jack to transport the old pallet to a temporary
location, and 4) using the pallet jack to transport the new pallet to the old pallets previous sales
location. For this process, we will focus on alternative floor layouts to reduce the amount of
distance the operator needs to travel in order to save time. We will also focus on the order in
which the operator does things within this process to help prevent defects (broken bottles).
The tasks of wine crate hand stocking and day maintenance are very similar. They both
involve the operator: 1) finding and identifying the wine crate that needs to be restocked, 2)
finding the new box of corresponding wine, 3) filling the empty crate with new wine bottles, and
4) storing the remaining wine bottles in reserved steel space. However, the required
maintenance throughout the day typically takes longer than the morning restock. The day shift
operator took an average of 40 seconds to find the stored wine box. The morning shift
operators primary objective was to stocking as much product as possible in either the wine
crates or steel space; searching for a wine box wasnt necessary.
RECORD
Pallet Plug:
Our approach to record the pallet plug was to incorporate a direct time study. We broke
up the elements involved in the pallet plug operation into a single cycle. The cycle would start
from unwrapping of the plastic to moving and setting down the pallet. We timed a total of 20
cycles in order to attain average observed time, average normal time, and standard time. Below
is the data of average normal times of each element. Data obtained from Appendix 2.
Unwrap plastic Insert pallet jack Pump up pallet Move pallet Set down pallet
16.865 1.75 6.465 33.875 2.015
Table 1
Average normal times for pallet plug
The average calculated for each work element had a consistent recorded time, however,
there was one work element from this operation that greatly varied from cycle to cycle. The
moving of a pallet from the current location to the designated area had a range of 15.8 secondsto 45.3 seconds. The lower times were due to our operator, at certain cycles, only having to
move a couple of feet in order to place the pallet to the designated area.
Wine Section:
We conducted a direct time study for the wine section as well. Just like the pallet plug
time study, we determined the elements involved for the handstocking of wine operation into a
single cycle and timed a total of 20 cycles. We were able to obtain the data and create a direct
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
5/24
4
time study, see Appendix 2.3. The work elements comprised of cutting the box of wine,
removing cardboard slits, picking up box, moving to designated crate, setting down, and finally
hand stocking the crates until full. The normal times for the handstocking of wine crates element
fluctuated from cycle to cycle. This was due to some crates already halfway full. We observed a
time of >50 seconds for hand stocking a completely empty wine crate.
Alternative Layouts:
Our approach to creating alternative layouts of the liquor department was to work with
the dimensions measured and create proposed examples on Microsoft Visio. See Appendix 3
for proposed alternative layouts.
EXAMINE
Allowances:
We determined the allowances prior to conducting our time studies. After observing the
operation, we gave an allowance factor to our operator. The allowances include the following:
Personal allowance, basic fatigue, bending to reach pallet items, lifting/pushing the hand forklift,
and medium monotony. This adds up to a 13% total allowance for the operator.
Pallet Plug:
Costcos current method of pallet plugging is already based upon lean strategies, and
their competitors have a hard time keeping up with their efficiency. Instead of following a
traditional method, removing product from a back room or warehouse and hand stocking
everything in the store; Costco removes many of the operations in the middle, greatly reducing
the amount of time and effort needed to get finished goods into the hands of the customers.
Product is removed from delivery trucks very early in the morning already on pallets, then forklift
drivers can pallet plug them directly where they will be sold from. Minimal work is needed to
arrange the product on each pallet for display, if any at all. Costco negotiates with its vendors totry and receive their product already neatly and densely packed on a pallet, in an effort to
reduce work that needs to be done on their end. The system is lean and difficult to reduce much
waste in without incredible effort. Therefore, we looked to reduce waste in more hard to
recognize areas, such as preventing defects and improving safety.
Wine Section:
Costco of San Luis Obispos wine section is one of the few areas in the whole store that
does not fully implement the efficient pallet plug system. There are two large rows of wine crates
in the section that must be individually hand stocked bottle by bottle.
