clue machinery - september 2015 issue

M A C H I N E R Y

SEPTEMBER 2015Volume 30 Number 9Phone: 905-528-7765Fax: 905-917-0222

www.cluemachines.comemail: [email protected]

a TOS Varnsdorf company

TOS Trade Canada Inc.415 Industrial Dr.Milton, ON L9T 5A6http://www.tostrade.com

Tel: (905) 878 0888Fax: (905) 878 [email protected]

WHN-13 CNCStructured to guaranteehigh rigidity, reliabilityand accuracy.

Wide range of technologicalfunctions

www.tostrade.com

Starting at:$499,000 US

X - 3500 mm / 137.79”Y - 2500 mm / 98.42”Z - 1600 mm / 62.99”W - 800 mm / 31.49”

Spindle 130mm / 5.1”Speed 3000 rpm

Table 1800 x 2200 mm 70.8” x 86.6”

CNC Fanuc / Heidenhain

STEVENS MACHINERY SALES INC.NEW AND USED FABRICATING & METALWORKING MACHINERY SALES & SERVICES FOR OVER 38 YEARS

2 Royalcrest Road, Etobicoke (Toronto) ON, Canada M9V 2L5 Phone: 416-798-3611 Toll Free: 1-866-798-3611www.stevensmachine.com email: [email protected]

SERIES 4The press is totally pneumatic providing 6 tons of force and has a 45.7 cm / 18" throat depth which provides clearance for a variety of chassis configurations.It is designed to install self-clinching fasteners in size M2 / #0 thru M10 / 3/8" in steel, and sizes up to M12 / 1/2" in aluminum panels and circuit boards.

NEWSTANDARDFEATURES

Stroke Counter

Laser Pointer

Lockable Tool/Accessories Storage

Cabinet

1000 lbs. to 6 tons.

FEATURES AND BENEFITS

WITH AUTOMATIC FEED

® ®

tools and accessories storage.

™

The PENSERTER Series 4 press with automatic feed provides 6 tons of force and has a 45.7cm / 18" throat depth which provides clearance for a varietyof chasis configurations. It is designed to install self-clinching nuts, studs, and standoffs in sizes M2.5 to M6 / #2-56 to 1/4".

SERIES 4 SERIES 2000This automatic fastener-installation press system incorporates upgraded operating features and expansion capabilities topromote streamlined job productivity and quality. The press offers the idealtechnology to install all types of self-clinching fasteners rapidly, reliably, and permanently in thin metal plate.

FEATURES AND BENEFITSFEATURES AND BENEFITS

®® ® ®®®

STEVENS MACHINERY SALES INC.2 Royalcrest Road, Toronto ON, M9V 2L5

Phone: (416) 798-3611 Fax: (416) 798-8439Email: [email protected] Website: www.stevensmachines.com

PLEASE CALL, VISIT OR SEE MY WEBSITE!

LARGEST INVENTORY OF USED SMALL PUNCH PRESSES IN CANADA!

NEW MIDWEST DEBURRING MACHINE – 100% MADE IN THE U.S.A!

NEW GADE CNC HYDRAULIC PRESS BRAKES – MADE IN ITALY!

NEW COASTONE SERVO-ELECTRIC CNC PRESS BRAKES!

NEW PEMSERTER INSERT PRESSES!

AIR COMPRESSOR – 5 HP, VERT. 60 GAL. 550 V-$595.00AIR COMPRESSOR – 5 HP, HOR.80 GAL, 575V -$950.00BEADER-JORG, 21 G, 6” TH, ¾ HP, 575 V -$1,950.00BRAKE-ALLSTEEL, 10 FT X 70 TON, 575 V - $12,500.00BRAKE-HACO, 12 FT X 165 TON, 6 AXIS CNC-$54,500.00 BRAKE-WYSONG,12 FT X 140 TON,2 AXIS CNC-$37,500.00DEBURRING– 37”W,CEMCO,SCOTCHBRITE ROLL -$19,500.00DEBURRING– 37”W,CEMCO,SCOTCHBRITE ROLL -$19,500.00DEBURRING–37” WIDE, 1 HEAD, MIDWEST BELT-NEW - PORDEBURRING-37” WIDE, 2 HEAD, MIDWEST BELT/BELT- PORD-BUR-R-FALLS,SHEET EDGE, # 99, 115 V - $1,500.00D-BUR-R–FALLS, SHEET EDGE, # 121,115 V - $4,950.00DIE SHOES – GOOD QUANTITY, VARIOUS SIZES – P.O.R.DRILL PRESS–#3 MT,IBARMIA, G.H. PWR FDS -$3,950.00DRILL PRESS-#3 MT, IMA,GH HD,PWR FEEDS -$3,950.00DRILL-RADIAL-#3 MT, KING, 22”, 220/60/1 -$1,950.00DRILL-RADIAL-#3 MT, STANDARD, 24” ARM, -$3,950.00GRINDER-SURFACE-6”x12”,CHEVALIER,MANUAL -$2,500.00 INSERT PRESS-6 TON, PEMSERTER,#4,NEW-US.-$9,750.00INSERT PRESS-6 TON,PEMSERTER,#4AF,NEW-US$15,750.00INSERT PRESS – 6 TON, HAEGER,(AS IS) -$2,500.00 IRONWORKER-50 TON, HACO SHARK, 10 HP -$7,950.00LATHE-12” SW X 30” CC STANDARD MODERN -$3,950.00MILL-TURRET,R8,COMET, 50”x10”,3HP,575V -$3,500.00MILL-TURRET, R8, 11” x 49”,TOS,16 SPDS -$3,950.00MILL-TURRET, #40 MT, 12”x 54”, V.S, DRO -$4,950.00MILL-UNIVERSAL,DECKEL,FP2LB,3HP,550 VOLT-$7,950.00NOTCHER UNIT – C/W: 2 NOTCHERS, AIR/OIL -$3,750.00PANTOGRAPH, DECKEL, # G1L, 2D, 110 VOLT -$1,500.00PRESSES-KICK, 5 TON, ROPER 58,WHITNEY 68-$1,350.00PRESS - ARBOR– 3 TON, GREENERD, 6” TH. -$350.00PRESS – 1 TON, DENISON, HYDRAULIC, 110 V-$1,250.00PRESS – 2 TON, ALCECO, ¼” ST, 110 VOLT -$2,150.00PRESS – 2 TON, ALVA ALLEN, ¾” ST, 110 V -$2,150.00PRESS – 2 TON, BENCHMASTER, 1”ST, 110 V -$1,850.00PRESS – 3.5 TON, ALCECO, 12” TH, 110 V -$2,500.00PRESS – 4 TON, ALCECO, 1-1/4” ST, (8) -$2,250.00PRESS – 4 TON, AZIMUTH, 9”SH., 110 VOLT -$2,950.00

PRESS – 4.5 TON, FAMCO, 1-1/2” ST, (2) V-$2,150.00PRESS – 5 TON, ALVA ALLAN, 1-1/4” ST,(4) -$2,250.00PRESS – 5 TON, BENCHMASTER, 1” ST,,110 V -$2,250.00PRESS – 5 TON, ROUSSELLE, 1-1/4” ST, 110V-$2,450.00PRESS – 6 TON, AZIMUTH 1-1/4” ST, 575 V -$2,950.00PRESS – 6 TON, AZIMUTH, 1-1/4” ST, 110 V -$2,950.00PRESS – 10 TON, ROUSSELLE, 2” ST, 110 V -$2,950.00PRESS – 15 TON, ROUSSELLE, 2” ST, 110 V -$2,500.00PRESS – 15 TON, ROUSSELLE,2” ST, 18” TH -$3,500.00PRESS – 20 TON, BLOW, 2” ST, 1 HP, 575 V -$2,850.00PRESS – 25 TON, ROUSSELLE, 3” ST,AIR/MECH-$4,250.00PRESS – 33 TON, ALCECO, 2-1/2” ST, 575 V -$4,950.00PRESS,- 55 TON, BLOW, 4” ST, 5 HP, 550 V -$5,500.00ROLLING MILL, IRM, 2 HIGH, 6” W X 4” OD -$35,950.00ROLLS – PINCH, 36” X 22 G, 2” DIA, MANUAL - $750.00SAND BLAST CABINET, EMPIRE,S-20, 110 VOLT - $850.00SAND BLAST CABINET, EMPIRE, PF-3648 SRB-4-$3,950.00SANDER, STROKE, PROGRESS,8 FT,5 HP,550 V -$2,500.00SAW – ROLL-IN, E.R.MAIER, 10” X 12”,115 v-$2,995.00SAW–DBLE MITRE, PISTORIUS, 2 X 12” BLDES -$1,500.00SAW – VERT BAND, 20” TH, STARTRITE, VS -$3,950.00SAW – VERT BAND, 20”TH, T JAW, VS,WELDER -$3,950.00SHEAR – 48” X 16 G, GENERAL, FOOT, -$1,750.00SHEAR – 54” X 16 G, BARTH, FOOT, 19” GAP -$3,250.00SHEAR – 54” X 16 G, B & B, AIR, 19” GAP -$4,950.00SWAGGER-TORRINGTON,ROTARY,7/8”TUBE, 3 HP -$8,750.00TUBE BENDER-BLUE BOY, HORIZ, 3”, TOOLING -$7,500.00TUBE BENDER-DI-ACRO, # 2 MANUAL, TOOLS - $1,450.00TUBE BENDER-DI-ACRO STYLE, #2 MANUAL - $1,450.00TUBE CUT-OFF-CONTINENTAL, #6A,7-1/2” OD -$12,500.00UNCOILER – EGAN, 600 LB, 1/4 HP, 110 V -$1,650.00UNCOILER – EGAN, 600 LB, 1/4 HP, 110 V -$1,650.00UNCOILER – DURANT,1,000 LB, ½ HP,110 V - $1,250.00UNCOILER – MANUAL,5,000 LB, 24”W X 60”OD -$1,000.00WELDER – SPOT, 10 KVA, WELDOMATIC,12” TH -$2,950.00WELDER – SPOT, 25 KVA WELDOMATIC,7-1/2”TH-$4,500.00WELDER – PROJECTION,100 KVA,24” TH, 575 V-$5,950.00WELDER – PROJECTION, 75 KVA, 12” TH, 460V-$5,950.00

Clue September, 2015

CLUE, September 2015

63 Maplecrete Road, Concord, Ontario, L4K 1A5 Canada

Tel: (905) 669-7507 ! Fax: (905) 669-7512e-mail: [email protected] ! web: www.tradermachinery.com

BENDERS, HYDRAULIC2-1/2" SOCO, SB-63NCMP (2005), Hyd. Mandrel Type, Touch Screen PLC Ctl

5-1/2" ENERPAC, Hyd. Pipe bender, w/assisted tooling

BORING MILLS, VERT63"sw TOSHIBA, TMC-13(3), CNC, C-axis w/ Fanuc 32i

BRAKES, PRESS30 to 3000 Ton “NEW” ACCURPRESS Models CNC

35 Ton x 6’ DIACRO, 14-72, Hydra-Mechanical, Front Op. Manual Gauge

45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R, Crowning, Laser safety

50 Ton x 4’ “NEW” ACCURPRESS, SH5004, Hybrid, CNC Touch screen

55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis

60 Ton x 8’ ACCURPRESS, 7608, 2-Axis CNC, Light curtains

70 Ton x 10’ ALLSTEEL, CNC, Automec, Light curtains

70 Ton x 10’ ALLSTEEL, Hyd.

75 Ton x 10’ “NEW” ACCURPRESS, CNC

88 Ton x 8’ AMADA, FBDIII-8025NT (2000), AMNC-PC-7 Axis touch screen

93.5 Ton x 87" TRUMPF, Trubend 5085 (2011), 6-Axis, Like New

110 Ton x 10’ HACO, PPM 30100, CNC, 2-Axis ATL500

11ga x 10’ RAS, 73.30 (2002), Flexi-Bend, CNC Folder, System 5000

120 Ton x 8’ ALLSTEEL, CNC, Single-Axis Gauge


130 Ton x 14’ ACCURPRESS, ETS3000 (2005)

138 Ton x 10’ AMADA, FBDIII-1253NT (2001), AMNC-PC-7 Axis touch screen

140 Ton x 10’ WYSONG, CNC, Automec

143 Ton x 10’ AMADA, HDS-1303NT (2005), Servo Hyd. Hybrid CNC

175 Ton x 12' ACCURPRESS (1997), 2-Axis CNC


235 Ton x 12’ ACCURPRESS, Accell 523512 (2006), Mint!, Fully Loaded


DRILLS, COLUMN & BENCH1-3/8"cap “New” DRILLMASTER, Z5035, Geared Head

DRILLS, RADIAL3’ arm “New” TONE FAN, RD-900

3’ Arm SUNLIKE, 1500rpm, w/work table

9’arm SHENYANG, Box table

GRINDERS, CYLINDRICAL5"x 13" JONES & SHIPMAN, 1212E

GRINDERS, SURFACE, RECIPROC6" x 18" “New” KENT, KGS-200

8"x 18" FREJOTH, Automatic, Hyd.

