combustible gas detectors - terraceneterracene.com/docs/test_instruments/terracene_499_542.pdf ·...

Features:• Automatic warm-up• Audible "geiger counter" signal• Visual leak size indicators (LEDs on Model 8800A)• Adjustable sensitivity • Completely portable, battery operated• Low battery indicator • Long, flexible probe for hard-to-reach places• U.L. approved Class I for intrinsic safety • MSHA approved for use in mines

The 8800 is a highly reliable broad-band combustible gas detec-tor that is extremely useful as a general purpose tool in any envi-ronment where gasoline, propane, natural or fuel oil are used.This instrument provides a "geiger counter" ticking signal whichincreases in frequency as the source of combustible gas or car-bon monoxide vapor is approached.

Model Description Price

8800 Combustible Gas Detector $293.008800A Gas Detector w/ LED Indication $335.008850 Gas Detector w/ LED’s & Audio Mute $335.008801 Replacement Sensing Tip $41.008806A Replacement NiCad Batteries $57.008803 Battery Charger $41.00

M490E

Specifications:Sensitivity: 50 to 1000 ppmWarm-up Time: Automatic, approx. 15 secondsResponse Time: InstantaneousDuty Cycle: ContinuousOperating Temp.: 33° - 100°F (0° - 38°C)Power Supply: 2 x 2.4V Ni-Cad batteriesBattery Life: 4 hoursProbe Length: 15" (381 mm)Dimensions: 8" x 3" x 1.8" (203 x 76 x 46 mm)Weight: 5.5 oz. (439 g)

Detectable Gases:HYDROCARBONS HALOGENATED• Methane (Natural Gas) HYDROCARBONS• Ethane • Methyl Chloride• Isobutane • Trichloroethane• Propane • Methylene Chloride• Pentane • Vinyl Chloride• Benzene KETONES• Hexane • Methyl Acetate• Acetylene • Acetone• Gasoline • Methyl Ethyl Ketone• Butane ETHERS• Toluene • Methyl Ether• N-Butane OTHER GASES• Naptha • Sulfur DioxideALCOHOLS • Hydrogen Sulfide• Methanol • Ammonia• Propanol • Hydrogen• Ethanol • Carbon Monoxide• Butanol • Chlorine

COMBUSTIBLE GAS DETECTORS

499

Leakator 10 makes leak detection easy! Visual and audiblealarms are provided. They, together with a sensitivity thumb-wheel, let you pinpoint large and small leaks quickly, while check-ing a relatively large area in a short period of time. Weighing lessthan 18 ounces, with a sensitivity of 20 ppm (methane),Leakator 10 can be used efficiently and continuously withoutfatigue.

Leakator's flexible 20 inch long probe retains its shape andmakes it easy to reach the awkward spots. The tough, brightly-coloured, loss-prevention housing means you won't leave thisinstrument behind or break it when you drop it onto a concretefloor. Bright LEDs for Power, Fail, and Low Battery keep youinformed of Leakator's operational status. The instrument is ULapproved and is furnished complete in a custom carrying case,installed and tested gas sensor, flexible probe, earphone andinstruction manual.

Applications:• Pinpoints combustible gas leaks in residential combustion

appliances

• Surveying gas pipelines

• Inspecting valves, regulators, and meters on gas equipment

M650E


19-7083 Combustible Gas Detector $433.0019-0398 Replacement Sensor $66.0019-0403 Flexible 20" Probe Assembly $161.0051-2529 Earphone $13.00

Specifications:Detectable Gases/ Acetone, Acetylene, Benzene, Butane,

Compounds: Ethanol, Ethylene Oxide, Gasoline, Hexane,Hydrogen, Industrial Solvents, Methane, Paint Thinners, Propane, Natural Gas andNaphtha

Sensitivity: 20 ppm methaneResponse Time: InstantaneousAlarms: Visual and audible relative to gas presenceSensor: Solid stateSensor Life: Typically over 5 yearsProbe: Self storing 20 inch flexible probePower Supply: 5 Alkaline C-cells, not includedBattery Life: 30 hours of continuous useProbe Length: More than 20" (51 cm)Dimensions: 8.5" x 2.25" x 1.75" (216 x 57 x 44 mm)Weight: 18 oz. (510 g)

Features:• Simple thumb wheel sensitivity control allows easy one hand

operation• Reliable, solid state sensor tested to eliminate test gas calibration• 10 ultra-bright LEDs pinpoints a small gas leak quickly, safely

and easily• Audible alarm, earphone included for noisy environments• 20-inch flexible probe is the longest usable length in the industry• Three operational status LEDs• Largest battery capacity in the industry, 30 hours full power

continuous operation

COMBUSTIBLE GAS DETECTOR

500

501M1590E

Features:• Functions both as a combustion and emissions

analyzer• Visual indicator - 1 LED (variable frequency)• Audible indicator - audible ticking rate• Two sensitivity levels aids in pinpointing leak

detection• Automatic calibration• Sensor error and low battery

indications• Low power, metal oxide, plug-in

sensor• 12” self-storing flexible probe• 14 hour battery life on easily

replaced alkaline batteries• UL-listed intrinsically safe

COMBUSTIBLE GAS LEAK DETECTOR


19-7075 Combustible Gas Leak Detector $259.00

Specifications:Sensitivity: High: 5 ppm; Low: 50 ppmIndicators: Visual: 1 variable frequency LED;

Audible: Variable rate ticking sound;Ready Condition: Flashing green;Power On: Flashing green; Power Off: Solid red

Warm-up Time: 60 secondsAlarm: Audible at 50 ppmCalibration: Automatic at power onPower Supply: 4 x “AA” alkaline batteries (included)Battery Life: 14 hoursDimensions: 6 x 2 x 1.5" (153 x 50 x 38mm)Weight: 6 oz (0.17kg)


CO-PROBE Carbon Monoxide Meter $325.00GA-SPAK Motorized Sampling Pump Kit $430.00CO-AK1 Manual Aspirator Kit $119.00SR-M2FL Carbon Monoxide Sensor $149.00CO-CASE1 Carrying Case $45.00

CARBON MONOXIDE METERFeatures:• Measure CO levels from 0 to 1,000 ppm• Frequency of the beeper tone increases

with the concentration of CO• Stabilized electrochemical CO

specific sensor• Typical three year sensor life, one year

calibration cycle• One-button operation• Stores and displays maximum CO levels

(MAX HOLD)• CO level beeper can be silenced if

desired• Automatic sensor zeroing and self-test

sequence upon startup• Simple, automatic calibration procedure• Display backlight activates automatically

in low light conditions• Automatic power-off after 20 minutes

extends battery life• Easy-to-replace 9V battery

Specifications:Measuring Range: 0 to 1,000 ppmDisplay: Alphanumeric LCD shows ppm readout;

Records and displays maximum CO exposureon demand; automatic backlight

Tests: Automatically verifies sensor integrity on acti-vation; continuously monitors battery level

Housing: Shock-resistant ABS enclosurePower Supply: 9V batteryBattery Life: 500 hours typicalDimensions: 1.75 x 2.0 x 7.0" (45 x 50 x 180mm)Weight: 5.2 oz (147g)

502 M1084E


450/C Carbon Monoxide Monitor $563.00

Specifications:Range: 0 to 2000 ppmResolution 1 ppmAccuracy: ±3% rdg. ± accuracy of calibration gasResponse Time: <30 seconds to 90% rdg.Operating Conditions: 32 to 104°F (0 to 40°C); 0 to 90% R.H.

non-condensingAdjustments: Zero & Span via keypadAlarms: 2 alarms, audible & visualPower Supply: 9V alkaline batteryBattery Life: 500 hours typicalCase Material: Anodized aluminum w/ plastic end capsSensor Type: Field replaceable electrochemical cellSensor Life: 2 years min.Dimensions: 6.8 x 2.8 x 0.9" (172.7 x 71.1 x 22.9cm)

Convenient to use and simpleto calibrate, the Series 450/CCarbon Monoxide Monitor pro-vides a simple and cost effec-tive solution for monitoring toxiccarbon monoxide gas in ambi-ent air. A unique beacon of lightflashes in correspondence tothe level of carbon monoxideconcentration detected in theair (along with an audiblealarm) instantly alerting theuser to the presence of carbonmonoxide. Quick air qualitychecks are easy and hand-free- just walk through a buildingusing the CO Monitor.

The Series 450/C CarbonMonoxide Monitor is ideal forindustrial and commercialHVAC applications such as furnace and hot water heaterinspection, and residentialHVAC applications such aschimney, oven and appliancemonitoring. The battery pow-ered unit measures carbonmonoxide levels of 0 to 2000

CARBON MONOXIDE MONITORppm and units are housed in an extremely rugged aluminum cas-ing. The sensor maintains a 3% reading accuracy with aresponse time of less than 30 seconds. Raised keypads allow forsimple access to functions such as zeroing and instrument cali-bration, peak readings, reading storage and backlighting the dis-play for use in dark locations.


8500A Carbon Monoxide Analyzer $629.008501 Replacement Filter $14.008502 Probe Assembly w/ Hose & Filter $49.008503 Carrying Case $42.008504 Zero Adjustment Screwdriver $5.00

Specifications:Range: 0 to 1999 ppmResolution: 1 ppmAccuracy: ±5% of readingSensor Type Electrochemical (specific to CO)Sensor Life: 2 - 3 years typicallyResponse Time: 30 - 40 secondsPower Supply: 6VDC, 4 "AA" cell batteriesBattery Life: 6 hrs. continuous use (w/o backlight)Dimensions: Meter: 8 x 4.25 x 2" (20.3 x 10.8 x 5.1 mm)

Probe: 15" (37.5cm) long w/ 5' (1.5m) hoseWeight: 1 lb. 11 oz. (770 g)

A professional grade service tool for accurate measurements ofCarbon Monoxide (CO), the 8500 is designed for contractorstesting for safety in ambient and/or HVAC systems, and appli-ances. A large, backlit LCD will indicate levels from 1 to 1999ppm. Rapid response and high accuracy combine with conven-ient design to provide a reliable and dependable diagnostic tool.

CARBON MONOXIDE ANALYZERFeatures:• LCD readout displays 1 to

1999 ppm• Backlit display for low

light areas• Proven electrochemical

cell technology• Rapid warm-up• High efficiency sample

draw pump• 15" (37.5cm) stainless

steel flue probe with 5 ft. (1.5m) hose and particulate/moisture filter

• Overrange and low battery indications

• Carrying case with shoulder strap and belt loop

503M1619E

OZONE MONITOR

FLAMMABLE GAS LEAK DETECTOR

CARBON MONOXIDE METER

Features:• Small size and high sensitivity due to HMOS (heated metal

oxide semiconductor) sensor• Digital readout in 0.01 increments• Indoor range: < .10 ppm; Outdoor range: Up to 10 ppm for

short periods of time• Sensitivity as low as 0.02 ppm• Linearity ±0.05 ppm• Very simple operation• Automatic zeroing• Ease of calibration and service• Warms up in minutes, responds in seconds• Rechargeable batteries last more than 7 hours• Dimensions: 2" x 4" x 1" (50 x 100 x 25 mm)• Weight: 5 oz. (142 g)• Includes carrying case and charger


A-21ZX Ozone Monitor $1388.00


CO-180 Carbon Monoxide Meter $250.00


GD-3000 Flammable Gas Leak Detector $95.00

This portable ozone sensorprovides a reliable and inex-pensive way of checking gen-erators, valves, piping and gen-eral environments for ozoneleaks and for estimating ozonelevels. It can be used as a per-manent monitor indoors orused outdoor for short periodsof time.

Features:• Highly accurate with fast response time• Measuring range from 1 to 1000 ppm with a 1 ppm resolution• ±5% or ±10 ppm basic accuracy (whichever is greater)• Max, Data hold and Auto shut off• Utilizes a stabilized electrochemical gas specific fast response

sensor• Audible alarm starts at 35ppm• Backlight LCD display• Dimensions/Weight: 160 x 56 x 40mm / 180g• Complete with 9V battery and carrying case

Features:• Detectable gases: Natural gas and Propane/Butane• Conforms to the National and European guidelines• Optimal operating temperature/humidity: -10 to 50°C, 95%RH or

lower• Operates on two 1.5V "AAA" batteries• Batteries provide 4 hours of continuous use• Dimensions/Weight: 164 x 21mm / 25g

REFRIGERANT/COMBUSTIBLE GAS DETECTOR

M2601E504

Features:• One instrument, two functions!• Interchangeable sensor tips can be switched in seconds• Microprocessor controlled circuitry guarantees accuracy and

reliability• Automatically adjusts sensitivity even in high background

refrigerant levels• Infinite sensitivity settings...no adjustment necessary• Heated triode sensor is the most sensitive in the industry

at less than 0.25 oz/yr• Combustible gas sensor sensitivity at 500 ppm

(Methane)• Flashing probe tip increases/decreases in

frequency indicating relative gas concen-tration

• Loud, audible tick rate with mutefeature

• Dual LED display allows visualconfirmation no matter whatposition the instrument is in

• Hydrophobic filter preventssensor moisture contamination

• Optional rubber boot withhole for MagLite® allows forone-handed operation

• Meets or exceeds SAE J1627for 134a and R12

• Met lab certified to UL913,intrinsically safe for use in Class I, Div. 1, Groups C and D

• Will locate many halogens including CFC, HCFC, HFC andblends

• Detects scores of hydrocarbon gases• Ergonomically designed and lightweight, fits right in your hand• Responds in 2/10 of a second

With the Informant 2, you candetect the toughest leaks more effectively

thanks to its unique design. The Informant 2 includesa 20" probe that can be wrapped around the instrument and

used as a 3" probe, which allows you to find hard to reach leaksources quickly and easily. The probe end is tapered to a 0.2"diameter so you can get in between coils and fittings and gaineasy access to other hard to reach areas.A brushless fan mount-ed at the base of the probe draws the sample through the sensorensuring a fast response. The Informant 2 automatically focuseson and isolates a leak source even when high levels of back-ground vapors or refrigerant are present.The Informant 2 also features an audible indicator with a muteoption, as well as three visual leak indicators. LEDs light up insequence to show an increasing concentration of refrigerant orgas which can be seen from any position. And, a flashing light atthe tip of the probe prevents you from ever having to take youreyes off of your sampling location. These indicators are effectivein direct sunlight and when in the presence of significant back-ground noise.

Specifications:Sensing Elements: Refrigerant: Heated diode;

Combustibles: Patented semiconductor type. Plug-in replacement. 5-year life.

Refrigerants Detected: All CFC & HCFC refrigerants containing Chlorine, Fluorine, R134a, R12, R22, R123

Combustible Gases All combustible gases covered by Class I,Detected: Div. 1, Groups C & D

Alarm Sensitivity: Refrigerant: 0.25 oz/yr of R134a (hardest to detect refrigerant)Combustibles: Min. 50 ppm (Methane)

Alarm Types: Audible and visual LEDsWarm-up Time: 10 secondsResponse Time: 2/10 secondPower Supply: 4 "AA" alkaline batteriesBattery Life: 4 to 5 hours of continuous operationDimensions: 1.75 x 9.75 x 2.4" (4.44 x 24.76 x 6.1 cm)Probe Dimensions: 20" (50.8 cm) fully extended; 3" (7.62 cm)

if wrappedWeight: 0.6 lb. (302.5 g)

Model Description Price19-8042 Refrigerant/Combustible Gas Detector Kit $621.00

w/ refrigerant & combustible gas sensors, colour-coded probe tips, instruction manual,

batteries, soft carrying case & one container of refrigerant check gas

19-8045 Deluxe Refrigerant/Combustible Gas $737.00Detector Kit w/ same items as above, plus

protective rubber boot & Maglite®,all packaged in a hard carrying case

19-8041 Combustible Gas Detector, w batteries $526.00instruction manual & soft carrying case

19-8044 Deluxe Combustible Gas Detector Kit $627.00w/ same items as above, plus

protective rubber boot & Maglite®,all packaged in a hard carrying case

19-8046 Refrigerant Upgrade, incl. refrigerant sensor, $125.00probe tip & one container of refrigerant check gas

19-0499 Replacement Combustible Gas Sensor $55.0019-0510 Replacement Refrigerant Sensor $55.0019-0509 Replacement filters (5/pack) $8.0019-0497 Protective Rubber Boot $43.0019-0496 Replacement Check Gas $38.00

Sensor Gas Range Price

580-101-200 Oxygen 0 - 25.0% vol $204.00580-102-221 Carbon Monoxide 0 - 250 - 2000 ppm $362.00580-103-222 Hydrogen Sulphide 0 - 250 - 1000 ppm $362.00580-104-223 Sulphur Dioxide 0 - 50 - 500 ppm $472.00580-106-225 Nitric Oxide 0 - 250 - 1500 ppm $472.00580-107-226 Nitrogen Dioxide 0 - 50 - 250 ppm $472.00580-108-227 Chlorine 0 - 25 - 250 ppm $472.00580-109-228 Hydrogen 0 - 250 - 2000 ppm $472.00Any two may be added to the standard multigas sensor

HAZARDOUS GAS DETECTORS

M2505E

Specifications: Multigas Multigas Sensors' Precalibrated Gas List

Get a firm grip on dangerous gas exposure with the uniqueMultigas sensing technology of the Logic 250 Series. The multi-gas sensor is calibrated to 28 different industrial combustiblegases and vapors. The oxygen sensor is essential for confinedspace entry and rescue applications and the carbon monoxidesensor is ideal for overhaul evaluation. Gas levels can be pro-grammed to either read all, or hold on any one sensor. There is adedicated LED for each sensor; green indicates a gas warninglevel and red, its alarm concentration. Gas data can be stored intwo different formats. Choose from incident or interval formatswhere atmospheric levels are automatically stored at preset timeintervals. Data can be stored and downloaded for up to 1300intervals. Only three simple keys are needed to become fully flu-ent with the many useful features.

