Conference Program

June 4-6, 2019

Hong Kong

ISCEAS

International Scientific Conference on Engineering and Applied Sciences

ISESS

International Symposium on Education and Social Sciences

BREFM

International Conference on Business, Economics, Finance and Management

ISCEAS

International Scientific Conference on Engineering and Applied Sciences

ISBN: 978-986-89844-9-3

ISESS

International Symposium on Education and Social Sciences

ISBN: 978-986-5654-45-0

BREFM

International Conference on Business, Economics, Finance and Management

ISBN: 978-986-90827-0-9

1

Content

General Information for Participants ......................................................................................... 2

International Committees of Natural Sciences ........................................................................... 4

International Committees of Social Sciences .............................................................................. 8

Special Thanks to Session Chairs .............................................................................................. 12

Conference Venue Information .................................................................................................. 13

Conference Schedule ................................................................................................................... 17

Natural Sciences Keynote Address ............................................................................................ 19

Social Sciences Keynote Address (1) .......................................................................................... 20

Social Sciences Keynote Address (2) .......................................................................................... 21

Oral Sessions ................................................................................................................................ 23

Mechanical Engineering ..................................................................................................... 23

Environmental Science/ Power & Energy Engineering/ Fundamental and Applied

Sciences ................................................................................................................................. 25

Education ............................................................................................................................. 26

Culture/ Law ........................................................................................................................ 28

Business & Management/ Economics ................................................................................ 29

Poster Sessions (1) ....................................................................................................................... 30

Computer and Information Sciences ................................................................................. 30

Material Science and Engineering ..................................................................................... 31

Electrical and Electronic Engineering ............................................................................... 32

Business & Management .................................................................................................... 33

Biological Engineering ........................................................................................................ 34

2

General Information for Participants

Registration

The registration desk will be situated on the 1st floor at Royal Plaza Hotel during the following

time:

08:30-14:00, Tuesday, June 4, 2019

08:30-14:00, Wednesday, June 5, 2019

08:30-14:00, Thursday, June 6, 2019

A Polite Request to All Participants

Participants are requested to arrive in a timely fashion for all addresses. Presenters are reminded

that the time slots should be divided fairly and equally by the number of presentations, and that

they should not overrun. The session chair is asked to assume this timekeeping role and to

summarize key issues in each topic.

Certificate

Certificate of Presentation or Certificate of Attendance

A certificate of attendance includes participant’s name and affiliation, certifying the participation

in the conference. A certificate of presentation indicates a presenter’s name, affiliation and the

paper title that is presented in the scheduled session.

Certificate Distribution

Oral presenters will receive a certificate of presentation from the session chair at the end of the

session. Poster presenters will receive a certificate of presentation from the conference staff at

the end of their poster session.

The certificate of presentation will not be issued, either at or after the conference, to authors

whose papers are registered but not presented. Instead, the certificate of attendance will be

provided after the conference.

3

Preparation for Oral Presentations

All presentation rooms are equipped with a screen, an LCD projector, and a laptop computer

installed with Microsoft PowerPoint. You will be able to insert your USB flash drive into the

computer and double check your file in PowerPoint. We recommend you to bring two copies of

the file in case that one fails. You may also connect your own laptop to the provided projector;

however please ensure you have the requisite connector.

Preparation for Poster Presentation

Materials Provided by the Conference Organizer:

1. X-frame display & base fabric canvases (60cm×160cm)

2. Adhesive tapes or binder clips

Materials Prepared by the Presenters:

3. Home-made poster(s)

4. Material: not limited, can be posted on the canvases

5. Recommended poster size: 60cm*120cm

A 60cm*160cm poster illustrates

the research findings.

