contentsadvanced machines available for binding carpet samples. traditionally a sample binder (sb),...

2®

ContentsCarpet Binder, Heavy Duty (TPB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Bobbinless Sample and Cove/Wall Base Binder (SB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Multi-Strip Cove/Wall Base Cutter (NC-250). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Carpet Cove/Wall Base Winder (CBW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Sisal/Berber Binder (81200-S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Mitered Cornering Carpet Binder (81200-S & 81200-SM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Ultimate Cornering Carpet Binder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Carpet Sergers – Heavy Duty (81200 Serger Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Ultimate Cornering Serger (81200-AIR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Portable Serger (81200-PS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Serge Carpets on Jobsite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Carpet Sergers – High Speed (NC-252 & NC-860) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Carpet Fringer – Heavy Duty (FTW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Tapestry Binder (PBTT & TAP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Millennium Portable Carpet Binder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Portable Carpet Binders (PBT & PBS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Portable Binders (PBS & PBT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Carver Heads – Carpet Design School (467-BS-01 & 467-BS-02) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Air Driven Carpet Carver (PDC-3A1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Custom Carving Package & Training by Master Carver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Portable Beveler (Beveler) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Carpet Shear – Master Shear (GMS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Hand Shears (Hand Shears) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Carpet Cutters (RSWS & RSWSH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Portable Carpet Cutters (PNUC & PC-2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Cordless Carpet Cutter/Butane Glue Gun (NC-360 & CB-900K) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Tufting Gun (TG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25N-C Detailer “Hot Knife” (DT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Electric Hot Knife (EHK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Hot Wheel Pattern Tracer (PT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Netting Machines (860-N, 81200-TF, 81200-NTP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Netting Machine (81200-NTPB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Cove/Wall Base Cutters (NC-150) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Portable Bag Closer (P-3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Rug Braider (320-BR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Fringing Machine (220-F) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Glue Guns (AGG Series & GG Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Attachments (CA - PBCA - AM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30What is Serging Tape? (PS-439 7/8 ST & NC-10 7/8 ST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Online Ordering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Specialty 563 Machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33All New Sergers (860-KTF, 860-TF, 860-TFT, 860-LHTF). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Charts and Supplies: Sewing Softener, Carver Lube, etc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

3

Model TPB

®

Carpet Binder and FringerThe Original One-Step, Heavy-DutyBobbinless Zigzag Double Lockstitch

Binds carpet, top and bottom, in one operation

N-C: The originator of bobbinless one-step carpet bindingThe TPB bobbinless self-oiling carpet binder and fringer is widely used by many leading carpetmanufacturers for binding top and bottom in oneeasy operation. It accommodates light or heavy pile carpeting with any type backing including jute, latex, rubber back or scrimp.

The TPB is the N-C flagship machine. It is the mostcapable, maintenance free unit in the world.

PATENT #3320910

Features• Bobbinless, self-oiling• 34 feet per minute• Quick change attachments

Optional

• 1-1/4" Tape Folder• 3" Sisal Tape Folder• Cove/Wall Base Attachment• 7/8" Serge Tape Folder

TO ORDER COLOR CHARTS CALL US OR VISIT OUR WEBSITE AT WWW.N-CCARPET.COM

Twin power front andrear pullers evenly feedcarpets of any weight,any size, and any typebacking, eliminatingstress and strain. Compensating foot eliminates

carpet flagging during binding.Convenient snap-out binder plate for easy conversion and threading. Accommodatesrequired tape size in seconds.Also adaptable for snap-in fringe guide.

Binder guides accuratelyfold tape for automaticfeed and binding.

Adjustable tension bar fits tapes 3/4" to 1-1/4".

Separate extra-wide rearPower puller (top-andbottom-driven, with own clutch off handwheel)eliminates drive from main shaft or from feed lever.

Rear puller lift is located in front for easy accessibility.

Designed and Manufactured in the USA

4®

Model SBBobbinless Sample andCove/Wall Base Binder• Binds 60 feet/minute of carpet cove base

• Double lockstitch PATENT #3320910

• Model SB with cove/wall base attachment

• Feeds and binds lightweight or heavy pilecarpets (top and bottom) in one operation

The N-C Bobbinless Carpet Binders are the mostadvanced machines available for binding carpet samples. Traditionally a Sample Binder (SB), it is easilyconverted to a Cove/Wall Base Binder. The customizedadjustable cove base width guide installs in seconds,assuring an even feed. It can bind 3600 feet of carpetcove base per hour (60 feet per minute) effortlessly.

Carpet Cove/Wall BaseReplacing wood and rubber covemolding, matching strips of floorcarpet are bound and mounted as a baseboard, giving a rich, lavishlook, especially in long corridors.

Features• Pioneered and developed by N-C• Special cornering binder• Cove/Wall base adjustable guide• Built especially for sample departments• Automatic self-lubricating• Extra-wide feeder for better pulling• Binds 60 feet/minute of carpet cove base• Snap-out binder for easy threading

Optional

• 1-1/4" Tape Folder• Cove/Wall Base Attachment• 7/8" Serge Tape Folder

Optional Cove/Wall Base

Binder Attachment

Available for all N-C Carpet Binders

Model SBwith folder

(NC-10CRE) for binding

samples


ASK ABOUT AN AUTOMATED SB

5

Model NC-250

Model CBW

®


LEADER OF THE INDUSTRY WITH TOP-OF-THE-LINE COVE/WALL BASE BINDERS AND SERGERS

Multi-Strip Cove/Wall Base CutterThe NC-250 carpet cutter allows you to cut 6 fourinch strips in one pass. The blades are easilyadjustable and removable, thus allowing you to generate strips at a maximum of 24 inches. Above all else, your knees and back will thank you.

