contender™ series covers with pilot lights or push buttons ... · lights or push buttons. covers...
TRANSCRIPT
![Page 1: Contender™ Series Covers with Pilot Lights or Push Buttons ... · Lights or Push Buttons. Covers Only for Contender Bodies All Covers are Malleable Iront Supplied with Four Bolts](https://reader030.vdocuments.site/reader030/viewer/2022040317/5e2c8bc1b0532269f84d3300/html5/thumbnails/1.jpg)
•27Contender™ Series Covers with PilotLights or Push Buttons. Covers Onlyfor Contender BodiesAll Covers are Malleable IrontSupplied with Four Bolts and Blank Nameplate.UL Classified to interchange with Grouse-Hinds® EDS Bodies.
DescriptionNameplateMarking
CatalogNumber f
Cover complete with Push Buttons - Factory Sealed^ \ For use with EDS
^M ' j^3
N M 1 Circuit Universal
* •* W* 2 Circuit UniversalU1 OC
2 Circuit1 Open
'* v 1 Closed>3 - *
Bodies (furnished
al*• •
•1*• •iUA• •_L• •••la
with 4 bolts and blank cover
Specify
Specify
STARTSTOP
nameplate).
EDKB-U1
EDKB-U2
EDKB-OC
U2
J1U2
Cover complete with Pilot Lights - Factory Sealed6W120V, Type 6S6 Lamp.For use on standard EDS Bodies (furnished with 4 bolts and blank cover nameplate).
One pilot light (red jewel*) and oneuniversal circuit
One pilot light (red jewel*)and two universal push buttons
One pilot light (red jewel*)
Two pilot lights (red jewels*)
tit
tlAtl*
Specify
Specify
Specify
Specify
EDKB-J1U1
EDKB-J1U2
EDKB-J1
EDKB-J2
* *
|IPBorU
B2PB or 2JorUPB
"S p̂BHipW^
B
1JSSorSPB
t For aluminum covers, add suffix - A.
Covers Only - for use on Contender bodiesSupplied with 4 cover bolts and blank cover nameplate.
Push Button or Pilot Light Covers3/4" tapped openings for pilot light.1/2" tapped openings for push button.
One opening: one push buttonOne opening: one pilot light
Two openings: two push buttonsTwo openings: two pilot lightsTwo openings: one of each
SpecifySpecify
SpecifySpecifySpecify
EDSK-1PBEDSK-1J
EDSK-2PBEDSK-2JEDSK-1JPB
Push Button or Selector Switch1/2" tapped openings.
Two openings: selector switchor two push buttons (side by side)
Specify EDSK-2SP
Push Button, Pilot Light or Selector Switch3/4" top and 1/2" bottom-tapped openings.
One top and two bottom openings: Specify EDSK-USSone pilot light, two push buttons; (side by side)one pilot light, one selector switch
1/2" top and 1/2" bottom-tapped openings.one top and two bottom openings: Specify EDSK-3PBthree push buttons
Blank Specify EDSK-BSpecify
* For other colors, add color suffix for each pilot light: Amber - J6, Blue - J11, Clear - J10, Green - J3, Opal - J8.
Effective October, 1993Copyright 1993 Printed in U.S.A.
1701 West Wellington AvenueChicago, Illinois 60657
PAGE 27
![Page 2: Contender™ Series Covers with Pilot Lights or Push Buttons ... · Lights or Push Buttons. Covers Only for Contender Bodies All Covers are Malleable Iront Supplied with Four Bolts](https://reader030.vdocuments.site/reader030/viewer/2022040317/5e2c8bc1b0532269f84d3300/html5/thumbnails/2.jpg)
18Contender™ Series Factory SealedControl Stations and Pilot Lights:Explosion-Proof, Dust-Ignition-ProofUNILETS® for Use with Threaded Metal Conduit.Furnished with Internal Ground Screw.
Applications• Push buttons and selector switchesare used in conjunction with contactorsor magnetic starters for remote con-trol of motors. They provide circuit con-trol and/or selection.• Pilot lights provide visual assurancethat an electrical function is being per-formed at a remote or local location.• Contender Series factory sealed con-trol stations confine arcing of devicewithin the enclosure, preventing igni-tion of ignitable atmospheres duringcontrol operation of motors and otherequipment.• Used in classified areas where flam-mable vapors, gases or highly com-bustible dusts are present.• For installation in chemical and petro-chemical plants, refineries, and otherprocess industries or where corrosiveelements are present.
