Cop

yrig

ht 2

018

Tecn

oste

el S

RL

– A

ll ri

ghts

rese

rved

eng

• 201

8

Apertura porte 180° Nuovo design bi‑colore Maniglia a pulsante Compatibile con tutti gli accessori Tecnosteel Montanti conta unità Su versione Server supporti montanti guidati e numerati

Door opening 270° New two‑colours design Button handle Compatible with all of the Tecnosteel accessories Uprights with unit number In the server version support uprights driven and numbered

2

1998

A rational design & a touch of colour The frame is connected by three-way joints in cast aluminum; the front and rear tubulars of the structure are blue and integrates the usual colour grey or black .

Greater capacityThe new construction solutions allows to reach a capacity to 1000 kg.

More space and full accessThe Progress structure has the same size as Tecno but allows a direct access to the external units and to the grounding points both throw the doors and the side panels.

270° opening doors The new hinge allows the doors to open at 270°

Handle with snap openingThe new handle mounts a snap button which releases the opening lever, thus making superfluous the fixed presence of the key that now has the only function of the block.

FlatPack version• It is the solution that reduces the volume of storage

and transport by up to 50%.• It is ideal for places with difficult access.• It is essential when the use of ladders is necessary.• It is assembled in 10 minutes with a few standard

tools.

All models in any size can be purchased in FlatPack version with “FP” suffix for the code (eg P8842FP).

19” uprights with units numberRacks 800 mm and 1000mm depth are equipped with 2 pairs of mounted; 600 mm and 400 mm depth models are equipped with a pair of 19” uprights.To make quick and easy setting-up operations on the uprights are printed units; Server models are numbered even the guides uprights.

Racks ProgressThe new quality floor rackTecno sells a step to Progress. Aligned with the tecnosteel standard quality level, the new product offers reliability and robustness with much more advantages. Let’s find out!

3

2015

Easy and fast mountingJust a simple key to assemble and disassemble Progress. Thanks to the special hinges disassembly of the doors is simple, fast, safe and without tools. The tempered glass door complies with UNI EN 12150-1.

LiftThe three-way joints of the roof permit the mounting of the lifting eyebolts.

LevelingOn the base it is possible to assemble plinths, leveling feet or wheels (F9043, page 10).

4

5

SERVERRacks 1000 mm depth

to house serversProvided with two pairs of uprights with

counting unit; guides uprights numbered allow

the horizontal moving continuous and precise;

the capacity is 1000 kg.Colours:

black; grey.

Standard configurationTempered glass doors and blind panels;

perforated front and rear doors; blind  panels.

100 mm tall skirting.

CustomizationAvailable all combination with:

blind single or double doors; 75% perforation single or double doors;

blind panels; 40% perforation panels;

instead of skirting leveling feet, wheels, combination between feet and wheels.

U H (!) W D Code * Description27 1390 600 1000 P6127

With front glass door, side and rear blind panels, 100mm h. plinth, front&rear 19” uprights

42 2057 600 1000 P614247 2279 600 1000 P614727 1390 800 1000 P812742 2057 800 1000 P814247 2279 800 1000 P8147

42 2057 600 1000 P6142AP75 With front&rear 75% perforated door, side blind panels, 100mm h. plinth, front&rear 19” uprights

47 2279 600 1000 P6147AP7542 2057 800 1000 P8142AP7547 2279 800 1000 P8147AP75

42 2057 600 1000 P6142A2P75 With front single & rear double, 75% perforated doors, side blind panels, 100mm h. plinth, front&rear 19” uprights

47 2279 600 1000 P6147A2P7542 2057 800 1000 P8142A2P7547 2279 800 1000 P8147A2P75

U = UnitsH = Includes 100 mm height of the plinth (!) = for feet only subtract 83 mm from value in column H;W = Width; D = Depth; * For black colour add “N” at the end of the code

6

7

NET

Racks for networkSupplied with uprights

with unit number;available in a wide range

of size  and  configuration;load capacity 750 kg;

colours: grey and black

U H W D Code Description27 1390 600 400 P6427 Rack with glass front door, blind rear and side panels,

skirting 100 mm high, double pair of 19” uprights on 800 mm depth versions, grey and black*

42 2057 600 400 P644220 1079 600 600 P662024 1257 600 600 P662427 1390 600 600 P662733 1656 600 600 P663338 1879 600 600 P663842 1957 600 600 P664247 2279 600 600 P664720 1079 600 800 P682024 1257 600 800 P682433 1656 600 800 P683338 1879 600 800 P683842 2057 600 800 P684247 2279 600 800 P684733 1656 800 600 P863338 1879 800 600 P863842 2057 800 600 P864247 2279 800 600 P864720 1079 800 800 P882027 1390 800 800 P882733 1656 800 800 P883338 1879 800 800 P883842 2057 800 800 P884247 2279 800 800 P8847

U = Units, H= Overall height including pedestal, W = Width, D = Depth * black adds N at the end of the code - eg. P8842NOn the last page all the equipment options the racks with panels and doors.

