cm cady catalog
TRANSCRIPT
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 1/67
LIFTING BEAMS
SPREADER BEAMS
ROLL LIFTERS
COIL LIFTERS& UPENDERS
SHEET LIFTERS
PALLET LIFTERS
LIFTING TONGS
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 2/67
Columbus McKinnon has been manufacturing material handling
equipment for over 138 years. It is our goal to manufacture high quality,
long lasting lifting products that will safely increase productivity.
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 3/67
INDEX
CM CADY BELOW THE HOOK LIFTERS
LIFTING BEAMS
Economy ....................................... 2-5
Low Headroom..............................6-8
High-Capacity Lifting Beam .............9
Heavy Duty Basket Beam...............10
Twin Hoist ........................................11
Adjustable Bail.................................12
Load Leveling ............................13-14
Bulk Container Beam......................15
3 & 4 Point Pick-up ...................15-16
Twin Hoist Rotating .........................17
Chlorine Cylinder.............................17
SPREADER BEAMSFixed ................................................20 Adjustable .......................................21
ROLL LIFTERS
Beams..............................................24
Tongs................................................25
Grabs ...............................................25
Motorized.........................................25
C-Hook ............................................26
Positioner.........................................26
COIL LIFTERS & UPENDERS
Narrow Coil ................................28-29
C-Hooks.....................................30-32
Vertical “Eye” .............................33-34
Two Sided ..................................35-37
Parking Stands................................38
Upenders ...................................39-40
APPLICATION EVALUATIONS
Lifting Beams...................................56
Roll Lifters........................................57
Coil Lifters & Upenders...................58
Sheet Lifters.....................................59
Tongs................................................60
SHEET LIFTERS
Plate Lifter........................................42
Heavy Duty ......................................43
Small Bundle ...................................44
Standard Duty .................................44
Adjustable Load Lifter.....................46
Wheeled, Lightweight .....................47
Fixed Forks......................................48
Adjustable Forks........................49-50
LIFTING TONGS
Overview..........................................52
Friction .............................................52
Bale ..................................................53
Die Tongs.........................................54
PALLET LIFTERS
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 4/67
CM CADY BELOW THE HOOK LIFTERS
Below-The-Hook Lifters are devices (excluding slings) that attach hoists to their loads.These lifters can be categorized into 3 types:
Supporting - Carries the load on a bearing surface(s).
Indentation - Grip force indents the sides of the load.
Friction - Applies sufficient coefficient of friction to support the load.
The benefits of CM Cady Lifters: Increased productivity Increased safety of an engineered product Low costs maintenance Reliability and durability
for long lasting service
Every CM Cady Lifter has a Registered Nameplate as requiredby ASME, a BTH Rated Capacities Label, and a Product Safety Label.
DISCLAIMER: ALL PRODUCT DESIGNS ARE SUBJECT TO CHANGE WITHOUT NOTICE. PRODUCTS
PICTURED IN THIS CATALOG ARE A REPRESENTATION OF A SPECIFIC DESIGN. THE PRODUCT YOU
PURCHASE WILL BE DESIGNED FOR YOUR SPECIFIC APPLICATION AND MAY NOT LOOK EXACTLY
LIKE THE PICTURE IN THIS CATALOG.
QUALITY & ENGINEERING
TWO QUICK DELIVERY PROGRAMS
In-Stock products ship in 3 to 5 days.*
Look for this green logo and specific in-stock model numbershighlighted in green for standard products.
QuickShip products ship in 10 to 14 days.*Look for this red logo and specific model numbers highlightedin red for standard products.
TRAINING
The CMCO Training Department can help you increase
the productivity and reliability of your equipment, while
ensuring the safety of your workforce. Our training programs
cover proper maintenance, inspection and operation of
rigging, hoists and cranes. Visit www.cmworks.com/trainingfor more information and class schedules.
INDUSTRY STANDARDS
The American Society of Mechanical Engineers (ASME)
has developed standards that apply specifically to the devices
CM Cady designs. ASME B30.20 provides detailed informa-
tion on the classifications, marking, construction, installation,
inspection, testing, maintenance, and operation of below
the hook lifting devices. ASME BTH-1 provides detailed infor-
mation on the design criteria of below the hook lifting devices.
ASME B30.9 provides detailed information on the fabrication,
markings, usage, inspection, and maintenance of lifting slings.
These standards serve as a guide to government authorities,
manufacturers, purchasers and users of lifting devices.
CM Cady Standard Quality Assurance program follows
specific design criteria as required by ASME. If you would like
your lifter proof tested and a test certificate issued, please
specify at the time of order (there is a nominal charge).
* Estimated Quick Ship program shipping times exclude weekends and holidays.
) ) IN-STOCK
) ) QUICKSHIP
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 5/67
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 6/67
MPBMULTIPLE PURPOSE LIFTING BEAM
L I F T I NG
PRODUCT FEATURES
Has adjustable lifting points. Can handle both wide
and unbalanced loads.
Low headroom capability.
Shackles included.
Converts to spreader beamwith addition of top rigging.
Optional swivel hooks available.
Optional chain top rigging available.
Complies with ASME standards.
CM CADY BELOW THE HOOK LIFTERS2
Bolt Type Rated Spread Bail HR Anchor Shackle
Model Capacity (in.) Adjustment Headroom (tons) Weight
Number (tons) Max. Min. (in.) ( in.) Top Bottom (lbs.)
MPB5004 1/4 48 12 16 7.1 1 1/2 1 1/2 37
MPB10006 1/2 72 36 24 9.94 1 1/2 1 1/2 76
MPB16 1 72 36 24 9.94 1 1/2 1 1/2 76
MPB26 2 72 36 24 12.6 3 1/4 2 128
MPB48 4 96 48 32 16.6 4 3/4 4 3/4 270
MPB510 5 120 60 40 20.2 6 1/2 4 3/4 445
MPB712 7 144 72 48 23.8 8 1/2 6 1/2 755
SPECIFICATIONS
PRODUCT OPTIONS
OPTION S - Pair of swivel hooks
OPTION C - Chain top rigging
Cross beams (one or two)specify spread(s),contact CM CADY Applications.
STANDARD 2 POINT LIFT
CUSTOM 3 POINT LIFT
CUSTOM 4 POINT LIFT
APPLICATIONS
Products highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 7/67
ALB ADJUSTABLE LIFTING BEAM
PRODUCT FEATURES
Bail adjusts horizontally for lifting unbalanced loads.
Provides clearance in low headroom applications.
Spread adjusts in 6" increments along lifting beam.
Shackles included.
Optional swivel hooks available.
Complies with ASME standards.
PRODUCT OPTIONS OPTION S - Pair of swivel hooks
CM CADY BELOW THE HOOK LIFTERS
Bail adjusted
for unbalanced load
Lift points adjusted
for load length
Products highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
Rated Spread Bail Adjustment HR ShackleModel Capacity (in.) Range D Headroom Size Bail Dimensions (in.) Weight
Number (tons) Max. Min. (in.) (in.) (in.) (tons) A B C T (lbs.)
ALB25006 1-1/4 72 36 24 3 14.7 2 1 1/2 3 5 5/8 150
ALB26 2 72 36 24 3 14.7 2 1 1/2 3 5 5/8 155
ALB48 4 96 54 36 6 19.8 3 1/4 2 4 7 3/4 285
ALB510 5 120 60 36 6 22.4 4 3/4 2 4 7 1 475
SPECIFICATIONS
APPLICATION
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 8/67
TBSBFIXED TWIN BASKET SLING LIFTING BEAM
C
B
A
HR
T
O
SPREAD 2SPREAD 1
SPECIFICATIONS
Model Number Spread (feet) Other Capacity HR Headroom (in.) Dimensions (tons) Weight (lbs.) 3* 4* 6 8 10 12 (in.)
Model Number TBSB10003 TBSB10004 TBSB10006 TBSB10008 TBSB100010 TBSB100012 A=7/8 T=3/4 1/2 HR Headroom 8-1/2 8-1/2 8-1/2 8-1/2 8-1/2 9-1/2 B=3 O=2
Weight 40 48 78 95 113 171 C=5 Model Number TBSB13 TBSB14 TBSB16 TBSB18 TBSB110 TBSB112 A=7/8 T=3/4 1 HR Headroom 8-1/2 8-1/2 9-1/2 10-1/2 10-1/2 11-1/2 B=3 O=2 Weight 40 48 93 136 175 239 C=5
Model Number TBSB23 TBSB24 TBSB26 TBSB28 TBSB210 TBSB212 A=7/8 T=3/4 2 HR Headroom 9-1/2 10-1/2 10-1/2 11-1/2 12-1/2 13-1/2 B=3 O=2 Weight 52 75 139 169 246 326 C=5
Model Number TBSB53 TBSB54 TBSB56 TBSB58 TBSB510 TBSB512 A=2 T=1-1/4 5 HR Headroom 13-1/2 14-1/2 15-1/2 16-1/2 17-1/2 19-1/2 B=4 O=2 Weight 104 135 211 310 423 618 C=7
Model Number TBSB753 TBSB754 TBSB756 TBSB758 A=2 T=1-1/4 7 1/2 HR Headroom 12 14 15 17 B=4 O=2 Weight 125 185 315 475 C=7
* 3 ft. and 4 ft. beams are provided with one set of bent bar hooks.
L I F T I NG
PRODUCT FEATURES
Designed to be used with slings in a basket hitch.
Provides greatest clearance in low headroom applications.
Two sets of bent bar hooks are standard on units with a spread of 6 feet and greater.
Spread 2 is 1/2 of spread 1.
Hooks are designed to handle up to a 2" sling eye width.
Complies with ASME standards.
CM CADY BELOW THE HOOK LIFTERS4 Products highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
APPLICATION
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 9/67
SPECIFICATIONS
FLBFIXED SPREAD LIFTING BEAM
PRODUCT FEATURES
Provides clearance in low headroom applications.
Eye hooks with hook latches standard.
Fixed spread.
Complies with ASME standards.
CM CADY BELOW THE HOOK LIFTERSProducts highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
APPLICATION
Capacity(tons)
Model NumberHR Headroom (in.)
Weight (lbs.)
Spread (feet)Other Dimensions
(in.)2 3 4 6 8 10
1/2Model NumberHR Headroom
Weight
FLB1000213-1/4
20
FLB1000313-1/4
26
FLB1000413-1/4
33
FLB1000613-1/4
48
FLB1000814-1/4
75
FLB10001014-1/4
93
A = .75 O = .89B = 3C = 5
1Model NumberHR Headroom
Weight
FLB1214-1/3
26
FLB1314-1/3
35
FLB1414-1/3
44
FLB1615-1/3
72
FLB1815-1/3
93
FLB11016 1/3
131
A = 1 O = .89B = 6C = 5
2Model NumberHR Headroom
Weight
FLB2316-3/4
45
FLB2416-3/4
55
FLB2617-3/4
108
FLB2819-3/4
140
FLB21019-3/4
188
A = 1 O = 1B = 6C = 5
3Model NumberHR Headroom
Weight
FLB331858
FLB342087
FLB3620
118
FLB3820
222
FLB31020
272
A = 1.5 O = 1B = 6C = 5
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 10/67
LHB LOW HEADROOMMULTIPLE SPREAD LIFTING BEAM
L I F T I NG
PRODUCT FEATURES Beams over 4 feet have 3 spreads.
3 feet & 4 feet beams have 2 spreads.
Swivel hooks with hook latches standard.
Wide range of sizes and capacities available.
Complies with ASME standards.
3 spreads to adjust to the load • Outside spread • Middle spread (outside less 1 ft.) • Inside spread (outside less 2 ft.)
CM CADY BELOW THE HOOK LIFTERS6
Other sizes available, consult factory.
SPECIFICATIONS
Model Number Outside Spread (feet)
Capacity HR Headroom (in.)(tons) Weight (lbs.) 3 4 6 8 10 12 14
Model Number LHB10003 LHB10004 LHB10006 LHB10008 LHB100010 LHB100012 LHB100014 1/2 HR Headroom 12-3/4 12-3/4 12-3/4 12-3/4 13-3/4 13-3/4 14-3/4 Weight 40 50 65 95 140 160 230
Model Number LHB13 LHB14 LHB16 LHB18 LHB110 LHB112 LHB114 1 HR Headroom 12-3/4 12-3/4 13-3/4 13-3/4 14-3/4 15-3/4 16-3/4 Weight 40 50 85 115 165 230 320
Model Number LHB23 LHB24 LHB26 LHB28 LHB210 LHB212 LHB214
2 HR Headroom 13-3/4 13-3/4 14-3/4 16-1/2 17-1/2 18-1/4 20-1/4 Weight 50 65 100 165 230 315 480
Model Number LHB33 LHB34 LHB36 LHB38 LHB310 LHB312 LHB314 3 HR Headroom 15-1/4 15-1/4 16-1/4 17-1/4 18-1/4 22-1/2 24-1/2 Weight 70 80 140 200 275 415 650
Model Number LHB53 LHB54 LHB56 LHB58 LHB510 LHB512 LHB514 5 HR Headroom 19-1/2 20-1/2 21-1/2 25-1/2 25-1/2 27-1/2 27-1/2 Weight 115 145 205 325 390 580 690
Model Number LHB753 LHB754 LHB756 LHB758 LHB7510 LHB7512 LHB7514 7-1/2 HR Headroom 22-1/2 23-1/2 25-1/4 27-1/4 27-1/4 30-1/4 30-1/4 Weight 135 170 265 415 500 910 1070
Model Number LHB103 LHB104 LHB106 LHB108 LHB1010 LHB1012 LHB1014 10 HR Headroom 23-1/4 25-1/4 27-1/4 27-1/4 30-1/4 30-1/4 30-1/4 Weight 150 205 335 420 775 910 1075
Model Number LHB153 LHB154 LHB156 LHB158 LHB1510 LHB1512 LHB1514 15 HR Headroom 28-1/2 30-1/2 30-1/2 33-1/2 33-1/2 40-1/4 40-1/4 Weight 215 295 375 685 820 1180 1385
Model Number LHB203 LHB204 LHB206 LHB208 LHB2010 LHB2012 20 HR Headroom 38-3/4 38-3/4 38-3/4 38-3/4 41-1/2 41-1/2 Weight 370 435 575 710 1070 1235
Model Number LHB254 LHB256 LHB258 LHB2510 LHB2512 25 HR Headroom 41-3/8 41-3/8 44-3/8 44-3/8 44-3/8 Weight 470 590 925 1100 1650
Model Number LHB304 LHB306 LHB30830 HR Headroom 45-1/2 45-1/2 48-1/4
Weight 525 660 1010
Model Number LHB404 LHB40640 HR Headroom 44-3/4 47-3/4
Weight 600 930
Products highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
Ideal where headroom is limited.
