complete tank fabrication
DESCRIPTION
Equipos para construcción de tanques soldadosTRANSCRIPT
-
CUTTING, POSITIONING & WELDING EQUIPMENT
KOIKE ARONSON RANSOME
Koike knows Tanks from Top to Bottom
-
KOIKE ARONSON, INC. / RANSOME
AGWSeriesAGW-I / AGW-IIAutomatic Girth Welders
Koike Aronson / Ransomes AGW Automatic Girth Welder is anautomatic system that speeds up construction of field-erected storagetanks. It straddles the shell plates riding on adjustable flanged wheelsat operator controlled speeds of 4 to 105 IPM (.102.67 M/min). It canhandle plates as thick as 2 inches and tank diameters from 15 feet andup. Available as dual or single sided machines. Each is equipped withwelding heads, controls, flux support belts and recovery units so that 3and 9 oclock welds can be made simultaneously. The Lincoln NA-3solid state control and welding head fitted with nozzles, wire feed rolls,straighteners and 50 Lbs. (22.7Kg) wire reels for either single or Twin-arc wire are standard. Submerged arc flux belt mechanism ensuresretention of the flux at the joint, and efficient recycling of flux. Openarc models are available upon request.
Effectively cuts welding timeup to 40%
Adjustable frame for plates 6ftto 10ft tall (1.8m-3m)
Unlimited tank diametersdown to 20 in diameter
High / low rapid travel selectcontrols
Self propelled at speeds from4 to 105 IPM
Plates up to 2 thick
Single and Double sidedoperation
Features
Adjustable for plates from 6 to 10 tall
-
Koike Aronson Inc.P.O. Box 307, Arcade, New York 14009
Phone (585) 492-2400 Fax (585) 457-3517www.koike.com
SpecificationsAutomatic Girth Welders
Adjustable tubular frame for plates 6ft to 10ft tall (1.8m-3.05m)Min. 20ft (6.1m) to an Unlimited tank diameter rangeTravel speeds 4-105 ipm (.10-2.67 m/min)Speed, direction and rapid travel select controls (Master side)
Average welding speed is approximately 30 ipm (.762 m/min)with a deposition rate of 11# per hour. (per side)
Includes
Operator's Platform with seatLincoln NA-3 Wire Feeder and ControlLincoln DC-600 or DC-1000 Power SourceVertical AdjusterHorizontal AdjusterFlux Belt AssemblyFlux Recirculating SystemLincoln Tiny Twin Wire KitPre-Heat TorchService Skid with DisconnectTropicalized Controls.Weather Curtains200 feet of Control Cable AssemblyLoading Safety WheelsOperator Communication System (AGW-II Only)Operators ManualTool Kit
NA-5 Controls Available CE-Mark Compliant Models Available Custom Engineered Models Available
Notes:
-
KOIKE ARONSON, INC. / RANSOME
Weighs less than1,000 Lbs. (450 Kg.)w/o canvas
Koike Aronson / Ransomes AGW-LW Light Weight Automatic GirthWelder is an automatic system that speeds up construction of thinwalled field-erected storage tanks. It straddles the shell platesriding on adjustable flanged wheels at operator controlled speeds of4 to 105 IPM (.102.67 M/min). It can handle plates as thin as3/16 inches and tank diameters down to 12. Equipped with weldinghead, controls, flux support belts and recovery unit for 3 oclockwelding. Standard Lincoln controls and welding head, straightenerand 50 Lbs. (22.7Kg) wire reel included. The adjustable submergedarc flux belt mechanism ensures retention of the flux at the joint,and efficient recycling of flux.
