commercial products space-saver connectors · 2 eaton’s crouse-hinds business space-saver...
TRANSCRIPT
Commercial Products
Space-Saver ConnectorsEMT, AC/MC/FMC , Liquidtight
and Rigid/IMC Connectors
2 EATON’S CROUSE-HINDS BUSINESS
Space-Saver Fittings
Space-Saver fittings are engineered to increase productivity, save on material cost and add wiring room in the box or enclosure:
• Male threads on locknuts thread into the fitting body for a low-profile, secure fit - consuming minimal space on the inside of the box or enclosure
• Smooth pulling surface on locknuts eliminate the need for plastic bushings or insulated throats and ensure the integrity of wiring during pulling.
• Angled locknut teeth bite into the enclosure preventing loosening from vibration and a create positive ground continuity.
• Third party certification provides peace of mind that the fittings are tested and listed to meet project certification requirements
Maximize space inside enclosures unlike traditional
fi ttings with external threads on the fi tting body.
Family Conduit Size/Range Typical Application
Space‐Saver Set Screw EMT 1/2" ‐ 1" To connect EMT conduit to a box or enclosure
Space‐Saver Compression EMT 1/2" ‐ 1" To connect EMT conduit to a box or enclosure
Space‐Saver Raintight EMT 1/2" ‐ 1"To connect EMT conduit to a box or enclosure in wet locations - third party certified to more stringent requirements for raintight applications
Space-Saver ACB AC/MC/FMC 3/8" ‐ 1"To connect AC/MC Cable and FMC conduit to a box or enclosure
Space-Saver Liquidtight Liquidtight 3/8" ‐ 1"To connect liquidtight conduit to a box or enclosure
Space-Saver Liquidtight Ground Liquidtight 3/8" ‐ 1"
To connect liquidtight conduit to a box or enclosure and allows for termination of an external ground wire
Space-Saver Conduit Hubs Rigid / IMC 1/2" ‐ 4"
To connect Rigid/IMC conduit to a box or enclosure. Designed for use indoors or outdoors. Specific applications include food processing plants, distilleries, breweries, sewage disposal plants, chemical plants, paper processing mills and refineries
Space-Saver Selection Chart
EATON’S CROUSE-HINDS BUSINESS 3
Male threads on locknuts thread into the body for a low-profi le, secure fi t - consuming minimal space on the inside of the box or enclosure
EMT Space-Saver Design Features
Space-Saver Fittings
Low Profi le Design:
In handy box applications, traditional EMT connector threads protrude inside the box and create the cumbersome and labor intensive need to clip device mounting screws during installation. The Space-Saver EMT connector’s low profi le design eliminates this requirement!
In steel outlet box applications, traditional EMT connectors protrude inside the box and make installation diffi cult in adjacent corner knockouts. Space-Saver EMT connector’s low profi le design eliminates this potential installation diffi culty.
Smooth pulling surface on locknuts eliminate the need for plastic bushings and ensure the integrity of wiring during pulling
Angled teeth on locknuts bite into the enclosure preventing loosening from vibration and a creating a positive ground connectivity
Third party certifi cation provides peace of mind that the fi ttings are tested and listed to meet project certifi cation requirements
A
B
C
A
B
C
D
E
D
E
Traditional fi tting threads block device screw
WitWitW h Sh SSSpacpace-Se-Se Saveaveaveverr, r, fasfastetetentet ing q yof of devdevdevdeviceice isis ququickickckkkk anananananandddd edd asy
TrTTraTraTT ditditionionala fi tfi tfi tintinng tg tgg hrehreadsads blobloblol ck ckck devdevicece scscrewrew
TTraTraTraTraTraTTrTTraTraTraTrTTraTTTraTraTrTTraT aditditdditditditititititditditditdditdiditddidiittditdid ttd tiooionionionnonononononioiioiononii nnionioionoononionioiiooi noo alalaallalllaaaaaaa fi tfi tfi tfi tfi ttfittttfi ttttfi ttintintintintitttititttitintt gsgsggsggsgsgsgsgsgsgsgsggsgsgsgssggssssgg SpaSpaSpaSpapaSpaSpapaaapaaap ce-ce-cece-e--eceece-ce-ecce-eee-ccee---e-SSavSaSaSaSaavSavSavavSavvSavSSavSavavavvSSSavSavvSaavSavS vSSavSSSSSSaaSaS vSavverer er er erer ererererereereeer makmakmakmakmakmakmakakmamakmakmakmakakmakmakmakakmakmm esessssseseseseeseeeeeeeeee corcorcorcorcorcorcorrcororcorrrnernernernernernnernernernernernernernnernerrnerrrnerne insinssinininininsinsnsinsnsinsnsinssnsinsinsiinn ttaltaltaltaltatatataltaltalatatataataat latlatlatlatatatlatlatlataatlaalatllatalalatla ionioniooooionononononnioionionnnionionioniononionionononononononioniooonns es es es es es es es es es es ees e es esssss asyasyasyasyasyasyasyasyaasyyasyasyasyasysasyyasyyya y!!!!!!!!!!!!!!!
