complies with ansi/ria standard - pinnaclesystems.com · what happens when the elastomer’s glue...

www.pinnaclesystems.com 1

Complies with ANSI/RIA StandardR15.06-1999, ANSI/B11.19-2003OSHA 1910.217b, CSA andUL 508 Requirements

Designed to EN1760-1, EN954-1 Category 4 Controllers & EN60204-1 for CE certification

Hazardous area presence sensing detection

Cross monitored system

NEMA 6 (IP 67) rated mat system

High-grade vinyl plastisol sealed housing

CustomizedSafetyMatSystemsareourSpecialtyandareavailableinRibbed,Non-SkidorHigh-Temperature/WetEnvironmentSurfaces


Breakthrough technologyprovidesdigital(on/off)switchingforsafetymatapplications.Theadvancedswitchingmechanismprovidesthefollowing:

• safetymatsaredesignedtobemachineinterfacedwithonly controllersfornormallyopenSPST4-wiresafetymats.

• The safetymathasnorigidsteelelectrodesusedintheswitchingmechanismthatcanrustanddent.

• The safetymatcontainsnowiringsolderjointswithinthematassemblythatcoulddegradeorshortout.Wiringsolderjointscanfailunderloadssuchasforktruckorhandcarttraffic.

• flexibleelectrodeslifecycleover5,000,000switchactivations.

• safetymatsprovideincreasedreliabilityandsafetywithlongerproductlife.

• Customizedwireexitpositionsavailablewithnoadditionaltoolingcosts.

• flexibleelectrodesprovideaproductthatisflexibleandwon’tkinkorshortoutlikerigidsteelelectrodeswhenbent.

• The matelectrodesare: Non-Corrosive Flexible Non-Magnetic Anti-Static

• safetymatscanuseACorDCinputpower.

• Largesinglematmanufacturingprocesshelpseliminateadditionalinterconnectpiecesrequiredbyothersandsimplifiesinstallation.

• Dual20’(6.1m)lengthsoftwo-conductor,22gaugemultistrand300VAC(fourconductorstotal),CSA&ULListedwiringpermateasesinstallationtime.

• Fastdeliveryoncustomshapesandsizeswithnoneedforspecialtoolingcosts.

• Multiplezonesinonemathousingavailable.

• Designedspecificallyfortherigorousindustrialenvironment.

• Easysystemtoinstall.

• Novacuumsealtobreakwhichinducesrustandleadstodeadzones.

• Canabsorbpunctures.

• Dualribbedmathousing.

• High-tempweldingmatsavailable

• Non-skidorhightemperature/wetenvironmentmatsavailable.

• Hermeticallysealedsensorsystem(NEMA6,IP67).

• Adaptswelltounevenfactoryfloorinstallations.

• Customengineeredsystemsavailable.

• Largeselectionofsizesandcapabilities.

• Maximumintermittentloadonan matis3000PSI.

• Patentspending.

• Warranty-2years.

Revolutionary Switching Mechanism is Changing the Safety Mat Industry


Questions for the Rigid “Steel Electrode” Safety Mat 1. Howarerustpockets(deadzones)monitoredwithinthematswitchingelectrode?

2. Howmuchcanyoubendasteelmatbeforeitkinksthesteelelectrodeandshortsout(fails)?

3. Howflexibleisthesystemforspecials,uniquesizes,andwireexits?

4. Whathappenswhenaheavyload(forktruck)ridesalongsidearaisedelastomerthatdistortsthesteelandshortsouttheelectrode?

5. Whathappenswhenthesteelusedintheelectrodeelementisn’tperfectlyflat?

6. Doesthesteelelectrodehaveapocketofair(oxygen=rust)betweenthetwosteelelectrodes?

7. Whathappenswhenasteelelectrodematisinstalledonunevenfloors?

8. Doesthesteelelectrodematmanufacturerpullavacuumandinjectaninertgasbetweenthesteelelectrodeswitchassemblytoassurethatnooxygenisexposedtothesteelelectrodetopreventrusting?

