cisco ccna routing and switching boot camp (ccnax ...€¦ · cisco ccna routing and switching boot...

CCNABC 2.0 www.globalknowledge.co.uk [email protected] 01189 123456

Cisco CCNA Routing and Switching Boot Camp (CCNAX - Accelerated)

Duration: 5 Days Course Code: CCNABC Version: 2.0 Delivery Method: Class Connect HD

Overview:

Our accelerated CCNA Boot Camp is an intensive program, designed to help you achieve your CCNA Routing and Switching certification in areduced period of time. To maximize your classroom experience and ensure that you get a comprehensive coverage of the CCNA Routing andSwitching materials, our three-step, blended learning approach to the CCNA Boot Camp consists of: Pre-Class Activity, Classroom Instructionand Post-Class Lab Practice.The Pre-Class Activity provides you with approximately ten hours of review materials and exercises, including a a pre-test assessment, all ofwhich is designed to give you a firm foundation and get you focused before you enter the classroom.Classroom Instruction includes intensive instructor-led training and hands-on labs, students will learn how to install, operate, configure, andverify a basic IPv4 and IPv6 network, including configuring a LAN switch, configuring an IP router, identifying basic security threats,understanding redundant topologies, troubleshooting common network issues, connecting to a WAN,configuring EIGRP and OSPF in both IPv4and IPv6, understanding wide-area network technologies, and getting familiar with device management and Cisco licensing. You will have24-hour lab access during the course. Following the course you will be provided with ten e-Lab credits, which can be used for additional Lab Practice allowing you to hone your skillsusing the same hands-on lab equipment you used in the classroom.

Please note this Boot Camp is scheduled to run from 09:30 to 19:00. Exact timings may vary.

Target Audience:

Individuals seeking the Cisco CCNA Routing and Switching certification. The course is also appropriate for pre-sales and post-sales networkengineers involved in the installation and support of enterprise branch office networks.

Objectives:

After you complete this course you should be able to: behind Layer 3 redundancy

Describe network fundamentals and build simple LANs

Troubleshoot IP connectivity

Establish Internet connectivity

Define the characteristics, functions, and components of a WAN

Manage network device security

Configure and troubleshoot EIGRP in an IPv4 environment, andconfigure EIGRP for IPv6

Describe IPv6 basics

Configure, verify, and troubleshoot multi-area OSPFTroubleshoot VLAN issues, explain how STP works, configureEtherChannel, and understand the idea

Describe SNMP, syslog and NetFlow, and manage Cisco deviceconfigurations, IOS images, and licenses

Prerequisites: Testing and Certification

Attendees should meet the following prerequisites before Recommended preparation for exam(s):attending our CCNA Routing and Switching Boot Camp:

200-120 - CCNA Cisco Certified Network Associate Routing and


Basic Windows navigation and keyboard literacy skills Switching Basic Internet usage skills Basic IP addressing knowledge

Follow-on-Courses:

The following Courses are recommended for further study:

ROUTE - Implementing Cisco IP RoutingSWITCH - Implementing Cisco Switched NetworksTSHOOT - Troubleshooting and Maintaining Cisco IP Networks


Content:

Building a Simple Networkline line line

Exploring the Functions of Networking Understanding the Host-to-Host Understanding the Host-to-HostCommunications Model Communications ModelIntroducing LANs Introducing LANs

line Operating Cisco IOS Software Operating Cisco IOS SoftwareUnderstanding the Host-to-Host Starting a Switch Starting a SwitchCommunications Model Understanding Ethernet and Switch Understanding Ethernet and SwitchIntroducing LANs Operation OperationOperating Cisco IOS Software Troubleshooting Common Switch Media Troubleshooting Common Switch MediaStarting a Switch Issues IssuesUnderstanding Ethernet and Switch Understanding IP Addressing and Understanding IP Addressing and SubnetsOperation Subnets Understanding the TCP/IP Transport LayerTroubleshooting Common Switch Media Understanding the TCP/IP Transport Exploring the Functions of RoutingIssues Layer Configuring a Cisco RouterUnderstanding IP Addressing and Subnets Exploring the Functions of Routing Exploring the Packet Delivery ProcessUnderstanding the TCP/IP Transport Layer Configuring a Cisco Router Enabling Static RoutingExploring the Functions of Routing Exploring the Packet Delivery Process Managing Traffic Using ACLsConfiguring a Cisco Router Enabling Static Routing Enabling Internet ConnectivityExploring the Packet Delivery Process Managing Traffic Using ACLs Implementing Device HardeningEnabling Static Routing Enabling Internet Connectivity Implementing Traffic Filtering with ACLs Managing Traffic Using ACLs Implementing Device Hardening Understanding IPv6Enabling Internet Connectivity Implementing Traffic Filtering with ACLs Configuring IPv6 RoutingImplementing Device Hardening Understanding IPv6 Routing Between VLANsImplementing Traffic Filtering with ACLs Configuring IPv6 Routing Using a Cisco Network Device as a DHCPUnderstanding IPv6 Routing Between VLANs ServerConfiguring IPv6 Routing Using a Cisco Network Device as a Troubleshooting VLAN ConnectivityRouting Between VLANs DHCP Server Building Redundant Switched TopologiesUsing a Cisco Network Device as a DHCP Troubleshooting VLAN Connectivity Improving Redundant Switched TopologiesServer Building Redundant Switched Topologies with EtherChannelTroubleshooting VLAN Connectivity Improving Redundant Switched Understanding Layer 3 RedundancyBuilding Redundant Switched Topologies Topologies with EtherChannel Troubleshooting IPv6 Network ConnectivityImproving Redundant Switched Topologies Understanding Layer 3 Redundancy Configuring Serial Encapsulationwith EtherChannel Troubleshooting IPv6 Network Establishing a WAN Connection UsingUnderstanding Layer 3 Redundancy Connectivity Frame RelayTroubleshooting IPv6 Network Connectivity Configuring Serial Encapsulation Introducing VPN SolutionsConfiguring Serial Encapsulation Establishing a WAN Connection Using Configuring GRE Tunnels Establishing a WAN Connection Using Frame Relay Troubleshooting EIGRPFrame Relay Introducing VPN Solutions Implementing EIGRP for IPv6 Introducing VPN Solutions Configuring GRE Tunnels Multiarea OSPF IPv4 ImplementationConfiguring GRE Tunnels Troubleshooting EIGRP Troubleshooting Multiarea OSPFTroubleshooting EIGRP Implementing EIGRP for IPv6 Examining OSPFv3 Implementing EIGRP for IPv6 Multiarea OSPF IPv4 Implementation Managing Cisco DevicesMultiarea OSPF IPv4 Implementation Troubleshooting Multiarea OSPF LicensingTroubleshooting Multiarea OSPF Examining OSPFv3 Lab 1-2: Troubleshooting Switch MediaExamining OSPFv3 Managing Cisco Devices IssuesManaging Cisco Devices Licensing Lab 2-1: Performing Initial Router SetupLicensing Lab 1-2: Troubleshooting Switch Media and ConfigurationLab 1-2: Troubleshooting Switch Media Issues Lab 2-2: Connecting to the InternetIssues Lab 2-1: Performing Initial Router Setup Lab 3-1: Enhancing the Security of theLab 2-1: Performing Initial Router Setup and and Configuration Initial ConfigurationConfiguration Lab 2-2: Connecting to the Internet Lab 3-2: Device HardeningLab 2-2: Connecting to the Internet Lab 3-1: Enhancing the Security of the Lab 3-3: Filtering Traffic with ACLsLab 3-1: Enhancing the Security of the Initial Initial Configuration Lab 4-1: Configure and Verify Basic IPv6Configuration Lab 3-2: Device Hardening Lab 4-2: Configure and Verify StatelessLab 3-2: Device Hardening Lab 3-3: Filtering Traffic with ACLs AutoconfigurationLab 3-3: Filtering Traffic with ACLs Lab 4-1: Configure and Verify Basic IPv6 Lab 4-3: Configure and Verify IPv6 RoutingLab 4-1: Configure and Verify Basic IPv6 Lab 4-2: Configure and Verify Stateless Lab 5-1: Configuring Expanded SwitchedLab 4-2: Configure and Verify Stateless Autoconfiguration NetworksAutoconfiguration Lab 4-3: Configure and Verify IPv6 Lab 5-2: Configuring DHCP ServerLab 4-3: Configure and Verify IPv6 Routing Routing Lab 5-3: Troubleshooting VLANs andLab 5-1: Configuring Expanded Switched Lab 5-1: Configuring Expanded Switched TrunksNetworks Networks Lab 5-4: Optimizing STPLab 5-2: Configuring DHCP Server Lab 5-2: Configuring DHCP Server Lab 5-5: Configuring EtherChannel


Lab 5-3: Troubleshooting VLANs and Trunks Lab 5-3: Troubleshooting VLANs and Lab 6-1: Troubleshooting IP ConnectivityLab 5-4: Optimizing STP Trunks Lab 7-1: Configuring and TroubleshootingLab 5-5: Configuring EtherChannel Lab 5-4: Optimizing STP a Serial ConnectionLab 6-1: Troubleshooting IP Connectivity Lab 5-5: Configuring EtherChannel Lab 7-2: Establishing a Frame Relay WANLab 7-1: Configuring and Troubleshooting a Lab 6-1: Troubleshooting IP Connectivity Lab 7-3: Establishing a GRE TunnelSerial Connection Lab 7-1: Configuring and Troubleshooting Lab 8-1: Implementing EIGRPLab 7-2: Establishing a Frame Relay WAN a Serial Connection Lab 8-2: Troubleshooting EIGRPLab 7-3: Establishing a GRE Tunnel Lab 7-2: Establishing a Frame Relay Lab 8-3: Implementing EIGRP for IPv6Lab 8-1: Implementing EIGRP WAN Lab 9-1: Implementing OSPFLab 8-2: Troubleshooting EIGRP Lab 7-3: Establishing a GRE Tunnel Lab 9-2: Configuring Multiarea OSPFLab 8-3: Implementing EIGRP for IPv6 Lab 8-1: Implementing EIGRP Lab 9-3: Troubleshooting Multiarea OSPFLab 9-1: Implementing OSPF Lab 8-2: Troubleshooting EIGRP Lab 9-4: Configuring OSPF for IPv6Lab 9-2: Configuring Multiarea OSPF Lab 8-3: Implementing EIGRP for IPv6 Lab 10-1: SNMP and Syslog BasicLab 9-3: Troubleshooting Multiarea OSPF Lab 9-1: Implementing OSPF ConfigurationLab 9-4: Configuring OSPF for IPv6 Lab 9-2: Configuring Multiarea OSPF Lab 10-2: Analyzing NetFlow DataLab 10-1: SNMP and Syslog Basic Lab 9-3: Troubleshooting Multiarea OSPF Lab 10-3: Managing Cisco Devices andConfiguration Lab 9-4: Configuring OSPF for IPv6 LicensingLab 10-2: Analyzing NetFlow Data Lab 10-1: SNMP and Syslog BasicLab 10-3: Managing Cisco Devices and ConfigurationLicensing Lab 10-2: Analyzing NetFlow Data line