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
6/24
5
The manager of the facility told us that this specific section had a priority on display and
making the wine seem much more appealing to the customer. Underneath the rows of crates is
a small amount of storage space just tall enough for bottles to stand upright in. This space is
used by employees during the day to restock any wine crates that are becoming empty or no
longer have the organizational appearance that Costco desires. Our focus for improvement in
the wine section should be employee changeover and organization between employees. The
reserve underneath the crates is stocked by workers during the early morning shift but product
is usually only removed from it during evening and later store hours.
Floor Layout:
The liquor section in Costco is made up of three types of storage space: steel space,
floor pallets, and wine crates section making it one of the most diverse in the store. Steel space
is all of the area above ground, in large metal scaffolds with semi-permanent locations. Floor
pallets are every space where a product will be sold directly off of a pallet, these can be moved
around and placed freely. Wine crates may be moved around like pallets, but must not be
broken up out of the two large rows for display purposes.
5S Current Observations:
We found that Costcos liquor department incorporates 5S practices. A workplace as big
as Costco relies on 5S principles in order to be productive and keep the departments in order.
We observed the liquor departments current 5S implementation.
Sort: The operators in the liquor department currently use Sorting by
utilizing shopping carts and platform carts to place trash, plastic and
unneeded materials in. Minimal walking and easy access for the
operator.
Straightening:For Straightening, Costco currently has pallets that
are emptied and moved out of the way to prevent any interference with the work flow of the
liquor department. However, these areas are random and could block the pathway of other
operations. There is always room for improvement in 5S.
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
7/24
6
Systematic Cleaning:The third S is
implemented usefully. Currently, there is a sign
placed on the end of the aisle with instructions on
how to properly clean a spill. In addition, basic
equipment such as gloves, paper towels, plastic
wraps is provided for the operators. We alsonoticed that the floors are mopped and polished
regularly, and workers make an effort to remove
trash from random areas.
Standardize:In regards to Standardize, the operators are
responsible to check to see that pallets are unbroken and clean.
They are required to have the products appear straight and uniform.
Sustain: Finally, the last 5S is currently set up so that employees
are trained to understand the importance of adhering to rules and schedules. There is also a
strict schedule on when everyone should come into work because the entire process runs on a
chain of events. Costco requires operations to be done by 9:45 AM.
Costcos current 5S implementation works well because it keeps the workplace
organized and helps with the work flow operation. However, in lean, there are always room for
improvement and newer ideas that can improve the conditions of the work environment and the
process (See 5S Proposed Implementation).
DEVELOP
Pallet Plug:Optimizing the pallet plug system appeared rather difficult, and can seem somewhat
impossible with the overall simplicity of the task - taking something out, and replacing it with
something new. However, breaking the task into elements could reveal any flaws or
opportunities for improvement. In order to further analyze and understand this process, we
broke down the task into small individual steps and organized it with a flow process chart (see
Appendix 1.1 for Flow Process Chart).
After weeks of observation and analysis, we determined that their current system of
pallet plugging was already efficient. There was much that could be done without changing the
whole system in which Costco orders their products from suppliers, which obviously wasnt an
option. One thing we did notice though was the order in which the operator removed/cut the
plastic from the new pallet before putting it on a pallet jack. During one of our visits, Nick was
doing his regular task of transporting the new pallet with a pallet jack to the old pallets sales
location when one of the boxes fell off the top layer. The box hit the floor and shattered multiple
bottles, causing a huge spill and a loss in sellable wine bottles (see Appendix 4.1 for picture).
When this occurred, the whole operation stopped as he had to move all the surrounding pallets
and equipment out of the way so they wouldnt get affected by the spill. He swept up and threw
away the broken pieces of glass. After doing this he left for a few minutes and came back with a
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
8/24
7
vacuum machine used to clean up and wash the spill. Once he was done cleaning the spill, he
left once again to put the machine away and came back with a mop and bucket to take care of
the spots the machine might have missed. After this whole cleaning process, Nick could finally
continue on with his regular restocking process. The cleaning process took a total of 20 minutes
and 12 seconds.
There were two main causes of this spill: pallet ground placement, and the plasticwrapping on the pallet. The pallet ground placement caused the spill because the pallets were
unorganized and set down in a way that was hard to maneuver around. This problem could be
prevented by simple organizational efforts and is based solely on the operators experience.
