construction – general construction construction – quick hitches …€¦ · ·...

1We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany

11

CONSTRUCTION – GENERAL CONSTRUCTION

CONSTRUCTION – QUICK HITCHES & BUCKETS

CONSTRUCTION

TILTROTATORSCONSTRUCTION – LANDSCAPING & SNOW REMOVAL

CONSTRUCTION – UTILITIES, OIL & GAS

SCRAP PROCESSING

DEMOLITION

MATERIAL HANDLING

RAILWAY

CUSTOM UNITS

EARTH DRILLS, TRENCHERS & OTHER ATTACHMENTS(FOR EXCAVATORS, SKIDSTEERS & TELEHANDLERS)

1

3

2

4

5

6

7

8

9

10

CONSTRUCTION - TILTROTATORS3

360°2017

What has now become a worldwide operating company once started in a small garage in the Bavarian uplands. Innovation and quality have made the company what it is today: a global player in the construction industry. Kinshofer can count on a range of subsidiaries and sales offices worldwide to promote its products.

Kinshofer France S.A.R.L. FRANCE

1986

Kinshofer Aponox Oy FINLAND2009

Kinshofer North America CANADA2000

Kinshofer UK UNITED KINGDOM1984

Kinshofer GmbHHeadquarters Marienstein, GERMANY1971

DEMAREC B.V. THE NETHERLANDS

2006

RF-System ABSWEDEN

2011

Darda Kinshofer Construction Machinery Co. Ltd.

PR CHINA2008

Kinshofer USA UNITED STATES OF AMERICA

2013

AUGER TORQUE Europe Ltd.UNITED KINGDOM

2015

kinshofer Worldwide

A History of Quality and Success For more than 45 years we have specialized in the development and construction

of quality attachments for cranes and excavators. Within the industry, our name has become synonymous for innovation, quality and reliability!

ALWAYS IN MIND – OUR CLIENT‘S NEEDS

THERE IS NO ALTERNATIVE TO QUALITY

KINSHOFER GmbH is one of the leading manufacturers of attachments for loader cranes and hydraulic excavators, as well as for rotators, Tiltrotators and rotary actuators. The headquarters of the global company is located in the Bavarian village Waakirchen/Marienstein, Germany. Originally named KINSHOFER Maschinenbau Miesbach, the company was founded by Alfred Kinshofer on August 4, 1971 in Miesbach, Bavaria, Germany. At the beginning the small business only produced bridge bearings, handrails and accessories for brick factories, such as tunnel kiln trucks or lifting and lowering devices for tile presses. Two years after the company‘s founding, the development of the first brick stack grapple began. Just one year later, the construction of a pallet fork and a clamshell bucket followed. As the capacities of the original factory had been exhausted, a new plant was built in eastern Miesbach in 1975. Only two years later, this building had grown too small again, so a second building was constructed with additional office buildings. In 1979, the company‘s first rotator with 360° endless rotation was developed. The company changed its name to KINSHOFER Greiftechnik GmbH in 1980, and the first sales activities in the United States and the UK took place. In 1984, the first foreign sales subsidiary of the company was founded in Stockport, Cheshire, England: KINSHOFER UK Ltd. Alfred Kinshofer sold his shares in 1987, but kept being a worthy consultant for the company. The same year, KINSHOFER France was founded in Strasbourg, France. Planning began in 1997 for factories in the Austrian village of Gmünd and the Czech České Velenice, and one year later MARS Greiftechnik was founded and production started.In the year 2000, KINSHOFER made the step overseas and acquired the Canadian company Liftall which was to become the subsidiary KINSHOFER North America. A major milestone for KINSHOFER occurred in 2003: the development of the patented HPXdrive that bestowed the if-Silver Award for ”Product Design“ in the ”Industry“ branch upon the company. In 2006, the company finally got its current name: KINSHOFER GmbH. The same year, the Dutch specialist for demolition and recycling tools Demarec B.V. was acquired.The worldwide operating Swedish company Lifco AB acquired KINSHOFER GmbH in 2007. Another logical consequence was the expansion to the east, and so the company Darda KINSHOFER Construction Machinery Co. Ltd. was founded in 2008 in the Chinese capital of Beijing. The same year marks the foundation of KINSHOFER Aponox Oy in Hämeenlinna, Finland with the main focus on NOX Tiltrotators. As the year 2011 came to an end, KINSHOFER acquired the Swedish company RF-System AB, as well as the intellectual property and distribution rights of New Zealand‘s Wedgelock Equipment Ltd. at the beginning of 2012, further broadening the available product range. In 2013, the new KINSHOFER US factory opened in Sanborn in the state of New York.KINSHOFER and the UK based company Auger Torque Europe Limited announced on February 3rd 2015 that they have signed a definite agreement to merge. Under the terms of the agreement KINSHOFER has acquired 100% of the shares of Auger Torque Europe Ltd. and Auger Torque Australia Pty Ltd.. Auger Torque is a manufacturer of earth drills, augers, trenchers and other high quality attachments for excavators, skidsteers, backhoes, telehandlers, tractors, truck cranes & more.

KINSHOFER counts on a high vertical integration. The products are designed in the proper development department, constructed and finally tested in the in-house test laboratory. Thus the company retains control not only over the production, but also the product itself. Constant communication and information exchange between the company and its clients results in further developments and innovations that keep the company close to the customer.In the Action Park at the company‘s headquarters, there is also the possibility for dealers and clients to take part in training and tool demonstrations. Always close to the client – up front, everywhere ...

