conference program bangkok... · mechanical engineering and technology (1) ..... 21 education (1) /...

Conference Program

March 19-21, 2019 Bangkok, Thailand

APICENS Asia-Pacific Conference on Engineering and Natural Sciences

APCESP Asia-Pacific Conference on Education, Social Studies and Psychology

APICENS

Asia-Pacific Conference on Engineering and Natural Sciences

ISBN 978-986-89298-2-1

APCESP

Asia-Pacific Conference on Education, Social Studies and Psychology

ISBN 978-986-5654-08-5

Content

Welcome Message ............................................................................................................................... 2

General Information for Participants .......................................................................................... 3

International Committees of Natural Sciences ......................................................................... 5

International Committees of Social Sciences............................................................................. 8

Conference Venue Information ................................................................................................... 11

Conference Schedule ....................................................................................................................... 13

Natural Sciences Keynote Address (1) ...................................................................................... 15

Natural Sciences Keynote Address (2) ...................................................................................... 17

Social Sciences Keynote Address (1) ......................................................................................... 18

Social Sciences Keynote Address (2) ......................................................................................... 19

Oral Sessions ...................................................................................................................................... 21

Mechanical Engineering and Technology (1) ................................................................ 21

Education (1) / Psychology .................................................................................................. 23

Materials Science and Engineering (1) / Electrical and Electronic Engineering24

Business & Management /Education (2) ......................................................................... 26

Chemistry / Environmental Engineering/ Computer Engineering and

Technology (1)/ Materials Science and Engineering (1) ........................................... 27

Information Engineering and Technology/ Computer Engineering and

Technology(2)/ Mechanical Engineering and Technology(1) ................................. 29

Computer Engineering and Technology (3) / Materials Science and

Engineering (2) / Mechanical Engineering and Technology (2) ............................. 31

Education (3)/Social Studies(1) ......................................................................................... 33

Social Studies (2)/ Education (4) ....................................................................................... 34

Poster Session .................................................................................................................................... 35

Biology / Materials Science and Engineering / Electrical and Electronic

Engineering / Civil Engineering / Physics / Psychology / Education .................... 35

2

Welcome Message

Local Host

Dr. Mayura Soonwera

Faculty of Agricultural Technology

King Mongkut’s Institute of Technology Ladkrabang

Ladies and Gentlemen,

Welcome to the joint conference of Asia-Pacific Conference on Engineering and Natural

Sciences(APICENS) and Asia-Pacific Conference on Education, Social Studies and Psychology

(APCESP) 2019 and welcome to Bangkok, Thailand.

This conference has two important topics of Engineering and Natural Sciences. All topic is a very

high calling, and I hope this conference provides you the opportunity to visit with friends, make new

colleagues and share your experience in researching. May you find encouragement as you listen to

speakers, participate in sessions, and interact with other researchers from other countries.

If you have the opportunity, I hope you will take the time to enjoy many beautiful places in Bangkok.

Bangkok is the populous city of Thailand and world’s best city for four consecutive years by Travel&

Leisure Magazine, this city is as well known in Thai as “ Krung Thep Maha Nakhon” and the 5 best

places to do in Bangkok :

1. Grand Palace and Wat Prakeaw, these palace built in 1782 and Wat Prakeaw enshrine the Emerald

Buddha and Emerald Buddha as well known in Thai as “ Phra Kaew Morakot”.

2. Wat Arun or The temple of dawn, these temple is one of the most beautiful and recognized in

Southeast Asia.

3. Chinatown at Yaowarat Road.

4. Wat Pho, the gigantic reclining Buddha and traditional Thai massage.

5. Chatuchak weekend market.

Welcome to the conference and I send my very best wishes to you all. I hope to see you again at the

next conference.

Thank You,

Dr. Mayura Soonwera

3

General Information for Participants

Registration

The registration desk will be situated on the 9F at the Centara Watergate Pavillion Hotel Bangkok

during the following time:

09:00-11:00 Tuesday, March 19, 2019

08:45-15:00 Wednesday, March 20, 2019

08:45-11:00 Thursday, March 21, 2019

A Polite Request to All Participants

Participants are requested to arrive in a timely fashion for all addresses. Presenters are reminded that the time slots

should be divided fairly and equally by the number of presentations, and that they should not overrun. The session

chair is asked to assume this timekeeping role and to summarize key issues in each topic.

Certificate

Certificate of Presentation or Certificate of Attendance

A certificate of attendance includes participant’s name and affiliation, certifying the participation in the conference.

A certificate of presentation indicates a presenter’s name, affiliation and the paper title that is presented in the

scheduled session.

Certificate Distribution

Oral presenters will receive a certificate of presentation from the session chair after their presentations or at the end

of the session. Poster presenters will receive a certificate of presentation from the conference staff at the end of their

poster session.

The certificate of presentation will not be issued, either at or after the conference, to authors whose papers are

registered but not presented. Instead, the certificate of attendance will be provided after the conference.

4

Preparation for Oral Presentations

All presentation rooms are equipped with a screen, an LCD projector, and a laptop computer installed with

Microsoft PowerPoint. You will be able to insert your USB flash drive into the computer and double check your file

in PowerPoint. We recommend you to bring two copies of the file in case that one fails. You may also connect your

own laptop to the provided projector; however please ensure you have the requisite connector.

Preparation for Poster Presentation

Materials Provided by the Conference Organizer:

1. X-frame display & base fabric canvases (60cm×160cm)

2. Adhesive tapes or binder clips

Materials Prepared by the Presenters:

3. Home-made poster(s)

4. Material: not limited, can be posted on the canvases

5. Recommended poster size: 60cm*160cm

A 60cm*160cm poster illustrates the

research findings.

