contentenergy-21.ru/files/misc/catalog2020en.pdf tel/fax: ( 51) 66 -24-60, 66 -26-75, 66 -24-92,...
TRANSCRIPT
AO «ENERGY +21»10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
�
Content
About the company .......................................................................................................... 6Contacts ............................................................................................................................ 9
Part I. Composite suspension insulators for TL ............................................................. 10
Part II. Bird protection device for composite suspension insulators ........................... �0
Part III. Composite pin insulators .................................................................................... �2
Part IV. Composite line post insulators ........................................................................... �6
Part V. Composite interphase insulating spacers ......................................................... 54
Part VI. Composite post insulators .................................................................................. 60
Part VII. Composite bus support .................................................................................... 102
Part VIII. Composite bushings ........................................................................................ 116
Part IX. Composite pin insulators for traction lines ..................................................... 122
Part X. Composite pin bird-protected insulators for traction lines ........................... 140
Part XI. Line fittings .......................................................................................................... 162
1*
WWW.ENERGY-21.RUTel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
4 AO «ENERGY +21»10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
5
WWW.ENERGY-21.RUTel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
6 AO «ENERGY +21»10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
7
About the company AO «Energia+21» was founded in 1993 as specialized polymeric insulator pro-
duction enterprise. Engineering development methods as well as technological pro-cess of Siberian Scientific Research Institute of Power Engineering, Novosibirsk,
became the basis for production of the first insulators. At the very beginning, the company produced only
three types of 70 kN insulators for 35, 110 and 220 kV.Today the range of produced insulators is largely in-
creased. It includes:• line suspension insulators (for power transmission
line from 10 kV up to and including 500 kV);• line post and pin insulators (for 10–35 kV);• post insulators (for 10÷220 kV voltage);• bushing insulators (for 10 kV);• pin insulators, for railway overhead constructions;• pin bird-protected insulators, for railway overhead
constructions;• interphase and insulating spacers.
All produced insulators are made of silicone rubber of high quality and have solid-cast ribbing.
Taking into account all kinds of connections for various voltage classes; loads 70, 120, 160, 210 kN; and levels of atmosphere pollution, the enterprise produces more than 120 types of line suspension insulators and cap-and-pin polymer insula-tors, more than 40 types of support insulators, and more than 30 types of railway insulators.
During 25 years of operational service of insulators produced by AO «Ener-gia+21», there are no records of insulator puncture, or its failure because of design or technological process reasons. The specialists of the company maintain business contacts with the customers and take their suggestions and requests with sensitivity. With due consideration to the opin-ion of consumers, the insulator design is permanent-ly modified that improves its technical characteris-tics, reliability and service life.
The company purposefully takes measures to searching for materials of higher quality with the fol-lowing replacement of employed materials.
Fiberglass, rubber compound, and materials for connection fittings enter the production with im-proved characteristics.
For dynamic consumer needs response the ma-jor part of connection fittings is produced in specially designed forging workshop. Moreover, in 2004 the
metal fittings hot galvanizing workshop was put into operation, along with the quality control laboratory of insulators, purchased materials and compounds. All these measures were taken for improvement of quality and reliability of products.
The quality management system established in the company is certified in accordance with the interna-tional standard ISO 9001.
AO «ENERGIA+21» effectively cooperates with design institutes, scientific research and test centres: research centre FSUE «RFNC-VNIITF», Moscow, «VNIIEM Corporation» JSC, Moscow, and «High Volt-age Direct Current Power Transmission Research In-stitute» JSC, St. Petersburg.
The products of AO «Energia+21» are certified by ENERGOSERT and ENSER-TIKO Associations, as well as by the System of Certification on the Federal Railway Transport.
Moreover, AO «Energia+21» is a constant par-ticipant of different exhibitions (primarily, special-ized power engineering exhibitions).
Due to high quality and novelty of goods, the company has been awarded multiple certificates and medals. According to the results of 2004, AO «Energia+21» was included in the Best People in Russia encyclopedia as the reliable business partner.
Also, the International Academy of Real Econo-my named the company «The enterprise of the year» in the nomination «Effective business technology», while the General Director Salov Oleg Veniaminovich was named «The man of the year».
During its development, AO «Energia+21» realized the high level of its respon-sibility for output products which have the immediate influence on stable operation of power transmission, and, as a result, provide the energy security of Russia. Thus, these factors encourage the company within a short time to apply new types of insulators and fit-tings, steadily improve the output goods, and expand its capacity. Moreover, the enterprise continues to found new work centres, and provide permanent development and growth of professional skills of the whole staff.
WWW.ENERGY-21.RUTel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
� AO «ENERGY +21»10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
9
Management staff of AO «ENERGY+21» thank the directors of electric-ity companies (1993–1995 ) provided the help with organization and forma-tion of our factory.
• «Tumenenergo»General Director – Valentin Bogan Chief engineer – Victor VasilyevDeputy Chief engineer – Lev Peutin
• PАО «Chelyabenergo»General Director – Yuri Gusikhin
• PАО «Permenergo»General Director – Yuri Lapin
• PАО «Bashkirenergo»General Director – Vladimir KrainovDeputy General Director – Valentin Alexandrov
• ОАО «YuAIZ»General Director – Vladimir OsipovChief engineer – Vladimir Golovin
• Sibirsky Energy Research Institute Deputy General Director on science – Valery Chunchin Leading specialist – Mikhail Romanov
Contacts:
AO «ENERGY+21»10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russiatel./fax: (351) 663-24-60, 344-06-54, 344-61-88
INN 7424004347, KPP 742401001.
Settlement account: 40702810007520000122 in PАО «Chelindbank», Chely-abinsk. BIC 047501711, corr./account 30101810400000000711.Code OKPO 21639232.
General Director – Oleg SALOV
tel.: (351) 211-60-10, 663-24-92
Deputy General Director – Alexander PETERIMOV
tel.: (351) 211-60-20
Chief engineer – Anatoly IVANISENKO
tel.: (351) 211-60-10, 663-24-92Chief accountant –
Natalia BREDIKHINA tel.: (351)663-24-92
Sales Department: tel.: (351) 211-60-20, 663-24-60
Engineering Department:tel.: (351) 211-60-10, 663-24-92
Purchasing Department: tel.: (351) 211-60-30, 663-26-75
Accounts Department:tel.: (351) 663-24-92
WWW.ENERGY-21.RU 10Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»1110, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part I.Composite suspension
insulators for transmission linesComposite line insulators are accepted by The Research &
Design Center for Power Engineering (RDCPE) and recommended for application in the projects of RDCPE
General scope (application):Polymeric line insulators are intended for insulation and fixture of the conduc-
tors in the power transmission lines and bus arrangement of the switchgears of AC power stations and substations with voltage of 10–500 kV and frequency up to 100 Hz in the condition with various level of pollution. The climatic modification of the insulators is UHL and the category of disposing is 1 in accordance with Russian GOST 15150. The insulators are operated at maximum operating temperatures from -60°C to +50°C and installation at altitude no more than 1000 m above sea level.
Reference designation of insulators(classification):
L К 70 / 110 – 2 GPSP, SS, GP, GS– insulator modification index
1-4 … – maximum level of pollution acc.PUE edition 7, item. 1.9, СТО 56947007-29.240.068-2011
10–500 – nominal voltage of TL in kV
70–210 – specified mechanical failing load in kNК – material of protective coating of insulating part: silicon rubber
L – type of insulator : suspension line unit
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
Example of reference designation
Insulator LK 70/110-2SP – composite line suspension unit with pro-tective ribbed capsule made from silicon rubber, grade 70/110 on nominal voltage 110 kV, modification SP, for operation in areas with the pollution of the 2nd category.
Insulators are manufactured in different modifications:«SP (СП)», «SS (СС)»,«GP (ГП)», «GS (ГС)»
Line Coupling dimensions
ØD Ød Ød1 B b b1 b2 a a1
7-to
n
33,3-1,5 17+1,2+0,3
17-1,2 16+0,9-1,1
13,4-1,3 19,2+1,6 34,5+1,5 14,5+1,6-1,6
20,5+1,5
12-to
n
33,3-1,5 23+1,5+0,2
17-1,2 22+0,9-1,3
13,4-1,3 19,2+1,6 34,5+1,5 14,5+1,6-1,6
20,5+1,5
16-to
n
41-1,6 26+1,5+0,2
21-1,3 25+0,9-1,3
19,5-1,4 23+2,1 42,5+1,5 20,5+2,1 29,3+1,5
21-to
n
41-1,6 29+1,5+0,2
21-1,3 28+0,9-1,3
19,5-1,4 23+2,1 42,5+1,5 20,5+2,1 29,3+1,5
WWW.ENERGY-21.RU 12Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»1�10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Coupling link of line fitting:Double socket ball 2У-12-16
“SP” Tongue-Ball “SS” Tongue-Tongue
“GP” Socket-Ball “GS” Socket-Tongue
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
WWW.ENERGY-21.RU 14Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»1510, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Characteristics
LK 7
0/10
-2SP
UH
L1
LK 7
0/10
-�SP
UH
L1
LK 7
0/10
-4SP
UH
L1
LK 7
0/20
-2SP
UH
L1
LK 7
0/20
-�SP
UH
L1
LK 7
0/20
-4SP
UH
L1
Nominal voltage, kV 10 20
Mechanical tensile failing load, not less kN 70
Spacing Н, mm 311 392 446 554
Length of insulating part L, mm 227 308 362 470
Leakage distance, сm 31 36 43 64 69 84
Coupling dimensions
B 16 +0,9-1,1
Ød 17 +1,2+0,3
ØD 33,3-1,5
Ød1 17-1,2
b 13,4-1,3
Weight, not more, kg 1,0 1,2 1,3 1,4
Pollution level (PL) acc. to STO 56947007-29.240.068-2011 (Publ.7, Cl. 1.9,)
2 3 4 2 3 4
50% power frequency discharge voltage in wet and polluted conditions, not less, kV 25
Power frequency withstand voltage:– dry, kV– under rain, kV
90 60
9570
Withstand voltage lightning impulse, not less, kV 170 180
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
WWW.ENERGY-21.RU 16Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»1710, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Characteristics
LK 7
0/�5
-2SP
UH
L1
LK 7
0/�5
-�SP
UH
L1
LK 1
20/�
5-�S
P U
HL1
LK 7
0/�5
-4SP
UH
L1
LK 1
20/�
5-4S
P U
HL1
Nominal voltage, kV 35
Mechanical tensile failing load, not less kN 70 120 70 120
Spacing Н, mm 640 740 778 878
Length of insulating part L, mm 440 578
Leakage distance, сm 106 116 140
Coupling dimensions
B 16 +0,9-1,1 22 +0,9
-1,3 16 +0,9-1,1 22 +0,9
-1,3
Ød 17 +1,2+0,3 23 +1,5
+0,2 17 +1,2+0,3 23 +1,5
+0,2
ØD 33,3-1,5
Ød1 17-1,2
b 13,4-1,3
Weight, not more, kg 1,9 2 3,2 2,4 3,6
Pollution level (PL) acc. to STO 56947007-29.240.068-2011 (Publ.7, Cl. 1.9,)
2 3 4
50% power frequency discharge voltage in wet and polluted conditions, not less, kV 53
Power frequency withstand voltage:– dry, kV– under rain, kV
160140
Withstand voltage lightning impulse, not less, kV 295
2 За
к. 2
130
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
WWW.ENERGY-21.RU 1�Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»1910, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Characteristics
LK 7
0/11
-2SP
U
HL1
LK 1
20/1
10-2
SPU
HL1
LK 7
0/11
0-�S
PU
HL1
LK 1
20/1
10-�
SPU
HL1
LK 7
0/11
0-4S
PU
HL1
LK 1
20/1
10-4
SPU
HL1
Nominal voltage, kV 110
Mechanical tensile failing load, not less kN 70 120 70 120 70 120
Spacing Н, mm 1280 1388 1441 1541 1594 1694
Length of insulating part L, mm 1034 1042 1195 1348
Leakage distance, сm 252 263 316 390
Coupling dimensions
B 16 +0,9-1,1 22 +0,9
-1,3 16 +0,9-1,1 22 +0,9
-1,3 16 +0,9-1,1 22 +0,9
-1,3
Ød 17 +1,2+0,3 23 +1,5
+0,2 17 +1,2+0,3 23 +1,5
+0,2 17 +1,2+0,3 23 +1,5
+0,2
ØD 33,3-1,5
Ød1 17-1,2
b 13,4-1,3
Screen diameter, mmØdv (upper) 135
Ødn (bottom) 135
Weight, not more, kg 3,5 3,8 4,4 5,0 6,0 6,4
Pollution level (PL) acc. to STO 56947007-29.240.068-2011 (Publ.7, Cl. 1.9,)
2 3 4
50% power frequency discharge voltage in wet and polluted conditions, not less, kV 160
Power frequency withstand voltage:– dry, kV– under rain, kV
340325
340325
Withstand voltage lightning impulse, not less, kV 550 550
Fig. No. 1 22*
Fig. 1 Fig. 2
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
WWW.ENERGY-21.RU 20Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»2110, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Characteristics
