clamp-dokumentation clamp-documentation · 2019. 3. 25. · 4" 1708681 119 101.6 168.3 bs o.d. * bs...
TRANSCRIPT
-
TRI-FIT CLAMP Tri-Clamp Fittings aus Edelstahl Tri-Clamp stainless steel fittings
TRI-MATIC AG - CH-6331 Hünenberg Tel 041 780 22 22 - Fax 041 780 03 60 TRI-MATIC SA - CH-1400 Yverdon-les-Bains Tel 024 426 12 13 - Fax 024 426 12 71
TM_A_72engl.doc / 1118
Technische, massliche und preisliche Änderungen vorbehalten All information in this document can be changed without notice
Seite / Page 1
tri-matic.ch
CLAMP-Dokumentation
CLAMP-Documentation
-
TRI-FIT CLAMP Tri-Clamp Fittings aus Edelstahl Tri-Clamp stainless steel fittings
TRI-MATIC AG - CH-6331 Hünenberg Tel 041 780 22 22 - Fax 041 780 03 60 TRI-MATIC SA - CH-1400 Yverdon-les-Bains Tel 024 426 12 13 - Fax 024 426 12 71
TM_A_72engl.doc / 1118
Technische, massliche und preisliche Änderungen vorbehalten All information in this document can be changed without notice
Seite / Page 2
tri-matic.ch
Schweissstutzen 055
Welded hexagon nipple 055
Merkmale: Material: V4A Stahl / AISI 316L / DIN 1.4404 Sterilisationstemp.: max. +150°C Oberfläche: Ra < 0.6 µm Standard, mech. poliert Normen: BS O.D.*, ISO 1127, DIN 32676** Optionen: DIN 1.4435 Andere Rauheiten Elektropoliert
Characteristics: Material: Stainless steel AISI 316L / DIN 1.4404 Sterilisation temp.: max. +150°C Surface: Ra < 0.6 µm standard, mechanical polished Normes: BS O.D.*, ISO 1127, DIN 32676** Options: DIN 1.4435 Other surface finish Electropolished
Dimension
No.
TRI-MATIC A B SP L
1/2" 1707370 25.4 12.7 1.65 21.5
3/4" 1707371 25.4 19.05 1.65 21.5
1" 1707372 50.8 25.4 1.65 21.5
1 1/2" 1707252 50.8 38.1 1.65 21.5
2" 1707373 63.9 50.8 1.65 21.5
2" 1711310 64 50.8 1.65 36
2 1/2" 1707374 77.4 63.5 1.65 21.5
3" 1707375 90.9 76.1 1.65 21.5
4" 1707553 118.9 101.6 2.11 21.5
BS O.D.
* BS O.D. = ISO 2852 / BS 4825 ** auf Anfrage erhältlich / On request
DN
No.
TRI-MATIC A B SP L
8 1708608 34 13.7 2 18
10 1708609 34 17.2 2 18
15 1708610 34 21.3 2 18
20 1708198 50.5 26.9 2 21.5
25 1707957 50.5 33.7 2 21.5
25 1707480 50.8 33.7 2 21.5
32 1707551 50.5 42.4 2 21.5
32 1707552 64 42.4 2 21.5
40 1707826 64 48.3 2 21.22
40 1707956 64 48.3 2 21.5
50 1708611 77.4 60.3 2 21.5
65 1708612 91 76.2 2.5 21.5
80 1707554 106 88.9 2.5 21.5
100 1714339 155 129 2 28
ISO 1127
L
-
TRI-FIT CLAMP Tri-Clamp Fittings aus Edelstahl Tri-Clamp stainless steel fittings
TRI-MATIC AG - CH-6331 Hünenberg Tel 041 780 22 22 - Fax 041 780 03 60 TRI-MATIC SA - CH-1400 Yverdon-les-Bains Tel 024 426 12 13 - Fax 024 426 12 71
TM_A_72engl.doc / 1118
Technische, massliche und preisliche Änderungen vorbehalten All information in this document can be changed without notice
Seite / Page 3
tri-matic.ch
Aussengewinde-Adapter 026 Innengewinde-Adapter 027
Male thread adaptor 026 Female thread adaptor 027
Merkmale: Material: V4A Stahl / AISI 316L / DIN 1.4404 Sterilisationstemp.: max. +150°C Oberfläche: Ra < 0.6 µm Standard, mech. poliert Normen: BS O.D.*, ISO 1127, DIN 32676** Optionen: DIN 1.4435 Andere Rauheiten Elektropoliert
Characteristics: Material: Acier Inox / AISI 316L / DIN 1.4404 Sterilisation temp. : +150°C max. Surface: Ra < 0.6 µm standard mechanical polished Norms: BS O.D.*, ISO 1127, DIN 32676** Optioins: DIN 1.4435 Other surface finish Electropolished
Dimension
No.