12"x 24" OKAMOTO (2007), CNC, Fanuc 21MB

HONESSUNNEN, MBC-1804M & MBC-1802MR, Power Stroke, Horiz.

SUNNEN, MBB-1660K, Manual

SUNNEN, MBB-1650, Manual, Asst’d Tooling & Cabinet

IRONWORKERS55 Ton “NEW” MAKO, Universal, 5"x 5"x 3/8" angle

LASERS2000 Watt - 33 Ton AMADA, ApelioIII, 375V, Hyd Punch/Laser Machine

3000 Watt BYSTRONIC, Bystar 2512 (2002), 4’ x 10’

3200 Watt TRUMPF, Lasercell, 5-Axis

4000 Watt AMADA, FO3015 (2002), 5’ X 10’, w/Shuttle table

5000 Watt TRUMPF, L3050 (2005), 5’ x 10’

LATHES, ENGINE12" x 40" “New” MORTON, F1900-AEG (2001), Single Phase

18" x 60" “New” POWERTURN, 460

63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe

LATHES, N/C & CNCDMG, CTX 410 (2008), Live tool, Fanuc 32, Excellent!

OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2" Bar cap

HAAS, SL20T (2005)

MORI SEIKI, SL150S (1997)

MORI SEIKI, NL3000/1250 (2007), MSX850 II Control, C&Y Axis Milling, 10"Chk, Live holders

MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk, live holders, C&Y Mill cap

HARRISON, Alpha 400, 16"sw x 52"cc, Fanuc 2-1/8" bore

ROMI, M17 (2007) 17"x 43", Fanuc 21i, 8"Chk

TOOLMEX, TUR560MN-2000 (2012) 22"x 78.7", Siemens 840D, 16" Chk.

TOOLMEX, TUR630AMN-3000 (2008) 24.8"x 118", Siemens 840D, 16” Chk.

MACHINING CTRS, HORZTOYODA, FH100 (1989), Twin Pallet

MAZAK, H500/40, X-27.9" Y-18" Z-20.7", Mazatrol M32 control

OKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8", OSP7000

HAAS, EC-1600 (2006), X-64" Y40" Z-32", full 4th Axis, Mint!

MACHINING CTRS, VERTHAAS, VF1 (2005), X-20" Y-16" Z-20", 15,000 rpm

FADAL, VMC40, X-22" Y-16" Z-20", CNC 88 Ctrl

HAAS, VFOe (2000), X-30" Y-16" Z-20"

LAGUN, VMC 3516 (2000), X-30" Y-16" Z-20", Dynapath Delta CNC Control

MIKRON, HSM-600U (2006), X-31.4" Y-23.6" Z-19.7", 5-Axis high speed

MAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5 CNC, 13,000 rpm

MILLTRONICS, RH20 (2000), X-40" Y-20" Z-24", Centurion 6 control

DOOSAN, Doomac 80V (1997), X-78.74" Y-33.07" Z-31.5", Fanuc O-MC

MILLS, VERTICAL9" x 49" "NEW"MAGNUM-CUT, VM-2V, 3hp

10" x 54" "NEW" MAGNUM-CUT, VM-4V, 40 Taper, 5hp

12"x 51" TOS, FNK2 (1999), DRO, P/F, V/S

14"x 49" TOS, FGV32 (1997)

NOTCHING MACHINES5/32" x 8-7/8" x 8-7/8" (NEW) BOSCHERT, Hydraulic

1/4"x 8.6"x 8.6" EUROMAC, Hyd. Notcher w/Bending Attachment

PLASMA CUTTING MACHINES100 Amp MESSER MG (2000), 6’x 10’, Hy-Definition, CNC plasma, Metalmaster II

PRESSES, OBI80 Ton ROUSSELLE, 8B-48, 48” x 22” Bed, OBI

80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x 36"bed

PRESSES, STRAIGHT SIDE800 Ton BLOW, SC2-800-96-60 (1998), 96"x 60" bed, 16"stk, 20-40spm, Like New!

PUNCHES, SINGLE STATION25 Ton PIERCE-ALL

60 Ton FABMASTER (2011), Like new

PUNCHES, TURRET22 Ton TRUMPF, TC2020R (2011), 50"x 100", Like New

25 Ton TRUMPF, TC500/1300, 50"x 100"

33 Ton AMADA, Vipros 358 King II, 58 Stn, Fanuc 18P

33 Ton STRIPPIT, FC1250-30-1500, Fanuc OP, 2 A/I

ROLLS, ANGLE BENDING2"x 2"x 3/16" "NEW" (Demo) TAURING, SAF DS 50HV, Hydraulic

2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV

6"x 6"x 1/2" PULLMAX, Z43, Hydraulic, Pendant Control, Digital Readout

ROLLS, PLATE BENDING1.575"x 10" MG, Hyd, 4-Roll

1"x 10’ PULLMAX, PV7H, Hyd., 3-Roll Double Pinch

SANDERS24" TIMESAVER, Series 2100 (2008), Wet

SAWS, BAND, HORIZONTAL10"x 15" "NEW" ACRA, Speeder FHBS-250V

10.2" x 10.2" COSEN, C-260NC (2012), Fully automatic Horz, PLC Control

12"x 14" RAM, Semi-Auto

SHEARS, POWER SQUARING1/4"x 10’ "NEW" ACCURSHEAR, No.625010

1/4"x 10’ NIAGARA, IF-10-1/4II, Hydraulic

3/8"x 8’ ACCURSHEAR (1998), Hydraulic

MISCELLANEOUSBarfeeder SPACESAVER, 4’ SMW, Autoload 12.65

Barfeeds LNS, Servo S3 (2007), w/Remote pendant

Gundrill 3/4" x 30", ELDORADO

Insertion Press 8 Ton, HAEGER

Insertion Press 8 Ton, PEMSERTER, Series 2000 (2002), PLC control

Sinker EDM AGIETRON, Advance 2, X-11.8" Y-9.8" Z-9.8"

Spot Welder 20 KVA, SIP

Wire EDM, CNC AGIECUT, Classic 2S (2002), X-13.7" Y-9.8" Z-10"

Wire Machinery "NEW" METALEX, WT250, Wire Nibbler

NEW


WE BUY SINGLE MACHINES OR COMPLETE PLANTS

63 Maplecrete Rd.Concord, Ontario L4K 1A5Tel: (905) 669-7507Fax: (905) 669-7512www.tradermachinery.com

138 Ton x 10’, AMADA, FBDIII-1253NT,CNC Press Brake

93.5 Ton x 87”, TRUMPF, Trubend 5085, 2011, CNC Press Brake, Like New !

NEW Accupress CNC Hydraulic Press Brakesavailable from stock

TRUMPF, 5000 Watt, 5’ x 10’, 2005,Siemens 840D Control

22 Ton, TRUMPF, TC2020R, 2011,CNC Turret Punch, Like New !

88 Ton x 8’, AMADA, FBDIII-8025NT,CNC Press Brake


MACHINE TOOL SPECIALISTS

Authorized agent for Québec and the Maritime Provinces for:

Seguin Machinery Ltd. 1731 Rte Harwood, Vaudreuil-Dorion, Québec, J7V 8P2

Tél: 514 935-3531 Fax: 514-932-4459 Sans Frais 1-800-962-3531 www.seguinmach.com [email protected]

Used 2012 Feeler CNC Lathe

Scan for Generic Feeler Video


DUE TO OWNER RETIRING

SECROFT METAL PRODUCTS HVAC Sheet Metal Fabrication

350 Woodbridge Ave, Unit 17, Woodbridge (Toronto), Ontario, Canada

Auction: Wednesday September 9, 11:00 AM (ET)Inspection: Morning of Auction 9am – 11am

PINNACLE INDUSTRIAL AUTOMATION 5’x12’ Plasma Cutting TableFLAGLER Duct Flange Machine, Model DF2 35-300

LOCKFORMER Model 22 Quad RollformerEDWARDS 8’ x 1/8” Power Shear

SURPLUS TO THE ONGOING OPERATIONS

PNEUTECH ROUSSEAU CNC Turning & Machining

3121 Welham Road, Barrie (Toronto), Ontario, Canada

Auction: Wednesday September 16, 10:30 AM (ET)Inspection: Tuesday September 15, 9am - 4pm

(4) CNC Lathes by: OKUMA & MAZAK, Up To 3” Bore(3) Lathes by: TOS & CLAUSING, Up To 24” x 14’, Plus 6” Bore

CNC Vertical Machining Center(4) Mills & Radial Drills

SURPLUS TO THE ONGOING OPERATIONS

RJ CYR CO. INC. Heavy Duty Fabrication

5015 8th Concession, Maidstone (Windsor), Ontario, Canada

Online Only Auction – Bidding Ends Thurs. September 17, 1:00 PM (ET)Inspection: Wednesday September 16, 9am - 4pm

HEM SAW Model WF-130HA-DC PACIFIC 12’ x 400 Ton Press Brake

PROMECAM 12’ x 220 Ton Press Brake TOS Horizontal Boring Mill Model WH63

FREIGHTLINER Flat Bed TruckTALBERT Trailer

A U C T I O N S • L I Q U I D AT I O N S

F I N A N C I N G • A P P R A I S A L S

9 0 5 . 6 6 9 . 8 8 9 3i n f i n i t y a s s e t s . c o m

Like us at: facebook.com/Infinity-Asset-Solutions-Inc

Follow us at: twitter.com/InfinityAssets

PUBLIC AUCTIONS

Bid Live Onsite & Online Via

Bid Live Onsite & Online Via

Bid Online Only Via



Page 8 / Steel Marketplace / JULY 2007

�

• APPRAISALS • FINANCING • • TRADE-INS • TOOLING •

• SHIPPING • INSTALLATIONS • • TRAINING • SOFTWARE •

VISIT US AT:www.jordancraigmachinery.com

TO VIEW A COMPLETE LIST

Check out our website for Photos, Specifications and a more complete inventory atwww. jordancraigmachinery.com

JORDAN CRAIG MACHINERY INT’L LLC, P.O Box 737, New City, NY 10956Tel: 845-398-0073 [email protected]: 845-398-0074 www.jordancraigmachinery.com