1. Wider than 60cm (left)

2. Copy of PowerPoint slides in A4 papers (right)

5

International Committees of Natural Sciences

Abhishek Shukla R.D. Engineering College Technical Campus India

Ahmad Salihin Bin Samsudin Universiti Malaysia Pahang Malaysia

Ahmad Zahedi James Cook University Australia

Akshaya Kumar Rout KIIT University India

Alexander M. Korsunsky Trinity College, Oxford UK

Almacen Philippine Association of Maritime Training Centers Philippines

Amel L. Magallanes Capiz State University Philippines

Amimul Ahsan Universiti Putra Malaysia Malaysia

Amran Bin Ahmed University Malaysia Perlis Malaysia

Anthony D. Johnson Seoul National University of Science & Technology UK

Ashley Love A.T. Still University USA

Asif Mahmood King Saud University, Riyadh Saudi Arabia

Asmida Ismail University Technology Mara Malaysia

Baolin Wang University of Western Sydney

Chang Ping-Chuan Kun Shan University Taiwan

Chee Fah Wong Universiti Pendidikan Sultan Idris Malaysia

Chee-Ming Chan Universiti Tun Hussein Onn Malaysia Malaysia

Cheng-I Chen National Central University Taiwan

Cheng-Min Feng National Chiao Tung University Taiwan

Cheuk-Ming Mak The Hong Kong Polytechnic University Hong Kong

Chia-Ray Lin Academia Sinica Taiwan

Chih-Wei Chiu National Taiwan University of Science and Technology Taiwan

Chi-Ming Lai National Cheng-Kung University Taiwan

Ching-An Peng University of Idaho USA

Chin-Tung Cheng National Kaohsiung University of Science and Technology Taiwan

Christoph Lindenberger Friedrich-Alexander University Germany

Daniel W. M. Chan The Hong Kong Polytechnic University Hong Kong

Din Yuen Chan National Chiayi University Taiwan

Don Liu Louisiana University USA

Edward J. Smaglik Northen Arizona University USA

Farhad Memarzadeh National Institutes of Health USA

Fatchiyah M.Kes. Universitas Brawijaya Indonesia

Gwo-Jiun Horng Southern Taiwan University of Science and Technology Taiwan

Hairul Azman Roslan Universiti Malaysia Sarawak

Hamed M El-Shora Mansoura University Egypt

Hanmin Jung Convergence Technology Research Planning South Korea

6

Hasmawi Bin Khalid University Teknologi Mara Malaysia

Hedayat Omidvar National Iranian Gas Company (NIGC) Iran

Hikyoo Koh Lamar University USA

Hiroshi Uechi Osaka Gakuin University Japan

Hsien Hua Lee National Sun Yat-Sen University Taiwan

Hung-Yuan Chung National Central University Taiwan

Hyoungseop Kim Kyushu Insititute of Techonogy Japan

Ivica Veza University of Split Croatia

Jeril Kuriakose Manipal University India

Jieh-Shian Young National Changhua University of Education Taiwan

Jivika Govil Zion Bancorporation India

Kazuaki Maeda Chubu Univeristy Japan

TaeSoo Kim Hanbat National University South Korea

Kuang-Hui Peng National Taipei University of Technology Taiwan

Kun-Li Wen Chienkuo Technology University Taiwan

Lai Mun Kou SEGi University Malaysia

M. Chandra Sekhar National Institute of Technology India

Mahadev Sakri College of Engineering and Technology India

Michael Pillay Vaal University of Technology South Africa

Michiko Miyamoto Akita Prefectural University Japan

Milan Dordevic College of Engineering and Technology Kuwait

Norizzah Abd Rashid Universiti Teknologi MARA Malaysia

Onder Turan Anadolu University Turkey

Osman Adiguzel Firat University Turkey

P. Sivaprakash A.S.L. Pauls College of Engineering & Technology India

P.Sanjeevikumar University of Bologna India

Panayotis S. Tremante M. Universidad Central de Venezuela Venezuela

Patrick S.K. Chua Singapore Institute of Technology Singapore

Pei-Jeng Kuo National Chengchi University Taiwan

Phongsak Phakamach North Eastern University Thailand

Rainer Buchholz Friedrich-Alexander University Germany

Rajeev Kaula Missouri State University USA

Ransinchung R.N. Indian Institute of Technology India

Roslan Zainal Abidin Infrastructure University Kuala Lumpur Malaysia

S. Ahmed John Jamal Mohamed College India

Saji Baby Kuwait University Kuwait

Seok Kim Pusan National University South Korea

Seong Min Kim Chonbuk National University South Korea

7

Sergei Gorlatch University of Muenster Germany

Shen-Long Tsai National Taiwan University of Science and Technology Taiwan

Sittisak Uparivong Khon Kaen University Thailand

Sudhir C.V. Caledonian College of Engineering Oman

Suresh. B. Gholse. Rtm Nagpur University India

Tan Lit Ken Universiti Teknologi Malaysia Malaysia

Teerapot Wessapan Eastern Asia University Thailand

The Nan Chang Tatung University Taiwan

Thippayarat Chahomchuen Kasetsart University Thailand

Vivian Louis Forbes Wuhan University China

Wei Gao IXIA Inc. USA

Wen-Hua Tarng National Tsing Hua University Taiwan

William L. Baker Indiana State University USA

Wong Hai Ming The University of Hong Kong Hong Kong

Wong Tsun Tat The Hong Kong Polytechnic University Hong Kong

Yasuhiko Koike Tokyo University of Agriculture Japan

Yee-Wen Yen National Taiwan University of Science and Technology Taiwan

Yung-Chih Kuo Natinoal Chung Cheng University Taiwan

mailto:[email protected]