How the machine works:This portable cutter is on wheels and rolls rightalong your carpet roll. The NC250 is a walk behindunit designed to pull itself through the carpet. As anoperator, you simply butt the carpet up against theguide and turn on the blades. Once the blades catchthe carpet, it ensures exact cuts.

Carpet Cove/Wall Base WinderPre-cut cove/wall base strip is locked into the wheelhub. Large 30" lucite disks contain the cove/wall baseon the reel, which is motorized with a clutch to adjustspeed while winding the cove/wall base on the spool.The wound-up reel is easily removed for future binding.

Or, pre-cut cove/wall base can be fed into a bindingmachine. As it exits, it can be power-fed into thewinder, utilizing a separate foot pedal. The finishedbound reel of cove/wall base is easily removed, readyto take on location for installation. The winder has 120-foot capacity within its 30" clear plastic disks.

“Cut and Wind Cove Base in Minutes”

6®

Model 81200-S

Model 81200-SM

Sisal/Berber BinderThe 81200-S brings new meaning to the phrase“heavy duty.” It is the world’s most industrial carpetbinder. The 81200-S, A.K.A. “The Humvee,” wasdeveloped to combat tough sisals, Berbers, etc. Thisdouble puller, bobbinless machine is able to bindany carpet effortlessly. If your workroom is floodedby tough, thick-back carpets, the “S” is your bestoption.

• Binds 7/8" tape up to 7" tape.

• Twin independent driven front and rear pullers.

• Definite non-slip feeding.

• Bobbinless Chainlock stitch.

• The “S” is the Army Issued Humvee of offroadcarpet binding.

Mitered Cornering Carpet Binder• Same capabilities as the 81200-S shown above.

• The “SM” is a one-of-a-kind specialty machinethat miters carpet corners using N-C 3" tape and many other popular sizes.

• An air table is required for proper operation ofthis machine.

• Video shows simple demonstration on how tomiter corners.

• Performs all standard carpet binding applicationsin addition to mitering function.

7

Model BAC

®

Ultimate Cornering Carpet Binder*Designed for Special Applications

• Walking foot, chainlock stitch

• Designed to bind intricate turns and radiuses with ease

• Bobbinless, self-oiling, chainlock stitch

• Standard 1-1/4" attachment

• Positive, non slip feeding

• Available automated for sample mats

• Model: SBA-binds & cuts automatically

• Ultimate cornering technology

* Ask about an automated BAC

Ideal for: Hallway/Stairway Runners, Aircraft, Marine,Bathmat, Automats, RV, GSA, HB, rubber back, berbers.

Designed specifically for carpet binding applications thatencounter difficult inside corners, radiuses, and curves.

Initially designed for the automotive, aviation, marine, andbathmat industries, the BAC is utilized by carpet work-rooms worldwide.

If you encounter difficult carpet angles, the BAC is the perfect remedy.


*ASK ABOUT AN AUTOMATED BAC

Auto, Boat, Bath andHallway Runner Mats

Model BAC used in boat and car shops for

custom carpet trimming.

8®

Model 81200-TPWA/BCarpet Sergers 81200 SeriesHeavy-Duty for Serging on Any Heavyweight Carpet

Model 81200-TPWA/B

• Carpet Serger with Binder Attachment,Twin Puller and Wrap Around Serge

• Extra Heavy-Duty Serger withIndependently-Driven Rear-Mounted Twin Pullers for Wrap Around Serging Over Binding on Any Weight Carpet

Specially designed to simultaneously apply a tape underlay while wrapping around serging. Produces a tight, clean serge, eliminating the need to bevel or to serge-over two or three times. Carpet pile

will never come through your serge.

Features

• Carpet pile will never come through your serge

• Two-thread machine

• Completely covers up to 3/8" serge edge in one pass

• Rear pullers, top and bottom-driven for maximum,effortless non-slip feed

• Independent clutch system

• Clutch-driven direct from hand wheel; eliminatesstress and strain on main shaft and connections

• Large space between front and rear feed eliminatesshifting while carpet is being serged

• Minimizes operator fatigue; increases productivity,producing a quality job

Special Opportunity: Update your present equipmentN-C will convert your 81200-K, 812-K or NC-820K to aheavy-duty twin puller serger. (Due to special engineering,conversions can be performed only in our factory.)

81200 (Regular) or 81200-WA (Wrap Around)

Features• Completely covers up

to 3/8" serge edge• Definite no-slip feeding• Sturdy, heavy-duty

throat plate and feed

Model 81200-TP (TwinPuller) Same features as 81200

Features• Minimum needle

breakage, reduced maintenance

• Easily replaceable parts


9

Model 81200-AIR

®

Model 81200-AIR-RF

81200-AIR SeriesUltimate Cornering SergersThe 81200-AIR carpet serger is built on the lifelong lasting81200 class machine. All new technology allows you toserge those tough inside 90 degree angles, inside circles,and acute angles effortlessly.

