company profile - confindustria · process engineering hours 80.000 electrical engineering hours...
TRANSCRIPT
www.seingim.it
COMPANY PROFILE
Index
SEINGIM's Method ......................................................................................................................... 5
The Art of Engineering ..................................................................................................................6
Operational Headquarters ............................................................................................................6
Institutional profile ........................................................................................................................7
Integrated management system ...................................................................................................7
Organizational chart ......................................................................................................................8
Technical capabilities ....................................................................................................................8
SEINGIM’s sectors .........................................................................................................................9
Chemical, Petrochemical, Pharmaceutical ...............................................................................10
Oil&Gas .....................................................................................................................................12
Buildings ...................................................................................................................................14
Infrastructures ...........................................................................................................................18
Energy .......................................................................................................................................20
Industrial research ....................................................................................................................24
Services offered by SEINGIM .....................................................................................................27
Engineering ...............................................................................................................................28
Management .............................................................................................................................34
Software ........................................................................................................................................37
Partners ........................................................................................................................................38
AVAILABLE 365 DAYS A YEAR
5
SEINGIM’s Method
Over the years, we have developed a structured and participatory method, aimed at generating an added value in the satisfaction of our Customers’ needs and desires.
Fabio Marabese - Chairman and Board President SEINGIM GLOBAL SERVICE S.r.l.
WE FACE PROJECTS IN MULTIDISCIPLINARY WAY
OPERATIONAL HEADQUARTERS ON THROUGHOUT THE COUNTRY
CONTINUOUS TRAINING FOR EVERY EMPLOYEE
PROJECTS DEVELOPED WITH OUR OWN STAFF
USE OF BIM (BUILDING INFORMATION MODELING)
RAPID RESPONSES
INITIATIVE AND CONCRETENESS
RELIABILITY IN TIME OF DELIVERY
SEINGIM’s Method
INTEGRITY AND TRANSPARENCY
CERTIFIED PERSONAL FOR RELIEFS IN FIELD
6
In the conception and in the imagination of SEINGIM, engineering is a key tool, which combines at the same time the quality of life, progress, efficiency and the constant search for innovative solutions. We are people, citizens, entrepreneurs, artisans, professionals, public administrators, and we all need in our realities of having a qualified society of professional engineers, always able to solve the various issues related to the different requests. It is in the DNA of SEINGIM to put at the service of all people strategy, culture and professionalism.
The art of Engineering
COOPERATION QUALITY AND INNOVATION
TEAMWORK ENVIRONMENT
Operational Headquarters
– Viale Duca d’Aosta, 67/6 30022 CEGGIA (VE)
– Via Venezia, 90/A 35131 PADOVA
– Via Federico Confalonieri, 38 20124 MILANO
– Via Giuseppe Filippini, 1 61032 FANO (PU)
– Marie Curie Straße, 17 39100 BOLZANO
– Via Giuseppe Aiana, 12 09121 - Elmas - CAGLIARI
– Via Enrico Fermi, 2749 21027 ISPRA (VA)
– Via Barnaba Oriani, 103 00197 ROMA
Fano
Padova
Ceggia
BolzanoMilano
Roma
Cagliari
Ispra
7
In the strategic vision to steadily improve ourselves, trying to reach the excellence, SEINGIM GLOBAL SERVICE S.r.l. is engaged to update and integrate the operational standards of the offered services. In particular, in order to satisfy Customer's satisfaction, we cured all the aspects that allow the achievement of an Integrated management system for QUALITY, HEALTH/SAFETY, ENVIRONMENT and ENERGY. The certifications UNI EN ISO 9001:2015, BS OHSAS 18001:2007, UNI EN ISO 14001:2015, UNI CEI EN ISO 50001:2011 attest the effective realization of this Integrated Management System and provide the incitement for our continuous improvement to the customer service.
Institutional profile
Integrated Management System
NameSEINGIM GLOBAL SERVICE S.r.l.
