cordless blind rivet setting tools - colly · pdf filecordless blind rivet setting tools ......
TRANSCRIPT
8888
111 114 117
100 102 104 106
9820
9020
96 97
92 93 94
The experts in riveting technologies
Cordless blind rivet setting tools
Blind rivet hand tools
Battery powered blind rivet setting tools
AccuBird® PowerBird® Solar
HN2 SN2
PowerBird®
NTS
PowerBird® ProAccuBird® Pro PowerBird® Pro Gold Edition
Pro series with spring- loaded trigger system
NTX & NTX-F Flipper®
89
X X X
2Co
rdle
ss b
lind
rive
t se
ttin
g to
ols
The experts in riveting technologies
What rivets what?
tools EnergyPolyGrip® G-Bulb meGa GriP®* BULB-tite®* tri-foLd®
3.2 4.0 4.8 6.4 4.8 6.4 4.1 4.8
ntS H A A A
ntX / ntX f H A A A
flipper® H
Hn2 H SE with X
Sn2 H
Hn2 Bt H
accuBird® B X at 6,3 A S
PowerBird® B AS 6,4 X at 7,7
PowerBird® Solar B AS 6,4 X at 7,7
accuBird® Pro B X at 6,3 A S
PowerBird® Pro B 6,4 X at 7,7
PowerBird® Pro Gold edition B 6,4 X at 7,7
PowerBird® Pro Gold edition with spring-loaded trigger system
B 6,4 X at 7,7
tools EnergyBlind rivet Ø mm
2.4 3.0 3.2 4.0 4.8 5.0 6.0 6.4 8.0
ntS H A A
ntX / ntX f H A A
flipper® H A A
Hn2 H
Sn2 H
accuBird® B A
PowerBird® B Y Y
PowerBird® Solar B Y Y
accuBird® Pro B A
PowerBird® Pro B Y Y A
PowerBird® Pro Gold edition B Y Y A
PowerBird® Pro Goldedition with spring-loaded trigger system
B Y Y A
H: HandtoolB: Battery-powered tool
X: Special accessories requiredY: Accessories included in the scope of delivery effectively expand the working range.*: A special nosepiece is always required when setting MEGA GRIP®
blind rivets and BULB-TITE® blind rivets
A: AluS: SteelE: Stainless Steel / MonelBlue box: All materials (ASE) can be riveted. Where there are exceptions, the letters of the rivetable materials are provi-ded directly in the box.
9090
The experts in riveting technologies
Blind rivet hand tools
GeSiPa® manual blind rivet setting tools – easy to operate, tried and tested, always good but now even better!
GeSiPa® has not only redesigned the classic ntX tools themselves but also optimised the surfaces and handles.
By utilising a soft rubber material, the new ergonomically designed handles make it ea-sier to work while substantially relieving the strain on the hands.
91
2Co
rdle
ss b
lind
rive
t se
ttin
g to
ols
The experts in riveting technologies
NTX & NTX-F
Tried and tested technology and quality in a new design
Handles• Ergonomically formed handles for working
efficiently without fatigue• Improved haptics by use of softer material• Non-slip even in oily environments• Environmentally compatible thanks to PVC-free
handles• Visually upgraded by GESIPA® logo and contrast
stripes • Optimised locking clip
Housing• Improved performance thanks to newly designed
housing• Powder-coated abrasion-resistant housing surface
in GESIPA® colour• GESIPA NTX visually upgraded with Made in
Germany lettering
ergonomics Ergonomically formed handles for working efficiently without fatigue
Surface Powder-coated abrasion-resistant housing surface in GESIPA® colour
Housing Improved performance thanks to newly designed housing
Locking clip Optimised locking clip (NTX-F)
advantages• Simple one-hand operation• Effortless lever system• Specially hardened GESIPA® jaw system• Rugged design and durable• Equipped with the most commonly used GESIPA®
nosepieces secured directly on the tool • Nosepieces quick and easy to change• Worldwide service and spare parts available for
decades to come• Made in Germany
9292 The experts in riveting technologies
Jaws (2-parts) For NTS, NTX, NTX-F and Flipper®
Working rangeBlind rivets up to 5 mm Ø aluminium and 4 mm Ø steel and stainless steel
technical dataWeight: 480 gTotal length: 275 mmStroke: 8 mm
accessories Nosepieces: 10/18, 10/24, 10/27 and 10/32 1 maintenance wrench, operating instructions with spare parts list
advantages• Body casing in high-quality die cast aluminium• Body head made of forged steel• Narrow head for difficult to access rivet locations• Opening spring for automatic ejection of the mandrel• Ergonomic handles
Blind rivet hand tools
Part no. 143 4028
NTS (with self opening spring)
nosepiece assignment for ntS, ntX and ntX-f can be found on page 97.
Dimensions in mm
Part no. 143 4071
93
2Co
rdle
ss b
lind
rive
t se
ttin
g to
ols
The experts in riveting technologies
Blind rivet hand tools
NTX & NTX-F
accessories ntXNosepieces:10/18, 10/24 and 10/321 maintenance wrench, operating instructions with spare parts list
accessories ntX-fNosepieces:10/24, 10/27 and 10/321 maintenance wrench, operating instructions with spare parts list
additional advantage ntX-f• Opening spring for automatic ejection of the mandrel
Dimensions in mm
nosepiece assignment for ntS, ntX and ntX-f can be found on page 97.
Part no. 143 4071
Part no. 143 4042Part no. 143 4040
Working rangeBlind rivets up to 5 mm Ø aluminium and 4 mm Ø steel and stainless steel
technical dataWeight: 575 gTotal length: 260 mmStroke: 8 mm
advantages• Body casing in high-quality die cast aluminium• Body head made of chrome-vanadium steel,
forged• Steel inserts on all bearing points subject to
wear• Intermediate lever system reduces the force
required and dampens the tear-off effect• Narrow pliers head for difficult to access rivet
locations• Ergonomic slip handles• Simple maintenance – fast jaw change
NTX-F NTX (with self opening spring)
9494 The experts in riveting technologies
Conversion kit for plastic blind rivets:
Flipper®
Working rangeBlind rivets up to 5 mm Ø aluminium and 4 mm Ø steel and stainless steel
technical data Weight: 750 gTotal length: 221 mmTotal stroke: 16.2 mmSingle action stroke: 1.8 mm
nosepieces/accessoriesNosepieces:10/18, 10/24 and 10/291 maintenance wrench (on magazine)Operating instructions with spare parts list
advantages• The force increases when the handle is closed. This is
made use of via the special arrangement of the lever when setting blind rivets: ergonomic design
• The required manual force is reduced by aroand 40 percent if actuated several times.