Specifically designed with the aircraft, automat, andseacraft industries in mind, the AIR lends to all applica-tions. If your workroom encounters difficult carpets toserge, the new N-C Top Gun is your solution.

• Ultimate cornering technology

• Increased maneuverability up to 55%

• Set up on 2 or 3 threads

• Wrap around 3/8" Serged edge

• Single top and bottom feed

• Available with tape underlay so carpet pile never busts through

• Minimal maintenance

• Designed for multiple daily shifts

• Ideal for: Aircraft, seacraft, bathmat, rugs, runners,standard workroom, etc.

• Optional Tape Underlay Feature

The 81200-AIR-RF is designed for the standard carpetserging workroom. If you serge area rugs for the home,and are looking for a machine to tackle those tough cor-ners, you’ve just found it.

Designed with a “close couple” rear puller to handledense, room sized carpets, the 81200-AIR-RF is built onthe lifelong lasting 81200 class machine. All new tech-nology allows you to serge those tough inside 90 degreeangles, inside circles, and acute angles effortlessly.

• Complete with “Close Couple” Rear Clutch Driven Puller

• Features same as 81200-AIR

• Optional: Tape Underlay Feature

• Ideal for all Serging ApplicationsDesigned and Manufactured in the USA

10®

Model 81200-PSPortable SergerSerge on the JobsiteThe all new N-C Portable Serger will serge any weightcarpet. Designed and manufactured entirely in theUSA, the NCPS comes equipped with our special tapeunderlay feature. This tape feature ensures that car-pet pile never busts through the serge. Thus providinga perfect, long lasting finish.

With the N-C Portable Serger, now you can serge onthe jobsite and/or in house. This unit is the world’sonly heavy-duty portable serger. Patented.

The only portable serger that works on anyweight carpet:

• Machine pulls itself without operator help!

• Extra heavy-duty design

• Portable serger set up on large stabilizing rubber casters

• Carpet pile will never bust through your serge

• Two thread wrap around 3/8" serge.

• Top & Bottom Drive with close couple puller

• Ideal for serging oriental rugs, runners, sisals,berbers, etc.

• World renowned NC81200 mainframe

• Minimal maintenance

• Available 110 volt/60-cycle USA or 220 volt/50-cycle overseas


11

Serge all Carpets on the Jobsite

®

Serge any weight carpet on your workroom floor or on the jobsite.

Finished product: The industry’s most gorgeous wrap around carpet serge.


12®

Model NC-252

Model NC-860

Carpet SergersTwo-Thread Carpet Serger

The ultimate in high-speed overedging machines

This high performer is ideal for overedging carpets or rugs, blankets, jute or polypropylene bags, and any extra heavy materials. It is a self-oiler with fully automatic lubrication.

MODEL 252Right Hand Model (shown)

MODEL 252LLeft Hand Model

High-Speed Carpet Sergers Especially Designed For Medium to Lightweight Carpeting

Model 860 SergerFeatures

• Long-wearing with extra-heavy throat plate and feed

• Better feeding with extra-heavy balance wheel

• Ball-bearing handling plate. Material rolls in withoutpushing or pulling

• Accommodates most types of backed carpeting

• Automatic self-lubricating

• Optional rear puller

A powerful machine for serging all types of lightweightto medium-weight carpeting. With an extra-heavy balance wheel and ball-bearing handling plate,carpets feed in effortlessly.

Model 860-B Butt KingThis machine includes the features of Model 860, but is designed to tem-porarily join the butted edges of piecegoods for processing at bleaching,dyeing and printing factories.

Model 860 Trim KingIncludes all the features of Model860, but includes trimming knives,which permit the operator to feed,trim and serge simultaneously. Usedfor lightweight items such as bath-room mats and accessories.

Model 860 Left HandedThe same machine as Model 860, butdesigned to serge on the left side ofthe carpet. Using both Models 860and 860-LH, serging the right and leftsides of a carpet can be performedsimultaneously, cutting productiontime in half.

13

Model FTW

®

Bobbinless Carpet Fringer• Double lockstitch one-pass fringe and tape.

• Applies pre-made fringe in one operation.

The N-C Fringer cuts operation time and cost in half.You produce a durable, quality job while saving labor,time and money.

A precision-engineered compound feed eliminates“pucker” or “saucer” effects. Two needles and twoloopers guarantee maximum fringing security. Thefolder guide virtually eliminates operator handling,and a convenient swing-away guide makes finishingeffortless.

Features

• Effortless positive feeding

• Fringe guide rack

• Fringe folder guide

• Swing-away guide for easy finishing

• Automatic feed guide for finishing carpet underside with 9/16" tape

• Specially designed needle to penetrate carpet backing

• Automatic oiler

• Two needles/two loopers

• Compound feed


Apply Fringe in One Pass

14®

Model PBTT

Model TAP

Portable Tapestry BinderThe N-C Portable Tapestry Machine is the only truedouble puller, industrialized to handle dense carpets.The PBTT applies wide borders with a hidden stitch(blind stitch).

