comandos voip.docx

8/11/2019 comandos voip.docx

1/8

Router 1

Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int fa 0/0

Router(config-if)#ip add 10.0.0.1 255.255.255.0

Router(config-if)#no sh

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

ex

Router(config)#no ip domain-loo

Router(config)#ip dhcp pool VOZ1

Router(dhcp-config)#network 10.0.0.0 255.255.255.0

Router(dhcp-config)#default-router 10.0.0.1

Router(dhcp-config)#?

default-router Default routers

dns-server Set name server

exit Exit from DHCP pool configuration mode

network Network number and mask

no Negate a command or set its defaults

option Raw DHCP options

Router(dhcp-config)#option 150 ip 10.0.0.1 ?


2/8

Router(dhcp-config)#option 150 ip 10.0.0.1

Router(dhcp-config)#exit

Router(config)#te

Router(config)#telephony-service

Router(config-telephony)#max-dn 10

Router(config-telephony)#max-ephones ?

Maximum phones to support

Router(config-telephony)#max-ephones 10

Router(config-telephony)#?

auto Define dn range for auto assignment

auto-reg-ephone Enable Ephone Auto-Registration

create create cnf for ethernet phone

exit Exit from telephony config mode

ip Define IP address and port for Telephony-Service/Fallback

keepalive Define keepalive timeout period to unregister IP phones

max-dn Maximum directory numbers supported

max-ephones Define max number of IP phones

no Negate or set default values of a command

Router(config-telephony)#ip s

Router(config-telephony)#ip source-address ?

A.B.C.D Define IP source address

Router(config-telephony)#ip source-address 10.0.0.1 port 2000

Router(config-telephony)#ex

Router(config)#ephone-dn 1

Router(config-ephone-dn)#%LINK-3-UPDOWN: Interface ephone_dsp DN 1.1, changed state to up


3/8

Router(config-ephone-dn)#number 100

Router(config-ephone-dn)#exit




Router(config-ephone-dn)#ex





Router(config)#ephone 1

Router(config-ephone)#m

Router(config-ephone)#mac-address 0001.631d.1e97

Router(config-ephone)#type ?

7960 Cisco IP Phone 7960

CIPC Cisco IP Phone CIPC

ata ATA phone emulation for analog phone

Router(config-ephone)#type 7

Router(config-ephone)#button 1:1

Router(config-ephone)#ex


Router(config-ephone)#ma

Router(config-ephone)#mac-address 0001.6433.3064


4/8

Router(config-ephone)#ty


Router(config-ephone)#bu


Router(config-ephone)#EX

Router(config)#



Router(config-ephone)#mac-address 0009.7C60.854E

Router(config-ephone)#type c

Router(config-ephone)#type cIPC



Router(config)#do wr

Building configuration...

[OK]

Router(config)#

Router 2

Press RETURN to get started!

Router>en


5/8

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip add 192.168.0.1 255.255.255.0

Router(config-if)#no sh

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#ex

Router(config)#ip dhcp pool voz2

Router(dhcp-config)#ne

Router(dhcp-config)#network 192.168.0.0 255.255.255.0

Router(dhcp-config)#de

Router(dhcp-config)#default-router 192.168.0.1

Router(dhcp-config)#o

Router(dhcp-config)#option 150

Router(dhcp-config)#option 150 ip 192.168.0.1

Router(dhcp-config)#ex

Router(config)#te

Router(config)#telephony-service

Router(config-telephony)#max-dn 10

Router(config-telephony)#max-e

Router(config-telephony)#max-ephones 10


6/8

Router(config-telephony)#ip

Router(config-telephony)#ip source-address 192.168.0.1 P

Router(config-telephony)#ip source-address 192.168.0.1 Port 200

^

% Invalid input detected at '^' marker.

Router(config-telephony)#ip source-address 192.168.0.1 Port 2000

Router(config-telephony)#EX









Router(config)#



Router(config-ephone)#mac-address 0005.5e95.c445

Router(config-ephone)#ty



Router(config-ephone)#but


7/8





Router(config-ephone)#mac-address 0002.16d0.1801

Router(config-ephone)#typ

Router(config-ephone)#type ata



Router(config)#

Router(config)#dial-peer voice 20 voip

Router(config-dial-peer)#?

destination-pattern A full E.164 telephone number prefix

exit Exit from dial-peer configuration mode


session The session [ target | protocol | transport ] for this

peer

Router(config-dial-peer)#des

Router(config-dial-peer)#destination-pattern 2..

Router(config-dial-peer)#?

destination-pattern A full E.164 telephone number prefix

exit Exit from dial-peer configuration mode



8/8

session The session [ target | protocol | transport ] for this

peer

Router(config-dial-peer)#se

Router(config-dial-peer)#session t

Router(config-dial-peer)#session target ipv4:172.16.0.2

Router(config-dial-peer)#do wr

Building configuration...

[OK]

Router(config-dial-peer)#

comandos voip.docx

Documents