Many Applications One Solution

DEMOLITION Primary Demolition Secondary Demolition Steel

CONSTRUCTION Landscaping Snow Removal Road Construction Civil Engineering Utilities

SCRAP PROCESSING Scrap Metal Scrap Tires Scrap Rails

Within the range of attachments for construction, you can find different and versatile tools made by KINSHOFER for tasks from landscaping to road construction. Buckets and Clamshell buckets for different operating weights and in different widths, suitable adapters and quick hitches are part of the product range as well as smaller demolition and sorting grabs, multi purpose grabs, rock grabs, augers and brushes for dirt and snow removal. Innovations not missed are the unique cylinderless nox Tiltrotator, the revolutionary HPXdrive – no hoses, no hydraulic cylinders, easy shell exchange and absolutely maintenance-free – or the C-VE series with its fast shell exchange system!

Scrap processing has become an increasingly important concern throughout the world. Scrap metal has to be cut, broken, handled, separated, processed and recycled, similar to plastic, glass, and tires.Rail scrap processing is just one important part of the large scrap industry.At KINSHOFER you will find the perfect tool for your task, no matter if you want to cut beams, rails, tires, containers, tanks or entire ships! Entrust KINSHOFER with your scrap processing task – we will find the perfect solution for you!

No matter if demolishing, breaking, comminuting or separating – with DEMAREC attachments for demolition and recycling you will always have the perfect tool.With attachments for a broad scope of machines, reaching from demolition grabs for lighter weight excavators up to dedicated shears for heavy excavators – the perfect solution for each weight and task is available. Innovations do not fall short: the MQP with its strong power thanks to the DemaPower-cylinder, or the DemaLink, making the exchange of jaws possible within only a few minutes on site!

kinshofer Over 45 years of experience as well as involvement with en d users

in the development process, combined with the latest engineering tools, have led to KINSHOFER‘s comprehensive product range.

CUSTOM UNITS Construction Off-Shore Nuclear Pipeline / Geothermal

MATERIAL HANDLING Waste Bulk Material Dry Cargo Timber

RAIL Rail Track Construction Rail Track Maintenance Scrap Rails

It makes no difference whether you are loading or discharging boat or train carriages, handling scrap or wood or performing demolition tasks – within the KINSHOFER range »Material Handling« you are sure to find the optimal tool. Orange peel grabs with different capacities and designs are part of the available tools as well as demolition and sorting grabs, re-handling clamshell buckets or timber grabs. Outstanding: The re-handling clamshell bucket range with the incredible volume of up to 5000 litres / 6.54 c.y.!

As the tasks to be accomplished are becoming more and more complex, the requirements to be met increase accordingly. Many times, no standard tool can meet to solve clients‘ demands and thus, only a custom-made product can solve the problem. Our existing products for custom and special solutions range from tools for off-shore operations, nuclear tasks to geothermal appli-cations. You have a certain problem on hand requiring a special solution? KINSHOFER will find the perfect answer for you and your task!

There is hardly another invention that has changed the transport system as much as the railway. Railroads have, and continue, to play a large role in the way people and products are transported around the world. It is vital that railways are kept operational and safe.No matter if it is about the construction, maintenance or demolition of railroad tracks: the KINSHOFER range meets every demand, ranging from sleeper layers and ballast tampers to large mobile rail cutters. Find everything you need and more in one single company!


Tiltrotators ...... are an essential part of today‘s construction sites!

From works on narrow train platforms to sewer or rail maintenance tasks - the KINSHOFER cylinderless Tiltrotator is THE choice

It’s hard to imagine a construction site that would not benefit from a tiltrotator – especially ones with tight working spaces. Thanks to the KINSHOFER Tiltrotator, not only the time and cost intensive repositioning of your excavator will be eliminated, but also new possibilities for an effective use of your attachments will be opened to you by using this universal joint. – The fast and easy exchange of tools by using a quick hitch on the tiltrotator is another important feature that allows you to work more efficiently, especially in combination with the precise and smooth KINSHOFER control system.

360°


—> Further information about KINSHOFER products can be found on our web site www.kinshofer.com

Contents

Summary Listed by Operating Weight of Excavator 8

PremiumLine 8

NOX Tiltrotator Main Benefits 10

Control Systems for NOX Tiltrotators 11

Technical Data NOX Tiltrotators

TR06NOX for Excavators with 3t - 6t / 6600 lbs - 13200 lbs Operating Weight 12TR06NOX Attachments / Sets / Mounting Options for NOX Tiltrotators 13





Grapples for NOX Tiltrotators 22

NOX Tiltrotators in Action 23

For further attachments, please check our other catalogs

Cata

log

effec

tive

Janu

ary

2017

360°

110°

NOX TILTROTATOR


Summary Listed by Operating Weight of Excavator

Legend:

horizontal cylinder (H = horizontal) HPXdrive others

Type Operating weight excavator (t)

Tiltrotators1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ... 25

TR06NOXTR10NOXTR14NOXTR19NOXTR25NOX

Gripper1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ... 25

TRG06TRG10TRG18TRG25

Clamshell Buckets1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ... 25

C07TR HPXC11TR HPX

Selector Grabs1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ... 25

D07TR HPXD11TR HPXD18TR

Multi Purpose Grabs1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ... 25

A06TRA07TR HPXA11TR HPXA18TR

9We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany 9

Worm Drive: The worm gear unit runs in its own lubricant. Low maintenance.

Cast Body: High strength of the body is

achieved by a special alloy cast material. This guarantees a long life

even in toughest applications.

Elliptic Rotary Actuator:A very low designed drive unit, featuring no hydraulic cylinders, ensures an extremely compact design. The tilting angle has been constructed larger to provide more flexibility.