Lab 10-3: Managing Cisco Devices and Understanding the Host-to-HostLicensing Communications Model

line Introducing LANsUnderstanding the Host-to-Host Operating Cisco IOS SoftwareCommunications Model line Starting a SwitchIntroducing LANs Understanding the Host-to-Host Understanding Ethernet and SwitchOperating Cisco IOS Software Communications Model OperationStarting a Switch Introducing LANs Troubleshooting Common Switch MediaUnderstanding Ethernet and Switch Operating Cisco IOS Software IssuesOperation Starting a Switch Understanding IP Addressing and SubnetsTroubleshooting Common Switch Media Understanding Ethernet and Switch Understanding the TCP/IP Transport LayerIssues Operation Exploring the Functions of RoutingUnderstanding IP Addressing and Subnets Troubleshooting Common Switch Media Configuring a Cisco RouterUnderstanding the TCP/IP Transport Layer Issues Exploring the Packet Delivery ProcessExploring the Functions of Routing Understanding IP Addressing and Enabling Static RoutingConfiguring a Cisco Router Subnets Managing Traffic Using ACLsExploring the Packet Delivery Process Understanding the TCP/IP Transport Enabling Internet ConnectivityEnabling Static Routing Layer Implementing Device HardeningManaging Traffic Using ACLs Exploring the Functions of Routing Implementing Traffic Filtering with ACLs Enabling Internet Connectivity Configuring a Cisco Router Understanding IPv6Implementing Device Hardening Exploring the Packet Delivery Process Configuring IPv6 RoutingImplementing Traffic Filtering with ACLs Enabling Static Routing Routing Between VLANsUnderstanding IPv6 Managing Traffic Using ACLs Using a Cisco Network Device as a DHCPConfiguring IPv6 Routing Enabling Internet Connectivity ServerRouting Between VLANs Implementing Device Hardening Troubleshooting VLAN ConnectivityUsing a Cisco Network Device as a DHCP Implementing Traffic Filtering with ACLs Building Redundant Switched TopologiesServer Understanding IPv6 Improving Redundant Switched TopologiesTroubleshooting VLAN Connectivity Configuring IPv6 Routing with EtherChannelBuilding Redundant Switched Topologies Routing Between VLANs Understanding Layer 3 RedundancyImproving Redundant Switched Topologies Using a Cisco Network Device as a Troubleshooting IPv6 Network Connectivitywith EtherChannel DHCP Server Configuring Serial EncapsulationUnderstanding Layer 3 Redundancy Troubleshooting VLAN Connectivity Establishing a WAN Connection UsingTroubleshooting IPv6 Network Connectivity Building Redundant Switched Topologies Frame RelayConfiguring Serial Encapsulation Improving Redundant Switched Introducing VPN SolutionsEstablishing a WAN Connection Using Topologies with EtherChannel Configuring GRE Tunnels Frame Relay Understanding Layer 3 Redundancy Troubleshooting EIGRPIntroducing VPN Solutions Troubleshooting IPv6 Network Implementing EIGRP for IPv6 Configuring GRE Tunnels Connectivity Multiarea OSPF IPv4 ImplementationTroubleshooting EIGRP Configuring Serial Encapsulation Troubleshooting Multiarea OSPFImplementing EIGRP for IPv6 Establishing a WAN Connection Using Examining OSPFv3 Multiarea OSPF IPv4 Implementation Frame Relay Managing Cisco DevicesTroubleshooting Multiarea OSPF Introducing VPN Solutions LicensingExamining OSPFv3 Configuring GRE Tunnels Lab 1-2: Troubleshooting Switch MediaManaging Cisco Devices Troubleshooting EIGRP IssuesLicensing Implementing EIGRP for IPv6 Lab 2-1: Performing Initial Router SetupLab 1-2: Troubleshooting Switch Media Multiarea OSPF IPv4 Implementation and Configuration


Issues Troubleshooting Multiarea OSPF Lab 2-2: Connecting to the InternetLab 2-1: Performing Initial Router Setup and Examining OSPFv3 Lab 3-1: Enhancing the Security of theConfiguration Managing Cisco Devices Initial ConfigurationLab 2-2: Connecting to the Internet Licensing Lab 3-2: Device HardeningLab 3-1: Enhancing the Security of the Initial Lab 1-2: Troubleshooting Switch Media Lab 3-3: Filtering Traffic with ACLsConfiguration Issues Lab 4-1: Configure and Verify Basic IPv6Lab 3-2: Device Hardening Lab 2-1: Performing Initial Router Setup Lab 4-2: Configure and Verify StatelessLab 3-3: Filtering Traffic with ACLs and Configuration AutoconfigurationLab 4-1: Configure and Verify Basic IPv6 Lab 2-2: Connecting to the Internet Lab 4-3: Configure and Verify IPv6 RoutingLab 4-2: Configure and Verify Stateless Lab 3-1: Enhancing the Security of the Lab 5-1: Configuring Expanded SwitchedAutoconfiguration Initial Configuration NetworksLab 4-3: Configure and Verify IPv6 Routing Lab 3-2: Device Hardening Lab 5-2: Configuring DHCP ServerLab 5-1: Configuring Expanded Switched Lab 3-3: Filtering Traffic with ACLs Lab 5-3: Troubleshooting VLANs andNetworks Lab 4-1: Configure and Verify Basic IPv6 TrunksLab 5-2: Configuring DHCP Server Lab 4-2: Configure and Verify Stateless Lab 5-4: Optimizing STPLab 5-3: Troubleshooting VLANs and Trunks Autoconfiguration Lab 5-5: Configuring EtherChannelLab 5-4: Optimizing STP Lab 4-3: Configure and Verify IPv6 Lab 6-1: Troubleshooting IP ConnectivityLab 5-5: Configuring EtherChannel Routing Lab 7-1: Configuring and TroubleshootingLab 6-1: Troubleshooting IP Connectivity Lab 5-1: Configuring Expanded Switched a Serial ConnectionLab 7-1: Configuring and Troubleshooting a Networks Lab 7-2: Establishing a Frame Relay WANSerial Connection Lab 5-2: Configuring DHCP Server Lab 7-3: Establishing a GRE TunnelLab 7-2: Establishing a Frame Relay WAN Lab 5-3: Troubleshooting VLANs and Lab 8-1: Implementing EIGRPLab 7-3: Establishing a GRE Tunnel Trunks Lab 8-2: Troubleshooting EIGRPLab 8-1: Implementing EIGRP Lab 5-4: Optimizing STP Lab 8-3: Implementing EIGRP for IPv6Lab 8-2: Troubleshooting EIGRP Lab 5-5: Configuring EtherChannel Lab 9-1: Implementing OSPFLab 8-3: Implementing EIGRP for IPv6 Lab 6-1: Troubleshooting IP Connectivity Lab 9-2: Configuring Multiarea OSPFLab 9-1: Implementing OSPF Lab 7-1: Configuring and Troubleshooting Lab 9-3: Troubleshooting Multiarea OSPFLab 9-2: Configuring Multiarea OSPF a Serial Connection Lab 9-4: Configuring OSPF for IPv6Lab 9-3: Troubleshooting Multiarea OSPF Lab 7-2: Establishing a Frame Relay Lab 10-1: SNMP and Syslog BasicLab 9-4: Configuring OSPF for IPv6 WAN ConfigurationLab 10-1: SNMP and Syslog Basic Lab 7-3: Establishing a GRE Tunnel Lab 10-2: Analyzing NetFlow DataConfiguration Lab 8-1: Implementing EIGRP Lab 10-3: Managing Cisco Devices andLab 10-2: Analyzing NetFlow Data Lab 8-2: Troubleshooting EIGRP LicensingLab 10-3: Managing Cisco Devices and Lab 8-3: Implementing EIGRP for IPv6Licensing Lab 9-1: Implementing OSPF

Lab 9-2: Configuring Multiarea OSPF lineLab 9-3: Troubleshooting Multiarea OSPF Understanding the Host-to-Host

line Lab 9-4: Configuring OSPF for IPv6 Communications ModelUnderstanding the Host-to-Host Lab 10-1: SNMP and Syslog Basic Introducing LANsCommunications Model Configuration Operating Cisco IOS SoftwareIntroducing LANs Lab 10-2: Analyzing NetFlow Data Starting a SwitchOperating Cisco IOS Software Lab 10-3: Managing Cisco Devices and Understanding Ethernet and SwitchStarting a Switch Licensing OperationUnderstanding Ethernet and Switch Troubleshooting Common Switch MediaOperation IssuesTroubleshooting Common Switch Media line Understanding IP Addressing and SubnetsIssues Understanding the Host-to-Host Understanding the TCP/IP Transport LayerUnderstanding IP Addressing and Subnets Communications Model Exploring the Functions of RoutingUnderstanding the TCP/IP Transport Layer Introducing LANs Configuring a Cisco RouterExploring the Functions of Routing Operating Cisco IOS Software Exploring the Packet Delivery ProcessConfiguring a Cisco Router Starting a Switch Enabling Static RoutingExploring the Packet Delivery Process Understanding Ethernet and Switch Managing Traffic Using ACLsEnabling Static Routing Operation Enabling Internet ConnectivityManaging Traffic Using ACLs Troubleshooting Common Switch Media Implementing Device HardeningEnabling Internet Connectivity Issues Implementing Traffic Filtering with ACLs Implementing Device Hardening Understanding IP Addressing and Understanding IPv6Implementing Traffic Filtering with ACLs Subnets Configuring IPv6 RoutingUnderstanding IPv6 Understanding the TCP/IP Transport Routing Between VLANsConfiguring IPv6 Routing Layer Using a Cisco Network Device as a DHCPRouting Between VLANs Exploring the Functions of Routing ServerUsing a Cisco Network Device as a DHCP Configuring a Cisco Router Troubleshooting VLAN ConnectivityServer Exploring the Packet Delivery Process Building Redundant Switched TopologiesTroubleshooting VLAN Connectivity Enabling Static Routing Improving Redundant Switched TopologiesBuilding Redundant Switched Topologies Managing Traffic Using ACLs with EtherChannelImproving Redundant Switched Topologies Enabling Internet Connectivity Understanding Layer 3 Redundancywith EtherChannel Implementing Device Hardening Troubleshooting IPv6 Network Connectivity


Understanding Layer 3 Redundancy Implementing Traffic Filtering with ACLs Configuring Serial EncapsulationTroubleshooting IPv6 Network Connectivity Understanding IPv6 Establishing a WAN Connection UsingConfiguring Serial Encapsulation Configuring IPv6 Routing Frame RelayEstablishing a WAN Connection Using Routing Between VLANs Introducing VPN SolutionsFrame Relay Using a Cisco Network Device as a Configuring GRE Tunnels Introducing VPN Solutions DHCP Server Troubleshooting EIGRPConfiguring GRE Tunnels Troubleshooting VLAN Connectivity Implementing EIGRP for IPv6 Troubleshooting EIGRP Building Redundant Switched Topologies Multiarea OSPF IPv4 ImplementationImplementing EIGRP for IPv6 Improving Redundant Switched Troubleshooting Multiarea OSPFMultiarea OSPF IPv4 Implementation Topologies with EtherChannel Examining OSPFv3 Troubleshooting Multiarea OSPF Understanding Layer 3 Redundancy Managing Cisco DevicesExamining OSPFv3 Troubleshooting IPv6 Network LicensingManaging Cisco Devices Connectivity Lab 1-2: Troubleshooting Switch MediaLicensing Configuring Serial Encapsulation IssuesLab 1-2: Troubleshooting Switch Media Establishing a WAN Connection Using Lab 2-1: Performing Initial Router SetupIssues Frame Relay and ConfigurationLab 2-1: Performing Initial Router Setup and Introducing VPN Solutions Lab 2-2: Connecting to the InternetConfiguration Configuring GRE Tunnels Lab 3-1: Enhancing the Security of theLab 2-2: Connecting to the Internet Troubleshooting EIGRP Initial ConfigurationLab 3-1: Enhancing the Security of the Initial Implementing EIGRP for IPv6 Lab 3-2: Device HardeningConfiguration Multiarea OSPF IPv4 Implementation Lab 3-3: Filtering Traffic with ACLsLab 3-2: Device Hardening Troubleshooting Multiarea OSPF Lab 4-1: Configure and Verify Basic IPv6Lab 3-3: Filtering Traffic with ACLs Examining OSPFv3 Lab 4-2: Configure and Verify StatelessLab 4-1: Configure and Verify Basic IPv6 Managing Cisco Devices AutoconfigurationLab 4-2: Configure and Verify Stateless Licensing Lab 4-3: Configure and Verify IPv6 RoutingAutoconfiguration Lab 1-2: Troubleshooting Switch Media Lab 5-1: Configuring Expanded SwitchedLab 4-3: Configure and Verify IPv6 Routing Issues NetworksLab 5-1: Configuring Expanded Switched Lab 2-1: Performing Initial Router Setup Lab 5-2: Configuring DHCP ServerNetworks and Configuration Lab 5-3: Troubleshooting VLANs andLab 5-2: Configuring DHCP Server Lab 2-2: Connecting to the Internet TrunksLab 5-3: Troubleshooting VLANs and Trunks Lab 3-1: Enhancing the Security of the Lab 5-4: Optimizing STPLab 5-4: Optimizing STP Initial Configuration Lab 5-5: Configuring EtherChannelLab 5-5: Configuring EtherChannel Lab 3-2: Device Hardening Lab 6-1: Troubleshooting IP ConnectivityLab 6-1: Troubleshooting IP Connectivity Lab 3-3: Filtering Traffic with ACLs Lab 7-1: Configuring and TroubleshootingLab 7-1: Configuring and Troubleshooting a Lab 4-1: Configure and Verify Basic IPv6 a Serial ConnectionSerial Connection Lab 4-2: Configure and Verify Stateless Lab 7-2: Establishing a Frame Relay WANLab 7-2: Establishing a Frame Relay WAN Autoconfiguration Lab 7-3: Establishing a GRE TunnelLab 7-3: Establishing a GRE Tunnel Lab 4-3: Configure and Verify IPv6 Lab 8-1: Implementing EIGRPLab 8-1: Implementing EIGRP Routing Lab 8-2: Troubleshooting EIGRPLab 8-2: Troubleshooting EIGRP Lab 5-1: Configuring Expanded Switched Lab 8-3: Implementing EIGRP for IPv6Lab 8-3: Implementing EIGRP for IPv6 Networks Lab 9-1: Implementing OSPFLab 9-1: Implementing OSPF Lab 5-2: Configuring DHCP Server Lab 9-2: Configuring Multiarea OSPFLab 9-2: Configuring Multiarea OSPF Lab 5-3: Troubleshooting VLANs and Lab 9-3: Troubleshooting Multiarea OSPFLab 9-3: Troubleshooting Multiarea OSPF Trunks Lab 9-4: Configuring OSPF for IPv6Lab 9-4: Configuring OSPF for IPv6 Lab 5-4: Optimizing STP Lab 10-1: SNMP and Syslog BasicLab 10-1: SNMP and Syslog Basic Lab 5-5: Configuring EtherChannel ConfigurationConfiguration Lab 6-1: Troubleshooting IP Connectivity Lab 10-2: Analyzing NetFlow DataLab 10-2: Analyzing NetFlow Data Lab 7-1: Configuring and Troubleshooting Lab 10-3: Managing Cisco Devices andLab 10-3: Managing Cisco Devices and a Serial Connection LicensingLicensing Lab 7-2: Establishing a Frame Relay

