company certifcaion welding
TRANSCRIPT
SOME OF THE MANAGEMENT STANDARD.
• ISO 900O -QMS• ISO 14000 -EMS• ISO 18000-Occupational Health and Safety
Management System (OH& S MS) And International Standard OHSAS 18001:1999
• ISO 27000-ISO/IEC 27002 provides best practice recommendations on IS security management systems (ISMS).
EMERGING STANDARDS
• ISO-3834 –Quality requirements for fusion welding of metallic materials.• EN -15085- Welding of railway
vehicles and components.• IRIS- International Railway
Industry Standard
Welding is a Special Process-Why
• 7 - Product realization
• 7.5 Production and service provision
• 7.5.2 Validation of processes for production and service provision
– The organization shall validate any processes for production and service provision where the resulting output cannot be verified by subsequent monitoring or measurement and as a consequence, deficiencies become apparent only after the product is in use or the service has been delivered.
What is ISO-3834&EN 15085
• It is an international standard created by the welding professional
• ISO 9001 defines requirements for quality management system
• ISO 3834 also defines the quality requirements, only welded products.
• EN 15085 for railway applications.
What is ISO-3834&EN 15085(contd)
• The standard specifies the requirements relating only to the welded structure.
• The standard can also be used as a production control system.
• ISO 3834 is not a product standard, but it is often cited as a requirement of various products to ensure good practice in the welding and to prevent premature failures.
What is ISO-3834&EN 15085(contd)
• The standards provides details of how to control the various welding and welding-related operations to achieve the desired quality consistently
• The company that is certified according to this standard gains an advantage when competing with other companies in European and World wide markets.
ISO 3834 part-1 to 4
• ISO 3834-1-General requirements
• ISO 3834-2- Comprehensive quality requirement
• ISO 3834-3- Standard quality requirement• ISO 3834-4 -elementary quality requirement•
ISO 3834-2- Comprehensive quality requirement
Constructions in which the failure of welds may lead to
• total product failure • with significant financial consequences • Major injury. • The product may be subject to dynamic
loading • In addition to high static loading.
ISO 3834-3- Standard quality requirement
Constructions in which failure of welds • impair the intended use of construction.• Normal safety risk • Financial losses not extreme.