cir-m12 series databus connectors - cannon · veam cir-m12 series connectors ... • available with...

CIR-M12 SeriesDatabus ConnectorsCatalog

2ITT Cannon, LLC.www.ittcannon.com

All specifications are subject to change without notice. VEAM M12 Cat 112016

VEAM CIR-M12 Series Connectors

VEAM M12 Connectors at a Glance•TwoConnectorConfigurations › 1 way › 4 way•CustomizedContactConfigurations ›2-polecrimpandrepairable. ›4-Polecrimpandrepairable–performance up to Category 5 / 100 Mbps Ethernet ›8Polerepairable–performanceupto Category 7 / 10 Gbps Ethernet

The VEAM Difference:•Smaller footprint by combining multiple lines in the same connector•Suitable for harsh environment•Available with up to 500h salt spray resistant RoHSconductiveplating•Superiorshieldingperformance

The challenge As railway technology and safety standard advance, so must the electronics supporting applications like engine diagnostics, brake controls, environmental conditioning, passenger display systems, networking and lighting control. This coupled with the increasing demand for data grouping and through-put is why ITT VEAM was approached with this challenge. The customer requested an interconnect solutions to establish reliable connection between coaches. In particu-lar, these solution for data transmission must bundled multiple Ethernet, WTB and MVB lines into a singular connector while meeting all required regulations.

The solutionListening to our customer requests, ITT VEAM met the challenge by developing the CIR-M12 Series. This series is a combination of M12 contacts mounted into FRCIR connector series hardware. With this pioneering design, four conductor wires and the associated braid from shielded cables are integrated into the M12 contact. A

special plastic insert groups multiple M12 contacts and their cables into a singular connector. With this solution, the customer may now transfer local data from Ethernet, MVB, WTB, and Video lines, according to VG95234, within the same connector.

Applications

3- ELECTRIC COUPLERS

1- INTER- VEHICLES

4- DATA COMMUNICATION

2- CONVERTERS/ INVERTERS

3

4

2

1

3 ITT Cannon, LLC.www.ittcannon.com


VEAM’s retention clip provides secure retention of the contact in the insulator. In addition, through use of a specially designed tool, the contact is easily removed for harnessing.

The thermoplastic rigid insert material meets all the latest railway industry smoke and flame retardant standards.

The rubber coupling but design provides double insulation.

Our multipoint band technology provides 360 degrees of EMI shielding to ensure the integrity of the signal.

The innovative contact technology enables data bus signals to be interconnected in one operation

8 Poles inspectable and repairable contacts are designed to meet the requirements of Class F (cat 7-600Mhz) according to ISO/IEC 11801

Product Overview

•Contacts are; copper alloy material, & plastic inserts

•ConnectortypeFRCIRsize32(4way)orsize18(1way)

•Cablestested&qualifiedatfrequenciesof1MHz,

10MHz,&100MHz

› With Ethernet lines 100 ohm

› With MVB lines 120 ohm

•ShellsaccordingtoVG95234,whereapplicable

•Aluminium shells with black epoxy urethanic varnish

(RoHScompliant)

•Insertsareplasticmaterial,UL94-VOandmeet

NFF16-101/16-102andEN45545 standards

•MeetsIP67inamatedconditionwiththeappropriate

accessories

•OperatingTemperatureof-40°Cto100°C

•Supports gigabit communication

•Ethernet,MVB,WTBandVideoLines

•Flexibility to use 1 to 4 contacts with the same case

•Easyassemblyandharnessing

Features & Benefits

M12 test results shows highly reliable and stable connections with very low distortion & no signal loss.

CIR-M12 is IP67 rated in the mated position. The compo-nents are completely immune to shock and vibration and therefore ideal for harsh train and mass transit environments.

Available Options

•Rubbercoveredcouplingnut•Grommet•SpecialbackshellsforPGorMetricthreadadapter•Receptacles with accessories•Wirecabledcontacts



1 Way Receptacle

CIR-M12 Connector ConfigurationsConnector Receptacle and Plug Specifications

THIS

IS A

CA

D D

RAW

ING

. DO

NO

T M

AN

UA

LLY

REVI

SE

B A

INDEX CHANGE APP.ED

B AGH

DRAW

CHECKED DATE

DATE

DATE

APP.ED Tech. Manager

APP.ED Qual. Manager DATE

DATE

REF.