Establishment 27/04/1999
Legal Headquarters Vicolo degli Olmi, 57 30022 Ceggia (VE)
Registration to Companies' Registryn. 32264/99
R.E.A. VE – 284489
V.A.T.03133300271
Insurance
Lloyd's
Annual Turnover (included Seingim sas e Studio Marabese)2017 – € 5.470.000,00
QualityUNI EN ISO 9001:2015Cert. n. 6074 by Certiquality S.r.l
Health and Safety BS OHSAS 18001:2007Cert. n. 22514 by Certiquality S.r.l
Environment UNI EN ISO 14001:2015Cert. n. 25065 by Certiquality S.r.l
Energy UNI CEI EN ISO 50001:2011Cert. n. 26487 by Certiquality S.r.l
8
2019 Technical capabilities
The strength of SEINGIM is in the care of human resources in the integration, in trainings and in the relations between workers. For this, we can achieve exceptional results in terms of production, with a united and motivated team, able to share ideas and objectives, working side by side in each project.
Organizational chart Board of Directors
Strategic Direction
Commercial Direction Financial Direction Marketing Office
General Services
InstrumentationAutomationTelecomm.EngineeringDepartment
Mechanical and PipingEngineeringDepartment
Civil - Structural
EngineeringDepartment
Electrical Engineering Department
Process Engineering Department
Strategic Development Committee
AuditingLegal Office
Ext. Relationship
Health & Safety Responsible
Chief Executive Officer
General Director
Commercial DptBuildings/Infrastr.
Commercial DptIndustrial/Energy
Integrated Management
System Manager
President
Technical Direction Industrial Accounting
Human Resources Management
Administrative Direction
22.000PROCESS
ENGINEERING HOURS
80.000ELECTRICAL
ENGINEERING HOURS
70.000INSTRUMENTATION, AUTOMATION AND
TELECOMMUNICATION ENGINEERING HOURS
90.000MECHANICAL AND PIPING
ENGINEERING HOURS (THERMOTECHNICS
AND HVAC, MACHINERY & PACKAGE, STATIC
EQUIPMENT)
38.000CIVIL AND
STRUCTURAL ENGINEERING HOURS
20.000PROJECT
MANAGEMENTHOURS
320.000TOTAL HOURS
YEAR 2019
PM 2
PM ...
PM 1
PM 3
Planning and Order Management
Chemical, Petrochemical, Pharmaceutical
SEINGIM’S SECTORS
Oil & Gas
Buildings
Infrastructures
Energy
Industrial research
10
Chemical, Petrochemical, Pharmaceutical
SECTORS
Major clients:
WASTE WATER TREATMENT PLANTS
PHARMACEUTICAL PLANTS
BIOCHEMICAL PLANTS
PETROCHEMICAL PLANTS
PROCESS PLANTS
This sector deals with:
ABBALLNEXAMBIENTE SCAMEC FOSTER WHEELERARKEMAARTENIUS ATZWANGERCABOT
CAFFARO INDUSTRIECASALE SACS IMPIANTICYTECDECALENI SYNDIAL FINCANTIERIGALENTIS
HALO INDUSTRYHTC BIO INNOVATIONIMPRESA MARCATOKEMIRA ITALYMAEMATER BIOTECHMONTEFIBRE NOVAMONT
NOVELLO GROUPORV MANUFACTURINGRECKITT BENCKISERSAPIOSELENISSIAD
11
12
Oil & Gas
SECTORS
This sector deals with:
OFFSHORE OIL PLATFORMS ONSHORE OIL PLANTS
COMPRESSION GAS STATIONSNATURAL GAS STORAGE
OIL REFINERIES
Major clients:ABBAQUAENGINEERINGBASIS ENGINEERINGCS IMPIANTI EDIPOWEREDISONENI
ENI PROGETTIENI VERSALISMARISP.A.S.PAPOLAPIETRO FIORENTINIRENCO
SAIPEMSIMETECHFEMTECNOMARETHERMOENGINEERINGVALVITALIAVENICE LNG
14
Buildings
SECTORS
RESIDENTIAL TOWERS
INSTRUCTION
OFFICES COMMERCIAL
MULTIFUNCTIONAL
This sector deals with:
Major clients:ACQUA SAN BENEDETTOAEROPORTO DI VENEZIA AEROPORTO DI BERGAMO AEROPORTO DI BOLOGNAAIR CHEFANASANTONIO SV - AGRIVILLAGE
AREA ENGINEERINGAUCHANCERVETCARRON COSTRUZIONIDECATHLONDIESELE.R.P.A.