22 TON TRUMPF, TC2020R BOSCH,TURRET PUNCH, 50” X 100”,MFG:2011APPROX. 3100 HOURS STOCK #10321

93.5 Ton, TRUMPF TRUBEND 5085, PRESS BRAKE, 6 AXIS BACK GAUGE,MFG:2011

STOCK #10322

TRUMPF TRULASER 3030 5 KW, LASER, 5’ X 10’ , MFG:2012 10000 LASER ON &

6000 BEAM ON, STOCK #10278

TRUMPF TRULASER 3040, LASER,4000 WATT, 80” X 160”, DUAL PALLET,

MFG:2011, STOCK #10260

33 TON, AMADA, PEGA 345Q, TURRET PUNCH, FANUC 04PC, 58STA., 2 A/I,MFG: 1993 STOCK #10283

143 Ton, AMADA, HDS-1303NT,PRESS BRAKE, AMNC-PC 8-AXIS,

MFG:2005, STOCK #10245

AMADA LC3015F1NT, LASER, 4000 WATT,5’ X 10’, AMS-3015 10 SHELF LOAD/UNLOAD

SYSTEM, MFG:2009 STOCK #10187

AMADA, LC1212A3XL, LASER, 2000 WATT,4’ X 8’, 17,000 HOURS, NEW TURBO BLOWER,

MFG:2004, STOCK #10175

4000 WATT AMADA FOM2 3015NT LASER W/AUTOMATIC NOZZLE CHANGER, 23,300 HRS.

MFG: 2012, STOCK #10297

AMADA,GEMINI FO-3015NT, LASER,4,000 WATT, 5’X10’,MFG:2007

APPROX:45,500 HOURS STOCK #10298

143 TON, AMADA HFE 1303,PRESS BRAKE, OPERATEUR II,

MFG:2005, STOCK #10324

72 TON, TRUMPF TRUBEND 3066,PRESS BRAKE, 4-AXIS, LOW HOURS,

MFG:2008 STOCK #10286

7040 Fir Tree Drive, Mississauga, ON L5S1K6, CanadaToronto Office: 905-676-9265 USA Office: 412-421-1211www.dipaolocnc.com [email protected]

USED MACHINERY

OTHER SERVICES» On-Site spindle taper grinding» Machine tool calibration and metrology» Mechanical, Electrical and CNC field service» Installations and plant moves» Spare parts including exchange programs» Authorized distributor for Heidenhain, Fagor, Fanuc FA, Siemens and Renishaw.» Certified Appraiser on staff» Way Grinding

Subscribe to our mailing list

Vertical LathesBERTHIEZ

SCHIESS

BULLARD

OKUMA + HOWA

62" table, 75" swing, Model TVM 125, 1997, Fanuc 15T, 95kw main spindle, Live tooling, tool and part probes, very heavy duty, Stock No. 407940” table, 55” swing, Model 14DKE100, updated electrics, fresh paint, Stock No. 4071Man-Au-Trol, 42” table, equipped with side head, from an aerospace facility, gently used, Stock No.4205ACT 2SP-V3, 10” chucks, twin spindle, Fanuc 0TT, 12 position turrets, 30HP spindles, Stock No. 4219

Horizontal Lathes“NEW”

“NEW”

MAZAK

RD&D

SAFOP

OKUMAHITACHI

MORI SEIKI

OKUMA+HOWA

SMTCL

DMG

DMG

20” x 60” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4” spindle bore, splash guard, steady rest, stock 403920” x 80” manual lathe, 10” 3 jaw chuck, 14” 4 jaw chuck, 4” spindle bore, splash guard, steady rest, 2 available, stock 4036 and 4037Slant Turn 40N-ATC Millcenter 1000, Fanuc Control64" x 170", sliding bed type gap lathe, 16" hole through spindle, GN10 CNC control, Stock No. 384963" x 236", C axis, live tooling on programmable turret, Siemens 840D CNC control, Stock No. 379115” x 36”, LU-15 CNC Lathe, 1995, Stock No. 358029” swing, Turret Lathe, 6.25” hole through, Stock No. 318327” x 35”, Model SL6, Fanuc 6T, 1981, equipped with tailstock, 12 station turret, Stock No. 417311” x 13” CNC Lathe, Model HJ-28, 18” swing, Fanuc 21iTB Control, 8 position turret, 2004. 2 Available. Stock 4156 & 4157HTC2050, 8”x20”, CNC turning center, FANUC control, tailstock, low hours, like new, 2010.CTX-310, 2006, 200mm turning diameter, 330mm swing, 51mm bar diameter, 3000 hrs, glass scales.CTX-410, 2008, 365mm turning diameter, 505mm swing, 66mm bar diameter, 1700 hours.

Surface & Blanchard GrindersFAVRETTO

ARTER

SHIBAURA

Model No. MG300 2T, Siemens CNC Control, 60” x 120” x 28”, two heads, reconditioned, you won’t find a nicer grinder on the market.Rotary Surface, Horizontal Spindle, Stock No. 3827

48”, Model No. KRT-8D, Blanchard Style, Stock No. 3684

MiscellaneousIEMCA

DANDREA

DO-ALL

AMADA

ARCHDALE

PRATT & WHITNEY

AMERICAN

PFAUTER

FLOOR PLATES

Bar feeder, 2.55" bar capacity, 3600mm bar length , Stock No. 4066

CNC facing head

Horizontal Bandsaw, Model C-916A, Stock No. 3466

Punch Grinder, Stock No. 3463

Granite Table, 150" x 150", Massive!, Stock No. 3418

Radial Drill, Stock No. 4211

Jig Grinder, Model No 20, Pratt and Whitney rotary table,

from an aerospace facility, gently used, Stock No.4215

Radial drill, 5’ arm, 17” column, 5MT spindle taper, power

quill travel, Stock No. 4237

Gear hobber, Model P900 Turbo, 36” max workpiece

diameter, 2.5 max DP, 24” axial travel, max hob 7-3/8” dia x

9” long, Auto hob shift, swing away tailstock, change gears,

Stock No. 4253

Various sizes

Machining CentresTOS

LEADWELL

BRIDGEPORT

BOSTOMATIC

12” x 51”, Model FV 25, FAGOR CNC control, box ways, priced to sell, Stock No. 3710

20” x 30”, Model MCV-760XL, FANUC 0 CNC Control, 20 position ATC, Stock No. 3453

20” x 40” CNC VMC, Model VMC1000/22, 6000 RPM, 40 taper, 1998, Stock 4159

32G Graphite VMC, 42K spindle, 4th axis.

Cylindrical GrindersSCHAUDT

B&S13” x 27”, Universal Heavy Duty, Stock No. 3826

10” x 48”, Brown & Sharp, Model 1048 Microstatic, Stock No.3825

Horizontal Boring MillsTOS

SCHARMANN

SUMMIT

WD130, 130mm spindle, Floor type boring mill, FAGOR 8055 CNC, 232” x 97” travel, 90” x 84” G&L table, linear scales, under power, Stock No. 4353

125mm spindle, Model Ecocut, Siemens 880 Ctrl, 3000 RPM, 50 HP spindle, built in CNC Facing head, 2 pallets, 50” x 63”

130mm Spindle, New in 1989, 79” x 72” table, good travels, facing head, pendant controls, good condition.

Milling MachinesHECKERT

DARBERT

16” x 63”, Model No. FSS 440 V1/2, Heavy Duty, Universal, Stock No. 3686

9” x 42”, Turret Style mill, Stock No. 3458

CMTSBooth #2019


Address: 2783 Portland Dr. Oakville ON L6H 6M6 Tel: 905-829-1579 Email: [email protected] Website: www.smtcl.com www.smtcl.ca

CY-K800B/3000 • Distance Between Centers: 118” • Swing Over Bed: 31.5” • Swing Over Cross Slide: 20.5” • Width of Bed: 23.6” • Spindle Bore: 5” • Spindle Speed: 22-1200rpm • Main Motor: 20HP

CY-K510n/1500, CYK510n/2000 • Distance Between Centers: 59” to 79” • Swing Over Bed: 19.7” • Swing Over Cross Slide: 11.4” • Width of Bed: 15.4” • Spindle Bore: 3.2” • Spindle Speed: 35 – 2500rpm • Main Motor: 10HP

New Arriving Teach-in CNC Lathes With Fagor Control: Fagor 8055i-TC Control, 2-axis drive motor, heat exchanger, full cover door, (10”/16”) 3 jaw chuck, 4-position turret, electric hand wheel, steady rest, follow rest, damping washer, absolute encoder

Special Deal For New Machineries!

New Arriving 3-Axis CNC Turning Center (SCHIESS - German Design): FANUC Oi TD control, α servo spindle motor with manual guide Horizontal 12 position DM servo turret, 1 axial live tool, 1 radial live tool and 10 standard tool holders

VIVA T2Sm/500 • Max Swing Diameter: 22” • Max Cutting Length: 19.3” • Spindle Hole Diameter: 3.5” • Spindle Speed Range: 30-4000 rpm • Main Motor Output Power: 15/18.5 kw

Canada Inc.

VIVA T4Cm/1000 • Max Swing Diameter: 28.3” • Max Cutting Length: 40” • Max Cutting Diameter: 20” • Spindle Speed Range: 30-3000 rpm • Main Motor Output Power: 22/30 kw


Latest Installation by FERRIC Machinery

FERRIC-ERMAK EPL 5 x 10ft HPR130XD plasma cutting center at Edalica Metals, Mississauga, ON

With this latest addition, Edalica Metals has now a full equipped metal shop.The FERRIC-ERMAK EPL plasma center allows cutting mild steel up to 1 1/2” and bevel cutting head.Equipped with the Hypertherm Edge Pro controller and through hole technology and nesting, allowing accurate part and hole cutting with a minimum of set up and quick turn around.For all cutting needs and information contact Ed at: [email protected]

www.ferr icmachinery.com

All FERRIC products are sold with installation and training.Local service by our local FERRIC team.

For more information on the FERRIC-ERMAK products visit:

FERRIC Machinery Inc.3980 Chadburn Cres, Mississauga, ONTel: 905-820-3232 [email protected]

Westside Service Ltd.122 Broxburn Blvd, Lethbridge, AB

Tel: 403-380-5047 [email protected]

PUNCHES • DIES • SHEAR BLADES • COUPLING NUTSALL IN STOCK!!

FABTEC Machine Tools Solutions Inc.790 Redwood Square, Unit 13, Oakville, ON L6L 6N3

1-877-322-8322 • Ph: 905-469-1586 • Fax: 905-469-3054Please Visit Our Website For More Info:

www.fabtec.ca

PUNCHES & DIES SHEAR BLADESPUNCHES, DIES andSHEAR BLADES for:

• EDWARDS• ENERPACK• GEKA• HOUGAN• KINGSLAND• MUBEA• PIRANHA• NITTO KHOKI• PEDDINGHAUS• SCOTCHMAN• WHITNEY• FABMASTER

DIE HOLDER

URETHANE STRIPPERS

MACHINE TOOL SOLUTIONS INC.F A B T E CI I

COUPLING NUTS

Trans-Canada Liquidations (TCL) has been in business since 1958 and offers the following services:

AUCTION SALES: We conduct auction sales right across Canada and have facilities in the USA. We will purchase any type of manufacturing company for cash or sell on a commission basis.APPRAISALS: We have certified appraisers on staff who can appraise all types of machinery and equipment; woodworking, printing, chemicals, fabricating, tool & die, construction, aircraft, foundries, etc...(in the strictest confidence).LIQUIDATIONS: We are able to conduct all types of Liquidation Sales, and can show you where more money can be realized. Complete liquidation is assured; our efficient organization enables us to handle numerous sales a week.MERGERS & ACQUISITIONS: There is a separate department for Mergers and Acquisitions, and we have been very successful in buying and selling both ongoing and bankrupt companies for clients. We represent various groups interested in purchasing manufacturing businesses.Our clients are Federal and Provincial Governments, Financial Institutions, Chartered Accountants, Trustees in Bankruptcies and Private Corporations.No proposition is too large to arouse our interest. The next time you have a plant with an uncertain future... get in touch with TCL for fast action.

