codigos de falla cummins

3
26/ 10/12 Mack 1/3 No se ha podido establecer conexión con

Upload: crecencio-sanches

Post on 11-Oct-2015

171 views

Category:

Documents


6 download

TRANSCRIPT

  • 26/10/12 Mack

    1/3

    CUMMINS

    Cdigo Descripcin

    115R No. engine speed signal detected

    121Y No engine speed signal detected

    122Y V-High boost pressure

    123Y V-Low boost pressure

    131R V-High throttle position

    132R V- Low throttle position signal

    135Y High voltage oil pressure signal

    141Y Low voltage oil pressure

    143EP V-high, oil pressure signal

    144Y High voltage coolant temperature

    145Y Low voltage coolant temperature

    151EP V-High coolant temperature signal

    153Y V-High manifold air temperature

    154Y V-Low manifold air temperature

    155EP VH manifold air temperature signal

    212Y V-High oil temperature signal

    213YV-Low oil temperature signal .......

    214EP V-High oil temperature signal

    221Y V-High ambient air pressure signal

    222Y V-Low ambient air pressure signal

    234R H-rpm speed signal indicated

    235EP V-Low coolant level low

    241Y Vehicle speed signal has been lost

    242Y Fault Vehicle speed signal

    243Y E-brake relay faulty ECM power

    245Y Less than 6 volts fan clutch

    No se ha podido establecer conexin con

    Internet

  • 26/10/12 Mack

    2/3autocom.co.cr/camiones/codigos/Cummins.htm

    254R Less than 6 fuel shutoff solenoid

    255Y Externally voltage fuel shutoff

    311Y Current detected at No. 1 injector

    312Y Current detected at No. 5 injector

    313YCurrent detected at No. 3 injector .......

    314Y Current detected at No. 6 injector

    315Y Current detected at No. 2 injector

    321Y Current detected at No. 4 injector

    322Y No current detected at No.1 inject

    323Y No current detected at No.5 inject

    324Y No current detected at No.3 inject

    325Y No current detected at No.6 inject

    331Y No current detected at No.2 inject

    332Y No current detected at No.4 inject

    333Y No voltage detect on the inject.

    335RRAM read/write error inside ECM .......

    341R ROM read/write error inside ECM

    342R ECM not calibrated EEPROM

    343Y Micro-processor error inside ECM

    351Y Inject power supply fault ECM

    352Y Not voltage detected at ECM

    411Y Data transmission error

    412Y Data transmission error

    413Y Data transmission error

    414Y Data transmission

    415EP V-High signal oil pressure

    422Y Fault coolant level

    431Y Fault idle validation-off and idle

    432RFault idle validation on-idle signal .......

    433Y High boost pressure

  • 26/10/12 Mack

    3/3autocom.co.cr/camiones/codigos/Cummins.htm