4 EATON’S CROUSE-HINDS BUSINESS
Cat. # Trade Size Unit Qty. Wt. Per 100 Dim. A Dim. B
SSBC50 1/2” 100 8 1.17 1.14
SSBC75 3/4” 50 12 1.47 1.36
SSBC100 1” 25 12 1.57 1.76
Space-Saver EMT Set Screw Connectors Ordering Information
Cat. # Trade Size Unit Qty. Wt. Per 100 Dim. A Dim. B
SSC50 1/2” 50 8 1.38 1.15
SSC75 3/4” 25 12 1.55 1.36
SSC100 1” 25 12 1.75 1.76
Space-Saver EMT Compression Connectors Ordering Information
Space-Saver Fittings for EMT Conduit
Applications:• Use to join EMT conduit to a box or enclosure
Features:• Male threads on locknut allow for more room inside the box• Smooth pulling surface won’t strip cable – no bushing or
insulated throat required• Angled teeth on locknut bite into enclosure, preventing
loosening from vibration and create positive ground continuity• Knurled wrenching surface on body for easy tightening • Zinc electroplated for corrosion resistance
Certifications and Compliances:• UL and cUL Listed File No. E-22132• UL Standard 514B• Certified by UL to CSA Standard C22.2 No. 18• Concrete tight when taped
Materials:• Body and nut – steel
Finishes:• Steel – zinc electroplate
Features:Compression Connector• The split compression ring assures solid attachment to the
conduit and positive ground continuity• The hex surface on the compression nut provide for easy
wrenching to quickly and easily tighten the nut
Features:Set-Screw Connector• Tri-head set screw may be installed using a slotted, Phillips,
or Robertson head screwdriver
BA
BA
Set Screw Compression
EATON’S CROUSE-HINDS BUSINESS 5
Materials:• Body and nut – steel
Finishes:• Body and nut – zinc electroplate
Cat. # Trade Size Unit Qty. Wt. Per 100 Dim. A Dim. B
SSRT50 1/2” 50 13 1.58 1.15
SSRT75 3/4” 25 18 1.7 1.38
SSRT100 1” 25 26 1.94 1.76
Space-Saver EMT Raintight Compression Connectors Ordering Information
Applications:• Use to join EMT conduit to a box or enclosure - third party
certified to more stringent requirements for raintight applications
Features:• The only Space-Saver EMT compression connector UL Listed
raintight• Male threads on the locknut maximize space in box or
enclosure and provide a smooth pulling surface, eliminating the need for a bushing or insulated throat fitting
• Angled teeth on locknut bite into enclosure, preventing loosening from vibration
• No disassembly of the gland nut is required for installation of the conduit
• Knurled wrenching surface on body for easy tightening• Hex shaped gland nut allows for easy wrenching, providing a
fast, tight application• Distinct black gland nut allows inspectors to tell at a glance
that the fitting is raintight and suitable for use outdoors• Gasket seals installation for raintight connection between box
and the connector
Certifications and Compliances:• UL and cUL Listed File No. E-22132• UL Standard 514B• Certified by UL to CSA Standard C22.2 No. 18• Listed Raintight• Concrete tight
Space-Saver for EMT Conduit - Raintight Compression
Cat. # Trade Size
KO Size
Cable Dia. Range Max./Min.
Unit Qty.
Wt. Per 100
Dim.A
Dim.B
Dim.C
SSACB38* 3/8” 1/2” .660 - .400 50 9 1.36 1.14 1.31
SSACB50* 1/2” 1/2” .920 - .520 25 12 1.39 1.14 1.57
SSACB75 3/4” 3/4” 1.11 - .680 20 14 1.46 1.36 1.71
SSACB100 1” 1” 1.375 - .930 5 30 NA NA NA
Space-Saver AC/MC/FMC Set Screw Connectors Ordering Information
Space-Saver for AC/MC/FMC Conduit - Dual Gripping Saddle Design
Applications:• Use to join AC/MC cable and FMC conduit to a box or
enclosure
Features:• Male threads on locknut allow for more room inside the box• Smooth pulling surface eliminates the need for insulated throat
fittings and/or plastic bushings• Angled teeth on locknut bite into enclosure, preventing
loosening from vibration• Dual gripping saddle design on the fitting safely secures cable
or conduit in place and prevents loosening from vibration• Tri-head set screw may be tightened using a slotted, Philips, or
Robertson head screwdriver• Steel fitting is zinc electroplated for added corrosion resistance• Suitable for use with steel or aluminum cables• Dry locations
Certifications and Compliances:• UL and cUL Listed File No. E-19188• UL Standard 514B• Certified by UL to CSA Standard C22.2 No. 18
Materials:• Body and nut – steel• Gasket – rubber
Finishes:• Body – zinc electroplate• Nut – painted black• Gasket – natural
BA
BA
*UL approved for use with aluminum interlocking grounding metal clad cable, Type MCIA (Southwire MCAP™)
MCAP™ is a registered trademark of Southwire Company
6 EATON’S CROUSE-HINDS BUSINESS
Cat. # Cat. # with lug
Trade Size
Unit Qty.