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 11/67
CM CADY BELOW THE HOOK LIFTERS
Outside Spread (feet)
Other 16 18 20 24 30 Dimensions (in.)
LHB100016 LHB100018 LHB100020 LHB100024 LHB100030 A=7/8 T=3/4 15-3/4 16-3/4 16-3/4 20-1/4 22-1/4 B=3 O=7/8 305 400 450 830 1340 C=5
LHB116 LHB118 LHB120 LHB124 A=7/8 T=3/4 18-1/2 20-1/4 20-1/4 22-1/4 B=3 O=7/8 415 605 675 1095 C=5
LHB216 LHB218 LHB220 LHB224 A=7/8 T=3/4
20-1/4 24-3/4 24-3/4 27-3/4 B=3 O=7/8 540 800 900 1730 C=5
LHB316 LHB318 LHB320 LHB324 A=1-1/4 T=1 24-1/2 27-1/2 27-1/2 27-1/2 B=3 O=1 730 1295 1450 1765 C=5
LHB516 LHB518 LHB520 LHB524 A=2 T=1-1/4 30-1/4 30-1/4 30-1/4 33-1/4 B=4 O=1-3/8 1210 1340 1505 2275 C=7
LHB7516 LHB7518 A=2 T=1-1/4 30-1/4 33 B=4 O=1-1/2 1210 1665 C=7
LHB1016 LHB1018 A=2 T=1-1/4 33 33 B=4 O=1-9/16 1500 1670 C=7
A=2-1/2 T=1-1/2 B=5 O=2-1/16 C=9
A=2-1/2 T=1-1/2 B=5 O=2-1/4 C=9
A=3 T=1-3/4 B=6 O=2-1/4 C=12
A=3-1/2 T=2 B=7 O=2-1/4 C=16
A=3-1/2 T=2-1/2 B=7 O=3 C=16
SPECIFICATIONS
OPTION B
FaspinsFor ease of positioning hooks
with quick release.Specify number required.
OPTION C
Extra Hooks Allows for multiple pick points.
Specify number required.
OPTION D
Pin Type Bail
Lifting pin located between
structural channel. (Hoist hook
information must be supplied.)
OPTION E
Shackle LugLifting lug with shackle.
(Headroom may change.)
OPTION A
Extra Holes or DifferentPlacement of Holes
Allows multiple hook positioningbeyond standard 3 spreads.
Specify number & spread(s) required.
Recommend Faspins (Option B) if frequent hook position changes (spread) are required.
Products highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
SEEPAGE8
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 12/67
LHMB LOW HEADROOMMULTIPLE SPREAD LIFTING BEAM
L I F T I NG
PRODUCT FEATURES“I” beam construction.
Three spreads to adjust to the load • Outside spread • Middle spread (outside less 1 ft.) • Inside spread (outside less 2 ft.)
Swivel hooks with hook latches standard.
Wide range of sizes and capacities available.
Complies with ASME standards.
CM CADY BELOW THE HOOK LIFTERS8
Model Number Outside Spread (feet) Other Capacity Headroom (in.) Dimensions (tons) Weight (lbs.) 8 10 12 14 16 18 20 24 30 (in.)
Model Number LHMB1301 HR Headroom 27.5
Weight 1500
Model Number LHMB230
2 HR Headroom 27.5Weight 1600
Model Number LHMB3303 HR Headroom 29.5
Weight 1900
Model Number LHMB5305 HR Headroom 31.75
Weight 2310
Model Number LHMB7520 LHMB7524 LHMB7530 7-1/2 HR Headroom 34.75 34.75 35 Weight 1325 1890 2790
Model Number LHMB1020 LHMB1024 LHMB1030 10 HR Headroom 35.75 36 37.75 Weight 1465 2075 3150
Model Number LHMB1516 LHMB1518 LHMB1520 LHMB1524 LHMB1530 15 HR Headroom 41.5 41.75 42 43.5 42.25 Weight 1361 1610 1915 2690 4255
Model Number LHMB2014 LHMB2016 LHMB2018 LHMB2020 LHMB2024 LHMB2030 20 HR Headroom 45.75 46 46.25 48 48.5 49.25 Weight 1210 1510 1885 2225 3155 5040
Model Number LHMB2514 LHMB2516 LHMB2518 LHMB2520 LHMB2524 LHMB2530 25 HR Headroom 54.75 55 56.75 59.75 60 60.75 Weight 1540 1900 2230 2725 3685 5530
Model Number LHMB3010 LHMB3012 LHMB3014 LHMB3016 LHMB3018 LHMB3020 LHMB3024 LHMB3030 30 HR Headroom 54.5 56.5 56.5 56.75 62.25 62.5 63 68.75 Weight 1150 1395 1695 2050 2380 2850 4040 5725
Model Number LHMB408 LHMB4010 LHMB4012 LHMB4014 LHMB4016 LHMB4018 LHMB4020 LHMB4024 LHMB4030 40 HR Headroom 65.75 66.25 66.25 66.25 68.75 69.25 72 75.25 78.5
Weight 1200 1550 1840 2220 2400 3100 3680 4920 6810
SPECIFICATIONS
A=7/8B=3C=5
A = 7 / 8
B=3C=5
A=1-1/4
B=3C=5
A=2B=4C=7
A=2B=4C=7
A=2B=4C=7
A=2-1/2
B=5C=9
A=2 -1/2
B=5C=9
A=3B=6C=12
A=3 -1/2
B=7C=16
A=3 -1/2
B=7C=16
T=3/4O=7/8
T=3/4
O=7/8
T=1O=1
T=1-1/4O=1-15/16
T=1-1/4O=1-1/2
T=1-1/4O=1-9/16
T=1-1/2O=2-1/16
T=1-1/2O=2-1/4
T=1-3/4O=2-1/4
T=2O=2-1/4
T=2-1/2O=3
Shown with optional Built-In Stand and different hole placement.
OPTION B
Extra Shacklesand Swivel Hooks
Allows for multiple pick pointsor eliminates the need to movehardware for different size loads.
OPTION C
Built In StandKeeps beam uprightfor easy crane hookattachment (pictured above).
OPTION A
Extra Holes or DifferentPlacement of Holes
Allows multiple hook positioningbeyond standard 3 spreads.Specify numberand spread(s) required.
Other sizes available, consult factory.
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 & 7
SEEPAGES6 &7
SEE
PAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 & 7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 & 7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 & 7
SEEPAGES6 & 7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 & 7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 & 7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
SEEPAGES6 &7
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 13/67
HCLBHIGH-CAPACITY LIFTING BEAM
PRODUCT FEATURESHeavy duty “I” beam construction.
Built in beam stands for easy storage.
Pin bail to allow for quick attachmentof large crane hook.
Beams have three spreads for flexibility.
Lifting shackles are standard.
Complies with ASME standards.
CM CADY BELOW THE HOOK LIFTERS
SPECIFICATIONS
Dimensions (inches)
Capacity Model Spread Overall HR Overall Weight (tons) Number (ft.) Width Headroom Height A B C SW (lbs.)
HCLB5010 10 138 60.31 70.31 2881 50 HCLB5015 15 198 60.73 70.73 5 8 19.5 40 3841 HCLB5020 20 258 61.25 71.25 5161
HCLB6510 10 138 61.38 70.51 3059 65 HCLB6515 15 198 64.5 73.63 5 8 19.5 40 4117 HCLB6520 20 258 67.8 76.93 5801
HCLB8010 10 138 67.1 76.98 3663 80 HCLB8015 15 198 70.21 80.09 5.5 8 21.25 44 4808 HCLB8020 20 258 73.56 83.44 6674
Other sizes available, consult factory.
OVERALL LENGTH
SPREAD
SPREAD - 1
SPREAD - 2
OVERALL
HEIGHT
A
B
C
HR
SW
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 14/67
HDBB HEAVY DUTY TWINBASKET SLING LIFTING BEAM
L I F T I NG
PRODUCT FEATURES Designed to be used with slings in a basket hitch.
Specially designed hooks with hook latchesminimize potential sling damage.
Two sets of fixed hooks are standardin all lengths over 4 feet.
The inner set of hooks (S2)are 1/2 the overall spread.
Extra spreads available upon request.
Complies with ASME standards.
CM CADY BELOW THE HOOK LIFTERS10 Products highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
C
B A
S2
HR
T
O
SPREAD
Consult factory for lifting sheets orpackages of glass. Special Web Slings
are available for all applications.
Model Number Spread (feet)
Capacity HR Headroom (in.) Other
(tons) Weight (lbs.) 3 4 6 8 10 12 14 16 18 20 24 30 Dimensions (in.)
Model Number HDBB10003 HDBB10004 HDBB10006 HDBB10008 HDBB100010 HDBB100012 HDBB100014 HDBB100016 HDBB100018 HDBB100020 HDBB100024 HDBB100030
1/2 HR Headroom 8-1/2 8-1/2 8-1/2 8-1/2 9-1/2 9-1/2 10-1/2 10-1/2 11-1/2 11-1/2 12-1/2 13-1/2
Weight 50 65 110 150 200 220 298 331 424 463 627 855
Model Number HDBB13 HDBB14 HDBB16 HDBB18 HDBB110 HDBB112 HDBB114 HDBB116 HDBB118 HDBB120 HDBB124 HDBB130
1 HR Headroom 8-1/2 8-1/2 9-1/2 10-1/2 10-1/2 11-1/2 11-1/2 12-1/2 13-1/2 13-1/2 15-1/2 15-1/2
Weight 50 65 145 210 230 290 338 390 539 588 907 1150
Model Number HDBB23 HDBB24 HDBB26 HDBB28 HDBB210 HDBB212 HDBB214 HDBB216 HDBB218 HDBB220 HDBB224 HDBB230
2 HR Headroom 9-1/2 10-1/2 10-1/2 11-1/2 12-1/2 13-1/2 13-1/2 14-1/2 15-1/2 15-1/2 17-1/2 20-1/2
Weight 70 90 160 225 300 375 447 515 725 815 1221 2272
Model Number HDBB53 HDBB54 HDBB56 HDBB58 HDBB510 HDBB512 HDBB514 HDBB516 HDBB518 HDBB520 HDBB524 HDBB530
5 HR Headroom 13-1/2 14-1/2 15-1/2 16-1/2 16-1/2 16-1/2 19 19-1/2 22-1/2 22-1/2 22-1/2 25-1/2
Weight 90 160 275 350 450 500 854 940 1398 1650 2144 2330
Model Number HDBB753 HDBB754 HDBB756 HDBB758 HDBB7510 HDBB7512 HDBB7514 HDBB7516 HDBB7518 HDBB7520 HDBB7524 HDBB7530
7-1/2 HR Headroom 14-1/2 15-1/2 16-1/2 17-1/2 17-1/2 19-1/2 22-1/2 22-1/2 22-1/2 22-1/2 25-1/2 25-1/2
Weight 155 180 330 410 500 700 1162 1300 1468 1606 2354 2877
Model Number HDBB103 HDBB104 HDBB106 HDBB108 HDBB1010 HDBB1012 HDBB1014 HDBB1016 HDBB1018 HDBB1020 HDBB1024 HDBB1030
10 HR Headroom 15-1/2 16-1/2 17-1/2 19-1/2 22-1/2 19-1/2 22-1/2 22-1/2 25-1/2 25-1/2 25-1/2 25-1/2
Weight 150 200 320 500 850 1000 1147 1299 1741 1943 2335 2962
Model Number HDBB153 HDBB154 HDBB156 HDBB158 HDBB1510 HDBB1512 HDBB1514 HDBB1516 HDBB1518 HDBB1520 HDBB1524 HDBB1530
15 HR Headroom 18-1/2 19-1/2 21-1/2 21-1/2 24-1/2 27-1/2 27-1/2 27-1/2 27-1/2 27-1/2 27-1/2 30
Weight 397 471 970 1240 1256 1980 2065 2100 2391 2584 4045 4100
Model Number HDBB203 HDBB204 HDBB206 HDBB208 HDBB2010 HDBB2012 HDBB2014 HDBB2016 HDBB2018 HDBB2020 HDBB2024 HDBB2030
20 HR Headroom 19-1/2 21-1/2 21-1/2 24-1/2 24-1/2 24-1/2 27-1/2 27-1/2 27-1/2 27-1/2 31 31
Weight 253 328 910 1000 1150 1740 1935 2210 2480 2755 3500 4500
SPECIFICATIONS
A=7/8 T=3/4
B=3 O=1-1/16
C=5
A=7/8 T=3/4
B=3 O=1-1/8
C=5
A=7/8 T=3/4
B=3 O=1-1/8
C=5
A=2 T=1
B=4 T=1-1/4*
C=7 O=1-1/8
A=2 T=1-1/4
B=4 O=1-3/4
C=7
A=2 T=1-1/4
B=4 O=1-3/4
C=7
A=2-1/2 T=1-1/2
B=5 O=4
C=9
A=2-1/2 T=1-1/2
B=5 O=4
C=8
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 15/67
THLB TWIN HOIST LIFTING BEAM
CM CADY BELOW THE HOOK LIFTERSProducts highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
OPTION CCenter bail and extra pair of
hooks for maximum versatility.
OPTION A Off-set hook for hoistsof different capacities.
OPTION BMultiple load hooks,
some outside the bail span.
SPREAD
TA B
C
HRO
See RLB (page 17) for Twin Hoist Rotating Beam
PRODUCT FEATURES Use two or more hoists to increase lifting stability.
Swivel hook with hook latch.
Several options are available for added versatility.
Complies with ASME standards.
Model Number Spread (feet)
Capacity HR Headroom (in.) Other
(tons) Weight (lbs.) 6 8 10 12 14 16 18 20 24 Dimensions (in.)