Tapestry edges have become prevalent in our industry.Demand for these gorgeous 3-6" tapestry borders hasgrown dramatically. Now you can perform tapestry jobsonsite.

• Applies up to a 6" border

• Independently driven double pullers

• Can perform mitered corners. Video available

• Can utilize any tapestry style tape: leather, cotton,vinyl, etc.

Tapestry BinderSews Up to 8" Tapestry Border

If you’re looking for the perfect machine to apply a variety of wide borders, you’ve just found it. The flag-ship N-C Tapestry machine is capable of applying an 8", blind stitch tapestry border. The TAP is bobbinless,self oiling, and requires minimal maintenance.

This unit allows you to perform hand mitered corners to your specifications (hand mitered corner video avail-able).

• Bobbinless, Self Oiling

• Applies to an 8" border

• Complete with table model work station

• Extra Heavy-Duty Design

• Can utilize any tapestry style tape: leather, cotton,vinyl, etc.

• Can mitre corners with this unit


15

Model MILLENNIUM

®

Bobbinless Portable Carpet BinderSo Advanced it Makes Other Portables ObsoleteThe Millennium is now the industry’s only machine with 4x4 technology. Powered by 3 independentlyclutch-driven pullers and front feeder, this portablebinder rivals the industrial strength of our table modelunits.

The Millennium is three times faster than conventionalbobbin type portables. So throw away your bobbins andbind 1000s of feet without changing thread. It isdesigned to dramatically increase your speed whiledecreasing your maintenance.

Patented.

Features

• 4 wheel drive, top and bottom feed (3 clutch-drivenpullers and 1 bottom feeder)

• Bobbinless, Twin Puller, Chainlock Stitch

• Uses 2 large spools of thread (throw away your bobbins)

• Push Button Oiling System

• Accommodates Serging Tape, 7/8", 1-1/4", and 3" binding

• Generates 23' per minute (1380' per hour) on Cove Base

• Binds any ROOM-SIZE carpet at a rate of 16' per minute

• Handwheel makes turning corners effortless

• Take Up Assembly (helps eliminate missed stitches)

• Extra Long Stabilizing Base gives you that“Cadillac” feel

• Instructional/maintenance Video

4x4 Design:3 Clutch-DrivenFeed Wheels +Feeder

Optional:Custom madewood protectivecase

16®

Series PBT & PBSPortable Carpet BindersFeed and bind top and bottom in one operation

Compact; completely self contained—weighs only 24 pounds

A completely portable carpet binder designed to perform afull-size job. N-C portable binders include built-in motor,roll-about wheels, and carrying case. They are lightweightfor easy transporting. The heavy-duty motor supplies thepower required to do a quality binding job on all types ofcarpets. Built-in casters are included for ease of operation.

PBT and PBS Features

• One-pass operation

• Binds all carpets and rugs

• Zigzag Lockstitch

• Binding holder accommodates full roll of binding tape

• Roll of binding tape fits against machine arm, eliminat-ing any extended obstruction when binding near wall

• Sews over four yards per minute

• A centrally located work handle maneuvers easily

• Pre-set stitch regulator and zigzag width eliminate prob-ability of breaking needles and upsetting feed timing

• Balance trigger handle switch with lock

• Built-in light/switch

• Fully enclosed heavy-duty motor

• Available in either 110/115V 60-cycle or 220/230V 50-cycle

Optional

• Fringe Guide (PBFG)

• Rug Glide (S28)

• 1-1/4" Folder

• Cove Base Attachment (PBCA)

• 3" Sisal Folder (PS439S) (factory conversion only)

• 7/8" Serge Tape Folder (PS439 7/8 ST)

Rug Glide Attachment for PBS & PBT Binding MachinesPart No. S28 (Optional)

Reduces drag; stabilizes feed. Attaches easily to base of binder.

Adjustable Cove/Wall Base Guide AttachmentPart No. PBCA (Optional)

Designed exclusively for N-C Portable binders.Attaches in seconds.

Comes complete with convenient

carrying case

17

Model PBS

®

Portable Binder with Single PullerFeeds top and bottom in one operation

Take it anywhere…..

Just plug in and use!

Portable Binder with Twin PullerN-C Original!

After years of extensive experimentation, N-C hasengineered an exciting breakthrough—a twin feedportable carpet binder that fully meets the demandsof carpet workrooms and installers.

Front- and rear-driven twin pullers, each with its ownclutch, eliminate back feed and lost forward motion.The secondary puller prevents the machine frompulling away from the rug.

Many more innovative engineering advantages arebuilt into this N-C twin puller portable carpet binder.

Model PBT


18®

Model 467-BS-01

Model 467-BS-02

Carver HeadsSuction tube on bottom for clear visibilitywhile carving away from operator

Features

• N-C Comfort Grip Design

• Lightweight carving heads

• Special rug-carving blade; easily removable forreturn to N-C for sharpening

• Heavier rocker arm

• Pivot pin and drive cable

Suction tube on top for clear visibility while carvingtowards operator

Complete Rug Carver Unit• Vacuum tank and hose

• Motor with variable speed control on swivel base

• Drive cable

• Electric outlet

• Swivel Carver head

• Available in 110/115V 60-cycle or 220/230V 50-cycle

• Replacement blades for all carvers

CARPET DESIGN SCHOOL

A new dimension for carpet workrooms

CUSTOM CARPET CARVING, IN-LAYS AND SCULPTING TRAINING

Attain knowledge in becoming a specialist in custom carpet designing. In as little as three days of

schooling, you will learn pattern making and methods;fabrication of carpet; trade secrets of carving and

sculpting; rebacking with different materials, bindingmethods; equipment purchasing and maintenance;marketing of your talents and pricing your work.