8

International Committees of Social Sciences

Adeeb Jarrah United Arab Emirates University UAE

Ahrar Husain Jamia Millia Islamia Indian

Alex Yao Tang National Cheng Kung University Taiwan

Amol Gore

Thailand

Ashish Pareek Maharshi Dayanand Saraswati University, Ajmer India

Atefeh Ferdosipour Azad University Iran

Azidah Abu Ziden Universiti Sains Malaysia Malaysia

Azilawati Nanyang Technological University Singapore

Aziz Bin Ahmad University Malaysia Terengganu Malaysia

B. Suresh Lal Kakatiya University India

Badar Alam Iqbal Aligarh Muslim University India

Bayram Akarsu Erciyes University Turkey

Bor-Tyng Wang Feng Chia University Taiwan

Brian Hunt Mahidol University Thailand

Cathine G. Scott Morris College in Sumter USA

Chen-Yi Lin National Taichung University of Science and Technology Taiwan

Chia-Hwan Chen National Taipei University of Education Taiwan

Chia-Ming Chang National Chia-Yi University Taiwan

Chib Datta Meghe Institute of Management Studies India

Chih-Wei Peng Taipei Medical University and Hospital Taiwan

Ching-Yi Tien I-Shou University Taiwan

Chi-Ying Chen Asia University Taiwan

Concepcion C. Libuit City University of Pasay Philippines

Darshan kaur Narang University of Rajasthan, Jaipur India

David Yoon Universitaire Léonard de Vinci France

Dharam Vir Mahajan CCS university, Meerut India

Donald L. Amoroso Auburn University at Montgomery USA

Donghun Lee Sungkyunkwan University South Korea

Eddy K.W. Li The Chinese University of Hong Kong Hong Kong

Edward Hwang Chung Hua University Taiwan

Eric Santos Parilla University of Asia and the Pacific Philippines

Frank S.C. Tseng National Kaohsiung First University of Science and Technology Taiwan

Funda Varnaci Uzun Aksaray University Turkey

Gajendra Singh Satyawati College, University of Delhi India

Hamzeh Dodeen United Arab Emirates University UAE

Intan Soliha Binti Ibrahim Universiti Malaysia Sabah Malaysia

9

Irene Guatno Toribio Philippine Christian University Philippines

Jalil Safaei University of Northern British Columbia Canada

Jamie Halsall University of Huddersfield UK

Jeffrey Trambley Musashino Gakuin University Japan

Jian-Horng Chen Chung Shan Medical University Taiwan

John Christian S. Jardin Palawan State University Philippines

John Erinorio Perez University of the Philippines Los Baños Philippines

Jonas Chao-Pen Yu Takming University of Science and Technology Taiwan

Joseph Lau The University of Hong Kong Hong Kong

Joyce Zhou Emporia State University USA

Junaid M. Shaikh Curtin University Sarawak Malaysia Malaysia

Kaedsiri Jaroenwisan Silpakorn Univesity Thailand

Kanokphon Chantanarungpak Srinakharinwirot University Thailand

Karen Miranda Fernandez Imus Institute Philippines

Karendra Devroop University of South Africa South Africa

Kyung Hee Kim Mokpo National University South Korea

Kim Sangho Ritsumeikan Asia Pacific University Japan

Deok Man Kim Baekseok University South Korea

Krishna Govender AAA School of Advertising South Africa

Hsiao-Tseng Lin Meiho University Taiwan

Linda Oshita University of Hwaii USA

Margaret Sanapo Ritsumeikan University Japan

Maria Cristina M. De los Santos Kyungdong University-Global Campus South Korea

Marie Paz E. Morales Philippine Normal University Philippines

Mehryar Nooriafshar University of Southern Queensland Australia

Michael Kao Chang Gung University Taiwan

Micheal Kon Aletheia University Taiwan

Michelle M. Mukherjee Queensland University of Technology Australia

Mindy Suzanne Andino Bloomsburg University USA

Ming-Chang Chih National Chung Hsing University Taiwan

Mingchu Luo Emporia State University USA

Mohamad Hafis Amat Simin University Sultan Zainal Abdin Malaysia

Mohamed Ahmed El Khouli Sadat Academy for Management Science Egypt

Mohamed Hammad Hendy Beni-Suef University Egypt

N. S. Ravishankar Axis Bank India

Nadir Memmedli

Azerbaijan

Naim Uzun Aksaray University Turkey

10

Nezaket Memmedli Azerbaijan National Academy of Sciences Azerbaijan

Ng Woon Lam Nanyang Technological University Singapore

Nukshi Esther Imsong Institution of Psychology Counselling and Educational Research India

Obydullah Al Marjuk Independent University, Bangladesh Bangladesh

Ozgul Keles Aksaray University Turkey

Prasong Tanpichai Kasetsart University Thailand

Ramayah Thurasamy Universiti Sains Malaysia Malaysia

Reem Abed Almotaleb Abuiyada Dhofar University Palestine

Ricky Ng Vocational Training Council Hong Kong

Ronald Griffin Florida Agricultural & Mechanical University USA

Rotaru Ioan-Gheorghe Timotheus Brethren Theological Insititute of Bucharest Romania

Ruby Ann L. Ayo Bicol University Philippines

Sadiq Abdulwahed Ahmed Ismail United Arab Emirates University UAE

Sally dhruva' Stephenson Frosterburg State University USA

Shaik. Feroz Caledonian College of Engineering Oman

Shiv Prasad Maharshi Dayanand Saraswati University India

Shujen Lee Asia University Taiwan

Shun-Hsing Chen Oriental Institute of Technology Taiwan

Soon SONG Wonkwang University South Korea

Stacey Jocoy Texas Tech University USA

Sunil Kumar Alliance University India

T.S.Devaraja University of Mysore, Hemagangothri Campus India

Tan Khay Boon SIM Global Education Singapore

Theeraphab Phetmalaikul Srinakharinwirot University Thailand

Vijayaletchumy Subramaniam Universitas Putra Malaysia Malaysia

Wang Yu-Shan National Kaohsiung First University of Science and Technology Taiwan

Wei-Cheng Mau Wichita State University USA

Yong-Ho Kim Pukyong National University South Korea

Yong-Taek Rhim Namseoul University South Korea


11

Conference Venue Information

Centara Watergate Pavillion Hotel Bangkok

Address: 567 Ratchaprarop Road, Makkasan, Ratchathewi, Bangkok 10400, Thailand

TEL: +66 (0) 2625 1234

The 9yh

Floor Plan

Registration: Pre-Function Area, 9F

Oral Session: Pavillion 1 and 2, 9F

Poster Session: Pre-Function Area, 9F

Tea Break & Networking: Pre-Function Area, 9F

Lunch: Café 9, 9F

12

Transportation

From Suvarnabhumi Airport

A. Taxi

It takes approximately 40-50 minutes to Centara Watergate Pavillion Hotel Bangkok and costs average

400-500 THB (15 USD).