(Remember,oxygen=rust,rust=deadzones,anddeadzones=lossofsafety)

9. Whathappenswhenthevacuumsealisbroken?

10. Whathappenswhentheelastomer’sgluereleasesandslidesoutofposition?

11. Howmanyswitchcyclescanbemadeatthesamepointbeforecarbondepositsarecreatedbyarcing?

Facts on the Use of “Steel Electrode” Safety MatsTiredofrigidelectrode(steelorcopper)stylemats?Nowonder,steelelectrodesafetymatsweredesignedinthemid1950’s.Someoftheirdisadvantagesinclude:

• Bendwithsubsequentshortouts,especiallyinthecornersofsteelmats.

• Naturallyrustwhichcreatesdeadzones.

• Havemultipledeadzonesonthematsurfacewhereelastomersareinstalled.

• Cannothandleheavyloads.

• Failatahighrate.

• Arenotflexible.

• Havelimitedsizesavailable.

• Areheavyandawkwardtoinstall.

• Requiremultiplewiringconnectionsburiedinperimetertrim.

• Requirelongleadtimesforspecialsizesandshapes,ifpossibleatall.

• Havelimitedwireexitpositionsavailable.

• Areextremelydifficulttotroubleshootadaisychainedsystem.

• Apuncturedsteelmatimmediatelyshortsoutandwillfailduetothemetalrolloveratthepointofpuncture.

• Continuedswitchinginthesamearea“arcing”createscarbondepositsandpotentiallycreatesadeadzoneandanunsafecondition.

• SteelmatsarenotPSIbasedswitchesbutrather“force”relatedswitching.

• Cannotbeinstalledonunevenfloors.


NSD Mat Layout Procedure 1. Sketchtotalareatobeguarded.

2. Locatedesiredmountingpositionofmatcontroller.

3. Listmatsizesandstylesdesiredtocompletelyguardthehazardouszone.

4. Ifareatoguardistoocomplextodeterminematsizes,submitdrawingtothefactory.

Mat Sizes - Inches/Millimeters

Standard Mat Widths (A)

12”/305mm 48”/1219mm18”/457mm 54”/1372mm24”/610mm 60”/1524mm30”/762mm 66”/1676mm36”/914mm 72”/1829mm42”/1067mm

Standard Mat Lengths (B)

12”/305mm 84”/2134mm18”/457mm 90”/2286mm24”/610mm 96”/2438mm30”/762mm 102”/2591mm36”/914mm 108”/2743mm42”/1067mm 114”/2896mm48”/1219mm 120”/3048mm54”/1372mm 126”/3200mm60”/1524mm 132”/3353mm66”/1676mm 138”/3505mm72”/1829mm 144”/3658mm78”/1981mm

Example Part # NSD - 36 - 96 - Y - R - X - 20 - S

(prefix)

SPECIALS....Theultimatecustomizedmatsystemintheindustry.Thisseriescanprovidecustomizedmats,machineinlays,wireexits,etc.Submitdrawingandrequirementstofactory.

Width12,18,2430,36,4248,54,6066,72

Length12,18,24,30,36,42,48,54,60,66,72,78,84,90,96,102,108,114,120,126,132,138,144

ColorY-YellowB-Black

Mat StyleR-RibSurface

N-Non-SkidSurfaceH-HighTemp.Surface(Excellentforweldsplatter,moltenplastic,diecasting,forgingoperations,andwetenvironments)

Mat WiringSeeoptionsshownright

XEWP

Wire LengthOrderinfeet.

20’(6.1m)suppliedstandard.Specifylongerlengthsifneeded,100’

(30.48m)maximum.

OptionsS-Designatesa

specialcut,contournotch,wireexitor

angleinmat(pleasesubmit

drawing).

N-Non-Skid Surface

Mat Orientation and Wire Exit (Top View)

RibStyleSurfaceDirection

Non-SkidSurface(Thisisagriddesignandisomnidirectional)

2-2conductor20’(6.1m)wireleads,22gauge,CSA&ULlisted

A

B

H-High-temperature/wet environment surfaces

R-Rib Style Surface


Sizing Your Safety Mat SystemHow to Properly Size your NSD Safety Mat System

Thefollowingformulaisadomesticandinternationalguidelinefortheproperpositioningandapplicationofsafetymatsformachineguarding.Thisformulamust be followed for all safetymat applications supplied to theEuropeanCommunity (CE)member nations. CEN is theEuropeanCommittee forStandardization.Finaldraft#prEN999.TheformulaisalsoincorporatedinANSI/RIAStandardR15.06-1999.