1. Wider than 60cm (left)

2. Copy of PowerPoint slides in A4 papers (right)

4

International Committees of Natural Sciences

Abdelwahab Elghareeb Cairo University Egypt

Abdmalik Serboutel University of physical and sports activities Djelfa Algeria

Abhishek Shukla R.D. Engineering College Technical Campus,Ghaziabad India

Ahmad Zahedi James Cook University Australia

Alexander M. Korsunsky Trinity College, Oxford UK

Almacen Philippine Association of Maritime Trainig Centers Philippines

Amel L. Magallanes Capiz State University Philippines

Amran Bin Ahmed University Malaysia Perlis Malaysia

Anthony D. Johnson Seoul National University of Science & Technology UK

Anthony D. Johnson Seoul National University of Science & Technology Korea

Ashley Love A.T. Still University USA

Asif Mahmood King Saud University, Riyadh Saudi

Arabia

Asmida Ismail University Technology Mara Malaysia

Baolin Wang University of Western Sydney Australia

Byoung-Jun Yoon Korea National Open University South Korea

Chang Ping-Chuan Kun Shan University Taiwan

Chee Fah Wong Universiti Pendidikan Sultan Idris Malaysia

Chee-Ming Chan Universiti Tun Hussein Onn Malaysia Malaysia

Cheng, Chun Hung The Chinese University of Hong Kong Hong Kong

Cheng-Min Feng National Chiao Tung University Taiwan

Cheuk-Ming Mak The Hong Kong Polytechnic University Hong Kong

Chia-Ray Lin Academia Sinica Taiwan

Chih-Wei Chiu National Taiwan University of Science and Technology Taiwan

Chikako Asada Tokushima University Japan

Chil Chyuan Kuo Ming Chi University of Technology Taiwan

Chi-Ming Lai National Cheng-Kung University Taiwan

Ching-An Peng University of Idaho USA

Chin-Tung Cheng National Kaohsiung (First) University of Science and

Technology Taiwan

Christoph Lindenberger Friedrich-Alexander University Germany

Daniel W. M. Chan The Hong Kong Polytechnic University Hong Kong

Deok-Joo Lee Kyung Hee University South Korea

Din Yuen Chan National Chiayi University Taiwan

Don Liu Louisiana University USA

Edward J. Smaglik Northern Arizona University USA

5

Farhad Memarzadeh National Institutes of Health USA

Fariborz Rahimi University of Bonab Iran

Fatchiyah M.Kes. Universitas Brawijaya Indonesia

Gi-Hyun Hwang Dongseo University South Korea

Gwo-Jiun Horng Southern Taiwan University of Science and Technology Taiwan

Hae-Duck Joshua Jeong Korean Bible University South Korea

Hairul Azman Roslan Universiti Malaysia Sarawak Malaysia

Hamed M El-Shora Mansoura University Egypt

Hanmin Jung Convergence Technology Research Planning South Korea

Hasmawi Bin Khalid University Teknologi Mara Malaysia

Hikyoo Koh Lamar University USA

Hiroshi Uechi Osaka Gakuin University Japan

Ho, Wing Kei Keith The Hong Kong Institute of Education Hong Kong

Hsiao-Rong Tyan Chung Yuan Christian University Taiwan

Hsien Hua Lee National Sun Yat-Sen University Taiwan

Hung-Yuan Chung National Central University Taiwan

Hyomin Jeong Gyeongsang National University South

Korea

Hyoungseop Kim Kyushu Insititute of Techonogy Japan

Jacky Yuh-Chung Hu National Ilan University Taiwan

Jeril Kuriakose Manipal University India

Jieh-Shian Young National Changhua University of Education Taiwan

Jivika Govil Zion Bancorporation India

Jongsuk Ruth Lee Korea Institute of Science and Technology Information South

Korea

Jui-Hui Chen CPC Corporation, Taiwan Taiwan

Jung Tae Kim Mokwon University South Korea

Kamal Seyed Razavi Federation University Australia Australia

Kazuaki Maeda Chubu Univeristy Japan

Kim, Taesoo Hanbat National University South

Korea

Kuang-Hui Peng National Taipei University of Technology Taiwan

Kun-Li Wen Chienkuo Technology University Taiwan

Lai Mun Kou SEGi University Malaysia

Lars Weinehall Umea University Sweden

Lee, Jae Bin Mokpo National University South Korea

M. Chandra Sekhar National Institute of Technology India

M. Krishnamurthy KCG college of technology India

6

Mane Aasheim Knudsen University of Agder Norway

Mayura Soonwera King Mongkut's Institute of Technology Thailand

Michiko Miyamoto Akita Prefectural University Japan

Minagawa, Masaru Tokyo City University Japan

Mu-Yen Chen National Taichung University of Science and

Technology Taiwan

Norizzah Abd Rashid Universiti Teknologi MARA Malaysia

Onder Turan Anadolu University Turkey

Osman Adiguzel Firat University Turkey