B. MRT

1. Take SRTET City Line from Suvarnabhumi station to Ratchaprarop station. ( 25minutes, 6 stops)

2. After exit, walk towards Thanon Nikhom Makkasan Road and turn right to Ratchaprarop Road.

3. Centara Watergate Pavillion Hotel Bangkok will be on the left.

(5 mins walk after exit)

From Don Mueang Airport

A. Taxi

It takes approximately 40-50 minutes to Centara Watergate Pavillion Hotel Bangkok and costs average

400-500 THB (15 USD)

B. Airport Express Bus

1. Take the bus at exit number 12 at Terminal 2; exit 6 at Terminal 1by following the sign ''Shuttle Bus''.

2. Take Bus A3 to Pratunam station. (55 minutes)

3. Walk on Phetchaburi Rd.

4. Turn left onto Ratchaprarop Rd.

5. Turn right after 3 blocks. Centara Watergate Pavillion Hotel Bangkok will be on the left.

(5 mins walk from the bus stop)

13

Conference Schedule

Tuesday, March 19, 2019

Time Schedule Venue

09:00-11:00 Pre-Registration Pre-Function Area, 9F

09:00-09:20 Gathering for Socializing Event (optional) Pre-Function Area, 9F

09:30-18:00 Socializing Event (optional)

Wednesday, March 20, 2019

Oral Session

Time Schedule Venue

08:45-15:00 Registration Pre-Function Area, 9F

09:00-10:30 Mechanical Engineering and Technology (1) Pavillion 1, 9F

Education (1) / Psychology Pavillion 2, 9F

10:30-10:45 Tea Break & Networking Pre-Function Area, 9F

10:45-12:15

Natural Sciences Keynote Address

[1] Dr. Farhad Memarzadeh

Topic: Infection Prevention & Control in Health Care

Facilities

[2] Prof. Anthony Johnson

Topic: Cardboard Over-Packaging of Domestic Products:

The Addition to the Trash Mountain and Possible

Solutions for its Reduction

Pavillion 1, 9F

Social Sciences Keynote Address

[1] Dr. Keith H. Sakuda

Topic: Transitioning from an Entrepreneurial Idea to

Community-Engaged Scholarship: The Development of

Coordinated Distributed Agriculture

[2] Dr. Yoshiro Miyata and Ms. Nalin

Tutiyaphuengprasert

Topic: Reviving the Construction Mindset in Our Genes

Pavillion 2, 9F

12:15-13:15 Lunch Time Café 9, 9F

14


Oral Session

Time Schedule Venue

13:15-14:45

Materials Science and Engineering (1) / Electrical and

Electronic Engineering Pavillion 1, 9F

Business & Management /Education (2) Pavillion 2, 9F


15:00-16:45

Chemistry / Environmental Engineering/ Computer

Engineering and Technology(1)/ Materials Science and

Engineering(1)

Pavillion 1, 9F

Information Engineering and Technology/ Computer

Engineering and Technology(2)/ Mechanical

Engineering and Technology(1)

Pavillion 2, 9F

Thursday, March 21, 2019

Oral Session

Time Schedule Venue

08:45-11:00 Registration Pre-Function Area, 9F

09:00-10:30

Computer Engineering and Technology(3) /

Materials Science and Engineering (2) /

Mechanical Engineering and Technology (2)

Pavillion 1, 9F


10:45- 12:15 Education(3) / Social Studies(1) Pavillion 1, 9F

12:15-13:15 Lunch Time Café 9, 9F

13:15-14:45 Social Studies (2) / Education(4) Pavillion 1, 9F


Poster Session

Time Schedule Venue

09:30-10:30

Poster Session

Biology / Materials Science and Engineering / Electrical

and Electronic Engineering / Civil Engineering / Physics /

Psychology / Education

Pre-Function Area,

9F

15

Natural Sciences Keynote Address (1)

Pavillion 1, 9F

10:45-12:15, Wednesday, March 20, 2019

Topic:

Infection Prevention & Control in Health Care Facilities

Dr. Farhad Memarzadeh

Director, Division of Technical Resources

National Institutes of Health

Abstract

The importance and urgency for a conference such as this one cannot be underestimated. Our world is

experiencing dramatic climate change, geological upheavals, and newly emerging diseases that are

difficult to control or treat. Climate change may allow new microorganisms to flourish. Geological

upheavals may result in unsanitary conditions that become breeding grounds for disease dissemination. In

addition, we are an increasingly mobile world and disease spreads across borders and continents relatively

easily. We need an international army of experts from all walks of science, bioenvironmental and

bioengineering and technology to attack the numerous biological consequences of natural events in order

to improve quality of life and insure the future of mankind. Although, as yet we are not able to control

acts of nature, our challenge is to revolutionize approaches to handle the consequences of natural and

manmade disasters in ways that benefit the global population. Our task is to find innovative ways to

profile, quantify and track diseases, apply technologies to contain and minimize disease dissemination

and optimize our ability to respond to crisis’ and disasters in meaningful ways that alleviate pain and

suffering. Additionally, it would be advantageous if these approaches were economical, efficient, and

easily implemented.

Indoor air quality (IAQ) is one of the most important environmental health problems. Unhealthy IAQ is

caused by poor or inadequate ventilation and exposure to one or more contaminant sources in a building.

Because of the population they serve, health care facilities pose a unique set of conditions related to

indoor air quality that require particular attention from those responsible for infection prevention efforts,

both clinical and engineering.

