coluna e monitor de chao activa 12 2 vias 720w - manual sonigate

4
SEM712A/SEM715A Active 12” 2-Way Stage/Floor Speaker Active 15” 2-Way Stage/Floor Speaker Safety Instructions 1. Read all instructions carefully before using your speakers 2. Keep this safety and instruction flier for future reference 3. Ensure you follow all instructions carefully 4. When used in conjunction with Amplifiers or Powered Mixers ensure you follow the correct procedures in the set up and turning on and off of audio equipment. It is advisable, when an entire sound system is set up, that the power amplifier or powered mixer that you are using is turned on last (ie. That any source equipment, such as guitars, tape decks, etcetera, are turned on first). After all source equipment is turned on and have stabilized, ensure the power amp or powered mixer’s level control is set to a minimal level and then activate, after which the level control can be set to a reasonable level. This should be done in reverse when shutting down: turn off the power amp or powered mixer first, then turn off all other devices. However many professional amplifiers feature delayed on/off circuits that can perform this automatically. 5. Warning – These Speakers generate extremely high sound pressure levels. Ensure you take care in the placement and operation to avoid exposure to extremely high sound levels, to reduce to risk of causing permanent hearing damage. 6. Cables – Under no circumstances should you use shielded or microphone cables for connecting speakers to amplifiers. These cables are not heavy enough to be able to handle the amplifier load and could cause irreversible damage to your system. 7. Mounting – The suspending, rigging and mounting of the Speakers can cause members of the public to be exposed to serious health risk, as well as the possibility of death. If you are NOT fully qualified and certified to mount these speakers by relevant local, state, or national authorities, do not under any circumstances try to rig, suspend or mount this system. All relevant safety regulations must be followed. If you are not completely qualified or do not know of said regulations, ensure you consult qualified personnel for assistance. 8. Servicing – Do not under any circumstances try to service this product by yourself. If servicing is required, contact your local service center. Features l Double duty: use as a floor monitor or mounted as a raised sound reinforcement speaker l Built-in amplifier (RMS): 180 W l Frequency response: 50 Hz - 20 khz l High sound pressure level, 122 dB SPL @ 1W / 1M l 15” heavy-duty woofer and piezo tweeter (SEM 715A) l 12” heavy-duty woofer and piezo tweeter (SEM 712A) l Built-in handle l 35 mm stand adapter built-in l 1/4” jacks & XLR inputs l Link speakers through XLR output Introduction The SEM712A and SEM 715A Active Speakers are 2-way speak- ers designed to accommodate professional applications that re- quire both portability and impeccable sound quality. Both models output up to 180 Watts (RMS) / 360 Watts (program) / 720 Watts (peak), and feature XLR and 1/4” jacks for input of audio, as well as an XLR output for linking of speakers. Where the two models differ, however is that the SEM 712A features a 12” woofer and piezo tweeter, whereas the SEM 715A features a 15" woofer and piezo tweeter. Both models work as both raised sound reinforce- ment speakers and floor monitors, depending on the necessary application, and are enclosed in a black-carpeted casing. PHONIC

Upload: sonigate

Post on 30-Mar-2016

218 views

Category:

Documents


0 download

DESCRIPTION

Introduction Safety Instructions l Double duty: use as a floor monitor or mounted as a raised sound reinforcement speaker l Built-in amplifier (RMS): 180 W l Frequency response: 50 Hz - 20 khz l High sound pressure level, 122 dB SPL @ 1W / 1M l 15” heavy-duty woofer and piezo tweeter (SEM 715A) l 12” heavy-duty woofer and piezo tweeter (SEM 712A) l Built-in handle l 35 mm stand adapter built-in l 1/4” jacks & XLR inputs l Link speakers through XLR output PHONIC

TRANSCRIPT

Page 1: Coluna e Monitor de Chao Activa 12  2 Vias 720W - Manual Sonigate

SEM712A/SEM715AActive 12” 2-Way Stage/Floor Speaker Active 15” 2-Way Stage/Floor Speaker