Shown with 467-BS-01Clipper Head


19

Model PDC-3A1

®

N-C Air-Driven Carpet Carver

No WiresNo Cable to BreakNo Brushes to Wear OutNo Tank to Carry• N-C Comfort Grip Design

• Controlled air flow keeps unit andblades cool, prolonging blade life

• Blades change easily in seconds

• Safety grip switch shuts off unit automatically

• Super-quiet operation

• Weighs only 1-1/2 lbs. with blade

• Built in air exhaust

The Ultimate Carpet Carver for Sculpting and InlaysDesigned to operate multiple daily shifts, the PDC-3A1 is utilized by large mills & individual carvers looking formaintenance free production. This unit is totally enclosed with a built-in power unit and ball bearing direct drivefor low air pressure operation.

It broadens the capabilities in the art of sculpting designs in carpets as well as creating decorative border pat-terns. The air-cooled, lightweight powerhead is easier to use; more maneuverable; more responsive to intricatemanipulations—the ultimate finishing tool for inlaid carpet creations.

The PDC-3A1 carpet carver is air-driven, requiring only 60 PSI to operate. It has no cable, no exterior motor, nowires, and no brushes, making it virtually maintenance-free.

Carver Base-Relief PlateUsed with air-driven or electriccarvers. Locks in carver at any angleor height for controlled relief carving.

Part No. CB

Mini KitIn-line lubricator, water trap filter and air gauge regulator.

Gauge reading 0-160 PSI

To drive N-C air carver, use minimum 60 PSI

Part No. KIT

Patented


20®

Standard Custom Carving Package and One-on-One Training Performed by Master Carver

A. Carver (Elec./Air) B. Beveler C. Glue Gun

D. Portable Carpet Binder E. Detailer

“Your creativity is your best tool”Call for start-up custom carving package

CONTACT US FOR SCHOOLING DETAILS • 1-800-526-1184

21

Model BEVELER

®

Model GMS

Model HAND SHEARS

• Bevels Edges for Custom

Inlays or Borders

• Bevels Edges for Binding

• Will Cut 30° to 90° Angles

Portable BevelerShear those thick piled carpets on exact height and angleThis machine, designed for beveling carpet edges, is areal time-saver for both manufacturers and retailers.

Made of lightweight aluminum, the N-C Beveler ismounted on needle-bearing rollers assuring easy handling. So simple to operate that an inexperiencedperson could bevel a room-size rug in 5 or 10 minutes.

Features

• Different bevel angles may be obtained by loosening the two knobs at the base of the machine and moving the cutting head to a desired position. Will cut 30°to 90° angles.

• Fine tool steel knives are easily removable for sharpening

• 1/2 HP engine

• Available in either 110V/115V 60-cycle or 220/230V 50-cycle

• Optional extra: quiet, long life vacuum

Top-of-the-line Carpet Shear“Master Shear”Made in Germany, Master Finish is infinitely adjustable to accom-modate any carpet pile. Gives a “like new” look to carpets rendered uneven and unsightly through wear, shampooing, ormovement of furnishings. Electrically-driven with either 110V or220V single-phase alternating current motor. Shearing depth iseasily adjusted to any desired height. Weighs just 22 lbs. (11 kg).

Portable Hand ShearsThe N-C Portable Hand Shear trims carpet borders to anydesired width for fringing. Includes powerful, cool-runningmotor, extra long-lift brushes, and easily-cleaned filterscreen. Available in either 110V or 220V.

HEAVY DUTY Model EW311Rough cut used for beveling

LIGHTWEIGHT Model 510Fine cut is used for shearing and finishingModel 510: Fixed speed


EW311 510

22®

Model RSWS

Model RSWSH

Hand Model Carpet CutterThis carpet cutter has an ultra slim-line standard for effort-less cutting. Only N-C’s Ultra Slim-Line Carpet Cutter permitsthe blade to glide through any weight carpet, with any typebacking (especially high-density rubber), smoothly and withlittle resistance.

Features

• 3/4 HP motor

• Directly wired with twist-lock plug, eliminating constantterminal pin breakage

• Eliminates thick rug resistance

• No bucking. Operator makes straight, accurate cutsthrough heavy material

• 6" blade for longer-lasting blade life

• Sealed motor bearings for virtually grease-free operation

• All controls within fingertip reach


Upright Carpet CutterThe Ultra Slim-LineThis upright 6" floor cutter contains all thefeatures of the RSWS with the convenienceof a long handle with finger tip switch.

Set up a track and cut any carpet with easeand precision cuts.



23

Model PNUC

Model PC-2

®

Pneumatic Air CutterMost powerful hand held cutter in the world.Pneumatic, heavy-duty, portable cutter just slicesthrough any carpet and backing type. The cutterweighs a mere 2-1/2 pounds, thus minimizing oper-ator fatigue.

