conformity of the factory production control
TRANSCRIPT
Certificate Conformity of the
factory production control
according Regulation 305/2011/EU: System 2+
Certificate number: 0035-CPR-A254
In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation - CPR), this certificate applies to the construction product:
Scope: Hot Rolled Products of Structural Steels for metal structures or in composite metal and concrete structures, see Annex
Name and address of the manufacturer:
Dongkuk Steel Mill Co.,Ltd. 25, Godaegongdan1-gil, Songak-eup, Dangjin-si, Chungcheongnam-do 31719 Korea
Manufacturing plant:
Dongkuk Steel Mill Co.,Ltd. 25, Godaegongdan1-gil, Songak-eup, Dangjin-si, Chungcheongnam-do 31719 Korea
Specification: This certificate attests that all provisions concerning the assessment and verification of constancy of performance described in Annex ZA of the standard(s):
EN 10025-1:2004
under system 2+ are applied and that the factory production control fulfills all the prescribed requirements set out above.
Validity period: This certificate was first issued on 08.04.2010 and will remain valid as long as the test methods and/or factory production control requirements included in the harmonized standard used to assess the performance of the declared characteristics, do not change, and the product, and the manufacturing conditions in the plant are not modified significantly, but not longer than 31.03.2022.
Cologne, March 17, 2019
TÜV Rheinland Industrie Service GmbH Notified Body for construction products (NB 0035) Am Grauen Stein 51105 Köln, Deutschland e-mail: [email protected]
i.A. Dipl.-Ing. A. Makowka
Certification body for construction products
Rev. 3
Annex to Certificate No. : 01 202 ROK/Q 10 0044 / 0035-CPR-A254
E-100-E-Questionnaire MM-Form8-Scope-Rev22 Rev. 22
Scope according to
Directive 2014/68/EU Annex I §4.3
EN 764-4 AD 2000-Merkblatt W0
FPC, Regulation (EU) No. 305/2011(System 2+)
Manufacturer Work Nationality Date Page No..
Company Name: Dongkuk Steel Mill Co., Ltd. Dangjin Korea 03 May 2016 1 TÜ V Rheinland
Industrie Service
Location: 25, Godaegongdan 1-gil , Songak-eup, Gangjin-si, Chungcheongnam-do 31719 Korea
Rev.: 3 of : 3 GmbH
Cur
-
Materials-term Materials-No.
Material Specification
Delivery Cond.
Article Type of Product
Dimensions Weight max
Technical Specifications
Remarks
Thick-ness Requirements
mm mm 1=t / 2=kg
Technical Regulations
from Up to
from Up to
result
1 2 3 4 5 6a 6b 7a 7b 8a 8b 9 10
1. Materials according to harmonized European standards (hEN) and European Approval for Materials (EAM) acc. Directive 2014/68/EU
The use of the materials according to Directive 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval or to the
particular material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved. The requirements and limits
of the applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.
1
S235JR+N, S235J2+N, S275JR+N, S275J2+N, S355J2+N, S355K2+N
EN 10025-2:2004 +AR +N
Hot rolled plate
4.5 100 - - - - EN 10025-1:2004 EN 10029
The materials meet the general mechnical and technological requirements for the PED. The pressure equipments manufacturer must define the specific operation condition. As applicable, the pressure equipment manufacturer or the notified body involved has to
agree(See PED, Annex Ⅰ, sec. 4.2)
PMA is requested for material grades mentioned in non harmonized standards.
2 P275NL1, P275NL2, P355N, P355NL1, P355NL2
EN 10028-3:2009 +N +NT
Hot rolled plate
4.5 100 - - - - EN 10028-1:2009 EN 10029
Remarks +AT = solution annealed +NT = normalized and tempered a = PMA for the use in pressure equipment +AR = as rolled +QT = quenched and tempered in Directive 2014/68/EU neccessary +M = thermo mechanical treated +S = soft annealed +N = normalized or normalizing formed +SR = stress relieved
Annex to Certificate No. : 01 202 ROK/Q 10 0044 / 0035-CPR-A254
E-100-E-Questionnaire MM-Form8-Scope-Rev22 Rev. 22
Scope according to
Directive 2014/68/EU Annex I §4.3
EN 764-4 AD 2000-Merkblatt W0
FPC, Regulation (EU) No. 305/2011(System 2+)
Manufacturer Work Nationality 03 May 2016 Page No..