505

Sensor Type Metal Oxide General Sensing Diethylamine Gasoline OctaneSemi-conductor Acetone Dimethylamine Hexane Pentane

Range 0-100% LEL Acetylene Ethane Hydrogen PropaneAccuracy ±3% f.s. Aviation Fuel Ethanol M.E.K. PropanolFactory Preset Alarms 10% LEL Benzene Ethyl Acetate Methane Propylene

Butane Ethyl Ether Methanol TolueneButylene Ethylene Napthalene Xylene

Temperature Range 5 to 122°F (-10 to 50°C)Humidity Range 0 to 99% relative humidity, non-condensingDimensions 15.7" x 18.5" x 2.5"Weight 2.2 lbsHazardous Area Rating Intrinsically safe for use in Class 1, Division 1, Groups A, B, C and D areas. UL ApprovedRadio Frequency Protection Readings will not change by more than 5% of full-scale when placed no less than one foot

from a 5-watt radio transmitting on a frequency of 30, 150, or 450 MhzDisplays High intensity LED display and alarm indicatorsBattery Long life load-protected Lead Acid gel-cell pack. Minimum to full charge time: 1.5 - 4 hours

Continuous operating time 8 hoursData Storage INCIDENT: Concentration triggered memory

INTERVAL: Time stamped memorySURVEY: Location specific memory (available with 200 Series only)

Special Features One, two or three sensors available in one detector. Peak atmospheric levels recall, wall mount charging system (120VAC or 12VDC), General Sensing for numerous precalibrated gases, tough, easy to use, and ergonomic design for the workplace.

General Sensing A unique and specialized general response reading designed to detect the very low level presence of a broad range of unknown combustible and toxic atmospheric hazards. Easy to understand readings measure between 0 & 50,000 units to indicate varying concentrations of unknown gases. A useful feature for preemptive action.


950-250-301 Hazardous Gas Detector $3247.00

506 M1610E

SINGLE GAS DETECTORS


GA24XT-H H2S Gas Detector $245.00GA24XT-M CO Gas Detector $245.00GA24XT-S SO2 Gas Detector $505.00GA24XT-X O2 Gas Detector $320.00GA-TS02 Automatic Test Station $895.00GA-HC-1 Hard Hat Clip $20.00GA-AG-1 Non-conductive Alligator Clip $18.00GA-NS-1 Neck Strap w/ safety release $15.00GA-USB1 Infrared USB Adapter Kit $300.00GPR-PRINTER Infrared Printer $450.00GA-TC-1 Test Cap & Hose $15.00

Features:• Two years of protection with zero maintenance costs• Continuous, alphanumeric, status LCD shows detector life

remaining, alarm setpoints, and advises self-test status• Records and displays peak alarm encountered and the time

elapsed since the exposure occurred• Automatic event logging records 10 most recent alarm events

that can be downloaded via infrared port• Two alarm levels (low/high)• Low and high setpoints displayed on demand in ppm or %• Provides typical 95 dB tone and bright, quad-LED indication on

alarm• Internal vibrator alarm• Full-function self-test of audible/visual alarms, plus integrity of

sensor, battery and circuitry• Continuously ON - one-button activation, test and data trans-

mission• Maintenance free - no sensor or battery replacement, no cali-

bration, no downtime• Rugged, IP-66/67 highly water-resistant design• Built-in concussion-proof boot• Comes complete with rugged, stainless steel alligator belt clip

and test cap

Specifications:Sensor: Electrochemical cell (temperature compensated)Operational Life: 2 years Setpoints: Two, high and low, alarm setpointsAlarms: Visual: Flashing wide-angled alarm lens with

red quad-LEDs, plus flashing alarm icon;Audible: Pulsing, high output siren, 95 dB at 1 ft. (0.3m) typical; Vibrator: Internal; Failure, self-test pass and end of life alarms

Event Logging: Records and transmits up to 10 gas alarm events

Tests: Full function self-test on activation and on demand; automatic battery test every 2 hours

Display: Life remaining continuously displayed in months, then days, then hours; Alarm setpointsdisplayed on demand in ppm or %; Records and displays peak alarm exposure and time elapsed (up to 24 hrs.); Advises to “TEST” andthat self-test was passed

Housing: Rugged composite material with integral concussion-proof boot

EMI/RFI: Complies with EMC directive 89/336/EECIngress Protection:IP 66/67Power Supply: Non-replaceable lithium batteryBattery Life: 2 years from activation given 3-5 minutes of

alarm per day Dimensions: 1.1 x 2.0 x 3.2" (28 x 50 x 81mm)Weight: 2.7 oz (76g)

The GasAlertClip Extreme offers extreme protection and durabili-ty at an extreme value. Simply press the START button and the GasAlertClip Extreme isready to use, providing two years of continuous, maintenance-free operation from the day of activation.The GasAlertClip Extreme is equipped with two alarm setpointsused to activate a high output 95dB audible alarm, a bright, wide-angled quad LED visual alarm and a built-in vibrator alarm.Simply clip the GasAlertClip Extreme to your lapel, pocket, belt orhard-hat for unequalled, cost-effective protection.

Gas Monitored H2S CO SO2 O2

Sensor Range: 0-100 ppm 0-300 ppm 0-100 ppm 0-30.0% by vol.Low Alarm: 10 ppm 35 ppm 5 ppm 19.5%High Alarm: 15 ppm 200 ppm 10 ppm 23.5%Operating Temp.: -40/122°F -22/122°F -22/122°F -4/122°F

(-40/50°C) (-30/50°C) (-30/50°C) (-20/50°C)Calibration: Not requiredNot requiredNot required Self-calibrating

Specifications:

507M1613E



GA100-H 100-day H2S Gas Detector $179.00

GA100-M 100-day CO Gas Detector $179.00GA-HC-1 Hard Hat Clip $20.00


GA-W Combustible Gas Detector, 0 to 100% LEL $650.00GAA-W Gas Detector w/ Internal Vibrator $725.00

Features:• 100 days of protection

with no maintenancecosts - ideal for shortterm projects

• Continuous alphanumericLCD shows detector liferemaining, alarm set-points and advises self-test status

• Records and displays thepeak alarm encounteredand the time elapsed sincethe event occurred

• Confidence LCD displayadvises instrument is on andfunctioning

• Two alarm levels (Low/High)• Provides a 95 dB tone• Wide angled visual alarm bar

visible from all angles• Maintenance free - no sensor or

battery replacement, no calibration, no downtime

• Full function self-test of audible/visual alarms plus integrity ofbattery and circuitry

• Continuously ON - one button activation and test• Superior RFI protection• High-tension stainless steel pocket/belt clip

Sensor: Electrochemical cell (temp. compensated)Alarms: Visual: Flashing wide-angled alarm lens with

dual red LEDs, plus alarm LCD readout;Audible: High output, variable, pulsing, 95 dB at 1 ft. (0.3m); Failure, self-test pass and end of life alarms

Tests: Automatic full function self-test on activation and on demand; battery test every two hours

Display: Records and displays peak alarm exposure and time elapsed; Displays alarm setpoints on demand in ppm; Continuously displays life remaining in days and then hours

Housing: Impact-resistant ABS enclosurePower Supply: Non-replaceable lithium batteryBattery Life: 100 daysDimensions: 1.0 x 1.45 x 2.3" (26 x 37 x 58mm)Weight: 1 oz (30g)

Gas Monitored H2S COSensor Range: 0-100 ppm 0-300 ppmLow Alarm: 10 ppm 35 ppmHigh Alarm: 15 ppm 200 ppmOperating Temp. -22/113°F (-30/45°C) 5/113°F (-15/45°C)

Specifications:

COMBUSTIBLE GAS DETECTORSFeatures:• Continuous LCD shows real-

time gas concentration withbacklight in low light (auto); inalarm (auto) and on demand

• Provides 90 dB tone and brightLED indication on alarm

• Available with internal vibratingalarm

• Simple, automatic calibrationprocedure

• Peak value displayed on com-mand in % LEL

• Low and High alarms withadjustable setpoint

• Over limit alarm and sensor pro-tection

• Field options include: Pass CodeProtection, Latching High Alarmand Confidence Beep

• Equipped with a plug-in replaceablesensor

• Powered by an integral rechargeable lithium battery• Intrinsically safe to US and Canadian standards• Full function self-test of sensor, battery and circuitry integrity;

and audible/visual alarms• Pocket/belt clip, test cap and hose, battery, charger and

instructions

Specifications:Measuring Range: 0 to 100 % LELAlarm Levels: Low: 10% LEL; High 20% LELOver Range: 100% LELCalibration: Automatic with auto zeroSensor: Catalytic bead, poison resistantAlarms: Visual: Wide-angled alarm lens plus alarm

LCD readout; Audible: High output, pulsing, 90 dB at 1 ft. (0.3m); Over limit, low battery, off warning and sensor fail alarms; Confidencebeep every 5 seconds (field selectable)

Tests: Automatic full function self-test on activation (auto); continuous battery test (auto)

Display: Continuous display of gas concentration pres-ent; Records and displays peak alarm expo-sure on demand; Displays alarm setpoints on activation (auto) and on demand

Housing: Impact-resistant ABS enclosurePower Supply: Rechargeable lithium ion batteryBattery Life: Up to 14 hours per charge; 500 to 600 chargesDimensions: 1.5 x 2.0 x 3.75" (38.5 x 50 x 95mm)Weight: 4.3 oz (131g)

508 M1611E



GA-H H2S Gas Detector $475.00GA-M CO Gas Detector $475.00GA-S SO2 Gas Detector $660.00GA-C Cl2 Gas Detector $660.00GA-Z HCN Gas Detector $660.00GA-D NO2 Gas Detector $660.00GA-A NH3 Gas Detector $660.00GA-P PH3 Gas Detector $660.00GA-2X O2 Gas Detector $475.00GA-HC-1 Hard Hat Clip $20.00GA-AG-1 Alligator Clip $18.00


PS-RH04S H2S Replacement Sensor $273.00PS-RM04 CO Replacement Sensor $286.00PS-RS04 SO2 Replacement Sensor $386.00PS-RC10 Cl2 Replacement Sensor $386.00PS-RZ10 HCN Replacement Sensor $371.00PS-RD04 NO2 Replacement Sensor $386.00SR-A04 NH3 Replacement Sensor $386.00SR-X10 PH3 Replacement Sensor $180.00SR-P04 O2 Replacement Sensor $386.00GA-BALERT Concussion-proof Boot $38.00GA-SS Sensor Screen (kit of 10) $12.00

Features:• Continuous LCD shows

real-time gas concen-tration with backlight in low light (auto); inalarm (auto) and ondemand

• Provides 90 dB toneand bright LED indica-tion on alarm

• Equipped with plug-inreplaceable sensor

• Simple auto-zero andcalibration procedure

• Peak value displayed on command (in ppm or %LEL)

• Low, High, TWA andSTEL alarms withadjustable setpoints

• TWA (time weighted aver-age) values are recordedand displayed to evaluatethe cumulative exposuredanger and to aid regula-tory compliance

• Available with internalvibrating alarm

• Full-function self-test of sensor battery, circuitry integrity andaudible/visual alarms

• 3-year battery life (9,000 hours)• Classified intrinsically safe by UL to US and Canadian

standards; Cenelec certified• Pocket/belt clip, test cap and hose, and instructions included

Specifications:Sensor: Plug-in electrochemical cellAlarms: Visual: Flashing wide-angled alarm lens with

dual red LEDs, plus alarm LCD readout;Audible: High output, pulsing, 90 dB at 1 ft. (0.3m) typical; Optional internal vibrator; Confidence beep, low battery, off warning and sensor fail alarms

Tests: Automatic full function self-test on activation; continuous battery test

Display: Continuously displays gas concentration present in ppm or %; Records and displays TWA and STEL in ppm or % on demand; Records and displays peak exposure in ppm or% on demand; Displays setpoints automaticallyon activation or on demand in ppm or %

Calibration: Automatic with auto zeroHousing: Impact-resistant ABS enclosureEMI/RFI: Complies with EMC directive 89/336/EECPower Supply: 3V lithium batteryBattery Life: 3 years (9,000 hours) Dimensions: 1.1 x 2.0 x 3.75" (28 x 50 x 95mm)Weight: 2.9 oz (83g)

The GasAlert is operated by an advanced microcontroller and aplug-in electrochemical sensor and is equipped with high outputaudible/visual alarms. The bright, large LCD shows real-time gasconcentrations and the instrument’s status at all times. Thedetector clearly advises the gas hazard present - Low, High,TWA and STEL gas alarm.The compact, rugged GasAlert is designed with the mostadvanced RFI protection available today. Delivered ready for use,simply clip the instrument to your pocket, belt or hard hat forunequalled protection.

Gas Monitored Measuring Range TWA Alarm STEL Alarm Low Alarm High Alarm Operating Temp.Hydrogen Sulfide (H2S): 0-100 ppm 10 ppm 15 ppm 10 ppm 15 ppm -40 to 50°C/Sulfur Dioxide (SO2): 0-100 ppm 2 ppm 5 ppm 2 ppm 5 ppm -40 to 122°FHydrogen Cyanide (HCN): 0-30.0 ppm 4.7 ppm 10.0 ppm 4.7 ppm 10.0 ppmCarbon Monoxide (CO): 0-999 ppm 35 ppm 200 ppm 35 ppm 200 ppm -30 to 50°C/

-22 to 122°FChlorine (CL2): 0-50.0 ppm 0.5 ppm 1.0 ppm 0.54 ppm 1.0 ppm -20 to 50°C/Nitrogen Dioxide (NO2): 0-99.9 ppm 2.0 ppm 5.0 ppm 2.0 ppm 5.0 ppm -4 to 122°FAmmonia (NH3): 0-100 ppm 25 ppm 35 ppm 25 ppm 50 ppmPhosphine (PH3): 0-5.0 ppm 0.3 ppm 1.0 ppm 1.0 ppm 2.0 ppmOxygen (% by vol.) (O2): 0-30.0% n/a n/a 19.5% 23.5%

509M1626E



GAXT-H-DL H2S Gas Detector w/ Datalogger $650.00GAXT-M-DL CO Gas Detector w/ Datalogger $650.00GAXT-X-DL O2 Gas Detector w/ Datalogger $650.00GAXT-S-DL SO2 Gas Detector w/ Datalogger $780.00GAXT-C-DL Cl2 Gas Detector w/ Datalogger $780.00GAXT-Z-DL HCN Gas Detector w/ Datalogger $780.00GAXT-D-DL NO2 Gas Detector w/ Datalogger $780.00GAXT-A-DL NH3 Gas Detector w/ Datalogger $780.00GAXT-P-DL PH3 Gas Detector w/ Datalogger $780.00GAXT-E-DL ETO Gas Detector w/ Datalogger $780.00GAXT-V-DL ClO2 Gas Detector w/ Datalogger $780.00GAXT-G-DL O3 Gas Detector w/ Datalogger $780.00GAXT-N-DL NO Gas Detector w/ Datalogger $780.00


GAXT-H H2S Gas Detector $395.00GAXT-M CO Gas Detector $395.00GAXT-X O2 Gas Detector $395.00GAXT-S SO2 Gas Detector $525.00GAXT-C Cl2 Gas Detector $525.00GAXT-Z HCN Gas Detector $525.00GAXT-D NO2 Gas Detector $525.00GAXT-A NH3 Gas Detector $525.00GAXT-P PH3 Gas Detector $525.00GAXT-E ETO Gas Detector $525.00GAXT-V ClO2 Gas Detector $525.00GAXT-G O3 Gas Detector $525.00GAXT-N NO Gas Detector $525.00

Features:• Continuous LCD shows real-

time gas concentration withbacklight in low light (auto andon demand) and in alarm(auto)

• Peak value displayed on com-mand (in ppm or % vol.)