F&M INGEGNERIAFENDIFURLAGEOXGRUPPO FS HAPIMAG ITALIAINTESA SAN PAOLO
IRCALA RINASCENTELADURNERLIDLLUXOTTICA GROUPMARIELLA BURANIMcARTHURGLEN ITALY
16
Buildings
SECTORS
PUBLIC BUILDINGS
SPORT & FREE TIME
HISTORICAL HERITAGE
INDUSTRIAL
HOSPITALITYHOSPITAL CONSTRUCTIONS
This sector deals with:
Major clients:MILANO DUNEONE WORKSOSRAMPALA ARREXPAPALINIPARCO DELLA CERTOSAPARK HOTEL BRASILIAPARK HOTEL JUNIOR
PIOVANPOOL ENGINEERINGPRISMA ENGINEERINGSACAIMSALESIANISILIS PARKSIMONE MICHELISTEFANEL
SUORE FRANCESCANETAJER D’OROUNICREDITUNITED COLORS OF BENETTONUPIM
18
Infrastructures
SECTORS
ROADS AND HIGHWAYS AIRPORTS
PORTS SEA-BASED CONSTRUCTIONS
This sector deals with:
Major clients:AEROPORTO DI VENEZIAAEROPORTO DI BERGAMOAEROPORTO DI BOLOGNAANASAPLEONAAPVC.E.R.V.E.T.
CARRON COSTRUZIONIF&M INGEGNERIAGRUPPO FS L&S GROUPMcARTHURGLEN ITALYONE WORKSOPEN FIBER
PARCO DELLA CERTOSAPOOL ENGINEERINGPRISMA ENGINEERINGPRO.TEC.OSACAIMSIRAM
TELECOMMUNICATION NETWORK
2020
Energy
WASTE TREATMENT PLANTS
SECTORS
HYDROELECTRIC POWER PLANTS THERMOELECTRIC POWER PLANTS
COGENERATION/ TRIGENERATION PLANTS
This sector deals with:
Major clients:ACEGAS – APSACTVALPERIAAMGA – CALORE & IMPIANTIATER VENEZIAATZWANGERBILFINGER SIELV
COMUNE DI ALLEGHECOMUNE DI ERACLEACOMUNE DI JESOLOCOMUNE DI TREVISOCOMUNE DI VENEZIACPL CONCORDIA E–DISTRIBUZIONE
EDISONENELGRUPPO VERITASGSE – GESTORE SERVIZI ENERGETICIJESOLO PATRIMONIO
2222
Energy
SECTORS
PHOTOVOLTAICSOLAR HEATING COLLECTORS
WIND POWER
GEOTHERMAL ENERGY
BIOMASS
This sector deals with:
Major clients:LADURNERMANUTENCOOP FACILITYPROVINCIA DI PADOVAPROVINCIA DI TREVISOPROVINCIA DI VENEZIAREGIONE EMILIA ROMAGNAREGIONE LOMBARDIA
REGIONE PIEMONTEREGIONE VENETOS.V.O.L.T.A.SINERGIESIRAMSKILLS. AGRICOLA VISENTINI
SOLARIS ENERGYTREVISANULSS 3 SERENISSIMAULSS 4 VENETO ORIENTALEVEGA ENERGIE
24
Industrial Research
SECTORS
Carbon Fiber Green Oil HOFER (HOrizon For the carbon fibER) Project’ goal is the study of an alternative Carbon Fibre (CF) precursor, based on lignin (a renewable source). The objective is the production of sustainable and cheaper CF materials, with positive impact on technological and economical aspects. To-date, the use and diffusion of CF materials has been limited by production costs. These are mainly due to precursor obtained from acrylonitrile polymerization and the related complex production processes. HOFER will generate R&D and market expansion in CF business. Lignin can be obtained from many industrial process waste (e.g. paper production and bio-refineries), favoring waste enhancement as secondary raw material, thus reducing waste treatment and pollution. This recovery, linked to the natural abundance of lignin and its chemical properties, produces virtuous mechanisms in economic and technological aspects, related also to the “Circular Economy”. HOFER’s main target is to produce a low to medium grade CF at a low cost extending its applications to various sectors (e.g. civil strengthening, healthcare devices, etc.) HOFER objectives are to demonstrate the feasibility and sustainability of a new process, proving the scalability to industrial needs, bring EU industries to leading positions in the CF field, promote new investments, currently limited and dependent on non-EU markets, expand CF production and markets, leading to employment growth.