Theminimumdistancefromthedangerzoneshallbecalculatedbyusingthegeneralformula:

S=(KxT)+C

S is the safetymatminimumdistance in inches/millimeters in a horizontalplanefromthedangerzonetothedetectingedgeofthesafetymatfurthestfromthedangerzone.

Kisaparameterininches/millimeterspersecondderivedfromdataonapproachspeedsofthebodyorpartsofthebody.K=63”/second(1600mm/second).

Tisthetotalsystemstoppingtimeperformancewhichincludesactivatingthesafetymat, themat controlleroutput signal switchingdevice,and the timerequiredtostopthemachineandremoverisk.

Cisanadditionaldistanceininches/millimeters,basedonintrusiontowardsthedanger zoneprior toactuationof theprotectivesafetymatequipment.C=48”(1219mm).

DimensionsMetal Box Controller

Board Only:Model NSD-TR-BO5”(127mm)x7”(178mm)platewith4holes4.25”(108mm)x6.25”(159mm)oncenter

Controller: Model NSD-TR-01 = 1 Zone

8”(203mm)x6”(152mm)x3.5”(89mm)with4”(102mm)x8.75”(222mm)holes

Model NSD-TR-02 = 2 Zones12”(305mm)x10”(254mm)x5”(127mm)with8”(203mm)x12.75”(324mm)holes

Model NSD-TR-03 & TR-04 = 3 & 4 Zones16”(406mm)x14”(356mm)x6”(152mm)with13”(330mm)x16.75”(425mm)holes

DIN-rail Controller — Model NSD-DR-015.87”(149mm)lengthx4.33”(110mm)widthx2.95”(75mm)height.

DIN-rail Controller with Diagnostics — Model NSD-DR-045.87”(149mm)lengthx4.33”(110mm)widthx2.95”(75mm)height.

DIN-rail enclosure mounting: 35mmDIN-railmountableormountingscrewsoncornersofenclosurerequiringtwocombo-headscrews(3.5mmx0.6mmx14mmor#6x.5).

Ordering ProcedureSpecifycontrollermodelnumberandquantitydesired.

Annex B (informative)

Walking speeds and stride lengths. Thepositioningofequipmentwhich is activatedby a personwalking into the detection zonebysteppingontoapressuresensitivematisaffectedbyspeedofapproachandstridelength.Thewalkingspeedandstridelengthdependonthephysicalandanthropometricdataofthepopulation.

Speed of Approach. Thisstandardassumestheapproachofpersonstowardsthedangerzonewillbeatwalkingspeed.

Stride Length. Availableresearchdatahasshownthe95thpercentileoftwosteps(i.e.,startingandfinishingwiththesamefoot)measuredfromheelcontactatwalkingspeedisapproximately75”(1905mm).Bydividingbytwoandsubtractingthe5thpercentileshoelengththisgivesastridelengthof28”(711mm).Ifitisassumedthatanallowancehas tobemade(forexample,between thedetectionzoneand thestridelengthof2”/50mm),thisgivesaminimumwidthof30”(762mm)forthedetectionzone.


NSD Mat Wiring Options

X - (standard)2-2conductorwiresexitingatcenterofmatonBdimension.

E - 2 - 2 conductor wiresex i t ing at opposi tec o r n e r s o n Bdimension.

W - 4 conductor cable outof the top left corner(homerunwiringtomatcontroller).

P - 4conductorplugoutofthe upper left corner;20’(6m)plugextensionsupp l ied s tandard .Ha rdw i r ed t o ma tcontroller.

Metric Conversions3’ = .91meters6’ = 1.83meters12’ = 3.66meters

NSD Safety Mat LabelProvides immediate safetymat system information

requiredbyinternationalguardingstandards.Thelabelis locatedon themat surface. Bar coding is suppliedstandard to ease in receiving and inventory control.Customizedlabelsareavailable.

