cl02 (may 2012)

7/28/2019 CL02 (MAY 2012)

1/79

PROJECT: Infrastructure buildings of the residential complex (phase 2)

of ITCC complex - RIYADH

REVISED BOQ FOR PARKING CLUSTERS (CL02)

AMOUNT

SR

Soil investigation

The contractor shall implemented of exploratory drilling and Notemechanical test in all types of soil with on site testing and theissuance of the final report which contain the test results andrecommendations of the foundation work.

01 Research and treatment for cavities

Implementation through a perforating exploratory(cavity probing) In all 1 M3

types of rock to determined the horizontal and vertical elongation of

cavities, the contractor will be responsible for treatment all cavities

By injection and treatment for all cavities and voids of rock with all

necessary work accordance with the technical specifications and

instructions of the Supervising engineer

SITE DEVELOPMENT

The bidder is advised to visit the site before quoting the rates in

order to get himself familiarized with the present site conditions

Site clearance and demolitions

02 Demolish and clear away existing structures, pavings, electrical

lighting, pavements or upstands, cut and plug or reroute existing

service lines or utilities inside property line, clear site of rubbish or

any impediments, loose top soil and as deemed necessary, for the

total site cluster number 2 (CL02) area, approximately (23360m2),

subject to engineer approval and as coordinated with public

pension agency as shown on drawing CL02- XC-01 1 Item

To Collection SR

RATEITEM D E S C R I P T I O N QTY UNIT

Project No. J10-13300

ZUHAIR FAYEZ PARTNERSHIP

1 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

2/79




AMOUNT

SRRATEITEM D E S C R I P T I O N QTY UNIT

SITE GRADING

Bulk excavate over site on unclassified ground including all hard Noteand rock layers to reduced levels generally in cutting profiles the

work shall include clear away to approved disposals.

All additional excavation required for temporary works and spaces, Note

shoring, dewatering, removal of surplus excavated materials,

support, temporary spoil heaps and general compaction

EXCAVATION AND EARTHWORK

Necessary moving or transportation about the site excavation

material including handling to temporary stockpile or ultimate

disposal off site is to be included in the unit rate of excavation

SITE PREPARATION AND GRADING

01 Excavation oversite on unclassified ground including all hard and 50 M3

rock layers (if any) to reduced levels generally in cutting profiles

and forming depressions, falls and the like and clear away to

approved disposal tip.

02 Fill oversite with approved imported fill material according to site 2390 M3

soil report recommendation including compaction in making up

levels to required formations, embankments, contouring and the

like as per drawings and spec.

Note

Work on proposed structural built-up areas from part of the Work

pertaining to respective building or structure as measured

elsewhere.

To Collection SR



2 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

3/79




AMOUNT


PAVING AND SURFACING

01 Supply and install precast concrete shotblasted pavers (beige color) 2900 M2

size 400x400x60mm thk. with photocatalytic titanium doxide coating

including 100mm thick cast-in-place concrete slab with A193-WWF

mesh reinforcement, 20mm thick cement mortar setting bed,

moisture barrier on compacted subgrade, 3mm water proofing

membrane on R.C. slab as per detail no A1 on drawing CL02-XL301

to suit required locations as shown on drawing CL02-XL101

02 Supply and install precast concrete shotblasted pavers (beige, & 132 M2

brown color) size 400x400x60mm thk with photocatalytic titanium

doxide coating including 100mm thick cast-in-place concrete slab

with A193-WWF mesh reinforcement, 20mm thick cement mortar

setting bed, polyethylene moisture barrier, compacted subgrade,3mm water proofing membrane on R.C. slab as per detail no. A5 on

drawing CL02-XL301 to suit required locations as shown on drawing

CL02-XL101

03 Supply and install precast concrete shotblasted pavers (beige, brown 36 M2

& grey color) size 400x400x60mm thk with photocatalytic titanium

doxide coating including 100mm thick cast-in-place concrete slab


setting bed, polyethylene moisture barrier, compacted subgrade,

3mm water proofing membrane on R.C. slab as per detail no. A6 on

drawing CL02-XL301 to suit required locations as shown on drawing

CL02-XL101

04 Supply and install precast concrete shotblasted pavers (beige & light 755 M2

beige color) size 400x400x60mm thk with photocatalytic titanium

doxide coating ,w./grey color granite band size 200x200x30mm thk

including 100mm thick cast-in-place concrete slab with A193-WWF

mesh reinforcement, 20mm thick cement mortar setting bed,

polyethylene moisture barrier, compacted subgrade, 3mm water

proofing membrane on R.C. slab as per detail no. B3 on drawing

CL02-XL301 to suit required locations as shown on drawing

CL02-XL101

05 Supply and install polished granite paving dark &light colors,size 512 M2

400x400x30mm thk w.\ granite band dark color, size200x200x30mm including 100mm thick cast-in-place concrete slab


setting bed, polyethylene moisture barrier, compacted subgrade,

3mm water proofing membrane on R.C. slab as per detail no. C2

on drawing CL02-XL301 to suit required locations as shown on

drawing CL02-XL101

To Collection SR



3 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

4/79




AMOUNT


PAVING AND SURFACING

01 Supply and install concrete screed with epoxy coat finish including 5230 M2

100mm/50mm thick cast-in-place concrete slab with A193-WWF

reinforcement mesh, polyethylene moisture barrier, compacted sub

grade, 3mm water proofing membrane on R.C. slab as per detail

no. D on drawing CL02-XL301 to suit required locations as shown

on drawing CL02-XL101

02 Supply and install 50mm thk rubber pavement green, blue , brown 259 M2

& red color including adhesive mixture,100mm thick cast-in-place

concrete slab with A193-WWF mesh reinforcement smooth finish,

polyethylene moisture barrier, compacted subgrade, 3mm water

proofing membrane on R.C. slab as per detail no. E4 on drawing

CL02-XL301 to suit required locations as shown on drawingCL02-XL101

03 Supply and install asphalt paving comprising 80mm bituminous 2130 M2

wearing course, bituminous prime coat, including granular base

course, 3mm water proofing membrane on R.C. slab as per detail

no. F on drawing CL02-XL301 to suit required locations as shown

on drawing CL02-XL101

04 Supply and install cast in place concrete paving with A193-WWF 354 M2

mesh reinforcement, smooth finish light grey color, 100mm thick

w.\ brick edge band size 200x200x60mm thick including 20mm

thick cement mortar setting bed, polyethylene moisture barrier,

compacted subgrade, 3mm water proofing membrane on R.C. slab

as per detail no. G7 on drawing CL02-XL301 to suit required

locations as shown on drawing CL02-XL101

EARTH MOUNT

05 Supply and formation of 500-1500 mm height earth mount including

compacted sub base layer, 100 mmm thick layer of sand and

gravel mix, and all required to complete and finish te work as

shown on drawing CL02- XL101, and as per detail no. 5 on drawing

CL02- XL302 and sections details on drawing CL02- XL303 775 M2

(Softscape and planting soil mix are measured elsewhere)(area

measured on plan)