Green Oil bio refining plant for the sustainable processes experimentation by carbon dioxide. The project has involved for over 2 years SEINGIM jointly with: Parco Vega, Sapio, Cà Foscari University of Venice and University of Udine. The first experimentations done with rapeseed, hemp and grape seeds have brought very interesting results. Analyzing the grape seeds, the very high value of EPA (Omega 3 and 6) stands out. The use of this element is widespread in pharmacy and homeopathy. It raises lots of interest the fact that hemp contains a notable quality of linoleic acid that is useful for cosmetics. The systems has been designed both for the experimentation with liquid and solid matrix. It is important to note that the results obtained are achieved through a “green” system, with 0 emissions, using a natural solvent such as carbon dioxide (CO2) often used in supercritical state. Using this natural solvent, we can substitute the artificial and chemical solvents that can pollute the final product. SEINGIM disposes of a plant with enormous experimentation potential. SEINGIM puts this potential available to all the public and private bodies that would like to realize research and development, offering also technical and administrative support. This interesting and formative experience has brought SEINGIM to the first approach towards the new frontier of the GREEN CHEMISTRY, natural and substitutive to the current chemistry.
This sector deals with:
SERVICES OFFERED BY SEINGIM
Management
Engineering
• Process Engineering• Electrical Engineering • Instrumental Engineering• Automation and Control Engineering• Telecommunications Engineering• Machinery, Package, Static equipment and
Piping Engineering• Thermotechnics and HVAC Engineering• Civil and Structural Engineering• Energy Engineering – Renewable Energy• Energy Engineering – Audit and Efficiency• Fire Protection Engineering• Environment and Safety
• Project Management & Control• Planning and Scheduling Management• Cost Management & Control• Procedures / Authority Requirements• Procurement Management• Construction Management• Project Completion Management• Commissioning & Acceptance Testing
Management
28
SERVICES - ENGINEERING
Main activities developed• Site survey• Consultancy and feasibility study• Process Design Data Book (system
operational capability, technology description, process unit description, site environmental conditions, consumptions and characteristics of raw materials, utilities characteristics and relevant energy consumption, preliminary plant layout)
• Energy and material balance• Fluids list with specified design conditions
and materials requirements• PFD (Process Flow Diagrams) • P&ID (Piping & Instrumentation Diagrams) • Equipment sizing, control instrument and
safety equipment• Piping Specifications• Plant Operation Manual • Technical specifications for purchase and
request for technical proposal • Evaluation and technical alignment of
technical bids• Economic evaluation of the works • Operation management and works
supervision • Pre-commissioning, commissioning, Plants
Start-Up
Main activities developed• Site survey• System verification w.r.t standards and
regulations compliance• HV Transmission lines• MV/LV Electrical cabins• PCC (Power Control Centre) and MCC
(Motor Control Centre)• Electric Switchboards, Circuit breaker
selection and power lines sizing• Lighting plants and Lighting calculations
Electric power lines sizing and relevant protection coordination
• Earthing systems• LPS (Lightning Protection Systems) • Cathodic protection systems• Sound diffusion systems and EVAC
(Emergency Voice and Communication) • UPS (Uninterruptible Power Supply)
systems and Electric generator systems • Technical specifications for purchase and
request for technical proposal, evaluation and technical alignment of technical bids
• MTO (Material Take Off) and BOQ (Bill of quantities)
• Economic quantification of the works • Operation management and works
supervision• Pre-commissioning, commissioning, Plants
Start-Up
Process Engineering
Electrical Engineering
29
SERVICES - ENGINEERING
Main activities developed• Site survey• Data sheets of valves, metering, control
and safety instruments• Positioning layout of instruments, junction
boxes, compressed air distributors • Cable trays paths layouts• Control room layout• Cables list• Hook-up drawings: pneumatic and
electrical (primary and secondary)• Loop diagrams Data sheet: junction boxes,
instrumentation cables, instrumentation equipment, etc.