[email protected]

Phone: 800-569-7697Fax: 412-262-4055

Suitable for 35 Kg useResponse Time: 35 msec

Serial # 1111111111111111Part # NSD-72-144-Y-R-X-20

Maximum Mat Input: 24V (AC or DC) @ 75mA

(actualsize)

NSD Single Mat CapabilitySave timeand installationcostswith singlepiecemat

installations.Helpeliminateorreducedaisychainwiringpracticesrequiredbycompetitivesystems.

Thesizesshownaretypicalsinglepiecematinstallationsthat illustrate themanufacturing versatility of the SafetyMatSystem.

• Thewiringexitpositionscanbelocatedanywhereonthematperimeter.

• Thematsizesshowncaneasilybealteredtofulfillyourspecificprojectneeds.

• Notoolingfeesforspecialmatdesigns.


Perimeter Trim for NSD MatsPerimeter Trim (Part #M001) is used for anchoring

the outside perimeter of the safetymat assembly to thefloorandtorunthematwiringbacktoalocationnearthemat controller. The uniquewire raceway is built into theperimeter trimand issuppliedstandardwith all Part #M001orders.Theperimetertrimadds2.5”(64mm)tomatdimensionperedge.

Ordering Procedure: Specifyl inear feet or dimensionsfollowedbyoneofthefollowing:

TK:(pictureframetrimkit)M001:(bulk)M001-M:(bulk/machined)CustomTrim Kit: (consult

factory)

Example: Part#2442TK.Thisexampleisa24”x42”matwitha24”x42”pictureframetrimkit;totalareais29”x47”.

Active Coupler (Part #M003D) is usedwhenever thematsareplacedsidetosideorendtoside.Thiswillactivatethe“ActiveEdging™”featurewhichwilleliminatedeadzonesbetweenmats.Theactivecoupleradds.25”(6mm)tomatsystem’soveralldimension.

Ordering Procedure: SpecifyPartNumberandtotallengthrequiredinfeet.

Built-in Wire Raceway (Part #M002)

Thisinnovativedesignconceptprovidesexcellentwiringprotectionforyoursafetymatsystem.Thedesignprovidesanelevatedoffthefloorwireracewaytoprotectthewiringand connections from fluids and causticmaterials onthefloor. Italsoprovidesawiringharnesstoprotect thematwiresfrombeingpinchedby improperperimetertriminstallationscommonlyfoundintheindustry.

Safetymatsarerequiredbylawtobe“fixed”inpositionformachineguardingapplications.

Chemical ResistanceThemathousinghasexcellentresistancetoacids,alkalies,

andsalts.Hotacidsandalkalies,aswellasconcentratedoxidizingandorganicacids,haveadeleteriousaffectoverprolongedexposure.

Mat Chemical Resistance

Water E AceticAcid FEthylAlcohol E Gasoline FSodiumChloride E ASTM1Oil FBleach E Benzene PHydrochloricAcid FtoE Aceton PSulfuricAcid FtoE Trichlorethylene PtoFNitricAcid FtoE

Key:E=Excellent;F=Fair;P=Poor

Mat Wiring: Dual20’(6.1m)2conductor,22gauge(wiringstylesXandE)and24gauge(wiringstylesWandP),multistrandwires.CSA&ULListed.

Mat Cable Diameter: .18”(5mm)

Mat Housing: .25”(6mm)topandbottommathousing,crossdrainbuilt-inonmatbottom,hermeticallysealed,NEMA6IP(67)rated.Specialmathousingsavailable,consultfactory.

Perimeter Trim:Part#M001High-gradealuminum#6063-T5

Active Coupler: Part#M003DHigh-gradealuminum#6063-T5

Wire Raceway: Part#M002High-strengthPVC(black)

Mat Temperature Rating: -150Cto550C/40Fto1300F

Maximum Mat Input: 24V(ACorDC)@75mA

Recessed AreaFor 1” (25mm)

Colored Safety Marking

Perimeter TrimPart #M001

Aluminum Active CouplerPart #M003D

MAT

Typical Cross SectionView of Mat Assembly

Built-in Wire RacewayPart#M002

Simple in-house tests for you to try!!!