TCL Asset Group Inc.

LET US WORK FOR YOU

4610 Dufferin Street, Suite 209Toronto, Ontario, Canada M3H 5S4www.ManagingYourAssets.com

Contact: NORM JACOBSTel: 416-736-1367 or Fax: 416-736-4159

Email: [email protected]

WE APPRAISE • WE LIQUIDATE • WE AUCTION


7055 Auburn Rd., Milton, ON L9T 7V9Ph: (905) 876-0890 Fax: (905) 876-1959

Email: [email protected]: www.walkermachinery.com

MAS VR8A98” Radial Drill

BORING MILLS, CNC, HORZ, FLOORUNION BFP 130 CNC, 5.12", (1994) 120"x 275", Heidenhain ctrlBORING MILLS, HORZ, TABLE4” TOS W100A, 44”x63”x63” trvls, 50 tpr, 4-axis DRO, new paint!, 19814” TOS W100A, 44”x63”x63” trvls, 50tpr, 4-axis DRO, new paint!, 19864“ TOS W100A, (2014) Remanufactured, 50 tpr spindle factory rebuilt to new tolerance, 5-axis Heidenhain DRO4” UNION CNC point to point, 44”x40”x63” trvls, TNC 135 Heidenhain control, very nice condition!4“ TOS W100A, 44"x 63"x 63" trvls, 4-axis DRO 49"x 49" rotary table, new 19964.3” TIGERCUT 110 CNC, 63”x 86” travels, Fanuc 31i control new 20124.3” TIGERCUT 110 CNC, 63"x 86" travels, Fagor CNC 1 degree index table, new 2005BORING MILLS, VERT72” G&L, CNC, 12 ATC, live tools, Refurbished 2009 Fanuc 21i ctlDRILLS, RADIALMAS VR 8A x 2500, 3" capGRINDER, SURFACE6”x16” OKAMOTO 618DX2, mag chuck, coolant, excellent condition!LATHES, ENGINETOS SN 400N, 16"x 80", (2003) 2-Axis, DROENTERPRISE, 20"x 120"TACCHI, 50"x 315", (1973) Steadies, follow rest, 4-jaw chuckPOREBA TCG 160, 63"x 393", As New!NILES, 70"x 315", 3-bedway design, pendant control on carriage heavy duty

LATHES, N/C & CNCMORI SEIKI SL-6 CNC, 50hp motor, Fanuc 6T control, 15"chk new 1981MACHINING CTRS, HORZNIIGATA HN 80 FC, 32"x 32" pallets, Fanuc 11m control, 6 pallet pool built in facing head and in/out spindle movement for boring mill applications, 120 ATC, new 1992MILLS, UNIVERSALTOS FGS 63T plus, 25"x 71", (2002) 3-Axis DRO, Variable speeds/feeds pendant ctl, 50 tpr, unv headZAYER 66MB, 28"x 80", 3-Axis DRO, Unv head, pendant ctl variable speeds/feedsMISCELLANEOUS50 plastic automotive skids, 45"x48" pallet - 4 way pick upCast Iron Floor Plates, 157" x 74" x 16" 2 AvailablePortable Drilling Unit, CLIMAX KM 3000Rotary Table, TOS ISO 16, 86"x 86", 60" Travel, 17 Ton, Rotary & Linear DRO

PAGE 30 CLUE, December 2013

AIR COMPRESSORS

JUN AIR 15 litre 120psi

QUINCY 5hp

DRILLS

BUFFALO

ALLEN drill press, 3ph

ARBOGA (G1304) Bench top drill

WESCO Mill/Drill press

HERBERT 15" 3ph

CINCINNATI BICKFORD 24"

FORK LIFT TRUCKS

TOYOTA 3000lb 3 wheel

TCM 5000 lb propane, 4 stge mast, side shift

NISSAN 5000lb propane, 3 stg mast, side shift

TCM 10000 lb Propane, 3stge mast

Assorted Pallet Trucks

HYSTER 15000 lb propane, 3stge mast, side

shift

GRINDERS

BALDOR 3/4hp pedestal grinder

BALDOR 2hp 10" double end ped. Grinder

THOR Pedestal grinder

JONES & SHIPMAN Surface Grinder 540,

550v, 3ph

BROWN & SHARPE 10"x 24" Cylindrical

LATHES

STANDARD MODERN 11"x 20"

CHIEN-YEH 14"x 36" 24" gap

SOUTHBEND 14"x 36", single phase

TOS (SV18RA) 15"x 60"

HARRISON (M400) 16"x 40"

VOEST 17"x 60"

MILLS

WESCO Mill/Drill Press

HONEYWELL Light curtains

FIRST (LC-20VSG) w/Readout

EXCELLO (602)

HASCO 9"x 42" R8 taper

FIRST (LC-20VSG) 10"x 51" 40 taper

TOS (FA3AV) 12"x 54" 40 taper

PRESSES

ARBOR (#2)

GREENERD (#3a) Arbor Press

JET (#3) Arbor Press AP3

ALGOMA 50T H Press, 575v, 3ph

BUFFALO 100T H press

ROLLS

B&B 36" x 18ga Hand Rolls

NIAGARA 4’ Initial Power Pinch rolls

SAWS, BAND, HORIZONTAL

CRAFTEX 10" table saw

GREENLEE (1346) 7"x 10" single phase

SAWS, BAND, VERTICAL

RIGID (MS1065LZA) 10" compound mitre saw

HOE JUN (HV400)

CLIPPER (BBC156) 14" Concrete saw

MAKITA 14" Chop saw, single phase

MEP (Rabbit 351) 14" Cold cut saw

DOALL 20"

WILSON 28" Vertical Woodworking band saw

GROB 36" band saw

WELDERS

MILLER (250P) Stick welder

AERCOLOGY’S WELDAIR (WA1000CP)

Smoke eater

THERMAL ARC (PAK 5Xr) Plasma cutter

MILLER (Coolmate 4) Water cooler

ARCWELD (G022263) 230/460/575

Smoke Eater, NEDERMAN

HOBART (300RVS) Mig Welder w/Feeder

LINCOLN (CV-300)

THERMALARC (250 Tigwave)

CANOX Arc Welder

L-TEC Heliarc 250hf plus squarewave

MILLER (Big 50) Diesel welder, 400 amp

MILLER (D302) 3+12 Diesel welder

MEMCO (Stick AC-225) single phase

MISCELLANEOUS

Assorted Transformers

Hydraulic Pump

Industrial Fan, VARY 4’ x 4’

MITUTOYO height gauges, assorted sizes

Wet Soda Blaster 38 x 41 x 38

Assorted Rotary Tables

Finger Brake, CHICAGO 5’

Mag. Lathe Chuck, ECLIPSE

Assorted Demagnetisers

HILTI (DXA40 driver) w/ XHN date stamp

attachment

Bead Rolling Machine, CMZ7, 114v, single ph.

Pressure Washer, PSC 600v, 3ph

Assorted Measuring Tools

Belt Sander, BROOK HANSEN 6"x 80"

Pipe Vise Stands, (2) PILOT (No.20)

Angle Plates

Torque Wrench, PROTO 600 ft/lbs

Collet sets

Assorted vises

Assorted Chain Hoists

Threading Caddy, RIGID

Magnets, 800-1000kg

Hardness Testers

Pedestal Buffer, CINCINATTI 14"

JET & CM 10T chain falls, 20’ lift

Bore Gauge, SUNNEN (Dial)

Tri Vise, RIGID

RIGID Tooling for threading machine

Phone: 905-634-8442 Fax: 905-681-69404280 Harvester Road, Unit 5 & 6, Burlington, Ontario, L7L 5Z5

www.paulmachinery.com


SYLVAIN TREMBLAY MACHINERY

Milling, EAST-LION, with C-TEC Ctrl, 12”x 60”, CNC 3 AXIS, $9,500

TARNOW Lathe, TUJ50MX2000,1995, Fully Equipped, DRO

Hyd. shear ELITE 1/4'' X 10',Mot. back gauge, secured, 2008

Kone 50TM (2 x 25TM) X 45', Mint Condition

CLEARANCE SALE, MUST BE SOLD

Hyd. plate roll DAVI, 3/16” X 10', 2002 Roto-Die 10', model 10,mint condition

Hyd. press brake ELITE, 175T X 13', CNC back gauge, tooling, secured, 2008

Lift truck KALMAR, P100BX,8900 Lbs, 174'', side shift

Contact: Sylvain Tremblay • Cell: (819) 314-4967 • [email protected]

ALL MACHINES

REVISED DOWN

MODERN TOOL BC LTD.

New & Used Equipment, Machinery Sales | Toll-Free: 1-800-717-1440

Modern Tool BC LTD. offers an extensive line-up of new and used machine tools, fabricating, sheet metal, and production machinery.

1385 Kingsway Avenue, Port Coquitlam, BC V3C 1S2 | (604) 472-1444 | Toll Free: 1-800-717-1440

DURMA AD-R37175 CNC Hydraulic Press Brake

HYD-MECH S-20A IIIAutomatic Band-Saw

Need your equipment serviced? Our service department is available from Monday to Friday 9am to 5pm

On the web @ www.moderntoolbc.comFollow us on Twitter @ModernToolBC

Service & Parts Sales | Toll-Free: 1-800-717-1440

SCOTCHMAN 6509-24MHydraulic Ironworker

DURMA PBH-180Profile Bending Machine


B1804 BENDERS, HYDRAULIC

5-1/2" ENERPAC, , Hyd. Pipe bender, w/assisted tooling, (Trader

Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)

See Page 4

B6985 BRAKES, HAND

16ga X 10’ BROWN & BOGGS, , $3,000, (Machine Solutions

Inc. Tel: 416-220-5910 See Page 3

B7000 BRAKES, PRESS

15 Ton x 4’ CHICAGO, , Mechanical, $1,900, (Machine Solutions

Inc. Tel: 416-220-5910 See Page 3

20 Ton x 4’ ALLSTEEL, , Hydraulic, $5,500, (Machine Solutions

Inc. Tel: 416-220-5910 See Page 3

35 Ton x 6’ DIACRO, 14-72, Hydra-Mechanical, Front Op.

Manual Gauge, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

35 Ton x 6’ TRI-ACRO, 35-6 (1993), Hydra-Mechanical, Hurco

5C, Ref# 10204, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R,

Crowning, Laser safety, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

55 Ton AMADA, RG 50 (1996), NC 9EXII, Ref# 10300, (Jordan

Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 8

55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis, (Trader


See Page 4

55 Ton x 82.1" AMADA, RG5020LD (2004), Up-Acting w/LD

2-Axis CNC control, Ref# 10293, (Jordan Craig Machinery Int’l

Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

60 Ton x 8’ ACCURPRESS, 7608, 2-Axis CNC, Light curtains,

(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)

See Page 4

70 Ton x 10’ ALLSTEEL, , CNC, Automec, Light curtains, (Trader


See Page 4

70 Ton x 10’ ALLSTEEL, , Hyd., (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

72 Ton TRUMPF, Trubend 3066 (2008), 4-Axis, 2700 Hours,

Ref# 10286, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

75 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader Machinery


88 Ton AMADA, HDS8025NT (2008), Ref# 10244, (Jordan Craig

Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)