• Intrinsically Safe Loop verification• Switchboards of electromechanical (relay)
safety interlocks• Pre-commissioning protocol• Punch list• Technical specifications for purchase and
request for technical proposal• Evaluation and alignment of technical bids • MTO (Material Take Off)• BOQ (Bill of quantities)• Economic quantification of the works• Operation management and works
supervision• Pre-commissioning, commissioning, Plants
Start-Up
Main activities developed• Site survey• Functional specifications of automation /
control systems• Cause-Effect Analysis diagrams/tables • DCS I/O and Interlocks signals list• PLC (Programmable Logic Controller),
DCS (Distributed Control Systems), ESD (Emergency Shutdown System), F&G (Fire & Gas), SIL (Safety Integrity Level), PCS (Process Control System)
• RTU (Remote Terminal Unit) systems• Automation and control logic diagrams
development• Process synoptic graphic pages• Technical specifications for purchase and
request for technical proposal• Evaluation and alignment of technical bids• MTO (Material Take Off)• BOQ (Bill of quantities)• Economic quantification of the works• Operation management and works
supervision• Pre-commissioning, commissioning, Plants
Start-Up
Instrumental Engineering
Automation and Control Engineering
30
Main activities developed• Site survey• PABX (Private Automatic Branch exchange)
systems• PAGA (Public Address General Alarm)
systems• TETRA (Terrestrial Trunked Radio) systems• GPS (Global Position System) systems• UHF/VHF systems• LAN (Local Area Network) systems• VOIP (Voice Over IP) systems• TV Entertainment systems• TVCC (Close Circuit TV) systems• TV-Sat systems• Antenna systems• Technical specifications for purchase and
request for technical proposal• Evaluation and alignment of technical bids• MTO (Material Take Off)• BOQ (Bill of quantities)• Economic quantification of the works• Operation management and works
supervision• Pre-commissioning, commissioning, Plants
Start-Up
Telecommunications Engineering
Main activities developed• Site survey• Equipment Data Sheets (tanks, vessels,
columns, heat exchangers, etc.)• Lines List• Pressure Equipment Sizing conforming to
PED (Pressure Equipment Directive)• Equipment layout• 2D and 3D Pipe routing design, equipment
nozzles orientation definition• Isometric Drawings (Sketch)• Stress Analysis• Coating and insulation technical
specifications preparation• Technical specifications for purchase and
request for technical proposal, evaluation and alignment of technical bids
• MTO (Material Take Off)• BOQ (Bill of quantities), economic
evaluation of the works• Operation management and works
supervision• Pre-commissioning, commissioning, Plants
Start-Up
Machinery, Package, Static equip. and Piping Engineering
SERVICES - ENGINEERING
31
Main activities developed• Site Survey• Structural calculations (reinforced concrete
elements, metallic structures, etc.)• Stress and deformation analyses of the
structures• Structural limit state analysis• Structures instability analysis• Foundations loads calculations• CoG (center of gravity) calculations• Definition of lifting schemes/technical
procedures• Assembly and detail drawings of main
metallic structures• Assembly and detail drawings of secondary
metallic structures (stairs, balconies, walkways, railings, etc.)