LK 1
60/1
10-2
SPU
HL1
LK 1
60/1
10-�
SPU
HL1
LK 1
60/1
10-4
SP
UH
L1LK
70/
150-
2SP
UH
L1LK
120
/150
-2SP
U
HL1
LK 7
0/15
0-�S
P U
HL1
LK 1
20/1
50-�
SP
UH
L1LK
70/
150-
4SP
UH
L1LK
120
/150
-4SP
U
HL1
Nominal voltage, kV 110 150
Mechanical tensile failing load, not less kN 160 70 120 70 120 70 120
Spacing Н, mm 1450 1510 1570 1594 1694 1747 1847 2206 2306Length of insulating part L, mm 1022 1082 1142 1346 1500 1959Leakage distance, сm 319 337 390 342 425 535
Coupling dimensions
B 25 +0,9-1,3 16 +0,9
-1,1 22 +0,9-1,3 16 +0,9
-1,1 22 +0,9-1,3 16 +0,9
-1,1 22 +0,9-1,3
Ød 26 +1,5+0,2 17 +1,2
+0,3 23 +1,5+0,2 17 +1,2
+0,3 23 +1,5+0,2 17 +1,2
+0,3 23 +1,5+0,2
ØD 41-1,6 33,3-1,5
Ød1 21-1,3 17-1,2
b 19,5-1,4 13,4-1,3
Screen diameter, mm
Ødv (upper) 160 135Ødn (bottom) 160
Weight, not more, kg 8 8,3 8,6 5,2 6,4 5,9 7,3 7,8 9,3Pollution level (PL) acc. to STO 56947007-29.240.068-2011 (Publ.7, Cl. 1.9,)
2 3 4 2 3 4
50% power frequency discharge voltage in wet and polluted conditions, not less, kV
160 240
Power frequency withstand voltage:– dry, kV– under rain, kV 340
325390380
340325
390380
Withstand voltage lightning impulse, not less, kV 550 650 550 650
Fig. No. 1 2
Fig. 1 Fig. 2
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
WWW.ENERGY-21.RU 22Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»2�10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Characteristics
LK 7
0/22
0-2S
P U
HL1
LK 1
20/2
20-2
SP
UH
L1
LK 7
0/22
0-�S
P U
HL1
LK 1
20/2
20-�
SP
UH
L1
LK 1
60/2
20-2
SP
UH
L1
LK 1
60/2
20-�
SP
UH
L1
LK 7
0/22
0-4S
P U
HL1
LK 1
20/2
20-4
SP
UH
L1
LK 1
60/2
20-4
SP
UH
L1
Nominal voltage, kV 220
Mechanical tensile failing load, not less kN 70 120 70 120 160 70 120 160
Spacing Н, mm 2206 2306 2564 2664 2410 2590 2650 2750 2830
Length of insulating part L, mm 1917 2275 1941 2121 2361
Leakage distance, сm 505 580 609 663 790
Coupling dimensions
B 16+0,9-1,1 22
+0,9-1,3 16
+0,9-1,1 22
+0,9-1,3 25
+0,9-1,3 16
+0,9-1,1 22
+0,9-1,3 25
+0,9-1,3
Ød 17+1,2+0,3 23
+1,5+0,2 17
+1,2+0,3 23
+1,5+0,2 26
+1,5+0,2 17
+1,2+0,3 23
+1,5+0,2 26
+1,5+0,2
ØD 33,3-1,5 41-1,6 33,3-1,5 41-1,6
Ød1 17-1,2 21-1,3 17-1,2 21-1,3
b 13,4-1,3 19,5-1,4 13,4-1,3 19,5-1,4
Screen diameter, mm
Ødv (upper) 160
Ødn (bottom) 260
Weight, not more, kg 7,9 11,8 9,7 13,9 14,8 16,1 10,6 12,5 16,3
Pollution level (PL) acc. to STO 56947007-29.240.068-2011(Publ.7, Cl. 1.9,)
2 3 2 3 4
50% power frequency discharge voltage in wet and polluted conditions, not less, kV
260
Power frequency withstand voltage:– dry, kV– under rain, kV
580550
600580
580550
600580
650620
Withstand voltage lightning impulse, not less, kV 980 1000 980 1000 1100
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
WWW.ENERGY-21.RU 24Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»2510, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Characteristics
LK 7
0/��
0-2S
P U
HL1
LK 1
20/�
�0-2
SP U
HL1
LK 1
60/�
�0-2
SP U
HL1
LK 7
0/��
0-�S
P U
HL1
LK 1
20/�
�0-�
SP U
HL1
LK 1
60/�
�0-�
SP U
HL1
Nominal voltage, kV 330
Mechanical tensile failing load, not less kN 70 120 160 70 120 160
Spacing Н, mm 2950 3050 3130 3070 3170 3250
Length of insulating part L, mm 2621 2741
Leakage distance, сm 826 905
Coupling dimensions
B 16+0,9-1,1 22
+0,9-1,3 25
+0,9-1,3 16
+0,9-1,1 22
+0,9-1,3 25
+0,9-1,3
Ød 17+1,2+0,3 23
+1,5+0,3 26
+1,5+0,2 17
+1,2+0,3 23
+1,5+0,3 26
+1,5+0,2
ØD 33,3-1,5 41-1,6 33,3-1,5 41-1,6
Ød1 17-1,2 21-1,3 17-1,2 21-1,3
b 13,4-1,3 19,5-1,4 13,4-1,3 19,5-1,4
Screen diameter, mmØdv (upper) 160
Ødn (bottom) 370
Weight, not more, kg 12,5 13,5 16,9 13,1 14,5 17,4Pollution level (PL) acc. to STO 56947007-29.240.068-2011 (Publ.7, Cl. 1.9,)
2 3
50% power frequency discharge voltage in wet and polluted conditions, not less, kV 315
Power frequency withstand voltage:– dry, kV– under rain, kV
650650
Withstand voltage lightning impulse, not less, kV 1410
Switching surge voltage test under rain, kV 950
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
WWW.ENERGY-21.RU 26Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»2710, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Characteristics
LK 7
0/33
0-2S
P М
U
HL1
LK 1
20/3
30-2
SP М
U
HL1
LK 1
60/3
30-2
SP М
U
HL1
LK 7
0/50
0-2S
P М
U
HL1
LK 1
20/5
00-2
SP М
U
HL1
LK 1
60/5
00-2
SP М
U
HL1
LK 2
10/5
00-2
SP М
U
HL1
Nominal voltage, kV 330 500
Mechanical tensile failing load, not less kN 70 120 160 70 120 160 210
Spacing Н, mm 2996 3083 3254 4074 4283 4453 4490
Length of insulating part L, mm 2667 2653 2744 3746 3853 3944 3954
Leakage distance, сm 735 725 1073
Coupling dimensions
B 16+0,9-1,1 22
+0,9-1,3 25
+0,9-1,3 16
+0,9-1,1 22
+0,9-1,3 25
+0,9-1,3 28
+0,9-1,3
Ød 17+1,2+0,3 23
+1,5+0,2 26
+1,5+0,2 17
+1,2+0,3 23
+1,5+0,2 26
+1,5+0,2 29
+1,5+0,2
ØD 33,3-1,5 41-1,6 33,3-1,5 41-1,6
Ød1 17-1,2 21-1,3 17-1,2 21-1,3
b 13,4-1,3 19,5-1,4 13,4-1,3 19,5-1,4
Screen diameter, mm
Ødv (upper) 160
Ødn (bottom) 435
Weight, not more, kg 18,7 19,9 21,7 22,1 23,6 25,1 25,5
Pollution level (PL) acc. to STO 56947007-29.240.068-2011 (Publ.7, Cl. 1.9,)
2
50% power frequency discharge voltage in wet and polluted conditions, not less, kV
315 460
Power frequency withstand voltage:– dry, kV– under rain, kV
650650
800800
Withstand voltage lightning impulse, not less, kV 1410 1940
Switching surge voltage test under rain, kV 950 1230
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
WWW.ENERGY-21.RU 2�Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»2910, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Characteristics
LK 7
0/50
0-2S
P U
HL1
LK 1
20/5
00-2
SP
UH
L1
LK 1
60/5
00-2
SP
UH
L1
LK 2
10/5
00-2
SP
UH
L1
LK 7
0/50
0-�S
P U
HL1
LK 1
20/5
00-�
SP
UH
L1
LK 1
60/5
00-�
SP
UH
L1
LK 2
10/5
00-�
SP
UH
L1
Nominal voltage, kV 500
Mechanical tensile failing load, not less kN 70 120 160 210 70 120 160 210
Spacing Н, mm 3910 4010 4090 4100 4330 4430 4510 4520
Length of insulating part L, mm 3581 4001
Leakage distance, сm 1116 1315
Coupling dimensions
B 16+0,9-1,1 22
+0,9-1,3 25
+0,9-1,3 28
+0,9-1,3 16
+0,9-1,1 22
+0,9-1,3 25
+0,9-1,3 28
+0,9-1,3
Ød 17+1,2+0,3 23
+1,5+0,2 26
+1,5+0,2 29
+1,5+0,2 17
+1,2+0,3 23
+1,5+0,2 26
+1,5+0,2 29
+1,5+0,2
ØD 33,3-1,5 41-1,6 33,3-1,5 41-1,6
Ød1 17-1,2 21-1,3 17-1,2 21-1,3
b 13,4-1,3 19,5-1,4 13,4-1,3 19,5-1,4
Screen diameter, mm
Ødv (upper) 160
Ødn (bottom) 370
Weight, not more, kg 18,5 19,1 20,0 20,2 19,7 20,3 21,1 21,3
Pollution level (PL) acc.to STO 56947007-29.240.068-2011(Publ.7, Cl. 1.9,)
2 3
50% power frequency discharge voltage in wet and polluted conditions, not less, kV
460
Power frequency withstand voltage:– dry, kV– under rain, kV
800800
Withstand voltage lightning impulse, not less, kV 1940
Switching surge voltage test un-der rain, kV 1230
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
Part I. Composite suspension insulators, GOST 551�9, TU 27.90.12.110-012-216�92�2-2017, TU �494-015-216�92�2-2006
WWW.ENERGY-21.RU �0Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»�110, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part II.Bird protection device
for composite suspension insulators
General scope (application):
Bird-protective device is designed to protect the composite suspension insula-tors from the waste products of birds and prevent the defeat of birds by electric current through a stream of manure. The bird protection device is mounted on the end fitting of a composite suspension insulator of class 70 kN or 120 kN and is used on overhead AC power lines with a voltage of 10–220 kV in areas with 1–4 degree of pollution. The climatic modification is UHL and the category of disposing is 1 in accordance with Russian GOST 15150. Bird-protective device is operated at maxi-mum operating tempera-tures from -60°C to +50°C and installation at altitude no more than 1000 m above sea level. Bird-protective device is made of silicone rub-ber, which is resistant to a wide range of environmental factors, so that the device retains its performance throughout the life of the product. In fig. 2 shows the use of the device in conjunction with the insulator LK 70/110-2SP.
Reference designation:PZU 31-300 is a bird protection device made of silicone rubber with an internal
diameter of 31mm and an outer diameter of 300 mm. It is manufac-tured according to TU 3494-035-21639232-2016 and complies with the re-quirements of the stan-dard of the organization of PAO «ROSSETI» STO 34.01-2.2-010-2015.
Part II. Bird protection device for composite suspension insulators,TU �494-0�5-216�92�2-2016
Part II. Bird protection device for composite suspension insulators,TU �494-0�5-216�92�2-2016
Parameter PZU 31-190 PZU 31-300 PZU 31-460( PZU 35-460)
Outer diameter D, мм 190 300 460
Internal diameter d, мм 31 31 31(35)
Height Н, мм 36,2 41 40,9
Weight, not more, kg 0,35 0,85 1,55
Class of resistance to burning according to GOST 28779 ПВ 0
Tracking-erosion resistant grade according to GOST 27474 1В4,5
The class of surface hydrophobicity according to GOST R 52082 1
Fig. No. 1
Fig. 1 Fig. 2
WWW.ENERGY-21.RU �2Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»��10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part III.Composite pin insulators
General scope (application):Polymeric pin insulators are intended for insulation and fixture of the conduc-
tors in the power transmission lines and bus arrangement of the switchgears of AC power stations and substations with voltage of 10–20 kV and frequency up to 100 Hz at temperature from -60°C to +50°C. The cli-matic modification of the insulators is UHL and the category of disposing is 1 in accordance with Russian GOST 15150 and meets to requirement of GOST 15543/1.
Reference designation of insulator (classification):
climatic performance acc. To GOST 15150, category of installation 1the index of the modification of the insulator, providing a complete set of the sleeve for fixing the wire in the groovethe design involving the presence of a chute for rolling wiresmaximum level of pollution acc. PUE edition 7, item. 1.9, STO 56947007-29.240.068-201110, 20 – nominal voltage, kV
P – composite
Sh – pin
Part III. Composite pin insulatorsTU �49�-01�-216�92�2-2007; TU �49�-029-216�92�2-2015
Characteristics ShP-10 UHL1
ShP-10-4 UHL1
ShP-20 UHL1
Nominal voltage, kV 10 20
Puncture voltage, not less, kV 130 150
Full lightning impulse voltage test, kV 80 130
Dry test voltage, kV 50 70
Wet test voltage, kV 40 60
Leakage distance, cm 28 42
Specified mechanical failing bending load, not less, kN 12,5 13
Installation on pins and hooks with diameter D, mm
capsule
К6 К7 К9 К10
20 22 24 22
Weight, not more, kg 0,73 1,1
Porcelain analogue ШФ-10Г – ШФ-10Г
Glass analogue ШС-10 – ШС-10
Fig. No. 1 2
Part III. Composite pin insulatorsTU �49�-01�-216�92�2-2007; TU �49�-029-216�92�2-2015
Fig. 1 Fig. 2
WWW.ENERGY-21.RU �4Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»�510, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Characteristics ShP 10G UHL 1
ShP 10G1 UHL1
Nominal voltage, kV 10
Puncture voltage, not less, kV 130
Full lightning impulse voltage test, kV 80
Dry test voltage, kV 50
Wet test voltage, kV 40
Leakage distance, cm 28
Specified mechanical failing bending load, not less, kN 12,5
Installation on pins and hooks with diameter D, mm
capsule
К6 К7 К9
20 22 24
Weight, not more, kg 1,0
Porcelain analogue ШФ-10Г
Glass analogue ШС-10 –
Fig. No. 1 2
Fig. 1 Fig. 2
Part III. Composite pin insulatorsTU �49�-01�-216�92�2-2007; TU �49�-029-216�92�2-2015
Part III. Composite pin insulatorsTU �49�-01�-216�92�2-2007; TU �49�-029-216�92�2-2015
WWW.ENERGY-21.RU �6Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»�710, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part IV.Composite line post insulators
General scope (application):
It is intended for fastening and insulation uninsulated and insulated wires pro-tected by overhead power lines and switchgear stations and substations AC volt-age 10–35 kV and frequency up to 100 Hz in areas with 1–4 degree of pollution. Insulators is operated at maximum operating temperatures from -60°C to +50°C and installation at altitude no more than 1000 m above sea level.
The wire can be fixed in the gutter or on the neck of the insulator. Fixing to metal supports (traverse) is carried out by bolting. The presence of the gutter and the protective plastic sleeve allows the expansion of the wires without the use of rolling rollers. This reduces installation time and reduces its cost. After rolling the wires along the insulators, they should be fixed in the groove or on the neck of the insulator on straight sections of the line and on the neck – when the line turns.
Insulators have several modifications depending on the voltage of the net-work, diameter and length of the stud pin for attaching the insulator to the tra-verse. As agreed with the customer, it is possible to manufacture insulators with other con-necting stud pin sizes.
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
Reference designation of insulator (classification):
version 1 – of an insulator on a wooden transmis-sion tower, without version – on a metal transmis-sion tower
climatic performance acc. to GOST 15150
2,3,4 – maximum level of pollution acc. PUE edi-tion 7, item. 1.9, STO 56947007-29.240.068-2011
stud pin length, mm
thread diameter stud pin
the index of the modification of the insulator, according to the method of fastening the wire on the fitting;
10, 20, 35 – nominal voltage, kV
12,5; 16 – specified mechanical failing bending load, kN
K – material of protective coating of insulating part: sili-con rubber
line post insulator.
