concrete national precast concrete ... - moulds for concrete

CONCRETE

RECKLI Australia & New Zealand Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 AustraliaPostal Address: PO Box 120 Sunshine Victoria 3020 Australia Mobile: 0418 176 044 Fax: 03 8361 7186 Email: [email protected] Web: www.reckli.com

National Precast Concrete Association Australia

(Associate Member)

Member

Changing the face of concrete

2009 Catalogue


...To ThisFrom This...

Make Your Own MouldsBalastrades Moulds

Supersedes our previous “2008 Catalogue” and now allows for 14 NEW extra pages and patterns2009 Catalogue

TICK CIRCULATION

For extra copies:please email:

[email protected] or fax: 03 8361 7186

RECKLI are suppliers of Rubber Moulds & Form-Liners for patterns on concrete panels & other concrete elements. RECKLI offers flexible & re-usable mould liners for architectural concrete/GRC units. RECKLI moulds will assist in increasing kerb appeal, enhancing architectural expression & integrate structures with their surroundings.

Reckli OfficesGermany (Head Office)

AndorraAustraliaAustriaBelgiumCanada

China x2Finland x2FranceHong KongIndiaIran

IrelandIsrealItalyMalaysiaNetherlandsNew Zealand

NorwayPolandPortugalRussiaSaudi ArabiaSingapore

South KoreaSpainSwedenTaiwanThailandTurkey

U.A.EU.S.AUK x2

Noise Reduction Wall Formliner Standard Patterns

Liquid rubber: For Make-your-own formliners and mould and pattern making as well as for the surfaces protection. The complex area of application goes form the preservation of monuments and restoration of valuable elements of buildings, as well to the mould making in the porcelain and ceramic industry.

Custom Patterns

CONCRETE

MOULDS

By

Precast Elements Insitu-Cast Elements Stack/Site Cast ElementsGRC - Glass Re-inforced Concrete Prestressed Elements

If Reckli formliners are used as outlined in our application guide, we guarantee 50 re-uses for standard formliners with a prefix 1/xx and 100 re-uses for formliners with a prefix 2/xx.Our support against liability under any proven claims and compensation is limited the value of the purchase price or replacing that portion of defective formliner(s).

Sam Burrone Design 03 9734 1424

Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]

Visit our Website for a full view of these patterns: www.reckli.com Changing the face of Concrete

G.R.C. (Glass Fibre Reinforced Concrete) Examples

Page 42

RECKLI moulds can beused on:

Acoustic Panels & Walls

Noise Barriers

Block Retaining Walls

Decorative Finishes

Moulds for Exterior Ornaments

Landscape Elements

Decorative Concrete

Retaining Walls Design

RECKLI is a world leader in the design and manufacture of elastic formliners and moulds and liquid rubbers for the production of such formliners and moulds.

Formliners:For attractive surface modulation and shaping of exposed concrete. RECKLI Formliners are used in precasting factories and in cast-in-situ concrete. Since 1968, we have the experience with structured formliners, competence in all questions about textured and exposed concrete and Millions square metres of structured concrete as reference and trusted evidence.

Auxiliary products:Like Demoulding Materials, Formliners Adhesive and Cleanser, Filler and Thickener or cement-bound products supplement our range and offer the user a suitable solution for users own requirements.

Using RECKLI formliners

Formliners come in a range of decorative shapes & textures


Actual rubber mould

Reckli formliners are perfect when you need repetitive & consistent results


Actual rubber mould

2/175 Friesland Formliner

Moulds forGRC tiles

Index and Pattern GroupsDisplay Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]

Graphic & Photo Engraved Technology6-37

Oriental PatternsPage 34

Wood PatternsPage 8-16

Rough Cast & Textured PatternsPage 6-7

Broken Rib PatternsPage 3-5

Geometric PatternsPage 33

Rib & Wave PatternsPage 30-33

Brick & Masonry PatternsPage 21-26

Abstract PatternsPage 17-20

Stone & Rock PatternsPage 27-29

Anti Slip PatternsPage 35-36

General ExamplesPage 38-42

Changing the face of Concrete

View gallery of samples at

The Melbourne Display Centre

Building 1, 123 Pipe Rd

North Laverton Victoria Australia

Page 2

1/45 B-SiciliaWeb Link: www.reckli.de/1_45.htm

[mm]

side elevation

1/41 B-IbizaWeb Link: www.reckli.de/1_41.htm

[mm]

side elevation

15 35

52

388

995

7200

1/29 KreteWeb Link: www.reckli.de/1_29.htm

[mm]

side elevation

100Ø 30 Ø 70

10

50

995

4800

1/09 B-NorderneyWeb Link: www.reckli.de/1_09.htm

[mm]

side elevation

10

4525

30 150100

995

5000

1/347 B-Fort de FranceWeb Link: www.reckli.de/1_347.htm

[mm]

side elevation

45

4870

8

221055

6000

60

54 24 503939

10

1020

5000

Precast Panels Using “1/21 B-Malta” Pattern

1/21 B-MaltaWeb Link: www.reckli.de/1_21.htm

[mm]

side elevation

15 35

5238

8

995

5000

Page 3

Broken Rib PatternsBroken Rib PatternsDisplay Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 Australia M: 0418 176 044 F: (+61 3) 8361 7186 E: [email protected]


All patterns on this page are available in 3 weeks

Precast Panels Using “1/09 B-Norderney” Pattern

PROJECT EXAMPLE

SEE PAGE 39

Go to weblink of each pattern for actual project reference of particular pattern

1/38 B-Rippe Type KWeb Link: www.reckli.de/1_38.htm

[mm]

side elevation

70 Ø 50

4430

20

10

1045

4000

1/316 B-PennsilvaWeb Link: www.reckli.de/1_316.htm

[mm]

side elevation

32

38 7

8

1165

6050

1/37 B-Rippe Type JWeb Link: www.reckli.de/1_37.htm

[mm]

side elevation

19

8

27 27

28

1225

4950

Precast Panels Using “1/316 B-Pennsilva” Pattern - Gravity Water Tower

2/56 B-GaronneWeb Link: www.reckli.de/2_56.htm

[mm]

side elevation

Ø 40Ø 20

12515

26167

4000 / 7300

7300

/ 40

00

1/124 B-TaroWeb Link: www.reckli.de/1_124.htm

side elevation

[mm]