Company Name: Dongkuk Steel Mill Co., Ltd. Dangjin Korea 2 TÜ V Rheinland
Rev.:3 Industrie Service
Location: 25, Godaegongdan 1-gil , Songak-eup, Gangjin-si, Chungcheongnam-do 31719 Korea
of : 3 GmbH
Cur
-
Materials-term Materials-No.
Material Specification
Delivery Cond.
Article Type of Product
Dimensions Weight max
Technical Specifications
Remarks
Thick-ness Requirements
mm mm 1=t / 2=kg
Technical Regulations
from Up to
from Up to
result
1 2 3 4 5 6a 6b 7a 7b 8a 8b 9 10
2. Materials according to international standards ( e. g. ASTM, ASME, IBR etc. )
The use of the materials according to DGR 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval or to the
particular material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved. The requirements and limits
of the applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.
4 C ASTM A283 / ASME SA283
+AR, +M Hot rolled plate
5 60 - - - - ASTM A283 / ASME SA283
5 C ASTM A285 / ASME SA285
+AR Hot rolled plate
5 40 - - - - ASTM A285 / ASME SA285
6 - ASTM A36 / ASME SA36
+AR Hot rolled plate
5 203 - - - - ASTM A36 / ASME SA36
7 60, 65, 70 ASTM A516 / ASME SA516
+AR, +N Hot rolled plate
5 100 - - - - ASTM A516 / ASME SA516
8 Cl1 ASTM A537/ ASME SA537
+N Hot rolled plate
5 70 - - - - ASTM A537/ ASME SA537
9 50 ASTM A572 / ASME SA572
+AR, +N, +M
Hot rolled plate
5 100 - - - - ASTM A572 / ASME SA572
10 70 ASTM A573 / ASME SA573
+N Hot rolled plate
5 40 - - - - ASTM A573 / ASME SA573
Results +AT = solution annealed +NT = normalized and tempered a = PMA for the use in pressure equipment +AR = as rolled +QT = quenched and tempered in Directive 2014/68/EU neccessary +M = thermo mechanical treated +S = soft annealed +N = normalized or normalizing formed +SR = stress relieved
Annex to Certificate No. : 01 202 ROK/Q 10 0044 / 0035-CPR-A254
E-100-E-Questionnaire MM-Form8-Scope-Rev22 Rev. 22
Scope according to
Directive 2014/68/EU Annex I §4.3
EN 764-4 AD 2000-Merkblatt W0
FPC, Regulation (EU) No. 305/2011(System 2+)
Manufacturer Work Nationality Date Page No..
Company Name: Dongkuk Steel Mill Co., Ltd. Dangjin Korea 08 Apr. 2014 3 TÜ V Rheinland
Industrie Service
Location: 25, Godaegongdan 1-gil , Songak-eup, Gangjin-si, Chungcheongnam-do 31719 Korea
Rev.:0 of : 3 GmbH
Cur
-
Materials-term Materials-No.
Material Specification
Delivery Cond.
Article Type of Product
Dimensions Weight max
Technical Specifications
Remarks
* Thick-ness
Requirements
mm mm 1=t / 2=kg
Technical Regulations
from Up to
from Up to
result
1 2 3 4 5 6a 6b 7a 7b 8a 8b 9 10
3. Details of Validity of the factory production control of hot rolled Products of Structural Steels and Stainless Steels
in accordance to Regulation 305/2011/EU: System 2+
1
2
3
S235JR, S235J0, S235J2, S275JR, S275J0, S275J2, S355JR, S355J0, S355J2,
S355K2,
S275N, S275NL, S355N, S355NL, S420N, S420NL
S275M, S275ML, S355M, S355ML, S420M, S420ML, S460M, S460ML
EN 10025-2
EN 10025-3
EN 10025-4
+AR +N +M
+N
+M
Plate
Plate
Plate
4.5
4.5
4.5
100
100
100
- - -
- -
- -
- -
EN 10025-1:2004, EN 10029
EN 10025-1:2004, EN 10029
EN 10025-1:2004, EN 10029
Remarks +AT = solution annealed +NT = normalized and tempered a = PMA for the use in pressure equipment +AR = as rolled +QT = quenched and tempered in Directive 2014/68/EU neccessary +M = thermo mechanical treated +S = soft annealed +N = normalized or normalizing formed +SR = stress relieved