Model Number THLB26 THLB28 THLB210 THLB212 THLB214 THLB216 THLB218 THLB220 THLB224 2 HR Headroom 16-3/4 16-3/4 17-3/4 17-3/4 18-3/4 18-3/4 18-3/4 18-3/4 19-3/4 Weight 125 160 240 280 360 400 530 660 790
Model Number THLB46 THLB48 THLB410 THLB412 THLB414 THLB416 THLB418 THLB420 THLB424 4 HR Headroom 20 21 22 23 23 25 25 25 26 Weight 160 240 310 410 500 725 805 890 1695
Model Number THLB66 THLB68 THLB610 THLB612 THLB614 THLB616 THLB618 THLB620 THLB624 6 HR Headroom 27-1/2 28-1/2 28-1/2 30-1/2 30-1/2 30-1/2 30-1/2 30-1/2 31-1/2 Weight 220 300 380 550 640 780 1310 1450 1735
Model Number THLB106 THLB108 THLB1010 THLB1012 THLB1014 THLB1016 THLB1018 THLB1020 THLB1024 10 HR Headroom 29 29 32 32 32 32 32 32 33
Weight 340 420 800 920 1100 1220 1705 1840 2230
Model Number THLB158 THLB1510 THLB1512 THLB1514 THLB1516 THLB1518 THLB152015 HR Headroom 38-1/4 38-1/4 38-1/4 41-1/4 41-1/2 41-1/2 41-1/2
Weight 740 865 1050 1930 2158 2290 2500
Model Number THLB208 THLB2010 THLB2012 THLB2014 THLB2016 THLB201820 HR Headroom 35-1/2 38-1/2 38-1/2 38-1/2 38-1/2 38-1/2
Weight 830 1130 1266 1926 2196 2430
Model Number THLB308 THLB3010 THLB301230 HR Headroom 54 54 54
Weight 1120 1325 1610
Model Number THLB408 THLB4010 THLB401240 HR Headroom 58-1/2 58-1/2 58-1/2
Weight 1165 1470 1700
SPECIFICATIONS
A=1-1/2 T=5/8B=3 O=1-1/8C=5
A=1-1/2 T=5/8B=3 O=1-1/2C=5
A-1-1/2 T=3/4B=3 O=2-1/16C=5
A=2 T=1B=4 O=2-1/4
C=7
A=2 T=1-1/4B=4 O=2-1/4C=7
A=2 T=1-1/4B=4 O=3C=7
A=2-1/2 T=1-1/2B=5 O=3-3/4C=9
A=2-1/2 T=1-1/2B=5 O=4-1/4C=9
OPTION DRoller bearing hook shown
(standard on 30 and 40 ton models)as shown in photo.
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 16/67
ABB ADJUSTABLE BAILLIFTING BEAM
L I F T I NG
CM CADY BELOW THE HOOK LIFTERS12
OPTION A*Extra Holes
Allows for multiple hookpositioning. Specify number
and spread(s) required.
*Could increase headroom.
C
O
B A
HR
T
E E
DTYP.
SPREAD
SPECIFICATIONS
OPTION BFaspins
For ease of positioninghooks with quick release.
Specify number offaspins required.
OPTION CExtra Hooks
Allows for multiple pickpoints. Specify number
of hooks required.
OPTION DLower Headroom
Lifting pin located betweenstructural channel. (Hoisthook information must
be supplied.)
PRODUCT FEATURESHandles off center loads by
adjusting the bail before a lift.
Adjustable spread options available.
Swivel hooks with hook latches standard.
Wide range of sizes and capacities available.
Complies with ASME standards.
Rated Model Number Spread (feet)
Capacity HR Headroom (in.) Other
(tons) Weight (lbs.) 3 4 6 8 10 12 14 16 18 20 Dimensions (in.)
Model Number ABB10003 ABB10004 ABB10006 ABB10008 ABB100010 ABB100012 ABB100014 ABB100016 ABB100018 ABB1000201/2 HR Headroom 13-1/2 13-1/2 13-1/2 12-5/8 13-1/2 13-1/2 13-1/2 14-1/2 14-1/2 14-1/2
Weight 47 56 75 82 95 147 168 255 278 304
Model Number ABB13 ABB14 ABB16 ABB18 ABB110 ABB112 ABB114 ABB116 ABB118 ABB1201 HR Headroom 13-1/2 13-5/8 13-5/8 14-5/8 14-5/8 14-5/8 15-5/8 15-5/8 16-1/2 16-1/2 Weight 47 56 83 126 170 198 268 298 409 449
Model Number ABB23 ABB24 ABB26 ABB28 ABB210 ABB212 ABB214 ABB216 ABB218 ABB2202 HR Headroom 14 15-1/8 15-1/8 16-1/8 18-1/2 17-1/8 18-1/4 18-1/4 19-1/2 19-1/2 Weight 48 89 117 170 240 278 369 416 547 605
Model Number ABB53 ABB54 ABB56 ABB58 ABB510 ABB512 ABB514 ABB516 ABB518 ABB5205 HR Headroom 21-1/2 21-1/2 21-1/2 22-1/2 23-1/2 27 27 28 29 30-3/8 Weight 140 160 215 304 430 633 664 746 1321 1525
Model Number ABB103 ABB104 ABB106 ABB108 ABB1010 ABB1012 ABB1014 ABB1016 ABB1018 ABB102010 HR Headroom 25-3/4 25-3/4 28-3/4 28-3/4 31-3/4 31-3/4 31-3/4 31-3/4 34-3/4 34-3/4
Weight 210 211 432 522 759 993 1128 1257 1738 1908
Model Number ABB153 ABB154 ABB156 ABB158 ABB1510 ABB1512 ABB1514 ABB151615 HR Headroom 28-1/4 30-1/2 33-1/2 33-1/2 33-1/2 37 37 37
Weight 252 330 502 542 882 1455 1630 1800
Model Number ABB203 ABB204 ABB206 ABB208 ABB2010 ABB201220 HR Headroom 31 34 37 34 37 37
Weight 315 399 735 720 1276 1251
Other D=3 D=3 D=3 D=4 D=4 D=4 D=6 D=6 D=6 D=6 Dimensions (in.) E=6 E=9 E=12 E=16 E=20 E=24 E=30 E=36 E=42 E=48
A=1-1/2 T=5/8B=3 O=1C=5
A=1-1/2 T=5/8B=3 O=1C=5
A-1-1/2 T=3/4B=3 O=1C=5
A=2 T=1B=4 O=1C=7 O=1-1/2*
A=2 T=1-1/4B=4 O=1-3/4C=7
A=2-1/2 T=1-1/2B=5 O=2C=9
A=2-1/2 T=1-1/2B=5 O=2C=9
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 17/67
LLLB LOAD LEVELINGLIFTING BEAM
CM CADY BELOW THE HOOK LIFTERS
OPTION A
Extra Holes Allows for multiple hook
positioning. Specify numberand spread(s) required.
*Could increase headroom.
Bail Adjustment (in.) D=8 D=12 D=16 D=20 D=24 D=28 D=32 D=36 D=40 D=48
SPECIFICATIONS (chain wheel model only)
OPTION B
FaspinsFor ease of positioning hooks
with quick release. Specifynumber of faspins required.
OPTION C
Extra hooks Allows for multiplepick points. Specify
number of hooks required.
PRODUCT FEATURESHandles off center loads
by adjusting the bail before a lift.
Infinite adjustmentof bail within range.
Swivel hooks with hooklatches standard.
Wide range of sizesand capacities available.
Complies with ASME standards.
Adjust manual chain wheel before lift.
Rated Model Number Spread (feet)Capacity HR Headroom (in.) Other
(tons) Weight (lbs.) 4 6 8 10 12 14 16 18 20 24 Dimensions (in.)
Model Number LLLB24 LLLB26 LLLB28 LLLB210 LLLB212 LLLB214 LLLB216 LLLB218 LLLB220 LLLB224 2 HR Headroom 15-1/8 15-1/8 16-1/8 17-1/8 17-1/8 18-1/8 18-1/8 19-1/8 19-1/8 20-1/8 Weight 135 185 260 329 377 481 538 680 750 1265
Model Number LLLB54 LLLB56 LLLB58 LLLB510 LLLB512 LLLB514 LLLB516 LLLB518 LLLB520 LLLB524 5 HR Headroom 21-1/2 21-1/2 23-1/2 23-1/2 25-1/2 25-1/2 25-1/2 28-1/2 28-1/2 28-1/2 Weight 170 270 382 475 681 777 950 1455 1603 2345
Model Number LLLB104 LLLB106 LLLB108 LLLB1010 LLLB1012 LLLB1014 LLLB1016 LLLB1018 LLLB1020 LLLB1024 10 HR Headroom 25-3/4 28-3/4 28-3/4 31-3/4 31-3/4 31-3/4 31-3/4 34-3/4 34-3/4 34-3/4 Weight 257 440 500 940 1094 1243 1388 1875 2056 2560
Model Number LLLB154 LLLB156 LLLB158 LLLB1510 LLLB1512 LLLB1514 LLLB151615 HR Headroom 30-1/2 33-1/2 33-1/2 33-1/2 36-1/2 36-1/2 36-1/2
Weight 376 565 622 972 1319 1418 1513
Model Number LLLB204 LLLB206 LLLB208 LLLB2010 LLLB201220 HR Headroom 34 37 37 37 37
Weight 445 798 900 1050 1353
A=1-1/2 T=5/8B=3 O=1C=5
A=2 T=1B=4 O=1C=7
A-2 T=1-1/4B=4 O=1-3/4C=7
A=2-1/2 T=1-1/2B=5 O=1-3/4C=9
A=2-1/2 T=1-1/2B=5 O=2C=9
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 18/67
MOTORIZED LOADLEVELING BEAM
L I F T I NG
CM CADY BELOW THE HOOK LIFTERS14
PRODUCT FEATURESMotorized beam adjusts to
the center of gravity during lift.
Swivel hooks with hooklatches are standard.
Custom sizes are available.
Push button pendent controlwith radio control option.
Standard bail adjustment6" each side of center, withoptional 12" adjustment eachside of center available.
Complies with ASME standards.
Leveling uneven loads during thelift saves rigging time and promotesa safer work environment.
SPECIAL 4-POINT MOTORIZED BEAM WITH LOAD GUIDES.
Ideal for Bundles,Odd or Irregular Shaped Loads,Weldments, Paper Roll Handling& Sheet Handling.
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 19/67
BCBBULK CONTAINER LIFTING BEAM
CM CADY BELOW THE HOOK LIFTERSProducts highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
PRODUCT FEATURESConstructed of tubing for smooth
surface with no sharp edges.
Low headroom design.
Easily attach to load with open lifting lugs.
Lug spacing will hold up to a 3" wide loop.
Oversized lifting eye to accepta wide range of hooks.
Complies with ASME standards.
AFPB STANDARD ADJUSTABLE
FOUR POINT LIFTING BEAMPRODUCT FEATURESLow headroom design.
Swivel hooks with latches standard.
Adjustable spreads on 1' increments.
Faspins for easy crossarm adjustment.
Complies with ASME standards.
Model Capacity Span Weight Number (lbs.) (in.) (lbs.)
BCB136 2200 36 150
BCB148 2200 48 185
BCB236 4400 36 155
BCB248 4400 48 190
Other sizes available, please consult factory.
SPECIFICATIONS
Note: All dimensions shown in inches.
SPECIFICATIONS
TYP
6.00 TYP
C
A
B
HR
MAIN BEAM MIN.
MAIN BEAM MAX.
O
T
CROSSARMMIN.
CROSSARMMAX.
6.00 TY Dimensions (inches)
Model Capacity Main Beam Crossarms Bail Weight Number (tons) Min./Max. Min./Max. A B C T O (lbs.)
AFPB384 3 36/84 24/60 1.25 3 5 1 0.97 375
AFPB5120 5 48/120 36/96 2 4 7 1.25 1.06 760
AFPB10144 10 72/144 36/96 2 4 7 1.25 1.41 1530
Custom sizes and capacities available. Please fill out the Lifting Beam Application Evaluation.
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 20/67
FPB FOUR POINTLIFTING BEAM
TPB THREE POINTLIFTING BEAM
L I F T I NG
This low headroom liftingbeam handles large loads
using multiple pick points.
Each unit is custom designed
for your specific application.
Complies with ASME standards.
CM CADY BELOW THE HOOK LIFTERS16
OPTION A
Multiple BailsUse 2 or 4 hoists to
increase lifting stability.
OPTION B
Adjustable BailIs used when load-leveling capability
is required along length of load.
OPTION C
Adjustable SpreadUse when adjustability in
length and width is required.
OPTION A
Multiple BailsUse 2 hoists to increase
lifting stability.
OPTION B
Adjustable BailIs used when load-leveling
capability is required along lengthof load.
OPTION C
Adjustable SpreadUse when adjustability in length
and width is required.
This low headroom lifting beam handles large
loads using multiple pick points. Each unit is
custom designed for your specific application.
Complies with ASME standards.
Shown with Option B
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 21/67
RLB TWIN HOISTROTATING LIFTING BEAM
A specially designed liftingand rotating beam using two cranes
or two hoists to horizontally rotate
a load. A position locking pin holds the
load rotation at a designated position.
Available with motorized rotation.
CM CADY BELOW THE HOOK LIFTERS
Positioning Locking Pin
Heavy Duty
Rotation Bearing
Swivel Hooks
w/Latches
Twin Bails
OPTION A
Twin HooksUsed in conjunction with
basket hitch slings.
OPTION B
J HooksGenerally required to lift paper
rolls or similar application.Use Paper Roll Lifters
Application Evaluation on page 57.
OPTION C
Motorized Rotation Allows remote positioning of a load.
OPTION D
Lower Head Room BailsUtilized when headroom
must be held to a minimum.Crane hook data must be
supplied, see page 56.
PRODUCT FEATURESWide range of sizes
and capacities available.
Maximum 20 feet(upper and lower) beam length.
Complies with ASME standards.
CCB CHLORINE CYLINDERLIFTING BEAM
Designed to efficiently handle
standard chlorine gas cylinders.
Standard size determined
by the Chlorine Institute is
80-3/4" to 82-1/4" in length.Special low headroom
modification is available.
2 TON CAP.
3 7/85
3/4
HR
80-3/4 TO 82-1/4
SPREAD
Note: All dimensions shown in inches.
HR
Model Capacity Headroom Weight Number (tons) (in.) (lbs.)
CCB2165 2 16-1/2 - 15-1/2 105
SPECIFICATIONS
Products highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 22/67
CM CADY BELOW THE HOOK LIFTERS18
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 23/67
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 24/67
FSBFIXED SPREADER BEAM
S P RE A DE R
PRODUCT FEATURESIdeal where headroom is not limited.
Adds stability to lift.
Available with standard chainor wire rope rigging.
Available with Adjust-A-Leg®
riggingfor off center load adjustment(minimum lifting capacity will beapproximately 10-15% of beam rating).
Wide range of additional sizesand capacities available.
Complies with ASME standards.
Specify Top Rigging
CM CADY BELOW THE HOOK LIFTERS20 Products highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
NOTE: Weight = Beam and hooks only - (no top rigging).