Example of reference designation
Insulator OLSK 12,5/20-A24-50-4 UHL1 TU 27.90.12.110-034-21639232-2016 – is a line post pin insulator with protective coating from silicon rubber with speci-fied failing bending load of 12,5 kN, for nominal voltage of 20 kV, with modification of end fitting А and thread size stud pin M24 and length 50 mm, for operation in areas with the pollution level 4, climatic performance UHL, category of installation 2, on a transmission tower.
tion uninsulated and insulated wires
lution. Insulators is operated at maximum operating temperatures from and installation at altitude no more than 1000 m above sea
Reference designation of insulator (classification):
OLS K 16/10–A 20–50–4 UHL1 version 1
WWW.ENERGY-21.RU ��Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»�910, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
OLS
K 1
6/10
-А20
-50-
4 U
HL1
OLS
K 1
6/10
-А20
-90-
4 U
HL1
OLS
K 1
6/10
-А24
-50-
4 U
HL1
OLS
K 1
6/10
-А24
-90-
4 U
HL1
OLS
K 1
6/10
-А20
-130
-4
UH
L1 v
ersi
on 1
OLS
K 1
6/10
-А20
-200
-4
UH
L1 v
ersi
on 1
OLS
K 1
6/10
-А24
-130
-4
UH
L1 v
ersi
on 1
OLS
K 1
6/10
-А24
-200
-4
UH
L1 v
ersi
on 1
Nominal voltage, kV 10
Specified mechanical failing bending load, not less, kN 16
Pollution level acc. PUE- edition 7 cl.1.9;STO 56947007-29.240.068-2011 4
Leakage distance, not less, cm 50
Spacing Нстр., mm 267
Insulating length L, mm 207
Stud pin length, mm 50 90 50 90 130 200 130 200
Width across flat S, mm 55 75
Weight, not more, kg 5 5,1 5,2 5,6 5,9 6,2
Full lightning impulse voltage test,not less, kV 120
Dry short-term voltage test, not less, kV 65
Wet short-term voltage test, not less, kV 45
At specified relative surface conductivity µСm, not less 20
Thread size stud pin D М20 М24 М20 М24
Fig. No. 1 2
Fig. 1 Fig. 2
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
WWW.ENERGY-21.RU 40Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»4110, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
OLS
K 1
2,5/
20-А
20-5
0-4
UH
L1O
LSK
12,
5/20
-А20
-90-
4 U
HL1
OLS
K 1
2,5/
20-А
24-5
0-4
UH
L1O
LSK
12,
5/20
-А24
-90-
4 U
HL1
OLS
K 1
2,5/
20-А
20-1
30-4
U
HL1
ver
sion
1O
LSK
12,
5/20
-А20
-200
-4
UH
L1 v
ersi
on 1
OLS
K 1
2,5/
20-А
24-1
30-4
U
HL1
ver
sion
1O
LSK
12,
5/20
-А24
-200
-4
UH
L1 v
ersi
on 1
Nominal voltage, kV 20
Specified mechanical failing bending load, not less, kN 12,5
Pollution level acc. PUE- edition 7 cl.1.9;SТО 56947007-29.240.068-2011 4
Leakage distance, not less, cm 84
Spacing Нстр., mm 365
Insulating length L, mm 305
Stud pin length, mm 50 90 50 90 130 200 130 200
Width across flat S, mm 55 75
6,6Weight, not more, kg 5,6 5,7 5,8 6 6,1 6,3 6,6
Full lightning impulse voltage test,not less, kV 150
Dry short-term voltage test, not less, kV 75
Wet short-term voltage test, not less, kV 60
At specified relative surface conductivity µСm, not less 20
Thread size stud pin D М20 М24 М20 М24
Fig. No. 3 4
Fig. 3 Fig. 4
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
WWW.ENERGY-21.RU 42Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»4�10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
OLS
K 1
2,5/
35-А
20-5
0-2
UH
L1O
LSK
12,
5/35
-А20
-90-
2 U
HL1
OLS
K 1
2,5/
35-А
24-5
0-2
UH
L1O
LSK
12,
5/35
-А24
-90-
2 U
HL1
OLS
K 1
2,5/
35-А
20-1
30-2
U
HL1
ver
sion
1O
LSK
12,
5/35
-А20
-200
-2
UH
L1 v
ersi
on 1
OLS
K 1
2,5/
35-А
24-1
30-2
U
HL1
ver
sion
1O
LSK
12,
5/35
-А24
-200
-2
UH
L1 v
ersi
on 1
Nominal voltage, kV 35
Specified mechanical failing bending load, not less, kN 12,5
Pollution level acc. PUE- edition 7 cl.1.9;SТО 56947007-29.240.068-2011 2
Leakage distance, not less, cm 96
Spacing Нстр., mm 404
Insulating length L, mm 344
Stud pin length, mm 50 90 50 90 130 200 130 200
Width across flat S, mm 55 75
6,6Weight, not more, kg 5,8 5,9 6,0 6,4 6,6 6,8
Full lightning impulse voltage test,not less, kV 200
Dry short-term voltage test, not less, kV 105
Wet short-term voltage test, not less, kV 95
At specified relative surface conductivity µСm, not less 5
Thread size stud pin D М20 М24 М20 М24
Fig. No. 5 6
Fig. 5 Fig. 6
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
WWW.ENERGY-21.RU 44Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»4510, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
OLS
K 1
2,5/
35-А
20-5
0-3
UH
L1O
LSK
12,
5/35
-А20
-90-
3 U
HL1
OLS
K 1
2,5/
35-А
24-5
0-3
UH
L1O
LSK
12,
5/35
-А24
-90-
3 U
HL1
OLS
K 1
2,5/
35-А
20-1
30-3
U
HL1
ver
sion
1O
LSK
12,
5/35
-А20
-200
-3
UH
L1 v
ersi
on 1
OLS
K 1
2,5/
35-А
24-1
30-3
U
HL1
ver
sion
1O
LSK
12,
5/35
-А24
-200
-3
UH
L1 v
ersi
on 1
Nominal voltage, kV 35
Specified mechanical failing bending load, not less, kN 12,5
Pollution level acc. PUE- edition 7 cl.1.9;SТО 56947007-29.240.068-2011 3
Leakage distance, not less, cm 116
Spacing Нстр., mm 413
Insulating length L, mm 353
Stud pin length, mm 50 90 50 90 130 200 130 200
Width across flat S, mm 55 75
6,6Weight, not more, kg 6,0 6,1 6,2 6,5 6,7 7,2
Full lightning impulse voltage test,not less, kV 200
Dry short-term voltage test, not less, kV 105
Wet short-term voltage test, not less, kV 95
At specified relative surface conductivity µСm, not less 10
Thread size stud pin D М20 М24 М20 М24
Fig. No. 7 8
Fig. 7 Fig. 8
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
WWW.ENERGY-21.RU 46Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»4710, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
OLS
K 1
6/10
-B20
-50-
4 U
HL1
OLS
K 1
6/10
-B20
-90-
4 U
HL1
OLS
K 1
6/10
-B24
-50-
4 U
HL1
OLS
K 1
6/10
-B24
-90-
4 U
HL1
OLS
K 1
6/10
-B20
-1�0
-4
UH
L1 v
ersi
on 1
OLS
K 1
6/10
-B20
-200
-4
UH
L1 v
ersi
on 1
OLS
K 1
6/10
-B24
-1�0
-4
UH
L1 v
ersi
on 1
OLS
K 1
6/10
-B24
-200
-4
UH
L1 v
ersi
on 1
Nominal voltage, kV 10
Specified mechanical failing bending load, not less, kN 16
Pollution level acc. PUE- edition 7 cl.1.9;SТО 56947007-29.240.068-2011 4
Leakage distance, not less, cm 50
Spacing Нстр., mm 267
Insulating length L, mm 207
Stud pin length, mm 50 90 50 90 130 200 130 200
Width across flat S, mm 55 75
Weight, not more, kg 4,6 4,7 4,8 5,2 5,5 5,8
Full lightning impulse voltage test,not less, kV 120
Dry short-term voltage test, not less, kV 65
Wet short-term voltage test, not less, kV 45
At specified relative surface conductivity µСm, not less 20
Thread size stud pin D М20 М24 М20 М24
Fig. No. 9 10
Fig. 9 Fig. 10
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
WWW.ENERGY-21.RU 4�Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»4910, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
OLS
K 1
2,5/
20-B
20-5
0-4
UH
L1O
LSK
12,
5/20
-B20
-90-
4 U
HL1
OLS
K 1
2,5/
20-B
20-9
0-4
UH
L1O
LSK
12,
5/20
-B24
-90-
4 U
HL1
OLS
K 1
2,5/
20-B
20-1
�0-4
U
HL1
ver
sion
1O
LSK
12,
5/20
-B20
-200
-4
UH
L1 v
ersi
on 1
OLS
K 1
2,5/
20-B
24-1
�0-4
U
HL1
ver
sion
1O
LSK
12,
5/20
-B24
-200
-4
UH
L1 v
ersi
on 1
Nominal voltage, kV 20
Specified mechanical failing bending load, not less, kN 12,5
Pollution level acc. PUE- edition 7 cl.1.9;SТО 56947007-29.240.068-2011 4
Leakage distance, not less, cm 84
Spacing Нстр., mm 365
Insulating length L, mm 305
Stud pin length, mm 50 90 50 90 130 200 130 200
Width across flat S, mm 55 75
Weight, not more, kg 5,2 5,3 5,4 5,6 5,7 5,9 6,2
Full lightning impulse voltage test,not less, kV 150
Dry short-term voltage test, not less, kV 75
Wet short-term voltage test, not less, kV 60
At specified relative surface conductivity µСm, not less 20
Thread size stud pin D М20 М24 М20 М24
Fig. No. 11 12
Fig. 11 Fig. 12
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
WWW.ENERGY-21.RU 50Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»5110, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
OLS
K 1
2,5/
�5-B
20-5
0-2
UH
L1O
LSK
12,
5/�5
-B20
-90-
2 U
HL1
OLS
K 1
2,5/
�5-B
24-5
0-2
UH
L1O
LSK
12,
5/�5
-B24
-90-
2 U
HL1
OLS
K 1
2,5/
�5-B
20-1
�0-2
U
HL1
ver
sion
1O
LSK
12,
5/�5
-B20
-200
-2
UH
L1 v
ersi
on 1
OLS
K 1
2,5/
�5-B
24-1
�0-2
U
HL1
ver
sion
1O
LSK
12,
5/�5
-B24
-200
-2
UH
L1 v
ersi
on 1
Nominal voltage, kV 35
Specified mechanical failing bending load, not less, kN 12,5
Pollution level acc. PUE- edition 7 cl.1.9;SТО 56947007-29.240.068-2011 2
Leakage distance, not less, cm 96
Spacing Нстр., mm 404
Insulating length L, mm 344
Stud pin length, mm 50 90 50 90 130 200 130 200
Width across flat S, mm 55 75
Weight, not more, kg 5,4 5,5 5,6 6,0 6,2 6,4
Full lightning impulse voltage test,not less, kV 200
Dry short-term voltage test, not less, kV 105
Wet short-term voltage test, not less, kV 95
At specified relative surface conductivity µСm, not less 5
Thread size stud pin D М20 М24 М20 М24
Fig. No. 13 14
Fig. 13 Fig. 14
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
WWW.ENERGY-21.RU 52Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»5�10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
OLS
K 1
2,5/
�5-B
20-5
0-�
UH
L1O
LSK
12,
5/�5
-B20
-90-
� U
HL1
OLS
K 1
2,5/
�5-B
24-5
0-�
UH
L1O
LSK
12,
5/�5
-B24
-90-
� U
HL1
OLS
K 1
2,5/
�5-B
20-1
�0-�
U
HL1
ver
sion
1O
LSK
12,
5/�5
-B20
-200
-�
UH
L1 v
ersi
on 1
OLS
K 1
2,5/
�5-B
24-1
�0-�
U
HL1
ver
sion
1O
LSK
12,
5/�5
-B24
-200
-�
UH
L1 v
ersi
on 1
Nominal voltage, kV 35
Specified mechanical failing bending load, not less, kN 12,5
Pollution level acc. PUE- edition 7 cl.1.9;SТО 56947007-29.240.068-2011 3
Leakage distance, not less, cm 116
Spacing Нстр., mm 413
Insulating length L, mm 353
Stud pin length, mm 50 90 50 90 130 200 130 200
Width across flat S, mm 55 75
Weight, not more, kg 5,6 5,7 5,8 6,1 6,3 6,8
Full lightning impulse voltage test,not less, kV 200
Dry short-term voltage test, not less, kV 105
Wet short-term voltage test, not less, kV 95
At specified relative surface conductivity µСm, not less 10
Thread size stud pin D М20 М24 М20 М24
Fig. No. 15 16
Fig. 15 Fig. 16
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
Part IV. Composite line post insulators,TU 27.90.12.110-0�4-216�92�2-2016
WWW.ENERGY-21.RU 54Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»5510, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part V.Composite interphase
insulating spacers
General scope (application)
Polymeric interphase insulating spacers are intended for insulating fixture of the conductors in the power transmission lines with voltage of 10–220 kV. The spacers are operated at outside temperatures from -60°C to +50°C and installation at alti-tude no more than 1000 m above sea level in the areas with 1–4 levels of pollution according to GOST 9920.
Part V. Composite interphase insulating spacers,TU �494-009-216�92�2-2001
Reference designation of spacers (classification)
Index for the diameter of pressed conductor:А – 9,6…15,2 mm;B – 15,2…24,5 mm;V – 24,5…28,0 mm;G – 28,5…37,5 mm;D – 37,7…46,0 mm.
Spacing, m – is specified by the customer from the range of 0,4–6,0 m, upon agreement with the manufacturer.
10÷220 – nominal voltage of TL, kV
2,5÷70 – specified mechanical failing tensile load ,kN, not lessr – variable
Sh – equipped with a hinge Assembly (allows bend-ing in the center at an angle of more than 12°)
I – insulating
М – interphaseR – spacer
Example of reference designation:
Spacer RМI-70/110-4.5-B TU 3493-009-21639232-2001 – Compo-site insu-lating interphase spacer with specified mechanical failing tensile load of 70 kN for transmission line of 110 kV, fixing the conductors with di-ameter 15,2–24,5 mm acc. GOST 839 at distance 4,5 m.
Spacer RМIr-70/110-3,6-4,2-V TU 3493-009-21639232-2001 – Composite in-sulating interphase spacer with specified mechanical failing tensile load of 70 kN for transmission line of 110 kV, fixing the conductors with diameter 24,5–28 mm acc. GOST 839 at a distance of 3,6 m to 4,2 m.
Part V. Composite interphase insulating spacers,TU �494-009-216�92�2-2001
3 За
к. 2
130
Polymeric interphase insulating spacers are intended for insulating
C to
R I Sh r – 70 / 110–3,8-4,2–B
Example of reference designation:
WWW.ENERGY-21.RU 56Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»5710, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
RМ
I-16/
10-0
.4-А
RМ
I -70
/10-
0.4-
B
RМ
I -16
/35-
1.0-
А
RМ
I -70
/35-
1.0-
B
RМ
I -70
/35-
1.0-
B
Nominal voltage, kV 10 35
Spacing Н, m 0,8–2,5 1,5–5,0
Length of insulating part L+L, not less, mm 380 654
Leakage distance, not less, сm 110 180
Diameter of conductor d, mm 9,6–15,2
15,2–24,5
9,6–15,2
15,2–24,5
24,5–28,0
Diameter of screen D, mm –
Weight, not more, kg 3,7 9,5
Specified mechanical failing tensile load, kN, not less 16 70 16 70
Mechanical failing bending load, not less, Nхm 150
Normalized Compression breaking load, not less, Nхm 1
Fig No. 1 2 1 2
* – According to the agreement with the customer can be manufactured in any length spacers.** – In the case of a tread, take into account its diameter.