There is no systematic way to place the pallets as each movement is situational and changes
on a day-to-day basis depending on what kind of items come in every morning. However, the
plastic wrapping on the pallet was something that could be greatly improved in a relatively
simple manner.
In the current system, the operator would cut the plastic wrapping from the new pallet
before putting it on the pallet jack (refer to Appendix for Flow Process Chart - Present).
Removing the plastic before transporting the pallet on the pallet jack greatly increases its
chances of falling off and thus causing defects and mishaps. In our developed system, we
propose that the operator wait till transporting the pallet to the desired sales location before
removing the plastic. We also propose that the operator remove the plastic while it is still
hooked onto the pallet jack to prevent any additional steps (refer to Appendix for Flow Process
Chart). Even though our proposed solution doesnt cut down the amount of time or distance
travelled, it greatly reduces the chances of a box falling off the top layer while in transportation,
and thus defects and broken bottles.
Wine Section:
Originally, we focused on the actual bottle-by-bottle stocking of the wine section. The
morning employee unwraps pallets, and unpacks individual bottles and boxes. Soon, werealized that this was a more relaxed task. As in, what the worker is doing is very subjective on
what needs to be done. After talking with some employees about proposed changes to this
morning wine stocking, such as a more structured approach, we soon came to the conclusion
that any improvement in efficiency here would be cancelled out by the work needed to
implement it.
Our new focus for this section became employee changeover and organization to make
the task of restocking wine during the day more efficient for those employees. Boxes of wine are
often just placed where there is any space at all under the crates. Time is money, so we wanted
to save those employees day restocking wine as much time as possible by making it more easy
to find the product they are looking for. The solution we came up with we call a quadrant color
system, which will break the two wine rows up into four space-even sections each represented
by a color. The way it works is that the morning employees who fill the crates once and make
sure the reserve space is full, have colored stickers that correspond to each of the quadrants.
As he or she puts a box in this space, all that must be done is place a sticker facing outwards to
be seen by later employees. This way, even if a morning worker must place a box far away from
where the corresponding crate is (because of the space restraints), their evening counterparts
will be able to see which quadrant each box belongs to.
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
9/24
8
Floor Layout:
We spoke to Nick, the primary liquor department operator, and he told us how it was
often difficult to stock or maneuver pallets because of the way product is laid out on the floor.
We set out to improve both:
The amount of movement on average needed to stock or restock an item Maximizing space in between products on the floor to make moving pallets easier (and
reduce risk of breaking the product)
Our initial approach was to consider alternative layouts in order to make more floorspace for our operators movement. However, the limited amount of current space in the liquor
department would not increase by simply making alternative layouts. Since it is not feasible to
simply add floor space, we decided to generate alternative layouts in order to cut down on the
operators movement time. Two proposed valid layout designs were created to aid in the time
needed to stock and restock product, while the third design was an experiment to entirely
maximize product on the floor. See Appendix 3.
5S Proposed Implementation:
The 5S principles were an important tool that we used while observing the Liquor
department. We came up with a few recommendations and proposed ideas to maintain
improved 5S conditions in the department.
Sort: Our proposal to the 1st S, Sort, was to limit the variation of wine bottles within stored
pallets. The idea of sort is to keep only the materials necessary to complete a job within the
workspace. Mixing different bottles within the same pallet creates clutter, and makes it harder
for the operator to identify and select the bottles he needs to complete his/her work. Increasing
the amount of clutter will increase the amount of shuffling in between boxes. When the operator
is shuffling boxes around, there is a greater chance of broken bottles (defects).
Straightening: We had a couple proposals to improving the current methods of Straightening.
When restocking, empty pallets placed on the floor is inevitable; there is always going to anempty pallet somewhere as product is constantly being removed from them.
Our first proposal is to be conscientious of other the operations occurring in neighboring
departments. For example, Costcos liquor department is neighbored by the bread/pastry
department and the food department. Empty pallets were moved from their respective work
areas as an attempt to sort, but were sometimes placed in areas that interfered with the work
flow within different departments. We propose that a designated area for empty pallets should
be established; each department should have an area where operators can place empty pallets.
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
10/24
9
This will eliminate the random placement of empty pallets, and make it easier for operators to
walk around and maneuver within their respective departments. This whole idea also builds a
sense of cooperation as each department works and helps one another.