40% lighter than standardAGW-I
Effectively cuts welding timeup to 40%
Adjustable frame for plates 6ftto 10ft tall (1.8m-3m)
12 Tank diameters and up
High/low rapid travel selectcontrols
Self propelled at speeds from4 to 105 IPM
Plates down to 3/16 thick
AGWSeriesAGW-LW Light WeightAutomatic Girth Welders
Thin Walled, Small Diameter
Features
-
Koike Aronson Inc.P.O. Box 307, Arcade, New York 14009
Phone (585) 492-2400 Fax (585) 457-3517www.koike.com
SpecificationsLW-Automatic Girth Welders
Adjustable tubular frame for plates 6ft to 10ft tall (1.8m-3.05m)Min. 12ft (5.6m) to an Unlimited tank diameter rangeTravel speeds 4-105 ipm (.10-2.67 m/min)Speed, direction and rapid travel select controls
Average welding speed is approximately 30 ipm (.762 m/min)with a deposition rate of 11# per hour
Includes
Operator's Platform with seatLincoln NA-3 Wire Feeder and ControlLincoln DC-600 or DC-1000 Power SourceVertical AdjusterHorizontal AdjusterAdjustable Flux Belt AssemblyFlux Recirculating SystemPre-Heat TorchService Skid with DisconnectTropicalized Controls.Weather Curtains and Roof200 feet of Control Cable AssemblyLoading Safety WheelsOperators ManualTool Kit
NA-5 Controls Available AC/DC Power Wave Available Open Arc models Available Custom Engineered Models Available Stainless Wheels Kits Available
Notes:
-
KOIKE ARONSON, INC. / RANSOME
The Koike Aronson/Ransome single pass Vertical-Up welder (VUP)can complete 10-12 vertical seams on a field erected storage tank with8 tall x 1 thick seams in one work shift. X-Ray quality welds with oneoperator and one machine. The frame consists of a vertical column mounted on a manual oroptional powered carriage and roller assembly that rides on the topedge of the tank shell.
Lift controls include up/down switch, high/low speedpotentiometers and rapid speed selector that control a variable speedmotor that is electronically integrated with the welding control, whichautomatically adjusts speed to maintain the optimum nozzle to weldpuddle relationship.
A Lincoln NA-3 head and control is supplied with two K-176Nozzles for welding with either 3/32 or .120 diameter NR-431Innershield wire. The NA-3 head is mounted on a free moving slideproviding manual lateral adjustment. An air operated bracket supportsan articulated copper shoe assembly.
X-Ray Quality Welds
Single Pass Operation
Adjustable frame for plates 6ftto 10ft tall (1.8m-3m)
Unlimited tank diameters
Optional Powered Oscillatorfor 1-1/4 to 3 plate
Optional Powered LateralTravel
Features
VUPSeriesVERTICAL-UP WELDER (VUP)
10 to 12 Vertical Tank Seams in One ShiftWith Deposition Rates of 48 Lbs./hr
-
Koike Aronson Inc.P.O. Box 307, Arcade, New York 14009
Phone (585) 492-2400 Fax (585) 457-3517www.koike.com
SpecificationsVertical-Up Welders
Includes
Lincoln NA-3 Wire Feeder and ControlLincolnDC-1000 Power SourceVertical Support ColumnFront and Rear Sliding ShoeWater RecirculatorPower SkidLifting BaleInput Power DisconnectTropicalized Controls.200 feet of Control Cable AssemblyManual or Powered Lateral TravelOperators ManualTool Kit
Multi-Pass MIG Models Available Portable Track Guided Models Available Custom Engineered Models Available
Notes:
Koike Aronson / Ransomessingle pass Vertical-Up weldingsystem for field constructionwelds 20 times faster thanconventional stick electrodes.
No joint preparation is required,square butt design saves constructiontime and money.
Adjustable for plates from 6 to 10 tall
Single-Pass Process for Mild Steel
-
KOIKE ARONSON, INC. / RANSOME
The VUP-MIG is designed for an open arc welding processwith a gas shield. b i-directional welding travel, w/controlledSpeed, Self supporting, hangs directly on tank shell. Allcomponents integrated onto the lift column. The columnwill support all welding equipment, including power source andgas cylinder.