WANLab 7-3: Establishing a GRE Tunnel line

line Lab 8-1: Implementing EIGRP Understanding the Host-to-HostUnderstanding the Host-to-Host Lab 8-2: Troubleshooting EIGRP Communications ModelCommunications Model Lab 8-3: Implementing EIGRP for IPv6 Introducing LANsIntroducing LANs Lab 9-1: Implementing OSPF Operating Cisco IOS SoftwareOperating Cisco IOS Software Lab 9-2: Configuring Multiarea OSPF Starting a SwitchStarting a Switch Lab 9-3: Troubleshooting Multiarea OSPF Understanding Ethernet and SwitchUnderstanding Ethernet and Switch Lab 9-4: Configuring OSPF for IPv6 OperationOperation Lab 10-1: SNMP and Syslog Basic Troubleshooting Common Switch MediaTroubleshooting Common Switch Media Configuration IssuesIssues Lab 10-2: Analyzing NetFlow Data Understanding IP Addressing and SubnetsUnderstanding IP Addressing and Subnets Lab 10-3: Managing Cisco Devices and Understanding the TCP/IP Transport LayerUnderstanding the TCP/IP Transport Layer Licensing Exploring the Functions of RoutingExploring the Functions of Routing Configuring a Cisco RouterConfiguring a Cisco Router Troubleshooting Basic Connectivity Exploring the Packet Delivery Process


Exploring the Packet Delivery Process line Enabling Static RoutingEnabling Static Routing Troubleshooting IPv4 Network Managing Traffic Using ACLsManaging Traffic Using ACLs Connectivity Enabling Internet ConnectivityEnabling Internet Connectivity Implementing Device HardeningImplementing Device Hardening Implementing Traffic Filtering with ACLs Implementing Traffic Filtering with ACLs line Understanding IPv6Understanding IPv6 Understanding the Host-to-Host Configuring IPv6 RoutingConfiguring IPv6 Routing Communications Model Routing Between VLANsRouting Between VLANs Introducing LANs Using a Cisco Network Device as a DHCPUsing a Cisco Network Device as a DHCP Operating Cisco IOS Software ServerServer Starting a Switch Troubleshooting VLAN ConnectivityTroubleshooting VLAN Connectivity Understanding Ethernet and Switch Building Redundant Switched TopologiesBuilding Redundant Switched Topologies Operation Improving Redundant Switched TopologiesImproving Redundant Switched Topologies Troubleshooting Common Switch Media with EtherChannelwith EtherChannel Issues Understanding Layer 3 RedundancyUnderstanding Layer 3 Redundancy Understanding IP Addressing and Troubleshooting IPv6 Network ConnectivityTroubleshooting IPv6 Network Connectivity Subnets Configuring Serial EncapsulationConfiguring Serial Encapsulation Understanding the TCP/IP Transport Establishing a WAN Connection UsingEstablishing a WAN Connection Using Layer Frame RelayFrame Relay Exploring the Functions of Routing Introducing VPN SolutionsIntroducing VPN Solutions Configuring a Cisco Router Configuring GRE Tunnels Configuring GRE Tunnels Exploring the Packet Delivery Process Troubleshooting EIGRPTroubleshooting EIGRP Enabling Static Routing Implementing EIGRP for IPv6 Implementing EIGRP for IPv6 Managing Traffic Using ACLs Multiarea OSPF IPv4 ImplementationMultiarea OSPF IPv4 Implementation Enabling Internet Connectivity Troubleshooting Multiarea OSPFTroubleshooting Multiarea OSPF Implementing Device Hardening Examining OSPFv3 Examining OSPFv3 Implementing Traffic Filtering with ACLs Managing Cisco DevicesManaging Cisco Devices Understanding IPv6 LicensingLicensing Configuring IPv6 Routing Lab 1-2: Troubleshooting Switch MediaLab 1-2: Troubleshooting Switch Media Routing Between VLANs IssuesIssues Using a Cisco Network Device as a Lab 2-1: Performing Initial Router SetupLab 2-1: Performing Initial Router Setup and DHCP Server and ConfigurationConfiguration Troubleshooting VLAN Connectivity Lab 2-2: Connecting to the InternetLab 2-2: Connecting to the Internet Building Redundant Switched Topologies Lab 3-1: Enhancing the Security of theLab 3-1: Enhancing the Security of the Initial Improving Redundant Switched Initial ConfigurationConfiguration Topologies with EtherChannel Lab 3-2: Device HardeningLab 3-2: Device Hardening Understanding Layer 3 Redundancy Lab 3-3: Filtering Traffic with ACLsLab 3-3: Filtering Traffic with ACLs Troubleshooting IPv6 Network Lab 4-1: Configure and Verify Basic IPv6Lab 4-1: Configure and Verify Basic IPv6 Connectivity Lab 4-2: Configure and Verify StatelessLab 4-2: Configure and Verify Stateless Configuring Serial Encapsulation AutoconfigurationAutoconfiguration Establishing a WAN Connection Using Lab 4-3: Configure and Verify IPv6 RoutingLab 4-3: Configure and Verify IPv6 Routing Frame Relay Lab 5-1: Configuring Expanded SwitchedLab 5-1: Configuring Expanded Switched Introducing VPN Solutions NetworksNetworks Configuring GRE Tunnels Lab 5-2: Configuring DHCP ServerLab 5-2: Configuring DHCP Server Troubleshooting EIGRP Lab 5-3: Troubleshooting VLANs andLab 5-3: Troubleshooting VLANs and Trunks Implementing EIGRP for IPv6 TrunksLab 5-4: Optimizing STP Multiarea OSPF IPv4 Implementation Lab 5-4: Optimizing STPLab 5-5: Configuring EtherChannel Troubleshooting Multiarea OSPF Lab 5-5: Configuring EtherChannelLab 6-1: Troubleshooting IP Connectivity Examining OSPFv3 Lab 6-1: Troubleshooting IP ConnectivityLab 7-1: Configuring and Troubleshooting a Managing Cisco Devices Lab 7-1: Configuring and TroubleshootingSerial Connection Licensing a Serial ConnectionLab 7-2: Establishing a Frame Relay WAN Lab 1-2: Troubleshooting Switch Media Lab 7-2: Establishing a Frame Relay WANLab 7-3: Establishing a GRE Tunnel Issues Lab 7-3: Establishing a GRE TunnelLab 8-1: Implementing EIGRP Lab 2-1: Performing Initial Router Setup Lab 8-1: Implementing EIGRPLab 8-2: Troubleshooting EIGRP and Configuration Lab 8-2: Troubleshooting EIGRPLab 8-3: Implementing EIGRP for IPv6 Lab 2-2: Connecting to the Internet Lab 8-3: Implementing EIGRP for IPv6Lab 9-1: Implementing OSPF Lab 3-1: Enhancing the Security of the Lab 9-1: Implementing OSPFLab 9-2: Configuring Multiarea OSPF Initial Configuration Lab 9-2: Configuring Multiarea OSPFLab 9-3: Troubleshooting Multiarea OSPF Lab 3-2: Device Hardening Lab 9-3: Troubleshooting Multiarea OSPFLab 9-4: Configuring OSPF for IPv6 Lab 3-3: Filtering Traffic with ACLs Lab 9-4: Configuring OSPF for IPv6Lab 10-1: SNMP and Syslog Basic Lab 4-1: Configure and Verify Basic IPv6 Lab 10-1: SNMP and Syslog BasicConfiguration Lab 4-2: Configure and Verify Stateless ConfigurationLab 10-2: Analyzing NetFlow Data Autoconfiguration Lab 10-2: Analyzing NetFlow DataLab 10-3: Managing Cisco Devices and Lab 4-3: Configure and Verify IPv6 Lab 10-3: Managing Cisco Devices andLicensing Routing Licensing

Lab 5-1: Configuring Expanded Switched


Networksline Lab 5-2: Configuring DHCP Server line

Understanding the Host-to-Host Lab 5-3: Troubleshooting VLANs and Understanding the Host-to-HostCommunications Model Trunks Communications ModelIntroducing LANs Lab 5-4: Optimizing STP Introducing LANsOperating Cisco IOS Software Lab 5-5: Configuring EtherChannel Operating Cisco IOS SoftwareStarting a Switch Lab 6-1: Troubleshooting IP Connectivity Starting a SwitchUnderstanding Ethernet and Switch Lab 7-1: Configuring and Troubleshooting Understanding Ethernet and SwitchOperation a Serial Connection OperationTroubleshooting Common Switch Media Lab 7-2: Establishing a Frame Relay Troubleshooting Common Switch MediaIssues WAN IssuesUnderstanding IP Addressing and Subnets Lab 7-3: Establishing a GRE Tunnel Understanding IP Addressing and SubnetsUnderstanding the TCP/IP Transport Layer Lab 8-1: Implementing EIGRP Understanding the TCP/IP Transport LayerExploring the Functions of Routing Lab 8-2: Troubleshooting EIGRP Exploring the Functions of RoutingConfiguring a Cisco Router Lab 8-3: Implementing EIGRP for IPv6 Configuring a Cisco RouterExploring the Packet Delivery Process Lab 9-1: Implementing OSPF Exploring the Packet Delivery ProcessEnabling Static Routing Lab 9-2: Configuring Multiarea OSPF Enabling Static RoutingManaging Traffic Using ACLs Lab 9-3: Troubleshooting Multiarea OSPF Managing Traffic Using ACLsEnabling Internet Connectivity Lab 9-4: Configuring OSPF for IPv6 Enabling Internet ConnectivityImplementing Device Hardening Lab 10-1: SNMP and Syslog Basic Implementing Device HardeningImplementing Traffic Filtering with ACLs Configuration Implementing Traffic Filtering with ACLs Understanding IPv6 Lab 10-2: Analyzing NetFlow Data Understanding IPv6Configuring IPv6 Routing Lab 10-3: Managing Cisco Devices and Configuring IPv6 RoutingRouting Between VLANs Licensing Routing Between VLANsUsing a Cisco Network Device as a DHCP Using a Cisco Network Device as a DHCPServer Wide Area Networks ServerTroubleshooting VLAN Connectivity line Troubleshooting VLAN ConnectivityBuilding Redundant Switched Topologies Understanding WAN Technologies Building Redundant Switched TopologiesImproving Redundant Switched Topologies Improving Redundant Switched Topologieswith EtherChannel with EtherChannelUnderstanding Layer 3 Redundancy line Understanding Layer 3 RedundancyTroubleshooting IPv6 Network Connectivity Understanding the Host-to-Host Troubleshooting IPv6 Network ConnectivityConfiguring Serial Encapsulation Communications Model Configuring Serial EncapsulationEstablishing a WAN Connection Using Introducing LANs Establishing a WAN Connection UsingFrame Relay Operating Cisco IOS Software Frame RelayIntroducing VPN Solutions Starting a Switch Introducing VPN SolutionsConfiguring GRE Tunnels Understanding Ethernet and Switch Configuring GRE Tunnels Troubleshooting EIGRP Operation Troubleshooting EIGRPImplementing EIGRP for IPv6 Troubleshooting Common Switch Media Implementing EIGRP for IPv6 Multiarea OSPF IPv4 Implementation Issues Multiarea OSPF IPv4 ImplementationTroubleshooting Multiarea OSPF Understanding IP Addressing and Troubleshooting Multiarea OSPFExamining OSPFv3 Subnets Examining OSPFv3 Managing Cisco Devices Understanding the TCP/IP Transport Managing Cisco DevicesLicensing Layer LicensingLab 1-2: Troubleshooting Switch Media Exploring the Functions of Routing Lab 1-2: Troubleshooting Switch MediaIssues Configuring a Cisco Router IssuesLab 2-1: Performing Initial Router Setup and Exploring the Packet Delivery Process Lab 2-1: Performing Initial Router SetupConfiguration Enabling Static Routing and ConfigurationLab 2-2: Connecting to the Internet Managing Traffic Using ACLs Lab 2-2: Connecting to the InternetLab 3-1: Enhancing the Security of the Initial Enabling Internet Connectivity Lab 3-1: Enhancing the Security of theConfiguration Implementing Device Hardening Initial ConfigurationLab 3-2: Device Hardening Implementing Traffic Filtering with ACLs Lab 3-2: Device HardeningLab 3-3: Filtering Traffic with ACLs Understanding IPv6 Lab 3-3: Filtering Traffic with ACLsLab 4-1: Configure and Verify Basic IPv6 Configuring IPv6 Routing Lab 4-1: Configure and Verify Basic IPv6Lab 4-2: Configure and Verify Stateless Routing Between VLANs Lab 4-2: Configure and Verify StatelessAutoconfiguration Using a Cisco Network Device as a AutoconfigurationLab 4-3: Configure and Verify IPv6 Routing DHCP Server Lab 4-3: Configure and Verify IPv6 RoutingLab 5-1: Configuring Expanded Switched Troubleshooting VLAN Connectivity Lab 5-1: Configuring Expanded SwitchedNetworks Building Redundant Switched Topologies NetworksLab 5-2: Configuring DHCP Server Improving Redundant Switched Lab 5-2: Configuring DHCP ServerLab 5-3: Troubleshooting VLANs and Trunks Topologies with EtherChannel Lab 5-3: Troubleshooting VLANs andLab 5-4: Optimizing STP Understanding Layer 3 Redundancy TrunksLab 5-5: Configuring EtherChannel Troubleshooting IPv6 Network Lab 5-4: Optimizing STPLab 6-1: Troubleshooting IP Connectivity Connectivity Lab 5-5: Configuring EtherChannelLab 7-1: Configuring and Troubleshooting a Configuring Serial Encapsulation Lab 6-1: Troubleshooting IP ConnectivitySerial Connection Establishing a WAN Connection Using Lab 7-1: Configuring and Troubleshooting