1. Staborpuncturewithnails,icepick,etc.approximatelytentimesinvariousareasonthematsensingsurface.

2. Bendthematcornersandseewhathappens.

3. Placeonunevenfloorsandcompare.

NSD vs. Steel Electrode Durability Test


System OverviewThe SafetyMatSystem

controllerscontaintwoindependentcontrolcircuitswhichallowforshutdownduetoanysinglefailureinoneofthecontrolcircuits.TheN.O.outputcircuitiscontrolledbytwocaptivecontactrelaysinserieswhicharebothmonitored.Ifthecontactinonerelayshouldstickclosed(i.e.,contactweld),theotherrelaywillshutdownandtheLEDwillindicatethefault;ifthecontactonthebadrelayopensbackup,youmustresetthepowertoclearthefault.Thisrelaycontactmonitoringprovidesahighdegreeofusersafety.

Circuit DescriptionAlowvoltage(24VACor24VDC)

signalissentouttothesafetymat(s)throughtwowires.Twospecialoptically-isolateddiverseredundantcircuitslookatthesignalscomingbackfromthemat(s)detectingthepresenceofproperpositiveandnegativevoltage(AC)levelsandoutputtheirsignalstoredundantmissingpulsedetectors.Ifthevoltagecomingbackistoohighorlow,themissingpulsedetectorswilldropoutandde-energizetherelaycircuit.IfthevoltagecomingbackisnotAC(missingeitherpositiveornegativepeaks),thenthesignalgoingtothemissingpulsedetectorwilldisappearwhichwill,inturn,dropoutandde-energizetherelaycircuit.

Redundantrelaypositiondetectorswatchforarelaycontactstuckinthewrongposition.Thecircuitswilllockouttheresetfeatureofthe controlunitifarelaycontactisclosedwhenitshouldbeopen.

Eachrelayhasitsowndrivercircuittocompletetheredundancyofthecircuits.

Specifications Enclosure: NEMA12,13,IP54

Input Power: 120VAC+/-10%@3watts 50-60Hzfused

Category/Type: 4

Relay Style: Monitoredforce-guidedcaptivecontact safetyrelays

Relay Configuration: 2N.O.SafetyRelays(closedwhen circuitactivated) 1Aux.OutputN.O.orN.C

Safety Relay Rating: 4A@220VAC

Reset Provisions: ManualorAutomatic

Controller Response Time: 15ms

Self-Checking Intervals: Every20ms

Number of Isolated Zones: 1to13(customerspecified)

Maximum Number of Mats: 20withdaisychainwiring

External Reset Provision: Greenpushbutton

Indicators:Internal (on board): YellowLED=+5VDCpowersupply RedLED=Normallydim,brighter whenmatissteppedon.Cutwire detectedwhennotlit. GreenLED=Relaycontactdetected closedwhenitshouldhavebeenopen whennotlit.Mustresetpowertoclear.

External: RedLED=1orbothrelaysare de-energized. GreenLED=Allrelaysareenergized.

Diagnostic Message Display: N/ADeviceNet: N/AWarranty: 2years

Model NSD-TR-01Metal Box Controller

Safety Mat Controllers


Remote Status Display (RSD) Optional for DIN-rail Controller NSD-DR-04

TheRSD(frontpanelshownbelow)maybeusedinconjunctionwiththeNSD-DR-04DIN-railController.TheRSDprovidesthemachineoperatorandfrontlinesupervisorimmediatesystemstatusanddiagnosticswhentheDIN-railControllerismountedinsidethemachinecontrolpanel.

Remote Status Display components:

• Red/Greenindicatorlights • Diagnosticscrollingmessage

displaywith5’(1.52m)ofconnectorcable

• Zoneresetbutton

Thecomponentsaremountedonasteelplateandaredesignedtobeexteriorpanelmounted.TheRSDoptionenhancessafetyandisatimesaveratmachineset-upandwhenmaintenancediagnosticsarerequired.