Systematic Cleaning: Although Costco practices good systematic cleaning, there is still room
for improvement. They currently have a sign providing instructions on how to safely and properlyclean a minor spill, but do not provide instructions on how to operate the EC H20 machine (used
to clean larger spills). The operators should know how to use the machine themselves, instead
of calling for help. Not being able to solve the issue directly wastes time as the operator would
need to wait for backup to arrive.
Standardize: During store hours, empty boxes should immediately be removed to maintain
uniformity. When possible, boxes with an uneven amount of product should be combined so that
less total boxes are used.
Sustain: To sustain 5S, new workers should be trained the optimal organizational techniques
mentioned above. They should also be familiarized with the benefits of 5S and how it leads to a
more enjoyable working environment. Management should continue offering incentives for
exceptional worker performance and maintenance should always be a main priority!
The implementation of these 5S principles will improve the work environment conditions
by making it safer and comfortable for the operators. Overall, we found 5S to be an exceptional
tool used to maintain order and reduce waste.
EVALUATE
Pallet Plug:
The proposed pallet plug developments arent monumental changes; one involvesgradual learning experience and the other involves no new tasks. Even though they are simple,
they will still have a great effect on the amount of lost time. Also since we are not implementing
any new tasks, operators wont have to learn new skills; the implementation will be easily
adaptable.
If the operator waits to remove the plastic wrapping until just before placing the pallet in
its final sales position, the plastic acts as a protective coat. The plastic will prevent boxes from
falling off the top layer and prevent spills and accidents. According to Nick, spills happen at least
3 times a week. Assuming that each spill takes at least 15 minutes (our observed time was 1040
seconds), at a minimum, it would cause 45 minutes in wasted time a week. This is time that
could be put into actual value added activities.
We have provided the following table displaying the events that occurred during the wine
bottle spill, and the amount of time it took to complete the entire cleaning process.
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
11/24
10
Broken Bottle Cleaning Process
Action Time (AM) Cumulative Time(sec)
2 bottles break 6:12
Nick leaves 6:12:30 30
Comes back with ECH20 Machine
6:16 240
Pieces picked up 6:18:09 369
Finish movingsurrounding pallets
6:22:02 602
Finish using Machine 6:26:05 845
Grab mop and bucket 6:26:10 850
Finish mopping 6:29:05 1025
Resume work 6:29:20 1040
Table 2
As we can see from the table above, the whole cleaning process took about 1040
seconds; 1040 seconds from the morning shift were lost. This is a huge chunk of time that could
be allocated to value added activities.
Wine Section:
The color quadrant system is the simplest method we found to increase synergy
between the workers stocking the wine section in the morning and those workers who restock
the wine crates during open business hours. It will allow the later working employees to quickly
and easily tell which area specific boxes in the underneath storage area correlate to on the
crates above. An advantage to the system is that it can work both ways. An employee can find
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
12/24
11
which quadrant a box of wine goes to, or he or she can quickly look for a corresponding box if
the wine needed for the crate is unknown. Boxes that are stored out of their respective quadrant
will stand out a different color, alerting workers that those bottles are stocked in a different area.
This reduces the delay that an employee might experience when searching for a wine that may
have run out or just needs to be topped-off during business hours.
Our proposed method mainly changes the steps of the morning shift operator. Thisalteration, however, then changes the time taken to complete the steps of the day shift operator.
Our DTS allowed us to find the current time taken to hand-stock the wine crates for both day
and morning shift operators (Refer to Appendix 2.3). We then used multiple flow process charts
to help us quantify our savings (Refer to Appendix 2.1, 2.2).
After conducting our studies, we determined that the current standard time for wine crate
hand stocking (morning shift) operation was 106.1 seconds. This translates to an average 106.1
seconds to hand stock each crate. Our proposed standard time is 111.6 seconds, as we added
an extra step of placing a sticker onto the stored wine boxes. Why would we add 5.5 seconds to
our operation?