NOX Cutaway


NO HYDRAULIC CYLINDERSl Compact designl No protruding, disturbing parts such as cylindersl Narrow width

LARGE TILTING ANGLEl Up to 2 x 55°l More flexibility

SERVICE FRIENDLYl Only 2 greasing pointsl Easy installationl Less wear partsl Solid cast housingl Integrated hydraulics

PATENTED TILTING FUNCTIONl Elliptic piston design, only one threadl Closed system - less damage risksl Constant tilting force

HIGH FLOW SWIVELl High flow swivel as standard - up to 180 l/min / 47.56 GPMl Large variety of attachments availablel Good tolerance against back pressure

SUITABLE KINSHOFER CONTROL SYSTEMSl Smooth controll More safety and precision

nox

Product Information Tiltrotators


CSP NOXPROP

Operators can now control the actions of their NOX Tiltrotator with two joysticks. Quick Coupler and attached tools are also operated comfortably and effectively by means of the smart NOXPROP Control System: Tilt and rotation are controlled by proportional solenoid valves and can be run simultaneously. The extra function is controlled proportionally, too. A separate display module is included. The system has been engineered by VEMCON a partner of KINSHOFER to facilitate the control of ten valves.

Proportional Control System

rotateclockwise

(cw)

tilt left

tilt right

rotate counterclockwise

(ccw)

left joystick right joystick

left buttonextra function

left proportional controller

right proportional controller

Advantages

NOX-Control Unit:l Optimized for NOX

l Can control other tiltrotatorsl 10 different user profiles possible

Configurable with Laptop and KINSHOFER-App:l Configuration softwarel Easy user interfacel Fast and easy to set up different profiles

Optional Driving Function:l

Wheel or track control

Controllability of NOX:l All parameters of NOX can

be adjusted individually

Joystick-Options:l Rotating adapter for joysticksl Original proportional joysticks of the excavator can be used

Joysticks:l Mounted as standard

Display:l High brightness displayl Legible in direct sunlightl Easy change between different profilesl Locking / unlocking of quick coupler

2 Extra Functions:l Proportionally controlled

Gripper:l Proportionally controlled

1 t 2 t 3 t 4 t 5 t 6 t ... 9 t 10 t 11 t ... 17 t 18 t ... 23 t 24 t 25 t 26 t 27 t 28 t


TiltrotatorTR06NOX

C

50°

B

A

tota

l hei

gh d

epen

ding

on

mou

nted

ad

apte

rs

quick coupler

lower quick coupler continuous rotation (360°)

tilt angle

1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t 13 t ... 18 t 19 t 20 t ... 25 t 26 t

ControlsType DescriptionCSP 2) SVAB RT controller, tilt and rotation are controlled by proportional solenoid valves and can be run simultaneously, extra function andSVAB quick coupler are controlled by on/off valvesCSP 2) NOXPROP controller, tilt, rotation and extra function are controlled by proportional solenoid valves and can be run simultaneously,NOXPROP quick coupler is controlled by on/off valves, separate display module, easy and fast installation

DF4 3) * - tilt function, extra 1 (extra 2 as an option) and quick-coupler are controlled by changing over between the functions of circuit 1- rotation function is controlled by circuit 2

DF10 4) for each function (rotate, tilt, quick change, extra 1, extra 2) separate double acting hydraulic circuit on excavator dipper* two hydraulic circuits needed; 2) installation of KINSHOFER comfort control 3) installation of control; original joysticks remain 4) original excavator control remains

Control System CSP consists of: controlbox, 2 joystick grips, wiring from joysticks to Tiltrotator, proportional pressure control valve, display

Tiltrotator Type TR06NOXunit DF10 DF4 CSP

Machine size t/lbs 3 - 6 / 6600 - 13200Breaking force max. (ISO) kN/lbf 35 / 7700Bucket width max. mm/in 1300 / 51.2Weight (from) 1) kg/lbs 120 / 264Width A 1) mm/in 187 / 7.4Length B 1) mm/in 500 / 19.7Height C 1) mm/in 370 / 14.6Tilt angle ° 2 x 50Tilt torque Nm/ft.lbs 8500 / 6269Rotation speed 1/min 9 at 40 l/min / 10.6 GPMRotation torque Nm/ft.lbs 4500 / 3319 constant at 360° continuous

Oil flow extra function 1/2 max. l/min / GPM 35 / 9.3

Hydraulic pressure max. MPa/psi rotation: 20 / 2880tilt: 25 / 3600

rotation: 20 / 2880tilt: 25 / 3600 25 / 3600

Recommended pressure in return line MPa/psi 1 / 144

Number of swivel channels extra function number 4 2 4

Number of swivel channels quick coupler number 2

1) reference: TR06NOX S40/S40

Experience and innovation have led to one of the most advanced tools for excavators – the NOX Tiltrotator: continuous 360° rotation and a tilting angle of 2 x 50° make it a universal joint. Combined with a quick change system and various attachments this means highest efficiency at any construction site. The NOX Tiltrotator range is optimally engineered to suit excavators with an operating weight from 3t / 6600 lbs to 6t / 13200 lbs. Advantages:l Precision and safety due to „smooth“ proportional control (optional).l High stability and long service life thanks to special cast housing.l Low overall height thanks to elliptic rotary actuator: large travel.l High and constant tilting force due to cylinderless rotary actuator.l No protruding parts: excavation with narrow bucket possible in small, deep canals, even under or in between existing tubes. l Low maintenance: worm drive lubricated permanently (grease).