INDEXREVI

SIO

NS

PART NUMBER

DESCRIPTION

SCALE DIMENSIONS AND GEOMETRIESTOLLERANCES ACCORDING TO

ISO 2768 - fH

RoHS COMPLIANCE WEIGHT (gr.)

CPF

THIS DRAWING IS A CONTROLLED DOCUMENT FOR ITT VEAMIT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANISATION

SHOULD BE CONTACTED FOR THE LATEST REVISION.

THIS DRAWING CANNOT BE REPRODUCED OR PUBLISHED WITHOUT OUR WRITTEN AUTHORISATION

REV.ITT Cannon Veam Italy S.r.L.

Dwg.Typ.

(4x)3.2 +0.1 0

35±0

.2

35±0.2

27

27

29.2 +0.2 0 21 +0.5

0

A Added cable spec. DTREN 150002and cable diameter range A.P.

B 200Vac/250Vdc was 500Vac/700Vdc1000Vac was 2000Vac A.P.

C Added grommet and rear insert (alternative)500 was 2000; 100°C was 125°C. A.P.

Izzo Stefano

17/02/2012

17243 17303 1735421/03/2012 18/09/2012 17/01/2013

A B C

2:1

YES

V

102

A3

Receptacle connector

L24390

FRCIR00A18PM12-1ST39-D640 CIDENTIFICATION CODE: A 4072

MATERIALS / PLATINGShells Alluminum alloy black epoxyurethanic varnish (not conductive)

Insulator Thermoplastic material according to NFF16-101 - NFF16-102 (I2F2)and conform to UNI CEI 11170 LR4 requirement

Gaskets Silicone rubber (panel O-ring) and neoprene.

Contact n°1 female inspectionable M12 type for MB 380.F7.600 cable spec.and Alstom cable spec. DTREN150002

Grommet Chloroprene rubber

MECHANICAL / ENVIRONMENTAL CHARACTERISTICS

Operating temperature -40°C +100°C Protection degree IP67 (EN60529)Mating cycles 500 min. Corrosion resistance 500hrs salt sprayVibrations 20g from 10 to 2000Hz Contact Retention force

ELECTRICAL CHARACTERISTICS

Operating voltage 200Vac / 250Vdc Contacts rated current 3 Amps (at 20°C)Test voltage 1000Vac Contacts maximum current 10 Amps for 1msInsulation resistance 5000MOhm MIN.

OTHERS CHARACTERISTICS ACCORDING TO VG95234 SPECIFICATION WHERE APPLICABLE.

ALSTOM CODE N/A

A

B

C

CReal view

O-ring

Plastic dust cap

±0.2

Grommet

C

C

PANEL CUT-OUT

QXIM12S-4Female contact

A

Srinkable boot

Rear insert (alternative) C

27

27

75 max

23.05 +0.2 0

4 ±0.1

28.

9

30.8

0 -0.15

27

27

29.2 +0.2 0

44.5

Thr

ead

M20

x1.5

27.5

8

min

11

max

Cabl

e Ø

8-11

Real view

27

27

29.2 +0.2 0 21 +0.5

0

PANEL CUT-OUT

27

27

29.2 +0.2 0


A

Srinkable boot


44.5

8

min

11

max

O-ring

Plastic dust cap

±0.2

GrommetC

C

75 max

23.05 +0.2 0

4 ±0.1

28.

9

30.8

0 -0.15

Thr

ead

M20

x1.5

27.5

Cabl

e Ø

8-11

THIS

IS A

CA

D D

RAW

ING

. DO

NO

T M

AN

UA

LLY

REVI

SE

B A

INDEX CHANGE APP.ED

B AGH

DRAW

CHECKED DATE

DATE

DATE



DATE

REF.

INDEXREVI

SIO

NS

PART NUMBER

DESCRIPTION


ISO 2768 - fH


CPF





Dwg.Typ.

(4x)3.2 +0.1 0

35±0

.2

35±0.2

27

27

29.2 +0.2 0 21 +0.5

0



C Added grommet and rear insert (alternative)500 was 2000; 100°C was 125°C. A.P.

Izzo Stefano

17/02/2012

17243 17303 1735421/03/2012 18/09/2012 17/01/2013

A B C

2:1

YES

V

102

A3

Receptacle connector

L24390

FRCIR00A18PM12-1ST39-D640 CIDENTIFICATION CODE: A 4072

MATERIALS / PLATINGShells Alluminum alloy black epoxyurethanic varnish (not conductive)


Gaskets Silicone rubber (panel O-ring) and neoprene.