To Collection SR



4 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

5/79




AMOUNT


CURBS AND EDGING

01 Supply and install precast concrete road curb, size 300X500X150 885 Mmm with exposed aggregate finish including bedding, haunching,

cast in place concrete base and concrete grout behind curb, 20mm

thick cement mortar setting bed, on R.C. slab as per detail no.1 on

drawing CL02-XL302 to suit required locations as shown on

drawing CL02-XL101

02 Supply and install precast concrete mowing edge, size 152 M

200X100X65 mm including concrete base, 20mm thick cement

mortar setting bed, cast in place concrete base on R.C. slab, as

per detail no. 2 on drawing CL02-XL302 to suit required locations

as shown on drawing CL02-XL101

SUNDRIES

TENSILE STRUCTURE

03 Supply and install tensile staructure comprising columns, tent

fabric, foundation, earthwork, and all required to compleet and fix

the work as shown on drawing CL02- XL101 and as per detail no. 6

on drawing CL02- XL302, and sections details on drawing CL02-

XL303 and as per manufacturer's recommendations and subject to

engineer's approoval to cover an area of 125 m2

.

Contractor shall submitt shop drawings for approval before supply 1 No.

To Collection SR



5 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

6/79




AMOUNT


SITE SIGNAGE

Manufacturer's standard outdoor sings, letters and plaquesincluding fixings, finishes, accessories complete as per

details on drawing CL02-XC-04, CL02-XC-05 and as per

specifications

REGULATORY SIGNS

01 Ref. type R5-1 ( ENTRY PROHIBTED ) 8 No.

INFORMATIVE SIGNS

02 Ref. type I-1 (PARKING) 7 No.

03 Ref. type I-2 (ENTRY ) 7 No.

04 Ref. type I-3 (EXIT ) 6 No.

Manufacturer's standard outdoor signs, letters and plaques,

including fixings, accessories complete as per details on

drawing CL02-XL-602 to suit required locations as shown on

drawing CL02-XL-601 and as per specifications

05 Residential sign, as per detail (1) 10 No.

06 Directional sign, as per detail (2) 3 No.

07 Sports club building, as per detail (3) 2 No.

08 Sports club parking as per detail (4) 1 No.

To Collection SR



6 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

7/79




AMOUNT


ROAD SIGNAGE & PAVEMENTMARKING

Thermoplastic paint for traffic marking on drive way atbasement/ground floor and ramps floor as per

Manufacturer's standard as shown on details on drawing

CL02-XC-05, to suit required locations as shown on drawing

CL02-XC-04, as per specification and as per engineer's

instructions

pavement marking

01 White edge line, ref. detail 2 230 M

02 Lane marking, as per detail (3) 210 M

03 Dotted line marking (give way line), ref. detail 7 550 M

04 Through traffic arrow, ref. detail 9-1 46 No.

To Collection SR



7 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

8/79




AMOUNT


RAISED CONCRETE PLANTER

Supply and install concrete raised planter with granitecladding, including (Softscape and planting soil mix are

measured elsewhere), drainage layer, filter , membrane,

sealant and all required to compleet and finish the work as

per detail no. 3 on drawing CL02-XL302

01 Raised planter to suit required locations as shown on drawing

CL02- XL101 205 M2

RAISED CONCRETE PLANTER & WOODEN BENCH

02 Supply and install concrete raised planter with granite cladding,

and wooden bench, 50x75 mm interior wooden rails,comprisingconcrete walls, reinforced concrete slab with A 193 W.W.F

reinforcement mesh smooth finished, (Softscape and planting soil

mix are measured elsewhere), drainage layer, filter membrane,

water proofing membrane, protection board, sealant and all

required to compleet and finish the work as per detail no.4 on

drawing CL02- XL302, and sections details on drawing CL02-

XL303 to suit required locations as shown on drawing CL02- XL101 202 M2

To Collection SR



8 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

9/79




AMOUNT


LANDSCAPING

Palms including pit excavation, stakes and ties, soilplanting mix, mulching, filter membrane and drainage

layer all as details and planting schedule as per detail P1,

on drawing CL02-XL-401

01 P/Wf 7 No.

Trees including pit excavation, stakes and ties, soil

planting mix, mulching, filter membrane and drainage

layer all as details and planting schedule as per detail

P2 on drawing CL02-XL-401

02 T/Aa 2 No.

03 T/Af 12 No.

04 T/Po 4 No.

05 T/Tp 8 No.

Shrubs including planting, site excavation as required, soil

planting mix, mulching, filter membrane, screed sloped to

drain and drainage layer all as per details and planting

schedule as per detail P3,P5, on drawing CL02-XL-401

06 S/Hs 230 No.

07 S/Iha 35 No.

08 S/lo 26 No.

09 S/Ld 18 No.

10 S/Ob 10 No.

11 S/Pav 43 No.

12 S/Mc 203 No.

To Collection SR



9 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

10/79




AMOUNT


LANDSCAPING

Ground cover including planting, site excavation asrequired, soil planting mix, mulching, filter membrane,

screed sloped to drain and drainage layer all as per details

and planting schedule as per detail P3, on drawing

CL02-XL-401

01 G/As 574 No.

02 G/Lm 723 No.

03 G/Ggp 1162 No.

04 G/Gr (Y) 942 No.

Lawn planting, including soil planting mix, filter membrane

and drainage layer, screed sloped to drain all as per details

and planting schedule as per detail P4,P6 on drawing

CL02-XL-401

05 L/Cd 2117 M2

To Collection SR



10 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

11/79




AMOUNT


PLUMBING INSTALLATION

WASTE AND DRAINAGE INSTALLATION

Supply, install and testing pipework, UPVC schedule 40, the

work shall include but not limited to fittings, supports, cast

iron pipes on roof for vent with caps, installation, all

associate works and all materials and equipments required

to complete and finish the work according to drawings,

specification and code of practices

01 75 mm dia. 30 M

02 100 mm dia. 110 M

03 150 mm dia. 67 M

Accesssories

04 Ground cleanout 75 mm dia, ref. FCO 1 No

Construction work for briks inspection chamber, the work

shall include bit not limited to earth work, plain concrete

for foundation BED, concrete channel at chamber DED with

standard cast iron manhole frame and double cover and all

materials and equipments required to complete and finish

the work according to specifications, drawings and code of

practice

05 Inspection chamber, ref. (WIC) 600x600mm 1 No


Supply, installation and test drainage pipe work UPVC

schedule 80 the work shall include but not limited to fittings,

supports hangers, excavation, backfilling, cast iron pipes on

roof for vent with caps and all materials and equipment

required to complete and finish the work according to

specifiactions, drawings and code of practice

06 100 mm dia 80 M

To Collection SR



11 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

12/79




AMOUNT


Drainage installation to the external drainage network

Construction work for briks inspection chamber, the work shallinclude bit not limited to earth work, plain concrete for