Fig. 1
3*
Part V. Composite interphase insulating spacers,TU �494-009-216�92�2-2001
Part V. Composite interphase insulating spacers,TU �494-009-216�92�2-2001
WWW.ENERGY-21.RU 5�Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»5910, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
RМ
I-70/
110-
2,5-
B
RМ
I-70/
110-
2,5-
V
RМ
I-70/
110-
2,5-
G
RМ
I-70/
220-
4,5-
B
RМ
I-70/
220-
4,5-
V
RМ
I-70/
220-
4,5-
G
RМ
I-70/
220-
4,5-
D
Nominal voltage, kV 110 220
Spacing Н, m 2,5…6,0 3,5…6,0
Length of insulating part (L+L), not less, mm 1976 3202
Leakage distance, not less, сm 600 1000
Diameter of conductor d, mm 15,2–24,5
24,5–28,0
28,5–37,5
15,2–24,5
24,5–28,0
28,5–37,5
37,7–46,0
Diameter of screen D, mm 160 260
Specified mechanical failing tensile load, kN, not less 70
Mechanical failing bending load, not less, Nхm 150
Normalized Compression breaking load, not less, Nхm 1
Weight, not more, kg 25 35
Fig No. 2
* – According to the agreement with the customer can be manufactured in any length spacers** – In the case of a tread, take into account its diameter.It is possible to manufacture adjustable spacers with an adjustment step of 100 mm, as shown in Fig. 3. The adjustment range of the construction height of the strut is up to 800 mm.
Fig. 3
Part V. Composite interphase insulating spacers,TU �494-009-216�92�2-2001
Part V. Composite interphase insulating spacers,TU �494-009-216�92�2-2001
Fig. 2
WWW.ENERGY-21.RU 60Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»6110, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part VI.Composite post insulators
Post insulators for voltage of �5-220 kVare accepted by The Research & Design Center
for Power Engineering (RDCPE)and recommended for application in the projects of RDCPE
General scope (application)
Polymeric post insulators are intended for outside installation for insulating and fixture of current-carrying parts in electrical apparatus, switchgears of AC power stations and substations with voltage of 1–220 kV and frequency up to 100 Hz.
The climatic modification of the insulators is U3 and UHL, and the category of disposing is 1 and 2 in accordance with Russian GOST 15150. The insu-lators are operated at operating temperatures from -60° C to +50° C and in-stallation at altitude no more than 1000 m above sea level.
For the insulators of U3 and UHL2 acc. to GOST 15150 it is possible to com-plete with the flanges from non-magnetic material.
The shape of post surface of flanges is possible to be square or round.Technical conditions: TU 3493-014-21639232-2008; TU 3493-016-21639232-
2008; TU 3493-017-21639232-2008; TU 3493-020-21639232-2008.
Part VI. Composite post insulators Part VI. Composite post insulators
Reference designation of insulator (classification):
U3, UHL – climatic performance acc. to GOST 15150;the 1st and 2nd category of installation acc. to GOST 151501-4 – maximum level of pollution acc. to PUE of 7 edition, cl. 1,9; STO 56947007-29.240.068-2011А01 – modification index of insulatorLetter – spacing.Numeral – fitting dimensions of flanges.1; 10; 20; 24; 35... – nominal voltage, kV
2,5; 6; 8; 10; 12,5; 20... – specified mechanical failing bending load, kN
K – material of protective body – silicon rubber.
S –core
O – post
Example of reference designation
Insulator ОSK 8-20-B01-1 UHL2 TU 3493-014-21639232-2008 is a post pin insulator with protective coating from silicon rubber with specified failing bending load of 8 kN, for nominal voltage of 20 kV, with modification of spacing B and coupling dimensions of flanges 01, for operation in areas with the pollution level 1, climatic performance UHL, category of installation 2.
WWW.ENERGY-21.RU 62Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»6�10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
OSK �-10-A01-2UHL 2
ОСК 10-10-А01-2UHL 2
ОСК �-20-B01-2UHL 2
GOST Р 52034-2008; TU 3493-014-21639232-2008
Nominal voltage, kV 10 20
Spacing Н, mm 120 170
Insulating length L, mm 107 112 162
Leakage distance, not less, cm 20 19,5 30
Weight, not more, kg 0,7 1,2 1,6
Pollution level acc. PUE- edition 7-cl.1.9; STO 56947007-29.240.068-2011 2
Specified mechanical failing bending load, not less, kN 8 10 8
Specified failing rotational torque, not less kNxm 0,245
Withstand voltage industrial frequency in a dry, kV 42 65
Withstand voltage lightning impulse, not less, kV 75 125
Porcelain analogue ИОР-10-7,50 III УХЛ ИОР-20-7,50 III УХЛ
Fig No. 1 2
Part VI. Composite post insulators Part VI. Composite post insulators
Fig. 1 Fig. 2
WWW.ENERGY-21.RU 64Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»6510, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
ParameterOSK
8-20-А01-2UHL 2
OSK�-24-B01-2
UHL 2
GOST Р 52034-2008; TU 3493-014-21639232-2008
Nominal voltage, kV 20 24
Spacing Н, mm 232 302
Insulating length L, mm 178 238
Leakage distance, not less, cm 50 75
Weight, not more, kg 2,9 3,3
Pollution level acc. PUE- edition 7-cl.1.9; STO 56947007-29.240.068-2011 2
Specified mechanical failing bending load, not less, kN 8
Specified failing rotational torque, not less kNxm 0,245
Withstand voltage industrial frequency in a dry, kV 65 75
Withstand voltage lightning impulse, not less, kV 125 150
Porcelain analogue ИОРФ -20-8,01 УХЛ 2
ИОРФ -24-8,01 УХЛ 2
Fig No. 1
Fig. 1
Part VI. Composite post insulators Part VI. Composite post insulators
WWW.ENERGY-21.RU 66Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»6710, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
ParameterOSK
6-10-V02-1 UHL 1
OSK6-10-V0�-1
UHL 1
OSK6-10-G0�-2
UHL 1
GOST Р 52082-2003; TU 3493-016-21639232-2008
Nominal voltage, kV 10
Spacing Н, mm 190 215
Insulating length L, mm 76 101
Leakage distance, not less, cm 22 30
Weight, not more, kg 2,3 2,4
Pollution level acc. PUE- edition 7-cl.1.9; STO 56947007-29.240.068-2011 1 2
Specified mechanical failing bending load, not less, kN 6
Specified failing rotational torque, not less kNxm 0,245
Withstand voltage industrial frequency in a dry, kV 42
Withstand voltage industrial frequency in the rain, kV, not less 28
50% discharge voltage of industrial frequency in polluted and wet conditions, not less, kV 13
Withstand voltage lightning impulse, not less, kV 75
Fitting holes (bottom) М, mm М10 see figure
Porcelain analogue С4-80-I С6-80-I С6-80-II
Fig No. 1 2
Fig. 1 Fig. 2
Part VI. Composite post insulators Part VI. Composite post insulators
WWW.ENERGY-21.RU 6�Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»6910, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
ParameterOSK
12,5-10-D0�-4 UHL 1
OSK12,5-10-D071-4 UHL 1
OSK�-10-
D074-4 UHL 1
OSK�-20-
K071-4 UHL 1
OSK�-20-
K074-4 UHL 1
OSK10-20-E05-� UHL 1
GOST Р 52082-2003; TU 3493-016-21639232-2008
Nominal voltage, kV 10 20
Spacing Н, mm 285 420 280
Insulating length L, mm 165 284 177
Leakage distance, not less, cm 50 87 73
Weight, not more, kg 4,0 3,5 3,2 8,0 6,0
Pollution level acc. PUE- edition 7-cl.1.9; SТО 56947007-29.240.068-2011
4 3
Specified mechanical failing bending load, not less, kN 12,5 8 10
Specified failing rotational torque, not less kNxm 0,245
Withstand voltage industrial frequency in a dry, kV 42 65
Withstand voltage industrial frequency in the rain, kV, not less 28 50
50% discharge voltage of industrial frequency in polluted and wet conditions, not less, kV
13 26
Withstand voltage lightning impulse, not less, kV 75 125
Fitting dimension (upper) D/D1 (bottom)
Ø76(□54)/Ø76(□54)
Ø120(□85)/Ø120(□85)
115/115
Ø120(□85)/Ø120(□85)
115/115
Ø140(□99)/Ø140(□99)
Fitting holes n/d upper / n/d1 bottom
4М12/4М12
4Ø12/4Ø12
2Ø14/2Ø14
4Ø12/4Ø12
2Ø14/2Ø14
4М12/4Ø15
Porcelain analogue С12,5-80-II under agreement ОНШ
20-10
Fig No. 1Fig. 1
Under agreement with the customer it is possible to produce the flanges with round or square platform.
Part VI. Composite post insulators Part VI. Composite post insulators
WWW.ENERGY-21.RU 70Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»7110, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
ParameterOSK
4-20-Е04-3 UHL 1
OSK4-20-Е041-3
UHL 1
OSK10-20-Е05-4
UHL 1
GOST Р 52082-2003; TU 3493-016-21639232-2008
Nominal voltage, kV 20
Spacing Н, mm 350 280
Insulating length L, mm 202 222 170
Leakage distance, not less, cm 69 84
Weight, not more, kg 4,5 6,0
Pollution level acc. PUE- edition 7-cl.1.9;SТО 56947007-29.240.068-2011 3 4
Specified mechanical failing bending load, not less, kN 4 10
Specified failing rotational torque, not less kNxm 0,245
Withstand voltage industrial frequency in a dry, kV 65
Withstand voltage industrial frequency in the rain, kV, not less 50
50% discharge voltage of industrial frequency in polluted and wet conditions, not less, kV 26
Withstand voltage lightning impulse, not less, kV 125
Fitting dimension (upper) D/D1 (bottom) 50/50 50/76 Ø140(□99)/
Ø140(□99)
Fitting holes n/d upper / n/d1 bottom
2М10/2М10
2М10/2М12
4М12/4Ø15
Porcelain analogue ИОС 20500C4-170
under agreement ОНШ 20-10
Fig No. 1 2
Fig. 1 Fig. 2
Under agreement with the customer it is possible to produce the flanges with round or square platform.
4 За
к. 2
130
Part VI. Composite post insulators Part VI. Composite post insulators
WWW.ENERGY-21.RU 72Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»7�10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
ParameterOSK
20-10-Е05-4 UHL 1
OSK20-10-L07-1 UHL 1
OSK20-20-М04-3 UHL 1
OSK20-20-М05-3 UHL 1
GOST Р 52082-2003; TU 3493-016-21639232-2008
Nominal voltage, kV 10 20
Spacing Н, mm 284 210 355
Insulating length L, mm 169 130 220 235
Leakage distance, not less, cm 42 23 69
Weight, not more, kg 13,0 9,0 17,0
Pollution level acc. PUE- edition 7-cl.1.9;SТО 56947007-29.240.068-2011 4 1 3
Specified mechanical failing bending load,not less, kN 20
Specified failing rotational torque,not less kNxm 1,0
Withstand voltage industrial frequency in a dry, kV 42 65
Withstand voltage industrial frequency in the rain, kV, not less 28 50
50% discharge voltage of industrial frequency in polluted and wet conditions, not less, kV 13 26
Withstand voltage lightning impulse, not less, kV 75 125
Fitting dimension (upper) D/D1 (bottom)
Ø225(□160)/Ø225 (□160)
Ø120(□85)/Ø120 (□85)
Ø140(□99)/Ø225(□160)
Ø225(□160)/Ø225 (□160)
Fitting holes n/d upper / n/d1 bottom
4Ø18/4Ø18
4М12/4Ø15
4М12/4Ø18
4Ø18/4Ø18
Porcelain analogue ИОС 102000
ОНШ 10-10ОНШ 20-80
ИОС 202000
under agree-ment
Fig No. 1Fig. 1
Under agreement with the customer it is possible to produce the flanges with round or square platform.
4*
Part VI. Composite post insulators Part VI. Composite post insulators
WWW.ENERGY-21.RU 74Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»7510, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
ParameterOSK�-�5-B01-2 UHL 1
OSK�-�5-B02-2 UHL 1
OSK12,5-�5-А01-2 UHL 1
OSK�-�5-V0�-2 UHL 1
OSK5-�5-Е06-3 UHL 1
GOST Р 52082-2003; TU 3493-017-21639232-2008
Nominal voltage, kV 35
Spacing Н, mm 440 400 475 570
Insulating length L, mm 304 264 345 415
Leakage distance, not less, cm 95 110 95 116
Weight, not more, kg 8,5 8,0 6,5 12,0
Pollution level acc. PUE- edition 7-cl.1.9;SТО 56947007-29.240.068-2011 2 3
Specified mechanical failing bending load, not less, kN 8 12,5 8 5
Specified failing rotational torque, not less kNxm 0,6
Withstand voltage industrial frequency in a dry, kV 95
Withstand voltage industrial frequency in the rain, kV, not less 80
50% discharge voltage of industrial frequency in polluted and wet conditions, not less, kV
42
Withstand voltage lightning impulse,not less, kV 190
Fitting dimension (upper) D/D1 (bottom)
Ø140(□99)/Ø140(□99)
Ø127(□90)/Ø127(□90)
Ø140(□99)/Ø140(□99)
Ø76(□54)/Ø76(□54)
Ø140(□99)/Ø198(□140)
Fitting holes n/d upper / n/d1 bottom
4М12/4М12
4М12/4Ø12
4М12/4М12
4М12/4Ø18
Porcelain analogueИОС-35-
500-01С4-
195-1-Iunder
agreementС8-
200-IIИОС-35-
500-03Fig No. 1
Fig. 1
Under agreement with the customer it is possible to produce the flanges with round or square platform.
Part VI. Composite post insulators Part VI. Composite post insulators
WWW.ENERGY-21.RU 76Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»7710, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
ParameterOSK
12,5-�5-B01-2 UHL 1
OSK12,5-�5-B02-2 UHL 1
OSK�-�5-
B022-2 UHL 1
GOST Р 52082-2003; TU 3493-017-21639232-2008
Nominal voltage, kV 35
Spacing Н, mm 440
Insulating length L, mm 304
Leakage distance, not less, cm 95
Weight, not more, kg 10,5 10,0 8,0
Pollution level acc. PUE- edition 7-cl.1.9; SТО 56947007-29.240.068-2011 2
Specified mechanical failing bending load,not less, kN 12,5 8
Specified failing rotational torque, not less kNxm 0,6
Withstand voltage industrial frequency in a dry, kV 95
Withstand voltage industrial frequency in the rain, kV, not less 80
50% discharge voltage of industrial frequency in polluted and wet conditions, not less, kV 42
Withstand voltage lightning impulse, not less, kV 190
Fitting dimension (upper) D/D1 (bottom)
Ø140(□99)/Ø140(□99)
Ø127(□90)/Ø127(□90)
Ø127(□90)/Ø127(□90)
Fitting holes n/d upper / n/d1 bottom
4М12/4М12
4Ø13/4Ø13
Porcelain analogue ИОС-35-500-01
С4-195-1-I
under agreement
Fig No. 1
Fig. 1
Under agreement with the customer it is possible to produce the flanges with round or square platform.
Part VI. Composite post insulators Part VI. Composite post insulators
WWW.ENERGY-21.RU 7�Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»7910, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
ParameterOSK
20-�5-А01-2 UHL 1
OSK20-�5-А01-3 UHL 1
OSK10-�5-А06-2 UHL 1
GOST Р 52082-2003; TU 3493-017-21639232-2008
Nominal voltage, kV 35
Spacing Н, mm 400
Insulating length L, mm 290 264
Leakage distance, not less, cm 95 116 95
Weight, not more, kg 15,0 18,0 16,0
Pollution level acc. PUE- edition 7-cl.1.9;SТО 56947007-29.240.068-2011 2 3 2
Specified mechanical failing bending load,not less, kN 20 10
Specified failing rotational torque, not less kNxm 1,0
Withstand voltage industrial frequency in a dry, kV 95
Withstand voltage industrial frequency in the rain, kV, not less 80
50% discharge voltage of industrial frequency in polluted and wet conditions, not less, kV 42
Withstand voltage lightning impulse, not less, kV 190
Fitting dimension (upper) D/D1 (bottom) Ø140 (□99)/Ø140 (□99)
Ø140 (□99)/Ø198 (□140)
Fitting holesn/d upper / n/d1 bottom 4М12/4М12 4М12/
4Ø18
Porcelain analogue ИШД 35,ОНШ 35 under agreement
Fig No. 1
Fig. 1
Under agreement with the customer it is possible to produce the flanges with round or square platform.