Ordering Procedure: AddsuffixRSDtocontrollerpartnumber.

Example:NSD-DR-04-RSD.

RemoteStatusDisplayRequires:

PanelCutout:3”(76mm)x3”(76mm)

MountingHoleDimensions:3.7”(94mm)x3.7”(94mm)

CentertoCenter

Model NSD-DR-01DIN-rail Controller

Model NSD-DR-04DIN-rail Controller (with Diagnostics Message Display)

NEMA1,IP32

24VDC+/-20%@7watts

4Monitoredforce-guidedcaptivecon-tactsafetyrelays

2N.O.SafetyRelays(closedwhencircuitactivated)

1AuxOutputN.O.orN.C.1FaultRelayN.O.

4A@220VAC

ManualorAutomatic

19mspermatinputused

Every20ms

1percontroller

4withhomerunwiring20withdaisychainwiring

Greenpushbutton

RedLED=+12VDCGreenLED=+20VDCYellowLED=+5VDCGreenLEDs=oneforeachrelay(4total)

RedLED=1orbothrelaysarede-energized.GreenLED=Allrelaysareenergized.YellowLEDs=1foreachmatstatus(4total)Built-indiagnosticmessagedisplayAddsuffixDNtoModel#2years

NEMA1,IP32

24VDC+/-20%@7watts

4

Monitoredforce-guidedcaptivecon-tactsafetyrelays

2N.O.SafetyRelays(closedwhencircuitactivated)1AuxOutputN.O.orN.C

4A@220VAC

ManualorAutomatic

19ms

Every20ms

1percontroller

20withdaisychainwiring

Greenpushbutton

GreenLED(s)=nexttoeachrelay(3)RedLED=+12VYellowLED=+5VGreenLED=-5V

RedLED=1orbothrelaysarede-energized.GreenLED=Allrelaysareenergized.YellowLEDs=2toshowon/offmat.GreenLED=Relayfaultifitturnsoff.

N/AN/A2years


Safety Mat Controller ModulesPleaseChooseInputPowerof24VDCor115to230VAC.

BothModulesarecomplianttoOSHA&ANSIStandards-ENISO13849-1EN62061EN81-1EN50156-1

Model Number NSD-3580 NSD-3590

Part Number 32-105 32-106

Input Power 24VDC 115to230VAC

Power Consumption 4VA 1.6W

Safety Category ComplianttoOSHAandANSIStandards.Category4(EN954)anduptoPLe

ENISO13849-1.

ComplianttoOSHAandANSIStandards.Category4(EN954)anduptoPLe

ENISO13849-1.

Cross Circuit Monitoring Yes Yes

Housing Rating (plastic) IP40 IP40

Temperature Range 13°Fto149°F(-25°Cto65°C)

13°Fto149°F(-25°Cto65°C)

Pluggable Screw Terminals at .5 Nm Torque Yes Yes

Safety Category Per EN-954-1 Category4 Category4

Performance level acc. to EN ISO 13849-1 e e

Automatic or Manual Reset Yes Yes

Safety Outputs at 6A, 22.5V 3 3

Auxiliary Output at 2A 1 1

Release/Response Time 20ms 20ms

Weight of Module 7.05oz.(.2kg) 7.05oz.(.2kg)

Dimensions Depth 4.48”(114mm) 4.48”(114mm) Width .88”(22.5mm) .88”(22.5mm) Height 3.79”(96.5mm) 3.79”(96.5mm)

StandardsOSHAandANSIStandards:ENISO13849-1EN62061

EN81-1EN50156-1

OSHAandANSIStandards:ENISO13849-1EN62061EN81-1EN

50156-1

24 VDC 115 TO 230 VAC


STTS Monitored at the Highest level of level of a normally monitoring available Open SPST four-wire

Dead Zones None/100%Active None/100%Active

Active Edging Yes YesPlacematsside-to-sideorend-to-endbyslidinganactivecouplerinplace;eliminatesthresholds,close-out,andunitingstrips.Preventsdeadzones.