foundation BED, concrete channel at chamber DED with

standard cast iron manhole frame and double cover, UPVC

pipework schedule 40 to nearest main sewer manhole and all

materials and equipments required to complete and finish the

work according to specifications, drawings and code of practice

01 Inspection chamber, ref. (IC) 600x600mm 2 No

02 Slow down chamber 9 No

To Collection SR



12 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

13/79




AMOUNT


POTABLE WATER INSTALLATION

Supply, install and testing pipework, UPVC Schedule 80 forpotable water the work shall include but not limited to

fittings, supports, all associate works and all materials and

equipments required to complete and finish the work

according to drawings, specification and code of practices

01 75 mm dia. 55 M

02 100 mm dia. 10 M

Supply, installation and test Packaged type constant

pressure booster potable water pumps, set of one duty and

one stand by pump, including piping and valving network

within pump chamber, complete with all controllers,accessories for automatic operateion and all associate

works as per code standard and as described on drawings

and specification

03 Ref. PWP CAP 3.14 KW 1 Set

04 Ref. CP CAP 0.5 HP 1 Set

Reinforced concrete under ground water tank and pump

room with proprietary cast iron manhole covers and frames

the work shall include but not limited to earthworks,

concrete works, sump pit, and submersible pump internal

lining and water proofing, access ladders, pipework andvalving, test main fold vent pipes, truck fill pipework with

back flow preventer, ventilating fan and duct work within

tank and pump room structure, and UPVC schedule 80

drainge pipe from submersible pump to the nearest sewer

manhole and all materials and equipments required to

complete and finish the work according to drawings,

specification and code of practices

05 Potable water tank CAP 83 M3 1 No.

06 Gray water tank CAP 25 M3 1 No.

07 Potable water tank CAP 173 M3 1 No.

To Collection SR



13 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

14/79




AMOUNT


POTABLE WATER SUPPLY SYSTEM

Packaged type variable speed discharge pressure systemGray water lift pumps (one duty & one stand-by), including

piping and valves network within pump chamber, complete

with all controllers, accessories for automatic operation as

scheduled on drawing as per spec. section 15453

01 Gray water lift pumps CAP. 5.23 KW 1 Set

Allow for the design, supply and installation of packaged

type waste water treatment plant complete including filter,

chemical feeders, air blowers controls, wirings, piping and

all as associated works as per specifications section 02736

and scheduled on drawing

02 Packaged water treatment unit 1 Item

NON-POTABLE WATER INSTALLATION

Supply, install and testing pipework, UPVC Schedule 80 for

non-potable water the work shall include but not limited to




03 75 mm dia. 22 M

Accessories

04 Isolating & check valve assembly 75 mm dia. 2 No

05 Water metre assembly 50mm dia., ref. (WMA) 3 No

06 Back flow preventer assembly, ref. BFPA 3 No


fire water the work shall include but not limited to




07 100 mm dia. 15 M

To Collection SR



14 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

15/79




AMOUNT


FIRE WATER UTILITIES

Supply, installation and test Electrically driven horizontalsplit case centrifugal fire pump, including piping network

and valving within pump chamber,complete with all

controllers, accessories for automatic operateion and all

associate workks as per code standard and as scheduled on

drawings and specification

01 Ref. FP1 CAP 75 KW electrically driven 1 No

02 Ref. FP2 CAP 75 KW fuel diesel driven 1 No

Supply, installation and test Electrically driven peripheral

turbine Jockey pump, including piping network and valving

within pump chamber, complete with all controllers,

accessories for automatic operateion and all associate

workks as per code standard and as scheduled on drawings

and specification

03 Ref. JP CAP 5 KW 1 No

IRRIGATION WATER INSTALLATION


Irrigataion water the work shall include but not limited to




04 20 mm dia. 115 M

05 25 mm dia. 140 M

06 32 mm dia. 170 M

07 40 mm dia. 160 M

08 50 mm dia. 370 M

To Collection SR



15 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

16/79




AMOUNT


IRRIGATION WATER INSTALLATION

Accessories

01 Supply and installation irrigation controller as detailed on drwings 1 No.

and as per specifications

02 Supply and installation bubbler for trees 10 No.

03 Supply and install bubbler for shrubs, ground cover and 869 No.

succulents

04 Supply and installation spray lawn sprinkler 60 No.

05 Gate valve W/valve box 20 mm dia., 1 No.





Supply and installation remote control valve assembly

including piping complete with valve box, Y-strainer,

accessories and all associated works as detail on drawing

and as per specifications section 02810

10 Ref. RCV 20mm dia. 1 No.





To Collection SR



16 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

17/79




AMOUNT


DIESEL FUEL STORAGE TANK INSTALLATION

Allow for underground fiberglass diesel fuel storage tankwith required capacity including concrete anti-flotation

pad, heavy duty traffic type manhole ring and cover,

pipework, valves duplex diesel fuel transfer pumps, steel

ladder, pea gravel bed, earthworks, fixings and accessories

all as detailed on drawings

01 Proprietary tank units CAP. 5675 Lit. 1 No.

To Collection SR



17 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

18/79




AMOUNT


SITE DEVELOPMENT

Collection

Sheet -1

Sheet -2

Sheet -3

Sheet -4

Sheet -5

Sheet -6

Sheet -7

Sheet -8

Sheet -9

Sheet -10

Sheet -11

Sheet -12

Sheet -13

Sheet -14

Sheet -15

Sheet -16

Sheet -17

To Bill Summary SR



18 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

19/79




AMOUNT


DIVISION 2 - SITE WORK

SITE GRADING

All additional excavation required for temporary works and spaces,

shoring, dewatering, removal of surplus excavated materials,

support, temporary spoil heaps and general compaction Note

EXCAVATION AND EARTHWORK

Necessary moving or transportation about the site excavation Note

material including handling to temporary stockpile or ultimate

disposal off site is to be included in the unit rate of excavation

Excavation in natural land consisting of solid rock formation,cracked rocks, bolders and natural contoured soil, temporary

earthwork supports, dewatering ( if any ) as per

specifications sections 02200

01 Excavation for foundations commencing from existing grade level 82460 M

Backfilling

02 Approved selected imported fill material including compaction in 1100 M

making up levels around and over foundations, beds and the like as

per spec. sections 02200

03 Approved fill material selected from excavated material including M price only

compaction as per specification section 02200

Drainage layer

04 100 mm thick compacted coarse gravel to underside of slabs on 18 M

grade as per specification section 02200

Soil treatment application for termite control

05 To subgrades of slabs and along periphery of building The work 21170 M

shall include all materials and equipments required to completeand finish the work according to specifications and code of

practice

To Collection SR



19 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

20/79




AMOUNT


DIVISION 2 - SITE WORK

TRAFFIC MARKING DIMENSION

Thermoplastic paint for traffic marking on parking pavement

as detail 11 shown on drawing CL-GA-901 and specification

01 Straight arrows 93 No.

02 Straight & curved arrows 1 No.

03 Parking lane marking 3817 M

04 Parking lane marking at site 175 M

05Handicapped marking on floor

16 No.

06 ENTRY (text) 5 No.

07 NO ENTRY (text) 8 No.

08 EXIT (text) 3 No.

09 Lane numbers 493 No

To Collection SR

To Collection

Sheet 19

sheet 20

To Bill Summary SR



20 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

21/79




AMOUNT


DIVISION 3 - CONCRETE

CONCRETE WORK

CONCRETE TYPES

Include in Unit Rates for concrete of the following types and

locations:

20 Mpa

a) Blinding concrete

b) Catch basins and side walks Note

40 Mpa

a) Footings

b) Columns and R.C. walls

c) Floor and roof slabs, beams, girders, stairs

d) Concrete topping or structural screed

e) Slab on grade

f) water tanks

Water stops including junction accessories are not measured

separately The cost of water stop items are to be included in the

unit rates of the related concrete items

To Collection



21 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

22/79




AMOUNT



Plain insitu concrete, 20 Mpa, cement type V as per drawingsand specifications section 03300

01 Screed, 50mm thick 1085 M

02 Blinding beds, 100mm thick 2170 M

Supply and placing Insitu reinforced concrete, 40 Mpa

cement type V including formwork and steel reinforcements

conforming to ASTMA615and A185 and all requiments to

finish the work according to drawings as per specifications

sections 03100, 03200 & 03300 , and code of practice in:

03 Raft foundation various thickening including depression areas, 13605 M

sump pits and elevators pits and electrical cables trench

04 Retaining walls 775 M

05 Reinforced concrete for tanks 351 M3

06 Slab on grade 125 mm thick with A193WWF mesh reinforcement 3 M

including thickening

To Collection



22 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

23/79




AMOUNT



CONCRETE WORK

Supply and placing of Insitu reinforced concrete, 40 Mpa

type I cement including formwork and steel reinforcements

conforming to ASTM A615 and A185 and all requirements to

finish the work according to the drawings,as per

specifications sections 03100, 03200 & 03300,and code of

practice

01 Columns 436 M

02 Shear wall 270 M

03 Beams 35 M

04 Suspended flat slabs, 300mm thickening including drop panel 2790 M



07 Ramps 120 M

08 Stairs including landings 66 M

PRECAST CONCRETE

Precast concrete wheel stopper including dowels, grouting

and accessories for complete installation as per detail 21 on

drawing CL-GA-901 and specification

09 Precast concrete wheel stopper including fixings 493 No.

10 Ditto,but at site 60 No.

To Collection



23 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

24/79




AMOUNT



CONCRETE WORK

Sundries

01 Allow for reinforced concrete equipment pads including upstand 8 M

surrounds and anti-vibration accessories as required

02 Allow for expansion joint, fillers, back rods and sealants at 955 M

expansion joints of concrete as required.

03 150mm thick raised slabs, Handicapped`s ramps and curbs to suit 4569 M

required areas as per detail 10,14, 20 on drawing CL-GA-901

To Collection



24 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

25/79




AMOUNT



Collection

Sheet - 21

Sheet - 22

Sheet - 23

Sheet - 24

To Bill Summary SR



25 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

26/79




AMOUNT


DIVISION 4 - MASONRY

UNIT MASONRY

Supply and fix concrete masonry blocks in courses with

cement lime mortar including concrete lintels over

openings , horizontal and vertical reinforcement, fixings,

fillers, sealants and grout to complete the work according

to specifications and drawings

01 200 mm thick wall 655 M

02 200 mm thick wall one hour fire rated 181 M

03 Ditto, but two hour fire rated 428 M

To Bill Summary SR



26 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

27/79




AMOUNT


DIVISION 5 - METALS

EXPANSION JOINT

Supply and install expansion joint including extruded

aluminum assemblies, fillets, accessories, fixing and

sealants as per detail1 on drawing CL-GA-902. Price includes

all required to thoroughly completet the work according to

code of practice and as per specification

01 Per linear meter, expansion joint for floor and ceiling as per detail 955 M

1CL-GA-902

Steel cover as per details on drawings

02 To suit electrical cable trench 60 M2

03 Per number, supply and install steel bollard comprising 150

mm dia. painted finish steel pipe filled with concrete,

including fixings, finishing, and all associated and required to

thoroughly complete the work as per detail no.19 on drawing

CL- GA-901 and as per specifications and supervisor

engineer's instructions

04 Per number, Bollards, exposed height 750 24 No

mm high

05 Supply and install 30mm depth panted galvanized cast iron

gratings including 40x40mm steel angle, medium gauge

galvanized gutter slope to drain and all required for fixing

and finisheng as per detail no.13 on drawing CL-GA-901 and 20 M

specificatons

To Bill Summary SR



27 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

28/79




AMOUNT


DIVISION 7 - THERMAL AND MOISTURE PROTECTION

Water proofing and moisture protection as per specificationsection 07100

01 Membrane waterproofing to suit "wet room" areas including upturn 43 M

to abutting walls or upstands concrete screed and all required

material and equipments to complete the work as per details

shown on drawing, according to specifications and code of practice

02 Membrane waterproofing to suit concrete wall and foundation 24855 M2

03 Protection board to suit concrete walls 3500 M2

Vapour barrier

04 Vapour barrier to underside of slabs, beds, and the like, 18 M

specifications section 07100

To Bill Summary SR



28 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

29/79




AMOUNT


DIVISION 8 - DOORS AND WINDOWS

DOOR SETS

Supply and install all doors to suit masonry openings and approved Note

samples including fixings, decorations, frames, architrave,

hardwares and saddles and all required materials and equipments

to complete and finish the work as detailed on drawing VL-GA-02

and according to specifications and code of practice

TYPE A : 44mm thick painted wood door door including

frames and decortion as per drawings and specification

01 TypeA1, single leaf door, size 800x2150mm 11 No.

TYPE B : 44mm thick painted hollow metal insulated

door including door grill (where required)

02 Type B1, single leaf door, size 900x2150mm and 45 minute 4 No.

fire rated

03 Type B3, single leaf door, size 800x2150mm and 45 minute 1 No.

fire rated

04 Type B5, single leaf door, size700x2150mm 5 No.

05 Type B6, double leaves door, leaf size 950x2400mm and 45 minute 1 No.fire rated

TYPE C : 44mm thick fully louvered paneled hollow metal.

door motorized adjustable louvers panel working upon signal

from fire alarm system for generator including frames

including frames and decoration as per drawings and

specifications

06 Type C1, double leaves door, leaf size 950x2400mm and 45 minute 9 No.

fire rated

07Type C2, double leaves door, leaf size1050x2400mm and 45 minute 1 No.fire rated