27

802030

8

995

7000

Precast Panels Using “2/56 B-Garonne” Pattern

“1/38 B-Rippe Type K” Pattern UsedOn This Housing Development



Precast Panels Using “1/316 B-Taro” Pattern


Page 4All patterns on this page are available in 3 weeks

2/107 B-MekongWeb Link: www.reckli.de/2_107.htm

[mm]

side elevation

2/106 B-AmurWeb Link: www.reckli.de/2_106.htm

[mm]

side elevation

7

1020

14

3800

6900

2/108 B-IndusWeb Link: www.reckli.de/2_108.htm

[mm]

side elevation

6

15Ø10

11

3800

7000

6 19

30

8

30 30

3800

6900

2/87 B-OhioWeb Link: www.reckli.de/2_87.htm

[mm]

side elevation

7

Ø 30 42

2317

5000

3300

2/30 B-HavelWeb Link: www.reckli.de/2_30.htm

[mm]

side elevation

Ø 2233

197

3800 / 7300

7300

/ 38

00

Precast Balconies Using “2/30 B-Havel”Pattern - Apartment Complex

1/126 B-LarnakaWeb Link: www.reckli.de/1_126.htm

[mm]

side elevation

10010

353026

8

995

5000 “1/126 B-Larnaka”

Pattern UsedIn Bridge AbutmentRetaining Wall

“2/108 B-Indus” Pattern Used For ThisParklands Gate House



Page 5 All patterns on this page are available in 3 weeks

2/150 B-VosgesWeb Link: www.reckli.de/2_150.htm

[mm]

side elevation

30 19 237

Ø10

1240

6000


2/76 NilWeb Link: www.reckli.de/2_76.htm

[mm]

side elevation

612

7000

3900

2/104 SambesiWeb Link: www.reckli.de/2_104.htm

[mm]

side elevation

136

10000

4000

2/93 Red RiverWeb Link: www.reckli.de/2_93.htm

[mm]

side elevation

8000

3800

86

2/105 EuphratWeb Link: www.reckli.de/2_105.htm

side elevation

[mm]

4000

10000

126

2/103 LenaWeb Link: www.reckli.de/2_103.htm

side elevation

96

10000

4000

[mm]

2/92 Rio BravoWeb Link: www.reckli.de/2_92.htm

[mm]

side elevation

4800

3350

96

Precast Panels Using “2/104 Sambesi”Pattern - Apartment Complex

2/62 TevereWeb Link: www.reckli.de/2_62.htm

[mm]

side elevation

87

7300

3800




Rough Cast and Textured Patterns

2/102 ParanaWeb Link: www.reckli.de/2_102.htm

[mm]

side elevation

10000

4000

86Precast Panels Using “2/92 Rio Bravo”

Pattern - Apartment Complex


2/68 ArnoWeb Link: www.reckli.de/2_68.htm

[mm]

side elevation

2/34 LahnWeb Link: www.reckli.de/2_34.htm

[mm]

side elevation

7000

3000

96

10000

4000

617



Rough Cast and Textured Patterns


2/91 Rio GrandeWeb Link: www.reckli.de/2_91.htm

[mm]

side elevation

6000

3900

613

2/133 ToscanaWeb Link: www.reckli.de/2_133.htm

[mm]

side elevation

4000

7800

96

2/69 MarneWeb Link: www.reckli.de/2_69.htm

[mm]

side elevation

10000

4000

176

Insitu Panels Using “2/69 Marne” Pattern

2/33 IsarWeb Link: www.reckli.de/2_33.htm

[mm]

side elevation

2/131 LausitzWeb Link: www.reckli.de/2_131.htm

side elevation

2/132 TaunusWeb Link: www.reckli.de/2_132.htm

side elevation

[mm] [mm] 3800

7200

96

3800

7200

96

7000

3000

96



Go to weblink of each pattern for actual project reference of particular pattern Changing the face of Concrete

Wood Patterns


1/27 SeelandWeb Link: www.reckli.de/1_27.htm

side elevation

[mm]

94

200

15

995

5000

1/28 LollandWeb Link: www.reckli.de/1_28.htm

[mm]

side elevation

7010

995

5000

200

1/03 FehmarnWeb Link: www.reckli.de/1_03.htm

[mm]

side elevation

98-103

5010

995

5000

1/04 FohrWeb Link: www.reckli.de/1_04.htm

[mm]

side elevation

97-103

488

995

5000

1/24 GotlandWeb Link: www.reckli.de/1_24.htm

side elevation

[mm]

10

100

45

995

5000

1/08 MainauWeb Link: www.reckli.de/1_08.htm

[mm]

side elevation

130-170

7010

995

5000

1/07 LangeoogWeb Link: www.reckli.de/1_07.htm

side elevation

[mm] 130-170

7010

995

5000

Insitu Panels Using “1/27 Seeland” Pattern

Insitu Panels Using “1/07 Langeoog” Pattern



Wood Patterns


1/10 PellwormWeb Link: www.reckli.de/1_10.htm

[mm]

side elevation

8 2032100-160

995

5000

1/18 BornholmWeb Link: www.reckli.de/1_18.htm

[mm]

side elevation4527

55-190

10

995

4500

1/317 RusticWeb Link: www.reckli.de/1_317.htm

side elevation

[mm]