• Built in muffler assures quiet operation

• Operates 100 PSI

• Maintains RPM without slowing

Electric Driven Carpet CutterN-C’s compact cutter weighs less than 5 pounds, and cutsany weight carpet with all types of backing or padding. Cutsstraight or slight curves quickly and accurately, saving time,money and labor.

Its ease of handling makes this a perfect tool in the mill or foron-the-job installation.

The Portable Carpet Cutter is equipped with extra blade,sharpening stone, lint brush, and tube of lubricant.

Features

• Die-cast motor housing

• Finger-grip die-cast handle

• Lightweight (approx. 5 pounds)

• Heavy-duty motor

• Automatic sharpener

• Fingertip on/off switch

• Adjustable pile guide


Portable Carpet Cutters


24®

Model NC-360

Model CB-900K

Cordless Carpet CutterComplete with heavy duty NiCad battery pack and temperature controlled quickcharge charger

NC-360-01 10 sided round knife 60mm (2-5/16") dia

NC-360-02 Counter knife (carbide tipped) assembly

NC-360-03 NiCad battery pack (9.6 VDC)

NC-360-04-1 Battery charger 115V

NC-360-04-2 Battery charger 230V

NC-360-05 Sharpening stone

Cordless Butane Glue Gun• Complete with carrying case,

4 applicator tips and glue sticks

• Take everywhere with your Portable Binder and Cordless Cutter

• Wide Tip and Glue Available

Cut and Glue YOUR Carpets Cordless!

25

Model TG

Model DT

Model PT & EHK

®

Tufting GunPrecision, high-speed, lightweight, versatile, and maneuver-able are just a few words to describe this engineering mar-vel which virtually out-dates all other tufting machines.

Hand-tufted carpets can be produced at unbelievablespeeds with utmost accuracy. Limited only by imagination,carpets can be created in various heights, in either cut orloop pile of light, heavy, or unconventional yarns.

With complete maneuverability, tufting can be in any direc-tion including working in line, twisted movements, or circu-lar work of 360° without removing the cut from the canvas.

Features

• Lightweight, including motor• Self-sharpening cutting blade• Up to 2050 stitches/rpm• Changes from cut to loop pile in seconds• Disassembles and reassembles in minutes• Complete maneuverability• Pile heights: Cut: 16-40mm Loop: 8-40mm• Available in 110V 60-cycle or 220V/230V 50-cycle

Electric Hot KnifeFor intricatedesign-cuttingon synthetic-backed carpets

Hot Wheel Pattern TracerFor perforatingpatterns anddesigns ondurable Tyvek sheetfor CustomCarpeting

N-C Detailer “Hot Knife”Used primarily for custom inlays, the detailer literally glidesthrough the synthetic backing of most carpets as the “hotknife” cuts intricate patterns and designs. Also used torepair carpet by “fusing” seams together.

• Comes with razor tip F• Optional Tips PS, E, H• Available in 110V 60-cycle or 220V/230V 50-cycle


26®

Model 81200-NTP

Model 81200-TF

Model 860-N

New N-C Netting MachinesAll New Ultra Heavy DutyNetting/Rope Machine SergerFeatures

• Netting Sewn Parallel or Diagonal to the edge.Maximum S.P.I. is 2.5" (10mm)

• Stitches 1,200 per minute

• No machine in the world has its rope capacity, does up to 1-1/16" (26mm) diameter rope

• Twin Puller System with Independently Driven Clutch

• No Slippage

• Minimum Maintenance

All New Heavy Duty Netting SergerFeatures

• Unique Top Roller Feed for Serging all Ends

• Made Specifically for Netting Industry

• Variable Speed Feed Roller System

• No Slippage


All New High Speed Serger for Light to Medium Weight NettingFeatures

• Automatic Self-Oiler

• Made Specifically for Netting Industry

• High Speed Top & Bottom Feed

• Variable Speed Feed System

• No Slippage





27

Model 81200-NTPB

Model NC-150

®

Carpet Cove/Wall BaseCuttersSingle-Strip Cove/Base CuttersThis single high-speed cove base cutter is ideal foron-the-job installations. High speed cutting capacityproduces accurate strip widths (up to 6") ready forbinding. Circular self-sharpening cutting blade oper-ates on 110 or 220 Volts. Completely portable witha carrying case makes it the ideal on-the-jobcove/wall base cutter.

Carpet cove/wall base is the popular choice toreplace vinyl and wood cove/wall base. Often left-over strips of carpet can be used to cut into 4" to6" cove-size strips. Using an N-C binder to finish offthe visible raw edge, this type of cove/wall basecomplements wall-to-wall installations.

WEIGHT: 38 LBS

The 81200-NTPB is capable of binding around anynetting while inserting rope at the same time.Needless to say, it is also able to bind netting thatalready has the rope attached.

N-C offers a single needle chainlock with top andbottom rear puller including a close couple top rollerfeed puller with the ability to utilize binding up to 7" in diameter.

N-C offers the most powerful quality built heavy-duty netting binder in the world.


28®

Model P-3

Model 320-BR

Model 220-F

Portable Bag CloserOne thread, one needle, one looper; chain stitch

The N-C Portable Bag Closer is used primarily in carpetfinishing departments to seam jute and poly-back; alsoideal for seaming very low pile material.

