contact - zoeftig ltd · to bs en12720 :2009 and non-ozone depleting (in accordance with the...

Contact

Technical specificationsPolyurethane seats

• Frame is made from bright mild steel flat bar formed and welded to shape. Steel frame encapsulated in Z-Form integral skin Polyurethane foam, 80 Shore A, UV resistant, easy clean, colour core matched to surface paint colour, resistance to liquid spills and staining to BS EN12720 :2009 and non-ozone depleting (in accordance with the Montreal Protocol)

• PU conforms to BS 5852 2006 Ignition sources 0, 1 & 5. Also meets the requirements of CAL 133.

Upholstered seats

• Pressed 13.5mm birch plywood, over moulded with cold cure foam and upholstered in vinyl, fabric or E-leather.

Seat and table brackets

• ABS

Arms, legs, end caps and clamps

• Pressure diecast ADC-12 Aluminium, Powder coated.

Beam

• Aluminium extrusion: 6005A T6, Clear natural Anodized. Wall Thickness: 4 – 5 mm.

Paint

• Epoxy Polyester Powder

• Powder Coating Thickness: 60-80 microns

• Cross-cut test: BS EN ISO 2409:2013 – ISO Class 0

Strength rating

• Tested & certified to meet the requirements of:

- BS EN12727:2016 test Level 4 - BS EN 16139:2013 test level 2 - ANSI/BIFMA X5.4-2012.

• Zoeftig seating design guide testing standard

Fire rating

• Tested & certified to meet the requirements of:

- BS 5852:2006 Assessment of the ignitability of upholstered seating by smoldering and flaming ignition sources. Section 4: Methods of test for the ignitability of upholstered composites ignition source 0, 1 & 5.

• Also meets the requirements of CAL 133

Quality

• Zoeftig Quality Standard 728

• Intended for indoor use only

Zoeftig Ltd strives to continuously improve its products and manufacturing methods. The company reserves the right to make changes without notice when, in the opinion of the company, such changes improve the product or its performance.

Contact

Contact Contact Plus

2150mm 585mm

850m

m (P

lus)

800m

m

2350mm (Plus) 620mm (Plus)

2260mm

850m

m (P

lus)

800m

m

585mm2460mm (Plus) 620mm (Plus)

General dimensions

Contact

Contact Plus

Contact and Contact Plus seat dimension comparisons

1240 (4’-0.8”) 100

(3.95”)]

525 (1’-8.7”)

550 (1’-9.65”)

1985 (6’-6.15”)

550 (1’-9.65”)

330 (6’-1”)

30 (1.2”)30

(1.2”)

390 (1’-3.35”)

620 (2’-0.4”) 425

(1’-4.75”)

610 (2’)

850 (2’-9.45”) 435

(1’-5.15”)

1340 (4’-4.75”) 100

(3.95”)575

(1’-10.65”)600

(1’-11.6”)

2160 (7’-1.05”)

600 (1’-11.6”)

355 (1’-1.2”)

30 (1.2”)30

(1.2”)

390 (1’-3.35”)

800 (2’-7.5”)

400 (1’-3.75”)

435 (1’-5.15”)

610 (2’)

585 (1’-11.05”)

Standard Plus

Seat types PU Upholstered PU Upholstered

Seat spacing Variable seat centres: Variable seat centres:

500mm to 550mm with arms, 460mm to 550mm without arms 550mm to 600mm with arms, 510mm to 600mm without arms

Seat width 440mm 440mm 490mm 490mm

Depth 585mm 585mm 620mm 620mm

Back Height 800mm 800mm 850mm 850mm

Seat height 435mm / DDA - 495 435mm / DDA - 495 435mm / DDA - 495 435mm / DDA - 495


ContactGeneral description• Zoeftig’s new Contact waiting area seating system, designed with a

visual lightness, approachable precision and candid distinction.

• With Contact, unlike more conventional seating solutions, the seat and accessory positioning system is not static or predefined.