• Actuation lever with an opening spring for easy single-handed operation
• Jaw mechanism with spring reset for safe and automatic mandrel ejection
• Rivet mandrel collection container can be clipped to the body casing and is easy to empty
• Larger device lift: a benefit when handling extra long blind rivets
• Sturdy body casing in high-quality die cast aluminium• Sturdy actuation lever made of tempered steel• Link pin on anti-twist bearings• Ergonomic lever positions and handle design
nosepiece assignment for flipper® can be found on page 97.
the blind rivet hand tool for easy handling with only one hand.
i
Dimensions in mm
Part no. 143 3950
Part no. 143 3984
95
!2
Cord
less
blin
d ri
vet
sett
ing
tool
s
The experts in riveting technologies
Blind rivet hand tools – sortiment
Flipper® boxContentsBlind rivet hand tool flipper® and 3 PolyGrip® blind rivet sizes, in a lightweight plastic carrying case.Weight: approx. 0.9 kgDimensions: 220 x 200 x 40 mm
mini pack refills can be found on page 282.
incl. 3 blind rivet sizesPolyGrip® Alu/steel 3.2 x 8.0 mm PolyGrip® Alu/steel 4.0 x 10.0 mmPolyGrip® Alu/steel 4.8 x 10.0 mm
Riveting kit
ContentsBlind rivet hand tool ntX and 5 blind rivet sizes, 1 maintenance wrench.Weight: approx. 2.5 kgDimensions: 275 x 145 x 40 mm
ContentsBlind rivet hand tool ntX and 12 blind rivet sizes, 1 maintenance wrench.Weight: approx. 3.75 kgDimensions: 340 x 205 x 40 mm
Junior riveting kit
Junior riveting kit
Junior riveting kit PolyGrip®
incl. 5 blind rivet sizesAlu/steel 3.0 x 6.0 mmAlu/steel 3.0 x 8.0 mmAlu/steel 4.0 x 6.0 mmAlu/steel 4.0 x10.0 mmSteel/steel 3.0 x 6.0 mm
incl.12 blind rivet sizesAlu/steel 3.0 x 8.0 mmAlu/steel 3.0 x10.0 mmAlu/steel 3.0 x12.0 mmAlu/steel 4.0 x 5.0 mmAlu/steel 4.0 x 6.0 mmAlu/steel 4.0 x 8.0 mmAlu/steel 4.0 x10.0 mmAlu/steel 4.0 x12.0 mmCopper/steel 3.0 x 6.0 mm Copper/steel 4.0 x 6.0 mmAlu/steel 3.0 x 5.0 mmAlu/steel 3.0 x 7.0 mm
Now also available as Junior riveting kit PolyGrip® (Part no. 145 7662) with the sizes 3.2 x 8, 4 x10, 4 x17, 4.8 x 10 and 4.8 x 17.
Part no. 143 3950
Part no. 143 3984
Part no. 143 5457
Part no. 143 5459
Part no. 145 7662
Part no. 143 3951
9696 The experts in riveting technologies
Working rangeBlind rivets up to 7.7 mm Ø all materials
technical data Weight: 1.85 kgTotal length: 570 mmStroke: 10 mm
accessoriesNosepieces:16/26 BT, 16/32 BT, 16/42 BT and 16/48 BTSpent mandrel containerMaintenance instructions with spare parts list
Jaws (3 parts): Hn 2 Bt
Working rangeBlind rivets from 3.0 to 6.4 mm Ø all materials, except PolyGrip® blind rivets with 6.4 mm Ø made of stainless steel and G-Bulb blind rivets
technical dataWeight: 1.85 kgTotal length: 570 mmStroke: 10 mm
accessoriesNosepieces:16/29, 16/32, 16/36, 16/40 and 16/45Spent mandrel containerMaintenance instructions with spare parts list
Jaws (3 parts)
Lever riveting tools
(only for BULB-tite® see page 72)
HN 2 HN 2-BT
advantages• Pliers casing in high-quality die cast aluminium, its
sturdy design protects it against soiling• Link pin on anti-twist bearings and with inner axial
protection, wear-proof and smooth running• Tooth segment transmission with favourable lever
arm arrangement reduces the force required and dampens the tear-off effect
• Fixed casing lever and ergonomic handle design: simple and easy handling
• Actuation lever: repeated re-engagement very easy, even on workpiece; highly beneficial for oversized blind rivets
• Gear rack: supported on a brass plate; smooth running
• Rivet mandrel collection tank: swivel-mounted to the casing; can be emptied easily and safely
nosepieces and performance see page 97.
Dimensions in mm
Part no. 143 4107 Part no. 145 6714
Part no. 143 4103Part no. 143 4173
97
2Co
rdle
ss b
lind
rive
t se
ttin
g to
ols
The experts in riveting technologies
Lazy tong riveting tool
SN 2Working rangeBlind rivets from 3.0 up to 6.4 mm Ø all materialsG-Bulb blind rivets up to 4.8 mm Ø.
technical dataWeight: 1.93 kgLength when closed: 310 mmLength when opened: 810 mmStroke: 10.5 mm
accessories Nosepieces for Ø 3.2 mm, 4.0 mm, 4.8 mm, 6.0 mm and 6.4 mm, 1 maintenance wrench,Operating instructions with spare parts list
advantages• Pliers casing and handle in high-quality die
cast aluminium• Shear system in high strength steel, galvanised• Moulded handle — double bearing• Narrow casing for difficult to access rivets• Enclosed pliers casing prevents soiling• Favourable lever arm arrangement with 4-joint
slide block bearing — reduced effort
rivet Ø rivet material ntS, ntX, ntX-f,
flipper®
Sn2 Hn2 Hn2-Bt
2,4 Alu 10/18 — — —
3.2 CAP®-Alu, CAP®-Cu 10/18 — — —
3 and 3.2 Alu, Cu, Steel, Stainless steel, Stinox, Alu, PG-Alu,
PG-Steel
10/24 17/24 16/24 —
4 Alu, Cu 10/24 17/24 16/24 —
4 Steel, CAP®-Alu, CAP®-Cu, Alu, PG-Alu
10/27 17/27 16/27 —
4 Stainless steel, Stinox, PG-Steel
10/29 17/29 16/29 —
4.8 CAP®-Alu, CAP®-Cu 10/29 17/29 16/29 —
5 and 4.8 Alu, PG-Alu 10/32 17/29 16/29 —
5 and 4.8 Steel, Alu — 17/32 16/32 —
5 and 4.8 Stainless steel, Stinox, PG-Steel
— 17/36 16/36 —
6 Alu — 17/36 16/36 —
6 Steel — 17/40 16/40 —
6.4 Alu, PG-Alu — 17/40 16/40 —
6.4 Steel, Alu — 17/45 16/45 —
4 all BULB-tite® — — — 16/26 BT
5.2 all BULB-tite® — — — 16/32 BT
6.3 all BULB-tite® — — — 16/42 BT
7.7 all BULB-tite® — — — 16/48 BT
article Part no.