N = Niveau 0, 7, 13, 20 mm

30-100 NN 30-100

NN 278

995

5980

1/01 AmrumWeb Link: www.reckli.de/1_01.htm

[mm]

side elevation

63-6842-47 20-2683-87 2535

8

995

5000

2/168 SommeWeb Link: www.reckli.de/2_168.htm

[mm]

side elevation

20-75

35

8

1270

7900

Precast Panels Using “2/168 Somme” Pattern

NEW

2/167 TrentWeb Link: www.reckli.de/2_167.htm

[mm]

side elevation

238104 95100

2440

8600

NEW

Precast Panels Using “2/167 Trent” Pattern

Insitu Panels Using “1/317 Rustic” Pattern




Wood Patterns


2/84 MissouriWeb Link: www.reckli.de/2_84.htm

side elevation

2/96 NigerWeb Link: www.reckli.de/2_96.htm

[mm]

side elevation

2/25 EderWeb Link: www.reckli.de/2_25.htm

side elevation

[mm] [mm] 9895102 15

7

3900 / 7470

5300

/ 40

00

7

100100

15

6900

2950

60-110 60-110

N N N

N = Niveau 0, 2, 4, 7 mm

N

137

3800 / 7200

5900

/ 38

00

2/144 SpessartWeb Link: www.reckli.de/2_144.htm

[mm]

side elevation

965

5950

5518

139

1514

1/331 EtampesWeb Link: www.reckli.de/1_331.htm

[mm]

side elevation

25

190

8

945

5500

2/83 TejoWeb Link: www.reckli.de/2_83.htm

[mm]

side elevation

1023

75

6000

3500

2/97 KongoWeb Link: www.reckli.de/2_97.htm

[mm]

side elevation

5

984

7 9

3800

5300

Precast Panels Using “1/331 Etampes” Pattern Precast Panels Using “2/25 Eder” Pattern

PROJECT EXAMPLE

SEE PAGE 40




Wood Patterns


2/82 ColoradoWeb Link: www.reckli.de/2_82.htm

[mm]

side elevation

1788

147

Fix 1065

3000

2/26 ElbeWeb Link: www.reckli.de/2_26.htm

[mm]

side elevation

7

2212115

149

3560 / 7300

5500

/ 38

00

2/163 FraserWeb Link: www.reckli.de/2_163.htm

side elevation

[mm]

8 13

9650

995

200

8017

015

012

018

010

0

2/74 UralWeb Link: www.reckli.de/2_74.htm

[mm]

side elevation

1297

690

3900 / 7300

5600

/ 38

00

2/20 AhrWeb Link: www.reckli.de/2_20.htm

side elevation

[mm]

90

8

3800 / 7300

6700

/ 38

00

2/51 SpreeWeb Link: www.reckli.de/2_51.htm

[mm]

side elevation

15102

147

3800 / 7300

7300

/ 38

00

2/73 TisaWeb Link: www.reckli.de/2_73.htm

[mm]

side elevation

107

83

Fix 995

4000

Precast Panels Using “2/82 Colorado” Pattern

Precast Walls Using “2/73 Tisa” Pattern




Wood Patterns


2/27 EmsWeb Link: www.reckli.de/2_27.htm

[mm]

side elevation

100

8

3800 / 73007000

/ 38

00

150-

250

Precast Panels Using “2/27 EMS”Pattern - Rail Station Platform

2/22 AltmuhlWeb Link: www.reckli.de/2_22.htm

[mm]

side elevation

90

8

3800 / 7300

6850

/ 38

00

2/21 AllerWeb Link: www.reckli.de/2_21.htm

side elevation

[mm]

8

90

3800 / 7200

5300

/ 38

00

2/24 DonauWeb Link: www.reckli.de/2_24.htm

[mm]

side elevation

9

170

7

3800 / 7300

4400

/ 38

00

2/23 AlsterWeb Link: www.reckli.de/2_23.htm

[mm]

side elevation

160-180

8

3800 / 7250

4450

/ 38

00

Precast Panels Using “2/27 EMS” Pattern

Rail Station Wall Using “2/23 Alster” Pattern Retaining Walls Using “2/24 Donau” Pattern




Wood Patterns


1/20 KerkyraWeb Link: www.reckli.de/1_20.htm

[mm]

side elevation

2010

35

100

995

5000

150

100

50

2/32 InnWeb Link: www.reckli.de/2_32.htm

[mm]

sectional profile

2/48 RuhrWeb Link: www.reckli.de/2_48.htm

sectional profile

2/337 MiramasWeb Link: www.reckli.de/2_337.htm

sectional profile

[mm] [mm]

2/116 ArdecheWeb Link: www.reckli.de/2_116.htm

[mm]

side elevation

228

3800

6400

2/28 EmscherWeb Link: www.reckli.de/2_28.htm

[mm]

side elevation

19250

7

7000

3750

7

8-18 18

3800 / 7250

7300

/ 38

00

13-26 217

1005

6050

18 177

3800 / 7300

7300

/ 38

00

2/31 IllerWeb Link: www.reckli.de/2_31.htm

[mm]

sectional profile

4-11

147

3800 / 7300

6700

/ 38

00

2/47 RheinWeb Link: www.reckli.de/2_47.htm

[mm]

side elevation

25

20

5

3800 / 7300

7300

/ 38

00

1/05 HelgolandWeb Link: www.reckli.de/1_05.htm

[mm]

side elevation

1/06 JuistWeb Link: www.reckli.de/1_06.htm

side elevation

[mm]

1/02 BorkumWeb Link: www.reckli.de/1_02.htm

[mm]

side elevation

5510

100995

5000

100

200

66

200

100

1/17 WollinWeb Link: www.reckli.de/1_17.htm

side elevation

[mm] 100

4510

995

5000

9595

10 30250 12525 25

995

5000

3012525025 25 10

995

5000

Precast Walls Using “2/116 Ardeche” Pattern

Precast Walls Using “2/47 Rhein” Pattern Precast Wall Using “2/47 Rhein” Pattern

Precast Walls Using “1/17 Wollin” Pattern




Wood Patterns


1/12 RugenWeb Link: www.reckli.de/1_12.htm

[mm]

side elevation

200100

10N N NNN

N = Niveau 0, 5, 8,15, 25

35

995

5000

2/53 WeserWeb Link: www.reckli.de/2_53.htm

[mm]

side elevation

5150

19

3800 / 7300

7300

/ 38

00

1/05 HelgolandWeb Link: www.reckli.de/1_05.htm

[mm]

side elevation

10 30250 12525 25

995

5000

1/06 JuistWeb Link: www.reckli.de/1_06.htm

side elevation

[mm]