Features

• Weighs only 14 lbs.• Compact; stores anywhere• Sturdy construction• Simple to use• V-Belt drive• Quiet operation• Available in 110V/115V 60-cycle, or 220V/230V 50-cycle

Rug BraiderOne thread, one needle, one looper; chain stitch

The N-C 320-BR is our heavy-duty zigzag lockstitchmachine engineered for braiding rugs of any size. Not aconversion of an old machine, but brand new, customizedespecially for braiding rugs.

The 320-BR offers a wide selection of presser-foot sizes.It accommodates different size ropes, and uses prewoundStyle F bobbins.

Features

• Zigzag lockstitch• Pre-wound “F” bobbins with 111 yards of thread• Available in 110V 60-cycle, 220V/230V 50-cycle• Specially designed needle for easier penetration

Fringing MachineHigh-speed operation makes fringing from a single spool of yarn,sews it on, and trims to size, all in one operation. This sophisticat-ed equipment creates fringing in lengths 1-1/2" to 5" (4cm to12cm), 13 to 35 fringes per 4" (10cm) at up to 1000 s.p.m.Designed for fringing on woven or non-woven materials—tuftedcarpets, praying mats, table cloths, bed covers, shawls, blankets,sunblinds, etc. Fully automatic lubrication.

• Available in 110V 60-cycle or 220V/230C 50-cycle• Spins Authentic Fringe

29

Series AGG

Series GG

®

Glue Guns(Wide Tip Included)

CARPET CLAMPSVarious Applications

ICE PICKSTo position carpet while seaming or cutting

GLUE GUN WIDE TIP ACCESSORIESUsed to apply hot melt gluein wide areas

Part No. WT Part No. ICE Part No. CC

AccessoriesGLUE PLUGS & STICKS

For seaming and glue guns Plugs: PART NO S30(22 pounds per carton)

Sticks: PART NO S30L(22 pounds per carton)

SCRIM

Specially formulated poly-mesh tacky seaming tape in300' rolls. Available in 1", 2"4", 6" and 12" widths. Largersizes on special order.

When ordering, please specify:

Model AGG/Plugs (Air-driven, uses glue plugs)Model GG/Plugs (Electric, uses glue plugs)

When ordering, please specify:

Model AGG/Sticks (Air-driven, uses glue sticks)Model GG/Sticks (Electric, uses glue sticks)

Air-Driven Glue GunFor gluing and seaming large areas or for continuoususage, the glue gun is easy to load and keep opera-tive. The air-driven squeeze trigger eases applicationby eliminating operator fatigue, allowing tasks to beperformed faster and more efficiently. Equipped withan insert stand; operates on 120V. Air compressorrequirements: Minimum 50 PSI; maximum 100 PSI.

Electric Glue GunUsed to apply hot melt glue for repair and seaming alltypes of carpet. Equipped with holder stand.


30®

ATTACHMENTS

NC-10 REPNS/NC-10 CRENSN-C’s engineering department has developed a new style poly-binding attachment. These speciallydesigned attachments eliminate puckering or waver-ing. These attachments are designed for all highspeed industrial binding machines in sample houses,carpet workrooms or custom area rug departments.

3" Sisal AttachmentUniversal 3" sisal attachments that accommodate polyester and cotton tape. These 3" sisal bindingattachments are available in raw edge or clean finish.All N-C equipment has the ability to accommodate the3" sisal attachments. Simply specify which modelbinder you have.

Adjustable cove base (wall base) attachments for allindustrial binding machines adjustable from 3 to 6".

Adjustable Cove BaseAttachment (4-6") for New Bobbinless N-CMillennium Portable

Adjustable cove base attachment for all portables withbobbins.


CA PBCA

AM

31

SERGING TAPE

®

PS-439 7/8 STFor all Portable Binders

NC-10 7/8 STFor all Table Model Binders

When it comes to quality and innovation in carpet binding, serging,fringing, cutting, beveling or carving machinery, there is only one:

N-C Carpet Binding and Equipment Corp.

Serging tape duplicates the look of wrap-around serging. It can be applied with any carpet bindingmachine. It is made out of 100% cotton and looks gorgeous. Merely purchase a folder for your binderand you are ready to serge.

We carry 84 colors of serging tape. Simply ask for our color chart or look it up on our website atwww.n-ccarpet.com.


What is Serging Tape?

32®

www.n-ccarpet.com• Easy online ordering (Paypal or House Acct.)• View all color charts online

150 Polyester Binding ColorsAvailable in 3/4" & 1-1/4"

59 3" Sisal Cotton & PolyesterColors Available

126 Serging Yarn Colors &84 Serging Tape Colors Available

47 Cotton Binding Colors Availablein 3/4" & 1-1/4"

29 Oriental & Synthetic FringeColors & Styles

• All N-C Machinery described in detail• Don’t miss out on the ALL-NEW “N-C Portable Serger”

“World’s Largest Online Store for Carpet Binding Tapes,Serging Yarns, & Fringes”

N-C MACHINE REPAIR SERVICE: WE REPAIR ALL N-C UNITS WITHIN 24 HOURS.MAKE SURE TO SHIP YOUR MACHINES WELL PACKED.