10/18 143 4055
10/24 143 4061
10/27 143 4062
10/29 143 4064
10/32 143 4065
16/18 143 4285
16/24 143 4288
16/27 143 4289
16/29 143 4290
16/32 143 4291
16/36 143 4292
16/40 143 4293
16/45 143 4300
16/26 BT 143 4301
16/32 BT 143 4302
16/42 BT 143 4303
16/48 BT 143 4304
nosepiece assignment for manual, lazy tongue and lever rivet devices
Nosepiece assignment data apply to DIN and GESIPA® blind rivets.
article numbers for nosepieces
Jaws (3 parts)
Dimensions in mm
Part no. 145 6714
Part no. 145 6674
Part no. 143 4958
9898
MADE IN GermanY
Video
The experts in riveting technologies
the Bird generation with brushless motor – reliability for a high run and fast work sequence
the Bird Pro seriesGESIPA®, which invented battery-powered blind riveting technology, has been producing the Bird series for over twenty years now. To this day, it sets the standard for the battery-powered blind riveting devices market. Not least due to changing customer requirements, the Bird family‘s modular system is updated on a regular basis. GESIPA® has therefore built a new platform that will supplement the current Bird series to meet the highest customer require-ments. The new tools in this series are the PowerBird® Pro Gold Edition, PowerBird® Pro, AccuBird® Pro, FireBird® Pro and the FireBird® Pro Gold Edition.
Well-proven and ergonomically designedThe Bird Pro series is equipped with the low-wear jaws system and features the same ergonomic design as the TAURUS® series, already proven a thousand times over.
BLdC technologyA BLDC motor is a brushless DC motor that, instead of brushes that are susceptible to wear, uses electrical sen-sors to detect the rotor‘s position and commutate the stator coil via circuit breakers. A special software in the electro-nics controls the motor.
The advantages of a BLDC motor include high efficiecy, long service life, particularly smooth running with a precision ball bearing and a reduction in electrical noise radiation.
PackagingAll tools in the Bird Pro Series come in a practical plastic case.
The Bird Pro series
99
2 3 42
Cord
less
blin
d ri
vet
sett
ing
tool
s
The experts in riveting technologies
Li-ion batteries The GESIPA® Bird Pro series is equipped as standard with a new rechargeable 2.1 Ah li-ion slide-on battery. These rechargeable li-ion batteries feature the new Deep Sleep function. To keep intrinsic con-sumption as low as possible, after a set idle time, the battery auto-matically assumes "Deep Sleep" mode. The battery can then be woken directly in the tool. There is no delay after being woken and the battery is immediately ready for use.
3. Sliding batteryNew sliding battery with exact optical and acoustic charging status display prevents unpleasant sur-prises. The deep sleep function and the electrical feedback of the braking energy extend the battery range − a battery charge lasts for up to 2,000 ri-veting operations. Additional catching grids prevent falling.
4. Charging unitCharging unit with quick-charge function. The battery can be used again after only 45 minutes of charging, and is fully charged after just 90 minutes.
1. autoreverse function Immediately after mandrel break-off, this optional opera-ting mode stops the pulling process and moves the jaw assembly back into the initial position. This saves time and energy while making sure the tool is immediately ready for use.
2. LightingThe light-emitting diodes precisely aligned to the work piece are integrated into the adjusting ring. There are three possible switch positions: Process-controlled: The diodes remain illuminated after the setting process, which allows a continuous workflow even in bad lighting conditions.Torch function :Steady glow of diode (max.10 minutes)Lighting off: saves electricity.
Characteristics
advantages• More powerful and longer-lasting BLDC
motor for quick flow of work • 25 mm stroke for long blind rivets • Up to 20 kN setting force for particularly
large blind rivets• Variable lighting in the adjusting ring
• Increased stability due to larger, non-slip stand surface and lower centre of gravity
• Easy-to-grasp housing thanks to Softgrip• New sliding battery • Charging unit with quick-charge function
Battery-powered blind rivet setting toolswith brushless motor
Charging technology The GESIPA® li-ion chargers are available for 110 V and 240 V AC voltages. The charger comes with a Euro plug as standard. Other versions for China, UK and USA are available on request.
100100 The experts in riveting technologies
AccuBird® Pro
accuBird® Pro With slide-on, rechargeable 18.0 V/2.1 Ah battery pack and charger in plastic carrying case
accuBird® Pro With two slide-on, rechargeable 18.0 V/2.1 Ah battery packs and charger* in plastic carrying case
accuBird® ProThe brushless motor and 10,000 N setting force make the AccuBird® Pro extremely fast for setting blind rivets of any material up to Ø 5 mm.
extremely fast, virtually no wearThe BLDC motor of the AccuBird® Pro has an extre-mely long service life and is virtually non-wearing. Compared to commercially available battery-po-wered tools, setting can be done up to 4x faster making it comparable with hydropneumatic blind rivet setting tools.
The optional Autoreverse function additionally shortens the pulling process, ensuring the AccuBird® Pro is immediately ready for operation.
Well-proven and ergonomically designedThe AccuBird® Pro is equipped with the low-wear jaws system and features the same ergonomic design as the TAURUS® series, already proven a thousand times over.
the variable tool Blind rivets from Ø 2.4 mm aluminium, up to Ø 5 mm all ma-terials and blind rivets up to Ø 6 mm aluminium. BULB-TITE® blind rivets up to Ø 4 mm and 5.2 mm aluminium and steel. G-Bulb blind rivets up to Ø 4.8 mm all materials.
make sure the correct jaw pusher is used as specified in the operating instructions!
the latest generation of the battery-powered blind rivet setting tool – up to 4x faster than other battery-powered tools on the market!
Dimensions in mm
Part no. 143 5447
Part no. 143 2365
* Supplied with Euro plug as standard (other versions on request)
101
2Co
rdle
ss b
lind
rive
t se
ttin
g to
ols
The experts in riveting technologies
Jaws (3-part)
technical dataSetting force: 10,000 NWeight: 2.0 kg with batteryDrive: 18 V brushless DC motor (BLDC)Stroke: 25 mm
equipment Nosepieces: 17/24, 17/27, 17/29 and 17/32
18.0 V/2.1 ah li-ion slide-on battery pack
Weight: 0.4 kg available as special accessory
Charger for 18.0 V li-ion battery
technical dataInput voltage: 100 - 240 V / 50 - 60 HzOutput voltage: 21 V DCCharging time: 45 to 90 minutes Weight: 0.6 kg
Note: Equipped with Euro plug as standard(other versions on request)
AccuBird® Pro – the battery-powered blind rivet setting tool with 10 kN setting force and brushless motor
retaining nosepiece
Part no. retaining nosepiece
Part no.
17/18 R 143 5010 17/29 R 143 5013
17/24 R 143 5011 17/32 R* 143 5014
17/27 R 143 5012 17/36 R* 143 5015
*also for PowerBird®
• Inserted rivet remains in any position
• Rivets may be set with only one hand
• Safer working
Blind rivet Ø in mm
material approx. pc /
batterycharge
nose-piece
Part no.
2.4 Alu 1,800 17/18* 143 4976
3.2 CAP-Alu, CAP-Cu 1,300 17/18* 143 4976
3 and 3.2 Alu 1,100 17/24 143 4955
3 and 3.2 Steel 1,100 17/24 143 4955
3 and 3.2 Stainless steel 1,100 17/24 143 4955
4 Alu 1,100 17/24 143 4955
4 Steel 1,000 17/27 143 4973
4 Stainless steel 950 17/29 143 4974
4.8 and 5 Alu 850 17/29 143 4974
4.8 and 5 Steel 750 17/32 143 4975
4.8 and 5 Stainless steel 550 17/36* 143 4977
6 Alu 400 17/36* 143 4977
* available as special accessorySpecial design nosepieces are available on request. The nosepiece allocation data applies to DIN and GESIPA® blind rivets.