3012525025 25 10

995

5000

1/02 BorkumWeb Link: www.reckli.de/1_02.htm

[mm]

side elevation

5510

100995

5000

100

200

66

200

100

Precast Walls Using “2/53 Weser” Pattern

Precast Walls Using “1/12 Rugen” Pattern Precast Walls Using “1/12 Rugen” Pattern

Precast Walls Using “1/05 Helgoland” Pattern


1/15 UsedomWeb Link: www.reckli.de/1_15.htm

[mm]

side elevation

68 125125

50

10

4526

29995

5000



Wood Patterns


1/25 BaltrumWeb Link: www.reckli.de/1_25.htm

[mm]

side elevation

120 806

15

6023

46

995

5000

1/26 AmelandWeb Link: www.reckli.de/1_26.htm

[mm]

side elevation

109014019060

N = Niveau 0, 10, 20, 30, 45

N N N NN40

55

995

5000

2/43 NaheWeb Link: www.reckli.de/2_43.htm

[mm]

side elevation

21-2495-100

26-3033-37

187

3700 / 7200

7200

/ 37

00

2/48 RuhrWeb Link: www.reckli.de/2_48.htm

side elevation

[mm]

7

8-18 18

3800 / 7250

7300

/ 38

00

2/337 MiramasWeb Link: www.reckli.de/2_337.htm

side elevation

[mm]

13-26 217

1005

6050

Precast Walls Using “2/48 Ruhr” Pattern

Precast Walls Using “2/337 Miramas” Pattern

Precast Walls Using “1/15 Usedom” Pattern




Wood Patterns


2/154 VentaWeb Link: www.reckli.de/2_154.htm

[mm]

side elevation

8265 - 30

1005

2490

2/155 Venta inversWeb Link: www.reckli.de/2_155.htm

side elevation

[mm]

8265 - 30

1005

2490

2/152 MartiniqueWeb Link: www.reckli.de/2_152.htm

side elevation

[mm]

338

1245

4990

5-40

2/153 Martinique inversWeb Link: www.reckli.de/2_153.htm

side elevation

[mm]

833

5-40

1245

4990

Precast Bridge Abutment & Earth RetainingWalls Using “1/12 Rugen” Pattern

2/32 InnWeb Link: www.reckli.de/2_32.htm

[mm]

side elevation

18 177

3800 / 7300

7300

/ 38

00

2/31 IllerWeb Link: www.reckli.de/2_31.htm

[mm]

side elevation

4-11

147

3800 / 7300

6700

/ 38

00

Precast Walls Using “2/154 Venta” Pattern

Precast Walls Using “2/152 Martinique” Pattern

Precast Walls Using “2/32 Inn” Pattern




Abstract Patterns


2/37 LenneWeb Link: www.reckli.de/2_37.htm

[mm]

side elevation

85

7300

3800

2/61 ThamesWeb Link: www.reckli.de/2_61.htm

[mm]

side elevation

86

3900 / 7500

8750

/ 40

00

2/98 VltavaWeb Link: www.reckli.de/2_98.htm

[mm]

side elevation

96

7400

3400

2/169 ColumbiaWeb Link: www.reckli.de/2_169.htm

[mm]

side elevation

8

36

80-155

3960

4950

2 x 1980

NEW

2/42 NaabWeb Link: www.reckli.de/2_42.htm

[mm]

side elevation

145

3800 / 7300

7400

/ 38

00

Feature Wall Using “2-42 Naab” Pattern

Precast Panels Using “2-169 Columbia” Pattern


2/701 Liberty

[mm]

20-300

8 40

1800

1300

0End view of this form liner

Insitu Panels Using“2-701 Liberty” Pattern



Abstract Patterns


1/14 SyltWeb Link: www.reckli.de/1_14.htm

[mm]

side elevation

5335

2810

10050

995

4980

NEW

Precast Panels Using “1/14 Sylt” Pattern

1/43 CorseWeb Link: www.reckli.de/1_43.htm

[mm]

side elevation

8

55 45 25 15 38

995

5000

1/44 B-SardegnaWeb Link: www.reckli.de/1_44.htm

[mm]

side elevation

55 4525 3610

995

5000

2/44 NeckarWeb Link: www.reckli.de/2_44.htm

[mm]

side elevation

7

10012

121840

3700 / 7270

7200

/ 38

00

2/49 SaaleWeb Link: www.reckli.de/2_49.htm

[mm]

side elevation

30-90 30-90 30-90

20106

3800 / 7300

7300

/ 38

00

Precast Panels Using “2/44 Neckar” Pattern

Precast Panels Using “2/49 Saale” PatternPrecast Panels Using “2/49 Saale” Pattern

PROJECT EXAMPLE

SEE PAGE 39

PROJECT EXAMPLE

SEE PAGE 39




Abstract Patterns


2/45 OderWeb Link: www.reckli.de/2_45.htm

side elevation

[mm]

22-42 18-42 55-180

19

6488

3800 / 7000

7300

/ 38

00

2/57 LoireWeb Link: www.reckli.de/2_57.htm

side elevation

[mm]

18-150 18-150 217

4000

7500

2/50 SiegWeb Link: www.reckli.de/2_50.htm

[mm]

side elevation

7 131077-154

77-1543800 / 7300

7300

/ 38

00

2/59 RhoneWeb Link: www.reckli.de/2_59.htm

[mm]

side elevation

1323

7

80 120

3900 / 7500

7500

/ 40

00

Elevated Road Support-Precast Retaining WallUsing “2/79 Mayenne & 2/59 Rhone” Patterns