• Bureaucratic procedures for building permits• Value estimations, cadastral (land registry)
certificates and procedures, fractioning documentation, cadastral (land registry) stacking and servitude procedures, services for expropriation procedures
• Safety coordination during design and/or execution phases
• Technical specifications for purchase and request for technical proposal
• Evaluation and alignment of technical bids• MTO (Material Take Off)• BOQ (Bill of quantities), economic
quantification of the works• Operation management and works
supervision• Pre-commissioning, commissioning, Plants
Start-Up
Civil and Structural Engineering
Thermotechnics and HVAC Engineering
Main activities developed• Site survey• System verification in compliance with
Italian Ministerial Decree 37/08 and Italian Legislative Decree 81/08
• Heating and air conditioning systems• Air conditioning and ventilation, sanitary
water systems, firefighting systems, Solar water heating systems
• Assistance in the tender for contractor selection
• Cogeneration systems• Rain water collection and recovery• Technical advice on regulations in force• Exhaust fumes and technical gases• Methane and industrial gas systems• Heating and refrigerating systems• Lawn irrigation• Control and adjustment systems• Technical specifications for the purchase
and requests for quotations• Evaluation and alignment of technical bids• BOQ (Bill of quantities), economic
quantification of the works• Operation management and works
supervision• Pre-commissioning, commissioning, Plants
Start-Up
SERVICES - ENGINEERING
32
Energy Engineering Audit and Efficiency
Main activities developed• Survey of the housing and facilities • Analysis of the building, of opaque
surfaces, transparent and floors dispersants
• Production of Energy Diagnosis made to the standard required by the UNI CEI / TR 11428
• Verification of the energy needs and the degree of energy efficiency
• Analysis of energy consumption • Analysis of energy efficiency rate • Study of efficiency energy rate of the
systems• Estimation of the potential advantages and
costs of intervention, financial assessment • Support from local authorities and private
companies for procedures aimed at energy planning and installation of optimal production systems
• Advice and assistance for the preparation of documents necessary to obtain white certificates and other state facilities
• Energy certification of technical reports and editorial specialist (Law 10)
• Technical management of the work• Assistance at Certifying Organizations
(Leed, Casaclima, etc.) for the procedures to energy certification
Energy Engineering Renewable Energy
Main activities developed• Site survey: Solar, Photovoltaic, Biomass,
Geothermal, Hydroelectric, Wind plants• System verification in compliance with
regulations in force• Preliminary projects for request of
authorizations• Detailed construction design• Clamping system design• Technical advice on regulations in force• Technical specifications for the purchase
and requests for bids• Evaluation and alignment of technical offers• BOQ (Bill of quantities), economic
quantification of the works• Operation management and works
supervision• Pre-commissioning, commissioning, Plants
Start-Up• Advice and assistance for the preparation
of documents necessary to obtain incentives
SERVICES - ENGINEERING
33
Environment and Safety
Main activities developed
Acoustics• Design of passive acoustic requisites for
buildings in compliance with Decree of the President of the Council of Ministers dated 05-12-1997 implementing the framework law on noise pollution No. 447 dated 26/10/1998
• Evaluation of acoustic requirements for internal sound sources (technological systems)
• Sound insulation testing
Safety on construction sites• Design and execution stages coordination
Safety on workplaces• Risk exposure evaluation
Electromagnetic impact measures and consultancy• Measures of exposure to various sources of• electromagnetic fields both in the civil and