• Low, High, TWA and STELalarms with adjustable set-points

• Provides 95 dB tone andbright LED indication on alarm

• Internal vibrator alarm• Full-function self-test of sensor,

battery and circuitry integrity• Plug-in replaceable sensor• Simple auto-zero and calibra-

tion procedure• Classified intrinsically safe by

UL to US and Canadian stan-dards; ATEX certified

• Highly water-resistant with an IP-66/67 fully immersible design

• EMI/RFI resistant housing• Built-in concussion-proof boot• Replaceable 3V camera battery provides up to 2 years of

continuous operation• Comes complete with stainless steel alligator clip, test cap and

hose, battery and instructions

Specifications:Sensor: Plug -in electrochemical cell (temperature

compensated)Alarms: Visual: Flashing wide-angled alarm lens with

4 red LEDs, plus alarm LCD readout; Audible: Pulsing, high output siren, 95dB at 10” (0.25m);Vibrator: In sync with audible and visual alarms;Low battery, off warning and sensor fail indica-tions; confidence beep every 5 seconds

Tests: Full function self-test on activation (auto) andcontinuous battery test (auto)

Display: Continuously displays displays gas concentra-tion present in ppm or %; Alarm setpoints dis-played on demand in ppm or %; Records and displays TWA, STEL and Peak in ppm or % on demand

Event Logging: Records and transmits up to 10 gas alarm events

Housing: Rugged composite material with integral concussion-proof boot

EMI/RFI: Complies with EMC directive 89/336/EECIngress Protection:IP 66/67Power Supply: 3V lithium batteryBattery Life: 2 years Dimensions: 1.1 x 2.0 x 3.75" (28 x 50 x 95mm)Weight: 2.9 oz (82g)DATALOGGING OPTIONSampling Rate: Factory set at 5-second intervals or user-

settable from 1 to 60-second intervalsStorage Capacity:Over 1 month of data at 5-second intervals

Gas Monitored Measuring Range TWA Alarm STEL Alarm Low Alarm High AlarmHydrogen Sulfide (H2S) 0-100 ppm 10 ppm 15 ppm 10 ppm 15 ppmSulfur Dioxide (SO2) 0-100 ppm 2 ppm 5 ppm 2 ppm 5 ppmHydrogen Cyanide (HCN) 0-30.0 ppm 4.7 ppm 10.0 ppm 4.7 ppm 10.0 ppmCarbon Monoxide (CO) 0-999 ppm 35 ppm 200 ppm 35 ppm 200 ppmChlorine (Cl2) 0-50.0 ppm 0.5 ppm 1.0 ppm 0.5 ppm 1.0 ppmNitrogen Dioxide (NO2) 0-99.9 ppm 2.0 ppm 5.0 ppm 2.0 ppm 5.0 ppmAmmonia (NH3) 0-100 ppm 25 ppm 35 ppm 25 ppm 50 ppmPhosphine (PH3) 0-5.0 ppm 0.3 ppm 1.0 ppm 0.3 ppm 1.0 ppmEthylene Oxide (ETO) 0-100 ppm 1 ppm 5 ppm 1 ppm 5 ppmChlorine Dioxide (ClO2) 0-1 ppm 0.1 ppm 0.3 ppm 0.1 ppm 0.3 ppmOzone (O3) 0-1 ppm 0.1 ppm 0.1 ppm 0.1 ppm 0.2 ppmNitric Oxide (NO) 0-250 ppm 25 ppm 25 ppm 25 ppm 25 ppmOxygen (% by vol. O2) 0-30.0% n/a n/a 19.5% 22.5%


954-450-100 Oxygen Monitor $503.00954-450-101 Carbon Monoxide Monitor $621.00954-450-102 Hydrogen Sulfide Monitor $621.00954-450-103 Chlorine Monitor $865.00954-450-104-A Ammonia Monitor $865.00954-450-105 Sulfur Dioxide Monitor $865.00

These portable single gas monitors with alarm and level of con-centration display are the ideal choice for any individual who isexposed to noxious gases or low levels of oxygen. They offercomplete protection in a compact case that clips to any pocket orbelt.These monitors are simple to use, reliable and conform to OSHAstandards. They are supplied with instructions, carrying case, cal-ibration gas and tool, long-life lithium battery, and non-slip rubbersleeve. A vibrating alarm is available as an option.

SINGLE GAS MONITORS

M2310E510

Specifications:Display: High contrast numerical level display &

high intensity LED alarm warning indica-tion & alert buzzer

Sensor Type: ElectrochemicalNormal Sensor Life: Up to 60 monthsRFI Protection: Readings will not change by more than

5% of full scale when placed no lessthan 2 feet from a 5W radio transmittingon a frequency of 30, 150 or 450 MHz

Hazardous Area Rating: Intrinsically safe for use in Class I, Div. 1, Groups A, B, C & D areas

Power Supply: Lithium camera batteryBattery Life: 18 months (non-alarming)Dimensions: 3.65 x 1.7 x 1.1"Weight: 5.5 oz

Options:Gas Alarm Level RangeOxygen 19.5% 0-25% Vol.Carbon Monoxide 35 ppm 0-900 ppmHydrogen Sulfide 10 ppm 0-500 ppmChlorine 0.5ppm 0-90 ppmAmmonia 25 ppm 0-250 ppmSulfur Dioxide 2 ppm 0-100 ppm

Hydrogen Cyanide, Nitrogen Dioxide and Hydrogen Monitorsavailable by special request

Features:• Variety of gas sensors available• Compact, less than 6 oz.• Audible and visual alarm warnings• Optional vibrating alarm• Simple operation• Intrinsically safe and CSA approved• Rugged design• Low maintenance• Reliable and dependable

The innovative Alien Series of single gas detectors incorporates"smart" plug and play sensor technology and provides industryreadings such as PEAKS, TWA and STEL. The Alien's com-pletely modular base can be upgraded after your purchase soyou can later take advantage of datalogging and vibrator featuresthat come standard on higher end models. A PC interface andsoftware are available to provide applications-specific configura-tion changes and the capability to datalog, store and analyzemeasurement data.

SINGLE GAS MONITORS

M1085E 511

Specifications:Models: 470: Base; 475: Base w/vibrator;

480: Base w/ data logging; 485: Base w/ vibrator and data logging

Display: Custom LCD w/ 7-segment number fields

Sensor Type: Electrochemical plug and play sensorsAlarms: LED High/Low (Red/Yellow);

Audible: 94 dB, vibrator for high noise environments

Hazardous Area Rating: Intrinsically safe for use in Class I, Div. 1, Groups A, B, C & D

Power Supply: Disposable lithium batteryBattery Life: 24 months (non-alarming)Dimensions: 3.5 x 2.5 x 1"Weight: 5 oz

Features:• Variety of "smart" plug and play sensors available• Auto calibration for both zero and span adjustments• Peaks and peak time recall• TWA and STEL parameters• Audible and visual alarms• IR port for communications• Water-resistant; water-tight (IP 54)• Rubberized, plastic molding with belt clip• Glow-in-the-dark faceplate• Withstands temperatures to -40°C• Long-lasting lithium battery• Customized LCD with backlight for displaying multiple

measurements• User adjustable settings with optional Know Your Air software• Upgradeable with optional vibrator or data logging• Data logging storage capacity of 60K• Shipped complete with Cal hood and tubing, hex screwdriver,

three sensor filter replacements and manual

Peak Time Audible & Visual Data-Model Peaks Recall STEL TWA Alarms Vibrator logging485 • • • • • • •480 • • • • • •475 • • • • • •470 • • • • •

Gas Range Set Point ResolutionCarbon Monoxide (CO): 0-500 ppm 35 ppm 1 ppmHydrogen Sulfide (H2S): 0-100 ppm 10 ppm 1 ppmOxygen (O2): 0-25% vol. 19.5% or 23% 0.1%Ammonia (NH3): 0-100 ppm 25 ppm 1 ppmSulfur Dioxide (SO2): 0-20 ppm 2 ppm 0.1 ppmOther Sensors Available: Chlorine, Hydrogen cyanide, Nitrogen dioxide,

Hydrogen, Chlorine dioxide, Nitric oxide, Phosphine

Sensor Options:

Replacement Sensors:

Features by Model:

Model Description Price954-470-100 Base Model w/ Oxygen Sensor $621.00954-470-101 Base Model w/ Carbon Monoxide Sensor$778.00954-470-102 Base Model w/ Hydrogen Sulfide Sensor$778.00954-475-101 Model w/ CO Sensor & Vibrator $857.00954-475-102 Model w/ H2S Sensor & Vibrator $857.00954-480-104 Model w/ NH3 Sensor & Data logging $1140.00954-480-105 Model w/ SO2 Sensor & Data logging $1140.00954-485-104 Model w/ NH3 Sensor, Data logging

& Vibrator $1219.00954-485-105 Model w/ SO2 Sensor, Data logging

& Vibrator $1219.00936-030-000A Know Your Air™ Software & Infrared Adapter $219.00930-030-010 Hand Aspirator Assembly $86.00

Model Description Price931-030-100A Oxygen Sensor $236.00931-030-101A Carbon Monoxide Sensor $393.00931-030-102A Hydrogen Sulfide Sensor $393.00931-030-104A Ammonia Sensor $472.00931-030-105A Sulfur Dioxide Sensor $472.00

M2317E

Features:• SafeCheck 100 is a personal single gas monitor

• SafeLog 100 is a datalogging personal single gas monitor

• On-board memory contains sensor specific data

• Automatic sensor recognition

• Simple zero and calibration functions

• Piercing two-tone horn and flashing bright LED alarms

• RFI/EMI resistant

• Powered by a single, user replaceable, 9 volt battery

• Lightweight and extremely rugged impact-resistant ABS housing

• Download via RS-232 interface (SL100 only)

• Supported by QuestSuite™ for Windows software (SL100 only)

PERSONAL GAS MONITOR


GAS MONITOR

SC100-O2 SafeCheck Gas Monitor w/ O2 sensor $843.00SC100-CO SafeCheck Gas Monitor w/ CO sensor $1013.00SC100-H2S SafeCheck Gas Monitor w/ H2S sensor $1013.00SC100-NH3 SafeCheck Gas Monitor w/ NH3 sensor $1276.00SC100-HCN SafeCheck Gas Monitor w/ HCN sensor $1183.00SC100-NO SafeCheck Gas Monitor w/ NO sensor $1183.00SC100-NO2 SafeCheck Gas Monitor w/ NO2 sensor $1183.00SC100-ETO SafeCheck Gas Monitor w/ ETO sensor $1183.00DATALOGGING GAS MONITORSL100-O2 SafeLog Gas Monitor w/ O2 sensor $1183.00SL100-CO SafeLog Gas Monitor w/ CO sensor $1336.00SL100-H2S SafeLog Gas Monitor w/ H2S sensor $1336.00SL100-NH3 SafeLog Gas Monitor w/ NH3 sensor $1446.00SL100-HCN SafeLog Gas Monitor w/ HCN sensor $1404.00SL100-NO SafeLog Gas Monitor w/ NO sensor $1404.00SL100-NO2 SafeLog Gas Monitor w/ NO2 sensor $1404.00SL100-ETO SafeLog Gas Monitor w/ ETO sensor $1404.00ACCESSORIES54-948 Hand Aspirator w/ 10' hose $60.0054-971 Regulator w/ 2' tubing, 0.5 lpm $271.0054-252 Calibration Gas, 25 ppm H2S/100 ppm

CO/2.5% CH4/18% O2 $509.0054-146 Calibration Gas, 25 ppm H2S in Air $261.0054-265 Calibration Gas, 25 ppm NH3 in Air $672.0054-715 Serial/Computer Interface Cable $162.00QS-ONE QuestSuite Master $928.00

Specifications:SENSORGas Range ResolutionOxygen (O2) 0-30% 0.1%Carbon Monoxide (CO) 0-999 ppm 1 ppmHydrogen Sulfide (H2S) 0-500 ppm 1 ppmChlorine (Cl2) 0-20 ppm 0.1 ppmHydrogen Cyanide (HCN) 0-50 ppm 0.1 ppmAmmonia (NH3) 0-50 ppm 1 ppmSulphur Dioxide (SO2) 0-50 ppm 0.1 ppmNitric Oxide (NO) 0-100 ppm 0.1 ppmNitrogen Dioxide (NO2) 0-50 ppm 0.1 ppmEthylene Oxide (ETO) 0-20 ppm 0.1 ppmGENERALOperating Temp.: -10 to 40°C (14 to 140°F)Alarms: Pulsating dual tone and flashing LED;

Remote alarm jackDimensions: 4.5 x 3.0 x 1.5" (11.4 x 7.6 x 3.8 cm)Weight: 8.8 oz (250 g)Ratings: Ingress Protection: Certified to IP54;

Intrinsic Safety: UL, Class I, II & III, Div.1 Group A thru G, EEx

512

The SafeCheck 100 is an extremely rugged, lightweight personalgas monitor. The SafeLog 100 is a rugged, lightweight personalsingle gas datalogging monitor. Designed for today's demandingenvironments, both of these units feature large four digit displayswith backlight and pulsating warning horn and visual alarms.

Features:• Houses up to five interchangeable "Smart" plug and play

sensors• Large LCD with simultaneous, real-time gas detection readings• 103 dB @ 1 ft. alarm• Pump or diffusion air sampling methods• Quick change alkaline or rechargeable Nickel Metal Hydride

battery pack• Up to 28 hours battery run time• Simple 3-button operation• Handy glow-in-the-dark feature• Ergonomic, high impact case with integral rubber boot• Peaks and peak time recall• TWA and STEL parameters• Water resistant• IR port for PC communications• Capability of storing up to 100K worth of data• User adjustable detector settings with Know Your Air software

(compatible with Windows® 95, 98, 2000 and NT)• Standard accessories include: Cal/pump hood, cal tubing, three

sensor filter replacements, Quick Start guide, Know Your Air™

PC software, hydrophobic replacement filters and 16 ft. tubingfor pump models, one NiMH battery pack and charger adapter(XP models), one alkaline battery pack (X models)

Specifications:Display: LCD w/ designated line for each sensor

readingAlarms/Indicators: LED High/Low; Audible: 103 dB @ 1ft.Sensors: Electrochemical, catalytic beadOperating Conditions: -4 to 122°F (-40 to 50°C); 15 to 90% RHHazardous Area Intrinsically safe; Class 1, Div. 1,

Rating: Groups A, B, C & DPower Supply: Alkaline (AA) batteries or rechargeable

NiMhBattery Life: Alkaline: 28 hrs. (diffusion); 16 hrs. (w/ pump)

NiMh: 22 hrs. (diffusion); 12 hrs. (w/ pump)Dimensions: 5.94 x 5.2 x 2.8"Weight: 22.9 oz

M1099E 513

Gas Set Point Range ResolutionCarbon Monoxide (CO): 35 ppm 0-500 ppm 1 ppmHydrogen Sulfide (H2S): 10 ppm 0-100 ppm 1 ppmCombustible (LEL): 10% LEL 0-100% LEL 1% LELOxygen (O2): 19.5% or 23% 0-25% 0.1%Other Sensors Available: Nitric oxide, Nitrogen dioxide, Sulfur dioxide,

Chlorine, Ammonia, Hydrogen, Hydrogen cyanide, Chlorine dioxide

Sensor Options:

MULTI-GAS MONITORS

Replacement Sensors:

Model Description PriceX100-MABCZ Model w/ AA battery,

LEL/O2/CO/H2S Sensors $2358.00X101-MABCZ Model w/ Internal pump, AA battery,

LEL/O2/CO/H2S Sensors $2673.00XP100-MABCZ Model w/ NiMH battery,

LEL/O2/CO/H2S Sensors $2508.00XP101-MABZZ Model w/ Internal pump, NiMH battery,

LEL/O2/CO Sensors $2665.00XP101-MACZZ Model w/ Internal pump, NiMH battery,

LEL/O2/H2S Sensors $2665.00XP101-MABCZ Model w/ Internal pump, NiMH battery,

LEL/O2/CO/H2S Sensors $2822.00671-034-000 Infrared PC Adapter Pad $140.00930-020-003 Sampling Probe w/ Rigid Tubing $197.00936-000-004 Vehicle Wiring Kit $47.00

Model Description Price931-020-990C Blank Sensor $118.00931-021-100C Oxygen Sensor $236.00931-021-101C Carbon Monoxide Sensor $393.00954-021-102C Hydrogen Sulfide Sensor $393.00954-020-100C Combustibles Sensor $393.00

514 M1614E

MULTI-GAS DETECTORS


GAMIC-4 4-Gas Detector, H2S, CO, O2, LEL $995.00GAMIC-3H 3-Gas Detector, H2S, O2, LEL $895.00GAMIC-3M 3-Gas Detector, CO, O2, LEL $895.00GAMIC-3S 3-Gas Detector, SO2, O2, LEL $995.00GAMIC-2 2-Gas Detector, O2, LEL $795.00GAMIC-2HW 2-Gas Detector, H2S, LEL $870.00GAMIC-4-DL2 4-Gas Detector w/ Data Logger $1145.00GAMIC-3H-DL2 3-Gas Detector w/ Data Logger $1045.00GAMIC-3M-DL2 3-Gas Detector w/ Data Logger $1045.00GAMIC-3S-DL2 3-Gas Detector w/ Data Logger $1145.00GAMIC-2-DL2 2-Gas Detector w/ Data Logger $945.00GAMIC-2HW-DL2 2-Gas Detector w/ Data Logger $1020.00GAMIC-C01-K Four NiMH Rechargeable Batteries $60.00

w/ 4-port charger kitD4-AS01 Aspirator Pump w/ 10 ft. (3m) hose $109.00GA-SPAK Motorized Sampling Pump Kit $430.00MMC64 64 MB Multi Media Card $120.00CR-MMC-USB1 MMC Reader (USB port) $85.00CK-Q34-4 4-Gas Calibration Kit w/ 34L cylinder $680.00CK-Q58-4 4-Gas Calibration Kit w/ 58L cylinder $760.00CG-BUMP1 Alarm Test Gas, 11L $80.00

Features:• Monitors 2, 3 or 4 hazardous gases simultaneously and contin-

uously, combustibles, oxygen (deficiency/enrichment), hydro-gen sulfide and carbon monoxide

• Combustible gas selection: 0 to 100% LEL or 0 to 5.0%methane

• Large high contrast LCD shows real-time gas concentrations• Records and displays exposures on command: TWA (time-

weighted average), STEL (short-term exposure levels), andmaximum gas exposures

• Four levels of alarm: instant Low, instant High, TWA and STEL• Triple alarm system: dual visual alarm bars; high-output 95 dB

audible alarm; internal vibrator alarm for high noise areas• Single pushbutton operation• Replaceable plug-in sensors• Automatic sensor calibration• Auto zero the sensors at any time without calibration gas• Backlight in low light (auto); in alarm (auto) and on demand• Automatic full-function self-test of sensor, battery, circuitry

integrity and audible/visual alarms on activation• Powered by disposable alkaline batteries or rechargeable NiMH

batteries• Unobtrusive and convenient battery replacement• Low battery warning provides a 30 minute alert• User field options: confidence beep, pass code protection, safe

display mode, latched gas alarms and combustibles selection• Classified intrinsically safe by UL to US and Canadian

standards• Datalogging models include 32 MB flash MMC data storage card• Water and dust resistant, designed to withstand a 6 ft (2m) drop• Delivered ready for use with sensors, two AA alkaline batteries,

stainless steel alligator belt clip, calibration cap with hose andinstructions

• User downloadable datalogger option includes 32 MB MMCflash memory card and software