Lab 7-2: Establishing a Frame Relay WAN Frame Relay a Serial ConnectionLab 7-3: Establishing a GRE Tunnel Introducing VPN Solutions Lab 7-2: Establishing a Frame Relay WANLab 8-1: Implementing EIGRP Configuring GRE Tunnels Lab 7-3: Establishing a GRE TunnelLab 8-2: Troubleshooting EIGRP Troubleshooting EIGRP Lab 8-1: Implementing EIGRPLab 8-3: Implementing EIGRP for IPv6 Implementing EIGRP for IPv6 Lab 8-2: Troubleshooting EIGRPLab 9-1: Implementing OSPF Multiarea OSPF IPv4 Implementation Lab 8-3: Implementing EIGRP for IPv6Lab 9-2: Configuring Multiarea OSPF Troubleshooting Multiarea OSPF Lab 9-1: Implementing OSPFLab 9-3: Troubleshooting Multiarea OSPF Examining OSPFv3 Lab 9-2: Configuring Multiarea OSPFLab 9-4: Configuring OSPF for IPv6 Managing Cisco Devices Lab 9-3: Troubleshooting Multiarea OSPFLab 10-1: SNMP and Syslog Basic Licensing Lab 9-4: Configuring OSPF for IPv6Configuration Lab 1-2: Troubleshooting Switch Media Lab 10-1: SNMP and Syslog BasicLab 10-2: Analyzing NetFlow Data Issues ConfigurationLab 10-3: Managing Cisco Devices and Lab 2-1: Performing Initial Router Setup Lab 10-2: Analyzing NetFlow DataLicensing and Configuration Lab 10-3: Managing Cisco Devices and

Lab 2-2: Connecting to the Internet LicensingLab 3-1: Enhancing the Security of the

line Initial ConfigurationUnderstanding the Host-to-Host Lab 3-2: Device Hardening lineCommunications Model Lab 3-3: Filtering Traffic with ACLs Understanding the Host-to-HostIntroducing LANs Lab 4-1: Configure and Verify Basic IPv6 Communications ModelOperating Cisco IOS Software Lab 4-2: Configure and Verify Stateless Introducing LANsStarting a Switch Autoconfiguration Operating Cisco IOS SoftwareUnderstanding Ethernet and Switch Lab 4-3: Configure and Verify IPv6 Starting a SwitchOperation Routing Understanding Ethernet and SwitchTroubleshooting Common Switch Media Lab 5-1: Configuring Expanded Switched OperationIssues Networks Troubleshooting Common Switch MediaUnderstanding IP Addressing and Subnets Lab 5-2: Configuring DHCP Server IssuesUnderstanding the TCP/IP Transport Layer Lab 5-3: Troubleshooting VLANs and Understanding IP Addressing and SubnetsExploring the Functions of Routing Trunks Understanding the TCP/IP Transport LayerConfiguring a Cisco Router Lab 5-4: Optimizing STP Exploring the Functions of RoutingExploring the Packet Delivery Process Lab 5-5: Configuring EtherChannel Configuring a Cisco RouterEnabling Static Routing Lab 6-1: Troubleshooting IP Connectivity Exploring the Packet Delivery ProcessManaging Traffic Using ACLs Lab 7-1: Configuring and Troubleshooting Enabling Static RoutingEnabling Internet Connectivity a Serial Connection Managing Traffic Using ACLsImplementing Device Hardening Lab 7-2: Establishing a Frame Relay Enabling Internet ConnectivityImplementing Traffic Filtering with ACLs WAN Implementing Device HardeningUnderstanding IPv6 Lab 7-3: Establishing a GRE Tunnel Implementing Traffic Filtering with ACLs Configuring IPv6 Routing Lab 8-1: Implementing EIGRP Understanding IPv6Routing Between VLANs Lab 8-2: Troubleshooting EIGRP Configuring IPv6 RoutingUsing a Cisco Network Device as a DHCP Lab 8-3: Implementing EIGRP for IPv6 Routing Between VLANsServer Lab 9-1: Implementing OSPF Using a Cisco Network Device as a DHCPTroubleshooting VLAN Connectivity Lab 9-2: Configuring Multiarea OSPF ServerBuilding Redundant Switched Topologies Lab 9-3: Troubleshooting Multiarea OSPF Troubleshooting VLAN ConnectivityImproving Redundant Switched Topologies Lab 9-4: Configuring OSPF for IPv6 Building Redundant Switched Topologieswith EtherChannel Lab 10-1: SNMP and Syslog Basic Improving Redundant Switched TopologiesUnderstanding Layer 3 Redundancy Configuration with EtherChannelTroubleshooting IPv6 Network Connectivity Lab 10-2: Analyzing NetFlow Data Understanding Layer 3 RedundancyConfiguring Serial Encapsulation Lab 10-3: Managing Cisco Devices and Troubleshooting IPv6 Network ConnectivityEstablishing a WAN Connection Using Licensing Configuring Serial EncapsulationFrame Relay Establishing a WAN Connection UsingIntroducing VPN Solutions Frame RelayConfiguring GRE Tunnels line Introducing VPN SolutionsTroubleshooting EIGRP Understanding the Host-to-Host Configuring GRE Tunnels Implementing EIGRP for IPv6 Communications Model Troubleshooting EIGRPMultiarea OSPF IPv4 Implementation Introducing LANs Implementing EIGRP for IPv6 Troubleshooting Multiarea OSPF Operating Cisco IOS Software Multiarea OSPF IPv4 ImplementationExamining OSPFv3 Starting a Switch Troubleshooting Multiarea OSPFManaging Cisco Devices Understanding Ethernet and Switch Examining OSPFv3 Licensing Operation Managing Cisco DevicesLab 1-2: Troubleshooting Switch Media Troubleshooting Common Switch Media LicensingIssues Issues Lab 1-2: Troubleshooting Switch MediaLab 2-1: Performing Initial Router Setup and Understanding IP Addressing and IssuesConfiguration Subnets Lab 2-1: Performing Initial Router SetupLab 2-2: Connecting to the Internet Understanding the TCP/IP Transport and ConfigurationLab 3-1: Enhancing the Security of the Initial Layer Lab 2-2: Connecting to the InternetConfiguration Exploring the Functions of Routing Lab 3-1: Enhancing the Security of the


Lab 3-2: Device Hardening Configuring a Cisco Router Initial ConfigurationLab 3-3: Filtering Traffic with ACLs Exploring the Packet Delivery Process Lab 3-2: Device HardeningLab 4-1: Configure and Verify Basic IPv6 Enabling Static Routing Lab 3-3: Filtering Traffic with ACLsLab 4-2: Configure and Verify Stateless Managing Traffic Using ACLs Lab 4-1: Configure and Verify Basic IPv6Autoconfiguration Enabling Internet Connectivity Lab 4-2: Configure and Verify StatelessLab 4-3: Configure and Verify IPv6 Routing Implementing Device Hardening AutoconfigurationLab 5-1: Configuring Expanded Switched Implementing Traffic Filtering with ACLs Lab 4-3: Configure and Verify IPv6 RoutingNetworks Understanding IPv6 Lab 5-1: Configuring Expanded SwitchedLab 5-2: Configuring DHCP Server Configuring IPv6 Routing NetworksLab 5-3: Troubleshooting VLANs and Trunks Routing Between VLANs Lab 5-2: Configuring DHCP ServerLab 5-4: Optimizing STP Using a Cisco Network Device as a Lab 5-3: Troubleshooting VLANs andLab 5-5: Configuring EtherChannel DHCP Server TrunksLab 6-1: Troubleshooting IP Connectivity Troubleshooting VLAN Connectivity Lab 5-4: Optimizing STPLab 7-1: Configuring and Troubleshooting a Building Redundant Switched Topologies Lab 5-5: Configuring EtherChannelSerial Connection Improving Redundant Switched Lab 6-1: Troubleshooting IP ConnectivityLab 7-2: Establishing a Frame Relay WAN Topologies with EtherChannel Lab 7-1: Configuring and TroubleshootingLab 7-3: Establishing a GRE Tunnel Understanding Layer 3 Redundancy a Serial ConnectionLab 8-1: Implementing EIGRP Troubleshooting IPv6 Network Lab 7-2: Establishing a Frame Relay WANLab 8-2: Troubleshooting EIGRP Connectivity Lab 7-3: Establishing a GRE TunnelLab 8-3: Implementing EIGRP for IPv6 Configuring Serial Encapsulation Lab 8-1: Implementing EIGRPLab 9-1: Implementing OSPF Establishing a WAN Connection Using Lab 8-2: Troubleshooting EIGRPLab 9-2: Configuring Multiarea OSPF Frame Relay Lab 8-3: Implementing EIGRP for IPv6Lab 9-3: Troubleshooting Multiarea OSPF Introducing VPN Solutions Lab 9-1: Implementing OSPFLab 9-4: Configuring OSPF for IPv6 Configuring GRE Tunnels Lab 9-2: Configuring Multiarea OSPFLab 10-1: SNMP and Syslog Basic Troubleshooting EIGRP Lab 9-3: Troubleshooting Multiarea OSPFConfiguration Implementing EIGRP for IPv6 Lab 9-4: Configuring OSPF for IPv6Lab 10-2: Analyzing NetFlow Data Multiarea OSPF IPv4 Implementation Lab 10-1: SNMP and Syslog BasicLab 10-3: Managing Cisco Devices and Troubleshooting Multiarea OSPF ConfigurationLicensing Examining OSPFv3 Lab 10-2: Analyzing NetFlow Data

Managing Cisco Devices Lab 10-3: Managing Cisco Devices andEstablishing Internet Connectivity Licensing Licensingline Lab 1-2: Troubleshooting Switch Media