Part VI. Composite post insulators Part VI. Composite post insulators
WWW.ENERGY-21.RU �0Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»�110, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
ParameterOSK
20-�5-Г011-2 UHL 1
OSK20-�5-Г04-2 UHL 1
OSK20-�5-Г04-3 UHL 1
OSK20-�5-Г05-1 UHL 1
OSK20-�5-Д02-3 UHL 1
OSK20-�5-Е06-3 UHL 1
GOST Р 52082-2003; TU 3493-017-21639232-2008
Nominal voltage, kV 35
Spacing Н, mm 500 560 570
Insulating length L, mm 365 422 432
Leakage distance, not less, cm 95 116 75 116
Weight, not more, kg 18,0 29 20,0 21,5
Pollution level acc. PUE- edition 7-cl.1.9; SТО 56947007-29.240.068-2011 2 3 1 3
Specified mechanical failing bending load, not less, kN 20
Specified failing rotational torque, not less kNxm 1,0
Withstand voltage industrial frequency in a dry, kV 95
Withstand voltage industrial frequency in the rain, kV, not less 80
50% discharge voltage of industrial frequency in polluted and wet conditions, not less, kV
42
Withstand voltage lightning impulse, not less, kV 190
Fitting dimension (upper) D/D1 (bottom)
Ø140(□99)/Ø140(□99)
Ø225(□160)/Ø225(□160)
Ø225(□160)/Ø254(□180)
Ø127(□90)/Ø127(□90)
Ø140(□99)/Ø198(□140)
Fitting holes n/d upper / n/d1 bottom
4М16/4Ø18 4Ø18/4Ø18 4М12/
4М124М12/4Ø18
Porcelain analogue under agreement
ИОС 35-1000
ИОС 35-2000
С-20-200-II
ИОС35-
500-03
Fig No. 1 Fig. 1
Under agreement with the customer it is possible to produce the flanges with round or square platform.
Part VI. Composite post insulators Part VI. Composite post insulators
WWW.ENERGY-21.RU �2Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»��10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
ParameterOSK
10-110-А01-2 UHL 1
OSK10-110-А02-2 UHL 1
OSK10-110-B02-2 UHL 1
OSK10-110-B0�-2 UHL 1
OSK10-110-B0�1-2 UHL 1
OSK10-110-B04-2 UHL 1
GOST Р 52082-2003; TU 3493-017-21639232-2008
Nominal voltage, kV 110
Spacing Н, mm 1020 1050
Insulating length L, mm 875 905
Leakage distance, not less, cm 280
Weight, not more, kg 22,0 23,0 25,5 27,0 25,5
Pollution level acc. PUE- edition 7-cl. 1.9;STO 56947007-29.240.068-2011 2
Specified mechanical failing bending load, not less, kN 10
Specified failing rotational torque, not less kNxm 1,0
Withstand voltage of industrial frequency in a dry and in the rain, kV, not less
230
50% discharge voltage of industrial frequency in polluted and wet conditions, not less, kV
110
Withstand voltage lightning impulse, not less, kV 450
Fitting dimension (upper) D/D1 (bottom)
Ø127(□90)/Ø127(□90)
Ø127(□90)/Ø178(□126)
Ø170(□120)/Ø225(□160)
Ø141(□100)/Ø225(□160)
Fitting holes n/d upper / n/d1 bottom
4М16/4М16 4М16/4Ø18 4Ø18/
4Ø184М12/4Ø18
4М12/4Ø18
Porcelain analogue ИОС 110-300С6-450-II-02
under agree-ment
ИОС 110-400
УСТ-110
Fig No. 1Fig. 1
Under agreement with the customer it is possible to produce the flanges with round or square platform.
Part VI. Composite post insulators Part VI. Composite post insulators
WWW.ENERGY-21.RU �4Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»�510, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
ParameterOSK
10-110-B021-2 UHL 1
OSK10-110-B024-2 UHL 1
OSK10-110-B05-2 UHL 1
OSK10-110-B06-2 UHL 1
OSK10-110-B09-2 UHL 1
OSK10-110-B10-2 UHL 1
GOST Р 52082-2003; TU 3493-017-21639232-2008
Nominal voltage, kV 110
Spacing Н, mm 1050
Insulating length L, mm 905
Leakage distance, not less, cm 280
Weight, not more, kg 25,0 28,0 24,5 28,0
Pollution level acc. PUE- edition 7-cl. 1.9;STO 56947007-29.240.068-2011 2
Specified mechanical failing bending load, not less, kN 10
Specified failing rotational torque,not less kNxm 1,0
Withstand voltage of industrial frequency in a dry and in the rain,kV, not less
230
50% discharge voltage of industrial frequency in polluted and wet conditions, not less, kV
110
Withstand voltage lightning impulse, not less, kV 450
Fitting dimension (upper) D/D1 (bottom)
Ø96(□68)/Ø178(□126)
Ø96(□68)/ Ø254(□180)
Ø225(□160)/ Ø225(□160)
Ø225(□160)/ Ø254(□180)
Ø127(□90)/ Ø225(□160)
Ø225(□160)/Ø254(□180)
Fitting holes n/d upper / n/d1 bottom
4М12/4Ø18
4Ø18/4Ø18
4М16/4Ø18
4Ø18/8Ø18
Porcelain analogue For bus supports
under agreement
For bus supports
under agree-ment
Fig No. 1Fig. 1
Under agreement with the customer it is possible to produce the flanges with round or square platform.
Part VI. Composite post insulators Part VI. Composite post insulators
WWW.ENERGY-21.RU �6Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»�710, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
ParameterOSK
10-110-V05-2 UHL 1
OSK10-110-V06-2 UHL 1
OSK10-110-V07-2 UHL 1
OSK10-110-G05-� UHL 1
OSK10-110-G09-� UHL 1
GOST Р 52082-2003; TU 3493-017-21639232-2008
Nominal voltage, kV 110
Spacing Н, mm 1100 1220
Insulating length L, mm 955 1075
Leakage distance, not less, cm 300 340
Weight, not more, kg 37,0 46,0 34,0 30,0
Pollution level acc. PUE- edition 7-cl.1.9;STO 56947007-29.240.068-2011 2 3
Specified mechanical failing bending load, not less , kN 10
Specified failing rotational torque, not less kNxm 1,0
Withstand voltage of industrial frequency in a dry and in the rain,kV, not less
230
50% discharge voltage of industrial frequency in polluted and wet conditions, not less, kV
110
Withstand voltage lightning impulse, not less, kV 480 550
Fitting dimension (upper) D/D1 (bottom)
Ø225(□160)/Ø225(□160)
Ø225(□160)/ Ø254(□180)
Ø254(□180)/ Ø275(□194)
Ø225(□160)/ Ø225(□160)
Ø127(□90)/Ø225(□160)
Fitting holes n/d upper / n/d1 bottom
4Ø18/4Ø18
4Ø18/4Ø20
4Ø18/4Ø18
4М16/8Ø18
Porcelain analogue ИОС 110-600
ИОС 110-1250
ИОС 110-2000 С 500-II
Fig No. 1
Fig. 1
Under agreement with the customer it is possible to produce the flanges with round or square platform.
5 За
к. 2
130
Part VI. Composite post insulators Part VI. Composite post insulators
WWW.ENERGY-21.RU ��Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»�910, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
ParameterOSK
10-110-B02-� UHL 1
OSK10-110-B0�1-� UHL 1
OSK10-110-B04-� UHL 1
OSK10-110-V05-� UHL 1
OSK10-110-G091-� UHL 1
OSK10-110-G10-� UHL 1
GOST Р 52082-2003; TU 3493-017-21639232-2008
Nominal voltage, kV 110
Spacing Н, mm 1050 1100 1220
Insulating length L, mm 905 955 1075
Leakage distance, not less, cm 360 370 340
Weight, not more, kg 27,0 32,0 30,0 36,0
Pollution level acc. PUE- edition 7-cl.1.9;STO 56947007-29.240.068-2011 2 3
Specified mechanical failing bending load, not less, kN 10
Specified failing rotational torque, not less kNxm 1,0
Withstand voltage of industrial frequency in a dry and in the rain,kV, not less
230
50% discharge voltage of industrial frequency in polluted and wet conditions, not less, kV
110
Withstand voltage lightning impulse, not less, kV 450 480 550
Fitting dimension (upper) D/D1 (bottom)
Ø127(□90)/Ø178(□126)
Ø170(□120)/Ø225(□160)
Ø141(□100)/ Ø225(□160)
Ø225(□160)/ Ø225(□160)
Ø127(□90)/ Ø174(□123)
Ø225(□160)/ Ø254(□180)
Fitting holes n/d upper / n/d1 bottom
4М16/4Ø18
4М12/4Ø18
4М12/4Ø18
4Ø18/4Ø18
4М12/4Ø18
4Ø18/8Ø18
Porcelain analogue under agreement
Fig No. 1
Fig. 1
Under agreement with the customer it is possible to produce the flanges with round or square platform.
5*
Part VI. Composite post insulators Part VI. Composite post insulators
WWW.ENERGY-21.RU 90Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»9110, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
ParameterOSK
�0-110-B11-2 UHL 1
OSK20-110-V06-2 UHL 1
OSK20-110-V07-2 UHL 1
OSK20-110-V11-2 UHL 1
OSK20-110-G05-2 UHL 1
OSK20-110-G10-2 UHL 1
GOST Р 52082-2003; TU 3493-017-21639232-2008
Nominal voltage, kV 110
Spacing Н, mm 1050 1100 1220
Insulating length L, mm 860 930 1010
Leakage distance, not less, cm 280
Weight, not more, kg 58,0 61,0 63,0
Pollution level acc. PUE- edition 7-cl. 1.9;STO 56947007-29.240.068-2011 2
Specified mechanical failing bending load, not less, kN 30 20
Specified failing rotational torque, not less kNxm 1,0
Withstand voltage of industrial frequency in a dry and in the rain, kV, not less
230
50% discharge voltage of industrial frequency in polluted and wet conditions, not less, kV
110
Withstand voltage lightning impulse, not less, kV 450 480 550
Fitting dimension(upper) D/D1 (bottom)
Ø225(□160)/ Ø275(□194)
Ø225(□160)/ Ø254(□180)
Ø254(□180)/ Ø275(□194)
Ø225(□160)/ Ø275(□194)
Ø225(□160)/ Ø225(□160)
Ø225(□160)/ Ø254(□180)
Fitting holesn/d upper / n/d1 bottom
8Ø18/8Ø18
4Ø18/4Ø18
4Ø18/4Ø20
8Ø18/8Ø18
4Ø18/4Ø18
4Ø18/8Ø18
Porcelain analogue under agreement
Fig No. 1
Fig. 1
Under agreement with the customer it is possible to produce the flanges with round or square platform.
Part VI. Composite post insulators Part VI. Composite post insulators
WWW.ENERGY-21.RU 92Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»9�10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
ParameterOSK
�0-110-B11-� UHL 1
OSK20-110-V05-� UHL 1
OSK20-110-V06-� UHL 1
OSK20-110-V07-� UHL 1
OSK20-110-G05-� UHL 1
OSK20-110-G10-� UHL 1
GOST Р 52082-2003; TU 3493-017-21639232-2008
Nominal voltage, kV 110
Spacing Н, mm 1050 1100 1220
Insulating length L, mm 860 930 1010
Leakage distance, not less, cm 315
Weight, not more, kg 60,0 63,0 70,0 73,0
Pollution level acc. PUE- edition 7-cl.1.9; SТО 56947007-29.240.068-2011 3
Specified mechanical failing bending load, not less, kN 30 20
Specified failing rotational torque, not less kNxm 1,0
Withstand voltage of industrial frequency in a dry and in the rain, kV, not less
230
50% discharge voltage of industrial frequency in polluted and wet conditions, not less, kV
110
Withstand voltage lightning impulse, not less, kV 450 480 550
Fitting dimension (upper) D/D1 (bottom)
Ø225(□160)/ Ø275(□194)
Ø225(□160)/ Ø225(□160)
Ø225(□160)/ Ø254(□180)
Ø254(□180)/ Ø275(□194)
Ø225(□160)/ Ø225(□160)
Ø225(□160)/ Ø254(□180)
Fitting holes n/d upper / n/d1 bottom
8Ø18/8Ø18 4Ø18/4Ø18 4Ø18/
4Ø204Ø18/4Ø18
4Ø18/8Ø18
Porcelain analogue under agreement
ИОС 100-2000
ИОС 100-
2000-01under
agreement
Fig No. 1 Fig. 1
Under agreement with the customer it is possible to produce the flanges with round or square platform.
Part VI. Composite post insulators Part VI. Composite post insulators
WWW.ENERGY-21.RU 94Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»9510, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
ParameterOSK
16-150-А05-2 UHL 1
OSK16-150-А06-2 UHL 1
OSK16-150-А05-3 UHL 1
OSK16-150-А06-3 UHL 1
OSK16-150-V06-2 UHL 1
OSK16-150-V09-2 UHL 1
GOST Р 52082-2003; TU 3493-017-21639232-2008
Nominal voltage, kV 150
Spacing Н, mm 1600 1560
Insulating length L, mm 1400 1360
Leakage distance, not less, cm 400 450 390
Weight, not more, kg 71,0 74,0 69,0 63,0
Pollution level acc. PUE- edition 7-cl.1.9; SТО 56947007-29.240.068-2011 2 3 2
Specified mechanical failing bending load, not less, kN 16
Specified failing rotational torque, not less kNxm 1,0
Withstand voltage of industrial frequency in a dry and in the rain, kV, not less
300
50% discharge voltage of industrial frequency in polluted and wet conditions, not less, kV
150
Withstand voltage lightning impulse, not less, kV 680 650
Fitting dimension (upper) D / D1 (bottom)
Ø225(□160)/ Ø225(□160)
Ø225(□160)/ Ø254(□180)
Ø225(□160)/ Ø225(□160)
Ø225(□160)/ Ø254(□180)
Ø225(□160)/ Ø254(□180)
Ø127(□ 90)/ Ø225(□160)
Fitting holes n/d upper / n/ d1 bottom 4Ø18/4Ø18 4М16/4Ø18
Porcelain analogue under agreementFig No. 1
Fig. 1
Under agreement with the customer it is possible to produce the flanges with round or square platform.