A significant portion of the occupants in a health care facility are patients who have preexisting health

problems and are more likely than the general population to have depressed immune systems. This fact

increases the susceptibility of these patients to building ‐related illness and exposure to airborne

microorganisms. Complicating a patient’s vulnerability is direct and indirect exposure to communicable

disease agents, which can result if visitors, family, and health care personnel do not take proper

16

precautions such as hand or respiratory hygiene when in contact with the susceptible patient. People with

potentially infectious illness in a facility who talk, sneeze, cough, or touch surfaces with contaminated

hands may be a source of these disease agents, especially if they are in direct contact with patients or

produce short-range aerosols within 6 feet of a susceptible patient or coworker.

Over the next three days, this intersection of knowledge, this meeting of the minds, this international

collaborative and multidisciplinary approach will be our early attempt at attacking these problems. We

must have a vision for the future and we must be diligent, cooperative, and resolute in achieving our goals.

We will succeed in this effort through shared knowledge, dialogue, and cooperation here and at future

conferences like it.

17

Natural Sciences Keynote Address (2)

Pavillion 1, 9F

10:45-12:15, Wednesday, March 20, 2019

Topic:

Cardboard Over-Packaging of Domestic Products: The Addition to the Trash

Mountain and Possible Solutions for its Reduction

Dr. Anthony Johnson

Professor

Seoul National University of Science and Technology

Abstract

An increasing global population demands more and more products which usually require some form of

packaging, but many of the products can be considered to be “over-packaged”. Packaging is really an

extra product which is often used once and discarded into an ever-increasing trash mountain. Materials

must be sourced, transported and manufactured into the packaging product. This is then used to wrap the

primary product, only to be discarded when the consumer arrives home with his new purchase.

The materials used in packaging vary from glass and steel to paper, cardboard and plastics which

complicate the process of environmentally sensitive disposal. What happens to the discarded packaging?

How much packaging is created? Is there legislation in place and who is responsible?

This paper investigates domestic packaging, defining the types and materials and focusing on cardboard.

The investigation continues into current disposal techniques, legislation and suggests opportunities to

reduce the packaging volume.

Key Words: Packaging, Over packaging, cardboard, Trash, Waste

18

Social Sciences Keynote Address (1)

Pavillion 2 , 9F

10:45-12:15, Wednesday, March 20, 2019

Topic:

Transitioning from an Entrepreneurial Idea to Community-Engaged

Scholarship: The Development of Coordinated Distributed Agriculture

Dr. Keith H. Sakuda

Associate Professor

University of Hawaii – West Oahu

Abstract

Universities are often tasked with discovering and transmitting knowledge to future generations for the

purpose of improving the quality of life, but academic research often disconnects faculty from that goal.

Peer-reviewed publications are the primary means of faculty evaluation and promotion, but for those

outside of academia, “quality of life” does not exist in journals or monographs.

This presentation will introduce the emerging field of community-engaged research, a movement to

connect researchers with local partners to discover and transmit knowledge for the direct purpose of

improving the quality of life for a community. By incorporating community stakeholders throughout the

research process, community-engaged research offers a new means to fulfill the academic goal of a better

world.

After briefly introducing community-engaged research the presenter will share his experiences working to

promote food sovereignty in the Pacific Islands through a new agricultural business model called

coordinated distributed agriculture. In addition to discussing the five principles of coordinated distributed

agriculture, a discussion of his experiences working with community partners will be used as a case study

for the benefits and challenges of engaged research.

19

Social Sciences Keynote Address (2)

Pavillion 2, 9F

10:45-12:15, Wednesday, March 20, 2019

Dr. Yoshiro Miyata Ms. Nalin Tutiyaphuengprasert

Professor Vice Provost and Head of Research and Development Department

Chukyo University Darunsikkhalai School for Innovative Learning of King Mongkut's

University of Technology Thonburi

Topic:

Reviving the Construction Mindset in Our Genes

Abstract

The history of mankind can be seen as the history of learning. The history of human learning is closely

related to the history of tools because much of our learning is learning to create and use physical and

non-physical tools. If we examine the history of tools, we can understand some important aspects of

learning and education. Archaeology tells us that Homo habilis was the oldest known human species who

constructed and used tools more than 2 million years ago. Later, Homo sapiens began constructing

non-physical tools such as languages, stories, rules, etc, to facilitate construction of groups of humans

with common goals. Evolutionary Psychology also tells us that these kinds of construction started when

evolution shaped what we call the construction mindset in the genes of our ancestors.

According to the Urge Theory (Toda, 1981) this mindset includes emotions like curiosity and challenge

which were essential for learning to construct and use tools, and help and contribution which were useful

in constructing societies. However, the construction of new tools driven by these emotions changed the

very environments in which they had evolved to function. The invention of farming around 10,000 years

ago forced the humans to shift from nomadic to settled lives allowing the construction mindset to

construct ever larger tools, houses, and ever more sophisticated social structures like cities and countries.

Education was invented to help learning of these new tools and structures. Then only about a few hundred

years ago, less than 0.1% of the human history, they invented machines that used fossil energies which led

to the industrial revolution, changing our environments drastically and fundamentally. When our

environments change so rapidly, there is no time for our genes to adapt to them, and the mindset no longer

20

functions properly in our modern environments. When using the complicated modern tools it is difficult

to feel curious about their mechanisms or feels challenged to construct them. Social mindset like help or

contribute are difficult to function in modern environments because the natural and human resources that

support our daily lives have become mostly invisible (Illich, 1973).

The history of tools has been so ironical: the construction mindset has constructed environments in which

it cannot function well, thus making it more difficult to do construction with proper motivations,

producing solutions that can address more sustainable benefits rather than short-term gains. What can

education do to fix this situation? School education was invented, in response to the difficulties of

learning the complex physical and non-physical tools, as a kind of mass production of learning.

However, schools are often not designed and operated in ways that the construction mindset functions

well.