To Collection SR



29 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

30/79




AMOUNT



DOOR SETS

TYPE D : 44mm thick paneled hollow metal door with 6 mm

thick wired glass fixed vision panel including frames and

decoration as per drawings and specifications

01 Type D2, single leaf door, size900x2150mm 3 No.

To Collection SR



30 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

31/79




AMOUNT



Collection

Sheet - 29

Sheet - 30

To Bill Summary SR



31 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

32/79




AMOUNT


DIVISION 9 - FINISHES

INTERNAL FINISHES

Flooring including respective types of bounding materials,

concrete screed sub-floor of required thickness, (if any)

accessories for complete installations as per ID drawing

and specification

01 Epoxy paint on cement screed , ref.EC 325 M

02 Anti carbonation Porcelain epoxy coating for pavement , ref.AEC 4569 M

03 Multi component epoxy coating on concrete screed for drive way & 12988 M

turns , ref.MEC

04 Ceramic floor tiles size 600x600mm , ref.CR1 198 M

05 Ceramic floor tiles size 300x300mm , ref.CR2 18 M

Finishings : bases including sand-cement backing mortar

and grout

06 100 mm high Ceramic tiles base , ref. B03 215 M

To Collection SR



32 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

33/79




AMOUNT



INTERNAL FINISHES

Finishings : walls including metal angle beads and lathing at

junctions of differing backgrounds

01 Cement plaster to suit walls 8420 M

02 Paint on cement plaster ,ref. W01 8420 M

03 Non toxic epoxy paint on structure ,ref. W07 2139 M

04 Ceramic wall tiles ,ref. W03 105 M

Finishings : ceilings

05 Cement plaster to suit ceiling 18058 M

06 Paint on cement plaster, ref.C01 18058 M

07 Metal tiles 600x600mm Ref. C05 40 M

To Collection SR



33 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

34/79




AMOUNT



Collection

Sheet - 32

Sheet - 33

To Bill Summary SR



34 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

35/79




AMOUNT


DIVISION 10 -SPECIALTIES

CORNER & COLUMN GUARD

Corner guards install at 600 high from finish floor heavy duty

rubber guard bumper, including all associated works, as per

detail 18 shown on drawing CL-GA-901 and as specification

01 To suit column location as required 442 No

ALUMINUM SAND TRAP LOUVERS

Supply and installation fixed anodized aluminum sand trap

louvers panels on anodized aluminum frames including

fixings and including frames and decoration as per drawing

CL - GA- 802 and specifications

02 Ref.L02, size1800x3200mm . 1 No.

03 Ref.L03, size2500x3200mm . 2 No.

04 Ref.L04, size2500x3400mm . 3 No.

05 Ref.L05, size2500x1500mm . 6 No.

06 Ref.L06, size2500x2300mm . 2 No.

07 Ref.L07, size700x450mm . 2 No.

08 Ref.L08, size400x700mm . 6 No.

To Collection SR



35 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

36/79




AMOUNT



SIGNAGE

Manufacturer's standard indoor signs, letters and plaques

including fixings, finishes, accessories complete as per

interior design drawings CL02-i901 to CL02-i910 and all

required materials and equipments to complete and finish

the works according to specifications, drawings and code of

practice

01 Ref. type S01 23 No







TOILET AND BATH ACCESSORIES

Supply and installation of following

toilet and bath accessories as per

schedule including fixings andtrims as shown on drawings and

specification

08 Ref. FM2, Clear glass mirror with stainless steel frame, size 400 x 5 No

600 mm

09 Ref. RH, Single robe hook 10 No

10 Ref. SDH, Wall mounted soap dish and holder . 5 No

11 Ref.SH1 wall mounted shower head . 5 No

To Collection SR



36 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

37/79




AMOUNT



Collection

Sheet - 35

Sheet - 36

To Bill Summary SR



37 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

38/79




AMOUNT


DIVISION 14 - CONVEYING SYSTEMS

AUTOMATED WASTE COLLECTION SYSTEM

Supply and provide all required to construct, test and operate

automated waste collection system, consisting of the following

items:-

01 Discharge valve room with basement floor including all required works 10 No.

as detailed on drawing no. STM - ITCCP2 - TD - 008. Contractor shall

perform all required coordination with other trade to ensure proper

installation and operation of the complete system to transport waste

from tower chute to pipe networks as shown on drawings STM -

ITCCP2 - TD - 001 to 007 and 015, 016 and according to

manufacturer's standards and specifications

02 Full Vacuum Load station including required earthworks, concrete 1 No.

works, masonry and electromechanical works for the vacuum room

and PAI service box located at the end of pipe work including all

required works as detailed on drawing no. STM - ITCCP2 - TD - 010

and 011. Contractor shall perform all required coordination with other

trade to ensure proper installation and operation of the complete

system to transport waste kitchen areas to pipenetworks as shown

on drawings STM - ITCCP2 - TD - 001 to 007 and according to

manufacturer's standards and specifications

PIPE WORK

Supply and installation of Automated waste collection systempiping. Item shall include the earth works, insulation,

,concentric reducer, puddle flanges ,inspection covers and all

required materials and equipments to complete the transport

pipe line from DV rooms , outdoor load stations and full

vacuum load stations to waste plant

03 508mm under/above ground transport pipe 975 M

RC MANHOLE

Supply and install cast insitu or precast reinforced concrete

manhole ,the item shall include excavation, backfill insulation

,inspection cover and all required to complete the work.

04 RC manhole to suit required location in sitesas shown on drawings 20 No.

STM - ITCCP2 - TD 001 to 016

To Bill Summary SR



38 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

39/79




AMOUNT


DIVISION 15 - MECHANICAL

PLUMBING INSTALLATIONS

SANITARY FIXTURES

Supply and install sanitary fixtures, water mixers and

accessories, as selection schedule, the work shall include

but not limited to necessary fittings, trims, valves, traps,

spouts and all materials and equipment required to

complete and finish the work according to specifiactions,

drawings and code of practice

01 Floor mounted water closet with f lush tank, ref. (WC) 5 No

02 Lavatory without pedistal, ref. LAV 5 No

03 Counter top one bowel sink, ref. 03 3 No

To Collection SR



39 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

40/79




AMOUNT










specifiactions, drawings and code of practice

01 32 mm dia 310 M

02 40 mm dia 85 M

03 50 mm dia 380 M

04 75 mm dia 820 M

05 100 mm dia 1700 M

06 150 mm dia 1415 M





required to complete and finish the work according tospecifiactions, drawings and code of practice

07 100 mm dia 175 M

Accessories

08 Floor drain, 50 mm dia., ref. (FD) 32 No.

09 Parking drain, 150mm dia., ref. PD 50 No.

10 Cleanout, 50 mm dia., ref. (CO) 3 No.




To Collection SR



40 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

41/79




AMOUNT





Accessories

01 Floor cleanout 50mm dia., ref. (FCO) 18 No.



04 Gully trap, ref. GT 2 No.

05 Trench drain outlet, 100mm dia., ref. TDO 4 No.

06 Running trap 32mm dai., 10 No.

Reinforced concrete sump pit including internal lining,

proprietary galvanized steel manhole cover and frame,

guide bar, lifting chain and all associated works, valves

pipework within sump pit chamber as detailed on drawings

(concrete work & earthwork, waterproofing measured

elsewhere)