TRI-MATIC D T A B L TL W
1/2"
3/4"
1"
1 1/2"
2"
2 1/2"
3"
4"
Dimension
No.
TRI-MATIC D T A B L TL W
1/2"
3/4"
1"
1 1/2"
2"
2 1/2"
3"
4"
Male Art. 026
Female Art. 027
* BS O.D. = ISO 2852 / BS 4825 ** auf Anfrage erhältlich / on request
Versch. Dimensionen möglich. Bitte kontaktieren Sie uns für mehr Informationen! 041 780 22 22 Different dimensions available. Please do not hesitate to contact us for further information! 041 780 22 22
-
TRI-FIT CLAMP Tri-Clamp Fittings aus Edelstahl Tri-Clamp stainless steel fittings
TRI-MATIC AG - CH-6331 Hünenberg Tel 041 780 22 22 - Fax 041 780 03 60 TRI-MATIC SA - CH-1400 Yverdon-les-Bains Tel 024 426 12 13 - Fax 024 426 12 71
TM_A_72engl.doc / 1118
Technische, massliche und preisliche Änderungen vorbehalten All information in this document can be changed without notice
Seite / Page 4
tri-matic.ch
Blinddeckel 029
Solid end cap 029
Merkmale: Material: V4A Stahl / AISI 316L / DIN 1.4404 SF-1: Oberfläche int. : Ra ≤ 0.4 µm mechanisch poliert Oberfläche ext.: Ra ≤ 0.8 µm mechanisch poliert Sterilisationstemp.: max. +150°C Optionen*: DIN 1.4435 Andere Rauheiten Elektropoliert
Characteristics: Material: Stainless steel / AISI 316L / DIN 1.4404 SF-1: Surface int. : Ra ≤ 0.4 µm mechanical polished Surface ext.: Ra ≤ 0.8 µm mechanical polished Sterilisation temp.: max.+150°C Options*: DIN 1.4435 Other surface finish Electropolished
No.
TRI-MATICD L ASTM A270 ISO 1127 Material
1708650 25 6 1/2", 3/4" 1.4404
1708655 34 6 DN 10-15 1.4404
1708615 50.5 6 1", 1 1/2" DN 20-25-32 1.4404
1708651 64 7 2" DN 40 1.4404
1708657 77.5 7 2 1/2" DN 50 1.4404
1708653 91 7 3" DN 65 1.4404
1708659 106 7 3 1/2" DN 80 1.4404
119 7 4" 1.4404
130 7 4 1/2" DN 100 1.4404
144.4 8 5" DN 125 1.4404
155 10 5 1/2" 1.4404
167 11.1 6" 1.4404 * auf Anfrage erhältlich / on request
-
TRI-FIT CLAMP Tri-Clamp Fittings aus Edelstahl Tri-Clamp stainless steel fittings
TRI-MATIC AG - CH-6331 Hünenberg Tel 041 780 22 22 - Fax 041 780 03 60 TRI-MATIC SA - CH-1400 Yverdon-les-Bains Tel 024 426 12 13 - Fax 024 426 12 71
TM_A_72engl.doc / 1118
Technische, massliche und preisliche Änderungen vorbehalten All information in this document can be changed without notice
Seite / Page 5
tri-matic.ch
Schlauchanschluss 028
Hose adaptor 028
Merkmale: Material: V4A Stahl / AISI 316L / DIN 1.4404 Sterilisationstemp.: max. +150°C Oberfläche: Ra < 0.6 µm Standard, mech. poliert Normen: BS O.D.*, ISO 1127**, DIN 32676** Optionen: DIN 1.4435 Andere Rauheiten Elektropoliert
Characteristics: Material: Stainless steel / AISI 316L / DIN 1.4404 Sterilisation temp. : +150°C max. Surface: Ra < 0.6 µm standard, mechanical polished Norms: BS O.D.*, ISO 1127**, DIN 32676** Options: DIN 1.4435 Other surface finish Electropolished
Dimension
No.
