conrod agista
DESCRIPTION
conrodTRANSCRIPT
1. Gambar CAD.
2. Tentukan jenis pembuatannya (menggunakan Milling).
3. Pilih permukaan yang akan dibuat.
4. Pilih tool yang akan digunakan.
5. Memulai proses simulasi.
4. Proses simulasi.
5. Memproses G-code dengan meng-klik post process.
6. G-code yang dihasilkan: (PGM, NAME="1234"); T21 D=6 CR=3 - ZMIN=-1 - BALL END MILL: G90 G40 G94G17G71M26; 2D CONTOUR2M9M26:T21 M6M26S20500 M3H0M8G0 X-32.388 Y12.065Z15Z5G1 Z1 F1000Z-0.4X-32.387 Y12.058 Z-0.494X-32.385 Y12.036 Z-0.585X-32.381 Y12 Z-0.672X-32.375 Y11.952 Z-0.753X-32.368 Y11.891 Z-0.824X-32.36 Y11.82 Z-0.885X-32.351 Y11.74 Z-0.935X-32.341 Y11.654 Z-0.971X-32.331 Y11.563 Z-0.993X-32.32 Y11.469 Z-1X-32.253 Y10.873 F4000G17 G3 X-31.589 Y10.345 I-31.656 J10.941G1 X28.109 Y17.12 F5200G2 X30.953 Y12.49 I28.447 J14.139G3 X30.186 Y-11.237 I49.932 J0G2 X27.267 Y-15.705 I27.578 J-12.721G1 X-30.924 Y-9.641G2 X-32.93 Y-4.751 I-30.613 J-6.657G3 X-33.385 Y5.256 I-38.707 J0G2 X-31.589 Y10.345 I-31.25 J7.364G3 X-31.06 Y11.008 I-31.656 J10.941 F4000G1 X-31.128 Y11.605X-31.139 Y11.698 Z-0.993X-31.149 Y11.789 Z-0.971X-31.159 Y11.875 Z-0.935X-31.168 Y11.955 Z-0.885X-31.176 Y12.026 Z-0.824X-31.183 Y12.087 Z-0.753X-31.188 Y12.136 Z-0.672X-31.192 Y12.172 Z-0.585X-31.195 Y12.193 Z-0.494X-31.196 Y12.201 Z-0.4G0 Z15M9M26G0 X0 Y0M30M2
TUGAS 6CAD/CAMDosen Pengampu : Norman Iskandar,S.T M.T
Agista Karmelia21050113120024S1 Teknik Mesin
UNIVERSITAS DIPONEGOROSEMARANG