• Contact employs a clamp like, fixing mechanism which fits to an uninterrupted beam. This allows the parts to be fitted in any position along a straight line. So, whatever spacing you want between your seats, whatever position you want the arms and tables, Contact will let you do it. Thanks to its versatility, Contact will easily cater to a luxurious, open waiting areas with a comfortably spaced seating configuration, or a small, enclosed area with a need for a lot of seats with a tight, dimensionally informed configuration and everything in between.

• The innovative Contact Seating System is both adaptable and robust, designed and manufactured especially for projects where the furniture will be in constant use. The seating has been developed to satisfy the

Standard Contact seat spacer brackets

• For maintaining the correct distance between seat rows when placed back to back. These integrate seamlessly into the design of the product, making them as inconspicuous as possible. The spacer bracket generates a gap between back to back rows of 100mm at the top of a standard back rest.

most demanding anthropometric and ergonomic requirements while its simplicity and low maintenance requirements ensure the products long term performance.

• Contact offers a system of highly configurable, modular elements that will offer ultimate product flexibility and customer choice. The system includes: seats, arms, legs, tables and linking elements. The system facilitates further permutations of back to back seating and rows arranged in modules of seats and tables. Contact’s design and modularity also allows the product to be reconfigured at any stage during its lifetime and further improves the overall speed and ease of day-to-day servicing.

• Where more room is available, Contact Plus provides a wider seat than the standard Contact size, offering the highest levels of comfort for passengers. Also available in both PU and upholstered options, Contact Plus is an attractive and affordable option for airports with larger terminal spaces.

Supporting structure: beam, arms and legs

• The main structure of the system comprises of an extruded aluminum beam on to which individual parts (seats, tables, arms and legs) are mounted using Contact’s patented mechanism.

• Arms and legs are powder coated pressure diecast aluminium mouldings. The standard colour for these components is RAL 7021 and RAL 9006, but most RAL or Pantone colours can be specified. There may be an additional charge for custom colours depending on the size of order.

• Arms are optional and can be specified in any configuration, additionally seats and arms can be spaced at any distance within the system range. Due to the products modularity, a range of configurations are possible and can be changed throughout the products lifetime.


Functional descriptionSeats

• Contact PU seat shells are manufactured using Zoeftig’s specially formulated Z-Form self-skinning, structural polyurethane foam system. The foam is moulded onto a steel frame, which allows the polyurethane foam to flex and conform to the user’s shape, enabling maximum comfort for extended periods.

• Our standard colour for polyurethane components is Graphite RAL 9011, but Z-Form can be matched to most RAL or Pantone colours. There may be an additional charge for custom colours, depending on the size of order.

• Contact Upholstered seat shells are available in a range of vinyl, fabric or E-leather. The upholstery, cut and sewn with a distinctive center stitch, is fitted over a fire-retardant core foam and structural birch plywood shell. A range of colours are available for each individual material.

• All seat options are mechanically fixed to the system facilitating easy removal and replacement. Stock polyurethane replacements can be ordered as and when required, but with any special PU colours, customers are advised to order an extra 5% of replacements when initially purchasing the system.

Contact• Legs are fitted at either end of the beam. Glide feet attached to the

legs can be free standing or fix down and are fully adjustable to allow for the system to sit level on uneven floors. Anti-slip pads can be added to feet where required.

Tables

• Full and half tables are constructed from high pressure compact laminate and faced on both the top & bottom using a decorative laminate (other table materials such as Quartz and Corian are available). Tables can be positioned at left- hand or right-hand row ends or intermediate positions.

PU

Upholstered

Component breakdown Seat types

End Cap Leg Beam

Arm

Back to back

PowerPowerful solutions


Danish

US

Italian TUF A+C USB

BrazilianSwiss

UK

Australian

Schuko

Chinese/Combi

French/Belgium

USB C

USB A

Contact

Structure• Beams are always in

anodised aluminium.

