configuration file 1841

Upload: rhonda-jackson

Post on 06-Apr-2018

221 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/2/2019 Configuration File 1841

    1/2

    FC-CPE-1#show runBuilding configuration...

    Current configuration : 1246 bytes!

    version 12.4service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname FC-CPE-1!boot-start-markerboot-end-marker!enable password class!

    no aaa new-modelip cef!no ip domain lookupip auth-proxy max-nodata-conns 3ip admission max-nodata-conns 3!interface FastEthernet0/0ip address 10.0.0.1 255.255.255.0ip access-group Server-Access induplex autospeed auto!

    interface FastEthernet0/1ip address 172.17.0.1 255.255.0.0duplex autospeed auto!interface Serial0/0/0no ip addressshutdownclock rate 125000!interface Serial0/0/1no ip address

    shutdownclock rate 125000!ip forward-protocol nd!!ip http serverno ip http secure-server!ip access-list extended Server-Accessremark Allow PC1 access to serverpermit tcp host 10.0.0.10 host 172.17.1.1 eq www logremark Allow PC2 to access web server

    permit tcp host 10.0.0.201 host 172.17.1.1 eq www logremark Allow PC1 to telnet routerpermit tcp host 10.0.0.10 host 10.0.0.1 eq telnet log

  • 8/2/2019 Configuration File 1841

    2/2

    remark Deny all other trafficdeny ip any any log!control-plane!line con 0line aux 0

    line vty 0 4password telnetlogin!scheduler allocate 20000 1000end

    FC-CPE-1#show verCisco IOS Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 12.4(23), RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2008 by Cisco Systems, Inc.

    Compiled Sat 08-Nov-08 20:07 by prod_rel_team

    ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

    FC-CPE-1 uptime is 9 minutesSystem returned to ROM by power-onSystem image file is "flash:c1841-124-23.bin"

    This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.

    Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately.

    A summary of U.S. laws governing Cisco cryptographic products may be found at:http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

    If you require further assistance please contact us by sending email [email protected].

    Cisco 1841 (revision 7.0) with 115712K/15360K bytes of memory.Processor board ID FTX1135W0KD2 FastEthernet interfaces2 Low-speed serial(sync/async) interfaces1 Virtual Private Network (VPN) ModuleDRAM configuration is 64 bits wide with parity disabled.191K bytes of NVRAM.31360K bytes of ATA CompactFlash (Read/Write)

    Configuration register is 0x2102

    FC-CPE-1#