industrial sectors
Hazardous area classification• Classification of hazardous areas according
to applicable regulations and standards
Main activities developed• Site survey• Technical Data Sheets of equipment for
detection, warning and fire extinguishing • Structure adaptation plan in compliance
with specific fire regulations and guidelines (not specifically regulated)
• Project verification request to the Fire Department for obtaining the Fire-safety Compliance declaration
• Technical Documentation: processing and preparation of the technical report and the drawings in compliance with local regulations
• Fire Resistance Certifications of structure • Sworn confirming compliance with the
applicable regulations in fire safety• Renewal of the Fire Prevention Certification
for existing activities• Evacuation plans in compliance with Italian
Ministerial Decree dated 10 March 1998 • Operation management and works
supervision• Pre-commissioning, commissioning, Plants
Start-Up
Fire Protection Engineering
SERVICES - ENGINEERING
34
• Project Execution Plan• Control that Customer project targets and
requirements are achieved• Project organization & control (functions/
responsibilities)• Organization and management of
the required personnel (works and administration)
• Communication management• Time management and reporting• Scope management• Risk management• Health, Safety, Environment and Quality
Assurance Management• Document Control management• Progress reporting & meeting management• Organization and issuing of meetings
minutes• Project closeout reporting• Contractors’ Engineering and Design
Package documentation reviews
• Master Planning (Engineering, Construction, Procurement, Erection, Commissioning)
• Target Time Schedule (critical milestones)• Engineering Time Schedule (engineering
by Contractor and others)• Purchasing Time Schedule• Detailed erection and assembly planning • Document Delivery schedules• Contract Control schedules• Project progress reports
Project Management &Control
Planning and SchedulingManagement
SERVICES - MANAGEMENT
35
• Electrical, Instrumentation, & Control (EIC) procedures
• Fire Safety and Risk Analysis Reports• Building Regulations procedures• Local Permitting• Environmental procedures
• Cost breakdown structure• Allocation of project budget to individual
purchase packages and cost accounts• Orders control• Invoice control compared to committed
costs• Control of costs w.r.t. predicted final cost
projections• Estimation of cash flow• Cost reporting• Claim management control/reporting• Cost of change/Pricing variations
Cost Management & Control
Procedures / Authority Requirements
SERVICES - MANAGEMENT
• Procurement plan and strategy • Engineering Specification and Definition of
Each Tender• Pre-selection of suppliers based on tender
comparison and recommendation for detailed commercial evaluation
• Supplier list• Supplier audits• Enquiries delivery to multiple supplier• Bid clarification meetings (Technical
evaluation / clarifications)• Technical and initial commercial tender
comparison report• Final commercial comparison report and
recommendations selection • Preparation of purchase orders and
contracts• Procurement status reporting and follow-up• Variation control and management• Supplier documentation review, approval
and final delivery documentation follow-up (Report)
• Expediting and Report• Payment arrangement• Check Supplier invoices• Open package inspection (material and
equipment inspection/acceptance)• Customs clearance/inland transportation• Entrance control on-site for equipment and
materials• Warehouse control
Procurement Management
36
SERVICES - MANAGEMENT
• Construction plan, Construction Management, Site Administration, progress reporting
• Constructability analysis, Construction Execution Plan and Procedures
• Quality Plan, Construction Conformance Checking
• Definition of organization and responsibilities
• Site Material Control• Emergency evacuations procedures, Site