Part VI. Composite post insulators Part VI. Composite post insulators
WWW.ENERGY-21.RU 96Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»9710, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
ParameterOSK
�-150-B024-2 UHL 1
OSK�-150-B09-2 UHL 1
OSK�-220-B024-2 UHL 1
OSK�-220-B09-2 UHL 1
OSK�-220-Е093-2 UHL 1
GOST Р 52082-2003; TU 3493-017-21639232-2008
Nominal voltage, kV 150 220
Spacing Н, mm 1600 2090 2320
Insulating length L, mm 1425 1812 1990
Leakage distance, not less, cm 340 570 640
Diameter of screen ØDЭ, mm – 345
Weight, not more, kg 42,0 46,0 50,0 53,0 63,0
Pollution level acc. PUE- edition 7-cl.1.9; SТО 56947007-29.240.068-2011 2
Specified mechanical failing bending load, not less, kN 8
Specified failing rotational torque, not less kNxm 1,0
Withstand voltage of industrial frequency in a dry and in the rain, kV, not less 300 440
50% discharge voltage of industrial frequency in polluted and wet conditions, not less, kV
150 220
Withstand voltage lightning impulse, not less, kV 680 950 1050
Fitting dimension (upper) D / D1 (bottom)Ø96
(□68)/Ø254(□180)
Ø96(□68)/Ø225(□160)
Ø96(□68)/Ø254(□180)
Ø96(□68)/Ø225(□160)
Ø96(□68)/Ø503(□356)
Fitting holes n/d upper / n/ d1 bottom 4М12/4Ø18
4М12/4Ø23
Porcelain analogue For bus supports
Fig No. 1 2 3 Fig. 1 Fig. 2 Fig. 3
Under agreement with the customer it is possible to produce the flanges with round or square platform.
Part VI. Composite post insulators Part VI. Composite post insulators
WWW.ENERGY-21.RU 9�Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»9910, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
OSK12,5-220-
А012-2 UHL 1
OSK 12,5-220-
А05-2 UHL 1
OSK12,5-220-
А09-2 UHL 1
OSK12,5-220-
А10-2 UHL 1
OSK12,5-220-
B05-2 UHL 1
OSK12,5-220-
B06-2 UHL 1
GOST Р 52082-2003; TU 3493-017-21639232-2008Nominal voltage, kV 220Spacing Н, mm 2100 2200Insulating length L, mm 1860 1960Leakage distance, not less, cm 575 600Diameter of screen ØDЭ, mm 370Weight, not more, kg 87,0 86,0 84,0 90,0 89,0 93,0
Pollution level acc. PUE- edition 7-cl.1.9; SТО 56947007-29.240.068-2011 2
Specified mechanical failing bending load, not less, kN 12,5
Specified failing rotational torque, not less kNxm 1,0
Withstand voltage of industrial frequency in a dry and in the rain, kV, not less
440
50% discharge voltage of industrial frequency in polluted and wet conditions, not less, kV
220
Withstand voltage lightning impulse, not less, kV 950 980
Fitting dimension (upper) D/D1 (bottom)
Ø127(□90)/ Ø300(□212)
Ø225(□160)/ Ø225(□160)
Ø127(□90)/ Ø225(□160)
Ø225(□160)/ Ø254(□180)
Ø225(□160)/ Ø225(□160)
Ø225(□160)/ Ø254(□180)
Fitting holes n/d upper / n/d1 bottom
4М16/4Ø18
4Ø18/4Ø18
4М16/4Ø18
4Ø18/8Ø18
4Ø18/4Ø18
4Ø18/4Ø18
Porcelain analogueunder agree-ment
С6-950-II УХЛ
С8-950-II УХЛ
under agree-ment
ИОС 110-1250
Fig No. 1 2 1 2
Part VI. Composite post insulators Part VI. Composite post insulators
Fig. 1
Under agreement with the customer it is possible to produce the flanges with round or square platform.
Fig. 2
WWW.ENERGY-21.RU 100Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»10110, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
OSK12,5-220-
А05-3 UHL 1
OSK12,5-220-
А09-3 UHL 1
OSK12,5-220-
А10-3 UHL 1
OSK12,5-220-
А11-3 UHL 1
OSK12,5-220-
Е06-3 UHL 1
OSK12,5-220-
Е09-3 UHL 1
GOST Р 52082-2003; TU 3493-017-21639232-2008Nominal voltage, kV 220Spacing Н, mm 2100 2300Insulating length L, mm 1860 1960Leakage distance, not less, cm 630 660Diameter of screen ØDЭ, mm 370Weight, not more, kg 89,0 87,0 93,0 100,0 102,0 100,0
Pollution level acc. PUE- edition 7-cl.1.9; SТО 56947007-29.240.068-2011 3
Specified mechanical failing bending load, not less, kN 12,5
Specified failing rotational torque, not less kNxm 1,0
Dry/wet short-term AC voltage test, not less, kV 440
Specified 50% flashover short-term AC voltage in polluted and wet conditions, not less, kV
220
Full lightning impulse voltage test, not less, kV 950 1050
Fitting dimension(upper) D/D1 (bottom)
Ø225(□160)/ Ø225(□160)
Ø127(□90)/ Ø225(□160)
Ø225(□160)/ Ø254(□180)
Ø225(□160)/ Ø275(□194)
Ø225(□160)/ Ø254(□180)
Ø127(□90)/ Ø225(□160)
Fitting holes n/d upper / n/d1 bottom
4Ø18/4Ø18
4М16/4Ø18
4Ø18/8Ø18
8Ø18/8Ø18
4Ø18/4Ø18
4М16/4Ø18
Porcelain analogue С6-950-II УХЛ С8-950-II УХЛ under agreement
Fig No. 2 1 2 1
Part VI. Composite post insulators Part VI. Composite post insulators
Fig. 1
Under agreement with the customer it is possible to produce the flanges with round or square platform.
Fig. 2
WWW.ENERGY-21.RU 102Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»10�10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part VII.Composite bus supports
Reference designation of bus support(classification):
UHL – climatic performance acc, to GOST 15150;1 – category of installation – for outside operation
Pollution level acc. to PUE 7th edition, cl. 1.9;STO 56947007-29.240.068–2011
Modification index of bus support:Letter – spacing;Figures – coupling dimensions of bottom flange
10÷220 – nominal voltage (kV)
Dimension index for current-carrying parts: For tube – diameter, mm;For plain bus – thickness х width, mm;For conductors – diameter of conductors:
A – 9,6…11,0 mm;B – 15,2…24,5 mm;V – 24,5…28,0 mm;G – 28,5…37,5 mm;D – 37,7…46,0 mm.
Performance index of current-carrying parts:T – tube;Sh – bus;P – conductor.
Number of current-carrying parts P – composite
Sh – bussingO – support
Part VII. Composite bus supportsTU �49�-017-216�92�2-200�
Part VII. Composite bus supportsTU �49�-017-216�92�2-200�
Example of reference designation
Bussing support OShP-2PB-110-B09-2 UHL1 – composite support for nominal voltage of 110 kV, with modification of spacing «B» and coupl-ing dimensions of bottom flange «09», and clamp for double conductors with diameter from 15,2 mm to 24,5 mm, intended for operation in areas with the 2-nd level of pollution acc. to PUE 7-th edition, cl. 1.9; STO 56947007-29.240.068–2011, climatic performance УХЛ category of instal-lation 1 acc. to GOST 15150.
Bussing support OShP -1Т80-110-B09-2 UHL1 – composite support for nomi-nal voltage of 110 kV, with modification of spacing «B» and coupling dimensions of bottom flange «09», and clamp for the tube with di-ameter of 80 mm, intended for operation in areas with the 2-nd level of pol-lution acc. to PUE 7-th edition, cl. 1.9; STO 56947007-29.240.068–2011, climatic performance УХЛ category of installa-tion 1 acc. to GOST 15150.
General scope (application)
Composite bussing supports of outside installation are intended for fitting the current-carrying buses in switchgears of power stations and sub-stations of AC voltage of 10–220 kV, power frequency up to 100 Hz. Cli-matic performance UHL; the 1st category of installation acc. to GOST 15150. The supports are intended for operation at height not more 1000 m above the sea level at air temperature from -60° С to +55° С. Carrying ele-ments of supports are the composite post insulators of core type for 10–220 kV, manufactured acc. to TU 3493-017-21639232-2008.
61 /2 З
ак. 2
130
WWW.ENERGY-21.RU 104Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»10510, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
OSh
P -1
PА(B
,V)-1
0-D
03-4
UH
L1
OSh
P -2
PА(B
,V)-1
0-D
03-4
UH
L1
OSh
P -1
PА(B
,V)-1
0-D
08-4
UH
L1
OSh
P -2
PА(B
,V)-1
0-D
08-4
UH
L1
Nominal voltage, kV 10
Spacing Н, mm 295
Leakage distance, cm 50
Admissible tension of conductor, kN 2
Number of conductors 1 2 1 2
Fitting dimension of bottom flange øD(□), mm Ø76 (□54) Ø140 (□99)
Number of and diameter of fitting holes n/ød, mm 4М12
Weight, not more, kg 4 5,8
Fig No. 1 2 3 4
Acc. to the agreement with the customer the bus support is manufac-tured with required modification of the clamp and performance of bottom flange with square or round platform.
Fig. 3 Fig. 4
61 /2*
Part VII. Composite bus supportsTU �49�-017-216�92�2-200�
Part VII. Composite bus supportsTU �49�-017-216�92�2-200�
Fig. 1 Fig. 2
WWW.ENERGY-21.RU 106Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»10710, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
OSh
P-1S
h10х
120-
10-D
03-4
UH
L1
OSh
P-2S
h10х
120-
10-D
03-4
UH
L1
OSh
P-1S
hV10
х120
-10-
D03
-4 U
HL1
OSh
P-2S
hV10
х120
-10-
D03
-4 U
HL1
Nominal voltage, kV 10
Spacing Н, mm 295
Leakage distance, cm 50
Admissible tension of conductor, kN 2
Number of conductors 1 2 1 2
Fitting dimension of bottom lange øD(□), mm Ø76 (□54)
Number of and diameter of fitting holes n/ød, mm 4М12
Weight, not more, kg 6,2
Fig No. 1 2 3 4
Part VII. Composite bus supportsTU �49�-017-216�92�2-200�
Part VII. Composite bus supportsTU �49�-017-216�92�2-200�
Acc. to the agreement with the customer the bus support is manufac-tured with required modification of the clamp and performance of bottom flange with square or round platform.
Fig. 3 Fig. 4
Fig. 1 Fig. 2
WWW.ENERGY-21.RU 10�Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»10910, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
OSh
P-1P
А(B
,V)-3
5-B
023-
2 U
HL1
OSh
P -2
PА(B
,V)-3
5-B
023-
2 U
HL1
OSh
P-1P
А(B
,V)-1
10-B
021-
2 U
HL1
OSh
P -2
PА(B
,V)-1
10-B
021-
2 U
HL1
OSh
P-1P
А(B
,V)-1
10-B
024-
2 U
HL1
OSh
P -2
PА(B
,V)-1
10-B
024-
2 U
HL1
Nominal voltage, kV 35 110
Spacing Н, mm 455 1070
Leakage distance, cm 95 280
Admissible tension of conductor, kN 2
Number of conductors 1 2 1 2 1 2
Fitting dimension of bottom flange øD(□), mm Ø127 (□90) Ø178 (□126) Ø254 (□180)
Number of and diameter of fitting holes n/ød, mm 4Ø13 4Ø18
Weight, not more, kg 8,5 25 28
Fig No. 1 2 1 2 1 2
Acc. to the agreement with the customer the bus support is manufac-tured with required modification of the clamp and performance of bottom flange with square or round platform.
Part VII. Composite bus supportsTU �49�-017-216�92�2-200�
Part VII. Composite bus supportsTU �49�-017-216�92�2-200�
Fig. 1 Fig. 2
WWW.ENERGY-21.RU 110Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»11110, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
7 За
к. 2
130
Part VII. Composite bus supportsTU �49�-017-216�92�2-200�
Part VII. Composite bus supportsTU �49�-017-216�92�2-200�
Acc. to the agreement with the customer the bus support is manufac-tured with required modification of the clamp and performance of bottom flange with square or round platform.
Fig. 1 Fig. 2
Parameter
OSh
P-1P
А(B
,V)-1
10-B
09-2
UH
L1
OSh
P-2P
А(B
,V)-1
10-B
09-2
UH
L1
OSh
P-1P
А(B
,V)-1
50-B
09-2
UH
L1
OSh
P -2
PА(B
,V)-1
50-B
09-2
UH
L1
OSh
P-1P
А(B
,V)-1
50-B
024-
2 U
HL1
OSh
P-2P
А(B
,V)-1
50-B
024-
2 U
HL1
Nominal voltage, kV 110 150
Spacing Н, mm 1070 1625
Leakage distance, cm 280 340
Admissible tension of conductor, kN 2
Number of conductors 1 2 1 2 1 2
Fitting dimension of bottom flange øD(□), mm Ø225 (□160) Ø254 (□180)
Number of and diameter of fitting holes n/ød, mm 4Ø18
Weight, not more, kg 27 44 48
Fig No. 1 2 1 2 1 2
WWW.ENERGY-21.RU 112Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»11�10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Acc. to the agreement with the customer the bus support is manufac-tured with required modification of the clamp and performance of bottom flange with square or round platform.
Fig. 3 Fig. 4
Parameter
OSh
P-1P
B(V
,G,D
)-220
-А09
-2 U
HL1
OSh
P-2P
B(V
,G,D
)-220
-А09
-2 U
HL1
OSh
P-1P
B(V
,G,D
)-220
-А02
4-2
UH
L1
OSh
P-2P
B(V
,G,D
)-220
-А02
4-2
UH
L1
OSh
P-1P
B(V
,G,D
)-220
-Е09
3-2
UH
L1
OSh
P-2P
B(V
,G,D
)-220
-Е09
3-2
UH
L1
Nominal voltage, kV 220
Spacing Н, mm 2125 2355
Leakage distance, cm 575 640
Admissible tension of conductor, kN 2
Number of conductors 1 2 1 2 1 2
Fitting dimension of bottom flange øD(□), mm Ø225 (□160) Ø254 (□180) Ø503 (□356)
Number of and diameter of fitting holes n/ød, mm 4Ø18 4Ø23
Weight, not more, kg 52 55 65
Fig No. 3 4 3 4 5 6
Part VII. Composite bus supportsTU �49�-017-216�92�2-200�
Part VII. Composite bus supportsTU �49�-017-216�92�2-200�
WWW.ENERGY-21.RU 114Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»11510, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Acc. to the agreement with the customer the bus support is manufac-tured with required modification of the clamp and performance of bottom flange with square or round platform.
Fig. 5
Acc. to the agreement with the customer the bus support is manufac-tured with required modification of the clamp and performance of bottom flange with square or round platform.
Fig. 6
Part VII. Composite bus supportsTU �49�-017-216�92�2-200�
Part VII. Composite bus supportsTU �49�-017-216�92�2-200�
WWW.ENERGY-21.RU 116Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»11710, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part VIII.Composite bushing
General scope (application)
Polymer bushing is intended for the connection of current-carrying units in elec-trical apparatus and switchgears of power stations and substa-tions of AC nominal voltage of 10 kV, power frequency up to 100 Hz. Cli-matic performance of outer part is UHL, modification of performance 1 acc. to GOST 15150. Maximum of the ambi-ent temperature should not exceed 65° C when installed in complete switchgears and 80° C when installed in current leads.
Minimum of ambient temperature is -55° C.Insulators are designed to operate at 1,000 meter above sea level.