07 Sump pit 8 No.

Submersible pumps (one duty and one stand-by) includingassociated valves, pipework, valves controllers and

accessories within sump pit chamber as described on

drawings (sump pit measured separately)

08 Ref. SP1 capacity 1.5 HP 8 Set

To Collection SR



41 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

42/79




AMOUNT




POTABLE WATER INSTALLATION

Supply, installation and test pipework, plypropylene

for potable water the work shall include but not limited

to installation, fittings, insulation for hot pipework,

valves, supports and all materials and equipment


specifications, drawings and code of practice

01 15 mm dia. 58 M

02 20 mm dia. 758 M

03 25 mm dia. 195 M

04 50 mm dia. 740 M

05 63 mm dia. 220 M

06 75 mm dia. 60 M

07 100 mm dia. 245 M

NON-POTABLE WATER INSTALLATION

Supply, installation and test pipework, plypropylenefor non-potable water the work shall include but not limited

to installation, fittings, insulation for hot pipework,

valves, supports and all materials and equipment


specifications, drawings and code of practice

08 20 mm dia. 25 M

09 50 mm dia. 1550 M

10 63 mm dia. 215 M

11 75 mm dia. 500 M

12 100 mm dia. 330 M

To Collection SR



42 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

43/79




AMOUNT




HOT WATER INSTALLATION

Supply, installation and test pipework, plypropylene

for hot water the work shall include but not limited to

installation, fittings, insulation for pipework, valves,

supports and all materials and equipment required to

complete and finish the work according to specifications,

drawings and code of practice

01 15 mm dia. 55 M

02 20 mm dia. 10 M

Accessories

03 Water meter assembly 63mm dia., 10 No.

04 Isolating valve 20 mm dia., ref. (IV) 7 No.

05 Isolating valve, 25 mm dia, ref. (IV) 9 No.




09 IV & CV assembly 50 mm dia., 2 No.

10 IV & CV assembly 100 mm dia., 5 No.

11 Hand spray with flexible hose and wall hook, ref. (HS) 5 No.

12 Wall mounted shower head with mixer, ref SH 4 No.

13 Hose bib, 20mm dia., ref. )HB) 48 No.

To Collection SR



43 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

44/79




AMOUNT




Supply, install, testing and commissioning electrical water

heaters the work shall include but not limited to short

length pipework, valves, supports, controls, fixings,

accessories and all associate works and all materials and



01 Ref. EWH- 1 3 No

Drainage installation

Reinforced concrete gray water tank with proprietary

medium duty cast iron manhole cover and frame, includingsump pit, submersible pumps, internal lining, access ladder

vent pipework within tank as detailed on drawing (Concrete

work, earthwork & water proofing measured elsewhere)

02 Gray water tank CAP. 41 m3 1 No



Packaged type variable speed discharge pressure system

Gray water lift pumps, including piping and valves network

within pump chamber, complete with all controllers,accessories for automatic operation as scheduled on

drawing as per spec. section 15453

05 Gray water lift pumps CAP. 5 KW 2 Set

06 Gray water lift pumps CAP. 6 KW 1 Set

Allow for the design, supply and installation of packaged

type waste water treatment plant complete including filter,

chemical feeders, air blowers controls, wirings, piping and

all as associated works as per specifications section 02736

and scheduled on drawing

07 Packaged water treatment unit. Cap. 41 m3/day 1 No.



To Collection SR



44 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

45/79




AMOUNT




Packaged type duplex unit discharge pressure system

potable water lift pumps, (one duty & one stand by)

including piping and valves network within pump chamber,

complete with all controllers, accessories for automatic

operation as scheduled on drawing and specification

section 15453

01 Circulating potable water pump CAP. 7.17 KW 2 Set

02 Circulating potable water pump CAP. 0.5 HP 2 Set

Reinforced concrete under ground water tank and pump

room with proprietary cast iron manhole covers andframes, including internal lining access ladders, pipework

submersible pump, ventilating fans with exhaust and fresh

air pipework, valves, vent pipes and truck fill pipework as

detailed on drawings (concrete work & earthwork, water

proofing measured elsewhere)

02 Potable Water tank CAP. 263 M3 1 No.

03 Potable Water tank CAP. 265 M3 1 No.

To Collection SR



45 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

46/79




AMOUNT




Supply, installation and test Pipework, UPVC class 5

including fittings, trenching, back fill supports system and

all associate works as per code standard

01 25 mm dia. 2705 M

02 32 mm dia. 675 M

03 40 mm dia. 875 M

04 50 mm dia. 265 M

05 100 mm dia. 1505 M

06 150 mm dia. 430 M

Accessories

07 Pendent sprinkler head 70 No

08 Upright sprinkler head 1260 No

09 Side wall sprinkler head 15 No

10 100mm Fire departement valve , ref. FDV 26 No

11 Floor control valve assembly 150mm dia., ref. FCVA 4 No

12 Fire department connection, 2 way fire department inlet

connection type with gate and check valve 100mm dia. 4 No

13 Back folw preventer assembly, 150mm dia., ref. BFPA 1 No

14 Supervisory switch 150mm dia., 1 No

To Collection SR



46 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

47/79




AMOUNT




Supply, install, testing and commissioning proprietary

integrated fire hose reel and fire extinguisher cabinet the

work shall include but not limited to fire extinguisher, hose

reel nozzle, fixings, isolating valve 40 mm dia., trims and

all associate works and all materials and equipments


drawings, specification and code of practices

01 Ref. FHC 12 No

Supply, install, testing and commissioning portable

multipurpose fire extinguisher the work shall include butnot limited to fixing to wall, all associate works and all

materials and equipments required to complete and finish

the work according to drawings, specification and code of

practices

02 Ref. PFE 3 No

03 Ref. CO2 10 No

CO2 system

Supply, install and test CO2 cylinders including pipe work,

black steel seamless for CO2 fittings, supports valves,

regulators, sleeves, as shown on drawings and as per

specification

04 CO2 cylinders CAP 45 KG 52 No.

05 Control panel 22 No.

06 Remote manual release 22 No.

07 Abort switch 22 No.

08 Alarm bell 22 No.

09 4-port nozzle 22 No.

10 Ioization detector 22 No.

To Collection SR



47 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

48/79




AMOUNT



PLUMBING INSTALLATION

DIESEL FUEL STORAGE TANK INSTALLATION

Allow for underground fiberglass diesel fuel storage tank

with required capacity including concrete anti-flotation

pad, heavy duty traffic type manhole ring and cover,

pipework, valves duplex diesel fuel transfer pumps, steel

ladder, pea gravel bed, earthworks, fixings and accessories

all as detailed on drawings



To Collection SR

Collection

Sheet -39

Sheet -40

Sheet -41

Sheet -42

Sheet -43

Sheet -44

Sheet -45

Sheet -46

Sheet -46

Sheet -47

Sheet -48

To Bill Summary SR



48 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

49/79




AMOUNT


DIVISION 15B - MECHANICAL

HVAC INSTALLATIONS

CHILLED WATER SYSTEM

Supply, install and test black steel pipework including

fittings thermal insulation, valves, gagues, strainers,

flexible connections and accessories as per required

drawings and spec. sections15050 to 15140 ,15510

01 15 mm dia. 175 M

02 20 mm dia. 40 M

03 25 mm dia. 70 M

04 32 mm dia. 65 M

05 40 mm dia. 30 M

06 100 mm dia. 280 M

07 150 mm dia. 185 M

08 200 mm dia. 450 M

09 300 mm dia. 260 M

To Collection SR



49 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

50/79




AMOUNT



HVAC INSTALLATIONS

Isolating valves

01 300 mm dia. 2 No.

