cmc mixing system - inoxpa.com tecnica/equips/cm… · the cmc mixing unit is a system designed for...
TRANSCRIPT
MSCMC Mixing System
I ApplicationThe CMC mixing unit is a system designed for a fast dispersion of hydrocolloid products such as carboxymethylcellulose (CMC), flours, carbopol, pectin, and guar or xanthan gum. These additives are widely used in industry on account of their multiple properties: as thickeners, jellifying agents, stabilisers, complexing agents, etc. In the food industry, these additives provide texture, body, consistency and stability to food products. In the cosmetics industry they are used as thickeners, stabilisers, suspending agents and film formers in creams, lotions or shampoo.
I Operating principleHydrocolloid compounds are usually available in dry powder form, which must be diluted in water to obtain the desired colloidal solution.When these powders come into contact with water, lumps quickly form and it is difficult to obtain a homogeneous mixture using a conventional agitator. To overcome this problem, this mixing unit incorporates a rotor-stator mixer at the bottom of the tank that shears the product, thereby increasing the water-additive contact area.A cowles-type agitator fitted in the tank allows efficient circulation of the powder to the mixerlower head and also helps improve the dispersion time.When the process requires working with high powder percentages, the use of hot water can be an important factor as this allows the viscosity to be significantly increased. For such cases, the available options include a heating jacket and the replacement of the cowles-type propeller with another suitable agitation element such as anchor.With its standard configuration, this equipment is prepared to work with products of up to 5000 cP. In case of more viscous products, this configuration should be adapted for this purpose.
I Design and featuresAISI 316L stainless steel vertical unit.Vertical agitator with cowles propeller.Tank bottom high-shear mixer.Maximum and minimum level probe.Powder adding and inspection manhole with safety sensors. Clean-in-place (CIP) diffuser balls.Manual butterfly valves for disharge and cleaning.Pressure-vaccum valve for tank protection.Electrical control panel.
I Technical specificationsMaterials:Parts in contact with the product AISI 316LOther materials AISI 304LGaskets in contact with the product EPDM
Surface finish:Internal 2B, with removed and polished welds Ra ≤ 0.8 μmExternal 2B, with brushed, washed and passivated welds
Operating limits:Capacity 500L and 1000LWorking pressure AtmosphericWorking temperature Ambient (simple system without jacket)
®
CMCMixing System
FTso
lCM
C.2
.EN
_011
9
The information is for guidance only. We reserve the right to modify any material or feature without notice in advance.Photos are not binding. For further information, please, consult our web site
I Options
Product discharge pump.Skid-mounted discharge pump.Pump protection level.Jacketed and insulated tank.Hot water generating system with electric resistance(-s) .Anchor-type agitator or other agitation element according to client’s requirements.Y-filter at the pump outlet.Hygienic sampling valve.
I Dimensions of CMC mixing system 500L
2
www.inoxpa.com
®
2630
2630 955955
1000
1000
1600
1600
423
423
771
771
750
750
923
923
3
2,52,5
3
1000
1000
500L500L
CMCMixing System
FTso
lCM
C.2
.EN
_011
9
The information is for guidance only. We reserve the right to modify any material or feature without notice in advance.Photos are not binding. For further information, please, consult our web site.
I Dimensions of CMC mixing system 1000L
2
www.inoxpa.com
®
2727
2727 13001300
1600
1600
1000
1000
731
731
1000
1000
12001200
3
3
3
179
179
1000L1000L
B