Wt. Per 100
Wt. Per 100 with lug
Dim.A
Dim.B
Dim.C with lug
SSLT38 SSLT38G 3/8” 25 19 23 1.58 1.19 1.87
SSLT50 SSLT50G 1/2” 25 21 26 1.61 1.33 2.02
SSLT75 SSLT75G 3/4” 15 31 36 1.66 1.60 2.24
SSLT100 SSLT100G 1” 5 44 48 1.82 1.86 2.55
Space-Saver Liquidtight Connectors Ordering Information
Space-Saver for Liquidtight Conduit - With and Without Ground Lug
Applications:• Use to join liquidtight conduit to box or enclosure
Features:• Liquidtight, raintight, oiltight for protection and long life in wet,
dusty and corrosive environments• Compact, slim diameter for tight space and neat appearance• Male threads on the nut maximize space in box or enclosure
and provides a smooth pulling surface eliminating the need for a bushing or insulated throat fitting- saving time & money
• Reusable, long ferrule prevents pull out and tight bend conduit “pop out”
• Hex shaped gland nut allows for easy wrenching, providing a fast, tight installation
• Split sealing ring allows sealing ring to be installed after installation of ferrule and is reversible to ensure correct installation. Impossible to install incorrectly!
• Grooved design on rubber gasket allows for a snug, captive fit ensuring the gasket will not fall off during installation
• Available with optional aluminum grounding lug for easy ground wire termination
Certifications and Compliances:• UL and cUL Listed File No. E-19189• UL Standard 514B• Certified by UL to CSA Standard C22.2 No. 18
Space-Saver Conduit Hubs
Applications:• Ideal for terminating rigid/IMC conduit through the walls of
enclosures• Designed for use indoors or outdoors with rigid and IMC
conduit. Specific applications include food processing plants, distilleries, breweries, sewage disposal plants, chemical plants, paper processing mills and refineries.
Features:• Male thread on the nut for a low-profile space saving fit• Quick and easy when installing rigid conduit nipple between
two existing enclosures• Insulated throat provides smooth pulling surface• Furnished with SG sealing gasket• Hub fits standard knockouts. No special tools required
Cat. # Trade Size Unit Qty. Wt. Per 100 Dim. A Dim. B
HUB1 1/2” 25 18 1.49 1.3
HUB2 3/4” 10 25 1.44 1.54
HUB3 1” 5 50 1.57 1.78
HUB4 1-1/4” 5 25 1.98 2.16
HUB5 1-1/2” 2 20 2.0 2.37
HUB6 2” 1 10 2.19 2.93
HUB7 2-1/2” 1 10 2.61 3.56
HUB8 3” 1 5 2.81 4.18
HUB9 3-1/2” 1 5 3.02 4.64
HUB10 4” 1 2 3.65 5.21
Space-Saver Conduit Hubs - Iron Ordering Information
Certifications and Compliances:• Class I, Division 2• Class II, Divisions 1 & 2• Class III, Division 1 & 2• UL and cUL Listed File No. E-19189• UL Standard 514B• Certified by UL to CSA Standard C22.2 No. 18• Suitable for wet locations
Materials:• Body and nut – malleable iron• Ferrule – steel • Gasket – rubber• Ground lug – aluminum
Finishes:• Body – zinc electroplate• Ferrule – zinc electroplate• Gasket – natural• Ground lug – natural
Materials:• Body and nut – malleable iron• Sealing ring – steel and rubber
Finishes:• Body and nut – zinc electroplate• Sealing ring – natural
B
A
BA B
C
EATON’S CROUSE-HINDS BUSINESS 7
Space-Saver Fittings
Notes:
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________
Eaton1000 Eaton BoulevardCleveland, OH 44122United StatesEaton.com
© 2015 Eaton CorporationAll Rights ReservedPrinted in USAForm No. 5202-0515May 2015
Eaton’s Crouse-Hinds Business1201 Wolf StreetSyracuse, NY 13208(866) [email protected]
For more information:
If further assistance is required, please contact an authorized Eaton Distributor, Sales Offi ce, or Customer Service Department.
Canada:
Toll Free: 800-265-0502FAX: (800) 263-9504FAX Orders only: (866) 653-0645
Mexico/Latin America/Caribbean:
52-555-804-4000FAX: 52-555-804-4020
Europe (Germany):
49 (0) 6271 806-50049 (0) 6271 806-476
Middle East (Dubai):
971 4 8066100FAX: 971 4 8894813
Singapore:
65-6645-9888FAX: 65-6297-4819
China:
86-21-2899-3600FAX: 86-21-2899-4055
Korea:
82-2-3484-678382-2-3484-6778
Australia:
61-2-8787-2777FAX: 61-2-9609-2342
India:
91-124-4683888FAX: 91-124-4683899
U.S. (Global Headquarters):Eaton's Crouse-Hinds Business
1201 Wolf StreetSyracuse, NY 13208
(866) 764-5454FAX: (315) 477-5179Orders Only: [email protected]
Eaton is a registered trademark.
All other trademarks are property of their respective owners.
Commercial Products delivers quality, reliability, labor savings and lower installed cost, all from a single dependable source. See the complete offering of Commercial Products at www.crouse-hinds.com.