cincinnati_profiler_4p_11-15 v5
TRANSCRIPT
Cincinnati ProfilersMulti-spindle gantries for the aerospace industry
Metal Cutting | Composites
Fives is the supplier of choice for aircraft producers all over the world
Fives sets the standard for a erospace profilers, continuing a tradition built upon decades of experience. With over 650 profilers in the field, there isn’t a commercial aircraft flying that hasn’t been touched by a Cincinnati Profiler.
Cincinnati Profiler benefits: – Precision accuracy, innovation, and lowest cost-per-piece manufacturing– Equipment designed and built to your specifications – Heavy duty, rugged platforms that maximize metal removal Contact Us:
Fives Cincinnati T: +1 859 534 4600 2200 Litton Lane [email protected] Hebron, KY 41048 www.fivesgroup.com
Copy
right
© 2
014
– Fi
ves
Cinc
inna
ti –
All r
ight
s re
serv
ed
Technical specifications
Aluminum | Composites Steel | Titanium
HP Profiler XP Profiler WR Profiler XT Profiler (3X) XT Profiler (5X)
Range
X-axis (minimum) 4267 mm 9144 mm 4267 mm
X-axis (incremental) 3658 mm 6096 mm 3658 mm
Y-axis – 3 spindle, 40” CD 2542 mm 3150 mm, 4165 mm 3683 mm
Y-axis – 3 spindle, 60” CD N/A 3683 mm N/A
Y-axis – 3 spindle, 80” CD 4165 mm 4165 mm N/A
Y-axis – 3 spindle, 100” CD 3150 mm N/A N/A
Y-axis – 4 spindle, 40” CD N/A 3683 mm N/A
Y-axis – 4 spindle, 60” CD N/A 3150 mm N/A
Y-axis – 4 spindle, 75” CD 2515 mm N/A N/A N/A
Y-axis – 5 spindle, 40” CD N/A 3683 mm
Z-axis 711 mm 750 mm 711 mm
A-axis ±30 degrees ±40 degrees ±30 degrees N/A ±30 degrees
B-axis ±30 degrees ±40 degrees ±30 degrees N/A ±30 degrees
Speed
X-axis 15240 mm/min 25400 mm/min 15240 mm/min
Y-axis 15240 mm/min 25400 mm/min 10160 mm/min
Z-axis 5080 mm/min 25400 mm/min 2540 mm/min
A-axis 450 dpm 2400 dpm 300 dpm N/A 700 dpm
B-axis 450 dpm 2400 dpm 300 dpm N/A 700 dpm
Spindle type #1
Speed (maximum) 10000 rpm 20000 rpm 7000 rpm
Power (S1) 75 kW 85 kW 52 kW
Torque (S1) 150 Nm 84 Nm 1345 Nm
Taper ANSI 50 HSK-100A ANSI 50, HSK-100A, KM4X-100
Spindle type #2
Speed (maximum) N/A 3500 rpm
Power (S1) N/A 52 kW
Torque (S1) N/A 2523 Nm
Taper N/A ANSI 60, HSK-125A, KM4X-125
Cincinnati HP Profilers — High Performance
Cincinnati XP Profilers — eXtreme Performance
Cincinnati WR Profilers — Wide Range
Cincinnati XT Profilers — eXtreme Torque
Highlights of the Cincinnati XT Profiler: – 3- and 5-axis options – Choice of spindles – Designed and optimized for unmatched hard metal machining– Only multi-spindle platform available for titanium roughing
Highlights of the Cincinnati HP Profiler: – 5-axis A/B bathtub – Structurally robust spindles – Designed and optimized for aluminum applications
Highlights of the Cincinnati WR Profiler: – 5-axis platform – Choice of spindles – Designed to accommodate a wide range of materials,
or for dedicated hard metal machining
Highlights of the Cincinnati XP Profiler: – 5-axis, A/B heads – High-speed, high-power spindles – Ideal for continuous, high-power machining of aluminum– Delivers extreme speed & responsiveness
ALUMINUM ALUMINUM | STEEL | TITANIUM
ALUMINUM STEEL | TITANIUM
The Cincinnati HP Profiler is offered in 3- and 4-spindle configurations with center distances up to 2.54 m (100 in). The 10,000 rpm spindle is extremely rugged to provide many years of service.
Product advantages– Full 5-axis contouring– Unitary A/B structure with ±30 degrees of travel– 3 or 4 spindles: 10000 rpm, 75 kW (100 hp), ANSI 50– Spindle distances up to 2.54 m (100 in)– Vertical configuration for lowest capital investment– Siemens 840D Solution Line control is standard– Spindle center distance up to 100”– 60 deg (± 30 deg) rotation in A-and B- axis allows for
fewer setups
As the newest profiler design, this best-in-class machine platform offers high efficiency machining for both thin and thick plate processing of large, aluminum structural components such as ribs, bulkheads, plate, frames, stringers, and spars.
Product advantages– Full 5-axis contouring– A/B rotary heads with ±40 degrees of travel– 2 spindles: 20000 rpm, 85 kW (114 hp), HSK-100A– Spindle distance up to 2.54 m (100 in)– Vertical configuration for lowest capital investment – Siemens 840D Solution Line control is standard – Available with 1016 mm (40 in), 1905 mm (75 in), 2032 mm (80 in)
or 2540 mm (100 in) spindle center distances - 80 deg (± 40 deg) rotation in A- and B- axis allows for fewer setups
The Cincinnati WR Profiler is offered in 3-, 4- and 5- spindle configurations with center distances up to 2.03 m (80 in). For manufacturers that process multiple materials, the 7000 rpm spindle provides the power and speed to cut aluminum, steel, and titanium. For hard metal shops, the 3500 rpm high-torque spindle is ideal.
Product advantages– Full 5-axis contouring– Unitary A/B structure with ±30 degrees of travel– 3 or 4 spindles: 52 kW (70 hp) 1414 Nm – 7000 rpm, 1414 Nm (1044 ft-lbs),
ANSI 50, HSK-100A, KM4X100 – 3500 rpm, 2520 Nm (1860 hp),
ANSI 60, HSK-125A– Spindle distances up to 2.03 m (80 in)– Designed and optimized for a wide range of material types– Vertical configuration for lowest capital investment– Siemens 840D Solution Line control is standard– X-axis travel, unlimited.
The Cincinnati XT Profiler is offered in 3- and 5-axis configurations with up to 5 spindles. For manufacturers that process multiple materials, the 7000 rpm spindle provides the power and speed to cut aluminum, steel, and titanium. For hard metal shops, the 3500 rpm high-torque spindle is ideal.
Product advantages– Full 5-axis contouring or 3-axis roughing– A/B rotary axis head with ±30 degrees of travel– 3 or 5 spindles: 52 kW (70 hp) – 7000 rpm, 1345 Nm (986 ft-lbs),
ANSI 50, HSK-100A, KM4X100 – 3500 rpm, 2523 Nm (1860 hp),
ANSI 60, HSK-125A– Spindle distances up to 2.03 m (80 in)– Designed and optimized for steel and titanium– Vertical configuration for lowest capital investment– Siemens 840D Solution Line control is standard– Unmatched structural dynamic stiffness
XT sets MRR record, machining titanium at over 100 cubic IPM
Cuts machining time up to 80% for aerospace aluminum parts
Only machine that can simultaneously cut three 100” parts