Blind rivet Ø in mm
material approx. pc /
batterycharge
nose-piece
Part no.
4 Alu 1,300 17/26 BT* 143 4985
5.2 Alu 1,100 17/32 BT* 143 4986
6.3 Alu 800 17/42 BT* 143 4988
6.3 Steel 550 17/42 BT* 143 4988
nosepiece assignment Power per battery charge
Special accessory: retaining nosepiece
one-piece extension unit for setting rivets in deep positions and with difficult access
One-piece, slim extension unit approx. 106 mm
One-piece, slim extension unit approx. 156 mm
Further extension units on page 108, 172 and 173.
Part no. 143 5568
Part no. 145 7641
Part no. 145 7642
BULB-tite® blind rivet
Part no. 145 0860
Part no. 145 0861
102102 The experts in riveting technologies
PowerBird® Pro
PowerBird® ProWith slide-on, rechargeable 18.0 V/2.1 Ah battery pack and charger* in plastic carrying case
Powerful and fastThe PowerBird® Pro enhances the new Pro series. With a setting force of 15,000 N and the well-pro-ven brushless motor, the PowerBird® Pro is powerful and fast when setting blind rivets up to Ø 6.4 mm in any material. The optional Autoreverse function additionally shortens the pulling process, ensuring the PowerBird® Pro is immediately ready for opera-tion. The stroke has been substantially increased to 25 mm for the purpose of setting particularly long rivets.
even faster, virtually no wearSince no wear-prone brushes are use, the motor of the PowerBird® Pro has an extremely long service life, is virtually non-wearing and and reliably guarantees the fastest setting frequencies.
Well-proven and ergonomically designedThe PowerBird® Pro is equipped with the low-wear jaws system and features the same ergonomic design as the TAU-RUS® series, already proven a thousand times over.
the variable toolBlind rivets from Ø 4.8 mm steel, up to Ø 6.4 mm all mate-rials, up to Ø 8 mm aluminium, except G-Bulb Ø 6.4 mm. BULB-TITE® blind rivets up to Ø 7.7 mm all materials. MEGA GRIP® blind rivets up to Ø 6.4 mm all materials.
make sure the correct jaw pusher is used as specified in the operating instructions!
PowerBird® ProWith two slide-on, rechargeable 18.0 V/2.1 Ah battery packs and charger* in plastic carrying case
* Supplied with Euro plug as standard (other versions on request)
PowerBird® Pro – the all-rounder in the Pro series. it combines exceptional speed with high power!
Dimensions in mm
Part no. 145 0814
Part no. 145 0810
103
2Co
rdle
ss b
lind
rive
t se
ttin
g to
ols
The experts in riveting technologies
Jaws (3-part)
technical data Setting force: 15,000 NWeight: 2.0 kg with batteryDrive: 18 V brushless DC motor (BLDC)Stroke: 25 mm
equipment Nosepieces: 17/32, 17/36, 17/40 and 17/45
18.0 V/2.1 ah (li-ion) slide-on battery pack
Weight: 0.4 kg available as special accessory
Charger for 18.0 V li-ion battery
technical dataInput voltage: 100 - 240 V / 50 - 60 HzOutput voltage: 21 V DCCharging time: 45 to 90 minutesWeight: 0.6 kg
Note: Equipped with Euro plug as standard (other versions on request)
• Inserted rivet stays in any position
• Set rivets with only one hand
• Safer working
Special accessory: retaining nosepiece
Blind rivet Ø in mm
material approx. pc /
batterycharge
nose- piece
Part no.
4.8 and 5.0 Steel, Alu 1,000 17/32 143 4975
4.8 and 5.0 Stainless steel 700 17/36 143 4977
6.0 Alu 650 17/36 143 4977
6,0 Steel 500 17/40 143 4999
6.4 Alu, PG-Alu 550 17/45 143 4860
6.4 Steel 450 17/45 143 4860
8 Alu 500 17/45 143 4860
4.0 Alu 1,200 17/26 BT* 143 4985
5.2 Alu 1,000 17/32 BT* 143 4986
6.3 Alu 800 17/42 BT* 143 4988
6.3 Steel 700 17/42 BT* 143 4988
6.3 Monel 650 17/42 BT* 143 4988
7.7 Alu 700 17/48 BT* 143 4989
4.8 Alu 800 17/31 MG* 143 4993
4.8 Steel 750 17/31 MG* 143 4993
4.8 Stainless steel 750 17/31 MG* 143 4993
6.4 Alu 700 17/41 MG* 143 4865
6.4 Steel 300 17/41 MG* 143 4865
6.4 Stainless steel 250 17/41 MG* 143 4865
* Available as special accessory
Special design nosepieces are available on request. The nosepiece allocation data applies to DIN and GESIPA® blind rivets.
nosepiece assignment
BULB-tite® blind rivets*
meGa GriP® blind rivets*
PowerBird® Pro – the battery-powered blind rivet set-ting tool with 15 kN setting force and brushless motor
retaining nosepiece Part no.
17/32 R 143 5014
17/36 R 143 5015
17/40 R 145 7347
17/45 R 145 7348
one-piece extension unit for setting rivets in deep positions and with difficult access
One-piece, slim extension unit approx.106 mm
One-piece, slim extension unit approx.156 mm
Further extension units on page 108, 172 and 173.
Part no. 143 5568
Part no. 145 7641
Part no. 145 7642
Part no. 145 7650
Part no. 145 7651
104104
i
The experts in riveting technologies
PowerBird® Pro Gold Edition
even more powerfulThanks to the brushless motor and the 20,000 N setting force the PowerBird® Pro Gold Edition is even more powerful and can even set G-Bulb and Poly-Grip® blind rivets up to Ø 6.4 mm in any material. The optional Autoreverse function additionally shor-tens the pulling process, ensuring the PowerBird® Pro Gold Edition is immediately ready for operation.
The stroke has been substantially increased to 25 mm for the purpose of setting particularly long rivets.
even faster, virtually no wearSince no wear-prone brushes are use, the motor of the Power-Bird® Pro Gold Edition has an extremely long service life, is virtually non-wearing and and reliably guarantees the fastest setting frequencies.
Well-proven and ergonomically designed The PowerBird® Pro Gold Edition is equipped with the low-wear jaws system and features the same ergonomic design as the TAURUS® series, already proven a thousand times over.
the variable tool Blind rivets up to Ø 6.4 mm all materials and up to to Ø 8 mm aluminium. BULB-TITE® blind rivets up to Ø 7.7 mm all materi-als. MEGA GRIP® blind rivets up to Ø 6.4 mm all materials.
make sure the correct jaw pusher is used as specified in the operating instructions!