Safety Instructions1. Read all instructions carefully before using your speakers2. Keep this safety and instruction flier for future reference3. Ensure you follow all instructions carefully4. When used in conjunction with Amplifiers or Powered Mixers

ensure you follow the correct procedures in the set up and turning on and off of audio equipment. It is advisable, when an entire sound system is set up, that the power amplifier or powered mixer that you are using is turned on last (ie. That any source equipment, such as guitars, tape decks, etcetera, are turned on first). After all source equipment is turned on and have stabilized, ensure the power amp or powered mixer’s level control is set to a minimal level and then activate, after which the level control can be set to a reasonable level. This should be done in reverse when shutting down: turn off the power amp or powered mixer first, then turn off all other devices. However many professional amplifiers feature delayed on/off circuits that can perform this automatically.

5. Warning – These Speakers generate extremely high sound pressure levels. Ensure you take care in the placement and

operation to avoid exposure to extremely high sound levels, to reduce to risk of causing permanent hearing damage.

6. Cables – Under no circumstances should you use shielded or microphone cables for connecting speakers to amplifiers. These cables are not heavy enough to be able to handle the amplifier load and could cause irreversible damage to your system.

7. Mounting – The suspending, rigging and mounting of the Speakers can cause members of the public to be exposed to serious health risk, as well as the possibility of death. If you are NOT fully qualified and certified to mount these speakers by relevant local, state, or national authorities, do not under any circumstances try to rig, suspend or mount this system. All relevant safety regulations must be followed. If you are not completely qualified or do not know of said regulations, ensure you consult qualified personnel for assistance.

8. Servicing – Do not under any circumstances try to service this product by yourself. If servicing is required, contact your local service center.

Features

l Double duty: use as a floor monitor or mounted as a

raised sound reinforcement speaker

l Built-in amplifier (RMS): 180 W

l Frequency response: 50 Hz - 20 khz

l High sound pressure level, 122 dB SPL @ 1W / 1M

l 15” heavy-duty woofer and piezo tweeter (SEM 715A)

l 12” heavy-duty woofer and piezo tweeter (SEM 712A)

l Built-in handle

l 35 mm stand adapter built-in

l 1/4” jacks & XLR inputs

l Link speakers through XLR output

Introduction

The SEM712A and SEM 715A Active Speakers are 2-way speak-ers designed to accommodate professional applications that re-quire both portability and impeccable sound quality. Both models output up to 180 Watts (RMS) / 360 Watts (program) / 720 Watts (peak), and feature XLR and 1/4” jacks for input of audio, as well as an XLR output for linking of speakers. Where the two models differ, however is that the SEM 712A features a 12” woofer and piezo tweeter, whereas the SEM 715A features a 15" woofer and piezo tweeter. Both models work as both raised sound reinforce-ment speakers and floor monitors, depending on the necessary application, and are enclosed in a black-carpeted casing.

PHONIC

Page 2: Coluna e Monitor de Chao Activa 12  2 Vias 720W - Manual Sonigate

Specifications

Suggested Setup Methods

Full Range System with Crossover

Full Range System

SEM 712A SEM 715A

Type 12” 2-way Stage/Floor Monitor Speaker

15” 2-way Stage/Floor Monitor Speaker

Built-in Amplifier (Watts) RMS 180 180

Frequency Response 60 ~ 20 kHz 50 ~ 20 kHz

Max SPL @ 1 W / 1 M 120 dB 122 dB

Built-in Crossover Yes Yes

Dispersion Angle (Degrees) 90 x 40 90 x 40

Box N/A N/A

Appearance Black Carpet Black Carpet

Handles 2 2

Stand Socket 35mm 35mm

Connector XLR + 1/4” phone jacks XLR + 1/4” phone jacks

Dimensions cm/in. (HxWxD) 540 x 376 x 356 mm (21.3” x 14.8” x 14.0”)

679 x 476 x 388 mm (26.7” x 18.7” x 15.3”)

Net Weight >13 kg >19 kg

Page 3: Coluna e Monitor de Chao Activa 12  2 Vias 720W - Manual Sonigate

6103 Johns Road #7

Page 4: Coluna e Monitor de Chao Activa 12  2 Vias 720W - Manual Sonigate