Contact n°1 female inspectionable M12 type for MB 380.F7.600 cable spec.and Alstom cable spec. DTREN150002

Grommet Chloroprene rubber






ALSTOM CODE N/A

A

B

C

CReal view

O-ring

Plastic dust cap

±0.2

Grommet

C

C

PANEL CUT-OUT


A

Srinkable boot


27

27

75 max

23.05 +0.2 0

4 ±0.1

28.

9

30.8

0 -0.15

27

27

29.2 +0.2 0

44.5

Thr

ead

M20

x1.5

27.5

8

min

11

max

Cabl

e Ø

8-11

Real view

27

27

29.2 +0.2 0 21 +0.5

0

PANEL CUT-OUT

27

27

29.2 +0.2 0


A

Srinkable boot


44.5

8

min

11

max

O-ring

Plastic dust cap

±0.2

GrommetC

C

75 max

23.05 +0.2 0

4 ±0.1

28.

9

30.8

0 -0.15

Thr

ead

M20

x1.5

27.5

Cabl

e Ø

8-11

MaterialandPlating

Shells Aluminumalloyblackepoxyurethanicvarnish(nonconductive)

Insulator ThermoplasticmaterialaccordingtoEN45545andNFF16-101-NFF16-102(I2F2)andconformtoUNICEI11170LR4requirement

Gaskets Siliconerubber(panelO-ringandcouplinggasket)andneoprene

Available Contact Configurations Crimped(2&4Pole)Inspectionablecontacts(2,4&8Pole)Contactsarenotsuppliedwithconnector.

Grommet Flameretardantrubber

Coupling Nut for 1 Way Plug Aluminumalloywithblackhardanodizing(nonconductive)“flameretardant”rubbercovered

Mechanical/Environmental Characteristics

OperatingTemperature -40°C+100°C

MatingCycles(Corrosionresistance) 2 Poles: 500 min. 4 Poles: 500 min. 8 Poles: 100 min.

Vibrations 20gfrom10to2000Hz

Electrical Characteristics

OperatingVoltage(3Ampsat20°C) 200Vac/250Vdc(contactsratedcurrent)

TestVoltage(10Ampsfor1ms) 1000Vac(contactsmaxcurrent)

Insulation Resistance 5000MOhmmin..

AverageWeight(gr.)

1 Way Receptacles 102 Plugs 120.6

4 Way Receptacles 207 Plugs 276



1 Way Plug

4 Way Receptacle

4 Way Plug

THIS

IS A

CA

D D

RAW

ING

. DO

NO

T M

AN

UA

LLY

REVI

SE

INDEX CHANGE APP.ED

B AGH

DRAW

CHECKED DATE

DATE

DATE



DATE

REF.

INDEXREVI

SIO

NS

PART NUMBER

DESCRIPTION


ISO 2768 - fH


CPF





Dwg.Typ.



C Added grommet and rear insert (alternative)500 was 2000; 100°C was 125°C A.P.

Izzo Stefano

14/10/2011

17243 17303 1735421/03/2012 18/09/2012 17/01/2013

A B C

2:1

YES

V

120.6

A3

Plug connector

L24410

FRCIR06AGG18PM12-1PT39-D640 CIDENTIFICATION CODE: A 4072

MATERIALS / PLATINGShells Alluminum alloy with black epoxyurethanic varnish (non conductive)


Coupling nut Alluminum alloy with black hard anodizing (non conductive) "�ame retardant"rubber covered

Gaskets Silicone rubber (coupling gasket) and neoprene.

Contact n°1 male inspectionable M12 type for MB 380.F7.600 cable spec.and Alstom cable spec. DTREN150002

Grommet Chloroprenic rubber






ALSTOM CODE AX01000635929

A

B

C

C

PRELIMINARY DRAWING

Real view

Plastic dust cap

Grommet

C

C

QXIM12P-4Male contact

A

Srinkable boot

Rear insert (alternative)

C

75 max

44.5

Thr

ead

M20

x1.5

27.5

8

min

. 1

1 m

ax

cab

le Ø

8-11

Plastic dust cap

GrommetC

C

75 max

Thr

ead

M20

x1.5

27.5

cab

le Ø

8-11

A


A

Srinkable boot


C

44.5

8

min

. 1

1 m

ax

49 ±0.5

43.5 ± 0.5

Real view

THIS

IS A

CA

D D

RAW

ING

. DO

NO

T M

AN

UA

LLY

REVI

SE

INDEX CHANGE APP.ED

B AGH

DRAW

CHECKED DATE

DATE

DATE



DATE

REF.

