consult + engineer + commission creating exceptional environments © all rights reserved january...

Consult + Engineer + Commission

Creating Exceptional EnvironmentsCreating Exceptional Environments

www.syska.com© All Rights Reserved

January 18, 2011

“UNINTERRUPTIBLE POWER SYSTEM (UPS) TECHNOLOGY

UPDATE”

IEEE Industry Applications Society Atlanta Chapter


© All Rights Reserved

UPS TECHNOLOGY UPDATE

2

TYPES OF UPS TECHNOLOGIES

•STATIC, DOUBLE CONVERSION

•STATIC, LINE INTERACTIVE

•FLYWHEEL-BASED

•ROTARY

•OFF-LINE




3

STATIC, DOUBLE CONVERSION UPS TOPOLOGY

•NORMAL POWER PATH: INPUT-RECTIFIER-DC BUS- INVERTER-OUTPUT

•BYPASS POWER PATH: INPUT-STATIC SWITCH-OUTPUT

•STORED POWER PATH: BATTERY/FLYWHEEL-DC BUS- INVERTER-OUTPUT

•MAJOR MANUFACTURERS: GE, LIEBERT, MGE, MITSUBISHI, POWERWARE, TOSHIBA




4




5

STATIC, DOUBLE CONVERSION UPS CHANGES FOR INCREASED OPERATING EFFICIENCY

•PWM IGBT RECTIFIERS INSTEAD OF SCRS•PWM IGBT INVERTERS•ELIMINATE INPUT AND OUTPUT TRANSFORMERS•USER-SELECTABLE OFFLINE OPERATION•USER-SELECTABLE CAPACITY CONTROL•DISTRIBUTED OR SYSTEM STATIC BYPASS SWITCH


© All Rights Reserved 6

STATIC, DOUBLE CONVERSION UPS OPERATING EFFICIENCY

•TYPICALLY 91%-96% AT FULL LOAD AND 90%- 94% AT HALF LOAD

•USER-SELECTABLE OFFLINE 98%

•USER-SELECTABLE CAPACITY CONTROL CAN IMPROVE % AT LOW LOADS





7

THE FLEAS THAT COME WITH THE DOG, PART 1

•ELIMINATING TRANSFORMERS REDUCES DC BUS SAFETY•INDUSTRY TREND IS TO ELIMINATE TRANSFORMERS•ELIMINATING THE OUTPUT TRANSFORMER MAY ELIMINATE A WYE-CONNECTED OUTPUT•INDUSTRY TREND IS TO PROVIDE DISTRIBUTED STATIC BYPASS SWITCHES•IN USER-SELECTABLE OFFLINE MODE, SOME TRANSIENTS COULD GET THROUGH BEFORE THE UPS CAN REACT




8

STATIC, LINE-INTERACTIVE UPS TOPOLOGY

•NORMAL POWER PATH: INPUT-MAIN STATIC SWITCH-OUTPUT

•BYPASS POWER PATH: INPUT-ALTERNATE STATIC SWITCH-OUTPUT

•STORED POWER PATH: BATTERY-DC BUS-INVERTER- OUTPUT

•MANUFACTURER: APC (SYMMETRA MW)