02 200 mm dia. 4 No.

03 40 mm dia. 10 No.

04 32 mm dia. 10 No.

Check valve

05 40 mm dia. 5 No.

06 32 mm dia. 5 No.

BTU meter

07 40 mm dia. 5 No.

08 32 mm dia. 5 No.

Supply, install, test and commission, Fan coil units ducted

type including control valves, pressure & temperature,

gauge, Y-strainer mounting and fixing as per drawings and

specifications section 15781

09 Ref. FCU-02, 4 KW cooling capacity 5 No.

10 Ref. FCU-03, 2.4 KW cooling capacity 5 No.





To Collection SR



50 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

51/79




AMOUNT



HVAC INSTALLATIONS

Supply and install of A/C unit room air conditioning type

with wooden frame as detailed on drawing and

specifications

01 Ref. RAC-01, 3.5 KW nominal coolling capacity 21 No.

Supply, install, test and commission DX- ducted split unit

including control, pipes and fixing as per drawings and

specifications

02Ref. FCU-01/ACC-01, 4KW capacity 3 No.

Supply, install, test and commission, Ventilating fans as

details on drawings and specifications, section 15860

03 Ref. PEF- 01, 13500/22500 LPS capacity with exh. Duct and 6 No.

CAP. On roof

04 Ref. EF- 02, 50 LPS capacity 3 No.











15 Ref. BIF- 12, 3480 LPS capacity 23 No.

To Collection SR



51 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

52/79




AMOUNT



HVAC INSTALLATIONS

Supply, install, test and commission, Supply air round

ceiling diffusers with opposed blade volume damper

including frame trims & insulated plenum box as detailed

on drawing and specification, section 15860

01 Ref. SD1 5 No.

02 Ref. SD2 20 No.

Supply, install, test and commission, Supply air tegister

as detaild on drawings and specification

03 Ref. SR1/RR1 6 No.

Supply, install, test and commission, door grille

as detailed on drawings and specification

04 Ref. DG1 2 No.

05 Ref. DG2 10 No.

06 Ref. DG3 18 No.

Supply and install exhaust register as detailed on

drawing and specification, section 15891

07 Ref. ER1 12 No.

Supply and install Galvanized steel sheet rectangular

ductwork, including supports and volume damper ,

and bill mouth opening as per drawings and

specification, section 15891

08 Various gauges 950 Kg

Supply and install Duct insulation

09 Thermal semi-rigid insulation to rectangular ductwork 245 M

To Collection SR



52 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

53/79




AMOUNT



HVAC INSTALLATIONS

Supply, install and operations supply motorized damber

door louver as detailed on drawing and specifications

01 Size 2200 x 950 mm 3 No.

Supply, install, test and commission, Supply air square

ceiling diffusers as detailed on drawing and specification,

section 15860

02 Ref. SD 1/A,B,C 15 No.

Supply, install, test and commission, return air round


section 15860

03 Ref. RD 1 5 No.

04 Ref. RD 2 20 No.

Supply, install, test and commission, return air square


section 15860

05 Ref. RD 1/A,B,C 15 No.

Supply, install and test generator exhaust ductwork with

canvass connection

06 To suit generator room 3 No.

To Collection SR



53 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

54/79




AMOUNT



HVAC INSTALLATIONS

Collection

Sheet - 49

Sheet - 50

Sheet - 51

Sheet - 52

Sheet - 53

To Bill Summary SR



54 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

55/79




AMOUNT


DIVISION 16 - ELECTRICAL

MEDIUM VOLTAGE INSTALLATION

MVSWGR (medium voltage switchgear)

Supply , install , testing and commissioning 13.8 KV, 3 phase,

60 Hz,SF6 MVSWGR with 2 cells including all associated works

to complete installation as per drawings and specifications.

The contractor shall prepare sketches and details for approval

from SEC and shall make arrangement and required

coordination with supervising engineer to complete the work

01 Ref (MVSWGR/CL-2) 1 No

RING MAIN UNIT

Only installation, testing and commissioning for 13.8 KV, 3

phase, 60 Hz SF6 ring main unit including all associated works

for complete installation as per drawings and specifications and

required coordination (supply will be by client)

02 Ring Main Units , ref (RMU1-CL2 ,RMU2-CL2& RMU3-CL2) 3 No

Supply , install, testing and commissioning of the following

equipment including grounding, all accessories and necessary

works required for installation as per SEC regulation and as

shown on the drawings and as described in specifications andrequired coordination

03 Dry type transformer 1600 KVA, 13.8KV -400/230V, 3PH, 60HZ , ref 3 No

(TR1-CL2 , TR2-CL2 &TR3-CL2)

To Collection SR



55 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

56/79




AMOUNT



MEDIUM VOLTAGE INSTALLATION

Supply , install and test medium voltage copper Cables 15KV/

XLPE/STA/PVC, between medium voltage equipments as

shown on drawings and coordination with other disciplines

shall be conducted during work execution as per technical

specifications, drawings and by making arrangement with

supervising engineer to achieve the work to the best possible

and specifications

01 Medium voltage cable comprising 3 core 70 mm CU / XLPE /STA/ 15 M

PVC, cables route from RMU up to transformers

02 Medium voltage cable comprising 3 core 300 mm CU / XLPE /STA/ 510 M

PVC, cables

Smart Metering System

Supply, installation , testing and commissioning of Smart

Metering System comprising of M-bus master controller ,M-bus

IP router, complete with soft ware, including electronic

KWH meter, interface with water meter& digital BTU meter,

M-bus & 1 pair twisted cable # 22 AWG for each meter,

and the necessary connection to TCP/IP net work and

all associated works required as shown on drawing and as

described in specifications

To suit Building Smart Metering System as required to form a Note

complete and fully operative system to link all project buildings

with the existing data center at phase (1)