Part VIII. Composite bushing TU �49�-019-216�92�2-2010; TU �49�-024-216�92�2-2010
Designation of insulator(classification):
UHL – climatic performance acc. to GOST 15150; 1 – installation category of outer part of in-sulator – for outdoor application
01 and etc. – modification of bus
A, B – modification of flange: А – oval; B – square
7,5; �; 12,5 – minimum bending strength, kN
600; 2000 – nominal current, АU – stretched10 – nominal voltage, kVP – compositeP – bushingI – insulator
Example of designationInsulator IPP-10-630-8-А UHL1 TU 3493-019-21639232-2010 is a composite
bushing with nominal voltage of 10 kV and nominal current of 630 A, minimum bending strength is 8 kN, with oval modification of flange. Bushing is intended for climatic performance UHL, category 1 for the outer part of insulator.
Part VIII. Composite bushing TU �49�-019-216�92�2-2010; TU �49�-024-216�92�2-2010
7*
WWW.ENERGY-21.RU 11�Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»11910, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
IPP-
10-6
�0-7
,5-B
UH
L1
IPP-
10У-
630-
7,5-
B U
HL1
IPP-
10-6
�0-�
-A U
HL1
IPP-
10-6
�0-�
-B U
HL1
Specified mechanical bending load , no less, kN 7,5 8
Nominal voltage, kV 10
Nominal current, А 630
Leakage distance of outer part of insulator, cm, no less 31 44 31
Leakage distance of inner part of insulator, cm, no less 20 20
Overall size of insulator L, mm 620 700 576
Length of the inner part of insulator, L1, mm 343 340 283
Puncture voltage in insulating medium, kV, no less 80
Full lightning impulse voltage test, kV 75
Dry specified five-minutes AC voltage, kV, no less 42
Wet specified five-minutes AC voltage, kV, no less 28
Wet average flashover voltage, kV, no less 40
Weight, not more, kg 4,2 4,5 4,2
Pollution category (Rules for the Design and Operation of Electrical Installations, 7th edition, item. 1.9) STO 56947007-29.240.068-2011 ОАО «FSK ЕES»
2 4 2
Fig. No. 1 2 1
Fig. 1 Fig. 2
Part VIII. Composite bushing TU �49�-019-216�92�2-2010; TU �49�-024-216�92�2-2010
Part VIII. Composite bushing TU �49�-019-216�92�2-2010; TU �49�-024-216�92�2-2010
WWW.ENERGY-21.RU 120Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»12110, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
IPP-
10-2
000-
12,5
-B U
HL
1
IPP-
10У-
2000
-12,
5-B
UH
L1
IPP-
10У-
2000
-12,
5-B
-01
UH
L1
Specified mechanical bending load, no less, kN 12,5
Nominal voltage, kV 10
Nominal current, А 2000
Leakage distance of outer part of insulator, cm, no less 37 62
Leakage distance of inner part of insulator, cm, no less 22
Overall size of insulator L, mm 685 798
Length of the inner part of insulator, L1, mm 380
Interface of fitting holes, C, mm 60
Distance between the busses, b, mm 8 10
Thickness of the bus, s, mm 8 10 8
Puncture voltage in insulating medium, kV, no less 80
Full lightning impulse voltage test, kV 75
Dry specified five-minutes AC voltage, kV, no less 42
Wet specified five-minutes AC voltage, kV, no less 28
Wet average flashover voltage, kV, no less 54
Weight, not more, kg 11,5 14 15
Pollution category (Rules for the Design and Operation of Electrical Installations, 7th edition, item. 1.9) STO 56947007-29.240.068-2011 ОАО «FSK ЕES»
2 4
Fig. No. 3 Fig. 3
Part VIII. Composite bushing TU �49�-019-216�92�2-2010; TU �49�-024-216�92�2-2010
Part VIII. Composite bushing TU �49�-019-216�92�2-2010; TU �49�-024-216�92�2-2010
WWW.ENERGY-21.RU 122Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»12�10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part IX.Composite pin insulators
for traction linesComposite pin insulators for traction lines are certified by
FBU «RS FZHT»
General scope (application)
Composite pin insulators are intended for insulating and fixture of traction line equipment with AC voltage of 25 kV, power frequency to 100 Hz and DC voltage of 3 kV in the areas with various level of pollution. Climatic performance is UHL, cat-egory 1 of installation acc. to GOST 15150, the insulators meet the requirements of GOST 15543.1.
The insulators with index «d» are subjected to additional testing to confirm the long term operation. Insulators with index «k» are manufactured with apply of glass fiber core with anti acid corrosion property.
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
Reference designation (classification)
anti acid corrosion Index confirming the long term guarantee period of operation
Designation of type of a end fitting: «G» – Socket; «U» – Tongue; «P» – Ball. For the only designation of a letter are not specified
0,6; 0,95… – leakage distance in mm acc. to GOST 30284
�; 10; 25 – nominal voltage of traction line in kV
�0; 70; 120 – class of insulator: specified mechanical failing tensile load in kN
p –– index: cast-solid ribbed protective body
K – material of protective body of insulating part:silicon rubber
P – composite
S – design: pin
P – application:K – cantilever;N – tension;P – suspension;F – fixation.
Example of reference designation
Insulator NSPKr 120-3/0.6-d-к TU 3493-008-21639232-02 – composite pin insulator with ribbed protective insulating body made from silicon rubber, class 120 for nominal voltage of 3 kV with leakage distance of 0,6 m, with long term guarantee period of operation and anti acid corrosion property.
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
WWW.ENERGY-21.RU 124Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»12510, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
PSPK
r 70-
3/0.
6-G
P(-d
-к)
PSPK
r 70-
3/0.
6-G
U(-d
-к)
PSPK
r 70-
25/0
.95-
GP(
-d-к
)
PSPK
r 70-
25/0
.95-
GU
(-d-к
)
PSPK
r 70-
25/1
.1-G
P(-d
-к)
PSPK
r 70-
25/1
.1-G
U(-d
-к)
PSPK
r 70-
25/1
.5-G
P(-d
-к)
PSPK
r 70-
25/1
.5-G
U(-d
-к)
Nominal voltage, kV 3 25
Spacing Н, mm 350 450 620 730
Insulating length L, mm 190 250 420 530
Leakage distance, not less, сm 60 95 110 150
Weight, not more, kg 1,85 2,2 2,5 3,0
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 50 10 20 50
Specified mechanical failing tensile load,not less, kN 70
Wet specified 1 minute power voltage test, kV: – in horizontal position – in vertical position
4028
10070
140100
200140
Power-frequency withstand voltage, not less, kV 15 40
Specified lightning impulse voltage, not less, kV 90 170 200 240
Fig No. 1 2 1 2 1 2 1 2
Fig. 1 Fig. 2
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
WWW.ENERGY-21.RU 126Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»12710, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
PSPK
r 120
-25/
0.95
-GP(
-d-к
)
PSPK
r 120
-25/
0.95
-GU
(-d-к
)
PSPK
r 120
-25/
1.1-
GP(
-d-к
)
PSPK
r 120
-25/
1.1-
GU
(-d-к
)
PSPK
r 120
-25/
1.5-
GP(
-d-к
)
PSPK
r 120
-25/
1.5-
GU
(-d-к
)
Nominal voltage, kV 25
Spacing Н, mm 450 620 730
Insulating length L, mm 250 420 530
Leakage distance, not less, сm 95 110 150
Weight, not more, kg 2,2 2,5 3,0
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 10 20 50
Specified mechanical failing tensile load, not less, kN 120
Wet specified 1 minute power voltage test, kV: – in horizontal position – in vertical position
10070
140100
200140
Power-frequency withstand voltage, not less, kV 40
Specified lightning impulse voltage, not less, kV 170 200 240
Fig No. 1 2 1 2 1 2
Fig. 1 Fig. 2
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
WWW.ENERGY-21.RU 12�Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»12910, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
NSP
Kr 1
20-3
/0.6
(-d-к
)
NSP
Kr 1
20-3
/0.8
(-d-к
)
NSP
Kr 1
20-2
5/0.
95(-d
-к)
NSP
Kr 1
20-2
5/1.
1(-d
-к)
NSP
Kr 1
20-2
5/1.
2(-d
-к)
NSP
Kr 1
20-2
5/1.
5(-d
-к)
Nominal voltage, kV 3,0 25
Spacing Н, mm 430 528 570 640 672 770
Insulating length L, mm 229 327 369 439 471 569
Leakage distance, not less, сm 60 80 95 110 120 150
Weight, not more, kg 1,8 2,5 2,3 2,3 2,5 2,7
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 50 10 20 50
Specified mechanical failing tensile load, not less, kN 120
Wet specified 1 minute power voltage test, kV: – in horizontal position – in vertical position
4028
7050
10070
140100
200140
Power-frequency withstand voltage, not less, kV 15 20 40
Specified lightning impulse voltage, not less, kV 90 140 170 200 240
Fig No. 3
Fig. 3
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
WWW.ENERGY-21.RU 1�0Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»1�110, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
FSPK
r 70-
3/0.
6(-d
-к)
FSPK
r 70-
10/0
.5(-d
-к)
FSPK
r 70-
25/0
.95(
-d-к
)
FSPK
r 70-
25/1
.1(-d
-к)
FSPK
r 70-
25/1
.5(-d
-к)
Nominal voltage, kV 3,0 10 25
Spacing Н, mm 420 324 560 620 720
Insulating length L, mm 197 159 337 397 497
Leakage distance, not less, сm 60 50 95 110 150
Weight, not more, kg 2,9 2,2 3,5 4,1 4,5
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 50 10 20 50
Specified mechanical failing tensile load, not less, kN 70
Specified failing torque, not less, kNхm 3,5
Wet specified 1 minute power voltage test, kV: – in horizontal position – in vertical position
4028
–50
10070
140100
200140
Power-frequency withstand voltage, not less, kV 15 – 40
Specified lightning impulse voltage, not less, kV 90 170 200 240
Fig No. 4
Fig. 4
8 За
к. 2
130
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
WWW.ENERGY-21.RU 1�2Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»1��10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
FSPK
r 120
-3/0
,6(-d
-к)
FSPK
r 120
-25/
0,95
(-d-к
)
FSPK
r 120
-25/
1,1(
-d-к
)
FSPK
r 120
-25/
1,5(
-d-к
)
Nominal voltage, kV 3,0 25
Spacing Н, mm 420 560 620 720
Insulating length L, mm 185 325 385 485
Leakage distance, not less, сm 60 95 110 150
Weight, not more, kg 4,3 5,6 5,8 6,1
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 50 10 20 50
Specified mechanical failing tensile load, not less, kN 120
Specified failing torque, not less, kNхm 6,0
Wet specified 1 minute power voltage test, kV: – in horizontal position – in vertical position
4028
10070
140100
200140
Power-frequency withstand voltage, not less, kV 15 40
Specified lightning impulse voltage, not less, kV 90 170 200 240
Fig No. 4
Fig. 4
8*
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
WWW.ENERGY-21.RU 1�4Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»1�510, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
KSP
Kr 1
20-3
/0,6
(-d-к
)
KSP
Kr 1
20-2
5/0,
95(-d
-к)
KSP
Kr 1
20-2
5/1,
1(-d
-к)
KSP
Kr 1
20-2
5/1,
5(-d
-к)
Nominal voltage, kV 3,0 25
Spacing Н, mm 569 629 720
Insulating length L, mm 267 327 519
Leakage distance, not less, сm 60 110 160
Weight, not more, kg 6,8 7,2 8,2
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 50 10 20 50
Specified mechanical failing tensile load, not less, kN 120
Specified failing torque, not less, kNхm 6,0
Wet specified 1 minute power voltage test, kV: – in horizontal position – in vertical position
4028
10070
140100
200140
Power-frequency withstand voltage, not less, kV 15 40
Specified lightning impulse voltage, not less, kV 90 170 200 240
Fig No. 5 6
Fig. 5
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
Fig. 6
WWW.ENERGY-21.RU 1�6Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»1�710, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
NSP
K 1
20-3
/0.6
(-D-к
)
NSP
K 1
20-2
5/0.
8(-D
-к)
NSP
K 1
20-2
5/0.
9(-D
-к)
NSP
K 1
20-2
5/1.
2(-D
-к)
Nominal voltage, kV 3,0 25
Spacing Н, mm 830 1030 1130 1430
Insulating length L, mm 600 800 900 1200
Leakage distance, not less, сm 60 80 90 120
Weight, not more, kg 2,3 2,6 2,8 3,1
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 50 10 20
Specified mechanical failing tensile load, not less, kN 120
Wet specified 1 minute power voltage test, kV: – in horizontal position – in vertical position
4028
7050
10070
140100
Power-frequency withstand voltage, not less, kV 15 40
Specified lightning impulse voltage, not less, kV 90 140 170 200
Fig No. 7
Fig. 7
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
WWW.ENERGY-21.RU 1��Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»1�910, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Parameter
FSPK
r 30-
3/0.
33(-d
-к)
FSPK
r 30-
10/0
.39(
-d-к
)
Nominal voltage, kV 3,0 10
Spacing Н, mm 230 237
Insulating length L, mm 97 102
Leakage distance, not less, сm 33 39
Weight, not more, kg 1,3 1,5
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 50
Specified mechanical failing tensile load, not less, kN 30
Specified failing torque, not less, kNхm 0,8
Specified lightning impulse voltage, not less, kV 125
Fig. No. 8
Fig. 8
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
Part IX. Composite pin insulators for traction lines,GOST �02�4-2017, TU �494-00�-216�92�2-02
WWW.ENERGY-21.RU 140Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»14110, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Part X.Composite pin bird-protected insulators for traction lines
General scope (application)
Composite pin insulators are intended for insulating and fixture of traction line equipment with AC voltage of 25 kV, power frequency to 100 Hz and DC voltage of 3 kV in the areas with various level of pollution. Cli-matic performance is UHL, category 1 of installation acc. to GOST 15150, the insulators meet the require-ments of GOST 15543.1.
The main difference between bird-protected insulators and ordinary insu-lators is the increased insulating distance between the metal parts of the insulator and the higher length of leakage distance. At the same time, the discharge characteristics have increased, which significantly reduces the probability of overlap of the insula-tor due to external factors. The use of bird-protected insulators allows to increase the reliability and probability of trouble-free operation of the contact network. In vertical insulators it is possible to use a bird protection screen, which protects the entire insulator from the waste products of birds and prevents electric birds from striking through the droppings.
Reference designation (classification)
The designation of the modification of the insulator: «P» – bird-protected; «PZE» – with bird protection screenDesignation of type of a end fitting: «G» – Socket; «U»-Tongue; «P» – Ball. For the only designation of a letter are not specified
0,6; 0,95… – leakage distance in mm acc. to GOST 30284
�; 10; 25 – voltage of traction line in kV
70; 100; 120 – class of insulator:specified mechanical failing tensile load in kN
p – index: cast-solid ribbed protective body
K – material of protective body of insulating part:silicon rubberP – compositeS – design: pinP – application:
K – cantilever;N – tension;P – suspension;F – fixation.
Example of reference designation
Insulator NSPKr 120-25/1.6-P TU 37.90.12.110-030-21639232-2018 – com-posite pin bird-protected insulator with ribbed protective insulating body made from silicon rubber, class 120 for nominal voltage of 25 kV with leakage distance of 1,5 m.