TR06NOXAttachments / Sets / Mounting OptionsEspecially adapted to the TR06NOX, there are different attachments and sets available. Below you will find a set of the most common buckets used on the TR06NOX as well as the different available mounting options. In combination with the nox Tiltrotator, a large variety of possibilities is provided to make your carrier machine work more efficiently - in more than 3 dimensions ...

Find different tool examples on the last pages. For more possible tool combinations, please see our catalogs CONSTRUCTION - GENERAL CONSTRUCTION CONSTRUCTION - LANDSCAPING & SNOW REMOVAL

Gripperl Always mounted to the tiltrotator, no dismantling necessary when working with other attachments.l For handling posts, tubes, pallets, rocks, sewer cover, etc.l Available for S40 lower quick coupler (others on request).

Bucket Set includesl SKP Grading Bucket cleans up and shapes sites. l SKD Backhoe Bucket for trenching.l SKK Trench Bucket for narrow cable channels.

Bucket Set incl. SKP 6 / SKD 6 / SKK 6

Type Self Width Volume with Quickweight change adapter

(approx. kg/lbs) (mm/in) (litre/c.y.)SKP 6 Grading Bucket 130 / 286 1300 / 51.18 300 / 0.39 S40SKD 6 Backhoe Bucket (incl. teeth) 150 / 330 720 / 28.35 280 / 0.37 S40SKK 6 Trench Bucket 75 / 158 300 / 11.81 160 / 0.21 S40

Gripper

Type Lower quick Self Dimensions max. Opening Closing Closing Loadcoupler weight D x E x F width G time1) force capacity

(approx. kg/lbs) (mm/in) (mm/in) (sec.) (kN/ft.lbs) (kg/lbs)

TRG06 S40 40 / 88 470 x 515 x 140 / 415 / 16.34 1.5 7,5 / 5530 300 / 66018.50 x 20.28 x 5.511) at 25 l/min. / 6.61 GPM

Technical DrawingG

E

D

F

SKPSKD SKK

Tiltrotator TR06NOX Mounting Options

Type Upper bracket Lower quick coupler

S-Coupler S-Lock direct mount or S40 S40S-Coupler S-Lock direct mount or S45/S50 S45/S50Oilquick direct mount or OQ40 OQ40Hydrema direct mount or Hydrema HydremaKinshofer L-Lock direct mount or KSW03 KMS03Kinshofer L-Lock direct mount or KSW03 KHS03Kinshofer X-Lock direct mount or CMX CMXVerachtert direct mount or CW05 CW05Verachtert direct mount or CW10 CW10Martin direct mount or MH10 MH10



C

B

55°A

TiltrotatorTR10NOXExperience and innovation have led to one of the most advanced tools for excavators – the NOX Tiltrotator: continuous 360° rotation and a tilting angle of 2 x 55° make it a universal joint. Combined with quick change system and various attachments this means highest efficiency at any construction site. The NOX Tiltrotator range is optimally engineered to suit excavators with an operating weight from 5t / 11000 lbs to 10t / 22000 lbs. Advantages:l Precision and safety due to „smooth“ proportional control (optional).l High stability and long service life thanks to special cast housing.l Low overall height thanks to elliptic rotary actuator: large travel.l High and constant tilt force due to cylinderless rotary actuator.l No protruding parts: excavation with narrow bucket possible in small, deep canals, even under or in between existing tubes. l Low maintenance: worm drive lubricated permanently (grease).

optional

tota

l hei

gh d

epen

ding

on

mou

nted

ad

apte

rs

quick coupler

lower quick coupler continuous rotation (360°)tilt a

ngle


ControlType DescriptionCSP 2) SVAB RT controller, tilt and rotation are controlled by proportional solenoid valves and can be run simultaneously, extra function andSVAB quick coupler are controlled by on/off valvesCSP 2) NOXPROP controller, tilt, rotation and extra function are controlled by proportional solenoid valves and can be run simultaneously, NOXPROP quick coupler is controlled by on/off valves, separate display module, easy and fast installation

DF4 3) * - tilt function, extra 1 (extra 2 as an option) and quick coupler are controlled by changing over between the functions of circuit 1- rotation function is controlled by circuit 2

DF8 4) for each function (rotate, tilt, quick change, extra 1) separate double acting hydraulic circuit on excavator dipperDF10 4) for each function (rotate, tilt, quick change, extra 1, extra 2) separate double acting hydraulic circuit on excavator dipper* two hydraulic circuits needed; 2) installation of KINSHOFER comfort control 3) installation of control; original joysticks remain 4) original excavator control remains


Tiltrotator Type TR10NOXunit DF10 DF8 DF4 CSP

Machine size t/lbs 5 - 10 / 11000 - 22000Breaking force max. (ISO) kN/lbf 70 / 15400Bucket width max. mm/in 1600 / 63Weight (from) 1) kg/lbs 220 / 484Width A 1) mm/in 205 / 8.1Length B 1) mm/in 610 / 24Height C 1) mm/in 445 / 17.5Tilt angle ° 2 x 55Tilt torque Nm/ft.lbs 10500 / 7744Rotation speed 1/min 7,5 at 40 l/min / 10.6 GPMRotation torque Nm/ft.lbs 6500 / 4794 constant at 360° continuous

Oil flow extra function 1/2 max. l/min / GPM 40/70 / 10.6/18.5 70 / 18.5 40 / 10.6 40 / 10.6


rotation: 20 / 2880tilt: 25 / 3600

rotation: 20 / 2880tilt: 25 / 3600 25 / 3600

Recommended pressure in return line MPa/psi 1

Number of swivel channels extra function number 4 2 2 2


1) reference: TR10NOX S45/S45


TR10NOXAttachments / Sets / Mounting OptionsEspecially adapted to the TR10NOX, there are different attachments and sets available. Below you will find a set of the most common buckets used on the TR10NOX as well as the different available mounting options. In combination with the nox Tiltrotator, a large variety of possibilities is provided to make your carrier machine work more efficiently - in more than 3 dimensions ...