* Supplied with Euro plug as standard (other versions on request)
PowerBird® Pro Gold edition – the strong one for high volumes and fast working sequences
Dimensions in mm
PowerBird® Pro Gold editionWith slide-on 18.0 V/2.1 Ah battery pack, char-ger* in plastic carrying case as well as additional jaw pusher for smaller blind rivet dimensions.
PowerBird® Pro Gold editionWith two slide-on, rechargeable 18.0 V/2.1 Ah battery packs and charger* in plastic carrying case
Part no. 145 7636
Part no. 145 7640
105
2Co
rdle
ss b
lind
rive
t se
ttin
g to
ols
The experts in riveting technologies
technical data Setting force: 20,000 NWeight: 2.0 kg with batteryDrive: 18 V DC brushless DC motor (BLDC)Stroke: 25 mm
equipment Nosepieces: 17/32, 17/36, 17/40 and 17/45
Blind rivet Ø in
mm
material approx. pc /
batterycharge
no-sepiece
Part no.
4.8 and 5.0 Steel, Alu 1,800 17/32 143 4975
4.8 and 5.0 Stainless steel 1,600 17/36 143 4977
6.0 Alu 1,000 17/36 143 4977
6.0 Steel 650 17/40 143 4999
6.4 Alu, PG-Alu 600 17/45 143 4860
6.4 Steel 550 17/45 143 4860
8 Alu 550 17/45 143 4860
4.0 Alu 1,300 17/26 BT* 143 4985
5.2 Alu 1,200 17/32 BT* 143 4986
6.3 Alu 800 17/42 BT* 143 4988
6.3 Steel 550 17/42 BT* 143 4988
6.3 Monel 600 17/42 BT* 143 4988
7.7 Alu 700 17/48 BT* 143 4989
* Available as special accessoryCan be combined with accessories of other battery-powered blind rivet setting tools.Special design nosepieces are available on request. The nose- piece allocation data applies to DIN and GESIPA® blind rivets.
nosepiece assignment
BULB-tite® blind rivets*
meGa GriP® blind rivets*
PowerBird® Pro Gold Edition – the battery-powered blind rivet setting tool with 20 kN setting force and brushless motor
technical dataInput voltage: 100 - 240 V / 50 - 60 HzOutput voltage: 21 V DCCharging time: 45 to 90 minutes Weight: 0,6 kg
Note: Equipped with Euro plug as standard (other versions on request)
• Inserted rivet stays in any position
• Set rivets with only one hand
• Safer working
Special accessory: retaining nosepiece
one-piece extension unit for setting rivets in deep positions and with difficult access
One-piece, slim extension unit approx.106 mm
One-piece, slim extension unit approx.156 mm
retaining nosepiece Part no.
17/32 R 143 5014
17/36 R 143 5015
17/40 R 145 7347
17/45 R 145 7348
Jaws (3-part)
18.0 V/2.1 ah (li-ion) slide-on battery pack
Weight: 0.4 kg available as special accessory
Charger for 18.0 V li-ion battery
Further extension units on page 108, 172 and 173.
Part no. 143 5568
Part no. 145 7641
Part no. 145 7642
Part no. 145 7650
Part no. 145 7651
4.8 Alu 1,000 17/31 MG* 143 4993
4.8 Steel 950 17/31 MG* 143 4993
4.8Stainless
Steel900 17/31 MG* 143 4993
6.4 Alu 950 17/41 MG* 143 4865
6.4 Steel 250 17/41 MG* 143 4865
6.4Stainless
Steel250 17/41 MG* 143 4865
106106 The experts in riveting technologies
the well-proven spring-loaded trigger system of the taUrUS® series now also for the Bird Pro series
The spring-loaded trigger system ensures that the parts to be riveted reliably make contact without any gaps before riveting. Furthermore, the operator will be certain that the blind rivet has reached its end position in the hole before setting and the setting head is in contact with the material. The pressing force can be varied with springs depending on the application.
functional principleThe surface contact trigger mechanism is also installed on the trigger button of the device. It only allows the riveting device to trigger when a set compressive force on the part is reached. This ensures that the various components in the application are pressed correctly onto each other before the riveting process. This means that uncontrolled deforma-tion of the rivet body between the materials is prevented, which would otherwise go andetected.
The surface contact force can be varied in five steps. It is set by either adding or removing springs. This rules out the possibility of unintentionally changing the defined surface contact force. A row of pushbuttons is arranged in front of the standard trigger button. On overcoming the spring force and reaching the defined surface contact force, the riveting process can only be triggered by pressing the yellow button.
dimensioned drawing of PowerBird® Pro Gold edition with spring-loaded trigger system
Bird Pro series with spring-loaded trigger system
technical data: See AccuBird Pro®, Page 100.See PowerBird Pro®, Page 102.See PowerBird Pro® Gold Edition, Page 104.Dimensions in mm
Example image of PowerBird® Pro
The tools come with slide-on 18.0 V/2.1 Ah battery pack and charger in plastic carrying case
accuBird® Pro with spring-loaded trigger system
PowerBird® Pro with spring-loaded trigger system
PowerBird® Pro Gold edition with spring-loaded trigger system
Part no. 150 2102
the spring-loaded trigger system is only sup-plied completely mounted. retrofitting in only possible through GeSiPa®.
Part no. 150 2103
Part no. 145 7638
107
360°
2Co
rdle
ss b
lind
rive
t se
ttin
g to
ols
The experts in riveting technologies
technical dataWeight: 1.1 kgStroke: 23 mmTraction power: up to 20 kN
accessoiresNosepiece:17/45 WK
advantages• Realisation of small edge
clearances• High setting force in tight
installation areas• Large stroke• Simple assembly• Compact and robust design• Simple jaws maintenance• Use of standard jaws
The angle head 90° is designed for use in very narrow and confined spaces. The rugged design makes it possible to set blind rivets with a high setting force even in working areas that are diffi-cult to access.
The angle head 90° can set standard blind rivets with a diameter up to 6.4 mm in all materials and 8 mm in aluminium with a setting force up to 20 kN. The smallest edge distance is 15 mm, the head length 110 mm.
Jaws
Angle head 90° for the Bird Pro series
Part no. 146 4882
Part no. 143 5568
the angle head can be positi-oned freely in every position (360°) on the tensile axis.
Example image of PowerBird® Pro
Part no. 150 2102
Part no. 150 2103
Part no. 145 7638
108108 The experts in riveting technologies
transparent spent mandrel container now also for the Bird Pro series
The classic spent mandrel container of the Bird Pro series is now also available in a transparent version which allows you to keep an eye on the amount of spent mandrels.