Ideal for nickel or stainlessplates
Adjustable frame for plates6ft to 10ft tall (1.8m-3m)
Unlimited tank diameters
Up/down, high/low rapidtravel select controls
Rack and pinion drive forpositive vertical motion
Manual or optionalpowered lateral travel formoving from joint to joint
Adjustable Frame for Plates 6 to 10
VUPSeriesVERTICAL-UP MIG WELDER(VUP-MIG)
Features
-
Koike Aronson Inc.P.O. Box 307, Arcade, New York 14009
Phone (585) 492-2400 Fax (585) 457-3517www.koike.com
SpecificationsVertical-Up Welders
Includes
Vertical support column.Welding head support table with support rollersCross slide to provide in-out, right left and heightadjustment (Manual)Torch weaver (Oscillator) (KSK WU-1 Weaver)Operators controlsPower source platform mountGas cylinder mountLifting bale.230/380/460V - 3PH 50/60HZ.Manual or powered lateral travelOperators manualTool kit
Optional removable operator platform (Not Shown)
Recommended Welding EquipmentSupplied and integrated by Koike,or Customer SuppliedK-1728-4 V350-Pro Power SourceK-1559-3 LN-10 Wire Feeder w Wire Reel and CoverKP-1505-045 Drive RollsWork Cable w/ Ground Clamp400 Amp Mechanized Torch,Gas Connection Kit w/ gas Regulator
Single Pass Verti-Shield Models Available Portable Track Guided Models Available Custom Engineered Models Available
Notes:
Koike WU-1 Weaver Control
-
KOIKE ARONSON, INC. / RANSOME
Operator access to both horizontal &vertical seams without scaffolding
Koike Aronson / Ransomes Shell Buggy is the ideal solutionfor manual operations during tank construction. Supported offthe top shell of the tank, the compact work platform provides theoperator access to both horizontal and vertical seams for up to10 plates. Used for preparation, cleaning or repair without theneed for scaffolding. Fold down steps or power elevationprovide the operator with a full reach of the entire vertical seam.Powered and manual traverse options are available, with largelifting eyes for loading and unloading on/off the tank shell.Flanged wheels and safety fingers allow for use on up to 1 thickmaterial.
Up to 10 plates
300 Lbs. (112Kg.) weightcapacity
Tank diameters from 15 and up
Plate thicknesses up to 1
Manual or powered horizontaltravel
Manual or powered elevation
26 x 50 work platform area
Manual pulley drive fortraversing and fold down
steps for elevationshown
Optional Powered traverse drive
OPTIONSSHELL BUGGYManual or Powered Travel, andPower Elevating options available
-
Koike Aronson Inc.P.O. Box 307, Arcade, New York 14009
Phone (585) 492-2400 Fax (585) 457-3517www.koike.com
Used for both wired andengine driven power sources
Skids can be attached directly toVUP or AGW, reducing cable lengthand wind-up problems. Configuredfor any power source and supportequipment required for machine.Rotary grounds attached to wheelaxles provide constant ground currentconduction.
Highly Productive Welding from a Compact MachineLight, compact, 4WD, magnetic force traction and a low center
of gravity allows this series of machines to achieve the highestpulling power and stability in the marketplace today. Utilizing astrong magnet, vertical and horizontal fillet welding is possible withthe standard unit. The Stitch Welding and Twin Torch Welding unitscome with multiple options to cover wide range of welding needs.
WEL-HANDY MULTIMULTI-PURPOSE AUTOMATIC WELDING CARRIAGE
Sub-Arc and MIG compatible Optional WU-1 oscillating weaver option
available
TOW BEHIND POWER SKIDS
OPTIONS
-
KOIKE ARONSON, INC. / RANSOME635 West Main Street
P.O. Box 307,Arcade, New York 14009Phone (585) 492-2400
Fax (585) 457-3517Toll Free: 800-252-5232
www.koike.com
Contact Koike Aronsons World Wide Positioner Sales:1-585-492-2400 x 480
CUTTING, POSITIONING & WELDING EQUIPMENT
CATALOG: TANK FABRICATION 12/10, REV 1