copyright 2018. examreviewexamreview.net/wp/wp-content/uploads/2018/04/awsweldingsuperup…question...
TRANSCRIPT
69
Question 33
The welding procedure specification (choose all that apply):
Possible choices:
provides direction for welder.
depicts joint design.
depicts code requirements.
keeps a record of test results.
None of the choices.
ANSWER:
The welding procedure specification WPS is intended to provide direction for welder and depict the joint design and welding materials, parameters, and technique and code requirements. The procedure qualification record PQR is a record of test results for welds made in accordance with WPS.
Copyright 2018. ExamREVIEW.NET
70
Question 34
Procedure qualification record:
Possible choices:
requires destructive testing
does not require destructive testing
prohibits destructive testing
ANSWER:
Procedure qualification record PQR is a record of test results for welds made in accordance with WPS. Destructive testing is required for PQR.
Copyright 2018. ExamREVIEW.NET
71
Question 35
AWS D1.1:
Possible choices:
requires nondestructive testing for procedure qualification and so does ASME Section IX.
requires nondestructive testing for procedure qualification but ASME Section IX does not.
does not require nondestructive testing for procedure qualification:
prohibits nondestructive testing for procedure qualification:
None of the choices.
ANSWER:
AWS D1.1 requires nondestructive testing for procedure qualification but ASME Section IX does not.
Copyright 2018. ExamREVIEW.NET
72
Question 36
WQTR is the acceptable alternative to PQR.
Possible choices:
True
False
ANSWER:
False. Welder qualification test record WQTR have test results for proving that a welder is qualified to weld to a certain WPS. Tests may include guided bends, breaking of fillet welds, and macroetching...etc.
Copyright 2018. ExamREVIEW.NET
73
Question 37
The AWS D1.1 code qualification is for carbon and low-alloy metals with a minimum thickness of how many inches?
Possible choices:
1/2
1/3
1/4
1/6
1/8
1/12
None of the choices.
ANSWER:
The AWS D1.1 code qualification is for carbon and low-alloy metals with a minimum thickness of 1/8 in and a maximum yield of 100 KSI.
Copyright 2018. ExamREVIEW.NET
74
Question 38
Section 3 of the AWS D1.1 prequalification lists materials from 30 KSI to _____ KSI as Group I.
Possible choices:
68
56
46
42
33
None of the choices.
ANSWER:
The AWS D1.1 code qualification is for carbon and low-alloy metals. The prequalification Section 3 lists materials for prequalifying WPS. Group I lists lowest-yield-strength materials from 30 KSI to 46 KSI.
Copyright 2018. ExamREVIEW.NET
75
Question 39
AWS D1.3 does not cover cold formed members regardless of thickness.
Possible choices:
True
False
ANSWER:
False. AWS D1.3 Structural Steel Welding Code is the Structural Welding Code for Sheet Steel. It covers the arc welding of structural steel sheet/strip steels, which includes cold formed members equal to or less than 3/16 inch in nominal thickness.
Copyright 2018. ExamREVIEW.NET
76
Question 40
On drawings, what symbol primarily indicates the desired type of weld?
Possible choices:
weld symbols
field symbols
control symbols
supplementary symbols
None of the choices.
ANSWER:
A weld symbol typically indicates the desired type of weld while a welding symbol is a method that represents the weld symbol on drawings.
Copyright 2018. ExamREVIEW.NET
77
Question 41
A welding symbol may consist of which of the following elements (choose all that apply):
Possible choices:
reference line
arrow
basic weld symbols
dimensions
supplementary symbols
tail
welder qualification
ANSWER:
A welding symbol may consists of these elements: reference line, arrow, basic weld symbols, dimensions, supplementary symbols, finish symbols, tail, and specification, process...etc. NOT welder qualification.
Copyright 2018. ExamREVIEW.NET
78
Question 42
With a protective welding helmet, the filter glass should be marked to show (choose all that apply):
Possible choices:
manufacturer
shade number
letter “H’
letter “T”
welding standard
None of the choices.
ANSWER:
With a protective welding helmet, a cover plate should be placed outside the filter glass and the filter glass must be marked to show the manufacturer, the shade number, and the letter “H’ meaning it has been treated for impact resistance.
Copyright 2018. ExamREVIEW.NET
79
Question 43
A proper welding helmet would be in what color?
Possible choices:
red
yellow
dark blue
dull black
color does not matter
None of the choices.
ANSWER:
A welding helmet is generally made of pressed fiber insulating material. In order to minimize reflection and glare, the color is usually dull black.
Copyright 2018. ExamREVIEW.NET
80
Question 44
Woolen clothing is generally more preferable than cotton:
Possible choices:
as wool is not easily burned by weld spatter.
as wool can maintain body temperature more sufficiently
as wool does not conduct electricity
as wool is totally gap-less
None of the choices.
ANSWER:
Welders should wear work clothes without openings or gaps. Woolen clothing is preferable over cotton as wool is not easily burned by weld spatter.
Copyright 2018. ExamREVIEW.NET
81
Question 45
For Fillet welding symbols, there is an arrow that connects the welding symbol reference line to one side of the joint. This side:
Possible choices:
has no local significance at all.
always represents the arrow side of the joint.
always represents the other side of the joint.
ANSWER:
For Fillet, Groove, Flange, Flash, and Upset welding symbols, there is an arrow that connects the welding symbol reference line to one side of the joint. This side always represents the arrow side of the joint.
Copyright 2018. ExamREVIEW.NET
82
Question 46
The ______ of a welding symbol is often used to designate the welding and cutting processes.
Possible choices:
arrow head
tail
leader line
reference line
joint
None of the choices.
ANSWER:
The tail of a welding symbol is often used to designate the welding and cutting processes as well as other information, including the welding specifications and procedures, or other supplementary information.
Copyright 2018. ExamREVIEW.NET
83
Question 47
A carburizing flame will result in chemical change in steel but not iron.
Possible choices:
True
False
ANSWER:
False. A neutral flame in most cases will have no chemical effect on the metal being welded while a carburizing flame will produce iron carbide and result in chemical change in steel and iron.
Copyright 2018. ExamREVIEW.NET
84
Question 48
When the weld symbol is placed __________ the reference line, it means the weld must be performed on the arrow side of the joint.
Possible choices:
above
below
ANSWER:
When the weld symbol is placed below the reference line, it means the weld must be performed on the arrow side of the joint.
Copyright 2018. ExamREVIEW.NET
85
Question 49
Most of the time the weld diameter is located to the ________ of the weld symbol.
Possible choices:
left
right
top
bottom
ANSWER:
Most of the time the weld diameter is located to the left of the weld symbol while the length is located to the right.
Copyright 2018. ExamREVIEW.NET
86
Question 50
A flagpole at the intersection of the reference line and the leader line means:
Possible choices:
the work should be done on site
the work should be done in the shop
the work may be done without supervision
the work should be done under supervision
None of the choices.
ANSWER:
A flagpole at the intersection of the reference line and the leader line indicates a field weld, meaning the work should be done on site not in the shop.
Copyright 2018. ExamREVIEW.NET
87
Question 51
Local ventilation should be capable of producing a rate of air flow that is sufficient to maintain a velocity away from the welder of at least how many ft per minute?
Possible choices:
50
80
100
120
180
None of the choices.
ANSWER:
Local ventilation should be capable of producing a rate of air flow that is sufficient to maintain a velocity away from the welder of at least 100 ft (30 m) per minute.
END OF BOOK
Copyright 2018. ExamREVIEW.NET