P. Sivaprakash A.S.L. Pauls College of Engineering & Technology India

P.Sanjeevikumar University of Bologna India

Panayotis S. Tremante

M. Universidad Central de Venezuela Venezuela

Patrick S.K. Chua Singapore Institute of Technology Singapore

Pei-Jeng Kuo National Chengchi University Taiwan

Phongsak Phakamach North Eastern University Thailand

Rainer Buchholz Friedrich-Alexander University Germany

Rajeev Kaula Missouri State University USA

Ransinchung

R.N.(Ranjan) Indian Institute of Technology India

Ren-Zuo Wang National Center for Research on Earthquake

Engineering Taiwan

Rong-Horng Chen National Chiayi University Taiwan

Roslan Zainal Abidin Infrastructure University Kuala Lumpur Malaysia

S. Ahmed John Jamal Mohamed College India

Saji Baby Kuwait University Kuwait

Samuel Sheng-Wen

Tseng National Taiwan Ocean University Taiwan

Sergei Gorlatch University of Muenster Germany

Shen-Long Tsai National Taiwan University of Science and Technology Taiwan

Sittisak Uparivong Khon Kaen University Thailand

Song Yu Fukuoka Institute of Technology Japan

Sudhir C.V. Caledonian College of Engineering Oman

Suresh. B. Gholse. Rtm Nagpur University India

Thippayarat

Chahomchuen Kasetsart University Thailand

Victor A. Skormin Binghamton University USA

Vivian Louis Forbes Wuhan University China

7

William L. Baker Indiana State University USA

Wong Hai Ming The University of Hong Kong Hong Kong

Wong Tsun Tat The Hong Kong Polytechnic University Hong Kong

Wooyoung Shim Yonsei University South Korea

Ya-Fen Chang National Taichung University of Science and

Tchonology Taiwan

Yasuhiko Koike Tokyo University of Agriculture Japan

Yee-Wen Yen National Taiwan University of Science and Technology Taiwan

Yoshida Masafumi Tokyo City University Japan

Youngjune Park Gwangju Institute of Science and Technology South Korea

Yuan-Lung Lo Tamkang University Taiwan

8

International Committees of Social Sciences

Adeeb Jarrah United Arab Emirates University UAE

Ahrar Husain Jamia Millia Islamia - A Central University Indian

Al Faithrich C. Navarrete University of Santo Tomas Philippines

Alex Yao Tang National Cheng Kung University Taiwan

Alice H. Y. Hon The Hong Kong Polytechnic University Hong Kong

Amol Gore Università degli Studi di Padova Thailand

Atefeh Ferdosipour Azad University (East Tehran Branch) Iran

Azidah Abu Ziden Universiti Sains Malaysia Malaysia

Azilawati Nanyang Technological University, Singapore Singapore

Aziz Bin Ahmad University Malaysia Terengganu Malaysia

B. Suresh Lal Kakatiya University India

Badar Alam Iqbal Aligarh Muslim University India

Bayram Akarsu Erciyes University Turkey

Bor-Tyng Wang Feng Chia University Taiwan

Brian Hunt Mahidol University Thailand

Carrie Hagan Indiana University USA

Cathine G. Scott Morris College in Sumter USA

Chang Y. Lee California State University, Chico USA

Chen-Sung Chang Nan Kai University of Technology Taiwan

Cheol Park Korea University South Korea

Chib Datta Meghe Institute of Management Studies India

Ching-Yi Tien I-Shou University Taiwan

Darshan Kaur Narang University of Rajasthan, Jaipur India

David C. Donald The Chinese University of Hong Kong Hong Kong

David Yoon Universitaire Léonard de Vinci France

Dharam Vir Mahajan CCS university, Meerut India

Donald L. Amoroso Auburn University at Montgomery USA

Donghun Lee Sungkyunkwan University South Korea

E. Daniel Shim Sacred Heart University USA

Eddy K.W. Li The Chinese University of Hong Kong Hong Kong

Edward Hwang Chung Hua University Taiwan

Emiko Tsuyuki Chuo University Japan

Ernest Lim Kok Seng Taylor's University Malaysia

Funda Varnaci Uzun Aksaray University Turkey

Gajendra Singh Satyawati College, University of Delhi India

Halil Ibrahim Gurcan Anadolu University Turkey

9

Hamzeh Dodeen United Arab Emirates University UAE

Henry Ma The Hong Kong Polytechnic University Hong Kong

Intan Soliha Binti Ibrahim Universiti Malaysia Sabah Malaysia

Irene Guatno Toribio Philippine Christian University Philippines

Jalil Safaei University of Northern British Columbia Canada

Jamie Halsall University of Huddersfield UK

Jian-Horng Chen Chung Shan Medical University Taiwan

Jill Thompson-White Edith Cowan University Australia

John Christian S. Jardin Palawan State University Philippines

Jonas Chao-Pen Yu Takming University of Science and Technology Taiwan

