8/14/2019 cidco rate list

1/1

CIDCO MATERIAL TESTING LA BORATORYSHOP NO.D-001,002,003,CLINIC, GROUND FLOOR, HIGHWAY SIDE, SANPADA RAILWAY STATION COMPLEX

SCHEDULE OF TESTING CHARGES PER SAMPLEW. E. F. 01.05.06

Sr. No. Particulars of test

Rate forCIDCO

Departmental

Samples

Rate for

outside

Samples

Min. size of Sample required

1 Soil / Murum Testing:

a) Set of tests viz. M.D.D. and O.M.C. 200.00 300.00 One bagb) Liquid limit, plasticity index, etc. 500.00 750.00 One bagc) Field density test( Sand Replacemt.method) 100.00 150.00 FIELD TEST

2 Cement testing:

Fineness, consistancy, initial & final setting time &

compressive strength etc.660.00 990.00 10 Kg.

3 Coarse Aggregate Testing:

a)Flakiness index, Elongation index, Combined

index.450.00 675.00 200 Pieces of each fraction OR Five bags

b)Gradation, Abrasion value, Impact value, Waterabsorption etc

500.00 750.00 One bag

4 Fine Aggr. Testing: (SAND)

a) Fineness Modulus/Sieve Analysis. 50.00 75.00 10 Kgb) Silt Content Test. 50.00 75.00 5 Kg

5 Concrete Testing:

a) Compressive Strength Test(CUBE) 60.00 90.00 One sample = 3 Cubesb) Mix design including ingradient test 2000.00 3000.00 Two bags of each ingradient per MIX

c) N.D.T. - U.S.P.V. Test. 2000.00 3000.00

e) Permeability Test. 562.00 844.00 One Cylindrical Cube per sample6 Steel Testing : (Wt. variation, Ultimate Tensile

Strength , % Elongation, Bend-Rebend test)435.00 653.00

One sample = 3 Nos of each diameter of

one m length

7 Brick/Concrete Block Testing:

a) Brick-Water Abn. & Comp. Strength 320.00 480.00 10 Bricks

b)Con.Block-Water Ab.& Comp.Stren. 380.00 570.00 8 Blocks8 G.I. Pipe Testing : Wt./Rmt,Thickness, Internal

Diameter of G.I. Pipe . 100.00 150.00 One m pipe per sample

9 Tile Testing:

a) Flexural Strength 185.00 278.00 One sample = 6 Tiles

b) Water Absorption 295.00 442.00 One sample = 6 Tilesc) Resistance to wear 625.00 938.00 One sample = 6 Pieces of size 7cm x 7cm

10 Water Testing (PH Value/Cholride/Sulphite) 300.00 450.00 One lit. sealed bottle per sample

11 Metal Testing:

a) Gradation, Abrasion Value, Impact Value & Water

Absorption,500.00 750.00 One bag per sample

b)Flakiness index, Elongation index & Combined

index etc.for all samples450.00 675.00 200 Pieces of each fraction OR Five bags

c) Gradation for W.M.M. 50.00 75.00 One bag per sample

d) Gradation for G.S.B. 50.00 75.00 One bag per sample12 Test for Bitumen/Asphalt:

a) Bitumen Extraction 240.00 360.00 5 Kg

b) Sieve Analysis/Gradation 50.00 75.00 5 Kgc) Penetration / Grade of Bitumen 135.00 203.00 1 Kg.d) Stripping value of Road Aggregates 240.00 360.00 5 Kg

LABORATORY-IN-CHARGE

* In addition to above Rates, Service Tax will be applicable as per the Government Rule.

SANPADA, NAVI MUMBAI WE MAKE CITIES