9




10

STATIC, LINE INTERACTIVE UPS CHANGES FOR INCREASED OPERATING EFFICIENCY

•IMPROVED FIRMWARE CONTROL

STATIC, LINE INTERACTIVE UPS OPERATING EFFICIENCY

•TYPICALLY 97% AT FULL LOAD, 96% AT HALF LOAD AND 94% AT QUARTER LOAD




11


•REDUCED DC BUS SAFETY

•SOME TRANSIENTS COULD GET THROUGH BEFORE THE UPS CAN REACT




12

FLYWHEEL-BASED UPS TOPOLOGY

•NORMAL POWER PATH: INPUT-MAIN STATIC SWITCH-INDUCTOR-OUTPUT

•BYPASS POWER PATH: INPUT-ALTERNATE STATIC SWITCH-OUTPUT

•STORED POWER PATH: FLYWHEEL-CONVERTER- INDUCTOR-OUTPUT

•MANUFACTURER: ACTIVE POWER




13




14

FLYWHEEL-BASED UPS CHANGES FOR INCREASED OPERATING EFFICIENCY

•IMPROVED FIRMWARE CONTROL

STATIC, LINE INTERACTIVE UPS OPERATING EFFICIENCY

•TYPICALLY 98% AT FULL LOAD AND 96% AT HALF LOAD




15


•LIMITED ENERGY STORAGE – 14 SECONDS

•SYSTEM CAPACITY LIMITED BY THE CAPACITY OF ONE STANDBY GENERATOR




16

BASIC ROTARY UPS TOPOLOGY

•NORMAL POWER PATH: INPUT-RECTIFIER-INVERTER-SYNCHRONOUS MACHINE-OUTPUT

•BYPASS POWER PATH: INPUT-STATIC SWITCH - SYNCHRONOUS MACHINE –OUTPUT

•STORED POWER PATH: BATTERY-DC BUS-INVERTER- SYNCHRONOUS MACHINE-OUTPUT

•MANUFACTURER: PILLER




17




18

VARIATION ON ROTARY UPS TECHNOLOGY, AKA DYNAMIC ROTARY UPS (DRUPS)

•NORMAL POWER PATH: INPUT-RECTIFIER-COUPLING CHOKE-OUTPUT•BYPASS POWER PATH: INPUT-BYPASS SWITCH - OUTPUT•STORED POWER PATH: ENGINE-COUPLING-ENERGY ACCUMULATOR-SYNCHRONOUS MACHINE- COUPLING CHOKE-OUTPUT•CAN OPERATE AT LOW VOLTAGE OR MEDIUM VOLTAGE •MANUFACTURERS: EURO-DIESEL, HITEC, PILLER




19




20

ROTARY UPS CHANGES FOR INCREASED OPERATING EFFICIENCY

•IMPROVED FIRMWARE CONTROL•USER-SELECTABLE OFFLINE OPERATION

ROTARY UPS OPERATING EFFICIENCY

•TYPICALLY 92% AT FULL LOAD AND 88% AT HALF LOAD (BASIC)•TYPICALLY 96% AT FULL LOAD AND 48% AT HALF LOAD (VARIATION)




21


•VARIATION IS THE MOST UPS CAPACITY/SQUARE FOOT OF BUILDING AREA

•VARIATION HAS CONSTANT LOSSES, REGARDLESS OF LOAD

•VARIATION CAN SUPPLY LARGE MEDIUM VOLTAGE SYSTEMS (VOLTAGE VARIES

BY MANUFACTURER)




22

OFFLINE UPS TOPOLOGY

•NORMAL POWER PATH: INPUT-STATIC SWITCH- OUTPUT•BYPASS POWER PATH: INPUT-BYPASS SWITCH- OUTPUT•STORED POWER PATH: BATTERY-INVERTER-STEPUP TRANSFORMER-OUTPUT•CAN OPERATE AT LOW OR MEDIUM VOLTAGE (UP TO 25KV)•MANUFACTURER: S&C




24

OFFLINE UPS CHANGES FOR INCREASED OPERATING EFFICIENCY

•CAPACITY UP TO 16MW PER SYSTEM•IMPROVED FIRMWARE•CAN ACCOMMODATE WET CELL OR VRLA BATTERIES•CAN ACCOMMODATE UP TO 20 MINUTES BATTERY OPERATION AT FULL LOAD•CAN BE INSTALLED INDOORS OR OUT DOORS•CAN UTILIZE METAL-ENCLOSED OR METAL-CLAD SWITCHGEAR•DISTRIBUTED OR SYSTEM STATIC BYPASS SWITCH



OFFLINE UPS OPERATING EFFICIENCY

•TYPICALLY 98%-99% AT ALL LOADS


•SOME TRANSIENTS COULD GET THROUGH BEFORE THE UPS CAN REACT

consult + engineer + commission creating exceptional environments © all rights reserved january...

Documents

rotary ups technology

rotary ups changes

line interactive ups

active power slide

double conversion ups

flywheelbased ups changes

half load slide

piller slide