Accessories for the Bird Pro series
extended by 30 mm:
extended by 60 mm:
Part no. 145 0838
Part no. 145 0839
extension for spent mandrel container Bird Pro series
one-piece extension units replace the steel head sleeve, they are slim and are therefore particularly suitable for tight spaces that are difficult to access (Total length = steel head sleeve + standard nosepiece). multi-piece extension units are suitable for riveting in low-lying places. They are screwed on between the tool and the existing steel head sleeve (total length = steel head sleeve + extension + standard nosepiece)
tool +35 mm +85 mm +135 mm
accuBird® Pro 145 0860 145 0861 145 0862
PowerBird® Pro 1457 650 145 7651 145 0823
PowerBird® Pro Gold edition 1457 650 145 7651 145 0823
tool 100 mm
accuBird® Pro 145 0859
PowerBird® Pro 145 0820
PowerBird® Pro
Gold edition 145 0820
one-pieceThe total length of the steel head sleeve is 35 mm each for 106 mm, 85 mm each for 156 mm and 135 mm each for 206 mm.
multi-pieceVariable extension of the steel head sleeve is possible in steps of 100 mm. The total length of the steel head sleeve, including the extension unit, is 171 mm for 100 mm.
extension units
tool +50 mm +100 mm +150 mm
PowerBird® Pro Gold edition
with spring-loaded trigger syst.145 0821 145 0822 -
Part no. 145 0837
109
MADE IN GermanY
A C C U B I R D ®
A C C U B I R D ®
2Co
rdle
ss b
lind
rive
t se
ttin
g to
ols
The experts in riveting technologies
The Bird series
from the creator of the battery-powered blind rivet setting tool!
the Bird seriesThe development of this Bird series for professional use by specialists and industrial users made GESIPA® the inventor of the cable-free and hose-free blind rivet setting technology. In 2012 the first of the devices, the AccuBird®, celebrated its twentieth birthday.
Production• Made in Germany• GESIPA® developement, market launch and
further developement since 1992 (AccuBird®), 1996 (PowerBird®), 1995 (FireBird®)
• 2014 Development and market launch of the new Bird Pro series
modernised on its 25th anniversaryOn the 25th anniversary of the AccuBird® the Bird series has been technically modernised and visually upgraded. The following modernisations have been implemented on the AccuBird®, PowerBird® and PowerBird® Solar:
• New battery management ensuring the longer-life battery is always ready
• Shorter pulling process with the new additional auto-reverse function. This reduces wear and increases the battery life.
• New lightweight and stable plastic case, same as the Pro- series case.
110110 The experts in riveting technologies
The Bird series
PackagingAccuBird®, PowerBird® and FireBird® are supplied in a plastic case .
modernised on its 25th anniversary• New battery management ensuring the longer-life
battery is always ready• Shorter pulling process with the new additional auto-
reverse function. This reduces wear and increases the battery life.
• New lightweight and stable plastic case, same as the Pro-series case.
Casing and accessories• Exchange for nosepieces and wrench for the AccuBird®
and PowerBird® on the device, for the FireBird® in the spent mandrel container
• The spent mandrel container, has an approx. volume of 190 cm³, which means it does not need to be emptied frequently
• Accessories and special models have been continuously
Li-ion rechargeable batteries with new battery managementThe GESIPA® AccuBird® and FireBird® battery-powered rivet setting tools are equipped as standard with a 1.3 Ah li-ion rechargeable battery. The GESIPA® PowerBird® variants come with a 2.6 Ah li-ion rechargeable battery. These li-ion batteries are equipped with a new battery management system that enables even longer battery life. The batteries are therefore always ready to use.
The powerful 2.6 Ah battery is also optionally available as a special accessory for the AccuBird® and FireBird®. Older tools can of course also be operated with the Li-Ion batteries. Due to the different charging principle used in the Li-Ion technology, the charging unit must also be replaced when switching over to Li-Ion batteries; the proven charging units for NiCd batteries are however still available.
With Li-ion energy• No memory effect• High energy yield through high voltage
and low weight for easy and fast operation• Extremely low self discharge• Battery shape allows the tool to be stored
standing on its battery
Practical aspects• Exchange nosepieces and wrench always
included in the tool • Compact, shockproof tool housing• Spent mandrel evacuation into the mandrel
container through backfilling and forwards through the nosepiece by gravity
• Fatigue-free working through well balanced weight repartition and ergonomic grip
mechanics, control system and battery• Reliable connection of the mechanics and
control system• Cast control system is water and dust-tight• User-friendly pluggable rechargeable battery
Charging technologyA special, intelligent circuit in the GESIPA® Li-Ion batteries protects against deep discharging, and ensures that the last setting cycle can be completed, before the battery signals its empty condition by switching off. The empty battery is ready for use again after a charging time of only about one hour.
The new GESIPA® Li-Ion charging units are of course also available for the alternating voltages of 110 VAC and 230 VAC.
With new battery management always ready to use
111
i Video
A C C U B I R D ®
2Co
rdle
ss b
lind
rive
t se
ttin
g to
ols
The experts in riveting technologies
AccuBird®
the well-proven blind rivet setting tools with Li-ionen energy
AccuBird® with battery 14.4 V / 1.3 Ah and charger, in carrying case
AccuBird® with two batteries 14.4 V / 1.3 Ah and charger, in carrying case
accuBird® – Production• Developed and produced in Germany
since 1992 by the inventor of the battery blind rivet setting tool
reliability• Electronic control• No mechanical switching components• Electronic temperature and overload protection• High reliability through low loss power trans-
mission via a highly efficient ball screw drive
freedom Cablefree tool for flexible operation in installation jobs and industry production
auto-reverse functionImmediately after mandrel break-off, this additional operating mode stops the pulling process and moves the jaw assembly back into the initial position. This reduces wear, saves time and energy while making sure the tool is immediately ready for use.
High performance• 10,000 N setting force• High pulling force for safe setting of blind
rivets up to 5 mm diameter in all materials• High yield per battery charge• Large 20 mm stroke
Versatility Blind rivets from Ø 2.4 mm aluminium, up to Ø 5 mm all ma-terials and blind rivets up to Ø 6 mm aluminium. BULB-TITE® blind rivets up to Ø 6.3 mm aluminium and steel.
High speed• High speed of operation through automatic resetting
of the jaw mechanism immediately after each setting process
With Li-ion energy• Choice of 1.3 Ah and 2.6 Ah Li-Ion batteries• Even greater production rate per battery charge thanks to
the new battery management system
Part no. 143 4898
Part no. 145 7235
112112 The experts in riveting technologies
AccuBird® – Rechargeable 14.4 volt riveting tool with Li-ion battery – Accessories
Charger 14.4 V Li-ionWorking rangeBlind rivets from Ø 2.4 mm aluminium, up to Ø 5 mm all materials and blind rivets up to Ø 6 mm aluminium. BULB-TITE® blind rivets up to Ø 6.3 mm aluminium and steel.
nosepieces17/24, 17/27, 17/29 and 17/32
technical dataWeight: 2.0 kg with batteryStroke: 20 mmDrive: DC motorTraction power: 10,000 N
technical data Input voltage: 230 V / 50 HzOutput voltage: 14.4 V DCRecharging time: 50 to 100 minutes (battery depending)Weight: 0.6 kg
Dimensions in mm
AccuBird® with battery14.4 V / 1.3 Ahand charger, in cardboard box
AccuBird® with battery14.4 V / 1.3 Ah,in cardboard box
AccuBird® with battery14.4 V / 1.3 Ah and charger with spring loaded trigger system in carrying case
Battery 14.4 V/1.3 ah (Li-ion)
Weight: 0.35 kg
Power battery14.4 V/2.6 ah (Li-ion)
Weight: 0.5 kg available as special accessory
With new battery management always ready to use
Part no. 145 7240
Part no. 145 7230
Part no. 145 7232
Part no. 145 7269
Part no. 143 4921
Part no. 145 7282
113
2Co
rdle
ss b
lind
rive
t se
ttin
g to
ols
The experts in riveting technologies
AccuBird® – Rechargeable 14.4 volt riveting tool with Li-ion battery – Accessories
nosepiece – power per battery charge
rivet Øin mm
material approx. pc/battery
charge
nose-piece
Part no.