The 5.5 seconds added to our morning shift operation will ultimately save a large amount
of time for day shift workers looking for the wine bottles. Stored boxes will be easier to access
as wasted movement will be cut down. We have also introduced an organized system for wine
storage throughout the day as compared to boxes being placed in random spots. The current
standard time for the day shift workers hand-stocking wine cases is 100.3 seconds. The
implementation of the color-coding system to the morning operation in the wine section reduces
the standard time of the day shift to 78.5 seconds, a 21.8 second improvement. A 21.8 second
reduction in the operation throughout the day outweighs the mere 5.5 seconds added to the
morning operation. The total net improvement is 16.3 seconds.
Dividing the wine crates into four color quadrants
Floor Layout:
For alternative floor layouts, there are three proposed designs. For the first layout, we
shifted the two wine crate rows to be parallel with the pallet row so that the floor layout would be
consistent. This would improve the operators movement by allowing the operator to move from
aisle to aisle easily in a uniform manner. The problem with this layout is that it goes against
Costcos policy. The wine crate rows are the way they are for aesthetics purposes.
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
13/24
12
Proposed Layout #1 - Appendix 3.2
The second alternative floor layout is designed with two horizontal floor pallets (parallel
to the wine crate aisles) rather than three vertical floor pallets. This would essentially allow the
operator to move the pallets about the floor more freely. The current layout has three verticalfloor pallets with two aisles in between for movement. The proposed layout has two horizontal
floor pallets with one aisle in between for movement. The proposed, with one less aisle, will
make it easier and quicker for the operator to move from one pallet to the other.
Proposed Layout #2 - Appendix 3.4
The third and final experimental floor layout is one where we only took into account
maximizing products on the floor. We were able to squeeze in a few more pallets but at the cost
of nearly everything else. Stocking this area would become near impossible; let alone the maze
of pallets would trap and probably strand people and shopping carts inside, forcing them to
climb or claw their way out over the other trapped shoppers. We included this layout to showhow well that the flo or space is already being utilized, and that number of pallets on the floor
is not currently an area for much improvement.
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
14/24
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
15/24
14
Floor Layout:
Changing the layout of the wine crates and floor pallets is a one day job. The
experienced forklift drivers at Costco would make quick work of any changes needing to be
made to floor pallets. The wine crates would most likely need to be completed.
MAINTAINPallet Plug:
To maintain the change in where the plastic is removed from the pallet, any employee
training manuals may have to be changed, along with informing those who train new employees
of the new protocol. This will ensure that future workers of the company will be educated on the
safest way to move pallets in an attempt to prevent any product from falling off and breaking in
the aisles.
Wine Section:
The biggest key to successfully maintaining the color quadrant system is in the hands of
the employee who stocks in the morning. It is his or her duty to make sure each box that gets
placed in the wine reserve space not only has a sticker on it, but that it clearly faces outward
and can be seen from a distance. Otherwise, if this person fails to do this for any box, the whole
system loses effectiveness.
Floor Layout:
The best way to maintain the floor layout is to build the any separate systems around it.
The floor layout should also stay consistent so both employees and customers have a general
understanding of where everything is located.
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
16/24
15
Appendix 1.1Flow Process Chart Present Method Pallet Plug
Flow Process Chart Proposed Method Pallet Plug
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
17/24
16
Appendix 1.2Direct Time Study Pallet Plug
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
18/24
17
Appendix 2.1Flow Process Chart Present Method Hand-stocking of Wine Cases
Flow Process Chart Proposed Method Hand-stocking of Wine Cases
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
19/24
18
Appendix 2.2Flow Process Chart Present Method Hand-stocking of Wine Cases (Throughout Day)
Flow Process Chart Proposed Method Hand-stocking of Wine Cases (Throughout Day)
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
20/24
19
Appendix 2.3Direct Time Study Hand-stocking of Wine Cases
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
21/24
20
Appendix 3.1Current Layout
Appendix 3.2Proposed Layout
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
22/24
21
Appendix 3.3Maximizing-Pallets Layout (Experimental)
Appendix 3.4Proposed (Favored Design) Layout
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
23/24
22
Appendix 4.1Broken Wine Bottles
-
8/13/2019 Costco Warehouse Process Improvement Project - Final Report, The Profit Prophets IME223
24/24
Appendix 5.1Spaghetti Diagram for Pallet Plug
Spaghetti Diagram for Wine Hand-stock