OPTION WWire rope top rigging from
beam to crane hook.
Model Number Spread (feet)Capacity HR Headroom (in.) Other
(tons) Weight (lbs.) 4 6 8 10 12 16 20 24 Dimensions (in.)
Model Number FSB24 FSB26 FSB28 FSB210 FSB212 FSB216 FSB220 FSB224 2 HR Headroom 34 46 58 70 82 106 132 156 Weight 45 60 82 95 115 225 408 445
Model Number FSB54 FSB56 FSB58 FSB510 FSB512 FSB516 FSB520 FSB524 5 HR Headroom 37 49 61 73 83 110 134 158 Weight 62 78 100 117 168 305 435 661
Model Number FSB104 FSB106 FSB108 FSB1010 FSB1012 FSB1016 FSB1020 FSB1024 10 HR Headroom 41 53 64 77 86 113 138 163 Weight 100 122 156 180 240 380 532 915
Model Number FSB154 FSB156 FSB158 FSB1510 FSB1512 FSB1516 FSB1520 FSB1524 15 HR Headroom 43 55 65 80 92 116 140 167 Weight 126 155 185 242 270 420 665 953
Model Number FSB204 FSB206 FSB208 FSB2010 FSB2012 FSB2016 FSB2020 FSB2024 20 HR Headroom 46 58 69 82 94 118 140 170 Weight 170 200 233 315 350 540 775 1341
Model Number FSB306 FSB308 FSB3010 FSB3012 FSB3016 FSB3020 30 HR Headroom 60 70 83 95 120 145
Weight 285 402 440 530 888 1390
Model Number FSB406 FSB408 FSB4010 FSB4012 FSB4016 40 HR Headroom 65 77 89 102 127
Weight 563 695 781 1058 1364
OPTION CChain top rigging frombeam to crane hook.
OPTION A Adjust-A-Leg® sling top rigging for off-center load
adjustment (not included in QuickShip Program).
SHOWN WITH OPTION C
SPECIFICATIONS
A=1/2 F=4-1/4B=2-1/2 O=31/32C=5
A=1 F=6B=3-1/2 O=1-1/16C=7
A=1-1/4 F=8-1/8B=4-3/8 O=1-1/2C=8-3/4
A=1-1/2 F=9-1/4B=5-1/4 O=1-3/4C=10-1/2
A=1-3/4 F=9-3/4B=6 O=2C=12
A=1-3/4 F=9-3/4B=6 O=2C=12
A=2 F=13B=7 O=2-3/4C=14
TOP RIGGING OPTIONS
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 25/67
ADJSB ADJUSTABLE SPREADER BEAM
PRODUCT FEATURES Ideal where headroom is not limited.
Adds stability to lift.
Telescopic spread standard.
Available with standard chain or wire rope rigging.
Available with Adjust-A-Leg® rigging for off centerload adjustment (minimum lifting capacity will beapproximately 10-15% of beam rating).
Wide range of additional sizesand capacities available.
Complies with ASME standards.
Specify Top Rigging
CM CADY BELOW THE HOOK LIFTERSProducts highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
HR
C
B
A
45°
SPREAD
F
O
SHOWN WITH OPTION C
HR Headroom Weight A B C F - Hook O - Hook Chain Spread Min./Max. Beam & Oblong Oblong Oblong To Beam Opening Rigging
Capacity Model (ft.) w/chain Hooks Dia. Width Height Bottom w/latch Weight (tons) Number Min./Max. (in.) (lbs.) (in.) (in.) (in.) (in.) (in.) (lbs.)
ADJSB24 4 / 6 48/57 70 9
2 ADJSB26 6 / 10 72/88 85
1/2 2.36 3.94 5.5 0.97 13
ADJSB28 8 / 14 96/113 175 17
ADJSB212 12 / 20 132/166 245 23
ADJSB54 4 / 6 55/64 105 34
5 ADJSB56 6 / 10 79/95 160
1 3.94 7.09 8.4 1.41 47
ADJSB58 8 / 14 102/126 205 61 ADJSB512 12 / 20 138/172 670 82
ADJSB104 4 / 6 60/69 95 49
10 ADJSB106 6 / 10 74/111 175
1-1/4 5.51 10.63 10.6 1.78 69
ADJSB108 8 / 14 108/132 460 88 ADJSB1012 12 / 20 144/163 680 118
ADJSB154 4 / 6 64/72 165 78
15 ADJSB156 6 / 10 87/104 365
1-1/2 5.25 10.5 13.6 2.22 111
ADJSB158 8 / 14 111/135 478 145 ADJSB1512 12 / 20 147/180 700 194
SPECIFICATIONS
OPTION WWire rope top rigging from
beam to crane hook.
OPTION CChain top rigging frombeam to crane hook.
OPTION A Adjust-A-Leg® sling top rigging for off-center load
adjustment (not included in QuickShip Program).
TOP RIGGING OPTIONS
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 26/67
CM CADY BELOW THE HOOK LIFTERS22
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 27/67
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 28/67
SRB STANDARDROLL LIFTING BEAM
ROL L
PRODUCT FEATURESStandard beam sizes.
J-Hooks are custom cut per orderto fit your specific application.
Hooks can be fixed or pivot style.
J-Hooks are infinitely adjustable betweenminimum & maximum spread.
Complies with ASME standards.
SPECIAL ROLLLIFTING BEAM
PRODUCT FEATURES
Ideal where headroom is limited.
Easy lifting and positioning of rolls.
Adjustable spread options.
Twin hoist capability.
Motorized rotation available.
Complies with ASME standards.
CM CADY BELOW THE HOOK LIFTERS24
OPTION E
Spreader BeamOffers greater stability
when required headroomis not a consideration.
OPTION A
Adjustable SpreadsUsed when handling
rolls of varying widths.
OPTION B
Hook Linings
a. Bronze/Brass
b. Urethane
c. Brake Lining
(Min. Shaft Dia. = 6")
OPTION C
Twin BailsUsed when two hoistsare required to stabilizea lift, when load rotation
is not desirable.
OPTION D
Motorized Rotation Allows remote
positioning of a load.For additional info, seeModel RLB on page 17.
Used to lift rolls with plate style or bent bar J-Hooks. Hooks are
designed to support the core mandrel which is through the I.D.
of the roll. Fixed beam lengths can be used for single roll widths.
Maximum roll diameters will determine length of J-Hooks.
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 29/67
ROLL GRIPPING TONGS
CM CADY BELOW THE HOOK LIFTERS
N M PL T
Used to grip the O.D. of a roll. The diameter range can vary up
to 25%. A double leg design will provide additional roll stability;
however, single leg models are available for narrower rolls.
Recommend double leg for rolls wider than 48".
CAPACITIES
DOUBLE LEG: UP TO 4 TONS
SINGLE LEG: UP TO 2 1/2 TONS
PRODUCT FEATURES Automatic latching mechanism for single-person operation.Tong saddles with protective covering to prevent roll damageare available.
ROLL GRABSUsed for side lifting of rolls by gripping on the ends.
A wide range of roll lengths or widths can be accommodated.
Motorization is recommended when handling a wide range
of roll widths.
CAPACITIES UP TO 5 TONS
MOTORIZED ROLL LIFTERUsed to lift rolls by positioning lifting pins in the I.D.
of the roll. Arms move in and out to clear and lift roll.
This model will handle a variety of widths with minimal
aisle clearance requirements. Motorization is recommended;
however, chainwheel operation is available.
CAPACITIES UP TO 10 TONS
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 30/67
ROL L
CM CADY BELOW THE HOOK LIFTERS26
ROLL LIFTING C-HOOKSThe CM Cady Roll Lifting C-Hook is designed to handle
rolls by inserting a round arm into the roll I.D. This unit
is counter balanced to hang level when empty for ease
of insertion into the roll core. Guide handle is standard.
Lifter parking stand can be furnished if required.
CAPACITIES UP TO 5 TONS
ROLL POSITIONERSThe CM Cady Low Platform Roll Upender/Downender
allows rolls to be repositioned by 90° rotation. The low
platform is desirable in those applications where headroom
is restricted. Hydraulic controls are standard.
CAPACITIES UP TO 7 1/2 TONS
The Heavy Duty Roll Positioner
is available with a mechanical drive.
This model requires additional platform height.
CAPACITIES UP TO 30 TONS
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 31/67
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 32/67
NCCNARROW COIL C-HOOK
PRODUCT FEATURESHandles narrow coils with less coil edge damage.
More durable than web slings.
Lightweight for easier handling.
Built in guide handle for ease of coil positioning.
Available with optional curved coil saddle.
Inside radius on hooks avoid coil edge contact.
Complies with ASME standards.
CM CADY BELOW THE HOOK LIFTERS28
COI L L I F T E RS
Products highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
*Will not hang level when empty.
SPECIFICATIONS
Coil Lifting Arm PlateBail Dimensions
Model Capacity Width Length Depth HR Weight
Number (tons) Max. Throat L D Headroom A B C T (lbs.)
NCC10008 1/2 8 14-1/2 8 2-1/4 18-1/2 13/16 2 3-1/4 1/2 14 NCC100012 12 14-1/2 12 2-5/8 18-1/2 13/16 2 3-1/4 1/2 17
NCC18 1 8 17-1/2 8 2 21-1/2 13/16 2 3-1/4 1/2 15 NCC116 16 17-1/2 16 2-1/2 21-1/2 13/16 2 3-1/4 1/2 20
NCC28 2 8 19-1/2 8 2-1/8 24-9/16 1 2-9/16 4-1/16 3/4 22 NCC216 16 19-1/2 16 3 24-9/16 1 2-9/16 4-1/16 3/4 40
NCC3512 3-1/2
12 21-1/2 12 2-7/8 28-1/8 1-3/16 3-5/8 5-5/16 1 50 NCC3516 16 21-1/2 16 3-3/8 28-1/8 1-3/16 3-5/8 5-5/16 1 63
NCC516 5
16 25-1/2 16 3-1/2 32-13/16 1-1/2 4 5-13/16 1-1/4 94 NCC520 20 25-1/2 20 4 32-13/16 1-1/2 4 5-13/16 1-1/4 110
Dimensions (inches)
NOTE: E dimension equals one-half the dimension of L + 1/2".
LOAD CENTER OF GRAVITYMUST BE IN-LINE WITH THE
CENTER OF THE HOIST.
W A R N I N G
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 33/67
DCHDIXON COIL HOOK
PRODUCT FEATURESEasy horizontal to vertical upending of coils.
Pivoting wedge for easy tilting of stacked coils.
Wedge acts as retainer.
Efficient and easy to use.
Popular for use with small, lightweight coils.
For use where overhead clearance is limited.
Specially designed heat treated pivoting wedge.
Complies with ASME standards.
CM CADY BELOW THE HOOK LIFTERS ) ) IN-STOCK Products highlighted green ship in 3 to 5 days.
AC
B
MAX.
WIDTHRADIAL
T
D
W
Other sizes available, consult factory.
SPECIFICATIONS
Dimensions (inches)
Model Capacity Max. Max. Min. Weight
Number (tons) Width Radial I.D. A B C D T W (lbs.)
DCH1000613 1/2 6 13 9 13/16 2 3-5/16 6 1/2 3-1/2 20
DCH10001213 1/2 12 13 13 13/16 2 3-5/16 6 1/2 3-1/2 28
DCH1816 1 8 16 10 13/16 2 3-5/16 6 1/2 3-1/2 23
DCH21018 2 10 18 12-1/2 1 2-5/8 4 6-3/4 3/4 2 42
DCH351220 3-1/2 12 20 14-1/2 1-3/16 3-5/8 5-5/16 7-3/4 1 2-1/2 80
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 34/67
HDCHEAVY DUTY C-HOOK
CM CADY BELOW THE HOOK LIFTERS30
COI L L I F T E RS
Products highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
Other sizes available, consult factory.
PRODUCT FEATURES Designed for heavy duty applications.
High tensile alloy steel plate reducesphysical size and weight.
Counter balanced to hang level when empty.
Inside radius on hooks avoid coil edge contact.
Curved coil saddle is standard.
Guide handles for ease of hook positioning.
Handles a wide range of coil widths.
Available with optional paddingfor additional coil protection.
Complies with ASME standards.
Dimensions (inches)
Lifting Arm Bail Dimensions
Model Capacity Coil Width Length Depth Width HR Opening Thk. Weight Number (tons) Max. Min. Throat L D W Headroom A B C T (lbs.)
HDC536 36 24 24 30 5-5/16 4 37-3/8 1-1/2 4 7 1-1/4 420 HDC548 5 48 30 24 39 6-1/8 4 38 1-1/2 4 7 1-1/4 584 HDC560 60 36 24 48 6-9/16 4 38-1/2 1-1/2 4 7 1-1/4 680
HDC7536 36 24 24 30 5-5/8 4 37-1/2 1-1/2 4 7 1-1/2 615 HDC7548 7-1/2 48 30 24 39 6-5/16 4 38-1/4 1-1/2 4 7 1-1/2 774 HDC7560 60 36 24 48 6-5/16 4 39 1-1/2 4 7 1-1/2 942
HDC1048 48 30 24 39 7-1/4 4 41-1/4 2 5 9 1-3/4 928 HDC1060 10 60 36 24 48 7-1/2 4 41-3/8 2 5 9 1-3/4 1295
HDC1072 72 42 24 57 7-1/4 4 42-1/2 2 5 9 1-3/4 1616 HDC1548 48 30 30 39 7-1/4 4 47-7/8 2 5 9 1-3/4 1450 HDC1560 15 60 36 30 48 8 4 48 2 5 9 1-3/4 1824 HDC1572 72 42 30 57 8-3/4 4 48-3/4 2 5 9 1-3/4 2227
HDC2060 60 36 30 48 9-1/8 4 52-1/8 2-1/4 6 12 2 2175 HDC2072
20 72 42 30 57 10 4 52-5/16 2-1/4 6 12 2 2625
HDC2560 60 36 34 48 9 4 57-3/4 2-1/2 6 14 2-1/4 2820 HDC2572
25 72 42 34 57 9-3/4 4 58-1/2 2-1/2 6 14 2-1/4 3570
HDC3060 60 36 34 48 9-7/8 4 58-3/4 2-3/4 6 14 2-1/2 3180 HDC3072
30 72 42 34 57 10-5/8 4 59-3/8 2-3/4 6 14 2-1/2 3800
HDC4072 40 72 42 38 57 11 5 68 3-1/4 7 18 3 5350
HDC5084 50 84 48 40 64-1/2 13 6 71-7/8 3-3/4 7 18 3 7470
SPECIFICATIONS
NOTE: E dimension is one-half of maximum coil width.