Understanding the TCP/IP Internet Layer IssuesLab 2-1: Performing Initial Router Setup lineand Configuration Understanding the Host-to-Host

line Lab 2-2: Connecting to the Internet Communications ModelUnderstanding the Host-to-Host Lab 3-1: Enhancing the Security of the Introducing LANsCommunications Model Initial Configuration Operating Cisco IOS SoftwareIntroducing LANs Lab 3-2: Device Hardening Starting a SwitchOperating Cisco IOS Software Lab 3-3: Filtering Traffic with ACLs Understanding Ethernet and SwitchStarting a Switch Lab 4-1: Configure and Verify Basic IPv6 OperationUnderstanding Ethernet and Switch Lab 4-2: Configure and Verify Stateless Troubleshooting Common Switch MediaOperation Autoconfiguration IssuesTroubleshooting Common Switch Media Lab 4-3: Configure and Verify IPv6 Understanding IP Addressing and SubnetsIssues Routing Understanding the TCP/IP Transport LayerUnderstanding IP Addressing and Subnets Lab 5-1: Configuring Expanded Switched Exploring the Functions of RoutingUnderstanding the TCP/IP Transport Layer Networks Configuring a Cisco RouterExploring the Functions of Routing Lab 5-2: Configuring DHCP Server Exploring the Packet Delivery ProcessConfiguring a Cisco Router Lab 5-3: Troubleshooting VLANs and Enabling Static RoutingExploring the Packet Delivery Process Trunks Managing Traffic Using ACLsEnabling Static Routing Lab 5-4: Optimizing STP Enabling Internet ConnectivityManaging Traffic Using ACLs Lab 5-5: Configuring EtherChannel Implementing Device HardeningEnabling Internet Connectivity Lab 6-1: Troubleshooting IP Connectivity Implementing Traffic Filtering with ACLs Implementing Device Hardening Lab 7-1: Configuring and Troubleshooting Understanding IPv6Implementing Traffic Filtering with ACLs a Serial Connection Configuring IPv6 RoutingUnderstanding IPv6 Lab 7-2: Establishing a Frame Relay Routing Between VLANsConfiguring IPv6 Routing WAN Using a Cisco Network Device as a DHCPRouting Between VLANs Lab 7-3: Establishing a GRE Tunnel ServerUsing a Cisco Network Device as a DHCP Lab 8-1: Implementing EIGRP Troubleshooting VLAN ConnectivityServer Lab 8-2: Troubleshooting EIGRP Building Redundant Switched TopologiesTroubleshooting VLAN Connectivity Lab 8-3: Implementing EIGRP for IPv6 Improving Redundant Switched TopologiesBuilding Redundant Switched Topologies Lab 9-1: Implementing OSPF with EtherChannelImproving Redundant Switched Topologies Lab 9-2: Configuring Multiarea OSPF Understanding Layer 3 Redundancywith EtherChannel Lab 9-3: Troubleshooting Multiarea OSPF Troubleshooting IPv6 Network ConnectivityUnderstanding Layer 3 Redundancy Lab 9-4: Configuring OSPF for IPv6 Configuring Serial EncapsulationTroubleshooting IPv6 Network Connectivity Lab 10-1: SNMP and Syslog Basic Establishing a WAN Connection Using


Configuring Serial Encapsulation Configuration Frame RelayEstablishing a WAN Connection Using Lab 10-2: Analyzing NetFlow Data Introducing VPN SolutionsFrame Relay Lab 10-3: Managing Cisco Devices and Configuring GRE Tunnels Introducing VPN Solutions Licensing Troubleshooting EIGRPConfiguring GRE Tunnels Implementing EIGRP for IPv6 Troubleshooting EIGRP Multiarea OSPF IPv4 ImplementationImplementing EIGRP for IPv6 line Troubleshooting Multiarea OSPFMultiarea OSPF IPv4 Implementation Understanding the Host-to-Host Examining OSPFv3 Troubleshooting Multiarea OSPF Communications Model Managing Cisco DevicesExamining OSPFv3 Introducing LANs LicensingManaging Cisco Devices Operating Cisco IOS Software Lab 1-2: Troubleshooting Switch MediaLicensing Starting a Switch IssuesLab 1-2: Troubleshooting Switch Media Understanding Ethernet and Switch Lab 2-1: Performing Initial Router SetupIssues Operation and ConfigurationLab 2-1: Performing Initial Router Setup and Troubleshooting Common Switch Media Lab 2-2: Connecting to the InternetConfiguration Issues Lab 3-1: Enhancing the Security of theLab 2-2: Connecting to the Internet Understanding IP Addressing and Initial ConfigurationLab 3-1: Enhancing the Security of the Initial Subnets Lab 3-2: Device HardeningConfiguration Understanding the TCP/IP Transport Lab 3-3: Filtering Traffic with ACLsLab 3-2: Device Hardening Layer Lab 4-1: Configure and Verify Basic IPv6Lab 3-3: Filtering Traffic with ACLs Exploring the Functions of Routing Lab 4-2: Configure and Verify StatelessLab 4-1: Configure and Verify Basic IPv6 Configuring a Cisco Router AutoconfigurationLab 4-2: Configure and Verify Stateless Exploring the Packet Delivery Process Lab 4-3: Configure and Verify IPv6 RoutingAutoconfiguration Enabling Static Routing Lab 5-1: Configuring Expanded SwitchedLab 4-3: Configure and Verify IPv6 Routing Managing Traffic Using ACLs NetworksLab 5-1: Configuring Expanded Switched Enabling Internet Connectivity Lab 5-2: Configuring DHCP ServerNetworks Implementing Device Hardening Lab 5-3: Troubleshooting VLANs andLab 5-2: Configuring DHCP Server Implementing Traffic Filtering with ACLs TrunksLab 5-3: Troubleshooting VLANs and Trunks Understanding IPv6 Lab 5-4: Optimizing STPLab 5-4: Optimizing STP Configuring IPv6 Routing Lab 5-5: Configuring EtherChannelLab 5-5: Configuring EtherChannel Routing Between VLANs Lab 6-1: Troubleshooting IP ConnectivityLab 6-1: Troubleshooting IP Connectivity Using a Cisco Network Device as a Lab 7-1: Configuring and TroubleshootingLab 7-1: Configuring and Troubleshooting a DHCP Server a Serial ConnectionSerial Connection Troubleshooting VLAN Connectivity Lab 7-2: Establishing a Frame Relay WANLab 7-2: Establishing a Frame Relay WAN Building Redundant Switched Topologies Lab 7-3: Establishing a GRE TunnelLab 7-3: Establishing a GRE Tunnel Improving Redundant Switched Lab 8-1: Implementing EIGRPLab 8-1: Implementing EIGRP Topologies with EtherChannel Lab 8-2: Troubleshooting EIGRPLab 8-2: Troubleshooting EIGRP Understanding Layer 3 Redundancy Lab 8-3: Implementing EIGRP for IPv6Lab 8-3: Implementing EIGRP for IPv6 Troubleshooting IPv6 Network Lab 9-1: Implementing OSPFLab 9-1: Implementing OSPF Connectivity Lab 9-2: Configuring Multiarea OSPFLab 9-2: Configuring Multiarea OSPF Configuring Serial Encapsulation Lab 9-3: Troubleshooting Multiarea OSPFLab 9-3: Troubleshooting Multiarea OSPF Establishing a WAN Connection Using Lab 9-4: Configuring OSPF for IPv6Lab 9-4: Configuring OSPF for IPv6 Frame Relay Lab 10-1: SNMP and Syslog BasicLab 10-1: SNMP and Syslog Basic Introducing VPN Solutions ConfigurationConfiguration Configuring GRE Tunnels Lab 10-2: Analyzing NetFlow DataLab 10-2: Analyzing NetFlow Data Troubleshooting EIGRP Lab 10-3: Managing Cisco Devices andLab 10-3: Managing Cisco Devices and Implementing EIGRP for IPv6 LicensingLicensing Multiarea OSPF IPv4 Implementation

Troubleshooting Multiarea OSPFExamining OSPFv3 line

line Managing Cisco Devices Understanding the Host-to-HostUnderstanding the Host-to-Host Licensing Communications ModelCommunications Model Lab 1-2: Troubleshooting Switch Media Introducing LANsIntroducing LANs Issues Operating Cisco IOS SoftwareOperating Cisco IOS Software Lab 2-1: Performing Initial Router Setup Starting a SwitchStarting a Switch and Configuration Understanding Ethernet and SwitchUnderstanding Ethernet and Switch Lab 2-2: Connecting to the Internet OperationOperation Lab 3-1: Enhancing the Security of the Troubleshooting Common Switch MediaTroubleshooting Common Switch Media Initial Configuration IssuesIssues Lab 3-2: Device Hardening Understanding IP Addressing and SubnetsUnderstanding IP Addressing and Subnets Lab 3-3: Filtering Traffic with ACLs Understanding the TCP/IP Transport LayerUnderstanding the TCP/IP Transport Layer Lab 4-1: Configure and Verify Basic IPv6 Exploring the Functions of RoutingExploring the Functions of Routing Lab 4-2: Configure and Verify Stateless Configuring a Cisco RouterConfiguring a Cisco Router Autoconfiguration Exploring the Packet Delivery ProcessExploring the Packet Delivery Process Lab 4-3: Configure and Verify IPv6 Enabling Static RoutingEnabling Static Routing Routing Managing Traffic Using ACLs


Managing Traffic Using ACLs Lab 5-1: Configuring Expanded Switched Enabling Internet ConnectivityEnabling Internet Connectivity Networks Implementing Device HardeningImplementing Device Hardening Lab 5-2: Configuring DHCP Server Implementing Traffic Filtering with ACLs Implementing Traffic Filtering with ACLs Lab 5-3: Troubleshooting VLANs and Understanding IPv6Understanding IPv6 Trunks Configuring IPv6 RoutingConfiguring IPv6 Routing Lab 5-4: Optimizing STP Routing Between VLANsRouting Between VLANs Lab 5-5: Configuring EtherChannel Using a Cisco Network Device as a DHCPUsing a Cisco Network Device as a DHCP Lab 6-1: Troubleshooting IP Connectivity ServerServer Lab 7-1: Configuring and Troubleshooting Troubleshooting VLAN ConnectivityTroubleshooting VLAN Connectivity a Serial Connection Building Redundant Switched TopologiesBuilding Redundant Switched Topologies Lab 7-2: Establishing a Frame Relay Improving Redundant Switched TopologiesImproving Redundant Switched Topologies WAN with EtherChannelwith EtherChannel Lab 7-3: Establishing a GRE Tunnel Understanding Layer 3 RedundancyUnderstanding Layer 3 Redundancy Lab 8-1: Implementing EIGRP Troubleshooting IPv6 Network ConnectivityTroubleshooting IPv6 Network Connectivity Lab 8-2: Troubleshooting EIGRP Configuring Serial EncapsulationConfiguring Serial Encapsulation Lab 8-3: Implementing EIGRP for IPv6 Establishing a WAN Connection UsingEstablishing a WAN Connection Using Lab 9-1: Implementing OSPF Frame RelayFrame Relay Lab 9-2: Configuring Multiarea OSPF Introducing VPN SolutionsIntroducing VPN Solutions Lab 9-3: Troubleshooting Multiarea OSPF Configuring GRE Tunnels Configuring GRE Tunnels Lab 9-4: Configuring OSPF for IPv6 Troubleshooting EIGRPTroubleshooting EIGRP Lab 10-1: SNMP and Syslog Basic Implementing EIGRP for IPv6 Implementing EIGRP for IPv6 Configuration Multiarea OSPF IPv4 ImplementationMultiarea OSPF IPv4 Implementation Lab 10-2: Analyzing NetFlow Data Troubleshooting Multiarea OSPFTroubleshooting Multiarea OSPF Lab 10-3: Managing Cisco Devices and Examining OSPFv3 Examining OSPFv3 Licensing Managing Cisco DevicesManaging Cisco Devices LicensingLicensing Lab 1-2: Troubleshooting Switch MediaLab 1-2: Troubleshooting Switch Media line IssuesIssues Understanding the Host-to-Host Lab 2-1: Performing Initial Router SetupLab 2-1: Performing Initial Router Setup and Communications Model and ConfigurationConfiguration Introducing LANs Lab 2-2: Connecting to the InternetLab 2-2: Connecting to the Internet Operating Cisco IOS Software Lab 3-1: Enhancing the Security of theLab 3-1: Enhancing the Security of the Initial Starting a Switch Initial ConfigurationConfiguration Understanding Ethernet and Switch Lab 3-2: Device HardeningLab 3-2: Device Hardening Operation Lab 3-3: Filtering Traffic with ACLsLab 3-3: Filtering Traffic with ACLs Troubleshooting Common Switch Media Lab 4-1: Configure and Verify Basic IPv6Lab 4-1: Configure and Verify Basic IPv6 Issues Lab 4-2: Configure and Verify StatelessLab 4-2: Configure and Verify Stateless Understanding IP Addressing and AutoconfigurationAutoconfiguration Subnets Lab 4-3: Configure and Verify IPv6 RoutingLab 4-3: Configure and Verify IPv6 Routing Understanding the TCP/IP Transport Lab 5-1: Configuring Expanded SwitchedLab 5-1: Configuring Expanded Switched Layer NetworksNetworks Exploring the Functions of Routing Lab 5-2: Configuring DHCP ServerLab 5-2: Configuring DHCP Server Configuring a Cisco Router Lab 5-3: Troubleshooting VLANs andLab 5-3: Troubleshooting VLANs and Trunks Exploring the Packet Delivery Process TrunksLab 5-4: Optimizing STP Enabling Static Routing Lab 5-4: Optimizing STPLab 5-5: Configuring EtherChannel Managing Traffic Using ACLs Lab 5-5: Configuring EtherChannelLab 6-1: Troubleshooting IP Connectivity Enabling Internet Connectivity Lab 6-1: Troubleshooting IP ConnectivityLab 7-1: Configuring and Troubleshooting a Implementing Device Hardening Lab 7-1: Configuring and TroubleshootingSerial Connection Implementing Traffic Filtering with ACLs a Serial ConnectionLab 7-2: Establishing a Frame Relay WAN Understanding IPv6 Lab 7-2: Establishing a Frame Relay WANLab 7-3: Establishing a GRE Tunnel Configuring IPv6 Routing Lab 7-3: Establishing a GRE TunnelLab 8-1: Implementing EIGRP Routing Between VLANs Lab 8-1: Implementing EIGRPLab 8-2: Troubleshooting EIGRP Using a Cisco Network Device as a Lab 8-2: Troubleshooting EIGRPLab 8-3: Implementing EIGRP for IPv6 DHCP Server Lab 8-3: Implementing EIGRP for IPv6Lab 9-1: Implementing OSPF Troubleshooting VLAN Connectivity Lab 9-1: Implementing OSPFLab 9-2: Configuring Multiarea OSPF Building Redundant Switched Topologies Lab 9-2: Configuring Multiarea OSPFLab 9-3: Troubleshooting Multiarea OSPF Improving Redundant Switched Lab 9-3: Troubleshooting Multiarea OSPFLab 9-4: Configuring OSPF for IPv6 Topologies with EtherChannel Lab 9-4: Configuring OSPF for IPv6Lab 10-1: SNMP and Syslog Basic Understanding Layer 3 Redundancy Lab 10-1: SNMP and Syslog BasicConfiguration Troubleshooting IPv6 Network ConfigurationLab 10-2: Analyzing NetFlow Data Connectivity Lab 10-2: Analyzing NetFlow DataLab 10-3: Managing Cisco Devices and Configuring Serial Encapsulation Lab 10-3: Managing Cisco Devices andLicensing Establishing a WAN Connection Using Licensing

