classic

CLASSICC

COLLECTTION

Calico(BLB 01)

Magic A

Magic A

Tortoise Shell(BLB 02)

Magic B

1” x 2” Recycled Glass

1/2” x 1/2”, 1/2” x 1”, 1” x 1” Recycled Glass

CLASSICC

COLLECTTION

Iceberg(C1)

Sea Weed(C3)

Mint(C5)

Peach(C9)

Calico (BLB 01)

1/2” x 1” Recycled Glass

1/2” x 1” Recycled Glass

3/8” x 3/8” Recycled Glass

3/8” x 3/8” Recycled Glass

5x12 23x12

24x24

273X302X6103/4x117/8x1/4

313X313X6125/16x125/16x1/4

327X327X6(127/8x127/8x1/4)

10 9.899 2125X51(1x2)

10 10.748 2113X13,13x25,25x25(1/2x1/2, 1/2x1, 1x1)

10

10

11.596

11.510

15

15

13X25(1/2x1)

325X313X6(1213/16x125/16x1/4)

9.5X9.5(3/8x3/8)

Phone: 1.888.862.8397 Fax: 1.888.868.9887

3. Apply set- ting material using the notched side of a 1/4”x1/4” squar- squar- -notched trowel.

4. Smoothen out the setting material using the flat side of the flat side of the trowel; create an even bedding approximately 3/16” thick.

5. Apply the tile sheets onto the setting material. material. (Paper side out!) Align the tile sheets carefully, making sure that the grout lines are parallel with one another.

1. Clean surface of application. Surface should be free of dirt, paint, oils, curing compounds etc.

2. Make sure the back of the tile (and sub-strate) is clean. Wipe with a clean damp sponge.

6. Use a rubber grouting float to apply firm pres-sure onto the tile sheets, cre-ating a level surface.

7.Allow 15-30 minutes for tile to set before continuing

8. To remove paper face. Apply warm water to tile sheets using a sponge. Allow water to be ab-sorbed into the sorbed into the

paper.

9. Starting from one of the top corners of the sheet, pull paper face downward to remove it from the tile.

10. Using a clean damp sponge or cloth, clean any excess setting material that may have “oozed” over the “oozed” over the tile surface.

11. Allow 24-36 hours, after installation, for tile to set before continuing.

12. Apply grout into grout joints using a rubber grouting float. Completely fill the grout joints, be sure that there are that there are

14. When grout has set (or when haze begins to form on the tile surface) clean the tile with a the tile with a clean,damp sponge.

15. For final polishing, use a dry cheese- cloth to polish the tile, within the tile, within 24 hours of grouting.

no holes while applying grout.

13. Clean any excess grout with a damp sponge or cloth, before grout hardens.