CENTER OF THE HOIST ANDBAIL MUST BE IN-LINE WITH
THE LOAD’S CENTER OF GRAVITY.
W A R N I N G
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 35/67
CSCCLOSE STACKING C-HOOK
PRODUCT FEATURESRecessed counterweight allows for close
stacking of coils which maximizes floor space.
Handles a wide range of coil widths.
Designed for heavy duty application.
High tensile alloy steel plate reduces physical size and weight.
Counter balanced to hang level when empty.
Inside radius on hooks avoid coil edge contact.
Curved coil saddle is standard.
Guide handle for ease of hook positioning.
Available with optional padding for additional coil protection.
Complies with ASME standards.
CM CADY BELOW THE HOOK LIFTERSProducts highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
CENTER OF THE HOIST ANDBAIL MUST BE IN-LINE WITH
THE LOAD’S CENTER OF GRAVITY.
W A R N I N G
NOTE: E dimension is one-half of maximum coil width.
GUIDE
HANDLES
W
D
L
E
T A
C
B
HR
THROAT
*Counterweight extends beyond arm one-half of the counterweight width, in capacities 25 ton and greater.Other sizes available, consult factory.
Dimensions (inches)
Lifting Arm Bail Dimensions Model Capacity Coil Width Length Depth Width HR Opening Thk. Weight Number (tons)
Max. Min. Throat L D W Headroom
A B C T (lbs.)
CSC536 36 24 24 30 5-5/16 4 37-1/4 1-1/2 4 7 1-1/4 550 CSC548 5 48 30 24 39 6-1/8 4 38-1/16 1-1/2 4 7 1-1/4 707 CSC560 60 36 24 48 6-15/16 4 38-15/16 1-1/2 4 7 1-1/4 853
CSC7536 36 24 24 30 5-5/8 4 37-1/2 1-1/2 4 7 1-1/2 750 CSC7548 7-1/2 48 30 24 39 6-3/8 4 38-1/4 1-1/2 4 7 1-1/2 996 CSC7560 60 36 24 48 6-15/16 4 39 1-1/2 4 7 1-1/2 1161
CSC1048 48 30 24 39 7-3/16 4 41-1/4 2 5 9 1-3/4 1200 CSC1060 10 60 36 24 48 7-5/8 4 41-1/2 2 5 9 1-3/4 1645 CSC1072 72 42 24 57 7-1/4 4 41-1/8 2 5 9 1-3/4 2100
CSC1548 48 30 30 39 7-1/4 4 47-7/8 2 5 9 1-3/4 2054 CSC1560 15 60 36 30 48 8 4 48 2-1/4 5 9 1-3/4 2410 CSC1572 72 42 30 57 8-3/4 4 48-3/4 2 5 9 1-3/4 2814
CSC2060 60 36 30 48 9-1/8 4 52-1/8 2-1/4 6 12 2 2864 CSC2072
20 72 42 30 57 9-3/4 4 52-1/2 2-1/4 6 12 2 2951
CSC2560* 60 36 34 48 9 4 57-3/4 2-1/2 6 14 2-1/4 3077 CSC2572*
25 72 42 34 57 9-3/4 4 58-3/4 2-1/2 6 14 2-1/4 3570
CSC3060* 60 36 34 48 9-7/8 4 58-3/4 2-3/4 6 14 2-1/2 3480 CSC3072*
30 72 42 34 57 10-5/8 4 59-3/8 2-3/4 6 14 2-1/2 4260
CSC4072* 40 72 42 38 57 11 5 68 3-1/4 7 18 3 6100
SPECIFICATIONS
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 36/67
E
L
D
THROAT
HR
T
NOTE: E dimension is one half of “L” dimension.COIL WIDTHS
SCCSLIT COIL C-HOOK
CM CADY BELOW THE HOOK LIFTERS32
COI L L I F T E RS
Products highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
Dimensions (inches)
Coil Lifting Arm Bail Dimensions
Model Capacity Width Length Depth Width HR Opening Thk. Weight Number (tons) Max. Throat L D W Headroom
A B C
T (lbs.)
SCC536 36 24 36 5-5/16 4 37-1/4 1-1/2 4 7 1-1/4 450 SCC548 5 48 24 48 6-1/8 4 38 1-1/2 4 7 1-1/4 555 SCC560 60 24 60 6-9/16 4 38-9/16 1-1/2 4 7 1-1/4 649
SCC7536 36 24 36 5-5/8 4 37-5/8 1-1/2 4 7 1-1/2 496 SCC7548 7-1/2 48 24 48 6-5/16 4 38-5/16 1-1/2 4 7 1-1/2 731 SCC7560 60 24 60 7-1/8 4 38-7/8 1-1/2 4 7 1-1/2 898
SCC1048 48 24 48 7-3/16 4 41-1/8 2 5 9 1-3/4 932 SCC1060 10 60 24 60 7-5/16 4 41-1/8 2 5 9 1-3/4 1281 SCC1072 72 24 72 7-1/4 4 41-1/8 2 5 9 1-3/4 1570
SCC1548 48 30 48 7-1/4 4 47-7/8 2 5 9 1-3/4 1510 SCC1560 15 60 30 60 8 4 48 2 5 9 1-3/4 1789 SCC1572 72 30 72 8-7/8 4 48-3/4 2 5 9 1-3/4 2120
SCC2060 20
60 30 60 9-1/8 4 52-1/8 2-3/4 6 12 2 2125 SCC2072 72 30 72 9-15/16 4 52-15/16 2-3/4 6 12 2 2485
SCC2560 25
60 34 60 9-1/8 4 57-3/4 3-1/4 6 14 2-1/2 2840 SCC2572 72 34 72 9-3/4 4 58-1/2 3-3/4 6 14 2-1/2 3350
Other sizes available, consult factory.
SPECIFICATIONS
PRODUCT FEATURES Designed for heavy duty applications.
Handles multiple slit coils which maximizeshandling efficiency.
Recessed counterweight minimizes interferencewith equipment or other obstacles.
High tensile alloy steel plate reducesphysical size and weight.
Counter balanced to hang level when empty.
Inside radius on hooks avoid coil edge contact.
Curved coil saddle is standard.
Guide handles for ease of hook positioning.
Available with optional paddingfor additional coil protection.
Complies with ASME standards.
CENTER OF THE HOIST ANDBAIL MUST BE IN-LINE WITH
THE LOAD’S CENTER OF GRAVITY.
W A R N I N G
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 37/67
VCL VERTICAL COIL LIFTER
CM CADY BELOW THE HOOK LIFTERSProducts highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
Spacer Blocks Installed
for 16-18" coil I.D.'s.See InstructionManual for details.
ECL EXTENDED WIDTH VERTICAL COIL LIFTERPRODUCT FEATURESHandles any size coil I.D. from 16" to 24".
Lifter legs automatically adjustto coil I.D. being lifted.
Has higher capacity rangethan standard lifter.
Unique design minimizes dunnagerequired between coils.
Complies with ASME standards.
Other sizes available, consult factory.
Dimensions (inches)
Coil HR
Model Capacity Coil I.D. Width Headroom Bail Dimensions Foot Dimensions Weight. Number (tons) Min. Max. W Open Closed A B C T F D J (lbs.)
ECL100024 1/2 16 24 20 36 30-7/8 1-1/4 3 5 5/8 5 1/2 14-1/2 90
ECL2524 2-1/2 16 24 24 44 37-1/2 1-1/2 3 5 3/4 5 3/4 15-1/2 125
ECL524 5 16 24 30 47 40-3/8 2 4 7 1 6 1 15-1/2 170
ECL7524 7-1/2 16 24 30 47 40-3/8 2 4 8 1 6 1 15-1/2 170
SPECIFICATIONS
Dimensions (inches)
Coil Model Capacity Coil I.D. Width HR Bail Dimensions Foot Dimensions Weight
Number (tons) Min. Max. W Headroom A B C T F D J (lbs.)
VCL100020 1/2 16 20 20 36 1-1/4 3 5 5/8 4 3/4 13 110
VCL1520 1-1/2 16 20 24 36 1-1/2 3 5 5/8 4 3/4 13 125
VCL320 3 16 20 24 40 1-1/2 3 5 3/4 5 3/4 13-1/2 180
VCL520 5 16 20 30 49 2 4 7 1 6 3/4 14-1/4 195
Other sizes available, consult factory.
SPECIFICATIONS
PRODUCT FEATURES
Efficient handling of verticallystacked coils.
Leg positioning handleis easy to operate and hasa positive locking feature.
Handles any size coil I.D.from 16" to 20".
Complies with ASME standards.
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 38/67
CM CADY BELOW THE HOOK LIFTERS34
COI L L I F T E RS
HCL VERTICAL COIL LIFTERWITH HAND WHEEL
PRODUCT FEATURES
Handles any size coil I.D. from 16" to 24".
Efficient handling of vertically stacked coils.
Available with chain wheel drive.
Complies with ASME standards.
Dimensions (inches)
CoilModel Capacity Coil I.D. Width HR Weight
Number (tons) Min. Max. W Headroom A B C T F D J (lbs.)
HCL2524 2-1/2 16 24 20 36 1-1/2 3 5 3/4 5 3/4 15-1/2 250
HCL524 5 16 24 24 41 2 4 7 1 6 1 15-1/2 350
HCL7524 7-1/2 16 24 24 42 2 4 7 1 6 1 15-1/2 425
HCL1024 10 16 24 30 50 2-1/2 5 9 1-1/4 6 1-1/2 15-1/2 500
Other sizes available, consult factory.
SPECIFICATIONS
DCOIL I.D.
F
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 39/67
CM CADY BELOW THE HOOK LIFTERS
ROTATING BAILCOIL LIFTER
PRODUCT FEATURESMotorized leg drive maximizes the efficient handling of coils.
Leg drive speed: 2.8" per second.
Narrow aisle stacking maximizes coil storage floor space.
Curved lifting pads for coil protection.
High impact plastic toe rollers prevent lifter foot contact.
Anti-clamp limit switch protects coilduring closing of lifter.
Heavy duty torque limiting drive protectionduring maximum open/closed conditions.
Lockout limit switch prevents inadvertentleg opening during lift.
Alloy steel pin bail.
Easily replaceable slide wear guides.
Design allows for easy maintenanceaccess to drive components.
Designed to operate on AC power supply.
Motorized 350° rotation at approximately 2 RPM.
Complies with ASME standards.
FIXED BAILCOIL LIFTER
PRODUCT FEATURESMotorized leg drive maximizes the efficient handling of coils.
Leg drive speed: 2.8" per second.
Narrow aisle stacking maximizes coil storage floor space.
Curved lifting pads for coil protection.
High impact plastic toe rollers prevent lifter foot contact.
Anti-clamp limit switch protects coil during closing of lifter.
Heavy duty torque limiting drive protectionduring maximum open/closed conditions.
Lockout limit switch prevents inadvertentleg opening during lift.
Alloy steel pin bail.
Easily replaceable slide wear guides.
Design allows for easy maintenanceaccess to drive components.
Designed to operate on AC power supply.
Field upgradeable to rotating style.
Complies with ASME standards.
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 40/67
CM CADY BELOW THE HOOK LIFTERS36
COI L L I F T E RS
CM CADY BELOW THE HOOK LIFTERS
ROTATING BAILFEATURES & OPTIONS
STANDARD ALLOY STEELLIFTING PINKeeps headroomto a minimum.
STANDARDENCLOSED DRIVE
Protects drive from impactyet still provides easyaccess for maintenance.
OPTIONALMOTORIZED BAIL ROTATION Allows for independent and precisepositioning of the load or the lifter.
OPTIONALBUILT IN LOAD SCALE
With digital readouts for precise coil weight.
OPTIONALURETHANE PADDINGUrethane coil edge protectionattached to legs, feet, or both.
OPTIONALI.D. PHOTO-ELECTRIC SENSORPhoto-electric sensor indicateslifter foot alignment with coil I.D.
OPTIONAL INDICATOR LIGHTS Visual indicator for various functions.
OPTIONAL SEVEREDUTY DRIVE PACKAGEFor high cycle operations.
OPTIONAL PARKING& MAINTENANCE STANDSProvides storage for lifter whennot in use and easy access fornormal inspection & maintenance.See page 38.
STANDARDLOCKOUT LIMIT SWITCHPrevents inadvertent leg opening during lift.
STANDARD ANTI-CLAMP & TOE ROLLERSProtects sides of coil from lifter damage.
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 41/67
HTC TELESCOPIC COIL LIFTERWITH HAND WHEELPRODUCT FEATURES:
Chain wheel provides easy manual operation.
Two-sided coil lifter requires less aisle space.
Curved lifting pad minimizes coil damage.
Self locking worm gear prevents legs frominadvertent opening.
Available with hand wheel leg drive option.
Available with motorized leg drive option.
Complies with ASME standards.
CM CADY BELOW THE HOOK LIFTERS
Coil
Bail FootModel Capacity Width HR Weight Number (tons) Min. Max. Throat Headroom A B C T D F (lbs.)
HTC548 5
16 48 28 52 2 4 7 14-1/2
4
485 HTC560 20 60 26 50 2 4 7 1 590
HTC1048 10
16 48 32 63 2 4 7 1-1/45-1/2
4
725 HTC1060 20 60 30 61 2 4 7 1-1/4 810
HTC1560 15
20 60 34 69 2-1/2 5 9 1-1/26-1/2
4
930 HTC1572 24 72 32 67 2-1/2 5 9 1-1/2 1075
Dimensions (inches)
Other sizes available, consult factory.
C
HR
BT
THROAT
MAX.
MIN.
D
F
24"
SPECIFICATIONS
Dimensions (inches)
Coil
Model Capacity Width HRBail Foot
Weight
Number (tons) Min. Max. Throat Headroom A B C T D F L (lbs.)
NCL1048 10 20 48 24 58 2 4 7 1-1/4 3-1/4 4 7 210
NCL1548 15 20 48 28 66 2-1/2 5 9 1-1/2 3-1/2 4 7 352
NCL2060 20 24 60 30 82 2-1/2 5 9 1-1/2 3-5/16 4 6 760
NCL2560 25 24 60 32 94 2-3/4 6 12 2-1/4 4-3/4 4 8 1235
NCL3072 30 24 72 26 83 3-1/2 7 16 2-1/4 4-3/4 4 8 1170
Other sizes available, consult factory.