Insitu-Cast Panel Using “2/50 Sieg” Pattern

Precast Panel Using “2/45 Oder” Pattern

Precast Panel Using “2/50 Sieg” Pattern

Precast Panel Using “2/45 Oder” Pattern




Abstract Patterns


2/174 BreisgauWeb Link: www.reckli.de/2_174.htm

[mm]

side elevation

60

7 11

21

6200

3350

116

32

Precast Panels Using “2/174 Breisgau” Pattern

NEW

2/318 Pierre de SableWeb Link: www.reckli.de/2_318.htm

[mm]

side elevation

137

1800

5700

2/151 GirondeWeb Link: www.reckli.de/2_151.htm

[mm]

side elevation31

8

10000

3000

2/125 DordogneWeb Link: www.reckli.de/2_125.htm

[mm]

side elevation

316

3000

8900

Precast Panel - Boundary Walls Using “2/125 Dordogne” Pattern

Precast Panels Using “2/151 Gironde” PatternPrecast Panels Using

“2/318 Pierre de Sable” Pattern

Precast Panels Using “2/125 Dordogne” Pattern


2/70 PoWeb Link: www.reckli.de/2_70.htm

[mm]

side elevation

137

235 - 24010

8020

4000

5210

2/39 MainWeb Link: www.reckli.de/2_39.htm

side elevation

[mm]

207

8950

2990

75

2/71 DonWeb Link: www.reckli.de/2_71.htm

side elevation

[mm]

200202

217

7700

14

50

*157

0

* verzahnt · toothed out · raccor dable par emboitement · dentellato · dent ada

127

24010

4000

2000

7112

.3

2/99 SalzachWeb Link: www.reckli.de/2_99.htm

[mm]

side elevation

10

7 12

8900

3650

1052

2/40 MohneWeb Link: www.reckli.de/2_40.htm

[mm]

side elevation

2/65 DrauWeb Link: www.reckli.de/2_65.htm

[mm]

side elevation

24010

7 12

4000

2000

5210



Brick and Masonry Patterns


Precast Panels Using “2/99 Salzach” Pattern

Precast Panels Using “2/70 Po” Pattern

Precast Panels Using “2/39 Main” Pattern

235 - 240

235 - 240


1/165 B RenoWeb Link: www.reckli.de/1_165.htm

[mm]

side elevation

36 52 1045

3000

1000

190

10

2/89 DueroWeb Link: www.reckli.de/2_89.htm

[mm]

side elevation

600

127

5960

2970

300

15585

117

6000

3000

585

2/88 TraveWeb Link: www.reckli.de/2_88.htm

[mm]

side elevation

2/141 DachsteinWeb Link: www.reckli.de/2_141.htm

[mm]

side elevation

10

67.5

115 103000

1000

7110





Precast Panels Using “2/141 Dachstein” Pattern

Precast Panels Using “1/165 Reno” Pattern

Precast Panels Using “2/89 Duero” Pattern

2/177 WestfaliaWeb Link: www.reckli.de/2_177.htm

[mm]

side elevation

8 17281201620

4350

1490

120

Precast Panels Using “2/177 Westfalia” Pattern

NEW


2/143 SollingWeb Link: www.reckli.de/2_143.htm

[mm] 410-690 7-11

3310

8

3310* 3770

1990

245

-255

* toothed out irregularyside elevation

2/78 GangesWeb Link: www.reckli.de/2_78.htm

[mm]

7 22 27

5120

2280

* 5300

toothed outside elevation





Precast Panels Using “2/130 Pommern” PatternPrecast Panels Using “2/143 Solling” Pattern

2/140 CamargueWeb Link: www.reckli.de/2_140.htm

[mm]

69

108

13

240

* verzahnt

2730

2600

* 2860

190

10

* toothed out side elevation

2/128 HudsonWeb Link: www.reckli.de/2_128.htm

[mm]

15-20 360-365 716 20

* verzahnt

2460

2280

170

-175

15 -

20

* 2640

side elevation toothed out

22

27

5 240-540 8

4590

1350

220

* 4720

5

2/130 PommernWeb Link: www.reckli.de/2_130.htm

[mm]

side elevation toothed outPrecast Panels Using “2/78 Ganges” Pattern

Precast Panels Using “2/128 Hudson” Pattern

170

-175

15 -

20

15-20360-365






Precast Panels Using “2/72 Ob” Pattern

2/139 AuvergneWeb Link: www.reckli.de/2_139.htm

[mm] 4-12

150-500

8 1333

* verzahnt

4990

1250

120

* 5150

* toothed outside elevation

2/312 EngadinWeb Link: www.reckli.de/2_312.htm

[mm]

side elevation

26

15-20 60-490

7

2490

1000

45-2

00

160-540

458

20-30

160-

170

/ 340

-360

1400

1500

2/149 TirolWeb Link: www.reckli.de/2_149.htm

side elevation

[mm]

Half joint all around

2/147 AllgauWeb Link: www.reckli.de/2_147.htm

[mm] 160-540

458

20-30

160-

170

/ 3

40-3

60

1400

1500

Half joint all aroundside elevation

2/72 ObWeb Link: www.reckli.de/2_72.htm

[mm]

side elevation

10490

20157

7500

1200

140

9040

10

Precast Panels Using “2/147 Allgau” Pattern

Precast Panels Using “2/139 Auvergne” Pattern

Precast Panels Using “2/312 Engadin” Pattern


1/127 ShannonWeb Link: www.reckli.de/1_127.htm

[mm]

side elevation

30

120-300

8

2000

995

100-

140

120-300

100-

140





Precast Panels Using “2/135 Provence” Pattern

2/137 BourgogneWeb Link: www.reckli.de/2_137.htm

[mm]

side elevation

2212880-550 7-25

2500

2300

80-3

907-

30

2/311 Zyklop Web Link: www.reckli.de/2_311.htm

[mm]

side elevation

20

150-40015-30

6

1250

2510

70-4

00

2/135 ProvenceWeb Link: www.reckli.de/2_135.htm

[mm]