INDEXREVI

SIO

NS

PART NUMBER

DESCRIPTION


ISO 2768 - fH


CPF





Dwg.Typ.



C Added grommet and rear insert (alternative)500 was 2000; 100°C was 125°C A.P.

Izzo Stefano

14/10/2011

17243 17303 1735421/03/2012 18/09/2012 17/01/2013

A B C

2:1

YES

V

120.6

A3

Plug connector

L24410

FRCIR06AGG18PM12-1PT39-D640 CIDENTIFICATION CODE: A 4072

MATERIALS / PLATINGShells Alluminum alloy with black epoxyurethanic varnish (non conductive)


Coupling nut Alluminum alloy with black hard anodizing (non conductive) "�ame retardant"rubber covered

Gaskets Silicone rubber (coupling gasket) and neoprene.

Contact n°1 male inspectionable M12 type for MB 380.F7.600 cable spec.and Alstom cable spec. DTREN150002

Grommet Chloroprenic rubber






ALSTOM CODE AX01000635929

A

B

C

C

PRELIMINARY DRAWING

Real view

Plastic dust cap

Grommet

C

C


A

Srinkable boot


C

75 max

44.5

Thr

ead

M20

x1.5

27.5

8

min

. 1

1 m

ax

cab

le Ø

8-11

Plastic dust cap

GrommetC

C

75 max

Thr

ead

M20

x1.5

27.5

cab

le Ø

8-11

A


A

Srinkable boot


C

44.5

8

min

. 1

1 m

ax

49 ±0.5

43.5 ± 0.5

Real view

3 ,5 2 9 $ 1 2 $ /

%2 $ 5 2 / 2 &

6 2 ) 2 *

��

��

��

3 ,5 2 9 $ 1 2 $ /

%2 $ 5 2 / 2 &

6 2 ) 2 *

��

��

��

3 ,5 2 9 $ 1 2 $ /

%2 $ 5 2 / 2 &

5 2 %( & & + ,&

� ��

� ��

� ��3 ,5 2 9 $ 1 2 $ /

%2 $ 5 2 / 2 &

5 2 %( & & + ,&

� ��

� ��

� ��



3 ,5 2 9 $ 1 2 $ /

%2 $ 5 2 / 2 &

6 2 ) 2 *

��

��

��

2 Pole Crimped Contact

3 ,5 2 9 $ 1 2 $ /

%2 $ 5 2 / 2 &

6 2 ) 2 *

��

��

��

Contact Specifications

Materials/Plating

Shells(crimpversions) Goldplatedcopperalloy

Shells(inspectionableversions) Zincplatedzync-aluminiumalloy

Insulator ThermoplasticmaterialaccordingEN45545andUL94-V0

Clip,retentioncapandsupportsleeve ThermoplasticmaterialaccordingtoUNI11170-3(LR4),NFF16-101/102N2F2andEN45545

O-ring NBR rubber

Inner contacts 2and4Poles:Goldplatedcopperalloy,crimptypefor0.34-0.75sqmmwires8Poles:Goldplatedcopperalloy,crimptypeforAWG24wires

Mechanical & Environmental Characteristics

OperatingTemperature -40°C+100°C

Insulatordiameterofconductors(max.) 1.5mm(8-poles)-2.2mm(4-poles)-3.0mm(2-poles)

Cablediameter(max.) seepartnumberdescriptions

Matingcycles(min.) 100(8-poles)-500(2and4poles)

Corrosion resistance 200 h salt spray

Vibrations AccordingEN61373Cat.1ClassB

Retentionforce(5cycles) 100N(inspectionableversions)

Electrical Characteristics

Operatingvoltage 200Vac/250Vdc

Insulationresistance(min.) 5000MOhm

Test voltage 1000 Vac

Contactscurrent(max) 2A(8-pole)-10A(2and4-pole)

Contactsratedcurrent 3A(2and4-pole)

Transmission Performance

2-Pole contacts WTBaccordingIEC61375

4-Pole contacts MVBaccordingIEC61375 ClassDaccordingEN50173withCategory5ecables 100MbpsEthernet(100Base-TX)accordingIEEE"