SPECIFICATIONS
NCL NARROW AISLECOIL LIFTERPRODUCT FEATURES:Most economical of the two-sided coil lifters.
Two-sided coil lifter requires less aisle space.
Lifting hook width adjustment pin is easy to use.
Hooks manufactured from high tensile alloy steel.
Coil width adjustment indicators for easyhook placement.
Optional coil protection available.
Complies with ASME standards.D
L
HR
T
C
BA
MIN.
MAX.
THROAT
F
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 42/67
CM CADY BELOW THE HOOK LIFTERS38
PRODUCT FEATURES:
Individually designed for your lifter's size and capacity.
Heavy duty tubular construction.
Minimizes lifter storage space requirements.
Stabilizes lifter for personnel safety.
Allows for easy access to lifter.
Allows for easy inspection of lifter.
Minimizes time required to engage lifter with crane hook.
CM CADY BELOW THE HOOK LIFTERS
PARKING STANDSFOR COIL LIFTERS
COI L L I F T E RS
Used to store all C-Hook type lifters
(Models: HDC, SCC, CSC).
For storage of two sided coil lifters
(Models: HTC and NCL).
For storage and maintenance of two sided lifters.
Personnel platforms provide ease of access
to drive system for maintenance and inspection
of motorized units.
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 43/67
HDCUHEAVY DUTY COIL UPENDER
CM CADY BELOW THE HOOK LIFTERS
Model Capacity Weight
Number (tons) A B C D E F G (lbs.)
HDCU136 1 36 36 24* 60 48 36 51 1500
HDCU236 2 36 36 24* 60 48 36 51 1600
HDCU342 3 42 42 24* 66 56 42 60 2000
HDCU442 4 42 42 24* 66 56 42 60 2200
HDCU548 5 48 48 30 78 61 48 66 2750
HDCU7548 7-1/2 48 48 30 78 61 48 66 2900
HDCU1054 10 54 54 30 84 60 55 74 3700
HDCU12554 12-1/2 54 54 36 90 69 55 74 4000
HDCU1560 15 60 60 36 96 73 60 80 4500
HDCU2060 20 60 60 36 96 73 60 80 6200
HDCU2572 25 72 72 43 115 88 72 96 10000
HDCU3072 30 72 72 48 120 88 72 96 12000
* Platform over 42” x 42” will have height of 30”. Pallets must not extend over platform sides. Other sizes available, consult factory.
Dimensions (inches)
NOTE: If load is not a coil, specifycenter of gravity of load being rotated.
SHOWN WITH V-BLOCK OPTION
SPECIFICATIONS
PRODUCT FEATURES
Fast and convenient way to upend coils to 90°.
Heavy duty disc brake will stop load in any position.
Reversing magnetic starter with 115 volt pendant control.
Stop travel/over travel limit switches.
PRODUCT OPTIONSLarger platforms available.
V-Block, either standard or urethane faced.
180° horizontal rotation which permits loading,and unloading from same side.
Fork lift truck pick-up pockets.
OVERALL HEIGHT: A+ C=D
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 44/67
CM CADY BELOW THE HOOK LIFTERS40 CM CADY BELOW THE HOOK LIFTERS
COI L L I F T E RS
LPULOW PLATFORM COIL UPENDERPRODUCT FEATURES:
Lower platform design offers easier access by operator.
Fast and convenient way to upend coils to 90°.
Requires less platform height.
Magnetic starter with 115 volt pendant control.
Double acting hydraulic cylinders.
Relief valve prevents over-capacity rotation.
Stop limit switches at each end of rotation.
PRODUCT OPTIONS:Larger platforms available.
Unequal platform sizes available.
V-Block, either standard or urethane faced.
180° horizontal rotation, which permits loadingand unloading from same side.
A
C
A
E
B
Pallets must not extend over platform sides. Other sizes available, consult factory.
Dimensions (inches)
Model Capacity Weight
Number (tons) A B C D E (lbs.)
LPU100036 1/2 36 36 8-1/4 44-1/4 78 1500
LPU136 1 36 36 9-1/4 45-1/4 78 1600
LPU1536 1-1/2 36 36 10-1/4 46-1/4 78 1800 LPU236 2 36 36 12-1/4 48-1/4 78 2000
LPU2542 2-1/2 42 42 13-1/4 55-1/4 90 2200
LPU342 3 42 42 14-1/4 56-1/4 90 2300
LPU3542 3-1/2 42 42 15-1/4 57-1/4 90 2400
LPU442 4 42 42 17-3/8 59-3/8 90 2600
LPU4548 4-1/2 48 48 18-3/8 66-3/8 102 2800
LPU548 5 48 48 19-3/8 67-3/8 102 3000
LPU648 6 48 48 20-3/8 68-3/8 102 3600
LPU7548 7-1/2 48 48 20-3/8 68-3/8 102 5000
SHOWN WITH V-BLOCK OPTION
OVERALL HEIGHT: A+C=D
SPECIFICATIONS
NOTE: If load is not a coil, specifycenter of gravity of load being rotated.
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 45/67
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 46/67
CM CADY BELOW THE HOOK LIFTERS42 CM CADY BELOW THE HOOK LIFTERS Products highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
S HE E T
SPECIFICATIONS
PLPLATE LIFTERThe Plate Lifter provides a quick and easy solution for
handling thick plates, one at a time. Simply position thePlate Lifter over your load, check to see that the hooks
are engaged and lift.
PRODUCT FEATURESRugged-chain rigging.
Heavy duty plate hooks.
Design allows for easier crane alignment.
Steel spreader stabilizes two hooks.
Complies with ASME standards.
Model Rated Dimensions (inches) Max. Plate Weight
Number Capacity (tons) A B C D E F HR Width (in.) (lbs.)
PL5 5 1 3.5 6 3 2.3 84 58 96 185
PL10 10 1.25 4.38 7.5 5 3.8 84 58 96 320
* Headroom at maximum plate width.
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 47/67
HSLHEAVY DUTY SHEET LIFTER
CM CADY BELOW THE HOOK LIFTERSProducts highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
Dimensions (inches)
Model Capacity Bundle Width HR Shoe Min. Bail Opening Weight Number (tons) Min. Max. Headroom D Aisle A B C T (lbs.)
HSL348 16 48 920
HSL360 3 16 60 28 2.63 9 1.5 3 5 .75 950
HSL372 16 72 980
HSL548 16 48 1125
HSL560 16 60 1170
HSL572 5 16 72 29 2.63 9 2 4 6 1 1220
HSL584 16 84 1270 HSL596 16 96 1550
HSL1048 16 48 1510
HSL1060 16 60 1570
HSL1072 10 16 72 30 3.5 11 2 4 7 1.5 1640
HSL1084 16 84 1700
HSL1096 16 96 1770
HSL1548 16 48 1570
HSL1560 16 60 1640
HSL1572 15 16 72 32 3.5 12 2.5 5 9 1.5 1700
HSL1584 38 84 1960
HSL1596 38 96 2030
C
A
B T
Other sizes available, consult factory.
SPECIFICATIONS
Bail Opening
PRODUCT FEATURES
Versatile handling of bundles, sheets,plates and other materials stacked horizontally.
Low headroom design for optimum lifting capabilities.
One person operation minimizes handling cost.
Self-locking worm gear drive for leg adjustment is standard.
Easy adjustment for different sheet widths.
Rack and pinion leg drive.
Designed for ease of maintenance.
Designed for greater sheet width range.
Complies with ASME standards.
PRODUCT OPTIONS
Hand wheel lockout.
Motorized leg adjustment.
Chain-wheel leg adjustment.
Extended length hand wheel leg adjustment.
End chains with plate hooks (recommendedfor all widths 72" and greater).
Extended grab shoe lengths available.
Additional bundle clearance available (longer legs).
DO NOT LIFT LOOSELY BUNDLED,THIN OR OILY SHEETS
W A R N I N G
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 48/67
CM CADY BELOW THE HOOK LIFTERS44
PRODUCT FEATURES
Standard light duty unit for handlingsmaller size sheets and bundles.
Size and versatility allows for handling of crates,bins and other smaller size containers.
Side oriented extended length handwheel adjustment standard.
Self locking worm gear leg drive system.
Complies with ASME standards.
CM CADY BELOW THE HOOK LIFTERS
SBSL SMALL BUNDLESHEET LIFTER
PRODUCT FEATURESLightweight.
Channel steel construction.
84" grab shoe length.
Complies with ASME standards.
SSL STANDARD DUTYSHEET LIFTER
Products highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
S HE E T
Model Capacity Bundle Width Min. HR Weight Number (tons) Min. Max. Aisle A B C Headroom (lbs.)
SBSL1536 1-1/2 12 36 512
SBSL1548 1-1/2 16 48 525
SBSL348 3 16 48 670
SBSL360 3 20 60 736
SBSL548 5 16 48 750
SBSL560 5 20 60 763
Dimensions (inches)
8
8
8
1-1/2 3 8 42
1-1/2 5 8 44
2 7 8 52
SPECIFICATIONS
A
C
B T
Other sizes available, consult factory.
Model Capacity Bundle Width HR Shoe Min. Bail Opening Weight
Number (tons) Min. Max. Headroom D Aisle A B C T (lbs.)
SSL236 15 36 510
SSL248 2 20 48 29 2-1/2 8 1-1/2 3 5 3/4 560
SSL260 24 60 630
SSL548 20 48 670
SSL560 5 24 60 32 2-5/8 8 2 4 6 1 750
SSL572 30 72 830
SSL7548 20 48 840
SSL7560 7-1/2 24 60 34 2-1/2 10 2 4 6 1 900
SSL7572 30 72 980
SPECIFICATIONS
BAIL OPENING
Dimensions (inches)
DO NOT LIFT LOOSELY BUNDLED,THIN OR OILY SHEETS
W A R N I N G
DO NOT LIFT LOOSELY BUNDLED,THIN OR OILY SHEETS
W A R N I N G
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 49/67
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 50/67
CM CADY BELOW THE HOOK LIFTERS46
PRODUCT FEATURESOnce the bail pin is set the pallet lifter remains balanced
whether full or empty to make the job faster and safer.
Adjustable bail provides for balanced handlingof items with different load centers.
Adjustable throat allows for the correct handlingof higher stacked loads.
Adjustable forks allow for proper placementof the forks spread.
The auto return bail automatically levels empty pallet liftersaving time and effort.
Heavy duty construction for years of trouble free service.
Complies with ASME standards.
Use your crane to handle a wide range of loads.
CM CADY BELOW THE HOOK LIFTERS ) ) IN-STOCK Products highlighted green ship in 3 to 5 days.
P A L L E T
K J
G
F
H
E
BAIL
C
A B T
Rated Fork Bail Throat
Model Capacity H J Number (tons) E F G
Min. Max. A B C T Min. Mid Max.
ALL2 2 43.00 2.00 4.00 17.50 36.00 .88 3.00 5.00 0.75 40.68 52.68 64.18
Weight
(lbs.)
515
SPECIFICATIONS
HR Headroom HR Headroom HR Headroom
(at min. throat) (at mid throat) (at max. throat)
K K K
Min. Max. Min. Max. Min. Max.
54.88 60.68 66.63 72.44 78.38 84.18
Dimensions (in.)
CLOSE-UP OF ADJUSTABLE FORK
BA IL STOP PIN
ALL ADJUSTABLE LOAD LIFTER
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 51/67
WPLWHEELED PALLET LIFTER
PRODUCT FEATURESWheels allow for movement of unit without crane.
Dual lift points eliminates need for counterweight.
Extremely lightweight for ease of handling.
Complies with ASME standards.
LPL LIGHTWEIGHT
PALLET LIFTERPRODUCT FEATURESDual lift points eliminates need for counterweight.
Extremely lightweight for ease of handling.
Maintenance free — no moving parts.
Complies with ASME standards.
Products highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP CM CADY BELOW THE HOOK LIFTERS
L
N
W
M
J
HR
AB x C
E
W
L
J
HR
MN
AB x C
E
Dimensions (inches)
Model Capacity Forks Bail Weight Number (tons) L M N W E A B C J HR (lbs.)
LPL148 1 36 2 2 25 24 1/2 2-1/2 3-3/4 48 58 245
LPL248 2 36 4 2 25 24 3/4 2-3/4 4-1/2 48 62 425
LPL348 3 36 4-1/2 2-1/2 27 24 1 3-1/2 5 48 65 610
Dimensions (inches) Model Capacity Forks Bail Weight
Number (tons) L M N W E A B C J HR (lbs.)
WPL148 1 36 2 2 25 24 1/2 2-1/2 3-3/4 48 60 245
WPL248 2 36 4 2 25 24 3/4 2-3/4 4-1/2 48 62 405
SPECIFICATIONS
SPECIFICATIONS
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 52/67
CM CADY BELOW THE HOOK LIFTERS48
PRODUCT FEATURES:
Converts overhead crane to lift truck. Counter balanced to hang level when empty. Maintenance free. Allows for ease of loading/unloading
in not easily accessible areas. Complies with ASME standards.
CM CADY BELOW THE HOOK LIFTERS
FPL STANDARD FIXEDFORKS PALLET LIFTER
PRODUCT FEATURES: Double frame design for heavy capacities. Counter balanced to hang level when empty. Maintenance free. Complies with ASME standards.
HPL HEAVY DUTY FIXEDFORKS PALLET LIFTER
Products highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
P A L L E T
E
B x C
NL
W
M
A
HR
J
Dimensions (inches)
Model Capacity Forks Bail Weight Number (tons) L M N W E A B C J* HR (lbs.)
FPL136 1 36 2 2 25 18 1 6 5 48 57-1/2 292
FPL142 1 42 2 2 25 21 1 6 5 48 57-1/2 310
FPL148 1 48 2 2 25 24 1 6 5 48 58-1/2 371
FPL1536 1-1/2 36 3 2 25 18 1 6 5 48 58-1/2 388
FPL1542 1-1/2 42 3 2 25 21 1 6 5 48 58-1/2 432
FPL1548 1-1/2 48 3 2 25 24 1 6 5 48 58-1/2 459
FPL236 2 36 3 2 25 18 1 6 5 48 59-1/2 448
FPL242 2 42 4 2 25 21 1 6 5 48 59-1/2 536
FPL248 2 48 4 2 25 24 1 6 5 48 59-1/2 627
FPL342 3 42 4-1/2 2-1/2 25 21 1-1/2 6-1/8 7 48 61-1/2 766
FPL348 3 48 4-1/2 2-1/2 27 24 1-1/2 6-1/8 7 48 61-1/2 823
FPL354 3 54 4-1/2 2-1/2 30 27 1-1/2 6-1/8 7 48 61-1/2 969
FPL448 4 48 5 3 27 24 1-1/2 6-1/8 7 48 63-1/2 1176
FPL460 4 60 5 3 30 30 1-1/2 6-1/8 7 60 75-1/2 1393
FPL548 5 48 5 3 30 24 1-1/2 6-1/8 7 48 63-1/2 1193
FPL560 5 60 4-1/2 2-1/2 38 30 1-1/2 8-1/8 7 60 75-1/2 1403
SPECIFICATIONS
L
N
W
M
HR
AB x C
JE
Dimensions (inches) Model Capacity Forks Bail Weight
Number (tons) L M N W E A B C J* HR (lbs.)