In our keynote presentation, we propose some directions for revising our education to try to answer this

question, such as a curriculum to facilitate construction mindset and how to connect construction to

empathy development in students. We hope that these attempts will help us to escape from the vicious

cycle.

References:

Illich, I. (1973). Tools for conviviality. Marion Boyars.

Toda, M. (1981). Man, robot, and society: Models and speculations. Dordrecht, The Netherland: Kluwer

Academic Publishers Group..

21

Oral Sessions

Mechanical Engineering and Technology (1)

Wednesday, March 20, 2019 09:00-10:30 Pavillion 1,9F

Session Chair: Prof. Anthony Johnson

APICENS-0084

Modeling, Analysis and Design of Mechanical Systems Involving Uncertainties

Singiresu S. Rao︱University of Miami

APICENS-0101

CAE Utilization for Preservation and Succession of Traditional Skill - Structure Modeling

of Japanese Folding Fan-

Yuto Shimada︱Kumamoto University

Fujiko Abe︱Kumamoto University

Yoshifumi Ohbuchi︱Kumamoto University

Hidetoshi Sakamoto︱Doshisha University

APICENS-0104

Effect of Bubble on Glass Bottle Fracture by Underwater Shock-Wave

Ryosuke Izutsu︱Kumamoto University


Shigeru Tanaka︱Kumamoto University


APICENS-0105

Analysis of Gun Bullet Collision Phenomenon

Shota Fukuzaki︱Kumamoto University



Hidehiro Hata︱Kumamoto University

Daisuke Inao︱Kumamoto University

22

APICENS-0108

Validity of Quantitative Evaluation Technique for Reproduce of Transitional Japanese

“Folding Fan”

Fijiko Abe︱Kumamoto University

Yoshifumi Ohbuchi ︱Kumamoto University


23

Education (1) / Psychology

Wednesday, March 20, 2019 09:00-10:30 Pavillion 2, 9F

Session Chair: Prof. Matt Stichter

APCESP-0131

The True Self as Essentially Morally Good – An Obstacle to Moral Improvement?

Matt Stichter︱Washington State University

APCESP-0099

High School Graduation Rates and College Entrance: A Small Scale Comparison Between

Select Orphanages in India and Select U.S. Groups

Brent Adams︱Hope Abides

APCESP-0116

Developing School Teacher’s Alternative Performances: Performatory Psychology in

Progress

Yuji Moro︱University of Tsukuba

Satoshi Hamamoto︱University of Tsukuba

Hiroyuki Raisaka︱University of Tsukuba

APCESP-0117

Quality Practice Teaching Experience in Cooperating Schools

Lilia M. Santiago︱Osias Colleges, Inc.

APCESP-0125

Role of Personality Traits in Predicting Student Engagement among Undergraduate

Student

Meilani Rohinsa ︱Universitas Padjadjaran

Surya Cahyadi︱Universitas Padjadjaran

Achmad Djunaidi︱Universitas Padjadjaran

Zulrizka Iskandar︱Universitas Padjadjaran

24

Materials Science and Engineering (1) / Electrical and

Electronic Engineering


Session Chair: Prof. Biswajit Ray

APICENS-0094

A Single-Stage Power Module for Indoor Photovoltaic Energy Harvesting Systems

Biswajit Ray︱Bloomsburg University of Pennsylvania

John W. Viola︱Bloomsburg University of Pennsylvania

APICENS-0110

Analysis of Anodized Aluminum for Surface Defects after Thermal Cycles

Christa Spieth︱Andrews University

Will Allen︱Andrews University

Dominique Tan-Ng︱Andrews Academy

Boon-Chai Ng︱Andrews University

APICENS-0081

High Proton Conduction of SrCe0.80Sm0.20O3- Thin Film Prepared by RF Magnetron

Sputtering

Takahiro Kono︱Tokyo University of Science

Tsunetomo Yamada︱Tokyo University of Science

Daiki Nishioka︱Tokyo University of Science

Tohru Higuchi︱Tokyo University of Science

APICENS-0082

Resistivity Control of Epitaxial Ca1-xSrxVO3 Thin Film Achieved by H+ or Li

+ Transport

Makoto Takayanagi︱Tokyo University of Science

Takashi Tsuchiya︱National Institute for Materials Science (NIMS)

Tsunetomo Yamada︱Tokyo University of Science

Tohru Higuchi︱Tokyo University of Science

25

APICENS-0099

Nonradiative Recombination Centers in UV-LED Chips Detected by Below-Gap Excitation

Light

Ken Matsuda︱Saitama University

Sota Shirai︱Saitama University

Zentaro Honda︱Saitama University

Norihiko Kamata︱Saitama University

APICENS-0123

The Pine Needle Like Structure of Zinc Oxide Nanorods Grown over Polymer Coated

Nanofibers Electrodes for Novel Flexible Supercapacitors

Syed Kamran Sami︱Balochistan University of Information Technology

Saqib Siddiqui︱Balochistan University of Information Technology

APICENS-0126

A Real-Time Embedded Buffer Control for H.264 Video Encoding System Based on

ADSP-BF609

Yu-Kai Lin︱I-Shou University

Tung-Hung Hsieh︱I-Shou University

Chou-Chen Wang︱I-Shou University

26

Business & Management /Education (2)


Session Chair: Prof. Keith H. Sakuda

APCESP-0100

Experience Curve and AB Costing (+ Target Costing)

Jan Lhota︱CTU in Prague

Alexey Ryzhkov︱CTU in Prague

APCESP-0122

Management Practices of Caregivers on the Behavior of Children with Autism Spectrum

Disorders: Basis for Behavior Modification Program

Lawrence M. Santiago︱Division of Tarlac Province

APCESP-0126

Research Capacity Building through Partnerships between International Universities