Jongkun Jun Hankuk University of Foreign Studies South Korea

José G. Vargas-Hernández Universidad de Guadalajara México

Joseph Lau The University of Hong Kong Hong Kong

Joy Kamakamaewailani

Rodriguez Beijing Forestry University USA

Joyce Zhou Emporia State University USA

Julia Wong Family Justice Courts Singapore Singapore

K. Prakash Vel University of Wollongong Dubai

Kaedsiri Jaroenwisan Silpakorn Univesity Thailand

Kanokphon Chantanarungpak Srinakharinwirot University Thailand

Karen Miranda Fernandez Imus Institute Philippines

Keith H. Sakuda University of Hawaiʻi - West Oʻahu USA

Kim , Kyung Hee Mokpo National University South Korea

Kim Sangho Ritsumeikan Asia Pacific University Japan

Kim, Deok Man Baekseok University South Korea

Kimble Byrd Rowan University USA

Krishna Govender AAA School of Advertising South Africa

Kurt W. Ackermann Hokusei Gakuen University Japan

Lin, Hsiao-Tseng Meiho University Taiwan

Linda Oshita University of Hwaii USA

Linda Ross Rowan University USA

Maria Cristina M. De los

Santos Kyungdong University-Global Campus South Korea

Marie Paz E. Morales Philippine Normal University Philippines

Masoud Kavoossi The George Washington University USA

Mehryar Nooriafshar University of Southern Queensland Australia

Michael Kao Chang Gung University Taiwan

Micheal Kon Aletheia University Taiwan

10

Ming-Chang Chih National Chung Hsing University Taiwan

Mingchu (Neal) Luo Emporia State University USA

Mohamad Hafis Amat Simin University Sultan Zainal Abdin Malaysia

N. S. Ravishankar Axis Bank India

Naim Uzun Aksaray University Turkey

Nezaket Memmedli Azerbaijan National Academy of Sciences Azerbaijan

Obydullah Al Marjuk Independent University, Bangladesh Bangladesh

Ozgul Keles Aksaray University Turkey

Pete C. Kutschera AMERASIAN RESEARCH NETWORK, Ltd. USA

Peter Morton Chinese Culture University Taiwan

Prasong Tanpichai Kasetsart University Thailand

Qi Wang University of Southern Denmark China

Rajesh U. Chheda Shri. MD Shah Mahila College India

Ramayah Thurasamy Universiti Sains Malaysia Malaysia

Reem Abed Almotaleb

Abuiyada Dhofar University Palestine

Ricky Yuk-Kwan Ng Vocational Training Council, Hong Kong Hong Kong

Ronald Griffin Florida Agricultural & Mechanical University USA

Rotaru Ioan-Gheorghe Timotheus Brethren Theological Insititute of

Bucharest Romania

Ruby Ann L. Ayo Bicol University Philippines

Sadiq Abdulwahed Ahmed

Ismail United Arab Emirates University UAE

Sally dhruva' Stephenson Frosterburg State University USA

Seonjeong Ally Lee Kent State University USA

Shaik. Feroz Caledonian College of Engineering Oman

SHANG Songmin The Hong Kong Polytechnic University Hong Kong

Shujen Lee Chang Asia University Taiwan

Soon SONG Wonkwang University South Korea

Suzanne Beasterfield Idaho State University USA

Szu-Wei (Chris) Chen I-Shou University Taiwan

T.S.Devaraja University of Mysore, Hemagangothri Campus India

Tan Khay Boon SIM Global Education Singapore

Theeraphab Phetmalaikul Srinakharinwirot University Thailand

Thoedsak Chomtohsuwan Rangsit University Thailand

Vijayaletchumy Subramaniam Universitas Putra Malaysia Malaysia

Vivian Louis Forbes The University of Western Australia Australia

Wang Yu-Shan National Kaohsiung First University of Science Taiwan

11

and Technology

Warren Matthews Belhaven University USA

Wei-Cheng(Joseph) Mau Wichita State University USA

Wen-Pei Sung National Chin-Yi University of Technology Taiwan

William Richeson University of Kentucky USA

Ye PeiShi Family Justice Courts Singapore Singapore

Ying Zhang Southeast University China

Yong Won Seo Chung-Ang University Korea

Yong-Ho Kim Pukyong National University South Korea

Yuki Yokohama Kanto Gakuin University Japan

Zabihollah Rezaee The University of Memphis USA

Zhou Xiao Fudan University China

12

Special Thanks to Session Chairs

13

Conference Venue Information

Royal Plaza Hotel

193 Prince Edward Road West, Kowloon, Hong Kong

Phone: +852 2928 8822

Fax: +852 2606 0088

Location

The Royal Plaza Hotel is centrally located in Hong Kong, within easy reach of international

transport facilities. Situated in Mongkok in the heart of Kowloon, the hotel sits atop the MTR

Station and is only 45 minutes by rail from China as well as the Hong Kong International Airport.