8

Accessories for 19” racksProgress maintains the whole compatibility with the wide range of tecnosteel accessories, available in the standard colours black and grey (for the black products an “N” has to be added to the code).

The new cable ductThe new vertical cable duct was born together with Progress (only for 800 mm width racks). It is equipped with practical cable ducts; in the rear part it is possible to mount in vertical position 1 U 19” devices. The number will be different according the height (blue part in the drawing). The door increases the efficiency of the compartmentalization of the air flows and gives a neat and compact shape to your cabling.

Pair of vertical cable ducts with door for 800 mm width rackP9093 height 24UP9094 height 27UP9095 height 33UP9090 height 38UP9091 height 42UP9098 height 47U

19” 1U sliding drawers for fibre-optic (available only black)

U Code Description1 F9290N 24SC SMPLX/24LC DPLX1 F9291N 24SC DPLX1 F9293N 24ST SMPLX1 F9294N 12SC DPLX1 F9315N 12SC SMPLX/12LC DPLX1 F9378N 12ST SMPLX

Kit vertical cable duct and 2 fixing brackets

P9555 100 x 20 mm for 42U racks – 600 mm depthP9863 100 x 20 mm for 42U racks – 800 mm depthP9862 100 x 20 mm for 47U racks – 600 mm depthP9861 300 x 20 mm for 42U racks – 800 mm depthP9868 300 x 20 mm for 42U racks – 1000 mm depthP9860 300 x 20 mm for 47U racks – 800 mm depthP9867 300 x 20 mm for 47U racks – 1000 mm depth

9

Cable management panel with 4 steel rings

F9369 1UF9298 2U

DIN rail box

F3030 3U

Cable inlet panel with brush

F9313N 1U

Cable inlet panel with brushF9297 for 600mm base depthF9306 for 600mm base depth

Cable holding bracketP9087 for rack width/depth 600 mmP9088 for rack width/depth 800 mmP9417 for rack width/depth1000 mm

Blind panels

F9012 1UF9102 2UF9013 3UF9253 4U

Cable management panel with 4 short plastic rings

F9030N 1U

Cable management panel with 4 long plastic rings

F9031 1U

Blind 19” panels quick mounting without tools

Code DescriptionT9011N 1UT9012N 2UT9014N 4U

Cable inlet brush for roof

F9324

Kit bottom cable inlet panel for 1000mm deep cabinets

F9366 3 brushes kit

Anti-topple deviceCode DescriptionP9095 For 600mm width cabinetsP9240 For 800mm width cabinets

10

F9335N

F9008

F9100

Kit 4 M10 leveling feet

F9044 height 40 mmP9097 height 100 mm for Progress Server

Wheels – Capacity 250 kg (to be mounted onto the joint instead of the feet)

F9043 Kit 4 wheels, 2 with brakes Static load capacity 360 kg Dynamic load capacity 225 kg

Wheels – Capacity 700 kg (Only for server racks. The wheels can be mounted also together with the feet)

F9038 Kit di 4 wheels

Kit 4 joints

F9042 To join two racks with plinth. Screws and nuts included

Kit 4 joints

F9042 To join two racks with plinth. Screws and nuts included

Sets of cage nuts and screwsCode DescriptionF9040 Set of M6 cage nuts and M6x14

screws (50 pcs)F9041 Set of M6 cage nuts, M6x14 screws

and plastic washers (50 pcs)F9478 Set of 4 M6 cage nuts and 4

M6x14 screwsF9482 Set of 4 M6 cage nuts, 4 M6x14

screws and 4 plastic washersF9040N Set black of M6 cage nuts

and M6x14 screws (50 pcs)F9041N Set of black M6 cage nuts, M6x14

screws and plastic washers (50 pcs)F9478N Set of black M6 cage nuts

and M6x14 screws (4 pcs)F9482N Black Set of M6 cage nuts, M6x14

screws and plastic washers (4 pcs)

Cantilever fix shelves 19''

Code U Description Capacity kg

F9292 1 Depth 200 mm 15F9000 2 Depth 250 mm 25F9494 1 Depth 250 mm 15F9243 1 Depth 310 mm - for racks with minimum depth 420 mm 15F9107 1 Depth 350 mm - for racks with minimum depth 520 mm 15F9001 2 Depth 400 mm - for racks with minimum depth 520 mm 25