Specifications:Measuring Range: H2S: 0 to 100 ppm; CO: 0 to 500 ppm;

O2: 0 to 25% by vol.; Combustibles: 0 to 100%LEL or 0 to 5.0% methane

Sensor: Plug-in electrochemical cells (H2S/CO Twin Tox,O2); catalytic bead (LEL)

Alarms: Visual: two flashing alarm bars, plus gas and alarm level LCD readout; Audible: High out-put, variable pulsed dual beepers, 95 dB at 1 ft. (0.3m); Instant Low and instant High alarms for all gases; TWA and STEL alarms for toxic gases (H2S and CO); Low battery andsensor missing alarms; vibrator pulses in all alarm conditions and status alarms

Tests: Automatic full function self-test on activation; continuous battery test (auto)

Display: Continuously displays gas concentration present; Records STEL and TWA exposures and displays readings on demand; Records peak exposure and displays on demand; dis-plays setpoints on activation

Calibration: Automatic with auto zeroHousing: Composite material with concussion-proof bootEMI/RFI: Complies with EMC directive 89/336/EECPower Supply: Two “AA” alkaline batteries or NiMH recharge-

able batteriesBattery Life: 16 to 18 hours on alkaline batteries;

14 to 16 hours on NiMH rechargeable batteriesDimensions: 2.4 x 4.0 x 1.3" (60 x 100 x 33mm)Weight: 7.4 oz (211g)DATALOGGER OPTIONSSampling Rate: Field settable sampling intervals from 1 to 127

seconds (factory set at 5 seconds)Storage Capacity: 500,000 records (4.4 months at sample rate

of 5 seconds and 32 MB MMC)Memory Type: Wraparound memory ensures most recent

data is saved

515M1615E

GAS DETECTOR CALIBRATION/TEST STATION


GAMIC-DOCK-1 Basic MicroDock System, includes $2995.00base station, one GasAlertMicro docking

module, 110-240V universal power adapter,32 MB MMC, Excel Datalog Manager software,

USB connector cable, fresh air inlet filter, four C-cell batteries, two 2 ft. (0.6m) calibration

gas hoses, two gas cylinder inlet fittings and instructions

GAMIC-DOCK-2 MicroDock System Kit, includes $3895.00Basic MicroDock System components, plus

34L quad calibration gas cylinder, demand flowregulator, all in a hard carrying case

GAMIC-DOCK-3 MicroDock System Dual Module Kit, $5395.00includes Basic MicroDock System componentswith one additional docking module, plus 58Lquad calibration gas cylinder, demand flowregulator, all in a heavy-duty carrying case

GAMIC-MOD GasAlertMicro Docking Module $750.00REG-DF-1 Demand Flow Regulator $490.00CG-Q34-4 Quad Calibration Gas (34L cylinder) $280.00CG-Q58-4 Quad Calibration Gas (58L cylinder) $363.00

Features:• Fully automatic “hands-free” calibration and functional bump

test• Automatically verifies performance of audible and visual alarms• Stores and updates calibration records in both the

GasAlertMicro and the MicroDock• Entirely self-contained• No computer required• Fully portable, lightweight and mobile• Operates via line power or four C-cell batteries• Add additional docking modules to system via simple, plug-in

connections• Expandable to include up to 10 GasAlertMicro docking modules

Specifications:Alarms: User-settable audible and visual alarmsTests: Automatic functional bump, calibration and

configuration recognitionDisplay: LED indicators on each docking module:

Yellow = Test; Green = Pass; Red = Fail;LCD on base station: 4 line x 16 characters,wide viewing angle, user selectable backlight

Pump: DC motor, micro-diaphragm; 6V PCB mountFlow Rate: Typically 300 ml/minFlow Sensor: Automatic flow rate adjustmentGas Cylinder Inputs: 2-gas inlets standard; 5-gas inlets maximumGas Connections: 1/8" SMC connect subminiature couplingSolenoid: Built into docking modulesData Storage: Automatic with 32 MB MMCExternal Interface: USB interface for PCCommunications: Two-way infrared between docking module

and GasAlertMicroHousing: Impact resistant ABS (polycarbonate)Power Supply: 6V wall adapter or four C-cell batteriesDimensions: 8.3 x 10.4 x 3.2" (212 x 263 x 82mm)

The MicroDock calibration, test and record storage system pro-vides automated calibration and bump-testing for the GasAlert-Micro multi-gas detector. Expandable to include up to 10 dockingmodules, the MicroDock is the world’s most advanced, compactand affordable automatic calibration and testing system for theultimate confined space gas detector.

516 M1612E

MULTI-GAS DETECTORS


GAMAX3-4 4-Gas Detector, H2S, CO, O2, LEL $1495.00GAMAX3-3H 3-Gas Detector, H2S, O2, LEL $1395.00GAMAX3-2 2-Gas Detector, O2, LEL $1295.00GAMAX3-4-DL1 4-Gas Detector w/ Black Box Logger $1795.00GAMAX3-3H-DL1 3-Gas Detector w/ Black Box Logger $1695.00GAMAX3-2-DL1 2-Gas Detector w/ Black Box Logger $1595.00GAMAX3-4-DL2 4-Gas Detector w/ User-downloadable Logger $1795.00GAMAX3-3H-DL2 3-Gas Detector w/ User-downloadable Logger $1695.00GAMAX3-2-DL2 2-Gas Detector w/ User-downloadable Logger $1595.00


SR-W04 Combustible Replacement Sensor $225.00SR-X10 O2 Replacement Sensor $180.00PS-RH04S H2S Replacement Sensor $273.00CK-Q34-4 4-Gas Calibration Kit w/ 34L cylinder

(LEL, O2, H2S, CO) $680.00CK-Q58-4 4-Gas Calibration Kit w/ 58L cylinder

(LEL, O2, H2S, CO) $760.00CG-BUMP1 Aerosol Alarm Test Gas, 11L

(LEL, O2, H2S, CO) $80.00

Features:• Large high con-

trast LCD showsreal-time gasconcentrationsfor H2S, CO, O2

and %LEL• Equipped with a

high-efficiency,motorized sam-pling pump

• Sampling pumpcalibration isautomatic

• Replaceableplug-in sensors

• Simple and auto-matic calibrationprocedure

• Auto zero thesensors at anytime without cali-bration gas

• Low, High, TWAand Peak alarmswith field-settablesetpoints

• Audible (95 dB)and visual alarms

• Peak value dis-played on command(in ppm or %)

• TWA (time weightedaverage) values arerecorded and displayed in ppm or %

• Backlight in low light (auto); in alarm (auto) and on demand• Automatic full-function self-test of sensor, battery, circuitry

integrity and audible/visual alarms on activation• Classified intrinsically safe by UL to US and Canadian

standards• Powered by VersaPak™ rechargeable battery• Field upgradeable• Datalogging capabilities means all events and occurrences are

recorded, including: sensor readings, alarm setpoints, all alarmconditions, TWA and Peak exposures, calibrations, pump oper-ation, event flags, instrument status and serial number withtime and date

• Two datalogging versions to choose from: black box dataloggerand user-downloadable datalogger

Sensor: Plug-in electrochemical cells (H2S/CO, O2); catalytic bead (LEL)

Alarms: Visual: Flashing wide-angled alarm lens with dual red LEDs, plus alarm LCD readout;Audible: High output, variable, pulsing, 95 dB at 1 ft. (0.3m); Low battery, off warning, sensorfail, multiple gas hazard, and data card fail alarms

Tests: Automatic full function self-test on activation; continuous battery test

Display: Continuously displays gas concentration present in ppm or %; Records and displays TWA and Peak in ppm or % on demand; Displays setpoints automatically on activation or on demand in ppm or %

Calibration: Automatic with auto zeroHousing: Impact-resistant ABS enclosureEMI/RFI: Complies with EMC directive 89/336/EECPower Supply: One 3.6V VersaPak™ rechargeable batteryBattery Life: NiMh up to 12 hours of operation;

NiCd up to 8 hours of operation Dimensions: 1.6 x 3.0 x 5.9" (40 x 75 x 150mm)Weight: 15.4 oz (396g)DATALOGGER OPTIONSSampling Rate: One reading every 5 secondsStorage Capacity:Over 4 months, scalable up to one year.

32MB Flash MMC standard

The GasAlertMax multi-gas detector, with optional dataloggingmonitors, for 2, 3 or 4 hazardous gases simultaneously and con-tinuously monitors combustibles, oxygen (deficiency/enrichment),carbon monoxide and hydrogen sulfide. The compact, lightweightGasAlertMax is the new benchmark in gas detection, setting thestandards for ease of use, reliability and effective protection,using forefront microcontroller and sensor technology.

Gas Monitored H2S CO O2(% by vol.) CombustiblesSensor Range: 0-100 ppm 0-500 ppm 0-30.0% 0-100% LELLow Alarm: 10 ppm 35 ppm 19.5% 10% LELTWA Alarm: 10 ppm 35 ppm n/a n/aHigh Alarm: 15 ppm 200 ppm 23.5% 20% LEL

Specifications:

• GasAlertMax is delivered complete and ready for use with sensors, sampling pump, datalogger, two VersaPak™ batteries,110 VAC 2-port charger, 10 ft. (3m) sampling hose, cal hose, filter kit and instructions

The 600 Series of multigas monitors has everything you need toget the job done, but without the bells and whistles. The supertough rubber boot gives you a dependable nonslip grip while alsoadding impact and shock resistance. The 600 can be configuredwith two, three or four gas sensors and is ready to operate ondemand.

MULTIPLE GAS MONITORS

M1087E 517

Specifications:Display: High contrast LCD w/ backlightSensor Type: Oxygen: electrochemical;

Combustible: catalytic bead;Others: electrochemical

Function Alarms: Low battery, self test, pump flow blockage

Safety Approvals: Class I, Div. 1, Groups A, B, C & DCSA Approvals: Class 2, Div. 1, Groups E, F & G;

Class 3, hazardous locationsPower Supply: Alkaline or rechargeable NiMh batteriesBattery Life w/o Pump: 9-10 hoursBattery Life w Pump: Alkaline: 6-8 hours; NiMh: 8.5 hoursDimensions: 4.8 x 1.8 x 3.0"Weight: 22.9 oz

Sensors Basic Model Price Basic Plus Price Millennium Price(Alkaline) (Rechargeable NiMh) Model

LEL, O2 963-640-100 $1352.00 963-620-400 $1879.00 973-620-700 $2492.00LEL, O2, CO 963-640-203 $1590.00 963-620-503 $2036.00 973-620-803 $2649.00LEL, O2, H2S 963-640-206 $1590.00 963-620-506 $2036.00 973-620-806 $2649.00LEL, O2, CO, H2S 963-640-316 $1667.00 963-620-616 $2193.00 973-620-916 $2807.00UNITS WITH MOTORIZED PUMPLEL, O2 963-641-100 $1824.00 963-621-400 $2193.00 973-621-700 $2807.00LEL, O2, CO 963-641-203 $1981.00 963-621-503 $2351.00 973-621-803 $2964.00LEL, O2, H2S 963-641-206 $1981.00 963-621-506 $2351.00 973-621-806 $2964.00LEL, O2, CO, H2S 963-641-316 $2138.00 963-621-616 $2508.00 973-621-916 $3121.00

Features:• Multiple gas sensors available• Four independent LCD displays for each gas sensor reading• 80 dB @ 1m alarm• Integral pump or diffusion air sampling method• Auto shut-off when pump flow is restricted• Field replaceable pump• Alkaline or rechargeable nickel metal hydride batteries• Rugged ABS composite plastic construction• Protective air pocket rubber boot• Water resistant to protect electronics• Includes air-cushioned rubber protective boot; polished stain-

less steel boot clip, calibration hood and instruction booklet

Gas Sensor Performance:Gas Range Resolution AlarmCombustible 0-100% LEL 1% LEL 10% LELOxygen 0-25% 0.1% Low: 19.5%

High: 23%Carbon Monoxide 0-1500 ppm 1 ppm 35 ppmHydrogen Sulfide 0-250 ppm 0.1 ppm 10 ppm

Model Description PriceD Datalogging Option $370.00

Available as option on Basic Plus or Millennium models only.

GAS DETECTION CONTROLLER

M1807E

Features:• For continuous monitoring and control of toxic gases, combust-

ible gases and oxygen hazards• Mix, match or change the gases monitored• Four channels• Individual, alphanumeric “status” LCD for each channel• Field programmable alarm levels on each channel• Records and displays Peak gas detected on each channel on

demand• Local 85dB audible alarm• Three standard common 10A SPDT relays - low, high and fault

general alarms• Up to 8 additional discrete relays - two per channel for Low and

High alarms. Each channel is programmable for energized/de-energized, latching/non-latching and audible On/Off.

• External reset can be used to reset or cancel all latched alarms• Accepts 20mA signal input from any 4-20mA gas transmitter• Provides 24VDC power to gas sensing transmitter• Auto fuses protect all circuits• Easy to install - simply hang on the wall, connect the power

and gas transmitters• Slim profile, only 2.4” (6.35 cm) deep

Specifications:GENERALAlarms: Two set points, user programmableAudible Alarms: 85dB buzzerOutputs: SPDT relays; 10A @ 110VAC/24VDC,

8A @ 230VACAlarm Relays: Standard: One (1) common low gas alarm,

de-energized, non-latching; One (1) commonhigh gas alarm, de-energized, latching; One (1) common fault alarm, normally de-ener-gized, non-latching. Optional: Two (2) per channel; one (1) low gas and one (1) high gas alarm. Field selectable: energized/de-energized; latching/non-latching; zoning (Park) function and audible alarm On/Off

Display: Four (4) independent, 3-digit alphanumeric status displays. Field selectable readouts for:%LEL, ppm and/or %O2

LED Indicators: Alarms: three (3): “Low” (red), “High” (red), “Fault” (amber); Power: Two (2) “on” AC icon(green), DC icon (green); Gas: Concentrationicons, ppm, %LEL, %O2

Power Supply: Field selectable for 115 & 230VAC or 24VDCAC Input: 115VAC, 50/60 Hz std.; 230VAC, 50/60 HzDC Input: 24VDC (18 to 28 VDC)Backup: Optional battery backup 24VDC supplyAmbient Conditions: -4 to 122°F (-20 to 50°C); 5 to 99% RHEnclosure: Enameled steel, RFI/EMI protected, Nema 12Mounting: Wall mountedWire Terminations: Screw type terminal blockWiring Ports: Seven (7) ea. 3/4”/22mm NPT portsDimensions: 2.4 x 13 x 9.5” (60 x 330 x 240 mm)Weight: 4.85 lb (2.2 kg)

Model Description PriceCR-4000 Four Channel Gas Detection Controller $1450.00CR4-R1000 10A SPDT Lo/Hi Alarm Relays, Ch.1 $150.00CR4-R1200 10A SPDT Lo/Hi Alarm Relays, Ch.1/2 $300.00CR4-R1230 10A SPDT Lo/Hi Alarm Relays, Ch.1/2/3 $450.00CR4-R1234 10A SPDT Lo/Hi Alarm Relays, Ch.1/2/3/4 $600.00CR4-BAT1 Battery Back-up $450.00CR-ALH05 External Audible/Visual Alarm $495.00

518

Specifications:GASES DETECTED/RANGESCombustibles: 0 to 100% LELO2: 0 to 25% volumeCO: 0 to 50, 100, 200, 500, 1000 ppmH2S: 0 to 20, 50, 100, 500 ppmSO2: 0 to 10, 20, 50, 100 ppmNH3: 0 to 50, 100 ppmCl2: 0 to 5.0, 10.0, 100 ppmHCN: 0 to 20.0, 50.0, 100 ppmNO: 0 to 50, 100 ppmNO2: 0 to 10.0 ppm

FIXED GAS MONITORING SYSTEM

M1808E

Specifications:Transmitter: 2-wire, 4-20mA intrinsically safePower Input: 12 to 35 VDC; loop resistance 650Ω @ 24

VDCOutput Current: Normal operation, linear 4-20mACalibrate Mode: Steady 4mA, auto reset to normal operationFault Mode: 3.5mA signalCurrent Draw: 35mA max.Sensor: Plug-in electrochemical cellCalibration: Non-intrusive w/ auto calibrate modeDrift: Zero drift: nominal; Span drift: <10%/yearOperating Temp.: -25 to 35°C (-13 to 86°F): NH3;

-40 to 40°C (-40 to 104°F): H2S;-20 to 40°C (-4 to 104°F): O2 & other toxics

Dimensions: 4.7 x 4.7 x 3” (120 x 120 x 75mm)Weight: 1.65 lb (750 g)

519

Gas Standard Measuring Ranges AvailableModel Detected Accuracy Divs. Units #1 #2 #3 #4 #5 #6 PriceISPR2-DX(#) O2 0.1% 0.1% %v/v 0-25.0% 0-30.0% $975.00ISPR2-DH(#) H2S 0.25 ppm 1 ppm ppm 0-100 0-50 0-500 0-20 0-30 $995.00ISPR2-DM(#) CO 1 ppm 1 ppm ppm 0-500 0-1000 0-100 0-50 0-200 0-600 $995.00ISPR2-DS(#) SO2 0.5 ppm 1 ppm ppm 0-100 0-50 0-20 0-10 $1165.00ISPR2-DA(#) NH3 0.5 ppm 1 ppm ppm 0-50 0-100 0-150 $1165.00ISPR2-DC(#) Cl2 0.1 ppm 0.1 ppm ppm 0-5.0 0-10.0 0-100 $1165.00ISPR2-DV(#) ClO2 0.01 ppm 0.01 ppm ppm 0-5.00 0-1.00 $1165.00ISPR2-DE(#) C2H4O 0.1 ppm 0.1 ppm ppm 0-10.0 0-20.0 0-100 $1295.00ISPR2-DY(#) H2 1 ppm 1 ppm ppm 0-100 0-200 0-800 $1235.00ISPR2-DL(#) HCl 0.1 ppm 0.1 ppm ppm 0-10.0 0-20.0 0-100 $1295.00ISPR2-DZ(#) HCN 0.1 ppm 0.1 ppm ppm 0-20.0 0-50.0 0-100 $1295.00ISPR2-DN(#) NO 0.5 ppm 1 ppm ppm 0-50 0-100 $1295.00ISPR2-DD(#) NO2 0.1 ppm 0.1 ppm ppm 0-10.0 0-20.0 $1235.00