Gripperl Always mounted to the tiltrotator, no dismantling necessary when working with other attachments.l For handling posts, tubes, pallets, rocks, sewer cover, etc.l Available for S45 / S50 or KMS08 / KHS08 lower quick coupler (others on request).




(approx. kg/lbs) (mm/in) (litre/c.y.)SKP 12 Grading Bucket 210 / 462 1500 / 59.06 500 / 0.65 S45

SKD 10 Backhoe Bucket (incl. teeth) 210 / 462 800 / 31.50 450 / 0.59 S45

SKK 12 Trench Bucket 120 / 264 400 / 15.75 275 / 0.36 S45

Gripper


(approx. kg/lbs) (mm/in) (mm/in) (sec.) (kN/lbf) (kg/lbs)

TRG10 S45/50 80 / 176 600 x 675 x 205 /23.62 x 26.57 x 8.07 615 / 24.21 1.3 10 / 2200 500 / 1100

TRG10 KSW08 80 / 176 600 x 675 x 205 /23.62 x 26.57 x 8.07 615 / 24.21 1.3 10 / 2200 500 / 1100

1) at 25 l/min. / 6.61 GPM

Technical DrawingG

E

D

F



S-Coupler S-Lock direct mount or S45/S50 S45/S50Oilquick direct mount or OQ45 OQ45Hydrema direct mount or Hydrema HydremaKinshofer L-Lock direct mount or KSW08 KMS08Kinshofer L-Lock direct mount or KSW08 KHS08Kinshofer X-Lock direct mount or CMX CMXVerachtert direct mount or CW10 CW10Martin direct mount or MH10 MH10


SKPSKD SKK


TiltrotatorTR14NOXThis cylinderless solution features a very compact design with a narrow width and without any protruding parts. The hydraulics are integrated into the solid cast housing and the entire installation is easy. The patented tilting function is provided by the elliptic piston design with only one thread. There is the option to attach a wide range of tools that require a high oil flow and a high pressure. Option: electrical swivel for the use of 2D/3D excavating systems and extra safety requiring couplers.

Advantages:l Precision and safety due to „smooth“ proportional control (optional).l High stability and long service life thanks to special cast housing.l Low overall height thanks to elliptic rotary actuator: large travel.l High and constant tilt force due to cylinderless rotary actuator.l No protruding parts: excavation with narrow bucket possible in small, deep canals, even under or in between existing tubes. l Low maintenance: worm drive lubricated permanently (grease).

l Option: High-flow swivel up to 30 MPa / 4320 psi or electric swivel.





1 t 2 t 3 t 4 t ... 9 t 10 t 11 t 12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t ... 25 t 26 t


Machine size t/lbs 10 - 14 / 22000 - 30800Breaking force max. (ISO) kN/lbf 110 / 24200Bucket width max. mm/in 1600 / 63Weight (from) 1) kg/lbs 440 / 968Width A 1) mm/in 225 / 8.9Length B 1) mm/in 610 / 24Height C 1) mm/in 550 / 21.7Tilt angle ° 2 x 50Tilt torque Nm/ft.lbs 26000 / 19175Rotation speed 1/min 8,5 at 45 l/min / 11.9 GPMRotation torque Nm/ft.lbs 6000 / 4425 constant at 360° continuous

Oil flow extra function 1/2 max. l/min / GPM SD 2): 70/40 / 18.5/10.6 HF 3): 70/120 / 18.5/31.7 SD 2): 70/40 / 18.5/10.6 SD 2): 70/40 / 18.5/10.6

HF 3): 70/120 / 18.5/31.7


rotation: 20 / 2880tilt: 30 / 4320 tilt: 30 / 4320

Recommended pressure in return line MPa/psi 2,5 / 360

Number of swivel channels extra function number 4


Number of channels separate drain line number 1

Electric swivel (optional) channels x A 12 x 0,5

1) reference: TR14NOX S45/S45 2) SD = Standard-swivel 3) HF = High-Flow-swivel

available from 1st quarter 2017

quick coupler adapter


tilt angle

tota

l hei

gh d

epen

ding

on

mou

nted

ada

pter

s

B

A

C

2x 50°


Attachments / Sets / Mounting OptionsEspecially adapted to the TR14NOX, there are different attachments and sets available. Below you will find a set of the most common buckets used on the TR14NOX as well as the different available mounting options. In combination with the nox Tiltrotator, a large variety of possibilities is provided to make your carrier machine work more efficiently - in more than 3 dimensions ...


Gripperl Always mounted to the tiltrotator, no dismantling necessary when working with other attachments.l For handling posts, tubes, pallets, rocks, sewer cover, etc.l Available for S45 / S50 or S60 lower quick coupler (others on request).