The Hotel is directly linked to MOKO, one of the largest shopping centers in Hong Kong with

over 200 shops. The Hotel is surrounded by numerous tourist attractions and entertainment

venues that will fascinate even the most sophisticated visitors. For a unique Hong Kong

experience in a dynamic location, choose to stay at the Royal Plaza Hotel.

14

Transportation

Expect the unexpected and experience this vibrant city in a dynamic location during your stay

with Royal Plaza Hotel. Situated in the heart of Kowloon, the hotel boasts superb convenience at

its doorstep, allowing you to get around town at unparalleled ease via major transportation

means.

15

Hotel Shuttle Timeline

Due to unforeseen condition, the above schedule is subject to change without prior notice.

Please be reminded to reserve seats in advance; all seats are provided on first-come-first-serve

basis.

16

Royal Plaza Hotel

The 1st floor plan

Registration: 1 floor

Poster Session: 1 floor

Tea Break & Networking: 1 floor

Oral Session: Royal Room 1-3, 1 floor

Poster Session: Royal Room 3, 1 floor

Lunch: La Scala, 2 floor

Recep

tion

Royal Room 1+2

Royal Room 3

17

Conference Schedule

Tuesday, June 4, 2019

Oral Session

Time Schedule Venue

08:30-14:00 Registration 1F, in front of

Royal 1+2

08:45-10:15 Mechanical Engineering Royal Room1+2,

1F

10:15-10:30 Tea Break & Networking Hallway, 1F

10:30-12:00

Natural Sciences Keynote Address

Dr. Kwun Nam Hui

Topic: Defect Engineering of Metal Oxide Materials for

Energy Storage

Royal Room 1+2,

1F

12:00-13:00 Lunch Time La Scala, 2F

13:00-14:30 Environmental Science / Power & Energy

Engineering / Fundamental and Applied Sciences

Royal Room1+2,

1F

14:30-14:45 Tea Break Hallway, 1F

Wednesday, June 5, 2019

Oral Session

Time Schedule Venue

08:30-14:00 Registration 1F, in front of

Royal 1+2

08:45-10:15 Education Royal Room1+2,

1F

10:15-10:30 Tea Break & Networking Hallway, 1F

10:30-12:00 Civil Engineering/ Electrical and Electronic Engineering/

Mechanical Engineering

Royal Room 1+2,

1F

18

Wednesday, June 5, 2019

Poster Session

Time Schedule Venue

09:30~10:30

Poster Session (1)

Computer and Information Sciences / Material Science

and Engineering / Electrical and Electronic Engineering /

/ Business & Management / Biological Engineering

Royal room 3, 1F

Thursday, June 6, 2019

Oral Session

Time Schedule Venue

08:30-14:00 Registration 1F, in front of

Royal 1+2

08:45-10:15

Culture/ Law Royal Room 1+2,

1F

Business & Management / Economics Royal Room 3,

1F

10:15-10:30 Tea Break & Networking Hallway, 1F

10:30-12:00

Social Science Keynote Address (1)

Dr. Hui-Chun Chu

Topic: Applications and findings of adopting mobile

learning strategies in flipped classrooms

Social Science Keynote Address (2)

Dr. Purrie Ng Pui Yee

Topic: UIC Research Grant (Category I): The Innovation of

Creative Business Strategies on the Regeneration Stage of

Pearl River Delta regions - Case studies on Cultural and

Creative Companies in Hong Kong, Macau, Shenzhen, and

Zhuhai

Royal Room1+2,

1F

12:00-13:00 Lunch Time La Scala 2F,

1F

19

Natural Sciences Keynote Address

Royal Room 1+2, 1 floor

10:30-12:00, Tuesday, June 4, 2019

Topic:

Defect Engineering of Metal Oxide Materials for Energy

Storage

Dr. Kwun Nam Hui

Associate Professor

Institute of Applied Physics and Materials Engineering

University of Macau, Macau, China

Abstract

Transition metal oxide-based supercapacitors are one of the most efficient classes of

electrochemical storage devices because of their higher power density, faster charge–discharge

rate, and longer lifespan than those of lithium-ion batteries. Generally, transition-metal oxides

involve fast reversible Faradaic reactions at the surface or at a near-surface region, producing

high energy densities. However, the high energy density of transition-metal oxides is achieved

by sacrificing power density and cycling lifetime, impeding their large-scale practical application

in supercapacitors. In tackling these problems, several approaches have been explored. For

instance, surface modification, doping, and defect engineering of transition metal oxides have

been considered an effective strategy to accelerate and intensify reaction kinetics, realizing high

electrochemical performance. In this talk, the speaker will present his recent work in the

development and application of nanostructured metal oxide electrode for high-performance

supercapacitors. Several strategies, including the morphology control, core/shell architecture,

and defect engineering, will be discussed to improve the electron transports, electrolyte ions

diffusion kinetics, and electrical conductivity of metal oxide electrodes.