TRI-MATIC D L B C
1/2" * 25.4 40 9.5 12.7
3/4" 1709145 25.4 40 15.5 19.05
1" 1709146 50.8 40 20 25.4
1 1/2" * 50.8 40 34 38.1
2" 1709147 63.9 50 46 50.8
2 1/2" 1709148 77.4 60 58 63.5
3" 1709149 91 78.5 71 76.2
4" 1709150 119 86.5 95.5 101.6
BS O.D.
* auf Anfrage / on request * BS O.D. = ISO 2852 / BS 4825 ** auf Anfrage erhältlich / on request
-
TRI-FIT CLAMP Tri-Clamp Fittings aus Edelstahl Tri-Clamp stainless steel fittings
TRI-MATIC AG - CH-6331 Hünenberg Tel 041 780 22 22 - Fax 041 780 03 60 TRI-MATIC SA - CH-1400 Yverdon-les-Bains Tel 024 426 12 13 - Fax 024 426 12 71
TM_A_72engl.doc / 1118
Technische, massliche und preisliche Änderungen vorbehalten All information in this document can be changed without notice
Seite / Page 6
tri-matic.ch
Verschluss-Klammer 034
Heavy duty clamp 034
Merkmale: Material: V4A Stahl / AISI 304 / DIN 1.4301 Sterilisationstemp.: max. +150°C Oberfläche: Ra < 0.6 µm Standard, mech. poliert Normen: BS O.D.*, ISO 1127, DIN 32676**
Characteristics: Material: Stainless steel / AISI 304 / DIN 1.4301 Sterilisation temp. : +150°C max. Surface: Ra < 0.6 µm standard, mechanical polished Norms: BS O.D.*, ISO 1127, DIN 32676**
Dimension
BS O.D.
Dimension
ISO 1127
No.
TRI-MATIC
Ø Flansch
Ø Flange Ø max
Achse
Axis
1/2" - 3/4" / 1707205 25 27 1
/ DN 8/10/15 1719008 34 35 1
1" - 1 1/2" / 1707253 50.8 53
2" / 1707365 64 67
2 1/2" / 1707366 77.8 80 2
3" / 1707367 91 94
/ DN 80 1707368 106 108
4" / 1707369 119 122
* BS O.D. = ISO 2852 / BS 4825 ** auf Anfrage erhältlich / on request
Ausführung mit 2 Axen Version with 2 axes
-
TRI-FIT CLAMP Tri-Clamp Fittings aus Edelstahl Tri-Clamp stainless steel fittings
TRI-MATIC AG - CH-6331 Hünenberg Tel 041 780 22 22 - Fax 041 780 03 60 TRI-MATIC SA - CH-1400 Yverdon-les-Bains Tel 024 426 12 13 - Fax 024 426 12 71
TM_A_72engl.doc / 1118
Technische, massliche und preisliche Änderungen vorbehalten All information in this document can be changed without notice
Seite / Page 7
tri-matic.ch
T-Stück 030
Tee clamp 030
Merkmale: Material: V4A Stahl / AISI 316L / DIN 1.4404 Sterilisationstemp.: max. +150°C Oberfläche: Ra < 0.6 µm Standard, mech. poliert Normen: BS O.D.*, ISO 1127**, DIN 32676** Optionen: Andere Rauheiten Elektropoliert
Characteristics: Material: Stainless steel / AISI 316L / DIN 1.4404 Sterilisation temp. : +150°C max. Surface: Ra < 0.6 µm standard, mechanical polished Norms: BS O.D.*, ISO 1127**, DIN 32676** Options: Other surface finish Electropolished
Dimension
No.
TRI-MATIC D A L
1/2" 1708660 12.7 66.6 133.2
3/4" 1708663 19.05 66.6 133.2
1" 1708664 25.4 60.3 120.6
1 1/2" 1708665 38.1 69.9 139.8
2" 1708666 50.8 88.9 177.8
2 1/2" 1708667 63.5 88.9 177.8
3" 1708668 76.1 95.3 190.6
4" 1708669 101.6 114.3 228.6
BS O.D.