Features:• For continuous monitoring of oxygen or toxic gas hazards in

ambient air• Modular design means you can easily change the gas moni-

tored and/or the measuring range in the field• Encapsulated, plug-in modules provide protection against cor-

rosive environments, moisture invasion and tampering• Direct linear 4-20mA output• Wide supply voltage range: 12 to 35V• Backlit LCD• Low power technology is not capable of igniting in an explosive

atmosphere when it forms part of an intrinsically safe installa-tion

• Calibrate Mode simplifies system start-up and calibration• Timed automatic reset to normal operation that ensures system

integrity• Exterior hinged door for non-intrusive calibration• Rugged NEMA 4 enclosure, RFI/EMI shielded composite mate-

rial, 2-part case with 2 cable ports• Low operating, maintenance and installation costs

M606E

Model Gas to be Measuring Price Model Gas to be Measuring PriceNo. Measured Range (10/pack) No. Measured Range (10/pack)

SD150702 Acetic Acid 1 - 80 ppm $54.00 SD150727 Ethylene Oxide 0.4 - 100 ppm $54.00SD150703 Acetone 0.01 - 2.0% $54.00 SD150728 Ether 0.04 - 1.0% $54.00SD150704 Acetylene 0.1 - 4.0% $54.00 SD150729 Ethyl Mercaptan 0.5 - 120 ppm $54.00SD150705 Ammonia 10 - 1000 ppm $54.00 SD150730 Formaldehyde 2 - 20 ppm $54.00SD150706 Arsine 0.05 - 5 ppm $54.00 SD150731 Gasoline 0.015 - 1.2% $54.00SD150707 Benzine 2.5 - 120 ppm $54.00 SD150732 Hydrocarbons (9 tubes) 0.05 - 2.4% $54.00SD150708 Bromine 2 - 23 ppm $54.00 (propane, butane)SD150709 Butane 25 - 1400 ppm $54.00 SD150733 Hydrogen Chloride 10 - 1000 ppm $54.00SD150710 n-Butyl Acetate 0.01 - 0.8% $54.00 SD150734 Hydrogen Sulfide 12.5 - 500 ppm $54.00SD150711 n-Butyl Alcohol 5 - 150 ppm $54.00 SD150735 LP Gas 0.02 - 0.8% $54.00SD150712 Carbon Dioxide 2.5 - 40% $54.00 SD150736 Methyl Ethyl Ketone 0.4-100 ppm $54.00SD150713 Carbon Dioxide 0.13 - 6% $54.00 SD150737 Nitric Oxide 2 - 20 ppm $54.00SD150714 Carbon Monoxide 1-40 ppm $54.00 SD150738 Nitrogen Dioxide 0.5-100 ppm $54.00SD150715 Carbon Monoxide 0.05 - 4.0% $54.00 SD150739 Oxygen 6 - 24% $54.00SD150716 Carbon Monoxide 5 - 2000 ppm $54.00 SD150740 Ozone 4 - 400 ppm $54.00SD150717 Chlorine 0.25 - 10% $54.00 SD150741 Perchloroethylene 2 - 250 ppm $54.00SD150718 Chlorine 25 - 1000 ppm $54.00 SD150742 Styrene 10 - 1000 ppm $54.00SD150719 Chloroform 4 - 400 ppm $54.00 SD150743 Sulfur Dioxide 20 - 3600 ppm $54.00SD150720 Cyclohexanol 5 - 100 ppm $54.00 SD150744 Toluene 5 - 600 ppm $54.00SD150721 Ethyl Acetate 0.04 - 1.5% $54.00 SD150745 Trichloroethylene 2 - 250 ppm $54.00SD150722 Ethyl Alcohol 0.02 - 7.5% $54.00 SD150746 Vinyl Acetate 5 - 250 ppm $54.00SD150723 Ethyl Chloride 250 - 10,000 ppm $54.00 SD150747 Vinyl Chloride 0.25 - 20% $54.00SD150724 Ethylene 50 - 800 ppm $54.00 SD150748 Xylene 10 - 500 ppm $54.00SD150726 Ethylene Oxide 0.05 - 3.0% $54.00 Inquire about additional models of detector tubes

Detector Tubes

You can accurately measure over 200 gases and vapors quicklywith this Multi-Gas Analyzer Kit. The actual operation is simpleand accurate. Just snap off both "break-away" ends of a tube,insert the tube into the hand-held pump, and pull the pump han-dle out. As the handle is pulled (just like a syringe), a precisely-measured volume of ambient air is drawn inside the tube where itcontact the reagent.Instantly, the reagent changes colour. The reagent reacts quanti-tatively to provide a length-of-stain indication. The farther thecolour-stain travels along the tube, the higher the concentrationof gas. Note the calibration mark on the tube at the point wherethe colour stain stops, and that's the measurement. It's safe, precise and fast.

Features:• Broad range of direct-reading tubes for over 200 substances• Sensitive and stable absorbing media provides for up to three

years shelf life• Precision piston pump without springs; provides

an accurate measurement upon you can rely

• "Fail Safe" locking handle elimi-nates incomplete samples

• Corrosion-resistant metal alloy construction

• Tube tip breaker is standard• No flow-rate orifice that clogs

or leaks• Most tubes require only one

pump stroke


GV-100S Multi-Gas Analyzer Kit, includespump, carrying case & instructions $429.00

MULTI-GAS ANALYZER KIT

520

Features:• Portable, hand-held instrument• Durable, impact resistant case that withstands fuels and other corrosive liquids found in the field• Continuous sampling with accurate readings of the

specific gas• Highly visible digital display with backlighting• Detachable, stainless steel probe with handle with a one

metre flexible hose• Multi-purpose strap designed for easy carrying and secure

mounting to pipes or duct work• In-line water trap for combustion applications

Model 19-8004 19-8006 19-8007 19-8005Gas Measured CO NOX SO2 O2

Range 0-2000 ppm 0-2000 ppm 0-2000 ppm 0-25.5%Calibration Point 500 ppm CO gas 10 ppm NO 100 ppm SO2 10% O2

Accuracy ±5% of reading ±5% of reading ±5% of reading ±0.8% of reading

Maximum Probe Exposure 538°C (1000°F)Pump Draw Up to 25mm (1”) of waterSensor LIfe Minimum two years typicalAmbient Conditions -5 to 40°C (23 to 104°F); 10 to 85% RH non-condensingDisplay 4-digit LCD, 13mm (1/2”) high digits, with low battery and overrange indicatorPower Supply Four replaceable,” C”-size batteries (not included)Battery Life Approximately 14 hours of continuous useDimensions 218 x 89 x 74 mm (8.6” x 3.5” x 2.9”) HWDWeight Approximately 0.6 kg (21 oz) with batteries

Price $737.00 $1649.00 $1649.00 $880.00Replacement Sensor 24-0498 19-8001 19-8002 24-7070Price $448.00 $476.00 $476.00 $233.00

Four models of analyzers areavailable to measure and display levels of: carbonmonoxide (CO), oxides ofnitrogen (NOx), sulfur dioxide(SO2) or oxygen (O2), accurately,efficiently and economically

M489E

Typical applications include analysis of indoor air quality, energyaudits, furnace and boiler service or replacement, environmentalemissions determination and control, spot checking continuousemission systems, safety checks on stack gases and others. Use is extremely simple. Just insert the probe into the stack of airbeing sampled and switch on. After a one-minute warm-up, theanalyzer will continuously measure and display readings of thespecific gas on the large 1/2” LCD readout. Completely portable analyzers operate on four replaceable, C-size batteries for approximately 14 hours of continuous use. Anelastic strap allows these compact and lightweight analyzers tobe comfortably carried and operated with one hand, or hung onnearby objects. The LCD readout has a built-in light that can beturned on for reading in low light conditions. Display includesoverrange and low battery annunciators. Front panel screwdriveradjustment makes it easy to zero the instrument if required.

Each unit includes: Installed and calibrated sensor,probe with 4-foot hose assembly, calibration tool, water filter, carrying strap, and operating and service manuals

TOXIC GAS & OXYGEN DETECTORS

521

522 M1616E

INDOOR AIR QUALITY MONITORS


IAQ-4 Indoor Air Quality Monitor, °T, RH, CO2, CO $1495.00IAQ-3 Indoor Air Quality Monitor, °T, RH, CO2 $1395.00IAQ-2 Indoor Air Quality Monitor, CO2, CO $1295.00IAQ-1 Indoor Air Quality Monitor, CO2 $995.00Datalogging VersionsIAQ-4-DL Indoor Air Quality Monitor, °T, RH, CO2, CO $1790.00IAQ-3-DL Indoor Air Quality Monitor, °T, RH, CO2 $1690.00IAQ-2-DL Indoor Air Quality Monitor, CO2, CO $1590.00IAQ-1-DL Indoor Air Quality Monitor, CO2 $1290.00AccessoriesIAQ-DLX Deluxe Datalogging Software $300.00IAQ-CC1 Hard-sided Carrying Case $125.00IAQ-BC1 Battery Charger $95.00IAQ-IC USB/IRDA Interface Cable $325.00IAQ-PA-1 Power Adapter $45.00IAQ-BAT Lithium Ion Battery $85.00

Features:• Simultaneous monitoring of up to four parameters: carbon

monoxide (CO), carbon dioxide (CO2), relative humidity andtemperature

• Instantaneous readings are displayed on a large alphanumericLCD

• Datalogging models available with minimum 77 days of data-logging capacity

• Download data to your computer via an infrared port• Filed proven sensing technology• Audible, visual and vibrating alarms• Comprehensive display of data• Real-time clock calculates and records STEL and TWA readings• Peak reading memory• One-button calibration procedure• Menu-driven operation• Compact and lightweight• Plug-in AC adapter, CO and CO2 sensors, lithium battery and

instructions included

Sensor: Electrochemical (CO); Infrared (CO2); RTD (temperature); Capacitive polymer (humidity)

Alarms: Visual: Three LED alarms; Audible: 85 dB at 4”(10cm); Internal vibrator alarm; Low battery warning and two special alarms for CO

Alarm Setpoints: Fully adjustable for CO and CO2

Tests: Self-test of sensors, battery and memory on activation; continuous battery test

Display: Parameter, unit of measurement, data transfer status, gas concentration, memory capacity and battery status; TWA and STEL displayed on demand

Sampling Method: DiffusionDatalogging: Stores real-time information and reading values;

4 MB internal memory (2.5 million samples)Power Supply: Lithium ion batteryBattery Life: 16 hours fully chargedDimensions: 1.6 x 6.6 x 3.4" (40 x 165 x 85mm)Weight: 14.6 oz (415g)

Parameter Monitored Range AccuracyCO: 0-250 ppm or 0-500 ppm ±3%CO2: 0-5,000 ppm or 0-10,000 ppm ±3%Temperature: 23 to 122°F (-5 to 50°C) ±0.2°F (0.1°C)Humidity: 0 to 95% RH 2% RH

Specifications:

Engineered for environments that require reliable, multi-para-meter monitoring, the GasProbe IAQ is the industry’s most versatile, portable instrument. Ergonomically designed and user-friendly, the GasProbe IAQ delivers peak performance that’ssecond to none.The GasProbe IAQ simultaneously and continuously monitors upto four parameters: carbon monoxide, carbon dioxide, relativehumidity and temperature. A real-time clock calculates andrecords STEL and TWA readings. Additional features also includeaudible, visual and vibrator alarms, one-button calibration adpeak reading memory.

INDOOR AIR QUALITY METER


0560.5350 Indoor Air Quality Meter $912.00

M1794E

CO2 concentration is used as an indicator when assessingindoor air quality. If the CO2 concentration in indoor air istoo high, the air feels "stuffy and stale". Bad air quality canlead to fatigue, lack of concentration and illness (SickBuilding Syndrome) and is caused, in many cases, by insuf-ficient ventilation.

The CO2 concentration in demand controlledventilating (DCV) systems is used to regulatethe supply of fresh air. Stationary CO2 trans-ducers are used and should be checkedon a regular basis.

The indoor air to be measured diffusesthrough the particle filter in the measuringcell. At a certain wavelength, the radiationfrom the radiation source is absorbed bythe CO2 in the measuring cell. The higherthe CO2 concentration in the measuringcell, the lower the radiation intensitydetected. The detector then converts theincoming radiation to an electrical signal.Only theradiation wavelength needed for themeasurement is allowed by the optical fil-ter to pass through in the direction of thedetector.

Specifications:Sensor: 2-channel infrared absorption principleRange: 0 to 9,999 ppm or 0 to 1 vol.%Resolution: 1 ppm or 0.001 vol.%Accuracy: 0-5000 ppm: ±(50 ppm + 2% m.v.);

5000-9999 ppm: ±(100 ppm + 3% m.v.)Display: LCD, 0.5" high digits w/ ppm/vol.% switchAmbient Temp.: 32 to 122°FPower Supply: One 9V alkaline batteryBattery Life: More than 8 hoursDimensions: 7.5 x 2.25 x 2"Weight: 11 oz.

523

The new CO2 sensor is based on the dual beam infrared absorptionprinciple. This CO2 sensor has many advantages; long-term stability,high accuracy and efficiency, as well as sensor calibration is notrequired. When compared to electrochemical measuring cells, theCO2 sensor does not show any cross-sensitivity to other gases.Additionally, the sensors are not "poisoned" if the concentration ofCO2 is too high. This new CO2 sensor has a measured value detec-tor and a reference detector so that environmental and disturbinginfluences such as ageing of the radiation source, are compensatedby the reference beam.

INDOOR AIR QUALITY METERS


8732 Indoor Air Quality Meter $726.008760 Datalogging IAQ Meter w/ Temp. & RH $2630.008762 Datalogging IAQ Meter w/ Temp, RH & CO $2923.00

Specifications:CO2 (all models)Sensor Type: Dual-channel, non-dispersive infrared

(NDIR)Range/Resolution: 0 to 5000 ppm/1 ppmAccuracy: ±3% rdg. or ±50 ppm, whichever is greaterTEMPERATURE (Models 8670 & 8762)Sensor Type: ThermistorRange/Resolution: 32 to 140°F (0 to 60°C)/0.1°F (0.1°C)Accuracy: 1.0°F (0.6°C)OPTIONAL TEMPERATURE PROBE (Models 8670 & 8762)Sensor Type: RTDRange/Resolution: -40 to 392°F (-40 to 200°C)/0.1°F (0.1°C)Accuracy: 1.0°F (0.6°C)RELATIVE HUMIDITY (Models 8670 & 8762)Sensor Type: Thin-film capacitiveRange/Resolution: 5 to 95% RH/0.1% RHAccuracy: ±2% RHABSOLUTE HUMIDITY (Models 8670 & 8762)Range: 1.51 E-05 to .00491 lbs. moisture/ft3

(0.24 to 79.0 g moisture/m3)Accuracy: Function of temp. & RHDEW POINT (Models 8670 & 8762)Range: 5 to 120°F (-15 to 49°C)Resolution: 0.1°F (0.1°C)% OUTSIDE AIR (Models 8670 & 8762)Range: 0 to 100%Resolution: 0.1%CO (Model 8762 only)Sensor Type: Electro-chemicalRange/Resolution: 0 to 500 ppm/1 ppmAccuracy: ±3% rdg. or 3 ppm, whichever is greater

Features:• Stable, low-drift NDIR CO2 sensor• Sampling function records multiple point measurements• Optional portable printer provides hard copy

documentation

Additional Features Models 8760 & 8762:• Temperature and relative humidity measurements are

instrumental for determining thermal comfort levels• Calculates % outside air from either CO2 or temperature

readings• Direct calculation of dew point, wet bulb temperature, and

absolute humidity - no psychrometric chart needed• Electrochemical CO sensor for

measurements (Model 8762only)

• 2-line display showing multipleparameters at the same time

• Optional detachable second-ary temperature sensor

• Data logging ability allows userto log 14,000 samples with a timeand date stamp

• Simultaneously records all para-meters available

• Continuous data logging for full-cycle monitoring and trend analysis

• Data can be reviewed on-screen,printed or downloaded to a com-puter for easy report generation

• Statistics function displays average, maxi-mum and minimum values, and the numberof recorded samples

Features:• Large LCD readout allows

for variables to be dis-played simultaneously forquick and easy readings

• Displays: CO2 in % or ppm;Temperature in °C or °F;Elevation in feet or m

• Optional relative humidityand datalogging capabilities

• Elevation correction takesthe guesswork out of read-ings

• Quick and easy calibration -just connect the gas andmake any necessaryadjustments through thecontrol buttons

• Four AA batteries provideup to 48 hours of operationfor convenient portability oruse AC/DC power supplyfor continuous monitoring

• Small, modern design com-plete with a "kickstand" forreadings at a glance

M796E

Specifications:CO2 CHANNELRange: 0 to 9,999 ppmResolution: 1 ppmAccuracy: ±5% rdg. or ±50 ppm, whichever is greaterRepeatability: ±20 ppmMaximum Drift: ±20 ppm per yearWarm-up Time: < 2 min. @ 22°CResponse Time: < 30 sec.Temp. Dependence: ±0.1% per °C or ±1 ppm per °C,

whichever is greaterTEMPERATURE CHANNELRange: 32 to 122°F (0 to 50°C)Resolution: 0.1°F/0.1°CAccuracy: ±0.5% of readingResponse Time: < 30 sec.GENERALAnalog Output: CO2: 0-4 VDC, 1 ppm/mV;