20

Social Sciences Keynote Address (1)

Royal Room 1+2, 1 floor

10:30-12:00 , Thursday, June 6, 2019

Topic: Applications and findings of adopting mobile learning strategies

in flipped classrooms

Dr. Hui-Chun Chu

Department of Computer Science and Information Management

Soochow University

Abstract

The flipped classroom has been recognized as an innovative and effective pedagogy. It inverts

the traditional instruction mode by introducing teaching content before class, and hence teachers

can use class time to help individual students solve their learning problems and improving their

learning outcomes through practicing, interactions and applications. While the effectiveness of

the flipped classroom has been identified, the challenges of applying it to school settings have

also been pointed out, such as the strategies and principles for designing effective in-class

learning activities and helping students actively learn in the before-class context.

In this speech, the challenges, as well as the definition, characteristics, and educational

objectives of flipped learning, are introduced; moreover, the mobile technologies enhanced

flipped learning model is proposed by integrating the features of mobile and wireless

communication technologies into the flipped classroom strategies to provide a guidance for

educators to develop effective flipped learning activities and plans for helping students learn

seamlessly across contexts.

21

Social Sciences Keynote Address (2)

Royal Room 1+2, 1 floor

10:30-12:00, Thursday, June 6, 2019

Topic: UIC Research Grant (Category I): The Innovation of

Creative Business Strategies on the Regeneration Stage of Pearl

River Delta regions - Case studies on Cultural and Creative

Companies in Hong Kong, Macau, Shenzhen, and Zhuhai

Dr. Purrie Ng Pui Yee

Associate Professor

Division of Culture and Creativity

BNU-HKBU United International College

Abstract

For the past two decades, cultural and creative Industries have played a more and more

significant role for restructuring the urban economy in Pearl River Delta regions (PRD).

However, in the midst of all these rapid changes, limited research has been conducted among the

Pearl River Delta regions after their business regenerated in the past few decades. In order to

put the research into focus, four regions of Pearl River Delta are chosen as our case reports.

Since 80's onwards, the PRC government has established all these 4 areas as Special Economic

Zones under the People's Republic of China (SEZs). The common characteristics of choosing

these areas, including Hong Kong[1]

, Macau, Shenzhen and Zhuhai because they are evolving

and diversifying their business models in varying degrees to tertiary industries, including cultural

or creative industries in these few decades. Through the study, we would like to explore any

similarities or differences among these areas. Regarding methodology, this is an exploratory

study involving a set of questionnaires of totally 30 questions (29 semi-structured questions with

1 open question). The first set of questionnaires were sent out to the public as an initial focus

group study. Then some key summary tables were compiled and analyzed afterwards. The

significant outcomes are twofold, firstly, it will contribute some valuable data for creative

business strategies related to Creative Industries; secondly, it will provide teaching materials for

creative services management projects practically.

Keywords: Innovation, Creative Business Strategies, Creative Supply Chain

22

[1] According to the latest statistics, Hong Kong has around 39 200 cultural and creative

industry-related establishments, with about 200 000 practitioners engaged. Cultural and

creative industries represent around 5% of the Hong Kong's Gross Domestic Product.

(Source: http://www.hketco.hk/en/culture/creative/)

23

Oral Sessions

Mechanical Engineering

Tuesday, June 4, 2019 08:45-10:15 Royal Room 1+2

Session Chair: Prof. Kwun Nam Hui

ISCEAS-0182

Multi-Dimensional Evaluation Analysis of Machine Tool Double-Eco Lubrication

Technology for Environmental Conservation

Paulo Da Silva︱Nagaoka University of Technology

Ikuo Tanabe︱Nagaoka University of Technology

ISCEAS-0207

Effects of Asymmetric D-Shaped Inlet Nozzle on Squirrel-Cage Fan Aerodynamic

Performance

Boyan Jiang︱Huazhong University of Science and Technology

Jun Wang︱Huazhong University of Science and Technology

Hui Liu︱Huazhong University of Science and Technology

Yougen Huang︱Ningbo Fotile Kitchen Ware Cor., Ltd.

Weigang Yang︱Ningbo Fotile Kitchen Ware Cor., Ltd.

Bin Li︱Ningbo Fotile Kitchen Ware Cor., Ltd.