See Page 8

88 Ton AMADA, RG80 (2000), NC 9EXII 3-axis, Ref# 10033,

(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 8

88 Ton AMADA, Astro 100M (2001), FBDIII-8025, Sold NEW in

2004, Ref# 10192, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

88 Ton x 8’ AMADA, FBDIII-8025NT (2000), AMNC-PC-7 Axis

touch screen, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

93.5 Ton x 87" TRUMPF, Trubend 5085 (2011), 6-Axis, Like New,


See Page 4

93.5 Ton TRUMPF, Trubend 5085 (2011), 6-Axis BG, Ref#

10322, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 8

95 Ton TRUMPF, Trumabend V85 (2000), Delem DA65 CNC,

Prog. Z1,Z2, Ref# 9975, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

99 Ton DURMA, AD-E 3090 (2007), Delem DA-51 2-Axis, Ref#


Fax: 845-398-0074) See Page 8

110 Ton AMADA, FBDIII 1030NT (2000), 122", Ref# 10112,


Fax: 845-398-0074) See Page 8

110 Ton AMADA, HFE 1003S/7 (2000), CNC, 122", Ref# 10144,


Fax: 845-398-0074) See Page 8

110 Ton AMADA, Astro 100NT (2004), HDS1030, Robotic

bending cell, Ref# 10203, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

110 Ton x 8’-6’ “NEW” FERRIC, , Ferric PB Pro Falcon

2600x100, XR Back gauge, CNC crown, 2D graphic, (Ferric


See Page 24

110 Ton x 10’ HACO, PPM 30100, CNC, 2-Axis ATL500, (Trader


See Page 4

110 Ton x 13.5’ GASPARINI, EFB 4100x105, XR Backgauge,

CNC Crown, DNC angel prog., (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 24

11ga x 10’ RAS, 73.30 (2002), Flexi-Bend, CNC Folder, System

5000, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

120 Ton x 12’ ALLSTEEL, , Hurco CNC, $18,000, (Machine

Solutions Inc. Tel: 416-220-5910 See Page 3



137 Ton AMADA, HFB1254/5, NEW 1995, Operateur CNC, 165",


Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

138 Ton AMADA, FBD1253NT (2002), Up-Acting CNC, Ref#


Fax: 845-398-0074) See Page 8

138 Ton x 10’ AMADA, FBDIII-1253NT (2001), AMNC-PC-7 Axis

touch screen, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

143 Ton AMADA, HFE 1303 (2005), Operateur II, Ref# 10324,


Fax: 845-398-0074) See Page 8

143 Ton AMADA, HDS-1303NT (2005), AMNC-PC 8-Axis, Ref#


Fax: 845-398-0074) See Page 8

143 Ton x 10’ AMADA, HDS-1303NT (2005), Servo Hyd. Hybrid

CNC, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

144 Ton TRUMPF, V130X (2002), 6-axis BG, EX-Stroke

Clamping, Crowning, ACB, Ref# 9976, (Jordan Craig


See Page 8

148 Ton x 10’ BYSTRONIC, 3100 x 130, 6 axes back gauge,

Hyd clamping, with tooling, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 24

150 Ton x 10’ “NEW” FERRIC, Speed Bend 3100x135, XRZ1Z2

back gaug, CNC crown, 2-3D prog. off line software, (Ferric


See Page 24

160 Ton x 13.5’ NISSHINBO, 4100 x 150, XRZ1Z2, CNC crown,

2D graphic control, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 24

165 Ton x 12’ HACO, ERM 36150, X-39’, Man Crown, BC55 2D

graphic, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 24

170 Ton x 12’ VERSON, , Mechanical, (Machine Solutions Inc.

Tel: 416-220-5910 See Page 3

PAGE 16 CLUE, August, 2015

CLASSIFIED - LISTING YOUR MACHINERY AND EQUIPMENT TODAY

LEADS TO SUCCESSFUL SALES TOMORROW

Don't Delay! Phone: (905) 528-7765 Fax: (905) 917-0222

CNC MACHINES • FABRICATING EQUIPMENT • PRINTING PRESSES, BINDERY EQUIPMENT • CONSTRUCTION EQUIPMENT • BAKERY EQUIPMENT • NUT &

BOLT MACHINERY • KNITTING MILLS • CONFECTIONARY & FOOD EQUIPMENT • RUBBER MILLS • CHEMICAL & PAINT MIXING EQUIPMENT • CAN MAKING

MACHINERY • PHARMACEUTICAL MACHINERY • WIRE MACHINERY • AUTOMOTIVE PRODUCTION MACHINERY • ANY LARGE QUANTITY OF STEEL

INVENTORIES, ETC.

Please state price, location & conditionWe will purchase single machines

or complete plants

SEND YOUR INFORMATION TO: NORM JACOBSTEL: 416-736-1367 or FAX: 416-736-4159EMAIL: [email protected]

TCL Asset Group Inc.

WE CAN USE YOUR SURPLUS EQUIPMENT


CLUE, April 2014 PAGE 17

B7000 BRAKES, PRESS L0850 LASERS

175 Ton x 12’ ACCURPRESS, (1997), 2-Axis CNC, (Trader


See Page 4

175 Ton x 12’ ACCURPRESS, Advantage 717512 (2004),

ETS3000 3-Axis, Ref# 10273, (Jordan Craig Machinery Int’l


175 Ton x 12’ “NEW” TOSKAR, , CNC 4-axis Touch graphic

Manual crown tooling, quick release clamping, (Machine


187 Ton AMADA, HFE-1704S/7 (2004), Operateur 7-Axis CNC,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

190 Ton TRUMPF, V170 (2000), Delem, Prog. Z1, Z2, Crowning,

Clamping, Ref# 10013, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

193 Ton x 10’ “NEW” FERRIC, , PB Pro Falcon 3100x175, XR

Back gauge, CNC crown, 2D graphic, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 24



Tel: 877-337-7424, Fax: 905-820-3234) See Page 24





Tel: 877-337-7424, Fax: 905-820-3234) See Page 24

245 Ton x 14’ HACO, ERM 42225, X back gauge Man Crown,

BC40 Angle prog., (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 24



257 Ton TRUMPF, Trumabend V230 (2003), Delem DA69 6-axis,

Clamping, Crowning, ACB, Ref# 9977, (Jordan Craig


See Page 8

257 Ton TRUMPF, Trumabend V230X (2003), Delem DA69

6-axis, Clamping, Crowning, ACB, Ref# 9980, (Jordan Craig


See Page 8


Back Gauge, CNC Crown, 2D graphic, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 24

40-400 Ton x 5-16’ “NEW” TOSKAR, , Hydraulic, (Machine


400 Ton x 17’ CINCINNATI, , Mechanical, (Machine Solutions

Inc. Tel: 416-220-5910 See Page 3

600 Ton x 16’ ALLSTEEL, , Hydraulic, $27,000, (Machine


1750 Ton PACIFIC, Fabri-K 1750-40/36 (2007), Cybelec 8805,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

D5700 DRILLS, RADIAL

3’ Arm SUNLIKE, , 1500rpm, w/work table, (Trader Machinery


64" x 5MT TOS, VR5, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 23

F5006 FURNACES

Heat Treating , New & Reconditioned, Powered by Electric, Gas,

Oil, Propane, for all purposes, (Park Thermal International

Tel: 905-877-5254, Fax: 905-877-6205)

G8025 GRINDERS, SURFACE, RECIPROC

8"x 18" FREJOTH, , Automatic, Hyd., (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

8"x 20" JONES & SHIPMAN, , $1,900, (Machine Solutions Inc.

Tel: 416-220-5910 See Page 3

8"x 24" ENCO, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 23

8"x 24" TOS, BRH20, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 23

G9030 GRINDERS, MISCELLANEOUS

10"x 25" TOS, BU28-630, Cylindrical, (Powermaster Machinery

Ltd Tel: 905-624-9327, Fax: 905-624-8591) See Page 23

H6004 HONES

SUNNEN, , MBC-1804M & MBC-1802MR, Power Stroke, Horiz.,


See Page 4

SUNNEN, MBB-1660K, Manual, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

SUNNEN, MBB-1650, Manual, Asst’d Tooling & Cabinet, (Trader


See Page 4

I6200 IRONWORKERS

50 Ton “NEW” FERRIC, HIW 45, Single Operator, 5 Stations,

(Ferric Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)

See Page 24

60 Ton “NEW” FERRIC, HIW 60 DC, Dual operator, 5 stations,


See Page 24

65 Ton “NEW” FERRIC, HIW 60, Single operator, 5 stations,


See Page 24

75 Ton KINGSLAND, 75XS, Dual operator, 5 stations, (Ferric


See Page 24



See Page 24



See Page 24



See Page 24

55 Ton to 120 Ton “NEW” DURMA, , (Machine Solutions Inc.

Tel: 416-220-5910 See Page 3

100 Ton OMERA, , Mechanical, $3,900, (Machine Solutions Inc.

Tel: 416-220-5910 See Page 3

L0850 LASERS

WUHAN, Golden Laser, New 2012, 650 Watts Yag lamp laser,

Gantry design, Never used, (Machinerie Gilles Lupien

Tel: 819-478-5266, Fax: 819-478-5266) See

1500 Watt AMADA, LC1212XL (1995), 4’ x 8’, Rebuilt 2012, Ref#


Fax: 845-398-0074) See Page 8

2000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff

control, Lantek Expert, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 24

2000 Watt AMADA, Pulsar LC2415XLA3 (2000), 61"x 198"

w/REPO, Ref# 10305, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

2000 Watt AMADA, LC1212A3XL (2004), 4’ x 8’, 17,000 hours,

New turbo blower, Ref# 10175, (Jordan Craig Machinery Int’l


Priced to Move

Installed New 2013, only 250 working hours. (Shop Closed) • Like New Condition • 650 Watts Yag Lamp Pump Laser • Complete software for Flat sheet and Tube • Auto sensing cutting head • Gantry desing •

with fixed beam path • Exaust fan, Scrap parts • conveyor • 17’’ LCD Display / 5’’ LCD Display/ Move

Handle • 128 M, memory / USB / Ethernet / Soft Dog Key

Paid new : 105K, Low Price at : $49,500.00

Contact: Gilles LupienEmail: [email protected]: 819-478-5266

Cell: 819-473-2902

Website: www.machinerygl.com

4 Axis, Dual Chuck, Dual Turret Turning Center Model : LFS15-2SP

Year 1999 Only 7,875 Hr. Cutting time.Control : OSP U100L

Chuck Size : 8’’, Spindle Nose :ASA, A2-615HP.

4,500 RPM.

Low Price at : $54,500.00

(Only 12,781 Hr. Cutting Time.)Model : MX-45 VAE

Control : OSP 7000M (4 Axis)12,000 rpm

Table : 40’’X20’’XYZ : 30’’X19’’X18’’

Inc : Coolant trough, Chiller, Chip Conv.,Full enclosed guards, Lock doors device.