2.4 Alu 1,500 17/18* 143 4976
3.2 CAP®-Alu, CAP®-Cu
1,000 17/18* 143 4976
3 and 3.2 Alu 800 17/24 143 4955
3 and 3.2 Steel 800 17/24 143 4955
3 and 3.2 Stainless steel
800 17/24 143 4955
4 Alu 800 17/24 143 4955
4 Steel 700 17/27 143 4973
4 Stainless steel
650 17/29 143 4974
4.8 and 5 Alu 550 17/29 143 4974
4.8 and 5 Steel 450 17/32 143 4975
4.8 and 5 Stainless steel
350 17/36* 143 4977
6 Alu 250 17/36* 143 4977
4 Alu 1,000 17/26 BT* 143 4985
5.2 Alu 800 17/32 BT* 143 4986
6.3 Alu 600 17/42 BT* 143 4988
6.3 Steel 300 17/42 BT* 143 4988
* available a special accessorySpecial design nosepieces are available on requestInformation about nosepiece allocations are valid for DIN compliant and GESIPA® blind rivets.
Universal nosepiece — 17To suit AccuBird®
Special accessory: retaining nosepiece
• Inserted rivet remains in any position
• Rivets may be set with only one hand
• Safer working
retaining nosepiece
Part no. retaining nosepiece
Part no.
17/18 R 143 5010 17/29 R 143 5013
17/24 R 143 5011 17/32 R* 143 5014
17/27 R 143 5012 17/36 R* 143 5015
*also for PowerBird®
one-piece, slim extension unit for setting rivets in deep positions and with difficult access approx. 117 mm, Ø 22.5 mm
Detailed information can be found on page 121.
Detailed information can be found on page 171.
extended spent mandrel container,to suit AccuBird® and PowerBird®
Changeover set for BULB-tite® blind rivets: jaw pusher, jaws and 3 nosepieces
Jaws (3 parts)
Part no. 143 4960
Part no. 145 7273
Part no. 145 7274
Part no. 143 5034
Part no. 143 5033
Part no. 143 4958
BULB-tite® rivet
114114
Video i
PowerBird ®20more than
YEARS
The experts in riveting technologies
PowerBird®
the well-proven blind rivet setting tool with Li-ion ener- gy and even highersetting performance
PowerBird® with power battery 14.4 Volt / 2.6 Ah and charger, in carrying case
PowerBird® with two power batteries 14.4 Volt / 2.6 Ah and charger, in carrying case
PowerBird® with power battery 14.4 Volt / 2.6 Ah and charger, in carrying case, with spring loaded-trigger system
PowerBird® innovationAs the stronger brother to the well-known AccuBird® the PowerBird® is the powerful extension of the so-called „Bird family“ from GESIPA® able to cope with all structure blind rivets.
Practical aspectsUser oriented scope of delivery: metal carrying case with one battery charger, one battery and four nosepieces
economy• Good price-performance ratio• Large working range• Short processing times• High service life thanks to 2.6 Ah power battery
PowerBird® – With Li-ion energy2.6 Ah battery, alternatively 1.3 Ah on request
PowerBird® – the VersatilityBlind rivets from 4.8 mm Ø steel, up to 6.4 mm Ø all materials and up to 8 mm alu, except G-Bulb Ø 6.4 mm. BULB-TITE® blind rivets up to 7.7 mm Ø all materials. MEGA Grip® blind rivets up to 6.4 mm Ø all materials.
Part no. 145 7186
Part no. 145 7190
Part no. 145 7207 Page14
Furtherinfo
115
2Co
rdle
ss b
lind
rive
t se
ttin
g to
ols
The experts in riveting technologies
PowerBird® – Rechargeable 14.4 volt power battery riveting tool with Li-Ion battery for even higher performance
Working rangeBlind rivets from Ø 4.8 mm steel, up to Ø 8 mm alu, up to 6.4 mm all materials, except G-Bulb Ø 6.4 mm. BULB-TITE® blind rivets up to Ø 7.7 mm, all materials. MEGA GRIP® blind rivets up to Ø 6.4 mm, all materials.
technical dataWeight: 2.2 kg with batteryStroke: 20 mmDrive: DC motor Traction power: 14,000 N
nosepieces17/32, 17/36, 17/40 and 17/45
Jaws (3 parts)
Dimensions in mm
Charger 14.4 V Li-ion
technical dataInput voltage: 230 V / 50 HzOutput voltage: 14.4 V DCRecharging time: 50 to 100 minutes (battery depending)Weight: 0.6 kg
Battery 14.4 V/1.3 ah (Li-ion)
Weight: 0.35 kg available as special accessory
Power battery 14.4 V/2.6 ah (Li-ion)
Weight: 0.5 kg
With new battery management always ready to use
Part no. 145 7269
Part no. 143 4921
Part no. 143 4104
Part no. 145 7282
116116 The experts in riveting technologies
PowerBird® – Rechargeable 14.4 volt power battery rive-ting tool with Li-Ion battery for even higher performance
one-piece, slim extension unit for setting rivets in deep positions One-piece, slim extension unit to approx. 110 mm, Ø 22.5 mm, for setting rivets in deep positions and with difficult access
One-piece, slim extension unit to approx. 160 mm, Ø 22.5 mm, for setting rivets in deep positions and with difficult acces
Further dimensions available upon request
extended spent mandrel containerto suit AccuBird® and PowerBird®
Special accessory: retaining nosepiece
• Inserted rivet remains in any position• Rivets may be set with only one hand• Safer work
retaining nosepiece Part no.
17/32 R 143 5014
17/36 R 143 5015
17/40 R 145 7347
17/45 R 145 7348
nosepieces – power per battery charge
meGa GriP® blind rivets
rivet Ø
mm
rivet material
approx. pc/bat-
tery rarge
nosepiece Part no.
4.8 and 5.0 Steel, Alu 700 17/32 143 4975
4.8 and 5.0 Stainless steel
600 17/36 143 4977
6.0 Alu 600 17/36 143 4977
6.0 Steel 300 17/40 143 4999
6.4 Alu, PG-Alu 450 17/45 143 4860
6.4 Steel 250 17/45 143 4860
8 Alu 350 17/45 143 4860
BULB-tite® blind rivets
4.0 Alu 1,000 17/26 BT* 143 4985
5.2 Alu 900 17/32 BT* 143 4986
6.3 Alu 600 17/42 BT* 143 4988
6.3 Steel 350 17/42 BT* 143 4988
6.3 Monel 400 17/42 BT* 143 4988
7.7 Alu 500 17/48 BT* 143 4989
and jaws 143 4173
* available as special accessory
Special design nosepieces are available on request Information about nosepiece allocations are valid for DIN compliant and GESIPA® blind rivets.