* BS O.D. = ISO 2852 / BS 4825 ** auf Anfrage erhältlich / on request
-
TRI-FIT CLAMP Tri-Clamp Fittings aus Edelstahl Tri-Clamp stainless steel fittings
TRI-MATIC AG - CH-6331 Hünenberg Tel 041 780 22 22 - Fax 041 780 03 60 TRI-MATIC SA - CH-1400 Yverdon-les-Bains Tel 024 426 12 13 - Fax 024 426 12 71
TM_A_72engl.doc / 1118
Technische, massliche und preisliche Änderungen vorbehalten All information in this document can be changed without notice
Seite / Page 8
tri-matic.ch
Bogen 031
90° bend 031
Merkmale: Material: V4A Stahl / AISI 316L / DIN 1.4404 Sterilisationstemp.: max. +150°C Oberfläche: Ra < 0.6 µm Standard, mech. poliert Normen: BS O.D.*, ISO 1127**, DIN 32676** Optionen: Andere Rauheiten Elektropoliert
Characteristics: Material: Stainless steel / AISI 316L / DIN 1.4404 Sterilisation temp. : +150°C max. Surface: Ra < 0.6 µm standard, mechanical polished Norms: BS O.D.*, ISO 1127**, DIN 32676** Options: Other surface finish Electropolished
Dimension
No.
TRI-MATIC A D L
1/2" 1708661 25.2 12.7 88.8
3/4" 1708670 25.2 19.05 88.8
1" 1708671 50 25.4 50.8
1 1/2" 1708672 50 38.1 69.9
2" 1708674 63.9 50.8 88.9
2 1/2" 1708678 77.5 63.5 108
3" 1708680 91 76.2 127
4" 1708681 119 101.6 168.3
BS O.D.
* BS O.D. = ISO 2852 / BS 4825 ** auf Anfrage erhältlich / on request
-
TRI-FIT CLAMP Tri-Clamp Fittings aus Edelstahl Tri-Clamp stainless steel fittings
TRI-MATIC AG - CH-6331 Hünenberg Tel 041 780 22 22 - Fax 041 780 03 60 TRI-MATIC SA - CH-1400 Yverdon-les-Bains Tel 024 426 12 13 - Fax 024 426 12 71
TM_A_72engl.doc / 1118
Technische, massliche und preisliche Änderungen vorbehalten All information in this document can be changed without notice
Seite / Page 9
tri-matic.ch
Dichtung 036
Gasket 036
Merkmale: Material: PTFE Sterilisationstemp.: max. +150°C Oberfläche: glatt Normen: BS O.D.*, ISO 1127**, DIN 32676** Optionen: FDA-Zertifikat
Characteristics: Material: PTFE Sterilisation temp: +150°C max. Surface: clogged Norms: BS O.D.*, ISO 1127**, DIN 32676** Options: Certificate FDA
Dimension
No.
TRI-MATIC A B C D
1/2" 1708662 22 9.6 / /
3/4" 1708673 22 16 / /
1" 1707291 / / 50 22
1 1/2" 1707255 / / 50 35
2" 1708675 / / 63.5 48
2 1/2" 1708676 / / 77 60
3" 1708677 / / 90 73
4" 1708679 / / 118 97
BS O.D.
Andere Dichtmaterialien (Silicon, EPDM, FPM, PTFE + EPDM) auf Anfrage. Other materials (Silicon, EPDM, FPM, PTFE + EPDM) on request.
* BS O.D. = ISO 2852 / BS 4825 ** auf Anfrage erhältlich / on request
-
TRI-FIT CLAMP Tri-Clamp Fittings aus Edelstahl Tri-Clamp stainless steel fittings
TRI-MATIC AG - CH-6331 Hünenberg Tel 041 780 22 22 - Fax 041 780 03 60 TRI-MATIC SA - CH-1400 Yverdon-les-Bains Tel 024 426 12 13 - Fax 024 426 12 71
TM_A_72engl.doc / 1118
Technische, massliche und preisliche Änderungen vorbehalten All information in this document can be changed without notice
Seite / Page 10
tri-matic.ch
Probeentnahmeventil 90° 023
needle sample valve 90° 023
Merkmale: Nennweite: ½" ¾" Clamp-Anschluss: 25.4 mm Schlauch Anschluss ext: Ø 6 Schlauch Anschluss int: Ø 4 Gehäuse: V4A Stahl / AISI 316L / DIN 1.4404 Kolben: V4A Stahl / AISI 316L / DIN 1.4404 Dichtung: FKM Sterilisationstemp.: max. +150°C Oberfläche: Ra ≤ 1.6 µm hochglanzpoliert
Characteristics: Diameter: ½" ¾" Clamp connection: 25.4 mm Hose connection ext.: Ø 6 Hose connection int.: Ø 4 Body: Stainless steel/AISI 316L / DIN 1.4404 Piston: Stainless steel/AISI 316L / DIN 1.4404 Seal: FKM Sterilisation temp: +150°C max. Surface: Ra ≤ 1.6 µm mirror polished
Dimension
No.