Richel Hernandez︱University of Southeastern Philippines

APCESP-0127

The Philippine Indigenous Peoples Curriculum

Richel Hernandez︱University of Southeastern Philippines

APCESP-0139

DTI’s Shared Service Facilities Program in the Province of Tarlac

Rowena Cataina Ramos︱Tarlac State University

APCESP-0140

Corruption: Some Thoughts and Ideas

Abu N.M. Wahid︱Tennessee State University

27

Chemistry / Environmental Engineering/ Computer

Engineering and Technology (1)/ Materials Science and

Engineering (1)


Session Chair: Prof. Istvan Toth

APICENS-0075

Lipophilic Vaccine Delivery Systems

Istvan Toth︱The University of Queensland

Mariusz Skwarczyski︱The University of Queensland

APICENS-0076

Polyacrylate-Based Vaccine Delivery System

Mariusz Skwarczynski︱The University of Queensland

Istvan Toth︱The University of Queensland

APICENS-0083

Mitigation Measures to Reduce or Eliminate Groundwater Impacts Caused by the

Construction of Drained Motorway Tunnels beneath Sydney, Australia

Graham Hawkes︱AECOM

APICENS-0085

Analysis of Smoke Control Models at Long Tunnel: A Case Study on the Hsuehshan Tunnel

Chen-Wei Chiu︱National Taiwan Police College

Chi-Sheng Huang︱National Taiwan Police College

APICENS-0120

Fabrication of Mesoscale Pore One-Dimensional Nanostructures by Nanoimprint

Lithography

Paritat Muanchan︱Yamagata University

Takashi Kurose︱Yamagata University

Hiroshi Ito︱Yamagata University

28

APICENS-0128

Evaluation of 3D Reconstruction Systems

Damian Bereska︱Silesian University of Technology

Karol Jedrasiak︱The University of Dąbrowa Górnicza

Aleksander Nawrat︱Silesian University of Technology

APICENS-0129

Fabrication of Polyaniline/Multiwalled Carbon Nanotube (PANI/MWCNT)

Nanocomposites as Potential Electrode Material and Improved Physiochemical Properties

Vipin Kumar Jain︱JK Lakshmipat University, Jaipur

Ajay Sharma︱Swami Keshvanand Institute of Technology

Praveen Jain︱Swami Keshvanand Institute of Technology

29

Information Engineering and Technology/ Computer

Engineering and Technology(2)/ Mechanical Engineering and

Technology(1)


Session Chair: Prof. Ji-Han Jiang

APICENS-0115

Seasonal ARIMA Model Forecasting for Restaurant Reviews Word Feature Frequency

Jutiporn Onngam︱Nation Formosa University

Ji-Han Jiang︱Nation Formosa University

APICENS-0087

Fast Face Detection from HEVC Compressed Surveillance Video

Chih-Cheng Huang︱I-Shou University

Han-Yu Huang︱I-Shou University



APICENS-0092

The Construction of a Virtual Reality-Based English Language Learning Environment

Anri Nakano︱Tokai University

Kazuhiko Hamamoto︱Tokai University

David Wright︱Tokai University

APICENS-0100

Study on Learning Intercultural Communication Using Virtual Reality

Takuto Matusuura︱Tokai University

Kazuhiko Hamamoto︱Tokai University

Kiyoko Tanaka︱Tokai University

30

APICENS-0080

Development of Solid State bonding Technique for Aluminum Alloys in Atmosphere by

High frequency Induction Heating and Ultrasonic Vibration

Keiji Sonoya︱University of Yamanashi

APICENS-0125

Field Investigation of Indoor Air Quality and Thermal Comfort for a Library Building

under Hot and Humid Climate

Fu-Jen Wang︱National Chin-Yi University of Technology

Lin-Lan Chang︱National Chin-Yi University of Technology

Dibakar Rakshit︱Indian Institute of Technology Delhi

Hsin-Hao Yang︱National Chin-Yi University of Technology

APICENS-0127

A Proposal Approach for Small Starting of International Collaboration through

International Internship Program

Yoshiro Imai︱Kagawa University

31

Computer Engineering and Technology (3) / Materials Science

and Engineering (2) / Mechanical Engineering and Technology

(2)

Thursday, March 21, 2019 09:00-10:30 Pavillion 1, 9F

Session Chair: Prof. Bhed Bahadur Bista

APICENS-0088

Incentivizing Users in Relay-Assisted Device-to-Device Communication in Cellular

Networks

Bhed Bahadur Bista︱Iwate Prefectural University

APICENS-0089

GPU-Based Fast Parallel Motion Estimation Algorithm for HEVC Encoder

Yueh-Ju Lu︱I-Shou University

Song-Hui Hong︱I-Shou University



APICENS-0090

Efficient Priority-Based Reference Frame Selection for Motion Estimation in H.265/HEVC

Ting-Hsuan Hsu︱I-Shou University

Hung-Ming Hung︱I-Shou University



APICENS-0097

Film Drainage and Coalescence of Droplets with Suspended Particles in Viscous Fluid Flow

Confined in a Circular Tube

Masahiro Muraoka︱Tokyo University of Science

Haruhito Sakurai︱Tokyo University of Science

32

APICENS-0116

A Neural Network Approach for Network Intrusion Detection System

Kojiro Chikamatsu︱Shibaura Institute of Technology

Yutaka Hirakawa︱Shibaura Institute of Technology

APICENS-0111

Simulation-Based Language Education: Assessing Learning Outcomes in Real-World Tasks


Hiroshi Nakagawa︱Tokai University

APICENS-0112

Developing a Touch-Based Assessment Interface for a Language Learning Database


Hiroshi Nakagawa︱Tokai University

33

Education (3)/Social Studies(1)


Session Chair: Prof. Aurea C. Salagan

APCESP-0115

Oral Communication Skills of the College Students of Osias Colleges, Inc.

Aurea C. Salagan︱Osias Colleges, Inc.