33

Model 563-N

Model 563-B

Model 563-T

®

MODEL 563-BHeavy-duty lockstitch, large bobbin hook, com-pound feed, reverse backtacking lever. Bindscarpet top and bottom in one operation. Uses 1-1/4" binder. Special binders made to order.Available without binder.

Ideal for auto mats, carpet samples, canvas andleather items.

MODEL 563-T WITH GUIDEFOR TAPESTRY BINDINGAll the features of the 563-B, but replaces thecarpet binder with an adjustable tapestry bind-ing guide.

For details on tapestry binding, refer to ModelTAP on page 14.

MODEL 563-N

Rubber Nosing MachineThis portable unit applies rubber nosing to anyapplication. It can be brought on the jobsite orutilized in house.

Specialty 563 Machines

34®

Model 860-KTF

Model 860-TF

Model 860-TFT

Model 860-LHTF

High speed self oiling top roller feed serger with trim knives.Especially effective on all rubber-backed mats and carpets. This unithas its own independent variable speed clutch system and eliminatesall slippage, minimizing maintenance.

• Commercial, medium, light weight carpet, rubber back• Available in wrap-around or regular stitch.

High speed self oiling serger with upper roller feed. Effective on allmedium to light weight carpets. This unit has its own independentvariable speed clutch system and eliminates all slippage, minimizingmaintenance.


High speed, self oiling serger with upper roller feed and tape attach-ment. This unit applies binding before serging. This results in a perfectfinish by eliminating all carpet pile from view.


Left handed high speed, self oiling serger with upper roller feed. Thisunit has its own independent variable speed clutch system and elimi-nates all slippage, minimizing maintenance.

• Available in regular stitch only.

“All New” N-C Sergers (patents pending)

860-KTF

860-TF

860-TFT

860-LHTF

35

Supplies & Equipment Available from N-C

®

• Serging thread• Knotted acrylic 4" fringe• “A” and “F” pre-wound bobbins• 8 oz spools mono-thread for Portable

Binder• 52 oz mono-thread—approx. 1-1/2 lbs

canister• 24/4 thread for looper• Bonded nylon thread• 12/4 thread for looper• 16/4 thread for looper• BT-207 wrap-around thread• N-C sewing softener• Carver blade lubricant• 3/4", 7/8" 1-1/4", and 3" binding tapes

in polyester or cotton• Silicone spray• Industrial machine oil• Full line of replacement parts for N-C

and other make binders and sergers• Wiss carpet shears • Tweezers: Curved and straight• Silicone: pints, quarts, gallons• Needles: all types• 10" and 12" carpet shears• RS-1 napping shears• Sisal tapes:

3" cotton tapes3" polyester tapes


Carpet Fringe—Regular

Sample Charts

Colorfast Poly Tape

Cotton Carpet Binding

Sisal Tape

Serging Thread & Tape

SEWING SOFTENERPints . . . Part No. S13Gallons. . Part No. S35

CARVER LUBEAerosol . . . . . Part No. S14Pints Cans. . . Part No. S14A

QUIK STIX SPRAY ADHESIVE

Spray adhesivefor carpet repairs,secondary back-

ing and inlays.Part No. QS100

ORIENTAL FRINGE

We currently offer 12 styles/colors toselect from. Our goal is to provide thefinest oriental style fringe at affordablepricing. Call toll free to order a free colorchart. In addition, matching colored serg-ing yarn is also available. This comes inhandy when attempting to serge andfringe complete rugs.

In Our Fourth GenerationFamily owned and operated for more than 60 years, N-C Carpet Binding & Equipment Corp. andNewark Caplan Sewing Machine have pioneered, designed, and engineered numerous innovationsutilizing industrial sewing machines.

Family members A. Joseph Caplan and Maliad Maher started the business after service in the mili-tary. Maher became the expert in setting up entire garment factories with equipment required tomanufacture clothing.

Caplan branched out in the development of special sewing machines for the carpet industry. He iscredited with developing the first bobbinless, zig-zag, double chainlock stitch machine to tape andbind carpets, top and bottom, in one operation.

Mel Maher and Mark Caplan have spearheaded the development of the industry’s bobbinlessportable carpet binder and the all new portable serger. In addition, their efforts have led N-C intodeveloping custom machinery for dozens of industries.

The most recent addition to management is Mel’s son Mal Maher. Mal recently received an MBA ininternational management and marketing. He directs international accounts, website design, andmarketing efforts.

Value StatementHere at N-C we take pride in being the industry innovator. Since 1959, we have pioneered the floor-ing trade with new equipment. We strive to continue developing new, innovative equipment. N-C differentiates itself from others by designing and manufacturing our own equipment. While othersduplicate, we originate. We welcome you to join our family of advanced machinery.

N-C Carpet Binding & Equipment Corp.

858 Summer Avenue • Newark, New Jersey 07104

973-481-3500 • 1-800-526-1184 • From Canada: 1-800-336-1184 • Fax: 973-481-0839

www.n-ccarpet.com • [email protected]

PMS 641

®

PMS 641

®

is a registered trademark of N-C Carpet Binding & Equipment Corp.

Company History & Value Statement

contentsadvanced machines available for binding carpet samples. traditionally a sample binder (sb),...

Documents