compact hydraulic actuation - incoe · hem - miniature hydraulic a) b) h) i) g) xe e) c) d) f) k)...
TRANSCRIPT
-
MELT LOGISTICS®
Compact hydraulic actuationincreasing freedom in mold design:HEM miniature hydraulic
-
INCOE® Global Headquarters | 2850 High Meadow Circle | Auburn Hills, MI 48326 USA | T: 248-616-0220 | E: [email protected] | www.incoe.com©2021 INCOE® 05/21
Direct-Flo™HEM - Miniature Hydraulic
a) b) h) i) g)
XE
e) c) d) f)
k)j)
l)
HEM
KEY DATACompact hydraulic actuatora) For nozzles in the DF 5, 8, 12, 18, 22 and 25 seriesb) Screwed onto the manifold c) Valve gate adjustable from behindd) Piston stroke occurs entirely within the casinge) ��Patented, improved thermal separation of manifold
and cylinderf) ��For either rear installation directly adjacent to the mold
plate or with spacingg) ��Actuator casing can be dismantled without
unscrewing the cooling linesh) ��Cooling line outlets possible in 4 different directionsi) �HEM without cooling �for max. 270°C melt temperature and 60°C mold temperature �for rear installation directly adjacent to the mold plate only�
BENEFITSProduction and assemblyn�Smaller milling areas, less production effort requiredn��Increased freedom in mold designn��Easy-access and adjustableOperationn��Protects movable parts and seals through thermal
separation from manifold n��No post-production aftercooling neededn�Enhanced mold stabilityn��Injection points can be individually selected within a
confined spaceSingle valve gate applications �j)n��Possible alternativen��Standard one-port manifold system can be usedn��Only small distance between inlet bushing
and nozzleMulti-cavity molds �k)n��Small pitch dimensions and tighter cavity spacing possiblen��Higher numbers of cavities possiblen��Use of hydraulics where there was once no roomn��Ready-to-go pre-assembled systems possibleMolds for large plastic parts �l)n��Greater flexibility in selection of gate pointsn��Sufficient space for supply linesn��Combinable with large and long nozzles
XA
HEM 5/8/12 HEM 18/22/25
71 95
8,5 14,5
37
40,5
37
40,5
43
45
52
55
58
62
75
69
DF 5 DF 8 DF 12 DF 18 DF 22 DF 25
2,5 3 5 8 8 8
Actuator Stroke
K XA1)
XE1)
Valve pin Ø
Nozzle series