Temperature: 0-4 VDC scaleOutput Impedance: 1 kΩAmbient Conditions: 32 to 122°F (0 to 50°C); 5 to 95% RH non-

condensing; ±1.5% local mean pressurePower Supply: 4 AA batteries, 6 VDC adapter (included)Battery Life: 48 hours on alkaline batteries

Features:• Indoor and industrial air quality monitor with datalogging capa-

bility, displaying 4 or 5 variables simultaneously - temperature,relative humidity, and a choice of 2 or 3 gases

• YES-205-4 measures temperature, relative humidity and yourchoice of two different gases

• YES-205-5 measures temperature, relative humidity and yourchoice of three different gases

• Portable/wall mount with an AC adapter, providing monitoringconvenience for short or long-term monitoring

• A rugged metal enclosure provides endurance and accuracy inany environment

• An NDIR CO2 sensor enables comprehensive and accuratereadings free of drift due to temperature change

• Built-in temperature and relative humidity sensors for balancedand accurate gas readings

• With 10 possible interchangeable sensors, there is no need formultiple testing instruments.- Indoor IAQ sensors (CO2, CO, NO2, NO, O2)- Industrial sensors (O2, H2S, SO2, CL2, H2, HCN, HCL, NH3,

C2H4O and combustible gases)• User definable settings include alarm set-points (for gas read-

ings), enable/disable alarm capability on either sensor for audi-ble alert notification

• Windows software provides a flexible "bullet-proof" solution forthe PC use of the logged data. Real-time downloading and datamonitoring can occur when the PC's directly connected to unit

• 3 hour internal rechargeable sealed lead acid battery, for spotsurvey convenience, or use the supplied AC adapter for continuous monitoring


YES-206 Carbon Dioxide/Temp. Monitor $879.00YES-206LH CO2/Temp./R.H. Monitor /Logging $2560.001200C Deluxe Carrying Case $84.00


YES-205-4 Multiple Gas Monitor/Logger $3927.00YES-205-5 Multiple Gas Monitor/Logger $4486.00

INDOOR AIR QUALITY MONITOR

MULTI-GAS MONITOR/DATALOGGER

524

Specifications:Range: 0 to 1,000 ppm N2OResolution: 5 ppm full rangeAccuracy: ±10% rdg. or 10 ppm, whichever is greaterSampling Time: Once per secondWarm-up Time: 10 minutesHousing: High impact ABS case, NEMA 12 (IP65);

dust and water resistantAmbient Conditions: 59 to 77°F (15 to 25°C);

0 to 99% RH (non-condensing)Power Supply: Nickel-metal hydride batteryBattery Life: 8 hrs. continuous use (6 hrs. w/ pump)Dimensions: 5.5 x 2.6 x 0.8" (140 x 66 x 20mm)Weight: 7 oz (200 g)


19-7109 3010 Nitrous Oxide Gas Monitor $3290.0019-3301 IrDA Interface/Software $408.0019-3311 Plastic Carrying Case $157.0019-3304 Protective Boot $118.0019-8027 Calibration Kit $340.0023-4003 Calibration Gas, 100% N2 $63.00

NITROUS OXIDE GAS MONITORFeatures:• Compact and light-

weight personal N2Omonitor

• Built-in dataloggingcapabilities, stores up to 800 readings

• Two TWA capabilities -real time (over 8hours)/elapsed time(time unit is switchedon)

• Readings can be tog-gled between TWA/PPM

• No span calibrationrequired, only zero calibration

• Built-in alarm (user activated)

• Maintenance free dualwavelength infraredsensor

• Pressure compensatedsensor

• Two-way IrDA communi-cation link

• Internal pump forremote sampling withlow flow indicator

M2311E 525

CARBON DIOXIDE METERS

Model Description Price8762 Carbon Dioxide/Carbon Monoxide Meter $2923.008728 Printer $756.00

Specifications:CO2 CONCENTRATIONSensor Type: Non-dispersive infrared (NDIR)Range: 0 to 5000 ppmAccuracy: ±3% rdg. or ±50 ppm, whichever is greaterResolution: 1 ppmResponse Time: 20 seconds (63% of final value for

500 ppm step change in still air)CO CONCENTRATION (Model 8731 only)Sensor Type: ElectrochemicalRange: 0 to 500 ppmAccuracy: ±3% rdg. or 4 ppm, whichever is greaterResolution: 1 ppmRepeatability: ±2% rdg. Response Time: <60 seconds to 90% of final valueGENERALTime Constant Values: 2, 5, 10, 30 or 60 secondsDisplay: 4 digit LCD, 15mm (0.6") high digitsPower Supply: 4 “AA” alkaline or NiCad batteriesBattery Life: 1.35 hrs (alkaline); 4.75 hrs (NiCd)Dimensions: 100 x 168 x 38 mm (3.9 x 6.6 x 1.5”)Probe Length: 8731: 16.1cm (6.34”); 8730: 11.7cm (4.6”)Probe Diameter: 1.9 cm (0.75”)Weight: 0.594 kg (1.32 lb) w/ batteries

The Q-Check CO2 and CO meters are a great way to makequick, reliable measurements to solve Indoor Air Quality(IAQ) problems. The Q-Check meters use a non-disper-sive infrared (NDIR) sensor to measure CO2 and anelectrochemicalgas sensor tomeasure CO concentrations.Model 8730 allowsyou to quickly andeasily measureCO2. With the sensorlocated in the detach-ed probe, reliablereadings can be madein rooms as well as inducts. The 8730 cal-culates the samplestatistics includingaverage, minimum,maximum andelapsed time. Anoptional portable printerprovides a hard copy ofthe data.Model 8762 has all the fea-tures of the Model 8730 inaddition to measuring CO.

526 M2318E


8650 Carbon Dioxide Meter $2609.002917025 RTD Air Temperature Probe $239.002917026 RTD Surface Temperature Probe $176.008928 MicroPrinter $756.00

Specifications:CARBON DIOXIDERange: 0 to 5000 ppmResolution: 1 ppmAccuracy: ±3% rdg. or ±50 ppm, whichever is greaterResponse Time: 60 secondsTEMPERATURERange: 32 to 122°FResolution: 0.1°FAccuracy: ±1°FRELATIVE HUMIDITYRange: 5 to 95% RHResolution: 0.1% RHAccuracy: ±2% RHResponse Time: 20 secondsDEW POINTRange: 5 to 120°FResolution: 0.1°FWET BULBRange: 40 to 140°FResolution: 0.1°FGENERALSensor Type: Non-dispersive infrared (NDIR)Power Supply: 4 "AA" size alkaline batteries

Analyze the conditions of your indoor environment: carbondioxide levels, temperature, humidity, wet bulb, and dew pointtemperatures. The 8650 calculates the percentage of outside airfrom CO2 readings and temperature readings. The sensor islocated in a long probe so that the user can take readings in aroom or in a duct. An optional RTD temperature probe gives theuser the flexibility to actual wet bulb readings or a secondambient temperature.

CARBON DIOXIDE METER


8610 Carbon Dioxide Meter $810.00

The 8610 is a simple to-sue instrument to measure carbondioxide in schools, offices, conference rooms, factories, andmore. This is an important instrument for safety officers andbuilding managers to test adequate ventilation levels to ensureoccupant comfort.

Specifications:Sensor Type: Non-dispersive infrared (NDIR)Range: 0 to 0 to 5000 ppmAccuracy: ±3% rdg. or ±50 ppm, whichever is greaterResolution: 1 ppmResponse Time: 60 seconds (higher in still air)Power Supply: 4 "AA" size alkaline or NiCad batteries

CARBON DIOXIDE METER

The 8650 stores data and can show average readings in additionto minimum and maximum values. it has datalogging feature totake measurement over an extended time period - a very usefuloption in understanding occupant trends. The optional 8522MicroPrinter can be used with this meter to record readings; allreadings can also be downloaded to a computer.

527M1588E

Complete Kit includes:• Smoke Gauge Pump: Conforms with ASTM D-2156-XX stan-

dards for testing smoke density in flue gases from burning dis-tillate fuels. Filter paper clamps instantly into pump inlet.

• Hole Plugs: Packet of 20 to fill awl holes• Smoke Chart: For easy comparison with samples taken• Awl: Pierces smoke pipe for thermometers and sampling tubes• Smoke Gauge Filter Paper: Roll of paper is contained in a

dispenser box.• Metal Terminal Tube: 8-1/2" long, heavy gauge brass.• Rubber Tubing• Spring Holders: For thermometers and sampling tubes• Instructions: With step-by-step illustrations• Foam-lined polyethylene carrying case

Model 1200-A Test Kit includes:• Model 171 Inclined Draft Gauge: Range 0 to 0.25 in.w.c. in

0.01 divisions• Model 1101 CO2 Indicator: Made of clear acrylic plastic.• Aspirator bulb, filter and tubing assembly.• Filter Wool: Sufficient for 1000 tests.• Smoke Gauge Pump: Conforms with ASTM D-2156-XX stan-

dards for testing smoke density in flue gases.• Smoke Gauge Filter Paper.• Smoke Chart: For easy comparison with samples taken.• Combustion Efficiency Slide Rule.• Awl: Pierces smoke pipe for thermometers and sampling tubes.• CO2 Absorbent Solution.• A-503 Stack Thermometer: Dial type, range 200 to 1000°F• Gauge Oil.• Spring Holders: For thermometers and sampling tubes.• Hole Plugs.• Instructions: With step-by-step illustrations.• Combustion Data Card and Parts List.• Polyethylene carrying case with handle

Model 1200-B Test Kit includes:• Identical to Model 1200-A, omitting Model 171, including instead• Magnehelic Draft Gauge: 4" dial, range 0 to 0.25 in.w.c. in 0.01

divisions with velocity scale of 300 to 2000 fpm.

SMOKE GAUGE KIT


920 Smoke Gauge Kit $139.00

Easy-to-use smoke gauge kit enables you to quickly balancemaximum CO2 with minimum smoke for clean, efficient combus-tion. Simply take an actual sample of the smoke being tested andcompare it to the standards on the smoke chart included. Just 10full strokes of the pump produces an accurate test sample.

COMBUSTION TEST KITS


1200-A Combustion Test Kit $858.001200-B Combustion Test Kit $858.00

Measure all four factors that govern overall efficiency: CO2, con-tent, draft, stack temperature and smoke. Accuracy to ±0.5% CO2

fully meets the requirements of the professional heating engineer.Yet an apprentice can follow the simple, illustrated step-by-stepinstructions. Add a small pitot tube for air velocity measurements.

COMBUSTION GAS ANALYZER

M2324E

Specifications:MEASUREMENT RANGES

Combustion Air Temp.: 0 to 176°F (-18 to 80°C)Flue Gas Temp.: 0 to 999°F (-18 to 537°C)Oxygen: 0.1 to 20.9% O2Carbon Monoxide: 0 to 2,000 ppm CODraft/Diff. Pressure: -27.0 to +27.0 in.WC

CALCULATED RANGESCombustion Efficiency: 0.1 to 99.9%Carbon Dioxide: 0.1 to 20.0% (fuel dependent)CO (air free): 0 to 9,999 ppmExcess Air: 0 to 250%

GENERALSelectable Fuels: Natural Gas, Oil #2, Propane, KerosenePower Supply: Four "AA" alkaline batteriesBattery Life: Typically 24 hrs. of continuous useDimensions: 7.5 x 3 x 1.5"Weight: 16 oz. w/ batteries

Model 100 100 KIT 105 110 120 125(• = Std.; o = Optional) 24-8200 24-8201 24-8202 24-8103 24-8104 24-8105

MeasurementsOxygen o o o • • •Air Temperature o o o • • •Stack Temperature o o o • • •Carbon Monoxide • • • o • •Draft o o • o o •Differential Pressure o o • o o •Combustion Air Temp. o o o o o •CalculationsCombustion Efficiency o o o • • •Excess Air o o o • • •Carbon Dioxide o o o • • •CO (air free) o o o o • •Other FeaturesPrinter Capability • • • • • •Upgradeable • • • • • •AccessoriesProbe/Hose Assembly • • • • • •Hard Carrying Case • • • • • •Infrared Printer o • o o o oProtective Rubber Boot o o o o o •Pressure Accessory Kit n/a n/a o n/a n/a o

Price $737.00 $1098.00 $903.00 $997.00 $1280.00 $1569.00

Features:• Simple to use. Turn

unit on, selectfuel, insertprobe.

• Holdkeyfreezesthe read-ings andtransfersthem to theinfraredprinter(optional)

• Backlit displayshows up tofive differentmeasured valuesand four calculated values

• Seven models are com-pletely upgradeable from simple carbonmonoxide tester to complete combustion analyzer to meet yourspecific application needs

• Error message informs you of an instrument or sensor failure• Automatic power off ensures long battery life• Unique hand strap and magnetic sleeve provides hands free

operation• Comes complete with a carrying case, probe and hose assem-

bly and batteries

Model Description Price24-1229 Infrared Printer $456.0024-0887 Spare Paper Roll (1) for IR Printer $18.0021-7006 True Spot Smoke Test Set $139.0024-1127 Protective Boot w/ Magnets $79.0024-7265 Replacement CO Sensor $264.0024-8106 Replacement O2 Sensor $223.0024-7059 Calibration Kit $385.0051-1994 Calibration Gas, 100 ppm CO $264.0024-8214 Pressure Kit $307.00104-1797 10 ft. Thermocouple Assembly $76.00104-1798 1 in. Thermocouple $55.00

528

529M1617E

COMBUSTION GAS ANALYZERS


GPROB-SK1 Standard Combustion Analyzer Kit $1495.00includes: GasProbe Combustion Analyzer,

Flue Gas Temp. and Sample Probe,Draft/Differential Pressure Probe,

2-port AC charger,2 NiCd VersaPak™ Batteries,

Pump Filters (pkg. of 5),Hard-sided Carrying Case

GPROB-DK1 Deluxe Combustion Analyzer Kit $1995.00includes: All of the above, plusInfrared, HP Cordless Printer,

Surface/Air/Water Temp. Probe,Concussion-proof Boot,2 Rolls of Printer Paper

GA-BMAX Concussion-proof Boot $70.00D4-VP100 NiCd Rechargeable Battery $33.00GA-VP110 NiMH Rechargeable Battery $44.00V-CHRG1 2-port, 12V Vehicle Charger $120.00D4-VP130 2-port, 110 VAC Charger $55.00GA-PFMAX Pump Filters (pkg. of 5) $15.00

Features:• Five instruments in one: Combustion Gas Analyzer, Gas

Appliance Tester, Ambient Air Monitor, Draft MeasurementDevice, and Thermometer

• Real-time digital readings of O2, CO, CO2, CO/CO2 ratio andstack air temperatures

• Calculation of combustion efficiency for five fuels (Natural Gas,LPG, Light Oil, Heavy Oil, Solids)

• Measurement of ambient CO and oxygen levels in air• Electrochemical sensors• Automatic calibration of O2 sensor, sampling pump and pres-

sure sensor each time the instrument is turned on• Large, multi-parameter display• Automatic, continuous backlight in low light conditions• External water trap/filter in combination with internal pump filter

prolongs instrument life• Simple, intuitive operation• Download data via infrared printer at the touch of a button• Datalogging of readings for later recall with time and date• A true handheld - small, compact and lightweight• 15 hours of continuous use on one VersaPak™ NiCd recharge-

able battery

Specifications:Gas Sensor: Electrochemical (CO and O2)Temp. Sensor: K-type thermocoupleSensor Construction:Stainless steel shaft and rubber hose with

pistol gripInsertion Length: Temp. probe: 10” (260cm);

Sampling hose: 58.5” (1500mm)Fuel Types: Five, field-selectable, fuel types: natural gas,

LGP, light oil, heavy oil, and solid fuel (bitu-minous coal)

Operating Modes: Combustion Gas Analyzer Mode and Ambient Air Safety Mode with factory set low and high alarm levels for CO and O2

Alarms: Visual: Flashing wide-angled alarm bar plus alarm LCD; Audible: Variable, pulsed 70 dB tone; Over limit, low battery and sensor fail alarms; Auto backlight on all low light and alarm conditions

Tests: Automatic self-test on activation verifies sensorintegrity, battery and sampling pump; continu-ous battery and sampling pump tests

Display: Continuously displays ppm, % of gas; temper-ature and draft readings; time and date

Pump: Internal, pulse-free rotary vane pump (250 ml/min)

Housing: Shock-resistant ABS enclosurePower Supply: One 3.6V VersaPak™ rechargeable batteryBattery Life: 15 hours typical Dimensions: 1.6 x 3.0 x 6.0" (40 x 75 x 150mm)Weight: 13.1 oz (375g)

Specifications:Parameter Measuring Range ResolutionOxygen: 0-25.0% 0.1%Carbon Monoxide: 0-2,000 ppm 1 ppmCarbon Dioxide: 0-13.5% 0.1%CO/CO2 Ratio: 0-0.9999 0.0001Combustion Efficiency: 0-99.9% 0.1%Flue Gas Temp.: 41-1832°F (5-1000°C) 1°F (1°C)Draft/Diff. Pressure: 0-40.1” w.c. 0.004” w.c.

