connection and configuration options of foto control 1f invertors
DESCRIPTION
Connection and configuration options of VONSCH FOTO CONTROL 1f invertors. Designed and made in EU.TRANSCRIPT
Connectionoptions of inverters
FOTO CONTROL 1f
The Sun Shines For All... We know the solutions to make it work for you
Normal on-grid connection
Grid connection Maximization of power (from PV panels) - MPPT Inverter stops working after grid disconnection
Island mode operation – basic connection(off-grid) Off-grid connection Energy flows from the 48V battery
RM – GRID MONITORProperties
Separate device mountable on a DIN railrequires 24V DC power supply
Features Monitoring the energy flow Phase voltage and current
monitoring Switching of two external
appliances
Power control – self-consumption cover Grid connection, grid current is monitored by RM GRID MONITOR Inverter controls the power, to ensure the current supplied to the grid is "zero"
Power control – self-consumption cover Inverter turns off when the consumption is below the minimum
power threshold
Power control – limiting of the consumption from the grid Grid connection, grid current is monitored by RM GRID MONITOR Inverter controls the power to ensure the grid current does not
exceed the set value of the current
Power control – limiting the consumption from the grid, battery charging Grid connection, grid current is monitored by RM GRID MONITOR Inverter controls the power to ensure grid current does not exceed
the set value of the current
Extension of island (off-grid) system to three-phase system Using the RM SYNC synchronization module
1f HYBRID SYSTEM Using the RM SYNC synchronization module
3f HYBRID SYSTEM Using the RM SYNC synchronization module
POWER MEASUREMENT – LOAD SWITCHING
Using the RM GRID MONITOR measurement module
POWER MEASUREMENT – HYBRID SYSTEM Using the RM GRID MONITOR measurement module and the RM
SYNC synchronization module