ISCEAS-0208

Energy-Saving and Noise Investigation on Bionic Concaved Trailing Edge in an

Open-Type Axial Flow Fan

Xiaopei Yang︱Huazhong University of Science and Technology

Jun Wang︱Huazhong University of Science and Technology

Boyan Jiang︱Huazhong University of Science and Technology

Zhong Liang︱Huazhong University of Science and Technology

24

ISCEAS-0185

Development and Application of Ultra-Large Injection Mold with Complex Conformal

Cooling Channels

Chil-Chyuan Kuo︱Ming Chi University of Technology

Yi-Jun Zhu︱Ming Chi University of Technology

Ying-Zhi Wu︱Ming Chi University of Technology

Shi-Xun Lin︱Ming Chi University of Technology

Zheng-Yan You︱Ming Chi University of Technology

25

Environmental Science/ Power & Energy Engineering/

Fundamental and Applied Sciences

Tuesday, June 4, 2019 13:00-14:30 Royal Room 1+2

Session Chair: Prof. Utpal Dutta

ISCEAS-0183

Analysis of 2016 Transit Millage Outcome in Southeast Michigan

Rasha Majzoub︱University of Detroit Mercy

Utpal Dutta︱University of Detroit Mercy

Xiaohui Zhong︱University of Detroit Mercy

ISCEAS-0194

Cloud Base Height Determination by Meteorological Model Simulation over Chiang Mai

during Winter 2016-2017

Piyaon Sapphaphab︱Srinakharinwirot University

Siriluk Ruangrungrote︱Srinakharinwirot University

ISCEAS-0206

Application of Viscous Inverse Design Method in Axial Flow Fan

Hui Liu︱Huazhong University of Science and Technology

Boyan Jiang︱Huazhong University of Science and Technology

Xiaopei Yang︱Huazhong University of Science and Technology

Jun Wang︱Huazhong University of Science and Technology

ISCEAS-0196

Coalescence of Droplets with Suspended Particles in Creeping Flow Bounded by a

Cylindrical Confinement

Masahiro Muraoka︱Tokyo University of Science

Haruhito Sakurai︱Tokyo University of Science

26

Education

Wednesday, June 5, 2019 08:45-10:15 Royal Room 1+2

Session Chair: Michelle Trudgett

ISESS-0098

Attracting First Nation People to Undertake Higher Degree Research Degrees in Australia

Michelle Trudgett︱University of Technology Sydney

ISESS-0096

Building a Better Block Program: Addressing the Needs of the 21st Century First Nations

Student

Corrinne Sullivan︱Western Sydney University

ISESS-0097

Valuing Students’ Voices: Developing Critical Thinking, Leadership and Citizenship

through Practice in Education

Sally Varnham︱University of Technology Sydney

ISESS-0106

A Design Thinking Approach to Co-Creating Structured Work-Based Learning

Programme in the Workplace

Timothy Chan︱Singapore Institute of Management

ISESS-0108

Investigating the impact of peer feedback as a pedagogical intervention in dance rehearsal

class

How Wah Susan Yeung︱LASALLE College of the Arts

27

Civil Engineering/ Electrical and Electronic Engineering/

Mechanical Engineering

Wednesday, June 5, 2019 10:30-12:00 Royal Room 1+2

Session Chair: Prof. Cesario Jr Bacosa

ISCEAS-0197

Determination of Air Temperature Using Remote Sensing: A Case Study in Mactan, Cebu,

Philippines

Estrella C. Macabutas︱School of Engineering, Cebu City

Alejandro F. Tongco︱School of Engineering, Cebu City

ISCEAS-0210

Effect of Bolt Arrangement on Slip Behavior of Thermal Sprayed Coating Joint

Cheng-chih Chen︱National Chiao Tung University

ISCEAS-0191

Axial Compressive Strengths of Concrete Column Reinforced with Naturally Treated

Bamboo sticks as Replacements for Steel bars.

Cesario Jr Bacosa︱Western Philippines University

Marnie Giduquio︱University of San Carlos

Michael Loretero︱University of San Carlos

ISCEAS-0188

Geopolymerization Method to Modify the Structural Properties of Stabilized Silty Clay

Utilizing Coconut Husk Ash, Rice Husk Ash And Sea Water for Wall Construction

John Bryan Villapa︱Western Philippines University

ISCEAS-0209

Network Modeling for Distribution System on Feeder Losses Using Artificial Neural