8-Pole contacts ClassEaccordingEN50173withCategory6cables ClassEAaccordingEN50173withCategory6Acables ClassFaccordingEN50173withCategory7cables Upto10GbpsEthernet(10GBase-T)accordingIEEE"

Male Plug Contact Female Plug Contact

CIR-M12 Contact Configurations



2 Pole Inspectionable Contact

4 Pole Crimped Contact



3 ,5 2 9 $ 1 2 $ /

%2 $ 5 2 / 2 &

5 2 %( & & + ,&

��

��

��

3 ,5 2 9 $ 1 2 $ /

%2 $ 5 2 / 2 &

5 2 %( & & + ,&

��

��

��


3 ,5 2 9 $ 1 2 $ /

%2 $ 5 2 / 2 &

5 2 %( & & + ,&

� ��

� ��

� ��

3 ,5 2 9 $ 1 2 $ /

%2 $ 5 2 / 2 &

5 2 %( & & + ,&

� ��

� ��

� ��

3 ,5 2 9 $ 1 2 $ /

%2 $ 5 2 / 2 &

5 2 %( & & + ,&

��

��

��

3 ,5 2 9 $ 1 2 $ /

%2 $ 5 2 / 2 &

5 2 %( & & + ,&

��

��

��

3 ,5 2 9 $ 1 2 $ /

%2 $ 5 2 / 2 &

5 2 %( & & + ,&

��

��

�� 3 ,5 2 9 $ 1 2 $ /

%2 $ 5 2 / 2 &

5 2 %( & & + ,&

��

��

��




© 2016 ITT Inc.ITT Cannon M12 Short Cat 201611

The“ITTEngineeredBlocks“symbol,“Engineeredforlife”,“ITT”and“VEAM“areregisteredtrademarksofITTInc.Specificationandotherdataarebasedoninformationavailableatthetimeofprinting,andaresubjecttochangewithoutnotice.

North America56 Technology Drive Irvine,CA92618Phone: 1.800.854.3208

Connect with your ITT Interconnect Solutions representative today or visit us at www.ittcannnon.com

EuropeItalyCorso Europa 41/43I-20020Lainate(MI)ItalyPhone:+39.02938721

AsiaTuopandunIndustrialArea,JindaCheng,XinerVillage,ShajingTown,BoanDistrict,ShenzhenCity,GuangdongProvince,China518215Phone:+86.755.2726.7238

GermanyCannonstrasse 1D–71384Weinstadt,GermanyPhone:+49.7151.699.0

Number of Poles TX-2Poles,QX-4Poles,EX-8Poles

Contact Type I - InspectionableLeaveblankforcrimpedcontacts

Connector Series M12 - CIR M12 Connector Series

ContactGender P - Male Contacts or S - Female Contacts

CableDiameter(max)

2PolesCrimped:1-for8.5mm;2-for9.1mm2 Poles Inspectionable: 2 - for 8.8 mm4PolesCrimped:1-for7.7mm;2-for8.5mm;3-for6.7mm4 Poles Inspectionable: 2 - for 8.8 mm; 4 - 10.8 mm8 Poles Inspectionable: 2 - for 8.8 mm

M12 Connector Part Number Configuration:

Prefix FRFlameRetardant

Connector Series CIR Bayonet Coupling

Shell Style* 030-Rearpanelmountreceptacle,rearthread06- Straight plug connector

Environmental Class* Classisbasedonbackshelltype,sealingcapability&accessories.

ShellSize/ContactType 32PM12-PlasticInsert,size32,forM12Contacts

Insert Arrangement 4 Cavities, 1 ÷ 4 Contacts

ContactGender P - Male Contacts or S - Female Contacts

Alternate Insert Rotations -W,X

PlatingCode T39-Blackepoxyurhetanicvarnish-RoHScompliantT108 - Zinc/cobalt Ecoblack - RoHS compliant

Modifications VO-ContactsnotsuppliedXXXX-Accordingtocustomapplication,consultfactory

FR CIR 06 R 32PM12 4 W- TXXP V0-XXXX

CIR-M12 Connectors Ordering Guide

TX M12 PI 2

M12 Contact Part Number Configuration:

cir-m12 series databus connectors - cannon · veam cir-m12 series connectors ... • available with...

Documents