(approx. kg/lbs) (mm/in) (litre/c.y.)SKP 16 Grading Bucket 500 / 1100 1600 / 63 600 / 0.78 S60

SKD 14 Backhoe Bucket (incl. teeth) 255 / 561 800 / 31.5 500 / 0.65 S60

SKK 14 Trench Bucket 140 / 308 500 / 19.7 300 / 0.39 S60

Gripper



TRG10 S45/50 80 / 176 600 x 675 x 205 /23.62 x 26.57 x 8.07 615 / 24.21 1.3 10 / 2200 500 / 1100

TRG18 S60 113 / 249 470 x 515 x 140 / 18.50 x 20.28 x 5.51 713 / 28.07 1.7 18 / 3960 900 / 1980

1) at 25 l/min. / 6.61 GPM

Technical Drawing G

E

D

F



S-Coupler S-Lock direct mount or S45/S50/Hydrema S45/S50/ HydremaS-Coupler S-Lock direct mount or S60 S60Oilquick direct mount or OQ45 OQ45Oilquick direct mount or OQ60-5 OQ60-5Volvo/Bofors direct mount or S1/NTP10/B20 S1/NTP10/B20Kinshofer L-Lock direct mount or KSW08 KMS08Kinshofer L-Lock direct mount or KSW08 KHS08Kinshofer L-Lock direct mount or KSW10 KMS10Kinshofer L-Lock direct mount or KSW10 KHS10Kinshofer X-Lock direct mount or CMX CMXVerachtert direct mount or CW10 CW10Verachtert direct mount or CW20/CW30 CW20/CW30Martin direct mount or MH18/MH20 MH18/MH20Liebherr direct mount or SW33 SW33Liebherr direct mount or SW48 SW48

TR14NOX


SKPSKD SKK


TR19NOX TiltrotatorThis cylinderless solution features a very compact design with a narrow width and without any protruding parts. The hydraulics are integrated into the solid cast housing and the entire installation is easy. The patented tilting function is provided by the elliptic piston design with only one thread. There is the option to attach a wide range of tools that require a high oil flow and a high pressure. Option: electrical swivel for the use of 2D/3D excavating systems and extra safety requiring couplers.





Machine size t/lbs 14 - 19 / 30800 - 41800Breaking force max. (ISO) kN/lbf 150 / 33000Bucket width max. mm/in 1700 / 67Weight (from) 1) kg/lbs 580 / 1276Width A 1) mm/in 240 / 9.5Length B 1) mm/in 700 / 27.6Height C 1) mm/in 625 / 24.6Tilt angle ° 2 x 50Tilt torque Nm/ft.lbs 34000 / 25075Rotation speed 1/min 8,5 at 50 l/min / 13.2 GPMRotation torque Nm/ft.lbs 7000 / 5162 at 360° continuous


HF 3): 70/120 / 18.5/31.7


rotation: 20 / 2880tilt: 30 / 4320

rotation: 30 / 4320tilt: 30 / 4320





Electric swivel (optional) channels x A 12 x 0,51) reference: TR19NOX S60/S60 2) SD = Standard-swivel 3) HF = High-Flow-swivel





quick coupler adapter


tilt angle

tota

l hei

gh d

epen

ding

on

mou

nted

ada

pter

s

B

A

C

2x 50°


Especially adapted to the TR19NOX, there are different attachments and sets available. Below you will find a set of the most common buckets used on the TR19NOX as well as the different available mounting options. In combination with the nox Tiltrotator, a large variety of possibilities is provided to make your carrier machine work more efficiently - in more than 3 dimensions ...


Gripperl Always mounted to the tiltrotator, no dismantling necessary when working with other attachments.l For handling posts, tubes, pallets, rocks, sewer cover, etc.l Available for S60 lower quick coupler (others on request).





Gripper



TRG18 S60 113 / 249 470 x 515 x 140 / 18.50 x 20.28 x 5.51 713 / 28.07 1.7 18 / 3960 900 / 1980

1) at 25 l/min. / 6.61 GPM

Technical DrawingG

E

D

F

TR19NOXAttachments / Sets / Mounting Options



S-Coupler S-Lock direct mount or S60 S60Oilquick direct mount or OQ60-5 OQ60-5Oilquick direct mount or OQ65 OQ65Oilquick direct mount or OQ70/55 OQ70/55Volvo/Bofors direct mount or S1/NTP10/B20 S1/NTP10/B20Kinshofer L-Lock direct mount or KSW10 KMS10Kinshofer L-Lock direct mount or KSW10 KHS10Kinshofer X-Lock direct mount or CMX CMXVerachtert direct mount or CW20/CW30 CW20/30Atlas direct mount or T-620 T-620Martin direct mount or MH18/MH20 MH18/MH20Liebherr direct mount or SW33 SW33Liebherr direct mount or SW48 SW48


SKPSKD SKK


A 50°

C

B

TiltrotatorTR25NOX

tota

l hei

gh d

epen

ding

on

mou

nted

ad

apte

rs

quick coupler

lower quick coupler continuous rotation (360°)tilt a

ngle



Machine size t/lbs 18 - 25 / 39600 - 55000Breaking force max. (ISO) kN/lbf 170 / 37400Bucket width max. mm/in 2000 / 78.7Weight (from) 1) kg/lbs 780 / 1716Width A 1) mm/in 260 / 10.2Length B 1) mm/in 760 / 29.9Height C 1) mm/in 650 / 25.6Tilt angle ° 2 x 50Tilt torque Nm/ft.lbs 44000 / 32450Rotation speed 1/min 8,5 at 60 l/min / 15.9 GPMRotation torque Nm/ft.lbs 8000 / 5900 constant at 360° continuous


HF 3): 70/150 / 18.5/39.6


rotation: 20 / 2880tilt: 30 / 4320 tilt: 30 / 4320





Electric swivel (optional) channels x A 12 x 0,5

1) reference: TR25NOX S70/S70 2) SD = Standard-swivel 3) HF = High-Flow-swivel





Experience and innovation have led to one of the most advanced tools for excavators – the NOX Tiltrotator: continuous 360° rotation and a tilting angle of 2 x 50° make it a universal joint. Combined with quick change system and various attachments this means highest efficiency at any construction site. The NOX Tiltrotator range is optimally engineered to suit excavators with an operating weight from 18t / 39600 lbs to 25t / 55000 lbs.