1812830-400 20-45

4970

1230

* 5140

20-2

50

side elevation* toothed out

2/374 La ReunionWeb Link: www.reckli.de/2_374.htm

[mm]

side elevation

844

25-120100-460

4990

1245

120-

390

Precast Panels Using “2/137 Bourgogne” Pattern

2/79 MayenneWeb Link: www.reckli.de/2_79.htm

[mm]

side elevation

32

80-43080-430

7

7000

3000

45-1

4545

-145

“1/127 Shannon” Pattern Used InsituCast Method For This Floodway

PROJECT EXAMPLE

SEE PAGE 40


1/354 DuranceWeb Link: www.reckli.de/1_354.htm

[mm]

side elevation

1070

2525

1075





Precast Panels Using “1/354 Durance” Pattern

2/160 Via AppiaWeb Link: www.reckli.de/2_160.htm

[mm]

side elevation

843

130-51010-35

1850

5000

70-1

70

Precast Panels Using “2/147 Allgau” Pattern

Precast Panels Using “2/353 Tarn” Pattern

2/146 AndaluciaWeb Link: www.reckli.de/2_146.htm

[mm]

8

40-400 5-20

38

3990

1060*1200

30-2

00

toothed out irregularyside elevation

2/353 TarnWeb Link: www.reckli.de/2_353.htm

[mm]

side elevation

36

170-55015-40

167

4350

1145

45-2

50

2/161 EsterelWeb Link: www.reckli.de/2_161.htm

[mm]

side elevation

838

6000

1250

2/164 BrabantWeb Link: www.reckli.de/2_164.htm

side elevation

[mm]

The total size of this pattern consist of 4 di�erent toothed out formliner parts.

438

5-35100-520

3000

10000

20-1

30

4200+5800

2 x

1500

Precast Panels Using “2/146 Andalucia” Pattern


2/90 TravertinWeb Link: www.reckli.de/2_90.htm

[mm]

side elevation

137

3600

4650

2/123 TennesseeWeb Link: www.reckli.de/2_123.htm

[mm]

side elevation

6 9

2700

3000

“2/123 Tennessee” Pattern UsedIn This Office Block



Stone and Rock Patterns


2/156 SteinwaldWeb Link: www.reckli.de/2_156.htm

[mm]

side elevation

36

8

6000

3000

2/157 FichtelbergWeb Link: www.reckli.de/2_157.htm

[mm]

side elevation

6000

3000

198

2/166 CilentoWeb Link: www.reckli.de/2_166.htm

side elevation

[mm]

10 12

6600

2950

Precast Panels Using “2/90 Travertin” Pattern

Precast Panels Using “2/156 Steinwald” Pattern Precast Panels Using “2/157 Fichtelberg” Pattern


2/122YukonWeb Link: www.reckli.de/2_122.htm

[mm]

side elevation

277

3800

5900





2/158 BavariaWeb Link: www.reckli.de/2_158.htm

[mm]

side elevation

846

3050

5900

2/159 LuganoWeb Link: www.reckli.de/2_159.htm

[mm]

side elevation

818

3200

7800

2/121 Cheyenne Web Link: www.reckli.de/2_121.htm

[mm]

side elevation

46

7

7000

7000

5 x 1400

2/145 Schiefer Web Link: www.reckli.de/2_145.htm

side elevation

[mm]

714

860

- 870

2190 - 2390?

2/173 Santa CruzWeb Link: www.reckli.de/2_173.htm

[mm]

side elevation

47

7

4980

6000

4 x 1245

NEW

Precast Panels Using “2/121 Cheyenne” Pattern Precast Panels Using “2/121 Cheyenne” Pattern

Precast Panels Using “2/122 Yukon” Pattern


Precast Panels Using “2/170 Romanche” Pattern

2/136 BretagneWeb Link: www.reckli.de/2_136.htm

[mm]

60-180 10-40

834

2900

1000

*2950

* verzahnt · toothed out · raccor dable par emboitement · dentellato · dent ada side elevation

2/142 TessinWeb Link: www.reckli.de/2_142.htm

[mm]

side elevation

40-100 10-30

188

800

4800

96

1/352 EmbrunWeb Link: www.reckli.de/1_352.htm

[mm]

side elevation

50

60-20010-50

8

2720

1050

“1/352 Embrun” Pattern Used As StripFeature On Office Complex





“2/121 Cheyenne” Pattern Used AsNoise Barrier Walls

2/41 MoselWeb Link: www.reckli.de/2_41.htm

[mm]

side elevation

145

7300

3400

“2/41 Mosel” Pattern Used In Car Park Complex

2/170 RomancheWeb Link: www.reckli.de/2_170.htm

[mm]

side elevation

24-83 8

26

1950

5400

NEW

Precast Panels Using “2/136 Bretagne” Pattern

PROJECT EXAMPLE

SEE PAGE 40


Precast Panels Using “1/31 Rippe Type C” Pattern

2/77 TigrisWeb Link: www.reckli.de/2_77.htm

[mm]

side elevation

1192422 18

8

5600

3600

1/31 Rippe Type CWeb Link: www.reckli.de/1_31.htm

[mm]

side elevation

4060 40

10

50

995

5000



Rib and Wave Patterns


1/30 Rippe Type AWeb Link: www.reckli.de/1_30.htm

1/32 Rippe Type DWeb Link: www.reckli.de/1_32.htm

1/39 Rippe Type LWeb Link: www.reckli.de/1_39.htm

1/40 Rippe Type MWeb Link: www.reckli.de/1_40.htm

875

50 306020

5000

7010

40 20

5010

955

4800

2535[mm]

side elevation

[mm]

side elevation

15

5510

995

5000

3515[mm]

side elevation

20 4010

995

5000

30 20 Ø3

[mm]