(0-100 mbar) (0.1 mbar)Surface/Air/Water Temp.: 41-482°F (5-250°C) 1°F (1°C)

COMBUSTION ANALYZER

M1088E530

Features:• Quickly and easily measure O2, CO2, efficiency, excess air,

draft and CO (325-1 only)• Hands free operation with convenient magnetic back plate• Immediate printout of readings on-

site, with date and time using acordless infrared printer

• Kit includes flue gas analyzer,12" long flue gas probe with 5'long hose, soft case withmagnetic back, servicecase, pack of 10 particlefilters batteries, quickreference card and cal-ibration certificate

• Probes must beordered separately

Specifications:TEMPERATURERange: -40 to 1122°FResolution: 0.1°FAccuracy: ±0.5°F (32 to 212°F);

±0.5% m.v. (from 212°F)Sensor: Thermocouple Type K (NiCr-Ni)DRAFT/PRESSURERange: ±16" H2O (0.6 psi)Resolution: 0.01"H2O (0.01 hPa)Accuracy: ±0.01"H2O (0.03 hPa)Max. Overload: 400"H2O (14.5 psi/1 bar)GROSS/NET EFFICIENCYRange: 0 to 120% Resolution: 0.1%O2 MEASUREMENTRange: 0 to 21 vol.%Resolution: 0.1 vol.%Accuracy: ±0.2 vol%CO2 MEASUREMENTRange: 0 to CO2 max. (calculation from O2)Resolution: 0.01 vol.%Accuracy: ±0.2 vol.%CO MEASUREMENT (Model 325-1 only)Range: 0 to 2000 ppmResolution: 1 ppmAccuracy: ±20 ppm (to 400 ppm); ±5% rdg. (>400 ppm)GENERALPower Supply: Battery or 110 VACBattery Life: Approx, 10 hoursDimensions: 8.5 x 3 x 2"Weight: 18 oz.


400563.3251 Flue Gas Analyzer Kit w/ CO $975.00400563.3252 Flue Gas Analyzer Kit w/o CO $1095.000390.0085 Replacement O2 Measuring Cell $88.000390.0297 Replacement CO Measuring Cell $168.000554.0315 Hose Connection Set $73.000516.3250 Plastic Service Case $123.000554.0040 Spare Particle Filters (10 pcs.) $43.00


0554.0545 Infrared Printer w/ 1 roll of thermal paper $436.000554.0569 Spare Paper for Printer (6 rolls) $43.000554.0307 Smoke Tester $187.000600.9544 Compact Flue Gas Probe, 7" long $283.000600.9542 Compact Flue Gas Probe, 12" long $299.000600.9798 Miniature Ambient Air Probe $159.000602.4692 Clamp Probe $129.000602.0392 Surface Probe $218.00

Compact flue gas probe up to 932°F. Includes cone for posi-tioning, NiCr-Ni thermocouple, 5' hose.

Mini-ambient air probe up to 212°F. Includes cone and magnet-ic clip. 2.5" long.

Clamp probe for temp. measurement up to 212°F on pipes witha diameter of 1".

Surface temperature probe with spring thermocouple strip. Up to 570°F.

COMBUSTION ANALYZER

M1806E

The 330 represents a new generation in residential/light commer-cial combustion testing by offering more features in an easier touse format.The 330 provides the highest level of reliability available intoday’s combustion analyzers. The self diagnostics function pro-vides you with status information anytime and anywhere at thetouch of a button; info on the condensate trap level, for example.Maintenance intervals are displayed making analyzer serviceeasier to plan and sudden breakdowns a thing of the past.The large, high contrast backlit display can be easily read inevery situation and the information you need is available straight-away. A graphical, menu-driven system is easy to use, withwords, not codes, for display choices and messages.The 330makes your daily work more effective as measurements are com-pleted in only a few easy steps.The 330 calibrates in just 30 seconds. During calibration, set-upsmay be made so the analyzer is ready for immediate use. A com-plete range of accessories for flue gas analysis and jobs such astuning and testing installations make it possible for the 330 sys-tem to adapt to a wide range of applications. Accessory probesare automatically recognized by the analyzer and the appropriatescreens immediately appear in the display. Such measurementsmay be conducted simultaneously with flue gas measurement.A unique quick connect probe handle makes analyzer set-up fastand easy. New modular probes, such as the ambient CO probeand the CO2 probe, are automatically recognized by the instru-ment. The probes have a bayonette-like connection ensuring thatall gas paths are properly connected. The single hose cannot bebent, is virtually indestructible and saves on space. The particlefilter, always in plain view at the rear of the handle, is easilychanged. The robust handle fits comfortably in your hand, facili-tating its use.A compact, state-of-the-art lithium ion power pack providesenough energy for more than a full day’s worth of testing. Thisunique power system lets you know accurate battery levels at alltimes via the “i” button. The lithium ion rechargeable batteries arenot susceptible to any memory effects or sudden total discharge.The 330 not only stands apart because of its distinctive andergonomic package, but also due to its unique, robust housing.The materials used function as integral protection from impactand shock. In addition to being rugged, the lightweight probematerials easily withstand high stack temperatures.The 330 is supplied complete with rechargeable battery, powersupply for line power operation or battery recharge in instrument,modular flue gas probe (12” long x 1/4” diameter with 7’ hose),spare filters and hard carrying case.

Specifications:RANGESTemperature: -40 to 2192°FDraft: ±16 in.H2OPressure: 0 to 80 in H2OO2: 0 to 21% volumeCO: 0 to 4000 ppmEfficiency: 0 to 100%OPTIONAL RANGESCO2: 0 to CO2 max %Ambient CO: 0 to 500 ppmGas Leak: 0 to 1000 ppm CH4/C2H8

Model Description Price400563.3301 Flue Gas Analyzer Kit $1588.00400563.3302 Flue Gas Analyzer Kit w/ IR Printer $1878.000554.1087 Rechargeable Battery w/ Charging Station $109.000554.0569 Spare Paper for Printer , 6 rolls $43.000554.0116 Adhesive Storage Pockets $94.000554.0307 Smoke Tester $187.000554.1204 Differential Temp. Set (2 pipe wrap probes) $471.000554.3385 Spare Particle Filters, 10 ea. $42.000554.9760 7” Probe, Tube only, 5/16” dia. $181.000554.9761 12” Probe, Tube only, 5/16” dia. $187.000554.9764 13” Flexible Probe, Tube only, 0.4” dia. $326.000554.8764 12” Probe for Mean CO calc. $579.000554.1202 Hose Extension, 9’ $283.000632.1247 Ambient CO Probe $870.000600.9791 Combustion Air Temp. Probe $307.000604.0194 Surface Probe $296.000430.0143 Connection Cable for Surface Probe $61.00

531

COMBUSTION ANALYZER

M1020E

The CA-Calc portable electronic combustion analyzer is arugged, fast-response, easy-to-use instrument ideal for tuningburners for maximum efficiency and safety - from large industrialsystems to small residential appliances. The basic unit measuresO2, CO, draft, and ambient and stack temperatures. Optionalsensors can be added for measuring NO, NO2, SO2 and high COconcentrations.

Features:• Real-time measurements in seconds after power-up• Calculates combustion efficiency, excess air, %CO2 and

emission rates• Provides NOx values (models with NO sensor only)• User adjustable CO high limit pump shutdown protects CO

sensor• Zoom function simplifies viewing of critical parameters• Easy-to-understand menus and icon-driven commands• Emission gas concentrations use the adjustable O2 reference• Field-recalibration of sensors saves time and money• Factory calibrated, field-installable replacement sensors• Four sensor slots designed for easy field upgrades• CO sensor is hydrogen compensated• Stores up to 350 samples for 35 site and 75 systems• On-site access of customer histories• Data sorted by customer, system or individual sample for print-

outs and report generation• Stored data include fuel parameters and time/date stamps• Download stored data for report management• Optional printer provides hard copy output• Battery system provides 24 hours of continuous operation• Eight factory-set fuels are user-adjustable to improve accuracy• Five user-defined fuels with easy field set-up• Status of the internal pump monitored continuously• All models include 12 in. probe with a 9 ft. sampling tube,

carrying case, power supply, water trap, manual and calibrationcertificate

Specifications:RANGES/RESOLUTION

Oxygen (O2): 0 to 25%/0.1%Carbon Monoxide (CO): 0 to 5,000 ppm/1 ppmHigh Concentration CO: 0 to 20,000 ppm/1 ppmNitric Oxide (NO): 0 to 4,000 ppm/1 ppmSulfur Dioxide (SO2): 0 to 4,000 ppm/1 ppmNitrogen Dioxide (NO2): 0 to 500 ppm/0.1 ppm

CALCULATED RANGES Carbon Dioxide (CO2): Calculated from O2 & fuel typeExcess Air (%EA): 0 to 1000%Efficiency (Enet & Egr): 0 to 125%Stack Loss: 0 to 100%Supply Temp.: -22 to 392°F (-30 to 200°C)Flue Gas Temp.: 32 to 1800°F (0 to 1000°C)Draft: ±30 in. H2O (±80 mbar)

GENERALPump Flow Rate: Nominal 700 cc/minSampling Probe Temp.: 1800°F (1000°C) max.Probe Dimensions: 12" (30cm) L x 5/16" (0.8 cm) dia.;

9 ft (2.75 m) sampling tubeDisplay: 1/4-VGA B/WOperating Conditions: 32 to 122°F (0 to 45°C); 15 to 90% RHPower Supply: 4 "C" cell alkaline batteriesBattery Life: >24 hr. (pump on); >48 hr. (pump off)Dimensions: 6 x 10 x 2.5" (15 x 25.4 x 6.4 cm)Weight: 2.5 lb (1.14 kg)

Model Description PriceCA-6210 Combustion Analyzer w/ O2 & CO $3358.00CA-6211 Combustion Analyzer w/ O2, CO & NO $3919.00CA-6212 Combustion Analyzer w/ O2, CO & High CO $4199.00CA-6213 Combustion Analyzer w/ O2, CO, NO & SO2 $5251.00CA-6214 Combustion Analyzer w/ O2, CO, NO &

High CO $5251.00CA-6215 Combustion Analyzer w/ O2, CO, NO, NO2

& teflon-lined sampling tube $5251.00

532

The most innovativeemission analyzer onthe market todaynow measures...O2

CO low and highNOx low and highSO2

H2SCxHy

°C∆P∆TmAmVRPMpi./min.FlowAmbientCO2

Gas LeaksEfficiency

Features:• Low NOx testing• Complete on-board sample conditioning and moisture removal

system• Integrated sample dilution system expands the CO testing

range by 40x• Temperature controlled, pre-calibrated sensors are field upgrad-

ed in minutes• Integrated printer• Onboard memory stores 250,000 data samples• Large backlit display, with multi-page scroll down, zoom func-

tion and pull down menus• User defined function keys• Easy quick-change filters• Interchangeable battery pack or AC power• Convenient RS-232 user interface• Control unit can be remotely located up to 150' away• Control unit and analyzer box together weigh less than 10 lbs.

EMISSION ANALYZER

M2380E 533

Parameter O2 CO CO low NO NO low NO2 SO2 H2S CxHyRange 0-25% vol. 0-10,000ppm 0-500ppm 0-3000ppm 0-300ppm 0-500ppm 0-5000ppm 0-300ppm 0-4%Accuracy <0.8% of <5ppm: 0-99 <2ppm: <5ppm: <2ppm: <5ppm: <5ppm: <2ppm: <0.04% vol.

m.v. ppm; 0-39.9ppm; 0-99ppm 0-39.9ppm 0-99ppm 0-99ppm 0-39.9ppm 0-0.4% vol.<5% of m.v.: <5% of m.v.: <5% of m.v.: <5% of m.v.: <5% of m.v.: <5% of m.v.: <5% of m.v.: <10% of m.v.: 100-2000ppm 40-500ppm 100-2000ppm 300ppm 500ppm 100-2000ppm 40-300ppm 0.41-4% vol.<10% of m.v.: < 10% of m.v.: <10% of m.v.:2001-10,000 2001-3000 2001-5000ppm ppm ppm

Resolution 0.1% vol. 1ppm 0.1ppm 1ppm 0.1ppm 0.1ppm 1ppm 0.1ppm 0.01% vol.Parameter CO2 ∆press.1 ∆press.2 Efficiency Flow Velocity Current Voltage RPM Temp.Range 0-CO2 max. ±80" H2O ±16"H2O 0-100% 0-7900fpm 0-20mA 0-10V 20-20,000rpm -40 - 2192°FAccuracy Calculated <1% of m.v.: <1% of m.v.: ±0.04mA ±0.01V <33°F:

from O2 -20"- -80"H2O -16"- -1.2"H2O -40-+212°F<1% of m.v.: <1% of m.v.: <0.5% of m.v.:+20"-+80"H2O +16"-+1.2"H2O 212-2192°F

<0.5%: <0.5%:-19"-+19"H2O -1.2"-+1.2"H2O

Resolution 0.01% vol. 0.01"H2O 0.01"H2O 0.1% 10 fpm ±0.01mA ±0.01V 1 rpm 1°F

Key: • : Standard, ° : Option, - : Not available

Model 0000.3501 0000.3502 0000.3503 0000.3504Max. # of gas sensors 4 4 6 6O2 • • • •CO • • • •CO low - ° ° °CO rinse ° • • •CO high (dilution) - ° ° •NO ° • • °NO low - ° ° •NO2 ° ° • •SO2 - ° ° °H2S - - ° °Hydrocarbons - - • •Fresh Air Purge - ° • •Diff. Pressure (2x) • • • •Gas cooler (peltier) ° • • •Touch Screen ° ° ° •6' Remote Cable • • • •12" Probe w/ 7' Hose • • • •Special NO2 Tube - ° • •Hard Carrying Case • • • •Price $11055.00 $13098.00 $15139.00 $16670.00

Specifications:

GAS EMISSIONS ANALYZER

M1805E

The AGA5000 is a truly portable exhaust gas analyzer that setsnew standards of convenience and ease of use. it fits comfort-able in one hand and can run for up to four hours on its internalrechargeable battery.Programmable four or eight line backlit display shows measure-ments in real time. The AGA5000 is made for additional useswhich include engine fault diagnosis and tune-up verification.

Features:• Measures five gases individually: Carbon Monoxide (CO),

Hydrocarbons (HC), Carbon Dioxide (CO2), Oxygen (O2), andNitric Oxide (NOx)

• Real-time measurements• Readings are actual, not calculated• Separate pump switch• Integral flow checking provides warning of probe or filter block-

ages• Self-powered analyzer, the only connection to the vehicle is the

tail pipe• Programmed to evaluate gasoline, LPG and CNG fuels• Calibration procedure uses standard automotive test gases• Infrared link to optional printer• Ruggedized design sets unsurpassed durability standards• Includes protective rubber boot, water trap and filter, exhaust

probe and five extra filters, battery charger and carrying case

Specifications:Gas Range Resolution AccuracyCO 0-5% 0.01% ±5% rdg.

Over-range: 20% ±0.5% vol.O2 0-21% 0.01% ±5% rdg.

Over-range: 25% ±0.1% vol.HC 0-2000 ppm 1 ppm ±5% rdg.

Over-range: 10,000 ppm ±12 ppm vol.NOx 0-5000 ppm 1 ppm ±5% rdg.

Over-range: 5,000 ppm ±40 ppm vol.CO2 0-16% 0.1% ±5% rdg.

Over-range: 25% ±0.5% vol.Lambda 0.8-1.2 0.001AFR 11.76-17.64 0.01GENERALResponse Time: 15 sec.Pre-programmed Fuels: Gasoline, LPG and CNGAmbient Conditions: 41 to 104°F; 10 to 90% RH non-

condensingHose Length: 12’ plus 8’ extensionBattery Charger: 110VAC input; 10VAC off-load outputBattery Life: > 4 hours with full charge

Model Description PriceAGA5000 Gas Emissions Analyzer $5500.00

534


RLD1 Refrigerant Leak Detector $320.00


XL-1A Basic Refrigerant Leak Detector $237.00AX-1A Advanced Refrigerant Leak Detector $325.00XP-1A Deluxe Multi-Refrigerant Leak Detector $404.00

Specifications:Gases Sensed: CFCs: R11, R12, R13; HCFCs: R22, R502,

R500; HFCs: R134a, R123, R125, R23, and other halogen based compounds

Sensitivity: 0.4 oz/year (11 g/year) R134aAlarm Settings: Audio: adjustable tick rate:

Visual: flashing LEDSensor: Advanced ionization detectionResponse Time: Less than 1 secondWarm-up Time: 10 secondsProbe: 16" (40 cm) length, flexible gooseneckAmbient Conditions: 32 - 104°F (0 - 40°C), 0 - 80% RHPower Supply: One 9V alkaline batteryBattery Life: Approx. 16 hours continuous useDimensions: 7.3" x 3.4" x 1.4" (18.5 x 8.5 x 3.4 cm)Weight: 18 oz. (500 g)

Specifications:Model XL-1A AX-1A XP-1ASensitivity: <0.4 oz/yr <0.25 oz/yr <0.1 oz/yr

(11 g/yr) (7 g/yr) (3 g/yr)Sensitivity Levels: 1 2 7Visual Indicators: No 6 (1 colour) 18 (tri-colour)Mechanical Pump: No Yes YesKeypad Controls: No Yes YesBattery Life: 40 hr. 30 hr. 30 hr.Sensing Tip Life: Approx. 40 hoursPower Supply: 3 VDC, 2 x "C" cell alkaline batteriesDimensions: 10.25 x 2.75 x 2.25" (260 x 69 x 57 mm)Weight: 1.2 lb. (544 g)

Detect and pinpoint even small leaks of refrigerant gases usingModel RLD1 Refrigerant Leak Detector. The RLD1 is effective indetecting existing refrigerants including HFC, HCFC, CFC, SF6,R134a, and R123. Unit features thumbwheel operation toincrease sensitivity and audio and visual indication. An increasingtick rate sounds as a leak is pinpointed and the red indicationlight flashes more rapidly. The flexible gooseneck probe is idealfor hard to reach areas. Use the RLD1 in domestic and commer-cial refrigeration systems, automotive, air conditioning, and quali-ty control testing environments.