Low Price at : $37,500.00

Wuhan Golden Laser Okuma Robusturn Twin Spindle Okuma VMC, Pallet Changer

Clue September, 2015 Page 17

L0850 LASERS L6135 LATHES, N/C & CNC

PAGE 18 CLUE, April 2014

2000 Watt SALVAGNINI, L3 Fiber (2011), 5’x 10’, Ref# 10255,


Fax: 845-398-0074) See Page 8

2000 Watt TRUMPF, L2510 (2005), Load/Unload Cell, Ref#


Fax: 845-398-0074) See Page 8

2KW TRUMPF, L2030 (2007), 4’x 10’, Low hours, Ref# 10237,


Fax: 845-398-0074) See Page 8



Tel: 877-337-7424, Fax: 905-820-3234) See Page 24

3000 Watt TRUMPF, L2530 (1999), 4’x 8’, Siemens, 9483 Beam

on hours, Ref# 9753, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

3000 Watt BYSTRONIC, BySprint Fiber 3015, Installed New:

2013, Ref# 10253, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

3200 Watt TRUMPF, TCL-3030 (2001), 5’x 10’, Ref# 9914,


Fax: 845-398-0074) See Page 8

3500 Watt TANAKA, TF-3500B (1996), 8’ x 95’, Fanuc 16L, Ref#


Fax: 845-398-0074) See Page 8



Tel: 877-337-7424, Fax: 905-820-3234) See Page 24

4000 Watt AMADA, Gemini F0-3015NT (2006), 61"x 122.8",

Approx. 25,900 hrs, Ref# 10301, (Jordan Craig Machinery Int’l


4000 Watt AMADA, FOM2 3015NT (2012), w/ Automatic nozzle

changer, 23,300 hrs, Ref# 10297, (Jordan Craig Machinery

Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

4000 Watt AMADA, Gemini F0-3015NT (2007), CNC

w/Automatic Nozzle Changer, Ref# 10298, (Jordan Craig


See Page 8

4000 Watt AMADA, FOM2 3015NT (2011), w/Automatic nozzle

changer, approx. 31,500hrs, Ref# 10299, (Jordan Craig


See Page 8

4000 Watt AMADA, LC3015F1NT (2009), 5’x 10’, AMS-3015 10

Shelf Load/Unload System, Ref# 10187, (Jordan Craig


See Page 8

4000 Watt AMADA, Gemini FO-3015NT (2007), 5’x 10’, Approx.

40,000hrs, Ref# 10249, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

4000 Watt AMADA, Theta (2008), 5-AXIS, LC3015CII, No rotary

chk, Ref# 10248, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

4000 Watt TRUMPF, Trulaser 3040 (2011), 80"x 160", Dual

Pallet, Ref# 10260, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

4000 Watt AMADA, Gemini FO4020 (2003), 80"x 160", Dual

Pallet, Ref# 10262, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

4000 Watt MAZAK, Hypergear 510 (2006), Installed New:2008,

Less than 8500hrs, Ref# 9707, (Jordan Craig Machinery Int’l


4000 Watt AMADA, Pulsar 2415NTA4 (2010), 8,500hrs, Ref#


Fax: 845-398-0074) See Page 8

4000 Watt AMADA, FO MII RI 3015 (2012), 5’x 10’ Rotary Index,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

5000 Watt “NEW” FERRIC, Fibermak, 78 X 160, Beckhoff


Tel: 877-337-7424, Fax: 905-820-3234) See Page 24

5000 Watt TRUMPF, L3050 (2005), 5’ x 10’, (Trader Machinery


5000 Watt TRUMPF, Trulaser L3030 (2012), 5’x 10’, 10000

Laser On & 6000 Beam On, Ref# 10278, (Jordan Craig


See Page 8

5000 Watt HK, FL-3015 (2011), 5’x 10’, Ref# 10259, (Jordan


Fax: 845-398-0074) See Page 8

5200 Watt BYSTRONIC, Byspeed 3015 (2005), 5’x 10’, Ref#


Fax: 845-398-0074) See Page 8

6KW AMADA, LC-3015F1NT (2011), 5’x 10’, Dual Pallet, Ref#


Fax: 845-398-0074) See Page 8

MAZAK, FMS-A48-12 (2004), 6 Shelf loader, Ref# 9720, (Jordan


Fax: 845-398-0074) See Page 8

L2150 LATHES, CNC

OKUMA ROBUSTURN, LFS15-2SP (1999), Twin Spindle, 4-axis,

Dual chk, Dual Turret turning center, $54,500, (Machinerie

Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)

See Page 17

L3000 LATHES, ENGINE

12"x 36" LOGAN (by Powermatic), 2557 VLH, Variable speed, 3

& 4 jaw chucks, collets., (Brighton Machinery Sales Inc

Tel: 519-485-7089, Fax: 519-485-7368)

14"x 40" TOS, SN32, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 23

16"x 40" ACRA, , DRO, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 23

16"x 40" TOS, SN40C, DRO, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 23

17"x 60" COLCHESTER, Mascot, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 23

18" x 60" “New” POWERTURN, 460, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

18"x 80" DARBERT, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 23

22"x 60" CHIEN YEH, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 23


Tel: 905-624-9327, Fax: 905-624-8591) See Page 23

SHENYANG, CW 6263B, 26" swing x 120" centers, Mint cond.,

(Machinerie Gilles Lupien Tel: 819-478-5266,

Fax: 819-478-5266) See Page 17


Tel: 905-624-9327, Fax: 905-624-8591) See Page 23

63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe, (Trader


See Page 4

L6135 LATHES, N/C & CNC

OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2"

Bar cap, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

1-589 Middle�eld Rd, Toronto ON M1V 4Y6Phone: 416-291-9499 Fax: 416-291-4990Email: [email protected]: www.compumachine.ca

Toshiba BTD 9R CNC Boring Mill with Rotary table

Great capacity low price20hp, Vert Travel Of Headstock, Y-39.4",X-48", Spindle Travel, W-20" SaddleTravel Z-35.4", Built-In Pwr Rotary Table35.4" x 41.3", Capacity 5,510.lb

Toshiba BTD 11B P4 CNC Boring Mill Plain Table

Big Capacity 98" table low priceX-98”, Y-59”, Z-62”, W-24”, Table size 98”x 59”, Table load Capacity 17,000lb, Spindle diameter 4.3”, Spindle speeds 1600rpm, Spindle motor 20/30hp

Toshiba TMC 13-3 CNC, VBM w/Live spindle and C axis

Table Diameter: 49.2", Max Swing: 63", Max. Turning Dia: 63", Max Turning Height: 49.2", Max Table load – turning – (milling) 22,000 LBS (15,000LBS), Table RPM 3~250, Table Motor 40/50 HP, Cross Rail Stroke (4) positions 19.7”- 49.2”. ATC 24 Live spindle:, 20 HP (1,500 RPM)New Fanuc 0i-TD CNC Control with warranty.TOSHIBA SALE

CNC Machining Centers2001 Deckel Maho Gildemeister (DMG) DMU-70 Evolution 5-Axis

VMC with Heidenhain TNC 430 Control1990 Mazak VQC 15/40 with Mazatrol M32, Table 16” X 35”, X-22”,

Y-16.1”, Z-15”, 6000rpm2000 Daewoo Mynx 500 Fanuc 21-M Control, Table size 49”x20”

X-40”, Y-20”, Z-20” 6000rpm ATC 241992 Hermle UWF 851 H CNC Univ Milling Mach, Heidenhain 415

CNC Control, X-600mm Y-450mm Z-400mm, 20-4500rpm1993 Enshu 500H CNC Horiz Mach Center Fanuc 16-M Ctrl, Two

Pallet auto changer 20” pallets, X-28” Y-25.6” Z-23.6”, 20-6000rpmCNC Lathes1981 VDF Boehringer 800 3m centers Fanuc 6T Control1981 VDF Boehringer 820 3m centers Fanuc 6T Control1983 VDF Boehringer 800 3m centers Fanuc 0T ControlCNC Boring Mills1996 Toshiba BTD 110 R16 2m x axis, 1500mm Y axis. Rotary

table 55”x63”, ATC 38 Tosnuc 888 ControlBoring Mills2001 Tos W100A Horizontal with Heidenhain 3 axis DRO

Union Floor Type Horizontal, BFP 125 Accurite 3 axis DRO Spindle Diameter 5”, 12 Ton Rotary table and floor platesEngine lathesMerli Clover 24” swing, 80” centersGiana Torgim. 32” swing, 140” centers 15” chuckChien Yeh 14” swing 60” centers 8” chuckMilling machines Dah- Lih: DL-VHRU-G2, 10” x 48” table, 40 taper (vert. & horiz.),

133-2160 rpm (belt)- vert., 50- 750 rpm (belt)- horiz.. c/w x- axis power feedPresses60 Ton Hydraulic H frame pressFork liftsElectric Lift- Truck: Clark; E-C 500, 5000 lb. capacity, 188” lift. c/w battery charger.GrindersKarstens CNC Universal Cylindrical Grinder, 12” magnetic chuck,

24” swing, 60” centers, Universal Swivel grinding wheel, George Karstens CNC Control


L6135 LATHES, N/C & CNC P2135 PLASMA CUTTING MACHINES

HAAS, SL20T (2005), (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

MORI SEIKI, SL150S (1997), (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

MORI SEIKI, NL3000/1250 (2007), MSX850 II Control, C&YAxis

Milling, 10"Chk, Live holders, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk, live

holders, C&Y Mill cap, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

HARRISON, Alpha 400, 16"sw x 52"cc, Fanuc 2-1/8" bore,


See Page 4

12"x 40" HYUNDAI, HIT-30-S (1995), Seimens 840C, Over Bed

20", Mint cond., (Machinerie Gilles Lupien Tel: 819-478-5266,

Fax: 819-478-5266) See Page 17

22"x 78.7" TOOLMEX, TUR560MN-2000 (2012), Siemens 840D,

16" Chk., (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

24.8"x 118" TOOLMEX, TUR630AMN-3000 (2008), Siemens

840D, 16” Chk., (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

M0130 MACHINING CTRS, HORZ

OKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8", OSP7000,


See Page 4

HAAS, EC-1600 (2006), X-64" Y40" Z-32", full 4th Axis, Mint!,


See Page 4

M0185 MACHINING CTRS, VERT

HAAS, VF1 (2005), X-20" Y-16" Z-20", 15,000 rpm, (Trader


See Page 4

LAGUN, VMC 3516 (2000), X-30" Y-16" Z-20", Dynapath Delta

CNC Control, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

OKUMA, MX-45 VAE, X-30" Y-19" Z-18", Table 40"x 20", Pallet

changer, 4-axis, $37,500, (Machinerie Gilles Lupien

Tel: 819-478-5266, Fax: 819-478-5266) See Page 17

TONGTAI SEIKI, TMV-850A (2007), X-33.5" Y19.7" Z-20.9", Ref#


Fax: 845-398-0074) See Page 8

MAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5

CNC, 13,000 rpm, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

DOOSAN, Doomac 80V (1997), X-78.74" Y-33.07" Z-31.5",

Fanuc O-MC, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

M0850 MEASURING MACHINES

SHEFFIELD, Cordax D-28 (2009), Discovery III, Ref# 9855,


Fax: 845-398-0074) See Page 8

M1550 MILLS, CNC

MIKRON, WF31C, Fanuc OM, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 23

SUPERMAX, , Knee type Centroid CNC, (Powermaster

Machinery Ltd Tel: 905-624-9327, Fax: 905-624-8591)

See Page 23

JAFO, , Ram Type, Heidenhain, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 23

M1659 MILLS, UNIVERSAL

10"x 50" TECHLEADER, , 5hp, 2 axis read-out, powerfeed, $5,

500, (Machine Solutions Inc. Tel: 416-220-5910 See Page 3

10"x 50" FIRST, , Horz/Vert, DRO, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 23

M2824 MILLS, VERTICAL

14"x 49" TOS, FGV32 (1997), (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

N5230 NOTCHING MACHINES

(NEW) BOSCHERT, , 5/32" x 8-7/8" x 8-7/8", Hydraulic, (Trader


See Page 4

1/4"x 8.6"x 8.6" EUROMAC, , Hyd. Notcher w/Bending

Attachment, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

1/4" x 8.6"sq “NEW” FERRIC, , variable angle, (Ferric


See Page 24

O7397 OVENS

New & Reconditioned , Powered by Electric, Gas, Oil, Propane,

(Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

P2135 PLASMA CUTTING MACHINES

100 Amp MESSER MG, (2000), 6’x 10’, Hy-Definition, CNC

plasma, Metalmaster II, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

CLUE, April 2014 PAGE 19

British Columbia

Modern Tool (BC) Ltd, Port Coquitlam (Pam).......................................... 604-472-1444............604-472-1455............15

