coordinate measuring machines - microservice
TRANSCRIPT
MICRO 3D HA
SPECIFICATIONSRelease 2020-03
Micro 3D HA
Coordinate Measuring Machines
300
150312
152
252
(110
.ZZ)
150
300
SX2
GW
SY1
Y 11070,5
109,5 435,5
D1
D2
GH
GT
140
Z
II IISX1
Z
HZ
X
LX
M8 X 1,25
GL
SX2
LX
GL GW
SY1
Y 100
300
150255
156(
Y=90
0)25
6 (Y
=100
0)15
0
300
73
67 365
D1
D2
GH
GT
140
Z
II IISX1
Z
HZ
X
M8 X 1,25
DYNAMICSxx.07.07 xx.09.08 xx.10.08 xx.10.09 xx.10.10 xx.12.10 xx.15.10 xx.15.13
Cruise Speed max.
Motorized (axes) mm/s 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100
CNC (vector) mm/s 866 866 866 866 866 866 866 800
Acceleration CNC (vector) mm/s2 2000 2000 2000 1500 1200 1200 1000 900
Volumetric Length meas. Error, MPE as per ISO 10360-2:2009 1)
E0/E150 µm T1 1,5 + L/333 1,5 + L/333 1,7 + L/333 1,9 + L/333 2,4 + L/333 2,4 + L/333 2,5 + L/285 3,0+ L/285
E0/E150 µm T2 2,2 + L/200 2,3 + L/200 2,8 + L/200 2,8 + L/200 3,3 + L/200 3,3 + L/200 3,3 + L/166 3,7 + L/166
Repeatability range, MPL as per ISO 10360-2:2009 R0 µm 1,4 1,4 1,6 1,8 2,3 2,3 2,4 2,9
Single stylus form error, MPE as per ISO 10360-5:2010 PFTU µm 1,5 1,5 1,7 1,9 2,4 2,4 2,5 3,0
Single Stylus form error, scanning. MPE as per ISO 10360-4:2000 3)
THP µm 3,0 3,0 3,4 4,0 4,8 4,8 5,0 6,0
Required measuring time MPT Ƭ s 60 60 60 60 60 60 60 60
Single Stylus form error, scanning. MPE as per ISO 10360-4:2000 3)
THN µm 3,0 3,0 3,4 4,1 4,8 4,8 5,0 6,0
Required measuring time MPT Ƭ s 70 70 70 70 70 70 70 70
Form measurement error RONt (MZCI) 2) µm 1,6 1,6 1,8 2,0 2,5 2,5 2,6 3,1
SCANNING PROBE HEADS
Volumetric Length meas. Error, MPE as per ISO 10360-2:2009 1)
E0/E150 µm T1 1,8 + L/333 1,8 + L/333 1,9 + L/333 2,0 + L/333 2,4 + L/333 2,5 + L/333 2,6 + L/285 3,0 + L/285
E0/E150 µm T2 2,2 + L/200 2,2 + L/200 2,3 + L/200 2,8 + L/200 2,8 + L/200 3,3 + L/200 3,3 + L/166 3,7 + L/166
Repeatability range, MPL as per ISO 10360-2:2009 R0 µm 1,7 1,7 1,8 1,9 2,3 2,4 2,5 2,9
Single stylus form error, MPE as per ISO 10360-5:2010 PFTU µm 1,8 1,8 1,9 2,0 2,4 2,5 2,6 3,0
INDEXING HEADS OR FIXED HEADS WITH STRAIN-GAUGE TRIGGER PROBE
Volumetric Length meas. Error, MPE as per ISO 10360-2:2009 1)
E0/E150 µm T1 1,9 + L/333 1,9 + L/333 2,0 + L/333 2,2 + L/333 2,5 + L/333 2,7 + L/333 2,8 + L/333 3,5 + L/333
E0/E150 µm T2 2,4 + L/200 2,4 + L/200 2,5 + L/200 3,0 + L/200 3,0 + L/200 3,5 + L/200 3,5 + L/200 4,0 + L/200
Repeatability range, MPL as per ISO 10360-2:2009 R0 µm 1,8 1,8 1,9 2,1 2,4 2,6 2,7 3,4
Single stylus form error, MPE as per ISO 10360-5:2010 PFTU µm 2,0 2,0 2,1 2,2 2,5 2,7 2,8 3,5
INDEXING HEADS OR FIXED HEADS WITH TRIGGER PROBE
REVO RSP2/RSH175 - RSP3-1/SH25-1, stylus L = 20 mm