Frame RelayIntroducing VPN Solutions

line Configuring GRE Tunnels line


Understanding the Host-to-Host Troubleshooting EIGRP Understanding the Host-to-HostCommunications Model Implementing EIGRP for IPv6 Communications ModelIntroducing LANs Multiarea OSPF IPv4 Implementation Introducing LANsOperating Cisco IOS Software Troubleshooting Multiarea OSPF Operating Cisco IOS SoftwareStarting a Switch Examining OSPFv3 Starting a SwitchUnderstanding Ethernet and Switch Managing Cisco Devices Understanding Ethernet and SwitchOperation Licensing OperationTroubleshooting Common Switch Media Lab 1-2: Troubleshooting Switch Media Troubleshooting Common Switch MediaIssues Issues IssuesUnderstanding IP Addressing and Subnets Lab 2-1: Performing Initial Router Setup Understanding IP Addressing and SubnetsUnderstanding the TCP/IP Transport Layer and Configuration Understanding the TCP/IP Transport LayerExploring the Functions of Routing Lab 2-2: Connecting to the Internet Exploring the Functions of RoutingConfiguring a Cisco Router Lab 3-1: Enhancing the Security of the Configuring a Cisco RouterExploring the Packet Delivery Process Initial Configuration Exploring the Packet Delivery ProcessEnabling Static Routing Lab 3-2: Device Hardening Enabling Static RoutingManaging Traffic Using ACLs Lab 3-3: Filtering Traffic with ACLs Managing Traffic Using ACLsEnabling Internet Connectivity Lab 4-1: Configure and Verify Basic IPv6 Enabling Internet ConnectivityImplementing Device Hardening Lab 4-2: Configure and Verify Stateless Implementing Device HardeningImplementing Traffic Filtering with ACLs Autoconfiguration Implementing Traffic Filtering with ACLs Understanding IPv6 Lab 4-3: Configure and Verify IPv6 Understanding IPv6Configuring IPv6 Routing Routing Configuring IPv6 RoutingRouting Between VLANs Lab 5-1: Configuring Expanded Switched Routing Between VLANsUsing a Cisco Network Device as a DHCP Networks Using a Cisco Network Device as a DHCPServer Lab 5-2: Configuring DHCP Server ServerTroubleshooting VLAN Connectivity Lab 5-3: Troubleshooting VLANs and Troubleshooting VLAN ConnectivityBuilding Redundant Switched Topologies Trunks Building Redundant Switched TopologiesImproving Redundant Switched Topologies Lab 5-4: Optimizing STP Improving Redundant Switched Topologieswith EtherChannel Lab 5-5: Configuring EtherChannel with EtherChannelUnderstanding Layer 3 Redundancy Lab 6-1: Troubleshooting IP Connectivity Understanding Layer 3 RedundancyTroubleshooting IPv6 Network Connectivity Lab 7-1: Configuring and Troubleshooting Troubleshooting IPv6 Network ConnectivityConfiguring Serial Encapsulation a Serial Connection Configuring Serial EncapsulationEstablishing a WAN Connection Using Lab 7-2: Establishing a Frame Relay Establishing a WAN Connection UsingFrame Relay WAN Frame RelayIntroducing VPN Solutions Lab 7-3: Establishing a GRE Tunnel Introducing VPN SolutionsConfiguring GRE Tunnels Lab 8-1: Implementing EIGRP Configuring GRE Tunnels Troubleshooting EIGRP Lab 8-2: Troubleshooting EIGRP Troubleshooting EIGRPImplementing EIGRP for IPv6 Lab 8-3: Implementing EIGRP for IPv6 Implementing EIGRP for IPv6 Multiarea OSPF IPv4 Implementation Lab 9-1: Implementing OSPF Multiarea OSPF IPv4 ImplementationTroubleshooting Multiarea OSPF Lab 9-2: Configuring Multiarea OSPF Troubleshooting Multiarea OSPFExamining OSPFv3 Lab 9-3: Troubleshooting Multiarea OSPF Examining OSPFv3 Managing Cisco Devices Lab 9-4: Configuring OSPF for IPv6 Managing Cisco DevicesLicensing Lab 10-1: SNMP and Syslog Basic LicensingLab 1-2: Troubleshooting Switch Media Configuration Lab 1-2: Troubleshooting Switch MediaIssues Lab 10-2: Analyzing NetFlow Data IssuesLab 2-1: Performing Initial Router Setup and Lab 10-3: Managing Cisco Devices and Lab 2-1: Performing Initial Router SetupConfiguration Licensing and ConfigurationLab 2-2: Connecting to the Internet Lab 2-2: Connecting to the InternetLab 3-1: Enhancing the Security of the Initial Implementing an EIGRP-Based Solution Lab 3-1: Enhancing the Security of theConfiguration line Initial ConfigurationLab 3-2: Device Hardening Implementing EIGRP Lab 3-2: Device HardeningLab 3-3: Filtering Traffic with ACLs Lab 3-3: Filtering Traffic with ACLsLab 4-1: Configure and Verify Basic IPv6 Lab 4-1: Configure and Verify Basic IPv6Lab 4-2: Configure and Verify Stateless line Lab 4-2: Configure and Verify StatelessAutoconfiguration Understanding the Host-to-Host AutoconfigurationLab 4-3: Configure and Verify IPv6 Routing Communications Model Lab 4-3: Configure and Verify IPv6 RoutingLab 5-1: Configuring Expanded Switched Introducing LANs Lab 5-1: Configuring Expanded SwitchedNetworks Operating Cisco IOS Software NetworksLab 5-2: Configuring DHCP Server Starting a Switch Lab 5-2: Configuring DHCP ServerLab 5-3: Troubleshooting VLANs and Trunks Understanding Ethernet and Switch Lab 5-3: Troubleshooting VLANs andLab 5-4: Optimizing STP Operation TrunksLab 5-5: Configuring EtherChannel Troubleshooting Common Switch Media Lab 5-4: Optimizing STPLab 6-1: Troubleshooting IP Connectivity Issues Lab 5-5: Configuring EtherChannelLab 7-1: Configuring and Troubleshooting a Understanding IP Addressing and Lab 6-1: Troubleshooting IP ConnectivitySerial Connection Subnets Lab 7-1: Configuring and TroubleshootingLab 7-2: Establishing a Frame Relay WAN Understanding the TCP/IP Transport a Serial ConnectionLab 7-3: Establishing a GRE Tunnel Layer Lab 7-2: Establishing a Frame Relay WAN


Lab 8-1: Implementing EIGRP Exploring the Functions of Routing Lab 7-3: Establishing a GRE TunnelLab 8-2: Troubleshooting EIGRP Configuring a Cisco Router Lab 8-1: Implementing EIGRPLab 8-3: Implementing EIGRP for IPv6 Exploring the Packet Delivery Process Lab 8-2: Troubleshooting EIGRPLab 9-1: Implementing OSPF Enabling Static Routing Lab 8-3: Implementing EIGRP for IPv6Lab 9-2: Configuring Multiarea OSPF Managing Traffic Using ACLs Lab 9-1: Implementing OSPFLab 9-3: Troubleshooting Multiarea OSPF Enabling Internet Connectivity Lab 9-2: Configuring Multiarea OSPFLab 9-4: Configuring OSPF for IPv6 Implementing Device Hardening Lab 9-3: Troubleshooting Multiarea OSPFLab 10-1: SNMP and Syslog Basic Implementing Traffic Filtering with ACLs Lab 9-4: Configuring OSPF for IPv6Configuration Understanding IPv6 Lab 10-1: SNMP and Syslog BasicLab 10-2: Analyzing NetFlow Data Configuring IPv6 Routing ConfigurationLab 10-3: Managing Cisco Devices and Routing Between VLANs Lab 10-2: Analyzing NetFlow DataLicensing Using a Cisco Network Device as a Lab 10-3: Managing Cisco Devices and

DHCP Server LicensingTroubleshooting VLAN Connectivity

line Building Redundant Switched TopologiesUnderstanding the Host-to-Host Improving Redundant Switched lineCommunications Model Topologies with EtherChannel Understanding the Host-to-HostIntroducing LANs Understanding Layer 3 Redundancy Communications ModelOperating Cisco IOS Software Troubleshooting IPv6 Network Introducing LANsStarting a Switch Connectivity Operating Cisco IOS SoftwareUnderstanding Ethernet and Switch Configuring Serial Encapsulation Starting a SwitchOperation Establishing a WAN Connection Using Understanding Ethernet and SwitchTroubleshooting Common Switch Media Frame Relay OperationIssues Introducing VPN Solutions Troubleshooting Common Switch MediaUnderstanding IP Addressing and Subnets Configuring GRE Tunnels IssuesUnderstanding the TCP/IP Transport Layer Troubleshooting EIGRP Understanding IP Addressing and SubnetsExploring the Functions of Routing Implementing EIGRP for IPv6 Understanding the TCP/IP Transport LayerConfiguring a Cisco Router Multiarea OSPF IPv4 Implementation Exploring the Functions of RoutingExploring the Packet Delivery Process Troubleshooting Multiarea OSPF Configuring a Cisco RouterEnabling Static Routing Examining OSPFv3 Exploring the Packet Delivery ProcessManaging Traffic Using ACLs Managing Cisco Devices Enabling Static RoutingEnabling Internet Connectivity Licensing Managing Traffic Using ACLsImplementing Device Hardening Lab 1-2: Troubleshooting Switch Media Enabling Internet ConnectivityImplementing Traffic Filtering with ACLs Issues Implementing Device HardeningUnderstanding IPv6 Lab 2-1: Performing Initial Router Setup Implementing Traffic Filtering with ACLs Configuring IPv6 Routing and Configuration Understanding IPv6Routing Between VLANs Lab 2-2: Connecting to the Internet Configuring IPv6 RoutingUsing a Cisco Network Device as a DHCP Lab 3-1: Enhancing the Security of the Routing Between VLANsServer Initial Configuration Using a Cisco Network Device as a DHCPTroubleshooting VLAN Connectivity Lab 3-2: Device Hardening ServerBuilding Redundant Switched Topologies Lab 3-3: Filtering Traffic with ACLs Troubleshooting VLAN ConnectivityImproving Redundant Switched Topologies Lab 4-1: Configure and Verify Basic IPv6 Building Redundant Switched Topologieswith EtherChannel Lab 4-2: Configure and Verify Stateless Improving Redundant Switched TopologiesUnderstanding Layer 3 Redundancy Autoconfiguration with EtherChannelTroubleshooting IPv6 Network Connectivity Lab 4-3: Configure and Verify IPv6 Understanding Layer 3 RedundancyConfiguring Serial Encapsulation Routing Troubleshooting IPv6 Network ConnectivityEstablishing a WAN Connection Using Lab 5-1: Configuring Expanded Switched Configuring Serial EncapsulationFrame Relay Networks Establishing a WAN Connection UsingIntroducing VPN Solutions Lab 5-2: Configuring DHCP Server Frame RelayConfiguring GRE Tunnels Lab 5-3: Troubleshooting VLANs and Introducing VPN SolutionsTroubleshooting EIGRP Trunks Configuring GRE Tunnels Implementing EIGRP for IPv6 Lab 5-4: Optimizing STP Troubleshooting EIGRPMultiarea OSPF IPv4 Implementation Lab 5-5: Configuring EtherChannel Implementing EIGRP for IPv6 Troubleshooting Multiarea OSPF Lab 6-1: Troubleshooting IP Connectivity Multiarea OSPF IPv4 ImplementationExamining OSPFv3 Lab 7-1: Configuring and Troubleshooting Troubleshooting Multiarea OSPFManaging Cisco Devices a Serial Connection Examining OSPFv3 Licensing Lab 7-2: Establishing a Frame Relay Managing Cisco DevicesLab 1-2: Troubleshooting Switch Media WAN LicensingIssues Lab 7-3: Establishing a GRE Tunnel Lab 1-2: Troubleshooting Switch MediaLab 2-1: Performing Initial Router Setup and Lab 8-1: Implementing EIGRP IssuesConfiguration Lab 8-2: Troubleshooting EIGRP Lab 2-1: Performing Initial Router SetupLab 2-2: Connecting to the Internet Lab 8-3: Implementing EIGRP for IPv6 and ConfigurationLab 3-1: Enhancing the Security of the Initial Lab 9-1: Implementing OSPF Lab 2-2: Connecting to the InternetConfiguration Lab 9-2: Configuring Multiarea OSPF Lab 3-1: Enhancing the Security of theLab 3-2: Device Hardening Lab 9-3: Troubleshooting Multiarea OSPF Initial ConfigurationLab 3-3: Filtering Traffic with ACLs Lab 9-4: Configuring OSPF for IPv6 Lab 3-2: Device Hardening


