concrete patch revised: 11/10

2
FarmPaint.com Technical Data Sheet Concrete Patch 100% Acrylic Formula for Tough, Durable Repairs Revised: 11/10 Form No.: FP-TD14711 Manufacturer: FarmPaint.com 700 Phillips Lane Lexington, KY 40504 877-441-3276 Description A 100% acrylic heavy-bodied trowel grade crack filler designed for filling larger cracks up to 1” wide in concrete surfaces. Concrete Patch can also be used to fill and repair damaged and spalled areas in concrete up to 1/4” deep. Uses • Use to Repair Concrete Driveways, Floors, Patios, Sidewalks, Pool Decks, & More Surface Preparation Cleaning Cracks - Remove dirt and vegetation from cracks with screwdriver or other suitable instrument. Flush out crack with water and allow to dry. Damaged and Spalled Areas - Remove dirt and debris from repair area. Scrub thoroughly with wire brush and rinse with water. Application Apply material with rectangular trowel or wide putty knife. Spread and smooth out material flush to adjoining surface. Drying Time Allow material to dry and cure for 48 hours prior to resuming foot or vehicle traffic. Clean Up Wash tools with water before material dries. Weather Conditions • Application temperature must be a minimum of 50 °F and rising. Do not apply when temperature is expected to drop below 50 °F within a 24 hour period. • In areas where dew or fog accumulates in the early evening, it is best to coat in the morning. Stop coating by early afternoon (3:00 pm) to prevent wash off, which will occur if dew, fog, or rain arrives before coating dries. • Do not apply if rain is imminent or forecast within 24 hours of application. Coverage (Approximate) • Coverage will vary, depending on width and depth of repair. Precautions • Do Not Heat OrThin • Do Not Freeze • Do Not Store AtTemperatures Below 50 ºF Safety And Environmental Precautions • ReferTo Material Safety Data Sheet Before Using • For Exterior Application Only • Apply In A Well Ventilated Area • Close Container When Not In Use • Environmental Information Is OnThe Material Safety Data Sheet • Do Not Reuse Empty Container • Volatile Organic Content (VOC) Is 150 Gm/Liter Max • Keep Out Of Reach Of Children • Avoid BreathingVapors And Contact With Eyes And Skin. Do Not Take Internally • Wear Eye Protection And Gloves When Applying • Warning:This Product Contains Chemicals KnownToThe State Of CaliforniaTo Cause Cancer And Birth Defects Or Other Reproductive Harm Concrete Patch 100% Acrylic Formula for Tough, Durable Repairs • 100% Acrylic Formulation • Fills Cracks UpTo 1” Wide • Heavy-BodiedTrowel Grade Formula • Repairs Damaged & Spalled Areas Up to 1/4” Deep • Dries Neutral/Sand

Upload: others

Post on 09-Jan-2022

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Concrete Patch Revised: 11/10

FarmPaint.com

Technical Data Sheet

Conc

rete

Pat

ch10

0% A

cryl

ic F

orm

ula

for T

ough

, Dur

able

Rep

airs

Revi

sed:

11/

10Fo

rm N

o.: F

P-TD

1471

1

Manufacturer:FarmPaint.com700 Phillips LaneLexington, KY 40504877-441-3276

DescriptionA 100% acrylic heavy-bodied trowel grade crack filler designed for filling larger cracks up to 1” wide in concrete surfaces. Concrete Patch can also be used to fill and repair damaged and spalled areas in concrete up to 1/4” deep.

Uses•UsetoRepairConcreteDriveways,Floors, Patios,Sidewalks,PoolDecks,&More

Surface Preparation•Cleaning Cracks -Removedirtandvegetation from cracks with screwdriver or other suitable instrument. Flush out crack with water and allow to dry.•Damaged and Spalled Areas -Removedirtand debris from repair area. Scrub thoroughly with wire brush and rinse with water.

ApplicationApply material with rectangular trowel or wide putty knife. Spread and smooth out material flush to adjoining surface.

Drying TimeAllow material to dry and cure for 48 hours prior to resuming foot or vehicle traffic.

Clean UpWash tools with water before material dries.

Weather Conditions•Applicationtemperaturemustbeaminimumof 50°Fandrising.Donotapplywhentemperature is expected to drop below 50 °F within a 24 hour period. • Inareaswheredeworfogaccumulatesinthe early evening, it is best to coat in the morning. Stop coating by early afternoon (3:00 pm) to prevent wash off, which will occur if dew, fog, or rain arrives before coating dries. •Donotapplyifrainisimminentorforecastwithin 24 hours of application.

Coverage (Approximate)•Coveragewillvary,dependingonwidthand depth of repair.

Precautions•DoNotHeatOrThin•DoNotFreeze• DoNotStoreAtTemperaturesBelow50ºF

Safety And Environmental Precautions•ReferToMaterialSafetyDataSheetBeforeUsing•ForExteriorApplicationOnly•ApplyInAWellVentilatedArea•CloseContainerWhenNotInUse•EnvironmentalInformationIsOnTheMaterial SafetyDataSheet•DoNotReuseEmptyContainer•VolatileOrganicContent(VOC)Is150 Gm/LiterMax•KeepOutOfReachOfChildren•AvoidBreathingVaporsAndContactWithEyes AndSkin.DoNotTakeInternally•WearEyeProtectionAndGlovesWhenApplying•Warning:ThisProductContainsChemicals KnownToTheStateOfCaliforniaToCauseCancer AndBirthDefectsOrOtherReproductiveHarm

Concrete Patch100% Acrylic Formula for Tough, Durable Repairs

•100%AcrylicFormulation •FillsCracksUpTo1”Wide •Heavy-BodiedTrowelGradeFormula •RepairsDamaged&SpalledAreasUp to1/4”Deep•DriesNeutral/Sand

Page 2: Concrete Patch Revised: 11/10

700PhillipsLane•Lexington,KY40504Phone: 877-441-3276

Copyright © 2010, FarmPaint.comAll rights reserved.

FarmPaint.com

Packaging

Item# ContainerSize Pack Weight

14711 .9 Gallon Pail 6 99.8 lbs.

* At time of manufacturing, containers are filled to maximum.However,duetothereductioninvolumethat occurs after cooling and settling, the actual volume may be less.

Ingredients: Cas No.Water 7732-18-5

Acrylic Polymer Proprietary

Fiber 9004-34-6

EsterAlcohol 25265-77-4

SiliconDioxide 14808-60-7

FormNo.:FP-TD14711Revised:11/10