Cantilever sliding shelves 19’’

Code U Description Capacity kg

F9103 2 Depth 520 mm 25F9094 2 Depth 470 mm - for racks with minimum depth 600 mm 50F9105 2 Depth 600 mm - for racks with minimum depth 800 mm 40F9224 2 Depth 470 mm - for racks with minimum depth 600 mm

With swivel device port mouse and keyboard25

On 4-19” uprights fixing fix shelvesFixing on 4-19” uprights (rear support panel included)

Code U Description Depth mm Capacity kg

F9100 2 For racks with minimum depth 600 mm 470 80F9002 2 For racks with minimum depth 800 mm 600 80F9089 2 For server racks 750 80F9008 1 Exstensible - for racks min. depth 600 mm 427 ~ 755 30F9335N 1 Exstensible - for racks min. depth 800 mm 550 ~ 788 150

Kit mounting feet on skirting

F9295Includes 4 M10 feet, adapters and screws

ShelvesAll the shelves are available with single packaging or multiple packaging with scaling price

11

F3022NS

F3020NS

F3041NS

F3071N

F3560

F3561

T3101H

Roof ventilation units

Code DescriptionF9061 Axial fanP9062 2 fans unit - silverP9063 3 fans unit - silverP9064 4 fans unit - silverP9062T 2 fans unit with thermostat - silverP9063T 3 fans unit with thermostat - silverP9064T 4 fans unit with thermostat - silver

Specific area ventilation unit - 19” fixing

Code DescriptionP9092T 2 fans unit with light switch and thermostat - silver

Dust proof filtersThe bottom of the floor rack are set for the mounting of dust filters. This device can be easily opened and closed for the filter cleaning.

Power distribution units, colour black, 2m cableCode Description U Fixing 19" Vert. fixingF3020NS 6 outlets, light switch 1 • •F3021NS 5 outlets, circuit breaker 1P+N 1 • •F3022NS 6 outlets, two poles circuit breaker 1 • •F3040N 9 outlets, circuit breaker 1P+N, schuko plug 1 • •F3041NS 9 outlets, light, schuko plug 1 • •F3052NS 12outlets, two poles circuit breaker 0 •F3053NS 12outlets, light switch 0 •

Power distribution units for server racks – colour black, cable 2,5 or 3 mCode Description U 19" fixing Vert. fixingT3101H 16A 250V - 12 outlets IEC320 C13 - light - with plug - outlet C20 * 1 • •F3560 16A 250V - 12 outlets IEC320 C13 - light - with plug IEC60309 * 1 • •F3561 16A 250V - 12 outlets IEC320 C13 - light - with plug IEC60309 * 1 • •F3067N 32A 220V - 6+6 outlets IEC320 C13 - 2 thermal and 2 lights - with

industrial plug1 •

F3068N 32A 220V- 4 outlets C19 4 thermal and 4 lights, with 3m cable - 60309 plug

1 •

F3071N 32A 220V- 6 outlets IEC320 C19+18 plugs C13 - digital ammeter, quick hanging system with industrial plug

0 •

Code DescriptionF9215 For rack 600 mm depthF9216 For rack 800 mm depthF9217 For rack 1000 mm depth

(*) Cables for T3101H

12

Tecnosteel s.r.l.

Via Pret 12

21020 Brunello (Va)

Italy

tel. +39 0332 46 26 04

fax: +39 0332 46 26 09

info@tecnosteel.it

www.tecnosteel.it

Head quarter Tecnosteel France4 Avenue du QuébecBP 653Bât Kerria Entrée N°291140 VILLEBON SUR YVETTEtél. +33 1 6974 1735fax +33 1 6049 0286www.bladeshelter.infowww.tecnosteel.fr

France

ISO 9001:2015

Setting upIn the frame of versatility of the Tecnosteel productsAs usual all the tecnosteel racks are available in several standard configurations but if you need a custom- fitting your rack will fully match with your needs (on our web catalog customers can create any customization with immediate download of the price quota-tion and the data sheet).

Side and rear panelsMade with steel sheet:Versions:• Blind• 40% perforation

Supports• 100 mm skirting• 200 mm skirting• Leveling feet• Wheels

Front and rear doors• Also available with 3 locking points in 42 and 47 U

Versions:• Tempered glass anti accident complying UNI EN 12150-1• 75% perforation *• Blind• Double glass door• Double 75% perforation door *• Double blind door

The frameThe configuration starts from the frame with a pair of uprights for 600mm depth cabinets, and two pairs of uprights for 800mm and 1000mm depth cabinets.

75% perforation *