03 Electronic KWH meters 12 No

04 M-bus master controller complete with software 12 No

05 M-bus IP router 12 No

To Collection SR



56 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

57/79




AMOUNT



MAIN AND SUB-MAIN POWER

Sub-Main Circuit: supply , install , testing and commissioning

600/1000V XLPE multicore copper cable in conduit or cable

tray (measured elsewhere ) , including earth cable, junction

boxes, connection for feeders and various power loads as

shown on drawings and coordination & integration with other

systems shall be conducted during work execution as per

technical specifications, drawings and by making arrangement

with supervising engineer to achieve the work to the best

possible and specifications

01 4C-10mm2-CU/XLPE/PVC+10mm2G/ cable trench 236 M

02 4C-10mm2-CU/XLPE/PVC+10mm2G/ cable trench 5 M

03 4C-50mm2-CU/XLPE/PVC+25mm2G/ cable tray 682 M

04 4C-95mm2-CU/XLPE/PVC+50 mm2G / cable tray 10 M

05 4C-95 mm2-CU/XLPE/PVC+ 50 mm2G / cable trench 5 M

06 4C-95mm2-CU/XLPE/PVC+50mm2G/ 1 x110mm UPVC conduit 21 M

07 2(4C-120mm2-CU/XLPE/PVC)+120mm2G / cable tray 121 M


09 2(4C-150mm2-CU/XLPE/PVC)+150mm2G / cable trench 10 M

10 4C-185mm2-CU/XLPE/PVC+95mm2G / cable trench 10 M

11 2(4C-185mm2-CU/XLPE/PVC) / cable tray 12 M

12 4C-185mm2-CU/XLPE/PVC / 1 x110mm UPVC conduit 18 M

13 2(4C-185mm2-CU/XLPE/PVC) / 2 x110mm UPVC conduit 15 M



To Collection SR



57 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

58/79




AMOUNT




Sub-Main Circuit: supply , install , testing and commissioning

600/1000V XLPE multicore copper cable in conduit or cable

tray (measured elsewhere ) , including earth cable, junction

boxes, connection for feeders and various power loads as

shown on drawings and coordination & integration with other

systems shall be conducted during work execution as per

technical specifications, drawings and by making arrangement

with supervising engineer to achieve the work to the best

possible and specifications

01 4C-240mm2-CU/XLPE/PVC+120mm2G / cable tray 121 M

02 4C-240mm2-CU/XLPE/PVC+120mm2G / cable trench 5 M



05 4C-300mm2-CU/XLPE/PVC+150mm2G / cable tray 198 M

06 3(4X1C-630mm2)-CU/XLPE/PVC / cable trench 30 M

The following items listed below shown in drawing AP05 - E701 ,

AP07 - E701 &SF03 - E701(inside each apartment building

AP05, AP07 &SF03.)

07 4C-10mm2-CU/XLPE/PVC+10 mm2G/ cable tray 100 M

08 4C-10mm2-CU/XLPE/PVC+10mm2G/ 50mm UPVC conduit 100 M

09 4C-50mm+1C-25mmG-CU/XLPE/PVC/ cable tray 50 M

10 4C-70mm+1C-35mmG-CU/XLPE/PVC / cable tray 50 M

To Collection SR



58 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

59/79




AMOUNT




Supply and install an Emergency Power Generating Sets

including associated Generator Control Panel . In addition to

circuit breakers, pads, supports, controls, daily and diesel fuel

with necessary connections to earth as per the manufacture

including all necessary equipment, accessories and associated

works, as shown on drawings and as described in

specifications. sections

01. - , , , , , , .

1 No

02

. - , , , , , , .

1 No

03. - , , , , , , .

1 No

MAN / HAND HOLE

Supply, install, testing and commissioning reinforced concrete

manholes and hand holes connected via UPVC conduit,

complete with hand hole bolted type metal cover, drain pipe

outlet, including trenching and backfilling for UPVC conduits

for power and communication cables in UPVC conduit, tapes, ,

grounding, all as required to suit locations as shown on

drawings and coordination & integration with other systems

shall be conducted during work execution as per technicalspecifications, drawings and by making arrangement with


and specifications

04 Power manhole (1800x1800x1800mm) ( Ref.PMH). 14 No

05 Power hand hole (900x900x900mm) ( Ref.PHH). 3 No

To Collection SR



59 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

60/79




AMOUNT




Supply , install , testing and commissioning of panel boards

including grounding, circuit breakers, grounding, fixings,

markers units and all associated works as required and shown

on drawings and coordination & integration with other systems




and specifications

01 Ref. MDP-P1 1 No

02 Ref. DP51 5 No

03 Ref. DP52 5 No

04 Ref. DPS5 5 No

05 Ref. PPSD 5 No

06 Ref. DPSB1 1 No

07 Ref. PPSB1 1 No

08 Ref. SLP2B ( listed in bill of site lighting package ) 1 No NIC

09 Ref. EDPSB1 with ATS (built-in ) 1 No

10 Ref. EPSB1 1 No

11 Ref. EPMSB1 1 No

12 Ref. EPMSB1A 1 No

13 Ref. EMDP1 1 No

14 Ref. EDPS5 with ATS (built-in ) 5 No

15 Ref. EPSD 5 No

To Collection SR



60 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

61/79




AMOUNT











and specifications

01 Ref. MDP-P2 1 No

02 Ref. DP71 5 No

03 Ref. DPS7 5 No

04 Ref. EPSF 5 No

05 Ref. DP72 5 No

06 Ref. DPSB2 1 No

07 Ref. PPSB2 1 No

08 Ref. SLP2A ( listed in bill of site lighting package ) 1 No NIC

09 Ref. PPT 3 No

10 Ref. EDPSB2 with ATS (built-in ) 1 No

11 Ref. EPSB2 1 No

12 Ref. EPMSB2 1 No

13 Ref. EPMSB2A 1 No

14 Ref. EMDP2 1 No

15 Ref. EDPS7 with ATS (built-in ) 5 No

To Collection SR



61 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

62/79




AMOUNT











and specifications

01 Ref. EPSF 5 No

02 Ref. MDP-P3 1 No

03 Ref. EMDP3 1 No

04 Ref. MCC ( supplied and installed by others ) 1 No NIC

05 Ref. EPP1 1 No

06 Ref. EPP2 1 No

Supply , install , testing and commissioning of circuit breaker

including cables, conduits, fittings, supports, fixings, tapes,connections enclosures and all necessary works required to

suit the locations shown on drawings and coordination &

integration with other systems shall be conducted during work

execution as per technical specifications, drawings and by

making arrangement with supervising engineer to achieve the

work to the best possible and specifications

07 200AT /250AF Rating. 1 No

To Collection SR



62 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

63/79




AMOUNT




Sub-Main circuit :Supply , install, Power & Communication

distribution galvanized steel cable trays, including fittings,

supports and all accessories as described on drawing

Coordination with other disciplines shall be conducted during

work execution as per technical specifications, drawings and

by making arrangement with supervising engineer to achieve

the work to the best possible and specifications

01 200 mm wide 600 M

02 300 mm wide 1600 M

03 400 mm wide 150 M

04 400 mm wide double layer 200 M

05 600 mm wide 25 M

06 800 mm wide 50 M

07 800 mm wide double layer 140 M

08 900 mm wide 30 M

09 1000 mm wide 25 M

To Collection SR



63 / 79

REVISED PAGE

Date: MAY 2012

7/28/2019 CL02 (MAY 2012)

cl02 (may 2012)

Documents