• Bow tie (in arm), Arm plugs, Brackets, Adapter brackets – RAL 7021 ONLY (Feet always Black as standard)


Russet

Oak Brown

Purple Iris

Grey

Bright Blue

Blueberry

Nasturtium

Burnt Orange

Saddle Tan

Lilac

Light grey

Phoenician

Colonial Blue

Marigold

Brandy

Camel

Mauve

Glacier

Sky

Coal

Saffron Silk

Apricot

Rum Sherbert

Rosewood

White

Light Blue

Cadet

Lemon Peel

Melon

Ceylon Ivory

Natural

Snow White

Cerulean

Fjord

Wheat

Candy Apple FireRed Lox Indian Red Melba

Deep Clay

Allspice

Grape

Slate

Marina

Royal Blue

Persimmon

Wine

Port

Chocolate

Expresso

Black

Bluejay

Navy

Tomato

New Burgundy

Materials and finishesUpholstery: Leather + E-Leather

Compact laminate

PVC / PU Colour options

* More options available

| Materials and finishes› Upholstery· Leather + E-Leather:

Contact |

* More E-Leather ref. are available

· PVC:/ PU Colour options

2980 Antracite 2976Black 2989 Burgundy 2982 Cloud Grey 3135 Tan 2978 Green 3136 Royal Blue 2984 Sand 3129 Garnet

› Arms, Legs & Endcaps

RAL7021 RAL9006Storm Solidz Graphite 3505 F7837

Folkstone F7927

Oiled Walnut F5487

› CompactLaminate › Structure· Beams are always in anodised aluminium.· Bow tie (in arm), Arm plugs, Brackets, Adapterbrackets –RAL 7021 ONLY (Feet always Black asstandard)

| Materials and finishes› Upholstery· Leather + E-Leather:

Contact |

* More E-Leather ref. are available

· PVC:/ PU Colour options

2980 Antracite 2976Black 2989 Burgundy 2982 Cloud Grey 3135 Tan 2978 Green 3136 Royal Blue 2984 Sand 3129 Garnet

› Arms, Legs & Endcaps

RAL7021 RAL9006Storm Solidz Graphite 3505 F7837

Folkstone F7927

Oiled Walnut F5487

› CompactLaminate › Structure· Beams are always in anodised aluminium.· Bow tie (in arm), Arm plugs, Brackets, Adapterbrackets –RAL 7021 ONLY (Feet always Black asstandard)

Antracite Black Burgundy Cloud Grey Tan Green Royal Blue Sand Garnet

Storm Solidz Graphite Folkstone RAL7021Oiled Walnut RAL9006

Arms, legs and endcaps

ContactEnvironmental and quality certificationsThis product has been manufactured according to the environmental management system certified as per standard UNE-EN ISO 14001:2015

The quality management of this product has been carried out according to the quality system certified as per standard UNE-EN ISO 9001:2015

Ho

we

ve

r,fo

rth

ep

urp

os

eo

ffa

cil

ita

tin

gto

the

cu

sto

me

rth

ela

tes

tn

ov

elt

ies

,FI

GU

ER

AS

res

erv

es

th

eri

gh

tto

intr

od

uc

eth

em

od

ific

ati

on

sa

nd

va

ria

tio

ns

tha

tit

con

sid

ers

mo

st

ap

pro

pri

ate

an

ds

uit

ab

lefo

rm

ark

eti

ng

its

pro

du

cts

.

| Environmental and quality certifications› This product has been manufactured according t o the environmental management system certified as per standard UNE-EN ISO 14001:2015

› The quality management of this product has been carried out according t o the quality system certified asper standard UNE-EN ISO 9001:2015

Contact |

6 / 4Ho

we

ve

r,fo

rth

ep

urp

os

eo

ffa

cil

ita

tin

gto

the

cu

sto

me

rth

ela

tes

tn

ov

elt

ies

,FI

GU

ER

AS

res

erv

es

th

eri

gh

tto

intr

od

uc

eth

em

od

ific

ati

on

sa

nd

va

ria

tio

ns

tha

tit

con

sid

ers

mo

st

ap

pro

pri

ate

an

ds

uit

ab

lefo

rm

ark

eti

ng

its

pro

du

cts

.

| Environmental and quality certifications› This product has been manufactured according t o the environmental management system certified as per standard UNE-EN ISO 14001:2015

› The quality management of this product has been carried out according t o the quality system certified asper standard UNE-EN ISO 9001:2015

Contact |

6 / 4


contact - zoeftig ltd · to bs en12720 :2009 and non-ozone depleting (in accordance with the...

Documents