Security Control, First-aid program• Supervision of the site office and field
organization• Preparation and update of construction and
erection planning• Management and coordination of activities• Report and coordinate the establishment of
corrective plans for delays• Assurance of proper availability of all
updated project & technical documentation• Site Document Management• Coordination activities of the works
inspectors• Evaluation of subcontractor’s supervision &
administrative policies• Approval of the completion of the
construction works based on the inspector’s reports
Construction Management
• Commissioning Plan• Commissioning Execution• Coordination of start up• Coordination of test runs• Acceptance Testing Plan• Acceptance Testing Execution• Acceptance Testing Reports
• Management of handover procedures• Development and Management of Punch
Lists• Rectification and re-check• “As Built” documentation for all Disciplines
Project Completion Management
Commissioning & Acceptance Testing Management
37
Software
SOFTWARE
General for all disciplines• OFFICE Various Releases (Word, Excel,
Access, PowerPoint, Publisher, Outlook)• AutoCAD (Various Releases)• Autodesk REVIT (BIM)• Microstation/J - Bentley Systems• ACCA Software - Primus C (Accounting)• ACCA Software - Primus P+A (Accounting)• ACCA Software - Mantus (Mainentance Plan)• DWG Trueview• NavisWorks JetSream• Adobe CC (Photoshop, Illustrator, etc)
Process Engineering• Aspen Tech - Aspen HYSIS (Process
simulation)• Aspen Tech - Aspen Plus (Chemical
process and polymers simulation)• Schneider - Simsci Pro II and Excel
calculation sheets (equipment calculation)• Schneider - Simsci Pipephase (hydraulic
calculation)• Intergraph Corporation Smart Plant P&ID• Integraph Corporation CADWorx P&ID
Professional
Electrical Engineering• Integraph Corporation Smart Plant
Electrical• ETAP (Electrical Power System Analysis &
Operation Software)• Electrographics, Ampere Professional
(Sizing and Electrical Calculations)• Electrographics, Smart Professional
(Design Optimization in computer)• NeXT, ProLED (Electric Power Distribution
Design)• Dialux (Lighting calculations)• ATEX Gas e Polveri TNE (Hazardous Area
Classificlation)• ZEUS 2 (Lightning Protection System)
Thermotechnics & HVAC Engineering• Edilclima (Buildings Energy performance)• Energy Plus (Buildings Energy
performance)• CENED Plus (Buildings Energy
performance)
Instrumental, Automation & Control, Telecommunications Engineering• Intergraph Corporation Smart Plant
Instrumentation (ex: INTOOLS) • Aveva Instrumentation• Electrographics, Smart Professional
(Design optimization in computer)• Instrucalc (Sizing of regulation Valves and
Flow rate elements) • CONVAL (Valves Sizing)
Mechanical & Piping Engineering• Integraph Corporation PDS (3D Modelling)• Intergraph Corporation Smart Plant 3D
(Modelling 3D)• Integraph Corporation CADWorx Plant
Professional• Aveva PDMS (3D Modelling)• CAESAR II (Stress analysis) • PUMA/ECOS: piping MTO• HTRI /HTFS (Thermal rating of heat
exchanger)• Integraph Corporation Isogen• Integraph Corporation PV Elite
Civil and Structural Engineering• Tekla Structures 14 Full Detailing• NeXT, ProLED (Electric Power Distribution
Design)• SAP 2000• STAAD3
Energy Engineering• PV configurator (Photovoltaic Analysis)• ACCA Software - Solarius-PV (Photovoltaic
Analysis)• PV Syst 6 Premium (Photovoltaic Analysis)
Fire Protection Engineering • Namirial - CPI Win BM (Fire Fighting)
Project Management• Microsoft Project• Oracle Primavera P6 Professional
SEINGIM's Team - July 2018
Partner
40
Editi
on D
ecem
ber 2
018
SEIN
GIM
EN
HEADQUARTERS:
CEGGIAViale Duca d’Aosta, 67/630022 - Ceggia (VE)
PADOVAVia Venezia, 90/A35131 - Padova
MILANOVia Federico Confalonieri, 3820124 - Milano
FANOVia Giuseppe Filippini, 161032 - Fano (PU)
BOLZANOMarie Curie Straße, 1739100 - Bolzano
CAGLIARIVia Giuseppe Aiana, 6709030 - Elmas (CA)
ISPRAVia Enrico Fermi, 274921027 - Ispra (VA) c/o JRC Joint Research Centre
ROMAVia Barnaba Oriani, 10300197 - Roma
[email protected] - www.seingim.it