Especially adapted to the TR25NOX, there are different attachments and sets available. Below you will find a set of the most common buckets used on the TR25NOX as well as the different available mounting options. In combination with the nox Tiltrotator, a large variety of possibilities is provided to make your carrier machine work more efficiently - in more than 3 dimensions ...


Gripperl Always mounted to the tiltrotator, no dismantling necessary when working with other attachments.l For handling posts, tubes, pallets, rocks, sewer cover, etc.


Bucket Set including SKP 24 / SKD 22 / SKK 22



Gripper


(approx. kg/lbs) (mm/in) (mm/in) (sec.) (kN/lbf ) (kg/lbs)

TRG18 S60 113 / 249 470 x 515 x 140 / 18.50 x 20.28 x 5.51 713 / 28.07 1.7 18 / 3960 900 / 1980

TRG25 S70 195 / 429 895 x 760 x 29535.2 x 29.9 x 11.6

1100 / 43.31 2,0 19,5 /

42901400 / 3080

1) at 25 l/min. / 6.61 GPM

Technical DrawingG

E

D

F

TR25NOXAttachments / Sets / Mounting Options



S-Coupler S-Lock direct mount or S60 S60S-Coupler S-Lock direct mount or S70 S70Oilquick direct mount or OQ70 OQ70Oilquick direct mount or OQ70/55 OQ70-55Volvo / Bofors direct mount or S1/NTP10/B20 S1/NTP10/B20Volvo / Bofors direct mount or S2/NTP20/B27 S2/NTP20/B27Kinshofer L-Lock direct mount or KSW21 KMS21Kinshofer L-Lock direct mount or KSW21 KHS21Kinshofer X-Lock direct mount or CMX CMXVerachtert direct mount or CW20/CW30/CW40 CW20/CW30/CW40Martin direct mount or MH18/MH20 MH18/MH20Liebherr direct mount or SW33 SW33Liebherr direct mount or SW48 SW48


SKPSKD SKK


22

Grapples for NOX Especially adapted to TR06NOX, TR10NOX and TR19NOX there are different attachments available. As a specialist in development and construction of excavator attachments, KINSHOFER offers a range of multi purpose grabs and demolition and sorting grabs – both can be used for more than one specific job.

In combination with the nox Tiltrotators, a large variety of possibilities is provided to make your carrier machine work more efficiently - in more than 3 dimensions ...

Find different tool examples on the next pages.


C-Series Clamshell Buckets / A-Series Multi Purpose Grabs / D-Series Selector Grabs

Type Width E Opening Volume Height Height Weight* Load Closing Excavator (w/o teeth) C max. C min. capacity force** operating weight

(mm/in) A (mm/in) (liter/c.y.) (mm/in) (mm/in) (kg/lbs) (kg/lbs) (kN/lbf ) (t/lbs)C07TR HPX 600 / 23.6 1170 / 46.1 170 / 0.22 670 / 26.4 395 / 15.6 325 / 715 3000 / 6600 22 / 4840 3-7 / 6600-15400C11TR-40 HPX 400 / 15.7 1310 / 51.6 145 / 0.19 730 / 28.7 410 / 16.1 265 / 583 3000 / 6600 22 / 4840 5-11 / 11000-24200C11TR-60 HPX 600 / 23.6 1310 / 51.6 220 / 0.29 730 / 28.7 410 / 16.1 315 / 693 3000 / 6600 22 / 4840 5-11 / 11000-24200A06TR 400 / 15.7 1480 / 58.3 70 / 0.09 695 / 27.4 630 / 24.8 190 / 418 2000 / 4400 21 / 4620 3-6 / 6600-13200A07TR HPX 400 / 15.7 1530 / 60.2 100 / 0.13 900 / 35.4 560 / 22.0 285 / 627 1000 / 2200 19 / 4180 3-7 / 6600-15400A11TR HPX 500 / 19.7 1650 / 65.0 200 / 0.26 1030 / 40.6 580 / 22.8 355 / 781 2500 / 5500 14 / 3080 5-11 / 11000-24200A18TR 600 / 23.6 1870 / 73.6 260 / 0.34 1220 / 48.0 1120 / 44.1 480 / 1056 3000 / 6600 30 / 6600 9-18 / 19800-39600D07TR HPX 400 / 15.7 950 / 37.4 60 / 0.08 620 / 24.4 355 / 14.0 253 / 557 1000 / 2200 26 / 5720 3-7 / 6600-15400D11TR-50 HPX 500 / 19.7 1400 / 55.1 125 / 0.16 840 / 33.1 410 / 16.1 306 / 673 1000 / 2200 18 / 3960 5-11 / 11000-24200D11TR-60 HPX 600 / 23.6 1400 / 55.1 200 / 0.26 840 / 33.1 410 / 16.1 355 / 781 1000 / 2200 18 / 3960 5-11 / 11000-24200D18TR-60 600 / 23.6 1555 / 61.2 225 / 0.29 1000 / 39.4 850 / 33.5 390 / 858 3000 / 6600 36 / 7920 9-18 / 19800-39600D18TR-84 840 / 33.1 1890 / 74.4 380 / 0.50 1195 / 47.0 1000 / 39.4 730 / 1606 5000 / 11000 42 / 9240 9-18 / 19800-39600* weight w/o quick change adapter and hydraulic hoses ** at 26 MPa (260 bar) / 3744 psi