SP25 Stylus Ø5 x 50 mm
TP200 Standard Force Module and stylus Ø4 x 10 mm
Trigger Probe Standard Force Module and stylus Ø4 x 10 mm
Ambient T1 Ambient T2
Measuring Reference Temperature 18 °C to 22 °C 16 °C to 26 °C
Maximum air temperature variations 1,0 °C / h - 2,0 °C / 24h 1,0 °C / h - 5,0 °C / 24h
Maximum spatial gradient 1,0 °C / m 1,0 °C / m
TEMPERATURES TOOLS / STYLUS CONFIGURATIONS
METROLOGICAL SPECIFICATIONS
1) Measuring length L in mm.2) RONt test available on SP80 probe head, with Stylus Ø5 x 50 mm, 50 mm ring gauge, speed 5 mm/s, located in the middle of the measuring Volume.3) For MPE(THP/THN) and MPT(Ƭ): sphere is placed in the middle of the measuring volume.
300
150312
152
252
(110
.ZZ)
150
300
SX2
GW
SY1
Y 11070,5
109,5 435,5
D1
D2
GH
GT
140
Z
II IISX1
Z
HZ
X
LX
M8 X 1,25
GL
SX2
LX
GL GW
SY1
Y 100
300
150255
156(
Y=90
0)25
6 (Y
=100
0)15
0
300
73
67 365
D1
D2
GH
GT
140
Z
II IISX1
Z
HZ
X
M8 X 1,25
Micro 3D HA
sizes Measuring range Overall dimensions Surface plate Support position Daylights Weights
mm daN
X Y Z(1) Length Width Height Height Thick. Length Width Max. workpiece
weight
Machine weightMX MY MZ LX LY HZ GH GT GL GW SX1 SX2 SY1 D1 D2
10.07.07 1000 700 700 2152 1317 2843 670 200 1830 1110 415 1000 700 873 909 900 1380
12.09.08 1200 900 800 2352 1524 3073 700 250 2030 1310 455 1120 880 1073 1009 1300 2125
15.09.08 1500 900 800 2652 1524 3073 700 250 2330 1310 540 1250 880 1073 1009 1500 2400
20.09.08 2000 900 800 3152 1524 3073 700 250 2830 1310 665 1500 880 1073 1009 1800 2860
12.10.08 1200 1000 800 2352 1624 3073 700 250 2030 1410 455 1120 980 1173 1009 1400 2270
15.10.08 1500 1000 800 2652 1624 3073 700 250 2330 1410 540 1250 980 1173 1009 1600 2570
20.10.08 2000 1000 800 3152 1624 3073 700 250 2830 1410 665 1500 980 1173 1009 1900 3070
15.10.09 1500 1000 900 2832 1737 3339 700 250 2510 1440 555 1400 960 1180,5 1111 1500 2890
20.10.09 2000 1000 900 3332 1737 3339 700 290 3010 1440 655 1700 960 1180,5 1111 1600 3890
15.10.10 1500 1000 1000 2832 1737 3539 700 250 2510 1440 555 1400 960 1180,5 1211 1500 2890
20.10.10 2000 1000 1000 3332 1737 3539 700 290 3010 1440 655 1700 960 1180,5 1211 1600 3900
15.12.10 1500 1200 1000 2832 1937 3539 700 290 2510 1640 555 1400 1100 1380,5 1211 1800 3730
20.12.10 2000 1200 1000 3332 1937 3539 700 340 3010 1640 655 1700 1100 1380,5 1211 2300 5100
25.12.10 2500 1200 1000 3832 1937 3539 700 360 3510 1640 780 1950 1100 1380,5 1211 2400 6210
20.15.10 2000 1500 1000 3332 2237 3539 700 360 3010 1940 655 1700 1300 1680,5 1211 3600 6330
25.15.10 2500 1500 1000 3822 2237 3539 700 400 3510 1940 780 1950 1300 1680,5 1211 4000 8080