HPL7548 7-1/2 48 6 2-1/2 30 24 2 5 9 48 65 1910
HPL7560 7-1/2 60 10 3 38 30 2 5 9 60 79 2400
HPL1048 10 48 10 3 30 24 2 5 9 48 69 1950
HPL1060 10 60 10 3 38 30 2 5 9 60 81 3100
HPL1548 15 48 10 3 38 24 2 6 12 60 84 2250
HPL1560 15 60 10 3 38 30 2 6 12 60 75 3800
HPL2060 20 60 7 4 38 30 2-1/4 6 12 60 88 4300
HPL2072 20 72 8-1/4 4 44 36 2-1/4 6 12 60 88 4850
SPECIFICATIONS
* We recommend an additional 3"-4" clearance above the load for ease of loading and unloading the lifter.
CENTER OF THE HOIST ANDBAIL MUST BE IN-LINE WITH
THE LOAD’S CENTER OF GRAVITY.
W A R N I N G
* We recommend an additional 3"-4" clearance above the load for ease of loading and unloading the lifter.
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 53/67
CM CADY BELOW THE HOOK LIFTERS
APL STANDARD ADJUSTABLEFORKS PALLET LIFTERPRODUCT FEATURES:
Converts overhead crane into lift truck.
Pry bar adjustable forks to handle multiple pallet sizes.
Counter balanced to hang level when empty.
Complies with ASME standards.
HAPL HEAVY DUTY ADJUSTABLEFORKS PALLET LIFTERPRODUCT FEATURES:
Forged forks gives ease of adjustment.
Smaller fork sizes gained using forged forks.
Double frame design for heavy capacities.
Complies with ASME standards.
CENTER OF THE HOIST ANDBAIL MUST BE IN-LINE WITH
THE LOAD’S CENTER OF GRAVITY.
W A R N I N G
L
W
M N
B x CA
J
HR
E
Dimensions (inches)
Model Capacity Forks W Bail Weight Number (tons) L M N Min. Max. E A B C J* HR (lbs.)
APL136 1 36 2 2 16 38 18 1 3 5 48 58 670
APL142 1 42 2 2 16 38 21 1 3 5 48 58 760
APL148 1 48 2 2 16 38 24 1 3 5 48 59 780
APL1536 1-1/2 36 3 2 16 38 18 1 3 5 48 59 845
APL1542 1-1/2 42 3 2 16 38 21 1 3 5 48 59 900
APL1548 1-1/2 48 3 2 16 38 24 1 3 5 48 60 950
APL236 2 36 3 2 16 38 18 1 3 5 48 60 980
APL242 2 42 4 2 16 38 21 1 3 5 48 60 1060
APL248 2 48 4 2 16 38 24 1 3 5 48 59-1/2 1080
APL342 3 42 4-1/2 2-1/2 16 38 21 1-1/2 4 7 48 61-1/2 1250
APL348 3 48 4-1/2 2-1/2 16 38 24 1-1/2 4 7 48 61-1/2 1368
APL354 3 54 4-1/2 2-1/2 16 38 27 1-1/2 4 7 48 63 2005
APL448 4 48 5 3 19 38 24 1-1/2 4 7 48 64 1600
APL460 4 60 5 3 19 38 30 1-1/2 4 7 60 76 2240
APL548 5 48 5 3 19 38 24 1-1/2 4 7 48 65 1865
APL560 5 60 4-1/2 2-1/2 19 38 30 1-1/2 4 7 60 77 2190
SPECIFICATIONS
* We recommend an additional 3"-4" clearance above the load for ease of loading and unloading the lifter.
WL
NM
EHR
J
A
B x C
Dimensions (inches)
Model Capacity Forks W Bail Weight
Number (tons) L M N Min. Max. E A B C J* HR (lbs.)
HAPL7548 7-1/2 48 6 2-1/2 20 48 24 2 5 9 48 64-1/2 2400
HAPL7560 7-1/2 60 6 3 20 48 30 2 5 9 60 77-1/2 3300
HAPL7572 7-1/2 72 6 3 20 48 36 2 5 9 60 80 3750
HAPL1048 10 48 6 3 20 48 24 2 5 9 48 68 2900
HAPL1060 10 60 6 3 20 48 30 2 5 9 60 79-1/2 4300
HAPL1072 10 72 7 3 20 48 36 2 5 9 60 79-1/2 4900
HAPL12548 12-1/2 48 6 3 20 48 24 2 6 12 48 82 3900
HAPL12560 12-1/2 60 6 3 20 42 30 2 6 12 60 82 4700
HAPL12572 12-1/2 72 7 3-1/2 20 38 36 2 6 12 60 82 5500
SPECIFICATIONS
* We recommend an additional 3"-4" clearance above the load for ease of loading and unloading the lifter.
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 54/67
CM CADY BELOW THE HOOK LIFTERS50
P A L L E T
HWPL HAND WHEEL ADJUSTABLEFORKS PALLET LIFTER
HHWPL HEAVY DUTY HAND WHEEL ADJUSTABLE FORKS PALLET LIFTER
PRODUCT FEATURES
Hand wheel adjustable forks for ease of adjustment.
Forged forks allow for smaller fork sizes.
Double frame design for heavy capacities.
Complies with ASME standards.
PRODUCT FEATURES
Hand wheel adjustable forks for ease of adjustment.
Converts overhead crane to lift truck.
Handles multiple pallet sizes.
Complies with ASME standards. L
W
MN
J
HR
B x CA
E
Dimensions (inches)
Model Capacity Forks W Bail Weight Number (tons) L M N Min. Max. E A B C J* HR (lbs.)
HWPL136 1 36 2 2 16 38 18 1 3 5 48 58 890
HWPL142 1 42 2 2 16 38 21 1 3 5 48 58-1/2 800
HWPL148 1 48 2 2 16 38 24 1 3 5 48 58-1/2 1051
HWPL1536 1-1/2 36 3 2 22-1/2 38 18 1 3 5 48 58 1000
HWPL1542 1-1/2 42 3 2 22-1/2 38 21 1 3 5 48 60 1055
HWPL1548 1-1/2 48 3 2 22-1/2 38 24 1 3 5 48 60 1130
HWPL236 2 36 3 2 22-1/2 38 18 1 3 5 48 60 1105
HWPL242 2 42 4 2 23 38 21 1 3 5 48 60 1351
HWPL248 2 48 4 2 24 38 24 1 3 5 48 59-1/2 1360
HWPL342 3 42 5 2 23 38 21 1-1/2 4 7 48 61-1/2 1465
HWPL348 3 48 4-1/2 2-1/2 24 38 24 1-1/2 4 7 48 63-1/2 1600
HWPL354 3 54 4-1/2 2-1/2 24 38 27 1-1/2 4 7 48 63 2130
HWPL448 4 48 5 3 28-1/2 38 24 1-1/2 4 7 48 62-1/2 2035
HWPL460 4 60 5 3 28-1/2 38 30 1-1/2 4 7 60 76 2385
HWPL548 5 48 5 3 25-1/2 38 24 1-1/2 4 7 48 65 2550
HWPL560 5 60 4-1/2 2-1/2 25-1/2 38 30 1-1/2 4 7 60 79 2740
SPECIFICATIONS
* We recommend an additional 3"-4" clearance above the load for ease of loading and unloading the lifter.
N
L
E
W
M
J
HR
A
B x C
Dimensions (inches)
Model Capacity Forks W Bail Weight Number (tons) L M N Min. Max. E A B C J* HR (lbs.)
HHWPL7548 7-1/2 48 6 2-1/2 20 48 24 2 5 9 48 66 2600
HHWPL7560 7-1/2 60 6 3 20 48 30 2 5 9 60 77-1/2 3500
HHWPL7572 7-1/2 72 6 3 20 48 36 2 5 9 60 80 3950
HHWPL1048 10 48 6 3 20 48 24 2 5 9 48 65-1/2 3150
HHWPL1060 10 60 6 3 20 48 30 2 5 9 60 77-1/2 3850
HHWPL1072 10 72 7 3 20 48 36 2 5 9 60 82 4250
HHWPL12548 12-1/2 48 6 3 20 48 24 2 6 12 48 82 4200
HHWPL12560 12-1/2 60 6 3 20 48 30 2 6 12 60 82 4950
HHWPL12572 12-1/2 72 7 3-1/2 20 48 36 2 6 12 60 82 5750
HHWPL1560 15 60 7 3-1/2 20 48 30 2 6 12 60 82 5300
HHWPL1572 15 72 8 3-1/2 20 48 36 2 6 12 60 82-1/2 6400
SPECIFICATIONS
* We recommend an additional 3"-4" clearance above the load for ease of loading and unloading the lifter.
CENTER OF THE HOIST ANDBAIL MUST BE IN-LINE WITH
THE LOAD’S CENTER OF GRAVITY.
W A R N I N G
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 55/67
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 56/67
CM CADY BELOW THE HOOK LIFTERS52 CM CADY BELOW THE HOOK LIFTERS
L I F T I NG
OVERVIEW OF LIFTING TONGS
This Dual Gripping Tong system willsupport and stabilize longer, larger loadsthat can sustain the force of the entire loadon a smaller surface area. When the narrowgripping arms engage the item, significantpressure will be applied. Ideal for handlingbundles of steel that are round in shape.
CUSTOM FRICTION TONGS
The Single Gripping Tong is used to liftcylindrical objects that are short in lengthsuch as large diameter round bar, tube or rollsof material.
We have integrated both a manual latch orthe Auto-Latch mechanism into this family oftongs. The selection of the latch is dependanton the application.
The Dual Gripping Tong systemsupports and stabilizes longer, largerloads. The large contoured pads distributethe force applied to the load over a largersurface area. Optional pad linings, nylonor rubber pads protect the load fromdamage. This is ideal when handling rollsof fabric or polyethylene film.
APPLICATION IDEAS FOR CUSTOM FRICTION TONGS TO LIFT ROLLS, TUBES AND CYLINDRICAL MATERIALS
PIPE TONGS
CM Cady Lifting Tongs are available in standard configurations to fit many
common applications. However, not all lifting challenges will be solved witha standard tong. CM Cady has the experienced team that can create a customdesigned lifting tong to fit the specifications provided. All custom CM Cady Liftingtongs are designed to comply with ASME standards.
FRICTION TONGS
Grab arms conform to load surface with outside diametersupported below center of load for additional holdingadvantage. Designed to lift such products as rolls, tubes,and other cylindrical materials.
INDENTATION TONGSGrab arms grip vertical sides of straight sided materials. Custom grip padsare required to have sufficient coefficient of friction between material lifted andgrip pads. Grip pads may be rubber, steel, belting, points and other. Designed
to lift such products as bales, boxes, ingots, and other straight sided materials.
SUPPORTING TONGS
Grab arms have feet to support underneath load. Designed to handle constantsizes of material to maintain a horizontal plane on the lifting feet. Dunnage undermaterial required to insert/remove feet of tong. Designed to lift constant sizedboxes, containers, crates, and other constant sized square shaped material.
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 57/67
BLT BALE LIFTING TONGSSTANDARD INDENTATION TYPE
PRODUCT FEATURESLifts bales of paper, cotton,
and other materials.
Wide gripping surface for load stability.
Includes Auto-Latch mechanismfor one person operation.
Complies with ASME standards
Products highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP CM CADY BELOW THE HOOK LIFTERS
APPLICATION IDEASFOR INDENTATION TONGS
TO LIFT BALES, BOXES, INGOTS& OTHER STRAIGHT-SIDED MATERIALS
Pressure Tongs can be used to lift objectsthat have sufficient structure and densitythat they will not be damaged by theapplication of significant lateral force.
An example of this is lifting concretehighway barriers and steel ingotsby using Barrier Tongs.
They can also be used in situationswhere the lifted item can accommodatea gripping action that may indent thesides of the load. Cotton and cardboardbales are a good example of loads thatcan be lifted with a Pressure Tongeven though they are not rigid.
Model Rated Capacity Bail Width Unit Height Pad Dimensions (in.) Weight Number (tons) (in.) Loaded (in.) Width Height (lbs.)
BLT100036 1/2 36 52 18 9 280
BLT100048 1/2 48 56 18 9 300
BLT136 1 36 52 18 9 280
BLT148 1 48 56 18 9 300
SPECIFICATIONS
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 58/67
CM CADY BELOW THE HOOK LIFTERS54
PRODUCT FEATURES Broad capacity range.
Low headroom design.
Painted safety red.
Complies with ASME standards.
CM CADY BELOW THE HOOK LIFTERS
DT DIE LIFTING TONGSSTANDARD SUPPORT TYPE
Products highlighted red ship in 10 to 14 business days. ) ) QUICKSHIP
L I F T I NG
Dimensions (inches)
Model Capacity Max. Weight
Number (lbs.) A B C D E F G H (lbs.)
DT120 2000 20 29 3/4 29 4 5/8 1 8 7 29
DT12528 2500 28 40 1/4 39 5 3/4 1 1/4 8 9 1/2 52
DT1538 3000 38 51 3/4 47 1/2 6 7/8 1 1/2 10 10 3/4 86
SPECIFICATIONS
SUPPORT TONGS are used for constant sizedcontainers. It has an arm design that allows significantheight on the lifted item and includes an Auto-Latchmechanism for single person control. This Auto-Latchallows the operator to position, engage, lift, move, placeand disengage the lifted item without assistance fromanother individual or without moving from the crane/hoistcontrol station.
Support Tongs are also available with the Auto-Latch andadded length to handle longer loads. The top guide stopssimplify the auto-engagement and single operator use.