Manitoba

Empire Machinery & Tools, Winnipeg (Rick) ........................................... 800-665-8089............204-779-7796..............9

Ontario

Brighton Machinery Sales Inc, Ingersoll (Brian) ...................................... 519-485-7089............519-485-7368............16

Compumachine Canada, Toronto (Peter)................................................ 416-291-9499............416-291-4990............18

DiPaolo Machine Tools Ltd., Mississauga (Nelson).................................905-676-9265............905-676-9436............10

Fabtec Machine Tool Solutions Inc, Oakville (Raj) ..................................905-469-1586............905-469-3054............13

Ferric Machinery Inc, Mississauga (Koen) .............................................. 877-337-7424............905-820-3234............24

Havlik Int’l Machinery, Cambridge (John)................................................ 519-624-6240............519-624-4119............22

Hilco Asset Sales Canada, Toronto (Bruce) ............................................ 416-252-1955............416-251-1955............20

Infinity Assets Solutions, Concord (Leslie) .............................................. 905-669-8893............905-669-7512..............7

L S Walker Machine Tools Inc, Milton (Chris) .......................................... 905-876-0890............905-876-1959............14

Machine Solutions Inc., Guelph (Andrew) ............................................... 416-220-5910................................................ 3

Park Thermal International, Georgetown (Sales) ....................................905-877-5254............905-877-6205............19

Paul Machinery, Burlington (Paul) ........................................................... 905-634-8442............905-681-6940............14

Powermaster Machinery Ltd, Mississauga (Peter) ..................................905-624-9327............905-624-8591............23

S K Braly Machinery Inc, Mississauga (Steve)........................................ 905-793-8080............905-793-2190............21

SMTCL Canada Inc., Oakville (Merry) .................................................... 905-829-1579............905-829-8692............12

Stevens Machinery Sales (2005) Inc, Toronto (Andrew) .........................416-798-3611............416-798-8439..............2

TCL Asset Group Inc, Toronto (Norm)..................................................... 416-736-1367............416-736-4159............13

TOS Trade Canada Inc., Milton (Marian) ................................................ 905-878-0888............905-878-9022..............1

Trader Machinery Inc, Concord (Jonathan)............................................. 905-669-7507............905-669-7512..............4

Quebec

Machinerie Gilles Lupien, Drummondville (Gilles)...................................819-478-5266............819-478-5266............17

Machinery S. Tremblay, Drummondville (Sylvain) ...................................819-477-6677............819-477-6466............15

Seguin Machinery Ltd, Vaudreuil-Dorion (Gerry).....................................514-935-3531............514-932-4459..............6

Stock Machine Tools Co. Ltd., Laval (Andre) .......................................... 450-232-0444.............................................. 16

USA

Jordan Craig Machinery Int’l Inc, New City, NY (Jordan).........................845-398-0073............845-398-0074..............8

COMPANY PHONE FAX PAGE

ADVERTISERS DIRECTORYOvensFor Powder Coating, Aging,

Stress Relief, Normalizing

Gas or Electric

Numerous Sizes Available

Call: 905-702-4644


P6100 PRESSES, OBI

60 Ton BLISS, C-60, 4"stk, A/C, (Brighton Machinery Sales Inc

Tel: 519-485-7089, Fax: 519-485-7368)

75 Ton TOLEDO, , Air Clutch & Brake, 5"stroke, (Brighton

Machinery Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)

80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x

36"bed, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

100 Ton CKD HRONOV, , TYP: LEND 100, A/C, Variable Stroke

Length, Command stamp ctls, (Brighton Machinery Sales Inc

Tel: 519-485-7089, Fax: 519-485-7368)

110 Ton NIAGARA, Model: A 5 1/2, 6" Stroke, Mech. Clutch w/air

assist, (Brighton Machinery Sales Inc Tel: 519-485-7089,

Fax: 519-485-7368)

P7100 PRESSES, STRAIGHT SIDE

800 Ton BLOW, SC2-800-96-60 (1998), 96"x 60" bed, 16"stk,

20-40spm, Like New!, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

P9150 PUNCHES, SINGLE STATION

25 Ton PIERCE-ALL, , (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

60 Ton FABMASTER, (2011), Like new, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

P9275 PUNCHES, TURRET

19 Ton TRUMPF, Trupunch 1000 (2007), Only 3109hrs, Ref#


Fax: 845-398-0074) See Page 8

20 Ton TRUMPF, Trumatic TC3000L (2007), 2KW Truzx 2000,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

20 Ton TRUMPF, TC2020R Rotation (2001), 19 Sta. Rotation,

50"x 100", Ref# 10267, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

22 Ton WIEDEMANN, 2044 (2001), 30 Sta, 2 A/I, 114 Style,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

22 Ton TRUMPF, TC2020R Bosch (2011), 50"x 100", Approx.

3100hrs, Ref# 10321, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

22 Ton AMADA, Apelio III 2510VL (2001), Fanuc 160 IL, 2KW

Laser, Under Amp, Ref# 9458, (Jordan Craig Machinery Int’l


22 Ton FINN POWER, F5-20 (2000), 60"x 80", 20 Station, Thick

Style, Ref# 10266, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

22 Ton TRUMPF, TC2020R (2011), 50"x 100", Like New, (Trader


See Page 4

22 Ton AMADA, Vipros 255 (1997), Fanuc 18P, 31 Sta., 3A/I,

Ball Table, Ref# 9801, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

22 Ton AMADA, Vipros 255 (1999), Fanuc 18P, 31 Sta., 3A/I,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

22 Ton AMADA, EM2510NT (2004), AMNC NT CNC, 50"x 100",

Servo driven, Ref# 10220, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

25 Ton TRUMPF, TC6000L 1600 (2010), Laser/Punch,

Sheetmaster, Ref# 10191, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

25 Ton TRUMPF, TC5000R-1600 (2005), New linear amplifier,

14,039hrs, Ref# 10159, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

33 Ton AMADA, Pega 345Q (1993), Fanuc O4PC, 58 Sta., 2 A/I,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

33 Ton AMADA, Vipros 358 King II, 58 Stn, Fanuc 18P, (Trader


See Page 4

33 Ton STRIPPIT, FC1250-30-1500, Fanuc OP, 2 A/I, (Trader


See Page 4

33 Ton AMADA, Vipros 357 Queen (1998), Fanuc O4PC &

PHNC, 58 Sta, 2 A/I, Ref# 10179, (Jordan Craig Machinery

Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

33 Ton AMADA, Pega 357 (1985), Fanuc 6M, 58 Sta, 2 A/I, Ref#


Fax: 845-398-0074) See Page 8

33 Ton AMADA, Vipros 358 KingII (1999), Fanuc 18P, 4A/I, Ref#


Fax: 845-398-0074) See Page 8

33 Ton AMADA, Vipros 3610L (2000), L-Shear, 6 Shelf Loader,

Unload Conveyor, Ref# 10269, (Jordan Craig Machinery Int’l


33 Ton NISSHINBO, HIQ1250PAL-510T (2000), 37 Station Thick

Turret, 3 A/I, Ref# 10212, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

33 Ton MURATEC WIEDEMANN, 3046A (2000), Fanuc 18-iP,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

33 Ton AMADA, Apelio III 357V (1998), Fanuc 16L CNC Ctrl,

1500 Watt Laser, Ref# 10274, (Jordan Craig Machinery Int’l


33 Ton AMADA, Vipros 368 King II (2000), Fanuc 18P, CNC

control, Ref# 10173, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

33 Ton AMADA, Pega 345Q (1993), Fanuc 04PC, 58 Sta, 2 A/I,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 8

R4704 ROLLS, ANGLE BENDING

2"x 2"x 3/16" “NEW” (Demo) TAURING, SAF DS 50HV,

Hydraulic, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV, (Trader Machinery


P6100 PRESSES, OBI R4704 ROLLS, ANGLE BENDING

PAGE 22 CLUE, August, 2015

ONLINE &TIMED AUCTION

SST TECHNOLOGIESA Division of Magna Powertrain Inc.

Late Model CNC Vertical Machining Centres • (2) 2011 Mazak Variaxis 630 5XII 5-Axis • (8) 2011 DMG DMC 635V ERGO LINE • 2007 Doosan Puma V400 • Large Quantity Cat 40 tooling • Mazak Palletech FMS (35) Pallet Transfer System • 2007 Mazak Variaxis 630 5XII 5-Axis • 2010 DMG DMC 635V ERGO LINE • Misc. Support & Tooling • Complete Mazak Variaxis System to be offered as a Complete Cell & Piecemeal • PARTIAL LISTING ONLY •

416.252.1955 • www.hilcoind.com

For more information, please contact Cassidy Baker at416.252.1955 or [email protected]

See our Website for Auction info & detailed Catalogue Listings & Photos

Sale Starts: Monday, Sept. 21 • 10 AM ESTBID NOW!

Ends: Thursday, Sept. 24 • 1 PM EST

Preview Date: Monday, Sept. 21 • 9 AM - 5 PMOr, by prior Appointment

Sale Location: 600 Tesma Way, Concord, ON


CLUE, May 2010 PAGE 21

R4704 ROLLS, ANGLE BENDING Z9000 MISCELLANEOUS

2-3/8" x 2-3/8" x 1/4" “NEW” FERRIC, APK60, Mod. Rolls, DRO,


See Page 24

4"x 4"x 3/8" “NEW” FERRIC, APK101, Mod Rolls, DRO, Hyd.

Side guides, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 24

6"x 6"x 1/2" PULLMAX, Z43, Hydraulic, Pendant Control, Digital

Readout, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

R5603 ROLLS, PLATE BENDING

1"x 10’ PULLMAX, PV7H, Hyd., 3-Roll Double Pinch, (Trader


See Page 4

3/16"x 4’ “NEW” FERRIC, , ASM plate roll, DRO, mot. Bending

roll, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 24

3/16"x 5’ “NEW” FERRIC, , ASM plate roll, DRO, mot. Bending


Fax: 905-820-3234) See Page 24

3/16"x 6.5’ “NEW” FERRIC, , ASM plate roll, DRO, mot. Bending


Fax: 905-820-3234) See Page 24

5/16"x 8’ “NEW” FERRIC, , AHS plate roll, 4 roll machine, DRO,


See Page 24

NANTONG, WIIJ-10, Max. Cap 3/8" x 6’, New 2012, Never used,

Roll speed 4m/min, (Machinerie Gilles Lupien

Tel: 819-478-5266, Fax: 819-478-5266) See Page 17

S0653 SAWS, BAND, HORIZONTAL

10.2" x 10.2" COSEN, C-260NC (2012), Fully automatic Horz,

PLC Control, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

S0690 SAWS, BAND, VERTICAL

24" STARTRITE, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 23

S0805 SAWS, COLD & FRICTION

SOCO, MC350A (2001), (Machine Solutions Inc.

Tel: 416-220-5910 See Page 3

S0948 SAWS, MISCELLANEOUS

4"x 10" ELUMATEC, , Fully Automatic Circular Saw, (Machinerie

Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)

See Page 17

S4105 SHEARS, POWER SQUARING

10ga x 48" TECHNOIMPEX, 1048 (1990), mechanical in

excellent working condition, $3,700, (Stock Machine Tools Co.

Ltd. Tel: 450-232-0444

1/4"x 10’ HACO, HSLX 3006, Mot. CNC back gauge, auto

gap-angle, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 24

1/4"x 10’ NIAGARA, IF-10-1/4II, Hydraulic, (Trader Machinery


1/4"x 10’ PEARSON, , Hydraulic, (Machine Solutions Inc.