Network

Alfred Rey Vasquez︱Mapua University

Federico Cudia︱Mapua University

Gorgonio II Vallestero︱Mapua University

28

Culture/ Law

Thursday, June 6, 2019 08:45-10:15 Royal Room 1+2

Session Chair: Prof. Ji Lian Yap

ISESS-0104

Balancing Competing Policy Goals in Sale of Goods Law

Ji Lian Yap︱Singapore University of Social Sciences

ISESS-0099

Restoration of Takayama in Gion Matsuri

Katsuhide Sato︱Konan Women’s University

29

Business & Management/ Economics

Thursday, June 6, 2019 08:45-10:15 Royal Room 3

Session Chair: Prof. Chai-Lee Goi

BREFM-0055

The Wave of Industry Revolution 4.0 is Coming: Are We Ready for the New Trend in

Marketing

Chai-Lee Goi︱Curtin University

BREFM-0057

Consumers’ Perceptions of Social Media Brand Community Engagement

Amy Ooi Mei Wong︱Singapore University of Social Sciences

Carmen Kar Hang Lee︱Singapore University of Social Sciences

BREFM-0059

A Financial Methodology to Participants Selection in Public Contracting Processes in

Colombia.

Laura Vanegas Rendón︱Universidad de los Andes

Julio Villarreal Navarro︱Universidad de los Andes

30

Poster Sessions (1)

Computer and Information Sciences

Wednesday, June 5, 2019 09:30-10:30 Royal Room 3

ISCEAS-0195

Design and Testing of a 25 Gb/s NRZ and 50 Gb/s PAM-4 Optical Receiver Module for 400

Gb/s Short-Reach Applications

Kuan-Ting Lin︱National Kaohsiung University of Science and Technology

Yu-Cheng Lin︱National Kaohsiung University of Science and Technology

Tien-Tsorng Shih︱National Kaohsiung University of Science and Technology

Jau-Ji Jou︱National Kaohsiung University of Science and Technology

Po-Jui Chiang︱National Kaohsiung University of Science and Technology

Yaw-Dong Wu︱National Kaohsiung University of Science and Technology

ISCEAS-0201

A Method to Defend against Activity Hijacking Attack by Using Shared-Memory Side

Channel

Zhehui Liao︱National Tsing Hua University

Hung-Min Sun︱National Tsing Hua University

31

Material Science and Engineering

Wednesday, June 5, 2019 09:30-10:30 Royal Room 3

ISCEAS-0190

Enhanced Magnetic Properties of Multiferroic (1-x)GaFeO3-(x)CoFe2O4 Nanocomposites

Yu-Hsin Wang︱National University of Kaohsiung

Tai-Chun Han︱National University of Kaohsiung

ISCEAS-0199

The Influence of Structure on Nonlinear Optical Properties in YMnO3 and YbMnO3

Tzu Fang Hsu︱National Pintung University

Tai Chun Han︱National Kaohsiung University

Meng Xiu Xie︱National Pintung University

Jin An Lee︱National Pintung University

ISCEAS-0189

Effects of Ytterbium Substitution on Dielectric Properties in Multiferroic Tb1-xYbxMnO3

Ceramics

Tai-Chun Han︱National University of Kaohsiung

Bo-Hong Chen︱National University of Kaohsiung

ISCEAS-0202

Pilocarpine-Loaded Polycaprolactone Nanocarriers for Glaucoma Treatment

Jui-Yang Lai︱Chang Gung University

32

Electrical and Electronic Engineering

Wednesday, June 5, 2019 09:30-10:30 Royal Room 3

ISCEAS-0200

Design of a 25-Gb/s PAM-4 Transimpedance Amplifier with High Linearity in 90-nm

CMOS Technology

Ting-Chia Lu︱National Kaohsiung University of Science and Technology

Chih-Chen Peng︱National Kaohsiung University of Science and Technology

Jau-Ji Jou︱National Kaohsiung University of Science and Technology

Bing-Hong Liu︱National Kaohsiung University of Science and Technology

Shao-I Chu︱National Kaohsiung University of Science and Technology

Chien-Liang Chiu︱National Kaohsiung University of Science and Technology

ISCEAS-0186

Study of a DC-DC Flyback Converter with High Step-Down Voltage Conversion

Lung-Sheng Yang︱Far East University

Chih-Kun Cheng︱Far East University

Chia Ching Lin︱Far East University

33

Business & Management

Wednesday, June 5, 2019 09:30-10:30 Royal Room 3

BREFM-0060

IT Investment Decision Making: Case Studies on the Implementation of Contactless

Payments in Commercial Banks of Kazakhstan

Symbat Moldabekova︱University of Edinburgh Business School

34

Biological Engineering

Wednesday, June 5, 2019 09:30-10:30 Royal Room 3

ISCEAS-0192

The Effect of Helminthostachys Zeylanica Extract on High Fat Diet-Fed Mice

Ting-Chen Chang︱Taipei Medical University

Yu-Chih Liang︱Taipei Medical University

Cheng Huang︱National Yang Ming University