TRI-MATIC
1/2" 1707436
-
TRI-FIT CLAMP Tri-Clamp Fittings aus Edelstahl Tri-Clamp stainless steel fittings
TRI-MATIC AG - CH-6331 Hünenberg Tel 041 780 22 22 - Fax 041 780 03 60 TRI-MATIC SA - CH-1400 Yverdon-les-Bains Tel 024 426 12 13 - Fax 024 426 12 71
TM_A_72engl.doc / 1118
Technische, massliche und preisliche Änderungen vorbehalten All information in this document can be changed without notice
Seite / Page 11
tri-matic.ch
Probeentnahmeventil 041
Needle sample valve 041
Merkmale: Nennweite: ½" ¾" Clamp-Anschluss: 25.4 mm Schlauch Anschluss ext: Ø 6 Schlauch Anschluss int: Ø 3.5 Gehäuse: V4A Stahl / AISI 316L / DIN 1.4404 Kolben: V4A Stahl / AISI 316L / DIN 1.4404 Dichtung: EPDM Sterilisationstemp.: max. +150°C Oberfläche: Ra < 0.6 µm Standard, mech. Poliert Optionen: Andere Dichtung auf Anfrage
Characteristics: Diameter: ½" ¾" Clamp connection: 25.4 mm Hose connection ext.: Ø 6 Hose connection int.: Ø 3.5 Body: Stainless steel/AISI 316L / DIN 1.4404 Piston: Stainless steel/AISI 316L / DIN 1.4404 Seal: EPDM Sterilisation temp: +150°C max. Surface: Ra < 0.6 µm standard, mechanical polished Options: Other seal on request
Dimension
No.
TRI-MATIC
1/2" 1707204
-
TRI-FIT CLAMP Tri-Clamp Fittings aus Edelstahl Tri-Clamp stainless steel fittings
TRI-MATIC AG - CH-6331 Hünenberg Tel 041 780 22 22 - Fax 041 780 03 60 TRI-MATIC SA - CH-1400 Yverdon-les-Bains Tel 024 426 12 13 - Fax 024 426 12 71
TM_A_72engl.doc / 1118
Technische, massliche und preisliche Änderungen vorbehalten All information in this document can be changed without notice
Seite / Page 12
tri-matic.ch
Rückschlagventil demontierbar 048
Check valve removable 048
Merkmale: Nennweite: ½" ¾" 1“ 1 ½“ 2“ 2 ½“ Gehäuse: V4A Stahl / AISI 316L / DIN 1.4404 Kolben: PTFE Dichtung: PTFE Clamp: V4A Stahl / AISI 304 / DIN 1.4301 Feder: V4A Stahl / AISI 316 / DIN 1.4401 Sterilisationstemp.: max. +150°C Oberfläche: Ra < 0.6 µm Standard, mech. poliert Normen: BS O.D.*, ISO 1127**, DIN 32676**
Characteristics: Diameter: ½" ¾" 1“ 1 ½“ 2“ 2 ½“ Body: Stainless steel/AISI 316L / DIN 1.4404 Piston: PTFE Seal: PTFE Clamp: Stainless steel/AISI 304 / DIN 1.4301 Spring: Stainless steel/AISI 316 / DIN 1.4401 Sterilisation temp. : +150°C max. Surface: Ra < 0.6 µm standard, mechanical polished Norms: BS O.D.*, ISO 1127**, DIN 32676**
Dimension
No.
TRI-MATIC L
Valve size
mm
1/2" 1708682 70 25.4
3/4" 1708683 70 25.4
1" 1708684 85 50.4
1 1/2" 1708685 90 50.4
2" 1708686 125 63.9
2 1/2" 1708687 125 77.4
BS O.D.
-
TRI-FIT CLAMP Tri-Clamp Fittings aus Edelstahl Tri-Clamp stainless steel fittings
TRI-MATIC AG - CH-6331 Hünenberg Tel 041 780 22 22 - Fax 041 780 03 60 TRI-MATIC SA - CH-1400 Yverdon-les-Bains Tel 024 426 12 13 - Fax 024 426 12 71
TM_A_72engl.doc / 1118
Technische, massliche und preisliche Änderungen vorbehalten All information in this document can be changed without notice
Seite / Page 13
tri-matic.ch
Weitere Clamp Komponenten auf Anfrage More clamp components on request