APCESP-0096

English Language Learning Strategies of IP College Students

Marivic N. Neri︱University of Southeastern Philippines

Mary Grace Z. Agbas︱University of Southeastern Philippines

APCESP-0119

Effects of Somatic Movement Education on the Flexibility of Middle-Aged People

Hui-Min Lin︱National Taiwan Normal University

APCESP-0124

A Comparative Study of Message, Video & Music-Centered Strategies in Image

Advertising

Seungkoo Kang︱Korea National Open University

APCESP-0132

Building Future-Ready Learners through a Pedagogical Shift in Students’ Learning

Paradigm: A Case Study of Knowledge Building Pedagogy

Chan Joo Seng Melvin︱Teck Whye Secondary School

Shanmugam Kalaichitra︱Teck Whye Secondary School

Teo Chew Lee︱National Institute of Education

APCESP-0136

From Supervisor to Mentor: Transformations in a Collaborative Partnership

Gaelle Brotto︱Bond University

Robyn Lincoln︱Bond University

34

Social Studies (2)/ Education (4)


Session Chair: Xiaohua Ma

APCESP-0123

War Memory, History Education, and Peace Building in East Asia: The Case of China and

Japan’s Rivalry over History

Xiaohua Ma︱Osaka University of Education

APCESP-0112

Artistic Practice in Social Transformation: The Case of DLiM

Jen Yoohyun Lee︱The Hong Kong Polytechnic University

APCESP-0144

A Study on the Exploration of Entrepreneurial GIFTED Students’ Flow Experience during

Involuntary Situation Through Experience Sampling Method(ESM)

Minseo Park︱KAIST (Korea Advanced Institute of Science and Technology)

Minjung Baek︱KAIST (Korea Advanced Institute of Science and Technology)

Kyunga Kwon︱KAIST (Korea Advanced Institute of Science and Technology)

Hongyeol Ryu︱KAIST (Korea Advanced Institute of Science and Technology)

APCESP-0145

A Study on the Characteristics of Entrepreneurial GIFTED Students: Youth

Entrepreneurship and Career Maturity

Minjung Baek︱KAIST (Korea Advanced Institute of Science and Technology)

Kyunga Kwon︱KAIST (Korea Advanced Institute of Science and Technology)

Minseo Park︱KAIST (Korea Advanced Institute of Science and Technology)

Jeonghui Han︱KAIST (Korea Advanced Institute of Science and Technology)

35

Poster Session

Biology / Materials Science and Engineering / Electrical and

Electronic Engineering / Civil Engineering / Physics /

Psychology / Education

Wednesday, March 20, 2019 09:30-10:30 Pre-Function

Area, 9F

APICENS-0079

Risk of Receiving Rotator Cuff Repair Surgery for Autoimmune Connective Tissue Disease

by Bootstrap Method

Hui-Wen Lin︱Soochow University, Taipei, Taiwan

Shih-Wei Huang︱Taipei Medical University

APICENS-0093

Preparation and Characterization of Gold/Titanium Dioxide Nanocomposite Fibers

through Electrospinning Technique

Onnapa Klaocheed︱Srinakharinwirot University

Panitan Wanakamol︱Srinakharinwirot University

Areeya Aeimbhu︱Srinakharinwirot University

APICENS-0109

Nonlinear PID Controller Settings for First-Order Plus Time Delay Processes

Gang-Gyoo Jin︱Korea Maritime and Ocean University

Heung-Ryol Yoo︱Korea University of Technology and Education

Yung-Deug Son︱Korea University of Technology and Education

APICENS-0121

Development of Accessible Restrooms in Disaster-Stricken Areas

Hisanori Kojima︱Osaka Prefecture University

Toshiyasu Inumaru︱Kinjo University

Tadayoshi Ueda︱Shijonawate Gakuen University

36

APICENS-0113

Phase Noise-Induced Pattern Evolution in Electroconvection of Nematic Liquid Crystals

Yoshimitsu Yano︱Kyushu Institute of Technology

Naoto Miyagawa︱Kyushu Institute of Technology

Jong-Hoon Huh︱Kyushu Institute of Technology

APICENS-0114

Direction Change of Traveling Waves in One-Dimensional Electroconvection

Akira Horikawa︱Kyushu Institute of Technology

Jong-Hoon Huh︱Kyushu Institute of Technology

APCESP-0101

Does Sensory-Processing Sensitivity Moderate the Relationship between Social Support

and Depressive Tendency?

Kosuke Yano︱Rikkyo University

Shunsuke Kimura︱Rikkyo University

Kazuo Oishi︱Rikkyo University

APCESP-0107

Social Support from Family, Teachers, and Friends in Japanese Children -Comparison

between Tokyo and the Disaster- Hit Area in Fukushima-

Aya Yamada︱Sophia University

Mitsuru Hisata︱Sophia University

APCESP-0108

Mental Health Status among Japanese Children in the Disaster-Hit Area in Fukushima

Mitsuru Hisata︱Sophia University

Aya Yamada︱Sophia University

APCESP-0111

Do Highly Sensitive People Experience Beneficial Psychological Effects from Shared

Mealtime?

Shunsuke Kimura︱Rikkyo University

Kosuke Yano︱Rikkyo University

Kazuo Oishi︱Rikkyo University

37

APCESP-0113

The Difference in the Physiological Indices, Brain Monoaminergic Neurotransmitters and

Behavior in Rats between Forced and Voluntary Exercise

Daisuke Matsunaga︱Rikkyo University

Hikaru Nakagawa︱Rikkyo University

Akira Kawata︱Rikkyo University

Takayuki Ishiwata︱Rikkyo University

APCESP-0104

The Relationship between Directors' Coaching Leadership and Organizational

Effectiveness: Focusing on the Mediating Effect of the Psychological Empowerment of

Early Childhood Teachers

Kim Jin Kyung︱Korea National Open University

Yun Hye Ju︱Duksung Women’s University

Kang Eun Hee︱Myongji University

APCESP-0142

Information Terminology List for International Students to Learn Japanese

Hironari Nozaki︱Aichi University of Education

conference program bangkok... · mechanical engineering and technology (1) ..... 21 education (1) /...

Documents