Company presentation

It was established in 1963.

It’s based in Parma, Italy.

About 80 Employees.

Private and indipendent company.

2017 turnover was about EUR 13M

1963 1979

2005

(approx 40,000 square feet)

36 3739

43

47 48 49 4845

49 50

5861

67 68

77

8179

0

10

20

30

40

50

60

70

80

90

2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017

Dipendenti

0

2,000,000

4,000,000

6,000,000

8,000,000

10,000,000

12,000,000

14,000,000

2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017

Fatturato IMETA

Imeta Srl achieved the ISO9001 quality processcertification in March 1999.

In March 2016 Imeta Srlachieved the full AEOCertification with full rights.

Thanks to this Certificationwhich decreases the goodsinspections during Customsprocedures, Imeta canoffer short crossing timesfor direct deliveries to theUSA, Switzerland, Japan,Norway and China.

All main can-makers such as: Silgan, Ardagh, Crown, BWAY,Ball, Mivisa, Nampack, Sonoco, …

All main can fillers, such as Nestlé, Masterfoods, Dole, DelMonte, Kraft-Heinz, Bolton…

Seamer manufacturer, such as ZACMI, Zilli & Bellini, CFT,Boni, Soudronic, Germann & Frei, …

The BASE MATERIALS aredivided in two main families:

For CANNERY For CAN-MAKING

Seaming chucks and rolls can betreated with the following specialSURFACE COATINGS toimprove their characteristics:

Titanium CVD coating Titanium PVD coating Chrome Plating UCAR Plating DIAMOND Coating

Seaming Rolls made ofdifferent Materials andCoatings

Seaming Chucks made ofdifferent Materials andCoatings

The process CVD (Chemical VapourDeposition) produces the steamphase of the compounds to platethrough the chemical reactionsoccurring at a temperature range of800 / 1000 °C.

The deposit coloured in goldenyellow, is represented by a triplelayer TiN-TiC-TiN for a variable totalthickness value from 6 to 8 µmhaving a variable hardness of 2800/ 3200 HV.

The PVD coating (Physical VapourDeposition) acts undertemperature conditions within250-480 °C and is realizedthrough an ionic bombardment ofthe compounds followed by thedeposition phase.

The golden yellow deposit isformed by a TiN layer with avariable thickness from 5 to 6 µmand has a variable hardnesswithin the range of 2700 - 3000HV.

Manufacture about 20.000 Chucks and Rolls per year.

Thousands semi-finished parts ready on stock for fast delivery.

CHANGE PARTS FOR ANYSEAMER AND CAN MAKINGMACHINES

SPARE PARTS FOR ANY SEAMERAS:

Gears, Shafts, Bushings,Lifters,Bearings, Oil seals, Keys, Cams, …

Upgrading Kits for seamers

Special Cover Feeders for any seamer and can makingmachines.

Gear Driven Lifters for Angelus 60L and other seamers.

End Making Tools:

Curling rings Curling sectors Die parts Complete dies

Can Making Tools:

Beading Sectors Beading Rollers Spin-Flangers Die Flangers Necking tools

Complete set of Change parts forNecker/Flanger/Seamer LANICO BF280, CF380, …

Change parts and Spare Parts for can fillers

Overhauling, Upgrading and sale of Seamers and Can-Making machines.

Special projects: Angelus 180S

Special projects: Angelus 120L Beverage

Special projects: Angelus 60L aerosol

Special projects: Manzini A400 Cannery

Skilled service Technicians travelling all around the World.

Seam training on customer’s seamer

Experienced Engineers, working with Inventor, able to assistcustomers in any special project.

With over 50 years know-how, Imeta can offer to the Customersseaming tests in a specialized laboratory.

Choice of the best seamingprofiles after laboratoryanalysis and tests performedon cans and lid samples.

Analysis on seaming defects.

Specials profiles for reduced tickness on tinplate

Recommended settings for better results in seaming.

Imeta SrlStrada Burla 279A, Parma 43122 Italy

Tel +39 0521 1688811 - Fax +39 0521 1688819www.imetasrl.com info@imeta.it