4.8 Alu 600 17/31 MG* 143 4993
6.4 Alu 450 17/41 MG* 143 4865
4.8 Steel 450 17/31 MG* 143 4993
6.4 Steel 150 17/41 MG* 143 4865
4.8Stainless
steel450 17/31 MG* 143 4993
6.4Stainless
steel150 17/41 MG* 143 4865
Part no. 145 7214
Part no. 145 7215
Part no. 143 5034
117
2Co
rdle
ss b
lind
rive
t se
ttin
g to
ols
The experts in riveting technologies
PowerBird® Solarideal for deep, difficult to access areas in solar applications
Working rangeBlind rivets from Ø 4.8 mm steel up to 6.4 mm all materials, except G-Bulb Ø 6.4 mm.BULB-TITE® blind rivets up to Ø 7.7 mm, all materials. MEGA GRIP® blind rivets up to Ø 6.4 mm all materials.
Dimensions in mm
Part no. 145 7191
technical dataWeight: 2.42 kg with batteryWorking stroke: 20 mmDrive: DC motorTraction power: 14,000 NExtension unit: approx.167 mm
equipmentapprox. 167 mm extension unittwo Li-Ion power batteries 2.6 Ah/14.4 VQuick chargerNosepieces 17/32, 17/36,17/40, 17/45 and 17/48 BTPlastic carrying case
the GeSiPa® SolarGrip® blind rivet program can be found on page 52.
Page14
Furtherinfo
118118 The experts in riveting technologies
the well-proven spring-loaded trigger system of the taUrUS® series now as well for accuBird® and PowerBird®
Contact force
Setting the contact force required for the trigger action
Moving steel sleeves
ensuring correct processing of the blind rivets by means of a defined contact pressure
This feature ensures that the materials of the riveting applica-tion will be pressed together before the rivet is installed, thus avoiding gaps in between. Moreover the operator will be cer-tain that the rivet has reached its end position in the applicati-on and that the setting head is in contact with the upper side of the material. The pressing force can be adjusted variably with springs depending on the application.
Process-secure blind riveting even of parts with gaps or recoiling elements
the function
The surface contact trigger mechanism is also installed on the trigger button of the device. It only allows the rivet device to be triggered if a settable compressive force on the part is reached. This ensures that the various components of the application are pressed correctly onto each other before the riveting process. In turn, this means that the uncontrolled deformation of the rivet body between the materials is pre-vented, which would otherwise go andetected.
The surface contact force may vary in five steps. It is set by either adding or removing springs. This rules out the possi-bility of unintentionally adjusting the defined surface contact force. Push buttons are arranged in series in front of the stan-dard trigger button. The rivet process can only be triggered by pressing the yellow trigger button when the spring force has been overcome and the defined surface contact force has been reached.
PowerBird® and AccuBird® versions with spring-loaded trigger system
119
2Co
rdle
ss b
lind
rive
t se
ttin
g to
ols
The experts in riveting technologies
Dimensions in mm
PowerBird® and AccuBird® versions with spring-loaded trigger system
the spring-loaded trigger system is only supplied completely mounted. it can only be retrofitted by GeSiPa®.
PowerBird® dimension drawing with spring-loaded trigger system
accuBird® with spring-loaded trigger systemwith battery14.4 V /1.3 Ah and charger, in metal carrying case, Nosepieces 17/24, 17/27, 17/29 and 17/32
PowerBird® with spring-loaded trigger sytemwith power battery 14.4 Volt / 2.6 Ah and charger, in metal carrying case, Nosepieces 17/32, 17/36, 17/40 and 17/45
PowerBird® Solar with spring-loaded trigger system with power battery 14.4 Volt/2.6 Ah and charger, in plastic carrying case, Nospieces 17/32, 17/36, 17/40 and 17/45 approx. 160 mm extension unit
Part no. 145 7232
Part no. 145 7207
Part no. 146 4037
PowerBird® and AccuBird® versions with spring-loaded trigger system
Page14
Furtherinfo
Page14
Furtherinfo
120120
360°
The experts in riveting technologies
Can be swivelled 360° on the accuBird® and PowerBird® tensile axis
Angle head 90° compact for PowerBird® and AccuBird®
descriptionUsing the angle head 90° compact for PowerBird® and Accu-Bird® allows to set all Types of standard blind rivets up to 5 mm in diameter and aluminium up to 6 mm diameter, depen-ding on the tool Type. The minimum edge clearance is 12 mm, the head length is 90 mm. The angle head can be freely fixed in any position aroand the AccuBird® and PowerBird® tensile axis (360° free rotation).
applicationThe angle head 90° compact is designed for use in tight spaces. Its sturdy design allows it to apply large setting forces when setting blind rivets even in difficult of access work areas with up to10 kN.
technical dataWeight: 0.7 kgStroke: 20 mmTraction power: up to10 kN
accessoiresNosepieces:16/36
advantages• Realisation of small edge
clearances (12 mm)• High setting force in tight installation
areas (up to 10 kN)• Large stroke (up to20 mm)• Simple assembly• Compact and robust design• Simple jaws maintenance• Use of standard jaws• Low vibration, even at high
breaking force level
Dimensions in mm
Part no. 145 7252
121
2Co
rdle
ss b
lind
rive
t se
ttin
g to
ols
The experts in riveting technologies
tool 50 mm 100 mm 150 mm
accuBird® 145 7273 145 7274 145 0622
PowerBird® 145 7214 145 7215 146 4038
PowerBird®
with spring-loaded trigger system 145 7222 145 7224 -
tool 100 mm
accuBird® 145 7318
PowerBird® 145 7229
Extension units for PowerBird® and AccuBird®
one-piece extension unitsFor setting rivets in deep positions and with difficult access.Total length = steel head sleeve + standard nosepiece
multi-piece extension unitsFor setting rivets in deep positions. They are screwed on between the tool and the existing steel head sleeve. Total length = steel head sleeve + extension + standard nosepiece
multi-pieceVariable extension of the steel head sleeve is possible in steps of 100 mm. The totallength of the steel head sleeve, including the extension unit, is 167 mm for 100 mm.
one-pieceThe total length of the steel head sleeve is 117 mm each for 50 mm, 167 mm each for 100 mm and 217 mm each for 150 mm.
Angle head 90° compact for PowerBird® and AccuBird®
technical dataWeight: 0.7 kgStroke: 20 mmTraction power: up to10 kN
accessoiresNosepieces:16/36
advantages• Realisation of small edge
clearances (12 mm)• High setting force in tight installation
areas (up to 10 kN)• Large stroke (up to20 mm)• Simple assembly• Compact and robust design• Simple jaws maintenance• Use of standard jaws• Low vibration, even at high
breaking force level