Lab 4-1: Configure and Verify Basic IPv6 Lab 10-1: SNMP and Syslog Basic Lab 3-3: Filtering Traffic with ACLsLab 4-2: Configure and Verify Stateless Configuration Lab 4-1: Configure and Verify Basic IPv6Autoconfiguration Lab 10-2: Analyzing NetFlow Data Lab 4-2: Configure and Verify StatelessLab 4-3: Configure and Verify IPv6 Routing Lab 10-3: Managing Cisco Devices and AutoconfigurationLab 5-1: Configuring Expanded Switched Licensing Lab 4-3: Configure and Verify IPv6 RoutingNetworks Lab 5-1: Configuring Expanded SwitchedLab 5-2: Configuring DHCP Server NetworksLab 5-3: Troubleshooting VLANs and Trunks line Lab 5-2: Configuring DHCP ServerLab 5-4: Optimizing STP Understanding the Host-to-Host Lab 5-3: Troubleshooting VLANs andLab 5-5: Configuring EtherChannel Communications Model TrunksLab 6-1: Troubleshooting IP Connectivity Introducing LANs Lab 5-4: Optimizing STPLab 7-1: Configuring and Troubleshooting a Operating Cisco IOS Software Lab 5-5: Configuring EtherChannelSerial Connection Starting a Switch Lab 6-1: Troubleshooting IP ConnectivityLab 7-2: Establishing a Frame Relay WAN Understanding Ethernet and Switch Lab 7-1: Configuring and TroubleshootingLab 7-3: Establishing a GRE Tunnel Operation a Serial ConnectionLab 8-1: Implementing EIGRP Troubleshooting Common Switch Media Lab 7-2: Establishing a Frame Relay WANLab 8-2: Troubleshooting EIGRP Issues Lab 7-3: Establishing a GRE TunnelLab 8-3: Implementing EIGRP for IPv6 Understanding IP Addressing and Lab 8-1: Implementing EIGRPLab 9-1: Implementing OSPF Subnets Lab 8-2: Troubleshooting EIGRPLab 9-2: Configuring Multiarea OSPF Understanding the TCP/IP Transport Lab 8-3: Implementing EIGRP for IPv6Lab 9-3: Troubleshooting Multiarea OSPF Layer Lab 9-1: Implementing OSPFLab 9-4: Configuring OSPF for IPv6 Exploring the Functions of Routing Lab 9-2: Configuring Multiarea OSPFLab 10-1: SNMP and Syslog Basic Configuring a Cisco Router Lab 9-3: Troubleshooting Multiarea OSPFConfiguration Exploring the Packet Delivery Process Lab 9-4: Configuring OSPF for IPv6Lab 10-2: Analyzing NetFlow Data Enabling Static Routing Lab 10-1: SNMP and Syslog BasicLab 10-3: Managing Cisco Devices and Managing Traffic Using ACLs ConfigurationLicensing Enabling Internet Connectivity Lab 10-2: Analyzing NetFlow Data

Implementing Device Hardening Lab 10-3: Managing Cisco Devices andImplementing Traffic Filtering with ACLs Licensing

line Understanding IPv6Understanding the Host-to-Host Configuring IPv6 RoutingCommunications Model Routing Between VLANs lineIntroducing LANs Using a Cisco Network Device as a Understanding the Host-to-HostOperating Cisco IOS Software DHCP Server Communications ModelStarting a Switch Troubleshooting VLAN Connectivity Introducing LANsUnderstanding Ethernet and Switch Building Redundant Switched Topologies Operating Cisco IOS SoftwareOperation Improving Redundant Switched Starting a SwitchTroubleshooting Common Switch Media Topologies with EtherChannel Understanding Ethernet and SwitchIssues Understanding Layer 3 Redundancy OperationUnderstanding IP Addressing and Subnets Troubleshooting IPv6 Network Troubleshooting Common Switch MediaUnderstanding the TCP/IP Transport Layer Connectivity IssuesExploring the Functions of Routing Configuring Serial Encapsulation Understanding IP Addressing and SubnetsConfiguring a Cisco Router Establishing a WAN Connection Using Understanding the TCP/IP Transport LayerExploring the Packet Delivery Process Frame Relay Exploring the Functions of RoutingEnabling Static Routing Introducing VPN Solutions Configuring a Cisco RouterManaging Traffic Using ACLs Configuring GRE Tunnels Exploring the Packet Delivery ProcessEnabling Internet Connectivity Troubleshooting EIGRP Enabling Static RoutingImplementing Device Hardening Implementing EIGRP for IPv6 Managing Traffic Using ACLsImplementing Traffic Filtering with ACLs Multiarea OSPF IPv4 Implementation Enabling Internet ConnectivityUnderstanding IPv6 Troubleshooting Multiarea OSPF Implementing Device HardeningConfiguring IPv6 Routing Examining OSPFv3 Implementing Traffic Filtering with ACLs Routing Between VLANs Managing Cisco Devices Understanding IPv6Using a Cisco Network Device as a DHCP Licensing Configuring IPv6 RoutingServer Lab 1-2: Troubleshooting Switch Media Routing Between VLANsTroubleshooting VLAN Connectivity Issues Using a Cisco Network Device as a DHCPBuilding Redundant Switched Topologies Lab 2-1: Performing Initial Router Setup ServerImproving Redundant Switched Topologies and Configuration Troubleshooting VLAN Connectivitywith EtherChannel Lab 2-2: Connecting to the Internet Building Redundant Switched TopologiesUnderstanding Layer 3 Redundancy Lab 3-1: Enhancing the Security of the Improving Redundant Switched TopologiesTroubleshooting IPv6 Network Connectivity Initial Configuration with EtherChannelConfiguring Serial Encapsulation Lab 3-2: Device Hardening Understanding Layer 3 RedundancyEstablishing a WAN Connection Using Lab 3-3: Filtering Traffic with ACLs Troubleshooting IPv6 Network ConnectivityFrame Relay Lab 4-1: Configure and Verify Basic IPv6 Configuring Serial EncapsulationIntroducing VPN Solutions Lab 4-2: Configure and Verify Stateless Establishing a WAN Connection UsingConfiguring GRE Tunnels Autoconfiguration Frame RelayTroubleshooting EIGRP Lab 4-3: Configure and Verify IPv6 Introducing VPN Solutions


Implementing EIGRP for IPv6 Routing Configuring GRE Tunnels Multiarea OSPF IPv4 Implementation Lab 5-1: Configuring Expanded Switched Troubleshooting EIGRPTroubleshooting Multiarea OSPF Networks Implementing EIGRP for IPv6 Examining OSPFv3 Lab 5-2: Configuring DHCP Server Multiarea OSPF IPv4 ImplementationManaging Cisco Devices Lab 5-3: Troubleshooting VLANs and Troubleshooting Multiarea OSPFLicensing Trunks Examining OSPFv3 Lab 1-2: Troubleshooting Switch Media Lab 5-4: Optimizing STP Managing Cisco DevicesIssues Lab 5-5: Configuring EtherChannel LicensingLab 2-1: Performing Initial Router Setup and Lab 6-1: Troubleshooting IP Connectivity Lab 1-2: Troubleshooting Switch MediaConfiguration Lab 7-1: Configuring and Troubleshooting IssuesLab 2-2: Connecting to the Internet a Serial Connection Lab 2-1: Performing Initial Router SetupLab 3-1: Enhancing the Security of the Initial Lab 7-2: Establishing a Frame Relay and ConfigurationConfiguration WAN Lab 2-2: Connecting to the InternetLab 3-2: Device Hardening Lab 7-3: Establishing a GRE Tunnel Lab 3-1: Enhancing the Security of theLab 3-3: Filtering Traffic with ACLs Lab 8-1: Implementing EIGRP Initial ConfigurationLab 4-1: Configure and Verify Basic IPv6 Lab 8-2: Troubleshooting EIGRP Lab 3-2: Device HardeningLab 4-2: Configure and Verify Stateless Lab 8-3: Implementing EIGRP for IPv6 Lab 3-3: Filtering Traffic with ACLsAutoconfiguration Lab 9-1: Implementing OSPF Lab 4-1: Configure and Verify Basic IPv6Lab 4-3: Configure and Verify IPv6 Routing Lab 9-2: Configuring Multiarea OSPF Lab 4-2: Configure and Verify StatelessLab 5-1: Configuring Expanded Switched Lab 9-3: Troubleshooting Multiarea OSPF AutoconfigurationNetworks Lab 9-4: Configuring OSPF for IPv6 Lab 4-3: Configure and Verify IPv6 RoutingLab 5-2: Configuring DHCP Server Lab 10-1: SNMP and Syslog Basic Lab 5-1: Configuring Expanded SwitchedLab 5-3: Troubleshooting VLANs and Trunks Configuration NetworksLab 5-4: Optimizing STP Lab 10-2: Analyzing NetFlow Data Lab 5-2: Configuring DHCP ServerLab 5-5: Configuring EtherChannel Lab 10-3: Managing Cisco Devices and Lab 5-3: Troubleshooting VLANs andLab 6-1: Troubleshooting IP Connectivity Licensing TrunksLab 7-1: Configuring and Troubleshooting a Lab 5-4: Optimizing STPSerial Connection Implementing a Scalable OSPF-Based Lab 5-5: Configuring EtherChannelLab 7-2: Establishing a Frame Relay WAN Solution Lab 6-1: Troubleshooting IP ConnectivityLab 7-3: Establishing a GRE Tunnel line Lab 7-1: Configuring and TroubleshootingLab 8-1: Implementing EIGRP Implementing OSPF a Serial ConnectionLab 8-2: Troubleshooting EIGRP Lab 7-2: Establishing a Frame Relay WANLab 8-3: Implementing EIGRP for IPv6 Lab 7-3: Establishing a GRE TunnelLab 9-1: Implementing OSPF line Lab 8-1: Implementing EIGRPLab 9-2: Configuring Multiarea OSPF Understanding the Host-to-Host Lab 8-2: Troubleshooting EIGRPLab 9-3: Troubleshooting Multiarea OSPF Communications Model Lab 8-3: Implementing EIGRP for IPv6Lab 9-4: Configuring OSPF for IPv6 Introducing LANs Lab 9-1: Implementing OSPFLab 10-1: SNMP and Syslog Basic Operating Cisco IOS Software Lab 9-2: Configuring Multiarea OSPFConfiguration Starting a Switch Lab 9-3: Troubleshooting Multiarea OSPFLab 10-2: Analyzing NetFlow Data Understanding Ethernet and Switch Lab 9-4: Configuring OSPF for IPv6Lab 10-3: Managing Cisco Devices and Operation Lab 10-1: SNMP and Syslog BasicLicensing Troubleshooting Common Switch Media Configuration