APPLICATION IDEASFOR SUPPORTING TONGS
TO LIFT CONSTANT SIZED BOXES,CONTAINERS AND CRATES
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 59/67
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 60/67
CM CADY BELOW THE HOOK LIFTERS56
A P P L I CA T I ON
Contact: ______________________________________________
Company:_____________________________________________
Address: ______________________________________________
City, State, Zip: ________________________________________
Phone:________________________________________________
Fax: __________________________________________________
Email:_________________________________________________
For a price quote on your specific application,
please complete this above form
and fax to 1(716) 689.5644
or you can complete this form online at
www.cmworks.com / cady
LOAD INFORMATION
Briefly describe load:
Maximum weight:
Number of pickup points:
Distance between (spacing) pickup points:
Is load center of gravity centered between outer pick points? Yes No
If no, specify location in reference to pick points (attach a diagram if necessary):
What type of attachment to the load?
Shackles Swivel Hooks Lifting Slings Other (specify)
Describe specific requirements:
CRANE INFORMATION
Approximate distance between load and crane:
Single crane hoist information
Capacity:
Measurement Tolerances
+0 = Measurement should be no larger but can be
smaller than actual.
-0 = Measurement should be no smaller but can be
larger than actual.
+/- = Measurement can be larger or smaller than actual.
INCHES
A ________+0
B ________+0
C ________+0
D ________-0
E ________-0
F ________+/-
G ________-0
H ________-0
CRANE HOOK DATA
Dual crane hoist information
Distance between:
Same capacity? Yes No
If no, specify capacities:
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 61/67
CM CADY BELOW THE HOOK LIFTERS
For a price quote on your specific application,
please complete this above form
and fax to 1(716) 689.5644
or you can complete this form online at
www.cmworks.com / cady
Contact: ______________________________________________
Company:_____________________________________________
Address: ______________________________________________
City, State, Zip: ________________________________________
Phone:________________________________________________
Fax: __________________________________________________
Email:_________________________________________________
Please specify the desired model number:
ROLL INFORMATION:
Minimum: Length Diameter Weight
Maximum: Length Diameter Weight
SHAFT / I.D. INFORMATION:
Minimum: Length Diameter
Maximum: Length Diameter
Any clearance requirements: i.e., headroom, machinery obstructions, etc.
J-HOOK INFORMATION
Is shaft turning when roll is lifted: Yes No
Hook style: Pivoting Fixed
POWER REQUIREMENTS (FOR MOTORIZED UNITS)
DC
AC Voltage Phase Cycle
Additional application information or option requirements:
SHAFT / I.D. DIA.
THROAT
MAX. ROLL DIA.
MIN./MAX. ROLL LENGTH
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 62/67
CM CADY BELOW THE HOOK LIFTERS58
A P P L I CA T I ON
Contact: ____________________________________________
Company: __________________________________________
Address:____________________________________________
City, State, Zip: ______________________________________
Phone: _____________________________________________
Fax: ________________________________________________
Email: ______________________________________________
For a price quote on your specific application,
please complete this above form
and fax to 1(716) 689.5644
or you can complete this form online at
www.cmworks.com / cady
Specify type of lifter desired:
COIL INFORMATION:
Minimum: O.D. I.D. Width/Height Weight
Maximum: O.D. I.D. Width/Height Weight
In which position will coil be handled? Eye Vertical Eye Horizontal
Describe coil material: Steel Aluminum Brass/Copper
Describe coil material Other, describe:
Describe characteristics of coil (ex. tightly wound, banded, telescoped, oily, hot, etc.):
Describe where coil is resting and where it will be placed (ex. on a flat surface, pallet, turnstile arm, etc.):
Do the coils need to be protected from damage? Yes, describe: No
ADDITIONAL INFORMATION:
Are reversing motor controls required? No Yes If yes, Furnished Loose Mounted On Lifter
CMAA Crane Duty Class (A, B, C, D, E, F):
Please use the space provided below for additional application information or lifter options required (ex: headroom
limitations, clearances where load is picked up and placed, etc.):
Measurement Tolerances
+0 = Measurement should be no larger but can be smaller
than actual.
-0 = Measurement should be no smaller but can be larger
than actual.
+/- = Measurement can be larger or smaller than actual.
INCHES
A ________+0
B ________+0
C ________+0
D ________-0
E ________-0F ________+/-
G ________-0
H ________-0
CRANE HOOK DATA:
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 63/67
CM CADY BELOW THE HOOK LIFTERS
Contact: ____________________________________________
Company: __________________________________________
Address:____________________________________________
City, State, Zip: ______________________________________
Phone: _____________________________________________
Fax: ________________________________________________
Email: ______________________________________________
For a price quote on your specific application,
please complete this above form
and fax to 1(716) 689.5644
or you can complete this form online at
www.cmworks.com / cady
BUNDLE INFORMATION:
Bundle Dimensions:
Minimum: Length Width Height Weight
Maximum: Length Width Height Weight
Specify material being lifted:
Is the bundle palletized? Yes No If yes, specify pallet size:
Sheet Condition: Dry Oily Banded Loose
ADDITIONAL INFORMATION:
Please provide the model and/or serial number if this is to replace an existing CM Cady lifter:
Operation Required Motorized Manual
If motorized, please specify DC AC Voltage Phase Cycle
Pendant Required Yes No
Should the controls be shipped loose for field mounting? Yes No
Please provide duty cycle of lifter (lifts per hour and hours per day used):
Please provide Crane Classification (A, B, C, D, E, F):
Please use the space below to provide additional application information or options required.
For example: headroom issues, space restrictions, lifter restrictions or options such as a chainwheel or end chains.
Measurement Tolerances
+0 = Measurement should be no larger but can be smaller
than actual.
-0 = Measurement should be no smaller but can be larger
than actual.
+/- = Measurement can be larger or smaller than actual.
INCHES
A ________+0
B ________+0
C ________+0
D ________-0
E ________-0
F ________+/-
G ________-0
H ________-0
CRANE HOOK DATA:
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 64/67
CM CADY BELOW THE HOOK LIFTERS60
A P P L I CA T I ON
Contact: ____________________________________________
Company: __________________________________________
Address:____________________________________________
City, State, Zip: ______________________________________
Phone: _____________________________________________
Fax: ________________________________________________
Email: ______________________________________________
For a price quote on your specific application,
please complete this above form
and fax to 1(716) 689.5582
or you can complete this form online at
www.cmworks.com / cady
LOAD INFORMATION - FRICTION TONGS
Minimum: O.D. I.D. Height Weight
Maximum: O.D. I.D. Height Weight
Describe product/material being lifted:
Please describe how product is resting (Ex. On a flat surface, in a rack, etc.):
LOAD INFORMATION - INDENTATION/SUPPORTING TONGS
Minimum: Width Length Height Weight
Maximum: Width Length Height Weight
Describe product/material being lifted:
Will the tongs lift making contact to the width or length side?
ADDITIONAL INFORMATION - ALL TYPES
Does the load need to be protected from lifter damage? Yes No
Is an Auto-Latch desired?
Please provide duty cycle of lifter (lifts per hour and hours per day used):
Please provide Crane Classification (A, B, C, D, E, F):
Please use the space below to provide additional application information or options required.For example: headroom issues and space or lifter restrictions.
Measurement Tolerances
+0 = Measurement should be no larger but can be smaller
than actual.
-0 = Measurement should be no smaller but can be larger
than actual.
+/- = Measurement can be larger or smaller than actual.
INCHES
A ________+0
B ________+0
C ________+0
D ________-0
E ________-0
F ________+/-
G ________-0
H ________-0
CRANE HOOK DATA:
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 65/67
CM CADY BELOW THE HOOK LIFTERS
Below-The-Hook Lifters by CM Cady have been designed for specific tasksto withstand the particular forces imposed. Guidelines for installation, inspection,maintenance and repair, safe operation and operator training of these lifters follow:
INSTALLATION
Below Hook Lifters shall be assembled and installed in
accordance with the manufacturer’s instructions, unless other
specific arrangements have been approved in writing by
manufacturer. When lifter/auxiliary power supply is required,
user inspection shall ensure that the power source complies
with ANSI/NFPA 70, National Electrical Code and shall include
a power disconnect switch as required in accordance with
ANSI/NFPA 70 based on the lifters requirements. If electrical
connections are made, the power supply and correspondingpower disconnects shall be connected to the line side (power
supply side) of the crane disconnect or to an independent
circuit as specified in the manufacturer’s instruction manual.
Check for correct rotation of all pumps and power units,
lubrication of moving parts, and filling of reservoirs, all in
accordance with manufacturer’s instructions.
OPERATOR TRAINING
Lifters shall be operated in accordance with manufacturer’s
instruction manual, and by personnel who have received
instructions described in the “Operating Practices” section
of these guidelines. Training shall also include instruction
regarding: 1. Details of the lifting cycle.
2. Application of the lifter to the load including
(according to the manufacturer’s instructions)
adjustments to the lifter, if any, to adapt it to various
sizes and kinds of loads.
3. Instruction in any special operations or precautions
that may be required.
4. Recognition of proper load configuration.
For example, preferred operation requires
an orderly pattern of stacking.
5. Before assuming responsibility for using the lifter,
an operator shall demonstrate his understanding
of the lifting procedure to the instructor. The instructorshould record notes of operator’s demonstrated ability
INSPECTION
The lifter shall be visually inspected by or under the direction
of an appointed person on a daily or weekly schedule depend-
ing on the nature of the lifter and the severity of the service.
Details to look for include but are not limited to:
1. Structural deformation.
2. Cracks in the structural frame, welds, hoist hook
attachment points, mechanically operating parts,
any attached slings, clevises and hooks. 3. Malfunctions during operation of a mechanically
operating lifter.
4. Loose covers, fasteners and stops.
5. Faulty operation of automatic hold
and release mechanisms.
6. Wear of hoist hooking points, load supporting
clevises, pins, slings, linkages and mechanical parts.
7. Missing nameplates and markings.
Contact CM Cady for replacements.
MAINTENANCE & REPAIRS
1. A preventive maintenance program should beestablished for each lifter by a qualified person based
on recommendations made by its manufacturer.
2. A qualified person should have responsibility for
repairs. Dated records and details of repairs and
parts replacement should be carefully maintained by
a qualified person, and copies kept in your possession.
3. Replacement parts shall be at least equivalent
to the original manufacturer’s specifications.
MODIFICATIONS OR REPAIRS PERFORMED ON YOUR LIFTING EQUIPMENT
WITHOUT PRIOR WRITTEN APPROVAL FROM CM CADY VOIDS YOUR WARRANTY.
REFER TO ASME STANDARDS FOR INFORMATION REGARDING THE LIABILITY
OF REPAIRED OR MODIFIED LIFTERS.
CARE & USE
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 66/67
CM CADY BELOW THE HOOK LIFTERS62
OPERATING PRACTICES
DO’s
1. The operator shall receive, read and understand the manufacturer’s instruction manual.
2. The operator shall watch carefully that the lifter is performing properly during the lifting procedure.
3. The operator shall know the standard crane hand signals.
4. The operator shall only respond to signals from an appointed person.
However, stop signals from anyone shall be obeyed.
5. The operator shall notify a designated person when he considers a load to be unsafe.
6. The operator shall inspect the lifter before using. Any defect observed shall be examined
by a qualified person to determine if it is a hazard.
DON’Ts
1. The operator shall not operate a malfunctioning lifter or one with an “out of service” tag attached.
2. The operator shall not use the lifter for any purpose(s) other than those designated
by the manufacturer’s instruction manual.
3. The operator shall not use a lifter when the capacity, weight or product safety labels are missing or are no longer legible.
4. No one shall make alterations or modifications to lifters without consulting the manufacturer.
5. No one shall obscure or paint over the manufacturer’s capacity, weight, or safety markings.
6. Loads shall not be lifted higher than necessary or be left suspended unattended.
7. The lifter shall not lift a load that is not properly balanced for safe lifting.
HANDLING THE LOAD
1. The lifter shall not be loaded in excess of its rated load.
2. The combined weight of the lifter and load shall not exceed the rated load of the crane or hoist.
3. The lifter shall be applied to the load in accordance with the manufacturer’s recommended operating procedure.
4. Lifter ropes and chains shall not be kinked, and multiple part lines shall not be twisted about each other.
5. The lifter shall not touch obstructions during load movement.
6. The lifter shall not be loaded with loose material that might fall during movement.
7. The operator or other personnel shall not place themselves or any part of their bodies beneath suspended loads.
8. The load or lifter shall not be slid on the floor or other surface.
9. The lifter shall not be used for loads for which it is not designed.
10. If suspended loads are moved manually, they shall be pushed, not pulled.
11. A preliminary lift of a few inches shall be made to establish that the load is stable.
12. All loads shall be accelerated and decelerated smoothly and slowly.
MODIFICATIONS OR REPAIRS PERFORMED ON YOUR LIFTING EQUIPMENT
WITHOUT PRIOR WRITTEN APPROVAL FROM CM CADY VOIDS YOUR WARRANTY.
REFER TO ASME STANDARDS FOR INFORMATION REGARDING THE LIABILITY
OF REPAIRED OR MODIFIED LIFTERS.
CARE & USE
7/23/2019 CM Cady Catalog
http://slidepdf.com/reader/full/cm-cady-catalog 67/67
KNOW HOW...KNOW WHY
Columbus McKinnon is a global leader in providing expertise
and training in the proper use and inspection of rigging and
overhead lifting equipment. With a range of comprehensive
programs and seminars conducted at venues throughout
North America, as well as on site at private companies and
industries, Columbus McKinnon courses include:
Hoist Maintenance Rigging Load Securement Safe Hoisting
Crane & Hoist Inspection Crane Operator Training Rigging Gear Inspection
Classes are available at our Niagara Training Center and the
state-of-the-art Hoist & Rigging Training Center of
Excellence in the Center for Occupational Health and
Automobile Manufacturing (COHAM) lab located at The Ohio
State University. The COHAM lab is a hands-on learning center
that allows attendees to understand how to properly use and
inspect overhead lifting equipment. This leading-edge training
program is designed to increase workplace productivity and
safety in an ergonomically friendly training environment.
In addition to the strong knowledge base exemplified by comprehensive training programs, Columbus
McKinnon is one of the only manufacturers supplying complete l ifting systems to satisfy unique materialhandling requirements of users in a variety of environments. From jib cranes and hoists to chain slings, clamps,
and related attachments; systems include products that are matched specifically to the lifting needs of theapplication. Products may also be modified in order to ensure that the proper system is in place for the job.
Whether your needs call for a single Lodestar®
electric chain hoist or a completely engineered system
to outfit your production facility, Columbus McKinnon provides the material handling products and
expertise you need to keep your workforce productive and safe.