convection microwave trim kit flush mount cabinet width 7 8" frame depth 20 11 16" minimum...
TRANSCRIPT
30"Cabinet Width
78 "
Frame Depth
201116 "
Minimum Depth
1918 "
CabinetOpening
1958 "
FrameHeight
729 8 "
Frame Width
PLANNING GUIDE TKCFP307
Convection Microwave Trim Kit Flush Mount
For replacement parts or if further help is needed concerning this appliance call:Toll Free 1 888 9 FNP USA (1 888 936 7872) or write to:
Fisher & Paykel Appliances Inc., 5900 Skylab Road, Huntington Beach, CA 92647or contact us through our web site: www.fisherpaykel.com
Minimum Depth
201116 "
FrameDepth
78 "
Distance from shelf to cutout
2116 "
Cutout Height
1578 " 1/8"
Cutout Width
251516 " 1/8"
Frame Width
2978 "
FrameHeight
1958 "
PLANNING GUIDE TKCFP307
Convection Microwave Trim Kit Surface Mount
For replacement parts or if further help is needed concerning this appliance call:Toll Free 1 888 9 FNP USA (1 888 936 7872) or write to:
Fisher & Paykel Appliances Inc., 5900 Skylab Road, Huntington Beach, CA 92647or contact us through our web site: www.fisherpaykel.com
Installation Instruction of Fan Box
for convection microwave trim kits
Important Information
1) After installing the runners, plug-in the 12VDC transformer
and place the cord along the right side of the cabinet.
2) Before peeling off the PVC coating from the stainless steel frame,
slide-in the Fan Box as shown in the image below. Plug-in the
12V supply and position the Fan Box approx. 1-1/2” to 2”-Inch set
back from the face of the microwave.
1-1/2” - 2”-Inch
(40mm - 50mm)
Fan Box
Microwave