side elevation

1/33 Rippe Type EWeb Link: www.reckli.de/1_33.htm

1/34 Rippe Type FWeb Link: www.reckli.de/1_34.htm

25

1040

1015

4980

3525[mm]

side elevation

1048

975

5000

3811 11[mm]

side elevation

1/35 Rippe Type GWeb Link: www.reckli.de/1_35.htm

1/36 Rippe Type HWeb Link: www.reckli.de/1_36.htm

15 3510

995

5000

25 15

[mm]

side elevation

15 3510

995

5000

35 2525

[mm]

side elevation

Ø3

1/148 LanzaroteWeb Link: www.reckli.de/1_148.htm

[mm]

side elevation

15 35

10

50

60

995

5000

Precast Retaining Wall Using “1/148 Lanzarote” Pattern


2/75 KocherWeb Link: www.reckli.de/2_75.htm

[mm]

side elevation

760 4060

23

1400

5500

Precast Elevated Road Support Columns Using “Non-Std” Rib Formliner

Precast Panels Using “1/46 Rippe Type N” Pattern


Go to weblink of each pattern for actual project reference of particular pattern Changing the face of Concrete



1/46 Rippe Type NWeb Link: www.reckli.de/1_46.htm

[mm]

side elevation

854075 50

5010

995

5000

1/134 RivieraWeb Link: www.reckli.de/1_134.htm

[mm]

side elevation

45

8

Ø25

22

Ø25

985

5000

2/94 OrinocoWeb Link: www.reckli.de/2_94.htm

[mm]

side elevation

7

24

35Ø15 Ø15

1890

4800

Precast Wall Using “1/176 Raba” Pattern

1/176 R’abaWeb Link: www.reckli.de/1_176.htm

[mm]

side elevation

1050

30-120 20-80

1095

4500

NEW

Precast Panels Using “2/75 Kocher” Pattern

Precast Panels Using “2/94 Orinoco” Pattern

PROJECT EXAMPLE

SEE PAGE 41

2/63 WislaWeb Link: www.reckli.de/2_63.htm

[mm]

side elevation

Ø 105 127

3900

7300

2/29 FuldaWeb Link: www.reckli.de/2_29.htm

[mm]

side elevation

Ø 22 33

197

3800 / 7300

7300

/ 38

00






1/42 MadeiraWeb Link: www.reckli.de/1_42.htm

[mm]

side elevation

125Ø 45

12515

1245

6000

“1/42 Madeira” Pattern Used In Tunnel Entrance

1/172 Sinus 27/100Web Link: www.reckli.de/1_172.htm

[mm]

side elevation

37

10

Ø 54 Ø 54 1001000

5000

1/171 Sinus 18/76Web Link: www.reckli.de/1_171.htm

[mm]

side elevation

76Ø 48Ø 48

268

1060

5000

NEW NEW

Insitu-Cast Wall Using “2/175 Friesland” Pattern

2/175 FrieslandWeb Link: www.reckli.de/2_175.htm

[mm]

side elevation

288

30-1051670

3900

NEW

Precast Panels Using “2/63 Wisla” Pattern

Precast Panels Using “2/29 Fulda” Pattern

PROJECT EXAMPLE

SEE PAGE 1

PROJECT EXAMPLE

SEE PAGE 40







Insitu-Cast Wall Using “2/95 Amazonas” Pattern

2/95 AmazonasWeb Link: www.reckli.de/2_95.htm

[mm]

side elevation

7 21

53Ø 32Ø32Fix 1010

4000

Insitu-Cast Wall Using “2/175 Friesland” Pattern

Precast Panels Using “2/95 Amazonas” Pattern

Geometric Patterns

2/327 AurillacWeb Link: www.reckli.de/2_327.htm

[mm]

side elevation

2/340 MiribelWeb Link: www.reckli.de/2_340.htm

side elevation

1/138 AlsaceWeb Link: www.reckli.de/1_138.htm

side elevation

[mm] [mm]

13

187

2080

1130

5000

1712

200 50

1000

2750

7

8

N N N 33N

Niveau = 0, 8, 10, 25

20-130

117529

95

20-130

Precast Panels Using “2/327 Aurillac” Pattern Precast Wall Using “2/340 Miribel” Pattern Precast Panels Using “1/138 Alsace” Pattern


2/109 Oriental 9Web Link: www.reckli.de/2_109.htm

[mm]


[mm]

side elevation


[mm]

side elevation

side elevation

10577

33

198

113180

1375

85104

7356464 64

3567

26

17

3490

1920

21444721140 88

57

177

3075

1380


[mm]

side elevation

214242 21 717

1070

3080


[mm]

side elevation

2232

33

47

47

9

995

995


[mm]

side elevation

51

4993

35

9

1015

1015

Precast Panels Using “2/112 Oriental 12” Pattern

Non-Std Formliner Pattern Used To MakeGRC Panels For This Oriental Temple



Oriental Patterns





2/178 AntislipWeb Link: www.reckli.de/2_178.htm

[mm]

side elevation

2/115 PastillenWeb Link: www.reckli.de/2_115.htm

[mm]

side elevation

8

3

7. 5

3200

7900

420 24

97

1400

2900

9.518 5 10

7300

1980

2/118 Riffel 2-FachWeb Link: www.reckli.de/2_118.htm

[mm]

side elevation

9.5 3.532 9

97

3000

1500

2/117 Riffel 5-FachWeb Link: www.reckli.de/2_117.htm

[mm]

side elevation

7

323

429

9

7500

1480

2/120 RhombusWeb Link: www.reckli.de/2_120.htm

[mm]

side elevation



Anti Slip Patterns


Precast Flooring Using “2/118 Riffel 2-Fach” Pattern

Precast Flooring Using “2/178 Antislip” Pattern Precast Flooring Using “2/115 Pastillen” Pattern Precast Step Treads “2/120 Rhombus” Pattern


