Christoph Merian-ring 11

CH 4153 Reinach BL

Switzerland

Tel +41 (0)61 717 8234

Fax +41 (0)61 717 8788

Website www.adse.eu E-mail info@adse.eu

1 of 6

CONSULTING AND ENGINEERING AG

ADSE AG is proud to announce the collaboration with Co-Guard in the updated seminar program for the year 2016 which will be performed in the training centre in Reinach. The focus of the seminars will be for aviation professionals working in dedicated parts of the aviation environment. The training is performed by well experienced aviation professionals who have worked for various aviation industries and authorities. The new collaboration will introduce the new requirements in relation to SMS, OSD and human factors in the basic program. All training sessions are based on the ADSE/ Co-Guard developed modules with dedicated workshops during the day. These workshops will address the theory based on actual situations in the aviation industry and can be fine-tuned based on the working environment of the participants. For each seminar target audiences are mentioned. Special “in house” training programs can be provide d on request for which a dedicated leaflet is available. For all seminars the following conditions apply:

– Start of the seminar is at 08.30 with an expected closure around 17.30. – Seminars will be held if a minimum of 6 participants have signed up – Seminars will have a maximum of 14 participants to assure interaction – All seminars include drinks during the breaks and a light lunch (sandwiches)

TRAINING PROGRAM 2016

Code 101: Certification Verification Engineer (CVE) Seminar. EXTRA SESSION

Dates: Tuesday October 04 thru Thursday October 06, 2016 Target audience is Certification Verification Engineers or people who are in the process to become a CVE. Program: EASA & International regulations Role and Responsibilities of the CVE Part 21 certification process introduction Performing the certification process flow and requ irements for engineering Performing the certification process flow and requ irements for production Testing & Conformity statement requirements Selection of requirements Means of compliance selection Independent position From Compliance to Performance: changes in EASA ap proach

Code 102: CVE Advanced Seminar. NEW DATE

Date: Tuesday May 31 thru Thursday June 02, 2016 Target audience is Certification Verification Engineers and staff assigned to certification. Program: Introduction Certification Specifications Introduction AMC & GM of Certification Specificati ons Selection of applicable requirements

2 of 6

Determine means of compliance showing From Compliance to Performance: changes in EASA ap proach Error management in design processes

Workshops on the use and selection of requirements (workshop will be based on a mix of the actual work of the participants in their companies)

Code 201: CS 25.853 Flammability Awareness Seminar. NEW DATE

Date: Wednesday June 22, 2016 Target audience is all staff of production and engineering involved in flammability certification. Program: Introduction to fire safety Introduction to CS 25.853 Introduction to tests Introduction to sample preparation Conformity inspection Test witnessing Testing (pass / fail criteria)

Code 302: Changes in EASA; revised roles & obligati ons for management NEW

Date: Tuesday June 07 thru Wednesday June 08, 2016 Target audience Senior and middle management working in EASA approved organisations. Program: Overview of international regulations EASA, their partners & collaboration EASA approved organisations and liability Changes in regulatory approach Tasks and responsibilities of the management SMS for management and staff Liability in relation to cooperation with other co mpanies Introduction to a Just Culture

Code 303: EASA Part 21 subpart J Seminar.

Date: Tuesday September 27 thru Thursday September 29, 2016 Target audience is all staff involved in tasks performed under the EASA Part 21 subpart J (Design)

approval. Program: Introduction to international regulations Introduction to EASA Introduction to Part-21 Introduction to Part 21 subpart J Introduction to DAS Introduction to certification Human factors for Part 21 Introduction to classification From compliance to performance Managing error in Part 21

3 of 6

Code 304: EASA Part 21 subpart G Seminar. NEW DATE

Date: Tuesday November 01 thru Thursday November 03 2016 Target audience is all staff involved in tasks performed under the EASA Part 21 subpart G (Production)

approval. Program: Introduction to international regulations Introduction to EASA Introduction to Part-21 Introduction to Part 21 subpart G Introduction to tasks & responsibilities Key topics in the Production Organisation Production and delivery of Parts Introduction to human factors in Part 21 Means of collaboration From Compliance to Performance Managing error in Part 21

Code 305: EASA Part 21 Operational Suitability Data (OSD) Seminar. NEW

Date: Tuesday June 28 thru Wednesday June 29, 2016 Target audience is all staff of engineering involved in development of new products and modifications. Program: Introduction to OSD Categorisation of OSD Classification of OSD Use of the new CS requirements (CS-FCD, CS MMEL, e tc.) Implications for the new / modification approval Means of compliance showing Managing Human Error

Code 401: EASA Refresher Seminar. NEW DATE

Date: Thursday June 30, 2016 Target audience is all staff involved in the Part 21 design and production certification. Program: Changes in the EASA organisation Changes in initial and continuing airworthiness Changes in CS requirements Changes in international collaboration EASA approach to SMS

Code 501: Cabin Safety Seminar. NEW DATE

Date: Tuesday September 06 thru Thursday September 08, 2016 Target audience is all engineering staff involved in interior design, specification and certification and

inspectors of Part 145 organisations. Program: History of Cabin Safety and cabin Safety r ules Cabin safety related requirements & Security requi rements Application of cabin safety requirements and means of compliance Human Factors and OSD CRI”s and alternative means of compliance (special cabins, VIP, etc.) Cabin walk through

4 of 6

Crashworthiness and emergency evacuation Future changes in the rules Changes in Safety and Safety management Managing Human Error

Code 502: Cabin Safety Management Seminar.