REFRIGERANT LEAK DETECTOR

REFRIGERANT LEAK DETECTORSFeatures:• Detects all halogenated refrigerants• Visual leak size indicators• Variable frequency audible alarm• Advanced digital signal processing monitors the sensing tip up

to 2000 times per second• Flexible stainless steel probe with Teflon® liner• Rubber cushion grip on handle• Constant power/low battery indication• All new ergonomic design• Certified to SAE J1627• UL classified and CE approved• Includes batteries and molded carrying case

M1795E 535

REFRIGERANT LEAK DETECTORS

REFRIGERANT LEAK DETECTORS

M1804E

Features:• Will locate any halogen in CFC, HCFC, HFC and blends• Heated diode sensor that's equally responsive to all refrigerants

for assured reliability• Automatic sensitivity adjustment, even when high levels of

background vapors or refrigerant are present• Broad sensitivity setting that automatically adjusted by the

microprocessor• 0.2 second response time so that leaks are pinpointed in a second• Easy-to-clean hydrophobic filter that prevents water from

reaching the sensor tip• Single probe with 20" maximum length that can also be wrap-

ped around the instrument for a 3" probe, has a tapered tip foreasy access in hard-to-reach places

• Flashing probe tip with variable frequencies to indicatechanging gas concentrations

• Audible indicator with mute feature• Sensor fail indication• Dual bargraph displays that offer visual confirmation no matter

what position the instrument is in• LED indicating when power is on, the amount of battery life left,

and when the mute feature is activated• Optional rubber boot with Maglite flashlight cavity for

one-handed inspections and added protection• Meets or exceeds SAE J1627 for R134a, RR12 and R22• Basic kit comes with instrument, instruction manual, batteries,

soft carrying case and one container of check gas• In addition to the above mentioned items, the deluxe kit comes

with instrument with protective rubber boot and MagLite, allpackaged in a hard carrying case

Features:• Detects all halogenated refrigerants, including RG5410A• Heated Pentode™ sensor technology offers refrigerant specific

detection; eliminates false alarms; is unaffected by rapid tem-perature change and cannot be “poisoned” by excessive refrig-erant

• True mechanical pump provides instant response and clearing• Adjustable sensitivity and one touch reset• Tri-colour visual leak size indication• Mute feature silences audible alarm• Tactile keypad controls• Sensor status indication• Battery self test• 16” flexible stainless steel probe• Nylon carrying case and battery charger included• Certified to SAE J1627

536

Specifications:Refrigerants Detected: All CFC & HCFC refrigerants containing

Chlorine, Fluorine, R134a, HFCs, R12, R22, R123

Alarm Sensitivity: 0.25 oz/yr. of R134aPower Supply: 4 x AA alkaline batteriesBattery Life: 6 hrs. of continuous operationProbe: 20" (50.8cm) extended; 3" (7.62cm)

wrapped around instrumentDimensions: 1.75 x 9.75 x 2.4" (4.4 x 24.8 x 6.1 cm)Weight: 0.6 lb. (302.5 g)

Specifications:Sensitivity: 0.1 oz/yr (3 g/yr) for all refrigerants, as

low as 0.05 oz/yr (1.5 g/yr) for R12Power Supply: 4.8V NiCd rechargeable battery packBattery Life: 4 to 5 hours of continuous operationSensor Life: 100 hours

Model Description Price19-8031 Basic Refrigerant Leak Detector Kit $439.0019-8034 Deluxe Refrigerant Leak Detector Kit $596.0019-8029 Replacement Refrigerant Sensor $51.0019-0509 Replacement Filters (5/pk.) $8.0019-0497 Protective Rubber Boot $43.0019-0496 Replacement Check Gas $38.00

Model Description PriceZX-1 Refrigerant Leak Detector $559.00

Features:• Compact• Lightweight• Complete: includes probe and instructions

The MW1 detects microwave leakage around doors and fittingson microwave ovens. With oven on, simply move probe tip alongseams of microwave oven door. Colour coding pinpoints leakage:green zone for safe levels, red zone for excess leakage. Compact size and ease of use make the MW1 the perfect choice where H.E.W. approval is not needed.

Rugged and compact, the HI-1501 consists of a lightweightinstrument package connected to the unique detection probe bymeans of a shielded cable. It is virtually immune to failure causedby excessive fields or physical abuse. Three survey ranges areincorporated into a switching sequence which includes a batterycheck and probe check position. The switching sequence pro-vides automatic checking of both batteries and probe beforeeach use. Special electronic circuitry eliminates errors caused bylong and short term drift.

A popular and versatile model. Accuracy, porta-bility and a modest price all account for itswidespread use by oven manufacturersand service technicians, regulatoryagencies and public health officials.


HI-1501 Microwave Survey Meter $1417.00


MW1AK Microwave Leakage Detector $64.00

Specifications:Ranges: 0-2, 0-10, 0-100 mW/cm2

Accuracy: ±1 dB (0-2 and 0-10 scales only)

Response Time: Fast: 1 secondSlow: 2-1/2 seconds(0 to 90% of final value for a step input)

Power Density: 2.0 W/cm2 max.Calibration: At 2450 MHz for use

in I.S.M. bandTemp. Compensation: YesDimensions: 2-1/2" x 3-1/2" x 6"Probe Length: 12 inches/Cable Length: 4 feet

Features:• New meter face with added lines for easier reading• Measurement independent of field polarization• Flip-open latches for quick, easy replacement of batteries• Two 9 volt alkaline batteries• Rugged, attractive carrying case

MICROWAVE SURVEY METER

MICROWAVE LEAKAGE DETECTOR

537M498E

M719E


4070 ELF Magnetic Field Meter $259.004080 ELF Magnetic Field Meter, Triaxial $421.004090 ELF Meter, Triaxial, Extended Range $812.00

Specifications:MODEL 4090 4080 4070# of Axes: 3 3 1Ranges:

Standard 0.1-1999 mG 0.1-511 mG 0.1 - 199.9 mGOptional 0.1-199.9 µT 0.01-51.1 µT

Accuracy Error: ±(1% + 1 dgt) < ±2% typical ±1% + 1 dgt±5% max

Resolution: 0.1 mG 0.1mG 0.1mGFreq. Response:

±5% 50-300 Hz 40-600 Hz 50-300 Hz-3 dB 300-600 Hz 25-1000 Hz 30-600 Hz

Calibration Freq.: 60 Hz 60 Hz 60 HzDimensions: 5.9x3.3x1.2” 4.7x2.4x1.0” 4.7x2.4x 1.0”Weight: 7 oz 5 oz 5 ozGENERALMeasurement Type: True RMSAuto Ranging: YesDisplay: 3 1/2 digit LCDPower Supply: 9 V alkaline batteryBattery LIfe: 50 hours typical

Features:• Ideal for detecting magnetic

field emissions from a widevariety of sources, such asVDTs, power lines, officeequipment, householdappliances, and alltypes of equipment

• Three models available• 0.1 mG resolution• Three axis technology

maintains accuracyregardless of orientation

• True RMS measurement• NIST traceable calibra-

tion at 50/60 Hz• µT scale (optional)• Lightweight and

completelyself-contained

• Complete withdeluxe carryingcase and battery

• Analog and DCoutputs availableupon request

MAGNETIC FIELD METERS

538

Specifications:Measurement Range: 0.1 mG to 199.9 mGFrequency Bandwidth: 30 to 300 Hz (ELF frequency range)Number of Axes: Single axisAccuracy: ±4% at 50-60 HzSampling Time: 2.5X / secondDisplay: 3 1/2 digit LCD, 1/2" (13mm) highOverrange Indication: Displays "1---"Power Supply: Single 9V alkaline batteryDimensions: 5.2" x 2.8" x 1"Weight: 6 oz.


EMF-822A Electromagnetic Field Meter $212.00

Measure electromagnetic radiationlevels from video terminals, fans,faulty wiring, power lines and other equipment

ELECTROMAGNETIC FIELD METER


5060 Gauss/Tesla Meter $1130.005070 Gauss/Tesla Meter $1293.005080 Gauss/Tesla Meter $1780.00

Specifications:Model: 5060 5070 5080Ranges: 2 2 2

From 2 kG 2 kG 300 GTo 20 kG 20 kG 30 kG

Basic Accuracy: ±4% ±2% ±1%Resolution:

Low range 1.0 G (100 µT) 1.0 G (100 µT) 0.1 G (10 µT)High range 10 G (10 µT) 10 G (10 µT) 1.0 G (100 µT)

Readings: Gauss Gauss GaussTesla Tesla Tesla

Amps Amps°C/°F

Display: 3-1/2 dgt LCD 3-1/2 dgt LCD 3-3/4 dgt LCDSampling Rate: 10/sec 10/sec 10/secFreq. Bandwidth: DC DC - 10 kHz DC - 20 kHzGENERALAnalog Output: ±3V F.S.Communication Port: RS-232Power Supply: Two 9V batteriesDimensions: 5.2 x 5.3 x 1.5" (132 x 135 x 38 mm)

FEATURES 5080 5070 5060

Probe Included • • •Auto Zero • • •Max/Min Hold • •True RMS • •Auto Range •True Peak Hold • •Relative Mode •Outputs (analog) •Communication Port(s) •

M1796E

RADIATION MONITOR

GAUSS/TESLA METERS

539

New pocket-size meter measures all forms of ionizing radiation:alpha, beta, gamma and x-rays. Reads milli-roentgens per hourin three measuring ranges (switch selectable). Radiation countsdetected are indicated by a deflection of the needle on the meterscale, as well as by a flashing LED and an audible beeper. Solidstate circuitry and a Geiger-Mueller tube for accuracy and relia-bility.


22168 Radiation Monitor $616.001200C Deluxe Carrying Case $84.00

Specifications:Ranges: 0.5, 5.0, 50.0 mR/hrSensitivity

Alpha: 2.5 Me V w /typical 80% detection efficiencyBeta: 50 ke V w/ typical 35% detection efficiencyGamma & X-rays: 10 ke V typically through end window,

40 ke V min. through caseCalibration: Cesium 137 gammaPower Supply: 9 volt batteryBattery Life: 2000 hoursDimensions: 5.7" x 2.8" x 1.5"Weight: 8.8 oz.

M666E


2M8i Industrial LeadCheck Swab Kit (8) $78.002M16i Industrial LeadCheck Swab Kit (16) $103.00

Tests:• Painted surfaces• Steel structures• Waste materials• sand blasting media• Plumbing• Soil and dust

With the LeadCheck Swabs you can now find and control the country's number one environmentalhealth threat. Easy to use, disposable LeadCheckSwabs will work on any surface, instantly turningbright pink when lead is present. Each swab isready to use. There are no hidden steps or lengthyprocedures. Lead-Check Swabs are odourless, dispos-able and non-staining. The entire test procedure is so convenientthat it can be performed anywhere in 30 seconds. There's even atest confirmation card to verify test results.LeadCheck Swabs are based on the reactivity of lead with cer-tain compounds capable of forming strongly colored complexeswith lead. When LeadCheck Swabs are used, a pink colour thatis specific for lead develops within 30 seconds and is stable forhours.In defined laboratory tests, LeadCheck swabs detect down to 2micrograms of lead with reproducible results. In field tests con-ducted by two separate, independent inspection firms, Lead-Check Swabs reliably detect 0.5% lead in paint with virtually100% accuracy.

540

Scientifically formulated to provide instant leak detection results.To locate leaks, simply apply a small stream of leak detectioncompound towards area being inspected. Compound spreadsquickly to provide lasting bubbles or foam at leakage point.Model 100 - Ideal for compressed air and gaseous systems test-ing. Application with a 12-inch extension tube is quick and easy.A viscosity additive ensures adherence to the surface being test-ed, providing a longer inspection period. Temperature range: 32° to 200°F/0° to 93°C.Model 300 - Formulated for oxygen system testing. MeetsMilitary Specification MIL-L-22567 Type 1. Provides safe, oxygencompatible leak detection results in the location of oxygen leak-age. Temperature range: 27° to 200°F/-3° to 93°C.Available in 8 oz. squeeze bottles, 12 bottles per case

• No residue • Non-corrosive • Non-toxic • Non-flammable


100/B Leak Detection Compound, 1 Case $75.00300 Leak Detection Compound, 1 Case $75.00

LEAD TESTING KIT

LEAK DETECTION COMPOUNDS

541M1618E

Complete Kit includes:• Model 477-1FM Digital Manometer, measures from 0-20 in.

w.c. with ±0.5% accuracy and 9 field selectable units.• Model 471-2 Digital Thermo-anemometer, with 33" adjustable

telescoping tip, measures up to 15,000 fpm or 70 m/s as wellas temperature ranging from 0 to 200°F or -17 to 100°C.

• Model 485-1 Digital Hygrometer• Model 166T Pitot Tube: Stainless steel, 36" telescoping• (2) A-303 Static Pressure Tips with magnetic mounting• (2) 4-1/2 ft. long 3/16" I.D. Rubber Tubing• A-397 Step Drill: 3/16" to 1/2" holes in 1/16" increments• A-532 Air Velocity Slide Chart• (3) 9V batteries• Custom-fitted polyethylene carrying case: 17" x 142" x 42"

ENVIRONMENTAL TEST KIT

ENVIRONMENT METER

ENVIRONMENT METER


PATH Pressure/AV/Temp./RH Test Kit $2044.00


ST-21 5-in-1 Multifunction Environment Meter $108.00


ST-22 4-in-1 Multifunction Environment Meter $115.00

Features:• 5-in-1 multi-tester combines the

functions of a sound level meter,light meter, humidity meter, thermometer and multimeter

• Included accessories: Rubber holster, 9V battery, test leads &temperature probe

Specifications:Light Range/Resolution: 20,000 Lux (0.1 Lux)Sound Range/Resolution: 100 dB (0.1 dB)Humidity Range/Resolution: 95% RH (0.1% RH)Temperature Range: 1300°CDC Current Range: 10ADC Voltage Range: 600VAC Voltage Range: 600VResistance Range: 2MΩ (0.1)Display: 2000-count LCDDimensions: 121 x 60 x 40 mmWeight: 280 g

Features:• 4-in-1 multi-tester combines the

functions of a sound level meter, light meter, humidity meter and thermometer

• Auto shut-off and low battery indication

• Included accessories: Rubber holster, 9V battery & K-type temperature probe

Specifications:Light Range/Resolution: 20,000 Lux (0.1 Lux)Sound Range/Resolution: 100 dB (0.1 dB)Humidity Range/Resolution: 95% RH (0.1% RH)Temperature Range: -20 to 750°C / -4 to 1400°FDisplay: 2000-count LCDDimensions: 121 x 60 x 40 mmWeight: 280 g

Applications:• Measurement of all factors needed to evaluate the environment• Establishment of acceptable conditions in office buildings,

schools, hospitals, shopping malls, etc.• Evaluation of the environment in aircrafts, trains, subways,

buses and other transport vehicles• Checking the effectiveness of the air conditioning and ventila-

tion systems in buildings, vehicles, museums, libraries, theaters

Kit consists of:Model K6010 AnemometerDisplay: 18mm LCD, 4 digitsMeasurement: m/s, km/h, ft/min, mph

Max., Min., Response Time (fast/slow)Ranges: 0.20 - 40.00 m/s, 40 - 7800 ft/min. and

equivalent km/h, mphPower Supply: 006P DC 9V batteryDimensions: 200 x 70 x 36 mm

Model K7010 Sound Level MeterDisplay: 18mm LCD, 3 1/2 digitsMeasurement: A & C weighting, Max., Data hold,

Response (fast/slow) AC/DC outputRanges: A weighting: 30 to 130 dB

C weighting: 30 to 130 dBPower Supply: 006P DC 9V batteryDimensions: 200 x 70 x 36 mm

Model K6020 Humidity/Temperature MeterDisplay: 18 mm LCD, 3 1/2 digitsMeasurement: R.H., Temp (°C/ °F), Data holdRanges: R.H. : 10% to 95% RH

Temp.: 0° to 60°C/32° to 140°FPower Supply: 006P DC 9V batteryDimensions: 200 x 70 x 36 mm

Model K7020 Light MeterDisplay: 13mm LCD, 3 1/2 digitsMeasurement: Lux, Ft-candle (Fc), Data hold, Analog/Digital

outputRanges: Lux: O to 50,000 Lux (3 ranges)

Ft-candle: 0 to 5000 Fc (3 ranges)Sensor Spectrum: Meets C.I.E. photopicPower Supply: 006P DC 9V batteryDimensions: 163 x 70 x 30 mm

Shipped in Model 1500C Protective Case


K100 Environmental Test Kit $1495.00


ST-8820 Multi-function Environmental Meter $295.00

ENVIRONMENTAL METER

ENVIRONMENTAL TEST KIT

M2314E542

Features:• Sound level function can be used to measure noise levels in

factories, schools, offices, studios & auditoriums• Sound Level Range: 35 to 135 dB, A low/high & C low/high• Light function is used to measure luminance in the field• Light Range: 0.01 to 20,000 Lux• Fully cosine corrected for the angular incidence of light• Very stable, long life silicon diode light sensor• Humidity Range: 25 to 95% RH• Semiconductor humidity sensor• Temperature Range: -20.0 to 750°C / -4 to 1400°F• Type K thermocouple input for temperature measurements• Data Hold & Max Hold• Auto shut off & low battery indication• Included accessories: carrying case, K-Type temperature probe

& 9V battery

combustible gas detectors - terraceneterracene.com/docs/test_instruments/terracene_499_542.pdf ·...

Documents