civil aviation safety authority aircraft certification and delegation update dinh nguyen nz caa...
TRANSCRIPT
CIVIL AVIATION SAFETY AUTHORITY
Aircraft Certification and Delegation Update
Dinh Nguyen
NZ CAA Design Delegation Holders Seminar7th September 2007 Hamilton
CIVIL AVIATION SAFETY AUTHORITY
Topics
CASA Airworthiness Engineering Branch
Progress on CASR Part 146 Certification Delegation
Initiatives
CIVIL AVIATION SAFETY AUTHORITY
CASA Organisation Chart
CIVIL AVIATION SAFETY AUTHORITY
Airworthiness Engineering Branch
General Manager(Acting)
Jim Coyne
Airframe and Structures
David Villiers
Systems and New Technologies
(Acting)Charles Lenarcic
ManufacturingJohn Niarchos
Certification Policy and ProgramsDinh Nguyen
Maintenance (to be established)
Certification Policy
Certification Delegations
CertificationProjects
CIVIL AVIATION SAFETY AUTHORITY
Background for CASR Part 146 Currently CASA issue CAR 30 Certificate of
Approval for organisations to carry out design activities; and appoint individuals as authorised persons to approve designs:
modification and repair designs under CAR 35 changes in type design, type design data and
design data for APMA parts under CASR Part 21
CASR Part 146 is being developed under the CASA Regulatory Reform Plan to provide the rule for delegation of design approvals.
CIVIL AVIATION SAFETY AUTHORITY
Part 146 Engineering Representatives Provide rule for certification and operation of
ERs Two types of ERs:
Individuals – called Designated Engineering Representatives (DERs)
Organisations – called Organisation Engineering Representatives (OERs)
Holders of an ER certificate are delegated the power to perform design approval functions in accordance with the ER certificate
CIVIL AVIATION SAFETY AUTHORITY
Functions delegated to ERs Make findings of compliance with
applicable airworthiness standards Approve technical data Approve use of materials, processes
and parts Approve changes to AFMs Approve minor changes to type design Issue modification/repair design
approvals Issue limited STCs (restricted to OERs)
CIVIL AVIATION SAFETY AUTHORITY
Core DER qualifications and experience Qualification eligible for graduate member of
IEAust, or knowledge and experience acceptable to CASA
At least 8 years relevant experience - each year of completed tertiary course, up to a maximum of 4 years, taken to be 1 year experience.
Thorough knowledge of CASRs and related materials
Familiar with CASA procedures for issuing design approvals
At least 12 months working experience with CASA on aircraft certification matters in the last 3 years
CIVIL AVIATION SAFETY AUTHORITY
Designated Engineering Representatives A DER can only find compliance to
airworthiness standards within engineering specialties specified in his/her DER certificate.
A DER must have a Procedures Manual to include procedures for:
Independent checking of compliance data Classification of major/minor modifications
and repairs Liaising with and reporting to CASA Document and record control
CIVIL AVIATION SAFETY AUTHORITY
Organisation Engineering Representatives OERs provide a system approach to delegation of
design approval for manufacturers, design and maintenance organisations.
OERs must have suitable organisation and personnel:
Head of Design Approval Authorised Representatives (ARs)
OERs must have additional systems and procedures: Selection and appointment of ARs Internal audit Training
CIVIL AVIATION SAFETY AUTHORITY
CASR Part 146 Status
Development and consultation on Part 146 completed early 2006.
Due to other legal drafting priorities, final regulations not available until end of 2007.
CIVIL AVIATION SAFETY AUTHORITY
Certification Delegation Initiatives Apply Part 146 requirements to new
authorisations or additional scope to existing authorisations.
Standardise scope and conditions specified on instruments.
Change authorised person’s Procedures Manual to improve design approval process and compliance documentation.
Increase use of delegates for finding of compliance with airworthiness standards for type certification, STCs and APMAs.
CIVIL AVIATION SAFETY AUTHORITY
Delegation Initiatives Use risk-based audits. Improve communication with delegates -
next Certification and Manufacturing Seminar planned for 14-15 November 2007 in South East Queensland
Work with external providers to provide training – e.g. RMIT Design Approval and Airworthiness Regulations course
Develop advisory materials on design approval procedures and documentation.
CIVIL AVIATION SAFETY AUTHORITY
Thank you & Any questions?