Tel: 416-220-5910 See Page 3

1/4"x 10’ “NEW” FERRIC, HGD 3100 x 6, Mot. CNC back gauge,

Auto gap, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 24

1/4"x 10’ HACO, (2007), CNC with 39" back gauge, $19,500,

(Machine Solutions Inc. Tel: 416-220-5910 See Page 3

1/4"x 12’ WYSONG, , Mechanical, CNC gauging, (Machine


1/2" x 10’ “NEW” FERRIC, HGD 3100 x 13, Mot. CNC back

gauge, Auto gap, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 24

1/2"x 12’ ALLSTEEL, , Motorized BG adjustable rake and gap,

(Machine Solutions Inc. Tel: 416-220-5910 See Page 3

1/4"-1" x 8’-20’ “NEW” TOSKAR, , Hydraulic, (Machine Solutions

Inc. Tel: 416-220-5910 See Page 3

W3054 WELDERS, SPOT

20 KVA SIP, , (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

Z9000 MISCELLANEOUS

Transformers 5 KVA to 1000 KVA, Large Assortment of used,

(Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

Pallet Trucks, (Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

Assorted Fans, (Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

Barfeeds LNS, Servo S3 (2007), w/Remote pendant, (Trader


See Page 4

LYNDEY, Tool Presetter, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 23

WAHLI, , Tool Presetter, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 23

8 Ton PEMSERTER, Series 2000 (2002), PLC control, (Trader


See Page 4

Z9000 MISCELLANEOUS Z9000 MISCELLANEOUS

PAGE 22 CLUE, April 2012

MACHINERY ADVERTISER

PUBLISHER

David Stapleford

PRINTED BY:

Ricter Web Printing

DELIVERY

Clue is delivered monthly and is sent bythird class mail on or before the businessday following the seventh of each month

DEADLINE

The deadline for advertising is the dayfollowing the last Wednesday of the month

ADDRESS

343 Smith AveBurlington, ON, L7R 2T9

Phone: 905-528-7765Fax: 905-917-0222

www.cluemachines.com

e-mail: [email protected]

MUST SELL

Cincinnati 10ga x 10'

Power Squaring Shear

Bliss #21

Punch Press

Contact: TCL Asset Group Inc.Ph: 416-736-1367 x228

Website: www.managingyourassets.com

Alberta

B F G Machine Tools Inc., Edmonton (Brian) ...................................780-434-7795........780-436-0717 .......15

British Columbia

ECCO Machinery, Surrey (Rick) ......................................................778-298-2023........778-298-2024 .......17

Modern Tool (BC) Ltd, Port Coquitlam (Pam) ..................................604-472-1444........604-472-1455 .......16

Ontario

Brighton Machinery Sales Inc, Ingersoll (Brian) ...............................519-485-7089........519-485-7368 .......15

Cameron Steel, Lindsay (Bob) ........................................................705-878-0544........705-878-0560 .......21

Compumachine Canada, Toronto (Peter).........................................416-291-9499........416-291-4990 .......22

Corporate Assets Inc, Toronto (Daphne) .........................................416-962-9600........416-962-9601 .......27

Dipaolo CNC Retrofit Ltd., Mississauga (Nelson) ............................905-676-9265 ......................................10

Fabtec Machine Tool Solutions Inc, Oakville (Raj)............................905-469-1586........905-469-3054 .......18

Ferric Machinery Inc, Mississauga (Koen) ......................................877-337-7424........905-820-3234 .........3

Haco Canada, Mississauga (Francis)..............................................905-828-1087........905-828-2062 .......26

Havlik Int’l Machinery, Cambridge (John) ........................................519-624-6240........519-624-4119 .......13

Hayden Lee, Markham (Hayden) ....................................................905-201-7841........905-201-7842 .......14

Hove Machine Services, Wasaga Beach (David) .............................705-429-5910........705-429-1557 .......15

Infinity Assets Solutions, Concord (Leslie) ......................................905-669-8893........905-669-7512 .........2

L S Walker Machine Tools Inc, Milton (Chris) ..................................905-876-0890........905-876-1959 .......12

Machine Solutions Inc., Guelph (Andrew) .......................................416-276-0596 ......................................25

Micro Trend Robotics Inc, Pickering (Peter) ....................................905-509-1218........905-509-2687 .......15

Nimesch Machinery, Markham (George) .........................................416-786-7762........905-415-3868 .........1

Nova International, Mississauga (Richard) ......................................905-624-4522........905-624-1917 .......15

Park Thermal International, Georgetown (Sales) ..............................905-877-5254........905-877-6205 .......15

Phase Quest, Mississauga (Harold) ................................................416-578-5399........416-753-7209 .......15

Powermaster Machinery Ltd, Mississauga (Peter)...........................905-624-9327........905-624-8591 .........5

S K Braly Machinery Inc, Mississauga (Steve) ................................905-793-8080........905-793-2190 .......23

Sabito Machinery Inc, Vaughan/Concord (David) ............................905-738-8730........905-738-5148 .........4

Stan Canada Machinery & Equipment Ltd, Brampton ......................416-252-5767........416-252-4770 .......15

TOS Trade Canada Inc., Milton (Marian)..........................................905-878-0888........905-878-9022 .......28

Trader Machinery Inc, Concord (Jonathan) .....................................905-669-7507........905-669-7512 .........6

Quebec

Boulanger Machinerie Inc, St-Ferdinand (Ben).................................418-428-4709........418-428-4710 .......15

Camex Machinery, Montreal (Elias).................................................514-581-5370........888-414-6441 .......17

Machinerie Gilles Lupien, Drummondville (Gilles)............................819-478-5266........819-478-5266 .......23

Machinery S. Tremblay, Drummondville (Sylvain)............................819-477-6677........819-477-6466 .......15

Soudogaz, St-Lambert de Lauzon (Charles)....................................418 889-2002 ........418 889-2012........25

Stock Machine Tools Co, Laval (Andre) ..........................................514-326-7006........514-329-2599 .......15

USA

Jordan Craig Machinery Int’l Inc, New City, NY (Jordan)..................845-398-0073........845-398-0074 .........8

S R I Advertising, Encino, CA (Susan) ............................................818-761-1792........818-793-0351 .......25

Y.Franke & Company, LLC., Hoffman Estates, IL (York)....................847-874-8972........847-596-8006 .........9

COMPANY PHONE FAX PAGE

ADVERTISERS DIRECTORY

CERTIFIED EQUIPMENT APPRAISALS * Toronto, OntarioPhone: (905) 793-8080 Fax: (905) 793-2190 Email: [email protected]

W W W . S K B R A L Y . C O M

CLUE, July 2010 Page 3

AIR COMPRESSORS

GARDNER DENVER, Eberda, 15hp compressor

DRILLS

SAALFELD, BS50 Pillar drill, 2" capacity

FACING & CENTERING

SENECA FALLS, EW75

GRINDERS, SURFACE, RECIPROC

CHEVALIER, FSG-618M, 6"x 18" ManualOKAMOTO, ACC-618, 6"x 18" HydarulicNICCO, NFG-515HD, 6"x 20" Form grinderTOS, BRH20-02, 12"x 24" Hydraulic surface grinderBROWNE & SHARPE, 12"x 24"STUDER, S36, 13"x 40" CNC, CylindricalBLANCHARD, 16" Vertical surface grinder

KEYSEATERS

MORRISON Keyseater

LATHES, CNC

DAEWOO, 10 HC CNC Turning CentreMAZAK, Super Quadrad 200 4-AxisNAKAMURA TOME, TMC-15NAKAMURA TOME, SL-JR

LATHES, ENGINE

NAMSEON, 17"x 55"MORI SEIKI, MR-1500, 20"x 60"CHIEN YEH, 20"x 60"CHIEN YEH, CY560, 22"x 60"CHIEN YEH, CY560, 22"x 80"TOS, SN63/2000, 24"x 80"MORANDO, 24"x 120"PBR, TM-300, 24"x 196"

MACHINING CTRS, HORZ

ENSHU, JE30S, HorizontalOKUMA, MA40-HA, 16", HorizontalMORI-SEIKI, NV-5000, Vertical

MILLS, UNIVERSAL

JAFO, FWD 25U, 10"x 50"

MILLS, VERTICAL

FIRST, LC, 9"x 42" 1-1/2TOPWELL, VK 4, 10"x 50"FIRST, LC20VH, 10"x 50" Vert/HorizKAO FONG, 12"x 50" Horz/Vert

SAWS

BAXTER, 260, 10", HorizontalSOCO, MC350 NFA Automatic cut-off saw, non-ferrous

SHEARS, POWER SQUARING

DIACRO, 24"x 16ga Hand shear with standAMADA, M-2560, 1/4"x 8’

WELDERS, SPOT

CANOX, CPMS-20FT 20 KVA

TOOLING

WAHLI, MXH 300/200 Tool setterLYNDEX, E348 Elba tool setter

MISCELLANEOUS

Centering & Facing Machine, SENECA FALLS, CS.LO. Swing

End Finishing Machine, SOCO, EF-PV/52

Parts cleaner, HOTSY, 7630

Parts cleaner, HOTSY, H20-2836

Thread Rolling Machine, SHENG JIAN, Z28-63

Tilting box table, 30"x 24"x 22"



BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE

MAXIMART BEDMILL

DRILLMASTER RADIAL DRILL

“SPECIAL PRICES”HEAVY DUTY LATHES

Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders

NEW MACHINES“From Stock”

S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel

7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC

26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing

42” x 24” x 24” Fagor Control32” x 20” x 20”

28” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control

POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2

Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca

OVER 30LATHES

IN STOCK

OVER 40MILLS

IN STOCK

2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40

• Table size ranging from 2500 to 6000 mm • Machines large and heavy workpieces • High efficient machining • Rigid table bearing using hydro-static guiding principles • Precise table positioning (C-axis) and rotary tool drive with high power output • Siemens or Fanuc Control systems • Can be equipped to use high-pressure coolant

• High rigidity and stability • Functional design for easy maintenance • Short delivery time from manufacturer • Siemens or Fanuc control systems • Can be equipped with table positioning and rotary tool drive • Automatic exchange of turning tools and rotary tools • Ram designed for efficient and precise machining • Variable height of the working area • Possibility to perform high-pressure through tool coolant

High quality European built machines

Havlik Ad Sept 2015.indd 1 2015-08-27 10:20:08 PM


BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE

MAXIMART BEDMILL

DRILLMASTER RADIAL DRILL

“SPECIAL PRICES”HEAVY DUTY LATHES

Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders

NEW MACHINES“From Stock”

S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel

7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC

26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing

42” x 24” x 24” Fagor Control32” x 20” x 20”

28” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control

POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2

Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca

OVER 30LATHES

IN STOCK

OVER 40MILLS

IN STOCK

2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40

M A C H I N E R Y

899 Danforth PlaceBurlington, ON L7T 1S1Phone: 905-528-7765

Fax: 905-917-0222


Your Production Matters To Us

PROFILE ROLLS

PLATE ROLLS

PRESS BRAKES

FIBER LASER

PUNCH PRESS

PLASMA MACHINE

SHEARS

We offer innovative solutions to increase your productivity

ONTARIO - EASTERN CANADA3980 Chadburn CrescentMississauga, ON L5L 3X4Tel: 905-820-3232Fax: 905-820-3234

WESTERN CANADAWestside Service Ltd4406-58 St. SouthLethbridge, AB T1K7E2Tel: 403-380-5047Fax: 403-380-5048

FLEXIBLE COIL PUNCHING LINES

Quality | Service | Value | www.ferricmachinery.com

clue machinery - september 2015 issue

Documents