C m

axC

min

A E

C m

axC m

in

A E

C m

in

EA

C m

ax

C11TR HPX

Requirements of Excavator

C07TR HPX / C11TR HPX A06TR A07TR HPX / A11TR HPX A18TRD07TR HPX / D11TR HPX D18TR

Operating pressure: max. 32 MPa (320 bar) / 4608 psi

max. 24 MPa (240 bar) / 3456 psi

max. 32 MPa (320 bar) / 4608 psi

max. 32 MPa (320 bar) / 4608 psi

Pump capacity: 40 - 120 l/min / 10.6 - 31.7 GPM

25 - max. 75 l/min / 6.6 - max. 19.8 GPM

25 - 60 l/min / 6.6 - 15.9 GPM

50 - 100 l/min / 13.2 - 26.4 GPM

Technical Drawings

D18TRA11TR HPX

A06TR


NEWTR14NOX / TR19NOX


24

3-in-1-BucketThe SK3 3-in-1-Bucket in combination with a nox Tiltrotator enables you to do digging and grading jobs as well as ridging V-shaped trenches more fast, easily and precisely, without changing the attachments.

... more than

Fork Application

With a GAF fork mounted to a nox Tiltrotator you can position loads even at places you would have to quit with

a loader or fork truck.

Grapple OperationThe combination of the NOX Tiltrotator

and a Multi Purpose Grab makes your excavator an allround machine. Digging,

grabbing, positioning, backfilling and sorting - it is all possible with the Multi Purpose Grab. Another versatile tool:

the D-series Demolition and Sorting Grab range for NOX Tiltrotators.


25

just 3 dimensions

Gripping ApplicationJust trust Kinshofer’s 45 years of experience in designing and manufacturing excavator attachments and combine the NOX with any kind of grab or clamshell bucket. The HPXdrive grapples make your Tiltrotator an absolute power pack without any hydraulic cylinders!

Difficult to access...?

...not with a nox Tiltrotator!As no protruding cylinders are disturbing,

you can dig close to the obstacle.

Grading BucketThe NOx Tiltrotator in combination with the SKP - Grading Bucket is the perfect addition to your excavator when you are e.g. grading, backfilling or levelling a construction site.

Skeleton Bucket

The nox Tiltrotator helps sorting rocks from gravel by just moving

the SKG Skeleton Bucket.


KINSHOFER is an ISO 9001 certified Company. DVS ZERT is a registred trademark of DVS ZERT® e.V., Düsseldorf.

www.kinshofer.com

Upfront, everywhere

Nederland: DEMAREC Demolition and Recycling Equipment B.V.De Hork 325431 NS CuijkTel.: +31 (0)485 442300Fax: +31 (0)485 442120Email: [email protected]

Sverige: RF System AB Furutorpsgatan 6288 34 VinslövTel.: +46 (0)44 817 07Fax: +46 (0)44 859 63Email: [email protected]

United Kingdom:Auger Torque Europe LimitedHazletonCheltenham, GL54 4DXTel.: +44 (0)1451 861 652Fax: +44 (0)1451 861 660Email: [email protected]

Australia:Auger Torque Australia Pty Ltd.122 Boundary Road, RockleaQueensland 4106Tel.: +61 (0) 7 3274 2077Fax: +61 (0) 7 3274 5077Email: [email protected]

中国:Auger Torque China CO., Ltd.Baozhan Rd, Tongyi Industry ZoneDongwu, Yinzhou, NingboChina 315114Tel.: + 86 (0) 574 8848 8181 Fax: + 86 (0) 574 8848 8687 Email: [email protected]

Hauptsitz Deutschland: Kinshofer GmbHHauptstrasse 7683666 WaakirchenTel.: +49 (0)8021 – 88 99 0Fax: +49 (0)8021 – 88 99 37Email: [email protected]

United Kingdom:Kinshofer UK Ltd.4 Milton Industrial CourtHorsfield Way, BredburyStockport, Cheshire, SK6 2TATel.: +44 (0)161 – 406 7046Fax: +44 (0)161 – 406 7014Email: [email protected]

France: Kinshofer France S.A.R.L.8 Bis, rue Gabriel VoisinCS 4000351688 Reims Cedex 2Tel.:   +33(0) 3 88 39 55 00Fax:   +33(0) 3 88 79 06 75Email: [email protected]

Canada: Kinshofer North America5040 Mainway Drive, Unit #11Burlington, ON L7L 7G5Tel.: +1 (905) 335 2856Fax: +1 (905) 335 4529Toll Free (North America): 1 (800) 268 9525Email: [email protected]

United States of America:Kinshofer USA6420 Inducon DriveSuite GSanborn, NY, 14132Tel.: +1 (716) 731 4333Toll Free (North America): 1 (800) 268 9525Email: [email protected]

中国: Darda Kinshofer Construction Machinery Co. Ltd.Unit #306, Landmark Tower 28 Dongsanhuan Road Beijing 100004Tel.: +86 (10) 6590 6422Fax: +86 (10) 6590 6423Email: [email protected]

Suomi: Kinshofer Finland OyRealparkinkatu 9 37570 LempääläTel.: +358 (0)75 7540 200Fax: +358 (0)3 6870 466Email: [email protected]

EXA

-KIN

-TIL

T-E-

0117

construction – general construction construction – quick hitches …€¦ · ·...

Documents