30.15.10 3000 1500 1000 4332 2237 3539 700 420 4010 1940 895 2220 1300 1680,5 1211 4000 9695
20.15.13 2000 1500 1300 3332 2237 4139 700 360 3010 1940 655 1700 1300 1680,5 1511 3600 6650
25.15.13 2500 1500 1300 3832 2237 4139 700 400 3510 1940 780 1950 1300 1680,5 1511 4000 8300
30.15.13 3000 1500 1300 4332 2237 4139 700 420 4010 1940 895 2220 1300 1680,5 1511 4000 9850
1) With REVO, Z measuring stroke is reduced by 48 mm
GENERAL DIMENSIONS
From 10.07.07 to 20.10.08
TOP view
From 15.10.09 to 30.15.13
TOP view
EAGLE.head m 7.5 PKJTM SP80PH10MQ REVO
105
90 90 90 90
145
105
175
59
quill
EN_Micro3DHA_20_Q4. Printed in Italy. MS-IX/2020
Specifications subject to change, due to the continuous improvement of the product.
Printed on recycled paper. Concept: Masterprint Text and design: Microservice.
PROBE HEADS
Mechanical frame Coordinate Measuring Machine, CNC type, with mobile bridge structure on granite table machine base
Sliding guideways X axis: dovetail, machined into the granite table.Y/Z axes: micromachined, anodized light alloy extrusion
Sliding elements Air bearings
Drive system Direct drive belt all axes
Length measuring system Free-moving linear transducers on carrier, resolution 0.1 µm
Controller Pantec EAGLETM / Renishaw® UCC
Protection degree: IP40 (IP54 upon request)
Cooling system: Fan
Surface Plate (part locking) Granite, threated inserts M8x1.25: flatness according to DIN 876/3
Vibration damping system 1) Passive elastometer vibration damping
OptionsAutomatic tip/tool changer, Automatic multisensor temperature compensation for T2 (16 °C to 26 °C), on top rotary table, manual and automated part loading system, active pneumatic vibration damping. 1)if requested, we will perform a vibration analysis.
TECHNICAL FEATURES
Humidity 40 % to 70 % UR (non condensing)
Operating Temperature From 15 °C to 35 °C
Acceptable Vibrations(Peak to Peak acceleration)30 mm/s2 from 1 to 10 Hz15 mm/s2 from 10 to 20 Hz50 mm/s2 from 20 to 100 Hz
ENVIRONMENT
Power Supply 1/N/PE 115/230 V~ ± 10 %; 50 / 60 Hz (± 4 %)
Max. power consumption 2,5 kVA
Typ. power consumption 0,6 kVA
Compressed air supply From 0,6 to 1,0 MPa, pre-cleaned
Operating Pressure ≤ 0,5 MPa
Consumption ≤ 250 Nl/min
Quality According ISO 8573 part 1: class 4
ELECTRIC AND COMPRESSED AIR SUPPLY
RegulationsMicro 3D HA complies with EC machine directive 2006/42/EC and EMC directive 2004/108/EEC
SAFETY
Disposal Microservice products and packaging returned to us are disposed of in accordance with applicable legal provisions.
Microservice SrlVia dei Ronchi, 45/L10091 Alpignano (TO) / Italy+39 011 [email protected]