CIMON TOUCH2006. 01

KDT SYSTEMS

Introduction

Excellent Durability The mobile CPU of the TOUCH gives excellent

durability under industrial environment. Fanless cooling system make the TOUCH more

durable.

Various I/O Channels Ethernet Ports Serial Ports Parallel Port USB Ports VGA Port Keyboard/Mouse Port

KDT SYSTEMS

Introduction

CIMON HMI included The CIMON TOUCH includes The CIMON

HMI/SCADA If you choose a CIMON TOUCH for your SCADA

system, you can reduce cost,

CIMON-HMI S/W 내장

Touch Panel Computer

KDT SYSTEMS

Introduction

Interconnection The CIMON TOUCH can connect with upper

system (i.e. DBMS or SCADA) The CIMON TOUCH can communicate with various

field controllers.

KDT SYSTEMS

Introduction

Useful Applications Line/Facility monitoring Roll of Cell PC: gather data and store it You can install any software you want

KDT SYSTEMS

Specification

TOUCH T12CS T12CH T15CS T15CH T15CX T15CP

CPU VIA Eden ESP 10000 1GHz

RAM DDR-SDRAM 512MB PC3200 DDR400

Graphic Chip

UniChrome Pro IGP integrated in VIA CN400 VT8625

Display

12.1" TFT LCD 15" TFT LCD

CRT output(15P DSUB)

CRT output (15P DSUB)

Touch Panel12.1 " 5Wire

Resistive15" 5Wire Resistive

KDT SYSTEMS

Specification

TOUCH T12CS T12CH T15CS T15CH T15CX T15CP

StorageCF

2GBHDD40GB

CF2GB

HDD40GB

PS/2 Keyboard / Mouse

USB USB 2.0 x 4

Audio Port Audio Out x 1

Power 100 ~ 240 VAC

KDT SYSTEMS

Specification

TOUCH T12CS T12CH T15CS T15CH T15CX T15CP

Ethernet 10 BASE-T/100 BASE-TX x 110BaseT/

100BaseTX x 2

Serial Port

RS-232/422/485 x 1RS-232/422/485 x

1

RS-232 x 1 RS-232 x 3

Parallel Port

No Yes

CD-ROM No Yes

PCI Slot No Yes

KDT SYSTEMS

Hardware: CPU

CPU: VIA Eden ESP 10000Speed: 1.0 GHzFSB: 133 MHzThe maximum power requirement of CPU is

7W. This CPU is fit to fanless system.

KDT SYSTEMS

Hardware: Memory

North Bridge: VIA CN400Capacity: 512 MB (up to 1GB)Type: DDR-SDRAM PC3200 DDR

400MHzThe maximum data transfer rate is

3,200MB/sec. A Hi-speed memory make all software more faster.

KDT SYSTEMS

Hardware: Graphic

UniChrome Pro IGP integrated in VIA CN400 VT8625

Graphic Memory: 32 MB sharedIt’s powerful graphic performance

make the CIMON TOUCH play two MPEG4 video files at a time.

KDT SYSTEMS

Hardware: LCD Panel

TFT LCD Panel from LG.Philips LCDResolution: 1,024 x RGB x 768 Number of Colors: 16.2M (15”)Number of Colors: 262,144 (12.1”)

KDT SYSTEMS

Hardware: Touch Panel

5 wire resistive type touch panelHigh Optical Transmittance: 80%Durability

Surface Scratching: 1million times (250gf,60mm/s) Surface Pitting: 35,000,000times(250gf, 2times/s)

A USB touch panel controller is included.

KDT SYSTEMS

Hardware: Storage

CF: 2GB (T12CS, T15CS)

HDD: 40GB (T12CH, T15CH, T15CX, T15CP)

A anti-shock HDD bracket protects HDD from mechanical vibration and shock.

KDT SYSTEMS

Hardware: VGA Port

One VGA Port to connect with a CRT.If you connect with a CRT, CRT

displays a image same as LCD.If you extend your desktop using

Windows desktop extension function, CRT displays a part of extended desktop view.

KDT SYSTEMS

Hardware: USB

Four USB 2.0 ports are include.You can connect and access USB

mass storages.The CIMON TOUCH can boot from

USB-DRIVE, USB-CD, USB-FDD, USB-HDD

Various external storages can be used.

KDT SYSTEMS

Hardware: Ethernet

10 BaseT / 100 BaseTX You can choose T15CX or T15CP to use tw

o channels of Ethernet.

KDT SYSTEMS

Hardware: Ethernet

If you choose T15CX or T15CP which has two channels of Ethernet, you can separate a network for computer systems and a network for field controller to distribute and reduce network data traffic.

KDT SYSTEMS

Hardware: Serial Port

One RS-232/422/485 Convertible Port.One more RS-232 Port

T12CS, T12CH, T15CS, T15CH

Three more RS-232 Ports T15CX, T15CP

KDT SYSTEMS

Hardware: RS-232/422/485

You can select one of RS-232/422/485 using function select switch.

It is easy to cable to plug type 5P connector for RS-422/485 communication.

KDT SYSTEMS

Hardware: RS-485

RS-485 auto toggle function is supported.

You can select the delay time after transmitting last data to closing channel in three step using DIP switch.

You can connect or disconnect internal termination resister using DIP switch.

KDT SYSTEMS

Hardware: T15CX & T15CP

Parallel Port 1CH: T15CX, T15CP If you want to use parallel port to connect a

printer, you must choose T15CX or T15CP. One of SPP/Bi-Directional, EPP/SPP, ECP, ECP/EPP

can be selected.

CD-ROM: T15CP If you want to use CD-ROM, you must choose

T15CP

One PCI slot: T15CP If you want to use PCI card, you must choose

T15CP

KDT SYSTEMS

HMI for TOUCH

The CIMON TOUCH include the CIMON HMI for TOUCH only.

This type of HMI works properly only in the CIMON TOUCH

If you install and run it, HMI run in demo mode.

Users must install HMI for TOUCH to CIMON TOUCH.

KDT SYSTEMS

OS: Windows XP Embedded

Windows XP Embedded (XPE) is a kind of Microsoft Windows XP Professional for embedded systems.

Components of XPE are identical with those of XP Professional.

XPE has EWF to protect disk volume.

KDT SYSTEMS

OS: EWF

EWF is a powerful function to protect disk volume supplied by XPE.

EWF is more reliable than such a solution of third party.

EWF commit help you to use EWF function.

KDT SYSTEMS

OS: EWF

When you will setup Windows, install programs or write files on C: volume, new data will be stored in EWF volume not in C: volume.

If you will restart TOUCH/PPC, old data will be restored in C: volume.

If you want to save new data, you must run EWF commit. Then the TOUCH/PPC will be restart and new data will be saved.

KDT SYSTEMS

OS: EWF

After installing program, run EWF commit without reboot. If you don’t, installed program will be removed.

After change Windows configuration, run EWF commit. If you don’t, changed configuration will be removed.

After creating new files or folders, run EWF commit. If you don’t, new files or folders will be removed.

KDT SYSTEMS

Reliability

Operation Temperature: 0~50 ℃ High temperature test: CPU usage 100%, 60℃,

24hours Low temperature test: Start at -10℃

EWF function test ON/OFF test: 10,000 time without file system fail

Anti shock HDD bracket Start after dropping 1m height, each 5 direction,

10 times