WWW.ENERGY-21.RU 142Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»14�10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Fig. 1 Fig. 2
Parameter
PSPK
r 70-
�/0,
6-G
P-P
PSPK
r 70-
�/0,
6-G
U-P
PSPK
r 70-
25/0
,95-
GP-
P
PSPK
r 70-
25/0
,95-
GU
-P
PSPK
r 70-
25/1
,1-G
P-P
PSPK
r 70-
25/1
,1-G
U-P
PSPK
r 70-
25/1
,2-G
P-P
PSPK
r 70-
25/1
,2-G
U-P
PSPK
r 70-
25/1
,5-G
P-P
PSPK
r 70-
25/1
,5-G
U-P
Nominal voltage, kV 3 25
Spacing Н, mm 351 456 620 669 733
Insulating length L, mm 245 350 514 563 627
Leakage distance, not less, сm 73 102 144 159 174
Weight, not more, kg 2,2 2,5 2,8 2,9 3,0
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 50 10 20 50
Specified mechanical failing tensile load, not less, kN 70
Wet specified 1 minute power voltage test, kV: – in horizontal position – in vertical position
4028
100 70
140100
200140
Power-frequency withstand voltage, not less, kV 15 40
Specified lightning impulse voltage, not less, kV 90 170 200 240
Fig No. 1 2 1 2 1 2 1 2 1 2
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
WWW.ENERGY-21.RU 144Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»14510, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Fig. 1 Fig. 2
Parameter
PSPK
r 100
-�/0
.6-G
P-P
PSPK
r 100
-�/0
.6-G
U-P
PSPK
r 100
-25/
0.95
-GP-
P
PSPK
r 100
-25/
0.95
-GU
-P
PSPK
r 100
-25/
1.1-
GP-
P
PSPK
r 100
-25/
1.1-
GU
-P
PSPK
r 100
-25/
1.2-
GP-
P
PSPK
r 100
-25/
1.2-
GU
-P
PSPK
r 100
-25/
1.5-
GP-
P
PSPK
r 100
-25/
1.5-
GU
-P
Nominal voltage, kV 3 25
Spacing Н, mm 351 456 620 669 733
Insulating length L, mm 245 350 514 563 627
Leakage distance, not less, сm 73 102 144 159 174
Weight, not more, kg 2,2 2,5 2,8 2,9 3,0
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 50 10 20 50
Specified mechanical failing tensile load, not less, kN 100
Wet specified 1 minute power voltage test, kV: – in horizontal position – in vertical position
4028
100 70
140100
200140
Power-frequency withstand voltage, not less, kV 15 40
Specified lightning impulse voltage, not less, kV 90 170 200 240
Fig No. 1 2 1 2 1 2 1 2 1 2
WWW.ENERGY-21.RU 146Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»14710, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Fig. 1 Fig. 2
Parameter
PSPK
r 120
-�/0
,6-G
P-P
PSPK
r 120
-�/0
,6-G
U-P
PSPK
r 120
-25/
0,95
-GP-
P
PSPK
r 120
-25/
0,95
-GU
-P
PSPK
r 120
-25/
1,1-
GP-
P
PSPK
r 120
-25/
1,1-
GU
-P
PSPK
r 120
-25/
1,2-
GP-
P
PSPK
r 120
-25/
1,2-
GU
-P
PSPK
r 120
-25/
1,5-
GP-
P
PSPK
r 120
-25/
1,5-
GU
-P
Nominal voltage, kV 3 25
Spacing Н, mm 351 456 620 669 733
Insulating length L, mm 245 350 514 563 627
Leakage distance, not less, сm 73 102 144 159 174
Weight, not more, kg 2,2 2,5 2,8 2,9 3,0
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 50 10 20 50
Specified mechanical failing tensile load, not less, kN 120
Wet specified 1 minute power voltage test, kV: – in horizontal position – in vertical position
4028
100 70
140100
200140
Power-frequency withstand voltage, not less, kV 15 40
Specified lightning impulse voltage, not less, kV 90 170 200 240
Fig No. 1 2 1 2 1 2 1 2 1 2
WWW.ENERGY-21.RU 14�Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»14910, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Fig. 3 Fig. 4
Parameter
PSPK
r 70-
3/0.
6-G
P-PZ
E
PSPK
r 70-
3/0.
6-G
U-P
ZE
PSPK
r 70-
25/0
.95-
GP-
PZE
PSPK
r 70-
25/0
.95-
GU
-PZE
PSPK
r 70-
25/1
.1-G
P-PZ
E
PSPK
r 70-
25/1
.1-G
U-P
ZE
PSPK
r 70-
25/1
.2-G
P-PZ
E
PSPK
r 70-
25/1
.2-G
U-P
ZE
PSPK
r 70-
25/1
.5-G
P-PZ
E
PSPK
r 70-
25/1
.5-G
U-P
ZE
Nominal voltage, kV 3 25
Spacing Н, mm 351 456 620 669 733
Insulating length L, mm 245 350 514 563 627
Leakage distance, not less, сm 66 96 131 145 160
Weight, not more, kg 2,6 2,9 3,1 3,3 3,4
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 50 10 20 50
Specified mechanical failing tensile load, not less, kN 70
Wet specified 1 minute power voltage test, kV: – in horizontal position – in vertical position
4028
100 70
140100
200140
Power-frequency withstand voltage, not less, kV 15 40
Specified lightning impulse voltage, not less, kV 90 170 200 240
Fig No. 3 4 3 4 3 4 3 4 3 4
WWW.ENERGY-21.RU 150Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»15110, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Fig. 3 Fig. 4
Parameter
PSPK
r 100
-3/0
.6-G
P-PZ
E
PSPK
r 100
-3/0
.6-G
U-P
ZE
PSPK
r 100
-25/
0.95
-GP-
PZE
PSPK
r 100
-25/
0.95
-GU
-PZE
PSPK
r 100
-25/
1.1-
GP-
PZE
PSPK
r 100
-25/
1.1-
GU
-PZE
PSPK
r 100
-25/
1.2-
GP-
PZE
PSPK
r 100
-25/
1.2-
GU
-PZE
PSPK
r 100
-25/
1.5-
GP-
PZE
PSPK
r 100
-25/
1.5-
GU
-PZE
Nominal voltage, kV 3 25
Spacing Н, mm 351 456 620 669 733
Insulating length L, mm 245 350 514 563 627
Leakage distance, not less, сm 66 96 131 145 160
Weight, not more, kg 2,6 2,9 3,1 3,3 3,4
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 50 10 20 50
Specified mechanical failing tensile load, not less, kN 100
Wet specified 1 minute power voltage test, kV: – in horizontal position – in vertical position
4028
100 70
140100
200140
Power-frequency withstand voltage, not less, kV 15 40
Specified lightning impulse voltage, not less, kV 90 170 200 240
Fig No. 3 4 3 4 3 4 3 4 3 4
WWW.ENERGY-21.RU 152Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»15�10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Fig. 3 Fig. 4
Parameter
PSPK
r 120
-3/0
,6-G
P-PZ
E
PSPK
r 120
-3/0
,6-G
U-P
ZE
PSPK
r 120
-25/
0,95
-GP-
PZE
PSPK
r 120
-25/
0,95
-GU
-PZE
PSPK
r 120
-25/
1,1-
GP-
PZE
PSPK
r 120
-25/
1,1-
GU
-PZE
PSPK
r 120
-25/
1,2-
GP-
PZE
PSPK
r 120
-25/
1,2-
GU
-PZE
PSPK
r 120
-25/
1,5-
GP-
PZE
PSPK
r 120
-25/
1,5-
GU
-PZE
Nominal voltage, kV 3 25
Spacing Н, mm 351 456 620 669 733
Insulating length L, mm 245 350 514 563 627
Leakage distance, not less, сm 66 96 131 145 160
Weight, not more, kg 2,6 2,9 3,1 3,3 3,4
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 50 10 20 50
Specified mechanical failing tensile load, not less, kN 120
Wet specified 1 minute power voltage test, kV: – in horizontal position – in vertical position
4028
100 70
140100
200140
Power-frequency withstand voltage, not less, kV 15 40
Specified lightning impulse voltage, not less, kV 90 170 200 240
Fig No. 3 4 3 4 3 4 3 4 3 4
WWW.ENERGY-21.RU 154Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»15510, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Parameter
NSP
Kr 1
20-�
/0,6
-P
NSP
Kr 1
20-�
/0,�
-P
NSP
Kr 1
20-2
5/0,
�-P
NSP
Kr 1
20-2
5/0,
95-P
NSP
Kr 1
20-2
5/1,
1-P
NSP
Kr 1
20-2
5/1,
2-P
NSP
Kr 1
20-2
5/1,
5-P
Nominal voltage, kV 3,0 25
Spacing Н, mm 429 527 576 640 674 772
Insulating length L, mm 318 416 465 529 563 661
Leakage distance, not less, сm 88 116 130 146 159 186
Weight, not more, kg 2,2 2,5 2,6 2,8 2,9 3,1
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 50 10 20 50
Specified mechanical failing tensile load, not less, kN 120
Wet specified 1 minute power voltage test, kV: – in horizontal position – in vertical position
4028
7050
10070
140100
200140
Power-frequency withstand voltage, not less, kV 15 20 40
Specified lightning impulse voltage, not less, kV 90 140 170 200 240
Fig No. 5
Fig. 5
WWW.ENERGY-21.RU 156Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»15710, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Fig. 6
Parameter
FSPK
r 70-
�/0,
6-P
FSPK
r 70-
25/0
,95-
P
FSPK
r 70-
25/1
,1-P
FSPK
r 70-
25/1
,5-P
Nominal voltage, kV 3,0 25
Spacing Н, mm 423 558 620 717
Insulating length L, mm 291 424 488 585
Leakage distance, not less, сm 84 128 150 178
Weight, not more, kg 3,4 4,0 4,2 4,6
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 50 10 20 50
Specified mechanical failing tensile load, not less, kN 70
Wet specified 1 minute power voltage test, kV: – in horizontal position – in vertical position
4028
10070
140100
200140
Power-frequency withstand voltage, not less, kV 15 40
Specified lightning impulse voltage, not less, kV 90 170 200 240
Fig No. 6
WWW.ENERGY-21.RU 15�Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»15910, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Fig. 6
Parameter
FSPK
r 120
-�/0
.6-P
FSPK
r 120
-25/
0.95
-P
FSPK
r 120
-25/
1.1-
P
FSPK
r 120
-25/
1.5-
P
Nominal voltage, kV 3,0 25
Spacing Н, mm 420 557 618 715
Insulating length L, mm 287 426 485 584
Leakage distance, not less, сm 86 133 151 182
Weight, not more, kg 4,6 5,5 5,9 6,5
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 50 10 20 50
Specified mechanical failing tensile load, not less, kN 120
Specified failing torque, not less, kNхm 6,0
Wet specified 1 minute power voltage test, kV: – in horizontal position – in vertical position
4028
10070
140100
200140
Power-frequency withstand voltage, not less, kV 15 40
Specified lightning impulse voltage, not less, kV 90 170 200 240
Fig No. 6
WWW.ENERGY-21.RU 160Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»16110, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Part X. Composite pin bird-protected insulators for traction lines, GOST �02�4, TU 27.90.12.110-0�0-216�92�2-201�
Parameter
KSP
Kr 1
20-�
/,6-P
KSP
Kr 1
20-2
5/0,
95-P
KSP
Kr 1
20-2
5/1,
1-P
KSP
Kr 1
20-2
5/1,
5-P
Nominal voltage, kV 3,0 25
Spacing Н, mm 562 627 720
Insulating length L, mm 361 426 519
Leakage distance, not less, сm 108 133 160
Weight, not more, kg 7,2 7,7 8,2
Climatic performance UHL 1
At specified specific surface conductivity µСm, not less 50 10 20 50
Specified mechanical failing tensile load, not less, kN 120
Specified failing torque, not less, kNхm 6,0
Wet specified 1 minute power voltage test, kV: – in horizontal position – in vertical position
4028
10070
140100
200140
Power-frequency withstand voltage, not less, kV 15 40
Specified lightning impulse voltage, not less, kV 90 170 200 240
Fig No. 7
Fig. 7
WWW.ENERGY-21.RU 162Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»16�10, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Part XI.Line fittings
General scope (application):
The fittings are intended for assembly and adjusting the length of in-sulating sets for conductors and lightning wires of overhead transmission lines, for change the angle of coupling fittings with ball and socket connec-tion in the set.
The fittings are manufactured in climatic performance: UHL, installa-tion cat-egory 1 according to GOST 15150. The fittings meet the require-ments of GOST 13276, GOST 51177 and coupling dimensions correspond to GOST 11359 and GOST 27396.
Clevis SR-7-16 TU 3449-033-21639232-2009 – the clevis with mechanical failing load 70 kN (7 tf) and reference dimension of ball and socket connection of 16 mm.
Clevis SR-12-16 TU 3449-033-21639232-2009 – the clevis with mechanical failing load 120 kN (12 tf) and reference dimension of ball and socket connection of 16 mm.
Links PR-7-6B TU 3449-033-21639232-2009 – the straight link with mechanical failing load 70 kN (7 tf) with the capability to be used in inter-mediate attachment joint, the modification 6B.
Links PR-12-6B TU 3449-033-21639232-2009 – straight link having failing load 120 kN (12 tf) with opportunity using in intermediate attachment joint, the modifica-tion 6B.
Links PRV-7-1 TU 3449-033-21639232-2009 – intermediate twisted link with mechanical failing load 70kN (7 tf), the modification 1.
Links PRV-12-1 TU 3449-033-21639232-2009 – intermediate twisted link with mechanical failing load 120 kN (12 tf), modification 1.
Part XI. Line fittings, GOST 13276, GOST Р51177TU �449-0��-216�92�2-2009
Parameter
SR-7
-16
PR-7
-6B
PRV-
7-1
SR-1
2-16
PR-1
2-6B
PRV-
12-1
Clear height Н, mm 99 172 101 185
Spacing А, mm 65 130 65 140
Diameter of clevis tongue D, mm 42 45
Thickness of clevis tongue b, mm 16 22
Diameter of fitting hole d, mm 17 23
Diameter of core part d1, mm 17 22
Diameter of pin ball D1, mm 33,3–
33,3–
Thickness of pin ball h, mm 13,4 13,4
Weight, not more, kg 0,3 0,45 0,4 0,7
Climatic performance UHL 1
Specified mechanical tensile load, not more, kN 70 120
Fig No. 1 3 4 2 3 4
Part XI. Line fittings, GOST 13276, GOST Р51177TU �449-0��-216�92�2-2009
WWW.ENERGY-21.RU 164Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»16510, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Fig. 1
Fig. 2
Part XI. Line fittings, GOST 13276, GOST Р51177TU �449-0��-216�92�2-2009
Fig. 3
Fig. 4
Part XI. Line fittings, GOST 13276, GOST Р51177TU �449-0��-216�92�2-2009
WWW.ENERGY-21.RU 166Tel/fax: (�51) 66�-24-60, 66�-26-75, 66�-24-92, 211-60-20, 211-60-�0e-mail: [email protected]
AO «ENERGY +21»16710, Safonova str., Uvelski, Chelyabinsk region, 457000, Russia
Signed in press 00.00.2019. Format 60×841/16.Volume 00,00 printing sheets. Circulation 100 pcs. Order 2130.
Chelyabinsk Publishing House454080, Chelyabinsk, Sverdlovsky Av., 60.