Features• Covers UL Listed when used onContender bodies.• Covers UL Classified to interchangewith Crouse-Hinds® EDS bodies.• Finish is epoxy powder coat for en-hanced corrosion resistance.• Large back box for ample wiringroom.• Ground screw installed in bodiesfor ground continuity.• Corrosion-resistant stainless steelhex-head captive screws hold coversto body.• Factory sealed enclosure eliminatesneed for adding sealing fittings andcompound at each conduit entrance.• Heavy-duty, 10 ampere 600V rated.• Factory sealed pilot lights suppliedwith jewel/guard assembly and 120V,6W 6S6 lamp.• Dozens of possible combinations ofpush buttons, pilot lights and selectorswitches.• Accurately tapped, tapered hubsfor tight, rigid joints and ground con-tinuity.• Smooth, rounded integral bushingin each hub protects conductor insu-lation.• Stainless steel push button shaftoperates within stainless steel bush-ing assuring long, maintenance-freeoperation.
• Push button and selector switch con-tacts are silver cadmium oxide whichare "sealed" in lower phenolic chamberisolated from corrosive elements.Assures positive contact and long, trou-ble-free operation.• Enclosed stainless steel helper springprevents accidental operation of pushbutton in severe vibration installations.
• All front-operated push buttons aresupplied with lockout type guards asstandard. Hole in guard will acceptlocks with up to 1/4" hasp. Permits lock-ing of push button to prevent unau-thorized operation.• Clearly marked terminals with brassscrews and spade terminals assurequick, easy wiring.
Effective October, 1993Copyright 1993 Printed in U.S.A.
PAGE 18
1701 West Wellington AvenueChicago, Illinois 60657
![Page 3: Contender™ Series Covers with Pilot Lights or Push Buttons ... · Lights or Push Buttons. Covers Only for Contender Bodies All Covers are Malleable Iront Supplied with Four Bolts](https://reader030.vdocuments.site/reader030/viewer/2022040317/5e2c8bc1b0532269f84d3300/html5/thumbnails/3.jpg)
'26Class I, Div. 1 and 2,Groups C,D;Class II, Div. 1 and 2,Groups E,F,G;Class III
Contender™ Series Pilot LightAccessories and Parts
Description Catalog Number
Pilot Light, Factory SealedFurnished with 6S6 110V lamp, jewel and guard. Has 10" long, Type SFF-2(150°C) pigtail leads. Body has 3/4" straight thread (NPSM).
With Red JewelWith Green JewelWith Amber JewelWith Blue JewelWith Clear JewelWith Opal Jewel
SPL-RE-BSPL-GR-BSPL-AM-BSPL-BL-BSPL-CL-BSPL-OP-B
Chamber OnlySame as above, except less jewel, guard and lamp
SPL-SC-B
Pilot Light, Factory Sealed - LEDFurnished with candelabra base LED, jewel and guard. Has 10" long, Type SFF-2(150°C) pigtail leads. Body has 3/4" straight thread (NPSM).
With Red LED, Clear JewelWith Green LED, Clear JewelWith Amber LED, Clear
SPLN-RE-BSPLN-GR-BSPLN-AM-B
Pilot Light Jewel/Guard AssemblyUse catalog number as suffix when jewel color other than red is desired. If thejewel/guard assembly only is desired, order by catalog number. Jewels and guardare not available as separate items.
Amber Jewel/GuardBlue Jewel/GuardClear Jewel/GuardGreen Jewel/GuardOpal Jewel/GuardRed Jewel/Guard
JGB-AJGB-BJGB-CJGB-GJGB-OJGB-R
~il
B
Clear BulbsHas candelabra base.6W, 120V Type 6S6
LED ReplacementsRed LEDGreen LEDAmber LED
EPL-B6W
EPL-LED-REPL-LED-GEPL-LED-A
TransformerAdd suffix as listed below.Transformer clamps directly to pilot light barrel.Only one pilot light/ transformer assembly per one gang Contender body.
Primary Voltage
220277440550
Lamp Voltage
120120120120
Cat. No. orSuffix
-TR-2-TR-3-TR-4-TR-5
Effective October, 1993Copyright 1993 Printed in U.S.A.
PAGE 26Appleton
• • ELECTRIC COMPANY
1701 West Wellington AvenueChicago, Illinois 60657