Customized Activation Thresholds Available Yes Yes

Customized Mat Sizes Available Yes Yes

Types of Controllers Available:MetalBoxController Yes YesDIN-railController Yes Yes

Multi-Lingual Controller with Built-In Diagnostic Message Display Yes Yes

Maximum Intermittent Load on Mat 3000PSI 3000PSI

Meets or Exceeds allcurrentstandardsofOSHA, Yes YesANSI, CSA,andRIA,includingtheEuropean1760-1StandardusedforCE acceptance

Category 4 Safety System Controller PulsedMatMonitoring Yes

Category 3 Safety System Yes Yes

Utilizes the Patented STTS Sensor Technology Yes No

Designed Specifically for the Rigorous Industrial Environment Yes Yes

“Homerun Plug Connector or Wire Capable” Yes Yes

Easy System to Install/Troubleshoot Yes Yes

Welding Safety Mats Available Yes Yes

No Steel Components that Rust or Deform None None

Can Absorb Punctures Yes Yes

Mat Provides Arc-Free Switching Yes Yes

Dual Ribbed Mat Housing Yes Yes

Ribbed, Non-Skid, or High-Temperature/Wet Environment Surfaces Yes Yes

Hermetically Sealed Sensor System Yes Yes

The Mat Electrodes are: Yes YesNon-CorrosiveFlexibleNon-MagneticAnti-Static

Adapts Well to Uneven Factory Floors Yes Yes

Custom Engineered Sensor Systems Available Yes Yes

Computer Interfaced SmartFloors™ and SmartMats™ Available Yes No

Pinnacle Safety MatsWeofferthelargestselectionofsafetymatstylesandsizesavailableintheworld.

Customizedshapesandsizesareourspecialty.

www.pinnaclesystems.com 12AdditionalproductstoachieveyourTotal Safety Solution!!!

-SafetyLightCurtains(AllTypesandStyles)-UniversalSafetyControllerHUB/SafetyPLC-SafetyMatSystemsandControls -AreaGuardingSystems -NSDSafetyMatSystems -STTSSafetyMatSystems -DirectionofTravelMats -High-TempWeldingMats-ErgonomicPalmButtons -UltraTouchPalmButtons-SafetyInterlockSwitches(includingexplosionproof)-Customized“controlreliable”controlsfordualsolenoidactivatedpneumaticandhydraulicvalveapplications-FencingwithInterlocks-E-StopButtons-StackLights

-EnergyIsolationandSinglePointLockoutSystems-PlantSurveys,RiskAssessment&InstallationServices-CustomizedControlPanels;StainlessSteelenclosuresavailableforallproductsPunch Press / Metal Stamping Industry -ResolverorRotaryCamBasedClutch/Brake Controls-OSHA/ANSICompliant -PunchPressAutomationControllers -Time-BasedBrakeMonitors -ProgrammableLimitSwitches -DieProtection&TonnageMonitoringSystems -ServoFeedInterfacesPress Brake Guarding and Controls -PressBrakeGuardingforMechanical,AirClutch andHydraulicPressBrakes -PressBrakeControlSystems

Sales and Marketing OfficeP.O.Box100088Pittsburgh,PA15233

TollFree: (800)569-7697Phone: (412)262-3950Fax: (412)262-4055

[email protected]

Manufacturing and Service Center3715SwensonAvenueSaintCharles,IL60174Phone: (630)443-9320Fax: (630)443-9346

[email protected]

Wehavedesignedourequipmenttotheveryhighestperformanceandsafetystandardsknowntothecurrenttechnologicalstateoftheart,asevidencedbyourU.S.A.andforeignpatentsissuedandpending.However,theinstallation,usage,andsuitability,andfitnessofourequipmentforanypurpose,knownorunknown,isinterdependentupontheperfor-manceofotherequipmentnotmanufactured,installed,securedormaintainedbyPinnacleSystems,Inc.

Wecannotanddonotacceptresponsibilityforanyoverallsystemperformancewhenfactorssuchasthese,arebeyondourcontrol.

www.pinnaclesystems.com

complies with ansi/ria standard - pinnaclesystems.com · what happens when the elastomer’s glue...

Documents