Date: Tuesday November 22 thru Wednesday November 2 3, 2016 Target audience is all management involved in interior design, specification, certification, installation and

continued airworthiness. Program: History of Cabin Safety and cabin Safety r ules Cabin safety related requirements & Security requi rements Application of cabin safety requirements and means of compliance Human Factors and OSD CRI’s and alternative means of compliance Crashworthiness and emergency evacuation Managing Safety and Performance Managing Human Error Introduction to a Just Culture

Code 601: Oxygen System Seminar.

Date: Thursday November 24, 2016 Target audience is all engineering staff involved in interior design, specification and certification and

testing of oxygen systems. Program: Oxygen Systems overview Oxygen System requirements Oxygen System Certification Human Factors and OSD Operational Constraints

Code 701: Optimising your Design Organisation; from compliance to performance

Date: Tuesday December 06 thru Thursday December 08 , 2016 Target audience is all engineering staff involved in design, specification, project management, and

certification, including leaders and management in a design organisation. Program: EASA requirements for Management systems Changes in viewpoints; compliance to performance Understanding Human Performance Optimisation of Performance Communication systems Optimising Communication The learning Organisation You can fill out the attached application form to sign up for the training. Signed application forms are binding and confirm that you have read and accepted the terms and conditions as listed on the next page.

5 of 6

BOOKING CONDITIONS

Registration You can register by filling out the application form which can be obtained from Pieter Ruitenberg (Pieter.ruitenberg@adse.eu). Confirmation of registration You will receive a preliminary confirmation after we have received your signed application form. Registration will be accepted as long as the seminar has not been fully booked (14 participants maximum). We therefore ask for timely reservations to avoid disappointments. Confirmation of participation. You will receive a confirmation of the seminar at least two weeks prior to the start date. The confirmation provides you with all details on schedule, location, means of transport and hotel accommodation in the area. ADSE AG will not book the hotels.

Seminar fees. Seminar fee is CHF 1490,-- for a three day session, CHF 1050,-- for a two day session and CHF 550,-- for a one day session (excluding VAT) per participant and includes:

– Seminar hand out in colour – Workshop material – Certificate at the end of the seminar – Drinks during the breaks in the seminar – A light lunch with drinks

Payment. Payment details will be included in the final confirmation which will be sent to all participants 4 weeks prior to the training. Full payment needs to be received one day prior to the start of the training program. Cancellation by the participant Registered participants can cancel their participation up to 3 weeks in advance in writing without incurring a charge to the participant. A full fee will be invoiced when registrations are cancelled by a later date or when the participant fails to attend. Registered participants can nominate a replacement to stand in for them prior to the start of the seminar. Cancellation by ADSE AG. ADSE AG reserves the right to cancel the seminar if necessary by force majeure. ADSE AG will propose new dates to the participants in close consultation with the participant. Already paid invoices will be refunded if the participant is unable to change the participation to a new date. Any further claims or requests for compensation of any kind other than the invoiced seminar amounts are excluded. Seminar documents copyright The seminar documents are subject to ADSE AG/ Co-Guard copyright and may not be copied or duplicated without obtaining prior written authorization from ADSE AG/Co-Guard. This also applies to in-house use. Any use beyond the limits set by the Copyright Act is not permitted without the approval of ADSE AG/Co-Guard and is liable to criminal prosecution. Overnight accommodation Please note that we do not make any overnight accommodation reservations. Participants will need to arrange overnight accommodation themselves. We do provide a list of hotels in the neighbourhood. We look forward to welcome you for a seminar in our facility in Reinach. You can contact Pieter Ruitenberg by Email (Pieter.ruitenberg@adse.eu) or phone (+31 654798383) for any additional information or company specific training programs, or info.ag@adse.eu for general and booking related queries.

6 of 6

APPLICATION FORM

Company:

Contact Name:

Email:

Phone:

Address:

Postal Code:

City:

Country:

PARTICIPANTS:

Training code: Date: Name: Email: The undersigned declares that he has read the condi tions under which the training is performed and agrees to these conditions and the obligations contained herein.

Date:

Signature:

You will receive a confirmation of the registration within one week by Email. Return the completed form to: ADSE Consulting & Engineering AG Attn. Pieter Ruitenberg Christoph Merian-Ring 11 CH-4153 Reinach BL Switzerland Or email: info.ag@adse.eu

Christoph Merian-Ring 11 CH 4153 Reinach BL

Switzerland Tel +41 (0)61 717 8234 Fax +41 (0)61 717 8788 Website www.adse.eu

E-mail info@adse.eu