Issues Lab 10-2: Analyzing NetFlow DataUnderstanding IP Addressing and Lab 10-3: Managing Cisco Devices and

line Subnets LicensingUnderstanding the Host-to-Host Understanding the TCP/IP TransportCommunications Model LayerIntroducing LANs Exploring the Functions of Routing lineOperating Cisco IOS Software Configuring a Cisco Router Understanding the Host-to-HostStarting a Switch Exploring the Packet Delivery Process Communications ModelUnderstanding Ethernet and Switch Enabling Static Routing Introducing LANsOperation Managing Traffic Using ACLs Operating Cisco IOS SoftwareTroubleshooting Common Switch Media Enabling Internet Connectivity Starting a SwitchIssues Implementing Device Hardening Understanding Ethernet and SwitchUnderstanding IP Addressing and Subnets Implementing Traffic Filtering with ACLs OperationUnderstanding the TCP/IP Transport Layer Understanding IPv6 Troubleshooting Common Switch MediaExploring the Functions of Routing Configuring IPv6 Routing IssuesConfiguring a Cisco Router Routing Between VLANs Understanding IP Addressing and SubnetsExploring the Packet Delivery Process Using a Cisco Network Device as a Understanding the TCP/IP Transport LayerEnabling Static Routing DHCP Server Exploring the Functions of RoutingManaging Traffic Using ACLs Troubleshooting VLAN Connectivity Configuring a Cisco RouterEnabling Internet Connectivity Building Redundant Switched Topologies Exploring the Packet Delivery ProcessImplementing Device Hardening Improving Redundant Switched Enabling Static RoutingImplementing Traffic Filtering with ACLs Topologies with EtherChannel Managing Traffic Using ACLsUnderstanding IPv6 Understanding Layer 3 Redundancy Enabling Internet ConnectivityConfiguring IPv6 Routing Troubleshooting IPv6 Network Implementing Device Hardening


Routing Between VLANs Connectivity Implementing Traffic Filtering with ACLs Using a Cisco Network Device as a DHCP Configuring Serial Encapsulation Understanding IPv6Server Establishing a WAN Connection Using Configuring IPv6 RoutingTroubleshooting VLAN Connectivity Frame Relay Routing Between VLANsBuilding Redundant Switched Topologies Introducing VPN Solutions Using a Cisco Network Device as a DHCPImproving Redundant Switched Topologies Configuring GRE Tunnels Serverwith EtherChannel Troubleshooting EIGRP Troubleshooting VLAN ConnectivityUnderstanding Layer 3 Redundancy Implementing EIGRP for IPv6 Building Redundant Switched TopologiesTroubleshooting IPv6 Network Connectivity Multiarea OSPF IPv4 Implementation Improving Redundant Switched TopologiesConfiguring Serial Encapsulation Troubleshooting Multiarea OSPF with EtherChannelEstablishing a WAN Connection Using Examining OSPFv3 Understanding Layer 3 RedundancyFrame Relay Managing Cisco Devices Troubleshooting IPv6 Network ConnectivityIntroducing VPN Solutions Licensing Configuring Serial EncapsulationConfiguring GRE Tunnels Lab 1-2: Troubleshooting Switch Media Establishing a WAN Connection UsingTroubleshooting EIGRP Issues Frame RelayImplementing EIGRP for IPv6 Lab 2-1: Performing Initial Router Setup Introducing VPN SolutionsMultiarea OSPF IPv4 Implementation and Configuration Configuring GRE Tunnels Troubleshooting Multiarea OSPF Lab 2-2: Connecting to the Internet Troubleshooting EIGRPExamining OSPFv3 Lab 3-1: Enhancing the Security of the Implementing EIGRP for IPv6 Managing Cisco Devices Initial Configuration Multiarea OSPF IPv4 ImplementationLicensing Lab 3-2: Device Hardening Troubleshooting Multiarea OSPFLab 1-2: Troubleshooting Switch Media Lab 3-3: Filtering Traffic with ACLs Examining OSPFv3 Issues Lab 4-1: Configure and Verify Basic IPv6 Managing Cisco DevicesLab 2-1: Performing Initial Router Setup and Lab 4-2: Configure and Verify Stateless LicensingConfiguration Autoconfiguration Lab 1-2: Troubleshooting Switch MediaLab 2-2: Connecting to the Internet Lab 4-3: Configure and Verify IPv6 IssuesLab 3-1: Enhancing the Security of the Initial Routing Lab 2-1: Performing Initial Router SetupConfiguration Lab 5-1: Configuring Expanded Switched and ConfigurationLab 3-2: Device Hardening Networks Lab 2-2: Connecting to the InternetLab 3-3: Filtering Traffic with ACLs Lab 5-2: Configuring DHCP Server Lab 3-1: Enhancing the Security of theLab 4-1: Configure and Verify Basic IPv6 Lab 5-3: Troubleshooting VLANs and Initial ConfigurationLab 4-2: Configure and Verify Stateless Trunks Lab 3-2: Device HardeningAutoconfiguration Lab 5-4: Optimizing STP Lab 3-3: Filtering Traffic with ACLsLab 4-3: Configure and Verify IPv6 Routing Lab 5-5: Configuring EtherChannel Lab 4-1: Configure and Verify Basic IPv6Lab 5-1: Configuring Expanded Switched Lab 6-1: Troubleshooting IP Connectivity Lab 4-2: Configure and Verify StatelessNetworks Lab 7-1: Configuring and Troubleshooting AutoconfigurationLab 5-2: Configuring DHCP Server a Serial Connection Lab 4-3: Configure and Verify IPv6 RoutingLab 5-3: Troubleshooting VLANs and Trunks Lab 7-2: Establishing a Frame Relay Lab 5-1: Configuring Expanded SwitchedLab 5-4: Optimizing STP WAN NetworksLab 5-5: Configuring EtherChannel Lab 7-3: Establishing a GRE Tunnel Lab 5-2: Configuring DHCP ServerLab 6-1: Troubleshooting IP Connectivity Lab 8-1: Implementing EIGRP Lab 5-3: Troubleshooting VLANs andLab 7-1: Configuring and Troubleshooting a Lab 8-2: Troubleshooting EIGRP TrunksSerial Connection Lab 8-3: Implementing EIGRP for IPv6 Lab 5-4: Optimizing STPLab 7-2: Establishing a Frame Relay WAN Lab 9-1: Implementing OSPF Lab 5-5: Configuring EtherChannelLab 7-3: Establishing a GRE Tunnel Lab 9-2: Configuring Multiarea OSPF Lab 6-1: Troubleshooting IP ConnectivityLab 8-1: Implementing EIGRP Lab 9-3: Troubleshooting Multiarea OSPF Lab 7-1: Configuring and TroubleshootingLab 8-2: Troubleshooting EIGRP Lab 9-4: Configuring OSPF for IPv6 a Serial ConnectionLab 8-3: Implementing EIGRP for IPv6 Lab 10-1: SNMP and Syslog Basic Lab 7-2: Establishing a Frame Relay WANLab 9-1: Implementing OSPF Configuration Lab 7-3: Establishing a GRE TunnelLab 9-2: Configuring Multiarea OSPF Lab 10-2: Analyzing NetFlow Data Lab 8-1: Implementing EIGRPLab 9-3: Troubleshooting Multiarea OSPF Lab 10-3: Managing Cisco Devices and Lab 8-2: Troubleshooting EIGRPLab 9-4: Configuring OSPF for IPv6 Licensing Lab 8-3: Implementing EIGRP for IPv6Lab 10-1: SNMP and Syslog Basic Lab 9-1: Implementing OSPFConfiguration Lab 9-2: Configuring Multiarea OSPFLab 10-2: Analyzing NetFlow Data line Lab 9-3: Troubleshooting Multiarea OSPFLab 10-3: Managing Cisco Devices and Understanding the Host-to-Host Lab 9-4: Configuring OSPF for IPv6Licensing Communications Model Lab 10-1: SNMP and Syslog Basic

Introducing LANs ConfigurationOperating Cisco IOS Software Lab 10-2: Analyzing NetFlow Data

line Starting a Switch Lab 10-3: Managing Cisco Devices andUnderstanding the Host-to-Host Understanding Ethernet and Switch LicensingCommunications Model OperationIntroducing LANs Troubleshooting Common Switch MediaOperating Cisco IOS Software Issues lineStarting a Switch Understanding IP Addressing and Understanding the Host-to-HostUnderstanding Ethernet and Switch Subnets Communications Model


Operation Understanding the TCP/IP Transport Introducing LANsTroubleshooting Common Switch Media Layer Operating Cisco IOS SoftwareIssues Exploring the Functions of Routing Starting a SwitchUnderstanding IP Addressing and Subnets Configuring a Cisco Router Understanding Ethernet and SwitchUnderstanding the TCP/IP Transport Layer Exploring the Packet Delivery Process OperationExploring the Functions of Routing Enabling Static Routing Troubleshooting Common Switch MediaConfiguring a Cisco Router Managing Traffic Using ACLs IssuesExploring the Packet Delivery Process Enabling Internet Connectivity Understanding IP Addressing and SubnetsEnabling Static Routing Implementing Device Hardening Understanding the TCP/IP Transport LayerManaging Traffic Using ACLs Implementing Traffic Filtering with ACLs Exploring the Functions of RoutingEnabling Internet Connectivity Understanding IPv6 Configuring a Cisco RouterImplementing Device Hardening Configuring IPv6 Routing Exploring the Packet Delivery ProcessImplementing Traffic Filtering with ACLs Routing Between VLANs Enabling Static RoutingUnderstanding IPv6 Using a Cisco Network Device as a Managing Traffic Using ACLsConfiguring IPv6 Routing DHCP Server Enabling Internet ConnectivityRouting Between VLANs Troubleshooting VLAN Connectivity Implementing Device HardeningUsing a Cisco Network Device as a DHCP Building Redundant Switched Topologies Implementing Traffic Filtering with ACLs Server Improving Redundant Switched Understanding IPv6Troubleshooting VLAN Connectivity Topologies with EtherChannel Configuring IPv6 RoutingBuilding Redundant Switched Topologies Understanding Layer 3 Redundancy Routing Between VLANsImproving Redundant Switched Topologies Troubleshooting IPv6 Network Using a Cisco Network Device as a DHCPwith EtherChannel Connectivity ServerUnderstanding Layer 3 Redundancy Configuring Serial Encapsulation Troubleshooting VLAN ConnectivityTroubleshooting IPv6 Network Connectivity Establishing a WAN Connection Using Building Redundant Switched TopologiesConfiguring Serial Encapsulation Frame Relay Improving Redundant Switched TopologiesEstablishing a WAN Connection Using Introducing VPN Solutions with EtherChannelFrame Relay Configuring GRE Tunnels Understanding Layer 3 RedundancyIntroducing VPN Solutions Troubleshooting EIGRP Troubleshooting IPv6 Network ConnectivityConfiguring GRE Tunnels Implementing EIGRP for IPv6 Configuring Serial EncapsulationTroubleshooting EIGRP Multiarea OSPF IPv4 Implementation Establishing a WAN Connection UsingImplementing EIGRP for IPv6 Troubleshooting Multiarea OSPF Frame RelayMultiarea OSPF IPv4 Implementation Examining OSPFv3 Introducing VPN SolutionsTroubleshooting Multiarea OSPF Managing Cisco Devices Configuring GRE Tunnels Examining OSPFv3 Licensing Troubleshooting EIGRPManaging Cisco Devices Lab 1-2: Troubleshooting Switch Media Implementing EIGRP for IPv6 Licensing Issues Multiarea OSPF IPv4 ImplementationLab 1-2: Troubleshooting Switch Media Lab 2-1: Performing Initial Router Setup Troubleshooting Multiarea OSPFIssues and Configuration Examining OSPFv3 Lab 2-1: Performing Initial Router Setup and Lab 2-2: Connecting to the Internet Managing Cisco DevicesConfiguration Lab 3-1: Enhancing the Security of the LicensingLab 2-2: Connecting to the Internet Initial Configuration Lab 1-2: Troubleshooting Switch MediaLab 3-1: Enhancing the Security of the Initial Lab 3-2: Device Hardening IssuesConfiguration Lab 3-3: Filtering Traffic with ACLs Lab 2-1: Performing Initial Router SetupLab 3-2: Device Hardening Lab 4-1: Configure and Verify Basic IPv6 and ConfigurationLab 3-3: Filtering Traffic with ACLs Lab 4-2: Configure and Verify Stateless Lab 2-2: Connecting to the InternetLab 4-1: Configure and Verify Basic IPv6 Autoconfiguration Lab 3-1: Enhancing the Security of theLab 4-2: Configure and Verify Stateless Lab 4-3: Configure and Verify IPv6 Initial ConfigurationAutoconfiguration Routing Lab 3-2: Device HardeningLab 4-3: Configure and Verify IPv6 Routing Lab 5-1: Configuring Expanded Switched Lab 3-3: Filtering Traffic with ACLsLab 5-1: Configuring Expanded Switched Networks Lab 4-1: Configure and Verify Basic IPv6Networks Lab 5-2: Configuring DHCP Server Lab 4-2: Configure and Verify StatelessL

cisco ccna routing and switching boot camp (ccnax ...€¦ · cisco ccna routing and switching boot...

Documents