2/119 PikesWeb Link: www.reckli.de/2_119.htm

[mm]

side elevation

97

97

2600

2900

Train Platform Edge Using “2/119 Pikes” Pattern



Anti Slip Patterns

Page 36

All patterns on this page are available in 3 weeks

Precast Edging Using “2/119 Pikes” Pattern

2/601 CharenteWeb Link: www.reckli.de/2_601.htm

[mm]

side elevation

2/602 SaôneWeb Link: www.reckli.de/2_602.htm

[mm]

side elevation

2/603 VienneWeb Link: www.reckli.de/2_603.htm

[mm]

side elevation

4 82

8 1012

1

7000

3250

8 11

2111

7000

3250

8

72

10 11

7000

3250

12

4

Graphic Formliners

Non Standard Examples Of Graphic Designed Formliners


Original Photo

Photo Engraved Formliner

Finished Concrete Panel



Photo Engraved Formliners

Page 37

Visit our Website for a full view of these patterns: www.reckli.com

1

Texture / Application: Self production of rubber mould, with Reckli Pur Elastomer A 55

Reference: Beach pattern, North Sea,Cuxhaven

2 3

4 5

RECKLI-Formliner-system for textured concrete

Kugelbake Theatre

1

Texture / Application: 2/87 Ohio special design / insitu

2



General Examples

Page 38


“2-121 Cheyenne” pattern used to create a natural rocklook on earth walls - Albury Wodonga by pass project

“2/337 Miramas” bamboo pattern usedto beautify precast panels in load bearing

position-Orangutan enclosure, Melbourne Zoo

“3/03 Regina” pattern used to create wave/bandon western wall - Footscray police station

“2/49 Saale” pattern used with other non-standard raised patterns “1/43 Corse” pattern used on core wall of lift shaft

“Koru” Maori pattern . Non-standard formliner used to make GRC cladding around internal columns - Auckland Arena, New Zealand

Non Standard Insitu-cast floral pattern noise wall

“1/41 B-Ibiza pattern used in 2 way directional change



General Examples

Page 39




General Examples

Page 40

Formliner Mould Assembly In Precast Factory

1/42 MadeiraSide Joining 2 Formliners

2/136 Bretagne Side Joined 2 Mats

Any Brick Mould Formliner

2/79 Mayenne pattern on new rock wall from concrete to match 800+year old Castle in Dublin

Standard Formliner Using Our2/144 Spessart Pattern

Re-arranged For different Effect

2/41 Mosel pattern used as feature in boundary panel



General Examples

Page 41

Customised 2/27 EMS - Master Mould Formliner Finished Panel On Site

Master Mould

Gypsum Master Mould Formliner Finished Panel

2/94 Orinoco Pattern



G.R.C. (Glass Fibre Reinforced Concrete) Examples

Page 42

RECKLI moulds can beused on:

Acoustic Panels & Walls

Noise Barriers

Block Retaining Walls

Decorative Finishes

Moulds for Exterior Ornaments

Landscape Elements

Decorative Concrete

Retaining Walls Design

RECKLI is a world leader in the design and manufacture of elastic formliners and moulds and liquid rubbers for the production of such formliners and moulds.

Formliners:For attractive surface modulation and shaping of exposed concrete. RECKLI Formliners are used in precasting factories and in cast-in-situ concrete. Since 1968, we have the experience with structured formliners, competence in all questions about textured and exposed concrete and Millions square metres of structured concrete as reference and trusted evidence.

Auxiliary products:Like Demoulding Materials, Formliners Adhesive and Cleanser, Filler and Thickener or cement-bound products supplement our range and offer the user a suitable solution for users own requirements.

Using RECKLI formliners

Formliners come in a range of decorative shapes & textures


Actual rubber mould

Reckli formliners are perfect when you need repetitive & consistent results


Actual rubber mould

2/175 Friesland Formliner

Moulds forGRC tiles

CONCRETE

RECKLI Australia & New Zealand Display Centre: Building 1, 123 Pipe Rd North Laverton Victoria 3026 AustraliaPostal Address: PO Box 120 Sunshine Victoria 3020 Australia Mobile: 0418 176 044 Fax: 03 8361 7186 Email: [email protected] Web: www.reckli.com

National Precast Concrete Association Australia

(Associate Member)

Member


2009 Catalogue



Make Your Own MouldsBalastrades Moulds

Supersedes our previous “2008 Catalogue” and now allows for 14 NEW extra pages and patterns2009 Catalogue

TICK CIRCULATION

For extra copies:please email:

[email protected] or fax: 03 8361 7186

RECKLI are suppliers of Rubber Moulds & Form-Liners for patterns on concrete panels & other concrete elements. RECKLI offers flexible & re-usable mould liners for architectural concrete/GRC units. RECKLI moulds will assist in increasing kerb appeal, enhancing architectural expression & integrate structures with their surroundings.

Reckli OfficesGermany (Head Office)

AndorraAustraliaAustriaBelgiumCanada

China x2Finland x2FranceHong KongIndiaIran

IrelandIsrealItalyMalaysiaNetherlandsNew Zealand

NorwayPolandPortugalRussiaSaudi ArabiaSingapore

South KoreaSpainSwedenTaiwanThailandTurkey

U.A.EU.S.AUK x2

Noise Reduction Wall Formliner Standard Patterns

Liquid rubber: For Make-your-own formliners and mould and pattern making as well as for the surfaces protection. The complex area of application goes form the preservation of monuments and restoration of valuable elements of buildings, as well to the mould making in the porcelain and ceramic industry.

Custom Patterns

CONCRETE

MOULDS

By

Precast Elements Insitu-Cast Elements Stack/Site Cast ElementsGRC - Glass Re-inforced Concrete Prestressed Elements

If Reckli formliners are used as outlined in our application guide, we guarantee 50 re-uses for standard formliners with a prefix 1/xx and 100 re-uses for formliners with a prefix 2/xx.Our support against liability under any proven claims and compensation is limited the value of the purchase price or replacing that portion of defective formliner(s).

Sam Burrone Design 03 9734 1424

concrete national precast concrete ... - moulds for concrete

Documents